Re: [beagleboard] can't boot Linux-2.6.28-rc2-omap1

Re: [beagleboard] can't boot Linux-2.6.28-rc2-omap1

[Rick Bronson]

  See previous post with subject:

  Re: What happened to the serial console on BeagleBoard with 2.6.28-rc2?

  Rick

Re: [beagleboard] can't boot Linux-2.6.28-rc2-omap1

[Ming Lei]

2008/11/2 Rick Bronson <rick@efn.org>:
>
>  See previous post with subject:
>
>  Re: What happened to the serial console on BeagleBoard with 2.6.28-rc2?

Very Good!  My BB really does work after applying the patch.
Thanks!

>
>  Rick
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Lei Ming

Re: [beagleboard] can't boot Linux-2.6.28-rc2-omap1

[Tony Lindgren]

* Ming Lei <tom.leiming@gmail.com> [081102 02:02]:
> 2008/11/2 Rick Bronson <rick@efn.org>:
> >
> >  See previous post with subject:
> >
> >  Re: What happened to the serial console on BeagleBoard with 2.6.28-rc2?
> 
> Very Good!  My BB really does work after applying the patch.
> Thanks!

Can you please test my patch too after reverting Rick's strongly
ordered patch?

Thanks,

Tony

> 
> >
> >  Rick
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> 
> 
> 
> -- 
> Lei Ming
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [beagleboard] can't boot Linux-2.6.28-rc2-omap1

[Ming Lei]

OK.
I am now in work, and I will test your patch at home  about 10hours later,:-)
Thanks!

2008/11/3 Tony Lindgren <tony@atomide.com>:
> * Ming Lei <tom.leiming@gmail.com> [081102 02:02]:
>> 2008/11/2 Rick Bronson <rick@efn.org>:
>> >
>> >  See previous post with subject:
>> >
>> >  Re: What happened to the serial console on BeagleBoard with 2.6.28-rc2?
>>
>> Very Good!  My BB really does work after applying the patch.
>> Thanks!
>
> Can you please test my patch too after reverting Rick's strongly
> ordered patch?
>
> Thanks,
>
> Tony
>
>>
>> >
>> >  Rick
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> > the body of a message to majordomo@vger.kernel.org
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> >
>>
>>
>>
>> --
>> Lei Ming
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Lei Ming

can't boot Linux-2.6.28-rc2-omap1

[Ming Lei]

Hi All,

I am working on testing Linux-2.6.28-rc2 omap kernel on beagle board, and uImage
is compiled from linux-omp git tree in the following way:

     export  CROSS_COMPILE=arm-none-linux-gnueabi-
     make distclean
     make  omap3_beagle_defconfig
     make uImage

Then the boot messages :

-------------------------------------------------------------
    OMAP3 beagleboard.org # mmcinit;fatload mmc 0 0x80300000 ui3
reading ui3

1723104 bytes read
OMAP3 beagleboard.org # bootm 0x80300000
## Booting kernel from Legacy Image at 80300000 ...
   Image Name:   Linux-2.6.28-rc2-omap1-05147-g82
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1723040 Bytes =  1.6 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux...................................................................................
............................ done, booting the kernel.
--------------------------------------------------------------
and it stucks at here.

Thanks for your Helps.



-- 
Lei Ming

Re: [beagleboard] can't boot Linux-2.6.28-rc2-omap1

[Felipe Contreras]

On Sun, Nov 2, 2008 at 4:47 AM, Ming Lei <tom.leiming@gmail.com> wrote:
>
> Hi All,
>
> I am working on testing Linux-2.6.28-rc2 omap kernel on beagle board, and uImage
> is compiled from linux-omp git tree in the following way:
>
>     export  CROSS_COMPILE=arm-none-linux-gnueabi-
>     make distclean
>     make  omap3_beagle_defconfig
>     make uImage
>
> Then the boot messages :
>
> -------------------------------------------------------------
>    OMAP3 beagleboard.org # mmcinit;fatload mmc 0 0x80300000 ui3
> reading ui3
>
> 1723104 bytes read
> OMAP3 beagleboard.org # bootm 0x80300000
> ## Booting kernel from Legacy Image at 80300000 ...
>   Image Name:   Linux-2.6.28-rc2-omap1-05147-g82
>   Image Type:   ARM Linux Kernel Image (uncompressed)
>   Data Size:    1723040 Bytes =  1.6 MB
>   Load Address: 80008000
>   Entry Point:  80008000
>   Verifying Checksum ... OK
>   Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Uncompressing Linux...................................................................................
> ............................ done, booting the kernel.
> --------------------------------------------------------------
> and it stucks at here.

I'm getting the same =/

-- 
Felipe Contreras