All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Mundt <lethal@linux-sh.org>
To: Dmitry Torokhov <dtor@mail.ru>,
	linux-input@vger.kernel.org, linux-sh@vger.kernel.org
Subject: Re: [PATCH] input: gpio_keys: Polling mode support.
Date: Tue, 28 Oct 2008 19:18:57 +0900	[thread overview]
Message-ID: <20081028101857.GA25523@linux-sh.org> (raw)
In-Reply-To: <20081021083816.GA29345@linux-sh.org>

Ping.

On Tue, Oct 21, 2008 at 05:38:16PM +0900, Paul Mundt wrote:
> This implements an optional polling mode for the gpio_keys driver,
> necessary for GPIOs that are not able to generate IRQs.
> 
> Polling mode is done device granular, and can not be toggled for
> individual GPIOs in order to maintain simplicity. Platforms with both
> IRQ capable and incapable GPIOs are required to register multiple
> times, once for each case.
> 
> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
> 
> ---
> 
>  drivers/input/keyboard/Kconfig     |    1 
>  drivers/input/keyboard/gpio_keys.c |   91 ++++++++++++++++++++++++++++---------
>  include/linux/gpio_keys.h          |    1 
>  3 files changed, 72 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index efd70a9..a8cefe9 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -283,6 +283,7 @@ config KEYBOARD_AAED2000
>  config KEYBOARD_GPIO
>  	tristate "GPIO Buttons"
>  	depends on GENERIC_GPIO
> +	select INPUT_POLLDEV
>  	help
>  	  This driver implements support for buttons connected
>  	  to GPIO pins of various CPUs (and some other chips).
> diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
> index 05f3f43..412a10d 100644
> --- a/drivers/input/keyboard/gpio_keys.c
> +++ b/drivers/input/keyboard/gpio_keys.c
> @@ -1,7 +1,8 @@
>  /*
> - * Driver for keys on GPIO lines capable of generating interrupts.
> + * Driver for keys on GPIO lines, either IRQ-driven or polled.
>   *
>   * Copyright 2005 Phil Blundell
> + * Copyright 2008 Paul Mundt
>   *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License version 2 as
> @@ -9,7 +10,6 @@
>   */
>  
>  #include <linux/module.h>
> -
>  #include <linux/init.h>
>  #include <linux/fs.h>
>  #include <linux/interrupt.h>
> @@ -22,7 +22,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/input.h>
>  #include <linux/gpio_keys.h>
> -
> +#include <linux/input-polldev.h>
>  #include <asm/gpio.h>
>  
>  struct gpio_button_data {
> @@ -32,7 +32,8 @@ struct gpio_button_data {
>  };
>  
>  struct gpio_keys_drvdata {
> -	struct input_dev *input;
> +	struct gpio_keys_platform_data *pdata;
> +	struct input_polled_dev *poll_dev;
>  	struct gpio_button_data data[0];
>  };
>  
> @@ -54,6 +55,33 @@ static void gpio_check_button(unsigned long _data)
>  	gpio_keys_report_event(data);
>  }
>  
> +static void gpio_handle_button_event(struct gpio_keys_button *button,
> +				     struct gpio_button_data *bdata)
> +{
> +	if (button->debounce_interval)
> +		mod_timer(&bdata->timer,
> +			jiffies + msecs_to_jiffies(button->debounce_interval));
> +	else
> +		gpio_keys_report_event(bdata);
> +}
> +
> +static void gpio_keys_poll(struct input_polled_dev *dev)
> +{
> +	struct gpio_keys_drvdata *ddata = dev->private;
> +	struct gpio_keys_platform_data *pdata = ddata->pdata;
> +	int i;
> +
> +	for (i = 0; i < pdata->nbuttons; i++) {
> +		struct gpio_keys_button *button = &pdata->buttons[i];
