- usb-ftdi_sio-add-support-for-domintell-devices.patch removed from -mm tree

- usb-ftdi_sio-add-support-for-domintell-devices.patch removed from -mm tree

[akpm]

The patch titled
     usb: ftdi_sio: add support for Domintell devices
has been removed from the -mm tree.  Its filename was
     usb-ftdi_sio-add-support-for-domintell-devices.patch

This patch was dropped because it was merged into mainline or a subsystem tree

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: usb: ftdi_sio: add support for Domintell devices
From: Gaetan Carlier <gcpatch@gmail.com>

Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01
module.  PIDs were missing.

Signed-off-by: Gaetan Carlier <gcpatch@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/usb/serial/ftdi_sio.c |    2 ++
 drivers/usb/serial/ftdi_sio.h |    4 ++++
 2 files changed, 6 insertions(+)

diff -puN drivers/usb/serial/ftdi_sio.c~usb-ftdi_sio-add-support-for-domintell-devices drivers/usb/serial/ftdi_sio.c
--- a/drivers/usb/serial/ftdi_sio.c~usb-ftdi_sio-add-support-for-domintell-devices
+++ a/drivers/usb/serial/ftdi_sio.c
@@ -655,6 +655,8 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff -puN drivers/usb/serial/ftdi_sio.h~usb-ftdi_sio-add-support-for-domintell-devices drivers/usb/serial/ftdi_sio.h
--- a/drivers/usb/serial/ftdi_sio.h~usb-ftdi_sio-add-support-for-domintell-devices
+++ a/drivers/usb/serial/ftdi_sio.h
@@ -839,6 +839,10 @@
 /* Rig Expert Ukraine devices */
 #define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
 
+/* Domintell products  http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
+#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
_

Patches currently in -mm which might be from gcpatch@gmail.com are