From: Marek Vasut <marek.vasut@gmail.com>
To: Anand Gadiyar <gadiyar@gmail.com>
Cc: David Brownell <david-b@pacbell.net>, linux-omap@vger.kernel.org
Subject: Re: [patch 2.6.27-rc8-omap 0/7] resend of pending TWL patches
Date: Fri, 3 Oct 2008 19:59:16 +0200 [thread overview]
Message-ID: <200810031959.16276.marek.vasut@gmail.com> (raw)
In-Reply-To: <57969b5c0810031038w34f02dafxbc664f58cf5965ba@mail.gmail.com>
On Friday 03 of October 2008 19:38:51 Anand Gadiyar wrote:
That's nothing new in David's case ;-) (dont consider this an insult)
> (Hit reply instead of reply-all... Reminder to self. Never send emails
> when you're sleepy)
>
> On Fri, Oct 3, 2008 at 11:06 PM, Anand Gadiyar <gadiyar@gmail.com> wrote:
> > On Fri, Oct 3, 2008 at 10:12 PM, David Brownell <david-b@pacbell.net>
wrote:
> >> On Friday 03 October 2008, David Brownell wrote:
> >>> This flushes my queue of TWL (and related) patches that
> >>> seem ready to merge:
> >>
> >> Sanity tested on Beagle, FYI.
> >>
> >> Where I observed a new oddity: the boot hung right after
> >> listing the MTD partitions. Which is where the EHCI code
> >> would come up ... took that driver out of the build, and
> >> the hang went away. Clue, oh clue; where art thou?
> >
> > Well... Any chance this bit of code here helps? This infinite loop
> > shouldn't even have been here. Oh well.
> >
> >
> > ====CUT_HERE=====
> > Remove infinite loop in DPLL 5 programming. Ideally, DPLL5 should be
> > taken care of by the clock framework.
> > ---
> > drivers/usb/host/ehci-omap.c | 2 ++
> > 1 files changed, 2 insertions(+)
> >
> > Index: linux-omap-2.6/drivers/usb/host/ehci-omap.c
> > ===================================================================
> > --- linux-omap-2.6.orig/drivers/usb/host/ehci-omap.c 2008-09-18
> > 14:59:34.000000000 +0530
> > +++ linux-omap-2.6/drivers/usb/host/ehci-omap.c 2008-09-18
> > 15:00:09.737475758 +0530
> > @@ -170,10 +170,12 @@ static int omap_start_ehc(struct platfor
> > (7 << OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT),
> > PLL_MOD, OMAP3430ES2_CM_CLKEN2);
> >
> > +#if 0
> > while (!(cm_read_mod_reg(PLL_MOD, CM_IDLEST2) &
> > OMAP3430ES2_ST_PERIPH2_CLK_MASK))
> > dev_dbg(hcd->self.controller, "idlest2 = 0x%x\n",
> > cm_read_mod_reg(PLL_MOD, CM_IDLEST2));
> > +#endif
> > /* End DPLL5 programming */
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-10-03 17:54 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-03 15:57 [patch 2.6.27-rc8-omap 0/7] resend of pending TWL patches David Brownell
2008-10-03 16:42 ` David Brownell
[not found] ` <57969b5c0810031036q55075fdbw259159757f25c863@mail.gmail.com>
2008-10-03 17:38 ` Anand Gadiyar
2008-10-03 17:59 ` Marek Vasut [this message]
2008-10-06 6:41 ` Tony Lindgren
2008-10-06 23:26 ` David Brownell
2008-10-12 4:33 ` Steve Sakoman
2008-10-12 6:43 ` David Brownell
2008-10-12 13:21 ` Woodruff, Richard
2008-10-12 16:45 ` Pandita, Vikram
2008-10-12 17:24 ` David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200810031959.16276.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=david-b@pacbell.net \
--cc=gadiyar@gmail.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.