> +		struct gpio_button_data *bdata = &ddata->data[i];
> +
> +		bdata->input = dev->input;
> +		bdata->button = button;
> +
> +		gpio_handle_button_event(button, bdata);
> +	}
> +}
> +
>  static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
>  {
>  	struct gpio_button_data *bdata = dev_id;
> @@ -61,11 +89,7 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
>  
>  	BUG_ON(irq != gpio_to_irq(button->gpio));
>  
> -	if (button->debounce_interval)
> -		mod_timer(&bdata->timer,
> -			jiffies + msecs_to_jiffies(button->debounce_interval));
> -	else
> -		gpio_keys_report_event(bdata);
> +	gpio_handle_button_event(button, bdata);
>  
>  	return IRQ_HANDLED;
>  }
> @@ -74,6 +98,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  {
>  	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
>  	struct gpio_keys_drvdata *ddata;
> +	struct input_polled_dev *poll_dev;
>  	struct input_dev *input;
>  	int i, error;
>  	int wakeup = 0;
> @@ -81,14 +106,19 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  	ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
>  			pdata->nbuttons * sizeof(struct gpio_button_data),
>  			GFP_KERNEL);
> -	input = input_allocate_device();
> -	if (!ddata || !input) {
> +	poll_dev = input_allocate_polled_device();
> +	if (!ddata || !poll_dev) {
>  		error = -ENOMEM;
>  		goto fail1;
>  	}
>  
>  	platform_set_drvdata(pdev, ddata);
>  
> +	poll_dev->private = ddata;
> +	poll_dev->poll = gpio_keys_poll;
> +	poll_dev->poll_interval = 50; /* msec */
> +
> +	input = poll_dev->input;
>  	input->name = pdev->name;
>  	input->phys = "gpio-keys/input0";
>  	input->dev.parent = &pdev->dev;
> @@ -98,7 +128,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  	input->id.product = 0x0001;
>  	input->id.version = 0x0100;
>  
> -	ddata->input = input;
> +	ddata->poll_dev = poll_dev;
> +	ddata->pdata = pdata;
>  
>  	for (i = 0; i < pdata->nbuttons; i++) {
>  		struct gpio_keys_button *button = &pdata->buttons[i];
> @@ -127,6 +158,15 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  			goto fail2;
>  		}
>  
> +		input_set_capability(input, type, button->code);
> +
> +		/*
> +		 * Skip the IRQ setup and wakeup source initialization if
> +		 * we are going to be polled.
> +		 */
> +		if (pdata->polling)
> +			continue;
> +
>  		irq = gpio_to_irq(button->gpio);
>  		if (irq < 0) {
>  			error = irq;
> @@ -151,11 +191,12 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  
>  		if (button->wakeup)
>  			wakeup = 1;
> -
> -		input_set_capability(input, type, button->code);
>  	}
>  
> -	error = input_register_device(input);
> +	if (pdata->polling)
> +		error = input_register_polled_device(poll_dev);
> +	else
> +		error = input_register_device(input);
>  	if (error) {
>  		pr_err("gpio-keys: Unable to register input device, "
>  			"error: %d\n", error);
> @@ -168,7 +209,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  
>   fail2:
>  	while (--i >= 0) {
> -		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
> +		if (!pdata->polling)
> +			free_irq(gpio_to_irq(pdata->buttons[i].gpio),
> +				 &ddata->data[i]);
>  		if (pdata->buttons[i].debounce_interval)
>  			del_timer_sync(&ddata->data[i].timer);
>  		gpio_free(pdata->buttons[i].gpio);
> @@ -176,7 +219,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, NULL);
