* [PATCH 1/4] rt2x00: Remove RATE_BASIC flag @ 2008-11-01 23:36 Ivo van Doorn 2008-11-01 23:37 ` [PATCH 2/4] rt2x00: Fix LED state handling Ivo van Doorn 0 siblings, 1 reply; 4+ messages in thread From: Ivo van Doorn @ 2008-11-01 23:36 UTC (permalink / raw) To: John W. Linville; +Cc: linux-wireless, rt2400-devel mac80211 is in charge of determining the basic rates, so we are not using the RATE_BASIC flag anymore. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> --- drivers/net/wireless/rt2x00/rt2x00dev.c | 14 +++++++------- drivers/net/wireless/rt2x00/rt2x00lib.h | 1 - 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 477a944..a8fee68 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -717,31 +717,31 @@ EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); */ const struct rt2x00_rate rt2x00_supported_rates[12] = { { - .flags = DEV_RATE_CCK | DEV_RATE_BASIC, + .flags = DEV_RATE_CCK, .bitrate = 10, .ratemask = BIT(0), .plcp = 0x00, }, { - .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC, + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, .bitrate = 20, .ratemask = BIT(1), .plcp = 0x01, }, { - .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC, + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, .bitrate = 55, .ratemask = BIT(2), .plcp = 0x02, }, { - .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC, + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, .bitrate = 110, .ratemask = BIT(3), .plcp = 0x03, }, { - .flags = DEV_RATE_OFDM | DEV_RATE_BASIC, + .flags = DEV_RATE_OFDM, .bitrate = 60, .ratemask = BIT(4), .plcp = 0x0b, @@ -753,7 +753,7 @@ const struct rt2x00_rate rt2x00_supported_rates[12] = { .plcp = 0x0f, }, { - .flags = DEV_RATE_OFDM | DEV_RATE_BASIC, + .flags = DEV_RATE_OFDM, .bitrate = 120, .ratemask = BIT(6), .plcp = 0x0a, @@ -765,7 +765,7 @@ const struct rt2x00_rate rt2x00_supported_rates[12] = { .plcp = 0x0e, }, { - .flags = DEV_RATE_OFDM | DEV_RATE_BASIC, + .flags = DEV_RATE_OFDM, .bitrate = 240, .ratemask = BIT(8), .plcp = 0x09, diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 9f214f8..c52ee21 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -43,7 +43,6 @@ struct rt2x00_rate { #define DEV_RATE_CCK 0x0001 #define DEV_RATE_OFDM 0x0002 #define DEV_RATE_SHORT_PREAMBLE 0x0004 -#define DEV_RATE_BASIC 0x0008 unsigned short bitrate; /* In 100kbit/s */ unsigned short ratemask; -- 1.5.6.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/4] rt2x00: Fix LED state handling 2008-11-01 23:36 [PATCH 1/4] rt2x00: Remove RATE_BASIC flag Ivo van Doorn @ 2008-11-01 23:37 ` Ivo van Doorn 2008-11-01 23:37 ` [PATCH 3/4] rt2x00: Block set_key() during suspend/shutdown Ivo van Doorn 0 siblings, 1 reply; 4+ messages in thread From: Ivo van Doorn @ 2008-11-01 23:37 UTC (permalink / raw) To: John W. Linville; +Cc: linux-wireless, rt2400-devel, Johannes Berg For every global LED state change (register/unregister, suspend/resume) we should force the LEDS to turn off. This makes sure that the LEDS will always be in a sane state after the state switch. Note that when unregister is called but the LED class wasn't resumed yet, we shouldn't change the LED state since we might not have access to the device (device was unplugged while suspended). Also remove the checks in the activity, assoc and radio LEDS which blocked calls to brightness_set() when the state hasn't changed. Some of those LEDS could be enabled by themselves when something happens in the hardware (e.g. firmware is loaded). We already did called rt2x00leds to switch the LED off, but those calls were blocked. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> --- drivers/net/wireless/rt2x00/rt2x00leds.c | 94 ++++++++++++++++++------------ 1 files changed, 56 insertions(+), 38 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c index b362a1c..66c61b1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.c +++ b/drivers/net/wireless/rt2x00/rt2x00leds.c @@ -72,49 +72,33 @@ void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi) } } -void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled) +static void rt2x00led_led_simple(struct rt2x00_led *led, bool enabled) { - struct rt2x00_led *led = &rt2x00dev->led_qual; - unsigned int brightness; + unsigned int brightness = enabled ? LED_FULL : LED_OFF; - if ((led->type != LED_TYPE_ACTIVITY) || !(led->flags & LED_REGISTERED)) + if (!