[Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260

All of lore.kernel.org
 help / color / mirror / Atom feed

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
@ 2008-11-03 12:48 ` bugme-daemon
  2008-11-03 12:52 ` bugme-daemon
                   ` (22 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-03 12:48 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943


bzolnier@gmail.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
         AssignedTo|bzolnier@gmail.com          |io_ide@kernel-bugs.osdl.org
             Status|ASSIGNED                    |NEW




-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
  2008-11-03 12:48 ` [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260 bugme-daemon
@ 2008-11-03 12:52 ` bugme-daemon
  2008-11-03 18:03 ` bugme-daemon
                   ` (21 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-03 12:52 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #2 from bzolnier@gmail.com  2008-11-03 04:52 -------
Could you try some newer kernel like 2.6.27 or 2.6.28-rc3?

Also did it work OK with some earlier kernel?

[ From the bugreport it seems that kernel from Live CD works OK? ]

Thanks.


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
  2008-11-03 12:48 ` [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260 bugme-daemon
  2008-11-03 12:52 ` bugme-daemon
@ 2008-11-03 18:03 ` bugme-daemon
  2008-11-03 18:16 ` bugme-daemon
                   ` (20 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-03 18:03 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #3 from eshaffer1@mac.com  2008-11-03 10:03 -------
I am happy to  attempt a newer kernel if I can. While technically minded, I am
fairly new to Linux and can only load from Live CD or alt CD. Research to date
hasn't shown updating kernel from CD as possible...?

Hardy (2.6.24-19) failed at the same point in the boot process as Intrepid. No
other kernel attempted to date. 

The Hardy Live CD worked flawlessly, even wireless connection, which is why I
installed. I presumed if the Live CD worked it meant an install would also. 


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (2 preceding siblings ...)
  2008-11-03 18:03 ` bugme-daemon
@ 2008-11-03 18:16 ` bugme-daemon
  2008-11-06 23:50 ` bugme-daemon
                   ` (19 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-03 18:16 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #4 from eshaffer1@mac.com  2008-11-03 10:16 -------
I have also tried startx from terminal at root (hde3) on rescue cd, Ibex loads
but keyboard and mouse are unresponsive.


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (3 preceding siblings ...)
  2008-11-03 18:16 ` bugme-daemon
@ 2008-11-06 23:50 ` bugme-daemon
  2008-11-08  3:13 ` bugme-daemon
                   ` (18 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-06 23:50 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943

------- Comment #5 from eshaffer1@mac.com  2008-11-06 15:50 -------
(In reply to comment #2)
> Could you try some newer kernel like 2.6.27 or 2.6.28-rc3?
> 
> Also did it work OK with some earlier kernel?
> 
> [ From the bugreport it seems that kernel from Live CD works OK? ]
> 
> Thanks.
> 

I am happy to  attempt a newer kernel if I can. While technically minded, I am
fairly new to Linux and can only load from Live CD or alt CD. Research to date
hasn't shown updating kernel from CD as possible...?

Hardy (2.6.24-19) failed at the same point in the boot process as Intrepid. No
other kernel attempted to date. 

The Hardy Live CD worked flawlessly, even wireless connection, which is why I
installed. I presumed if the Live CD worked it meant an install would also.

I have also tried startx from terminal at root (hde3) on rescue cd, Ibex loads
but keyboard and mouse are unresponsive.

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (4 preceding siblings ...)
  2008-11-06 23:50 ` bugme-daemon
@ 2008-11-08  3:13 ` bugme-daemon
  2008-11-08  3:13 ` bugme-daemon
                   ` (17 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-08  3:13 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #6 from eshaffer1@mac.com  2008-11-07 19:13 -------
(In reply to comment #5)
> (In reply to comment #2)
> > Could you try some newer kernel like 2.6.27 or 2.6.28-rc3?
> > 
> > Also did it work OK with some earlier kernel?
> > 
> > [ From the bugreport it seems that kernel from Live CD works OK? ]
> > 
> > Thanks.
> > 
> 
> I am happy to  attempt a newer kernel if I can. While technically minded, I am
> fairly new to Linux and can only load from Live CD or alt CD. Research to date
> hasn't shown updating kernel from CD as possible...?
> 
> Hardy (2.6.24-19) failed at the same point in the boot process as Intrepid. No
> other kernel attempted to date. 
> 
> The Hardy Live CD worked flawlessly, even wireless connection, which is why I
> installed. I presumed if the Live CD worked it meant an install would also.
> 
> I have also tried startx from terminal at root (hde3) on rescue cd, Ibex loads
> but keyboard and mouse are unresponsive.
> 

I have applied a firmware update to the AEC 6260M and the system will now
recognize the partitions, cylinder, block data etc. Unfortunately the boot
process still hangs at SCSI 0: with lost interrupts / DMA recovery messages. 


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (5 preceding siblings ...)
  2008-11-08  3:13 ` bugme-daemon
@ 2008-11-08  3:13 ` bugme-daemon
  2008-11-09 16:07 ` bugme-daemon
                   ` (16 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-08  3:13 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #7 from eshaffer1@mac.com  2008-11-07 19:13 -------
I must use the irqpoll option for the partition check to be successful. 


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (6 preceding siblings ...)
  2008-11-08  3:13 ` bugme-daemon
@ 2008-11-09 16:07 ` bugme-daemon
  2008-11-09 16:08 ` bugme-daemon
                   ` (15 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 16:07 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943


bzolnier@gmail.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |bcollins@ubuntu.com




------- Comment #8 from bzolnier@gmail.com  2008-11-09 08:07 -------
It could be that AEC6260[R] controllers may need the same quirks (i.e.
explicitly enabling IRQ line output) as AEC6280[R] ones on Macintosh (draft
patch for 2.6.28-rc3 attached to the next comment).