>   fail1:
> -	input_free_device(input);
> +	input_free_polled_device(poll_dev);
>  	kfree(ddata);
>  
>  	return error;
> @@ -186,20 +229,26 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
>  {
>  	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
>  	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
> -	struct input_dev *input = ddata->input;
> +	struct input_polled_dev *poll_dev = ddata->poll_dev;
>  	int i;
>  
>  	device_init_wakeup(&pdev->dev, 0);
>  
>  	for (i = 0; i < pdata->nbuttons; i++) {
> -		int irq = gpio_to_irq(pdata->buttons[i].gpio);
> -		free_irq(irq, &ddata->data[i]);
> +		if (!pdata->polling) {
> +			int irq = gpio_to_irq(pdata->buttons[i].gpio);
> +			free_irq(irq, &ddata->data[i]);
> +		}
> +
>  		if (pdata->buttons[i].debounce_interval)
>  			del_timer_sync(&ddata->data[i].timer);
>  		gpio_free(pdata->buttons[i].gpio);
>  	}
>  
> -	input_unregister_device(input);
> +	if (pdata->polling)
> +		input_unregister_polled_device(poll_dev);
> +	else
> +		input_unregister_device(poll_dev->input);
>  
>  	return 0;
>  }
> diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
> index ec6ecd7..e869752 100644
> --- a/include/linux/gpio_keys.h
> +++ b/include/linux/gpio_keys.h
> @@ -15,6 +15,7 @@ struct gpio_keys_button {
>  struct gpio_keys_platform_data {
>  	struct gpio_keys_button *buttons;
>  	int nbuttons;
> +	int polling;		/* force polling mode */
>  };
>  
>  #endif

WARNING: multiple messages have this Message-ID (diff)
From: Paul Mundt <lethal@linux-sh.org>
To: Dmitry Torokhov <dtor@mail.ru>,
	linux-input@vger.kernel.org, linux-sh@vger.kernel.org
Subject: Re: [PATCH] input: gpio_keys: Polling mode support.
Date: Tue, 28 Oct 2008 10:18:57 +0000	[thread overview]
Message-ID: <20081028101857.GA25523@linux-sh.org> (raw)
In-Reply-To: <20081021083816.GA29345@linux-sh.org>

Ping.

On Tue, Oct 21, 2008 at 05:38:16PM +0900, Paul Mundt wrote:
> This implements an optional polling mode for the gpio_keys driver,
> necessary for GPIOs that are not able to generate IRQs.
> 
> Polling mode is done device granular, and can not be toggled for
> individual GPIOs in order to maintain simplicity. Platforms with both
> IRQ capable and incapable GPIOs are required to register multiple
> times, once for each case.
> 
> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
> 
> ---
> 
>  drivers/input/keyboard/Kconfig     |    1 
>  drivers/input/keyboard/gpio_keys.c |   91 ++++++++++++++++++++++++++++---------
>  include/linux/gpio_keys.h          |    1 
>  3 files changed, 72 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index efd70a9..a8cefe9 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -283,6 +283,7 @@ config KEYBOARD_AAED2000
>  config KEYBOARD_GPIO
>  	tristate "GPIO Buttons"
>  	depends on GENERIC_GPIO
> +	select INPUT_POLLDEV
>  	help
>  	  This driver implements support for buttons connected
>  	  to GPIO pins of various CPUs (and some other chips).
> diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
> index 05f3f43..412a10d 100644
> --- a/drivers/input/keyboard/gpio_keys.c
> +++ b/drivers/input/keyboard/gpio_keys.c
> @@ -1,7 +1,8 @@
>  /*
> - * Driver for keys on GPIO lines capable of generating interrupts.
> + * Driver for keys on GPIO lines, either IRQ-driven or polled.