(led->flags & LED_REGISTERED)) return; - brightness = enabled ? LED_FULL : LED_OFF; - if (brightness != led->led_dev.brightness) { - led->led_dev.brightness_set(&led->led_dev, brightness); - led->led_dev.brightness = brightness; - } + led->led_dev.brightness_set(&led->led_dev, brightness); + led->led_dev.brightness = brightness; } -void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled) +void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled) { - struct rt2x00_led *led = &rt2x00dev->led_assoc; - unsigned int brightness; - - if ((led->type != LED_TYPE_ASSOC) || !(led->flags & LED_REGISTERED)) - return; + if (rt2x00dev->led_qual.type == LED_TYPE_ACTIVITY) + rt2x00led_led_simple(&rt2x00dev->led_qual, enabled); +} - brightness = enabled ? LED_FULL : LED_OFF; - if (brightness != led->led_dev.brightness) { - led->led_dev.brightness_set(&led->led_dev, brightness); - led->led_dev.brightness = brightness; - } +void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled) +{ + if (rt2x00dev->led_assoc.type == LED_TYPE_ASSOC) + rt2x00led_led_simple(&rt2x00dev->led_assoc, enabled); } void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled) { - struct rt2x00_led *led = &rt2x00dev->led_radio; - unsigned int brightness; - - if ((led->type != LED_TYPE_RADIO) || !(led->flags & LED_REGISTERED)) - return; - - brightness = enabled ? LED_FULL : LED_OFF; - if (brightness != led->led_dev.brightness) { - led->led_dev.brightness_set(&led->led_dev, brightness); - led->led_dev.brightness = brightness; - } + if (rt2x00dev->led_radio.type == LED_TYPE_ASSOC) + rt2x00led_led_simple(&rt2x00dev->led_radio, enabled); } static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev, @@ -125,6 +109,13 @@ static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev, int retval; led->led_dev.name = name; + led->led_dev.brightness = LED_OFF; + + /* + * Ensure the LED is off, it might have been enabled + * by the hardware when the device was powered on. + */ + led->led_dev.brightness_set(&led->led_dev, LED_OFF); retval = led_classdev_register(device, &led->led_dev); if (retval) { @@ -199,7 +190,16 @@ exit_fail: static void rt2x00leds_unregister_led(struct rt2x00_led *led) { led_classdev_unregister(&led->led_dev); - led->led_dev.brightness_set(&led->led_dev, LED_OFF); + + /* + * This might look weird, but when we are unregistering while + * suspended the led is already off, and since we haven't + * fully resumed yet, access to the device might not be + * possible yet. + */ + if (!(led->led_dev.flags & LED_SUSPENDED)) + led->led_dev.brightness_set(&led->led_dev, LED_OFF); + led->flags &= ~LED_REGISTERED; } @@ -213,22 +213,40 @@ void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev) rt2x00leds_unregister_led(&rt2x00dev->led_radio); } +static inline void rt2x00leds_suspend_led(struct rt2x00_led *led) +{ + led_classdev_suspend(&led->led_dev); + + /* This shouldn't be needed, but just to be safe */ + led->led_dev.brightness_set(&led->led_dev, LED_OFF); + led->led_dev.brightness = LED_OFF; +} + void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev) { if (rt2x00dev->led_qual.flags & LED_REGISTERED) - led_classdev_suspend(&rt2x00dev->led_qual.led_dev); + rt2x00leds_suspend_led(&rt2x00dev->led_qual); if (rt2x00dev->led_assoc.flags & LED_REGISTERED) - led_classdev_suspend(&rt2x00dev->led_assoc.led_dev); + rt2x00leds_suspend_led(&rt2x00dev->led_assoc); if (rt2x00dev->led_radio.flags & LED_REGISTERED) - led_classdev_suspend(&rt2x00dev->led_radio.led_dev); + rt2x00leds_suspend_led(&rt2x00dev->led_radio); +} + +static inline void rt2x00leds_resume_led(struct rt2x00_led *led) +{ + led_classdev_resume(&led->led_dev); + + /* Device might have enabled the LEDS during resume */ + led->led_dev.brightness_set(&led->led_dev, LED_OFF); + led->led_dev.brightness = LED_OFF; } void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev) { if (rt2x00dev->led_radio.flags & LED_REGISTERED) - led_classdev_resume(&rt2x00dev->led_radio.led_dev); + rt2x00leds_resume_led(&rt2x00dev->led_radio); if (rt2x00dev->led_assoc.flags & LED_REGISTERED) - led_classdev_resume(&rt2x00dev->led_assoc.led_dev); + rt2x00leds_resume_led(&rt2x00dev->led_assoc); if (rt2x00dev->led_qual.flags & LED_REGISTERED) - led_classdev_resume(&rt2x00dev->led_qual.led_dev); + rt2x00leds_resume_led(&rt2x00dev->led_qual); } -- 1.5.6.