>   *
>   * Copyright 2005 Phil Blundell
> + * Copyright 2008 Paul Mundt
>   *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License version 2 as
> @@ -9,7 +10,6 @@
>   */
>  
>  #include <linux/module.h>
> -
>  #include <linux/init.h>
>  #include <linux/fs.h>
>  #include <linux/interrupt.h>
> @@ -22,7 +22,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/input.h>
>  #include <linux/gpio_keys.h>
> -
> +#include <linux/input-polldev.h>
>  #include <asm/gpio.h>
>  
>  struct gpio_button_data {
> @@ -32,7 +32,8 @@ struct gpio_button_data {
>  };
>  
>  struct gpio_keys_drvdata {
> -	struct input_dev *input;
> +	struct gpio_keys_platform_data *pdata;
> +	struct input_polled_dev *poll_dev;
>  	struct gpio_button_data data[0];
>  };
>  
> @@ -54,6 +55,33 @@ static void gpio_check_button(unsigned long _data)
>  	gpio_keys_report_event(data);
>  }
>  
> +static void gpio_handle_button_event(struct gpio_keys_button *button,
> +				     struct gpio_button_data *bdata)
> +{
> +	if (button->debounce_interval)
> +		mod_timer(&bdata->timer,
> +			jiffies + msecs_to_jiffies(button->debounce_interval));
> +	else
> +		gpio_keys_report_event(bdata);
> +}
> +
> +static void gpio_keys_poll(struct input_polled_dev *dev)
> +{
> +	struct gpio_keys_drvdata *ddata = dev->private;
> +	struct gpio_keys_platform_data *pdata = ddata->pdata;
> +	int i;
> +
> +	for (i = 0; i < pdata->nbuttons; i++) {
> +		struct gpio_keys_button *button = &pdata->buttons[i];
> +		struct gpio_button_data *bdata = &ddata->data[i];
> +
> +		bdata->input = dev->input;
> +		bdata->button = button;
> +
> +		gpio_handle_button_event(button, bdata);
> +	}
> +}
> +
>  static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
>  {
>  	struct gpio_button_data *bdata = dev_id;
> @@ -61,11 +89,7 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
>  
>  	BUG_ON(irq != gpio_to_irq(button->gpio));
>  
> -	if (button->debounce_interval)
> -		mod_timer(&bdata->timer,
> -			jiffies + msecs_to_jiffies(button->debounce_interval));
> -	else
> -		gpio_keys_report_event(bdata);
> +	gpio_handle_button_event(button, bdata);
>  
>  	return IRQ_HANDLED;
>  }
> @@ -74,6 +98,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  {
>  	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
>  	struct gpio_keys_drvdata *ddata;
> +	struct input_polled_dev *poll_dev;
>  	struct input_dev *input;
>  	int i, error;
>  	int wakeup = 0;
> @@ -81,14 +106,19 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  	ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
>  			pdata->nbuttons * sizeof(struct gpio_button_data),
>  			GFP_KERNEL);
> -	input = input_allocate_device();
> -	if (!ddata || !input) {
> +	poll_dev = input_allocate_polled_device();
> +	if (!ddata || !poll_dev) {
>  		error = -ENOMEM;
>  		goto fail1;
>  	}
>  
>  	platform_set_drvdata(pdev, ddata);
>  
> +	poll_dev->private = ddata;
> +	poll_dev->poll = gpio_keys_poll;
> +	poll_dev->poll_interval = 50; /* msec */
> +
> +	input = poll_dev->input;
>  	input->name = pdev->name;
>  	input->phys = "gpio-keys/input0";
>  	input->dev.parent = &pdev->dev;
> @@ -98,7 +128,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  	input->id.product = 0x0001;
>  	input->id.version = 0x0100;
>  
> -	ddata->input = input;
> +	ddata->poll_dev = poll_dev;
> +	ddata->pdata = pdata;
>  
>  	for (i = 0; i < pdata->nbuttons; i++) {
>  		struct gpio_keys_button *button = &pdata->buttons[i];
> @@ -127,6 +158,15 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  			goto fail2;
>  		}
>  
> +		input_set_capability(input, type, button->code);
> +
> +		/*
> +		 * Skip the IRQ setup and wakeup source initialization if
> +		 * we are going to be polled.