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 3/4] rt2x00: Block set_key() during suspend/shutdown 2008-11-01 23:37 ` [PATCH 2/4] rt2x00: Fix LED state handling Ivo van Doorn @ 2008-11-01 23:37 ` Ivo van Doorn 2008-11-01 23:38 ` [PATCH 4/4] rt2x00: Fix BUG_ON() with antenna handling Ivo van Doorn 0 siblings, 1 reply; 4+ messages in thread From: Ivo van Doorn @ 2008-11-01 23:37 UTC (permalink / raw) To: John W. Linville; +Cc: linux-wireless, rt2400-devel, Johannes Berg mac80211 will call set_key() when the device is shutting down. When the device is unplugged the keys will be lost automatically due to the power loss. When the device is not plugged but the module is only unloaded the keys can remain in the device hardware, when the module is loaded the keys will be cleaned up during initialization. This should prevent the problem reported by Johannes Berg, where unplugging the device while suspended resulted in a NULL pointer error during set_key() which was caused because of the CSR base address being freed. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> --- drivers/net/wireless/rt2x00/rt2x00mac.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 8fc2315..188f891 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -486,7 +486,9 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, struct ieee80211_key_conf *key); struct rt2x00lib_crypto crypto; - if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return 0; + else if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) return -EOPNOTSUPP; else if (key->keylen > 32) return -ENOSPC; -- 1.5.6.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 4/4] rt2x00: Fix BUG_ON() with antenna handling 2008-11-01 23:37 ` [PATCH 3/4] rt2x00: Block set_key() during suspend/shutdown Ivo van Doorn @ 2008-11-01 23:38 ` Ivo van Doorn 0 siblings, 0 replies; 4+ messages in thread From: Ivo van Doorn @ 2008-11-01 23:38 UTC (permalink / raw) To: John W. Linville; +Cc: linux-wireless, rt2400-devel, Johannes Berg With the new configuration handling, and more specifically splitting the configuration of the antenna from the normal configuration steps allowed a BUG_ON() to be triggered in the driver because the SW_DIVERSITY was send to the driver. This fixes that by catching the value early in rt2x00config.c and replacing it with a sensible value. This also fixes a problem where the antenna is not being initialized at all when the radio is enabled. Since it no longer is part of the mac80211 configuration the only place where rt2x00 configured it was the SW diversity handler. Obviously this is broken for all non-diversity hardware and breaks SW diversity due to a broken initialization. When the radio is enabled the antenna will be configured once as soon as the config() callback function is called. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> --- drivers/net/wireless/rt2x00/rt2x00.h | 3 +- drivers/net/wireless/rt2x00/rt2x00config.c | 35 ++++++++++++++++++++------- drivers/net/wireless/rt2x00/rt2x00dev.c | 22 +++++++++-------- drivers/net/wireless/rt2x00/rt2x00lib.h | 2 +- drivers/net/wireless/rt2x00/rt2x00mac.c | 13 ++++++++- 5 files changed, 51 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index f85eedb..8fa971c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -723,8 +723,7 @@ struct rt2x00_dev { /* * This is the default TX/RX antenna setup as indicated - * by the device's EEPROM. When mac80211 sets its - * antenna value to 0 we should be using these values. + * by the device's EEPROM. */ struct antenna_setup default_ant; diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 3e4eee3..1059b4d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -109,15 +109,32 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, } void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, - enum antenna rx, enum antenna tx) + struct antenna_setup *ant) { - struct antenna_setup ant; - - ant.rx = rx; - ant.tx = tx; + /* + * Failsafe: Make sure we are not sending the + * ANTENNA_SW_DIVERSITY state to the driver. + * If that happes fallback to hardware default, + * or our own default. + */ + if (ant->rx == ANTENNA_SW_DIVERSITY) { + if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) + ant->rx = ANTENNA_B; + else + ant->rx = rt2x00dev->default_ant.rx; + } + if (ant->tx == ANTENNA_SW_DIVERSITY) { + if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) + ant->tx = ANTENNA_B; + else + ant->tx = rt2x00dev->default_ant.tx; + } - if (rx == rt2x00dev->link.ant.active.rx && - tx == rt2x00dev->link.ant.active.tx) + /* + * Only reconfigure when something has changed. + */ + if (ant->rx == rt2x00dev->link.ant.active.rx && + ant->tx == rt2x00dev->link.ant.active.tx) return; /* @@ -132,12 +149,12 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, * The latter is required since we need to recalibrate the * noise-sensitivity ratio for the new setup. */ - rt2x00dev->ops->lib->config_ant(rt2x00dev, &ant); + rt2x00dev->ops->lib->config_ant(rt2x00dev, ant); rt2x00lib_reset_link_tuner(rt2x00dev); rt2x00_reset_link_ant_rssi(&rt2x00dev->link); - memcpy(&rt2x00dev->link.ant.active, &ant, sizeof(ant)); + memcpy(&rt2x00dev->link.ant.active, ant, sizeof(*ant)); if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index a8fee68..e8ca1cb 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -176,13 +176,14 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state) static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev) { - enum antenna rx = rt2x00dev->link.ant.active.rx; - enum antenna tx = rt2x00dev->link.ant.active.tx; + struct antenna_setup ant; int sample_a = rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_A); int sample_b = rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_B); + memcpy(&ant, &rt2x00dev->link.ant.active, sizeof(ant)); + /* * We are done sampling. Now we should evaluate the results. */ @@ -200,21 +201,22 @@ static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev) return; if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) - rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; + ant.rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) - tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; + ant.tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; - rt2x00lib_config_antenna(rt2x00dev, rx, tx); + rt2x00lib_config_antenna(rt2x00dev, &ant); } static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev) { - enum antenna rx = rt2x00dev->link.ant.active.rx; - enum antenna tx = rt2x00dev->link.ant.active.tx; + struct antenna_setup ant; int rssi_curr = rt2x00_get_link_ant_rssi(&rt2x00dev->link); int rssi_old = rt2x00_update_ant_rssi(&rt2x00dev->link, rssi_curr); + memcpy(&ant, &rt2x00dev->link.ant.active, sizeof(ant)); + /* * Legacy driver indicates that we should swap antenna's * when the difference in RSSI is greater that 5. This @@ -230,12 +232,12 @@ static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE; if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) - rx = (rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; + ant.rx = (ant.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) - tx = (tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; + ant.tx = (ant.tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; - rt2x00lib_config_antenna(rt2x00dev, rx, tx); + rt2x00lib_config_antenna(rt2x00dev, &ant); } static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index c52ee21..0c3a355 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -93,7 +93,7 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, struct ieee80211_bss_conf *conf); void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, - enum antenna rx, enum antenna tx); + struct antenna_setup *ant); void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, const unsigned int changed_flags); diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 188f891..48636b0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -339,7 +339,6 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed) { struct rt2x00_dev *rt2x00dev = hw->priv; struct ieee80211_conf *conf = &hw->conf; - int radio_on; int status; /* @@ -356,7 +355,6 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed) * some configuration parameters (e.g. channel and antenna values) can * only be set when the radio is enabled. */ - radio_on = test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags); if (conf->radio_enabled) { /* For programming the values, we have to turn RX off */ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); @@ -372,6 +370,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed) */ rt2x00lib_config(rt2x00dev, conf, changed); + /* + * The radio was enabled, configure the antenna to the + * default settings, the link tuner will later start + * continue configuring the antenna based on the software + * diversity. But for non-diversity configurations, we need + * to have configured the correct state now. + */ + if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) + rt2x00lib_config_antenna(rt2x00dev, + &rt2x00dev->default_ant); + /* Turn RX back on */ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); } else { -- 1.5.6.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-11-01 23:38 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-11-01 23:36 [PATCH 1/4] rt2x00: Remove RATE_BASIC flag Ivo van Doorn 2008-11-01 23:37 ` [PATCH 2/4] rt2x00: Fix LED state handling Ivo van Doorn 2008-11-01 23:37 ` [PATCH 3/4] rt2x00: Block set_key() during suspend/shutdown Ivo van Doorn 2008-11-01 23:38 ` [PATCH 4/4] rt2x00: Fix BUG_ON() with antenna handling Ivo van Doorn
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.