> +		 */
> +		if (pdata->polling)
> +			continue;
> +
>  		irq = gpio_to_irq(button->gpio);
>  		if (irq < 0) {
>  			error = irq;
> @@ -151,11 +191,12 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  
>  		if (button->wakeup)
>  			wakeup = 1;
> -
> -		input_set_capability(input, type, button->code);
>  	}
>  
> -	error = input_register_device(input);
> +	if (pdata->polling)
> +		error = input_register_polled_device(poll_dev);
> +	else
> +		error = input_register_device(input);
>  	if (error) {
>  		pr_err("gpio-keys: Unable to register input device, "
>  			"error: %d\n", error);
> @@ -168,7 +209,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  
>   fail2:
>  	while (--i >= 0) {
> -		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
> +		if (!pdata->polling)
> +			free_irq(gpio_to_irq(pdata->buttons[i].gpio),
> +				 &ddata->data[i]);
>  		if (pdata->buttons[i].debounce_interval)
>  			del_timer_sync(&ddata->data[i].timer);
>  		gpio_free(pdata->buttons[i].gpio);
> @@ -176,7 +219,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, NULL);
>   fail1:
> -	input_free_device(input);
> +	input_free_polled_device(poll_dev);
>  	kfree(ddata);
>  
>  	return error;
> @@ -186,20 +229,26 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
>  {
>  	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
>  	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
> -	struct input_dev *input = ddata->input;
> +	struct input_polled_dev *poll_dev = ddata->poll_dev;
>  	int i;
>  
>  	device_init_wakeup(&pdev->dev, 0);
>  
>  	for (i = 0; i < pdata->nbuttons; i++) {
> -		int irq = gpio_to_irq(pdata->buttons[i].gpio);
> -		free_irq(irq, &ddata->data[i]);
> +		if (!pdata->polling) {
> +			int irq = gpio_to_irq(pdata->buttons[i].gpio);
> +			free_irq(irq, &ddata->data[i]);
> +		}
> +
>  		if (pdata->buttons[i].debounce_interval)
>  			del_timer_sync(&ddata->data[i].timer);
>  		gpio_free(pdata->buttons[i].gpio);
>  	}
>  
> -	input_unregister_device(input);
> +	if (pdata->polling)
> +		input_unregister_polled_device(poll_dev);
> +	else
> +		input_unregister_device(poll_dev->input);
>  
>  	return 0;
>  }
> diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
> index ec6ecd7..e869752 100644
> --- a/include/linux/gpio_keys.h
> +++ b/include/linux/gpio_keys.h
> @@ -15,6 +15,7 @@ struct gpio_keys_button {
>  struct gpio_keys_platform_data {
>  	struct gpio_keys_button *buttons;
>  	int nbuttons;
> +	int polling;		/* force polling mode */
>  };
>  
>  #endif

  reply	other threads:[~2008-10-28 10:19 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-21  8:38 [PATCH] input: gpio_keys: Polling mode support Paul Mundt
2008-10-21  8:38 ` Paul Mundt
2008-10-28 10:18 ` Paul Mundt [this message]
2008-10-28 10:18   ` Paul Mundt
2008-10-29  3:51   ` Dmitry Torokhov
2008-10-29  3:51     ` Dmitry Torokhov
2008-11-25 20:43     ` Paul Mundt
2008-11-25 20:43       ` Paul Mundt
2008-12-08  3:32       ` Paul Mundt
2008-12-08  3:32         ` Paul Mundt
2008-12-24  1:47         ` Paul Mundt
2008-12-24  1:47           ` Paul Mundt
  -- strict thread matches above, loose matches on Subject: below --
2010-07-06 19:01 [PATCH] input: gpio_keys: polling " Alexander Clouter
2010-07-08 16:26 ` Alexander Clouter
2010-07-12 19:29 ` Alexander Clouter
2010-07-13  1:17   ` Paul Mundt
2010-07-13  1:28     ` Dmitry Torokhov
2010-07-13  7:26       ` Alexander Clouter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081028101857.GA25523@linux-sh.org \
    --to=lethal@linux-sh.org \
    --cc=dtor@mail.ru \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.