When it comes to questions related to upating kernel in Ubuntu I think that it
would be the best to try to get some help from Ubuntu Kernel Team  (added Ben
to cc:) as I can't help much here.


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (7 preceding siblings ...)
  2008-11-09 16:07 ` bugme-daemon
@ 2008-11-09 16:08 ` bugme-daemon
  2008-11-09 16:58 ` bugme-daemon
                   ` (14 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 16:08 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #9 from bzolnier@gmail.com  2008-11-09 08:08 -------
Created an attachment (id=18749)
 --> (http://bugzilla.kernel.org/attachment.cgi?id=18749&action=view)
aec62xx: fix AEC6260[R] support on Macintosh


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (8 preceding siblings ...)
  2008-11-09 16:08 ` bugme-daemon
@ 2008-11-09 16:58 ` bugme-daemon
  2008-11-09 19:47 ` bugme-daemon
                   ` (13 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 16:58 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943


alan@lxorguk.ukuu.org.uk changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |alan@lxorguk.ukuu.org.uk




------- Comment #10 from alan@lxorguk.ukuu.org.uk  2008-11-09 08:58 -------
If the BIOS isn't getting run then that patch seems plausible IFF the registers
are the same between the chips. I don't have enough Artop docs here to tell.

Probably worth getting an lspci -vvxxx from it (off a live cd or similar) to
see what it look slike.


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (9 preceding siblings ...)
  2008-11-09 16:58 ` bugme-daemon
@ 2008-11-09 19:47 ` bugme-daemon
  2008-11-09 19:59 ` bugme-daemon
                   ` (12 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 19:47 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #11 from eshaffer1@mac.com  2008-11-09 11:47 -------
ubuntu@ubuntu:~$ lspci -vvxxx
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ >SERR- <PERR+
        Latency: 0, Cache Line Size: 32 bytes
00: 57 10 02 00 06 00 80 b0 40 00 00 06 08 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02)
(prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: 80800000-808fffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: <access denied>
00: 11 10 26 00 07 01 b0 02 02 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 11 11 a0 a2
20: 80 80 80 80 81 80 71 80 00 00 00 00 00 00 00 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 06 03

00:10.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD [Radeon
7200] (prog-if 00 [VGA controller])
        Subsystem: ATI Technologies Inc Unknown device 0908
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 16 (2000ns min), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at 88000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 2000 [size=256]
        Region 2: Memory at 80980000 (32-bit, non-prefetchable) [size=512K]
        Expansion ROM at 80000000 [disabled] [size=128K]
        Capabilities: <access denied>
00: 02 10 44 51 87 00 b0 02 00 00 00 03 08 10 00 00
10: 08 00 00 88 01 04 00 00 00 00 98 80 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 09
30: 00 00 00 80 50 00 00 00 00 00 00 00 ff 01 08 00

01:00.0 FireWire (IEEE 1394): Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link
Layer Controller (rev 02) (prog-if 00 [Generic])
        Subsystem: Apple Computer Inc. Unknown device 001c
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 16 (750ns min, 1000ns max), Cache Line Size: 128 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at 80881000 (32-bit, non-prefetchable) [size=4K]
        Region 1: Memory at 808c0000 (32-bit, non-prefetchable) [size=64K]
        Region 2: Memory at 808b0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at 808a0000 [disabled] [size=64K]
00: 4c 10 00 80 16 00 00 02 02 00 00 0c 20 10 00 00
10: 00 10 88 80 00 00 8c 80 00 00 8b 80 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 1c 00
30: 00 00 8a 80 00 00 00 00 00 00 00 00 00 01 03 04

01:01.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 05) (prog-if 8f [Master
SecP SecO PriP PriO])
        Subsystem: Silicon Image, Inc. PCI0646
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 26
        Region 0: I/O ports at 10e0 [size=8]
        Region 1: I/O ports at 10d0 [size=4]
        Region 2: I/O ports at 10c0 [size=8]
        Region 3: I/O ports at 10b0 [size=4]
        Region 4: I/O ports at 10a0 [size=16]
        Capabilities: <access denied>
00: 95 10 46 06 05 00 90 02 05 8f 01 01 00 40 00 00
10: e1 10 00 00 d1 10 00 00 c1 10 00 00 b1 10 00 00
20: a1 10 00 00 00 00 00 00 00 00 00 00 95 10 46 06
30: 00 00 00 00 60 00 00 00 00 00 00 00 0e 01 02 04

01:04.0 SCSI storage controller: Artop Electronic Corp ATP860 (rev 01)
        Subsystem: Artop Electronic Corp ATP860
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 16 (1500ns min, 1500ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 25
        Region 0: I/O ports at 1090 [size=8]
        Region 1: I/O ports at 1080 [size=4]
        Region 2: I/O ports at 1070 [size=8]
        Region 3: I/O ports at 1060 [size=4]
        Region 4: I/O ports at 1050 [size=16]
        Expansion ROM at 80890000 [disabled] [size=64K]
        Capabilities: <access denied>
00: 91 11 07 00 15 00 90 02 01 00 00 01 08 10 00 00
10: 91 10 00 00 81 10 00 00 71 10 00 00 61 10 00 00
20: 51 10 00 00 00 00 00 00 00 00 00 00 91 11 07 00
30: 00 00 89 80 58 00 00 00 00 00 00 00 00 01 06 06

01:05.0 Class ff00: Apple Computer Inc. Paddington Mac I/O
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
        Latency: 16, Cache Line Size: 32 bytes
        Region 0: Memory at 80800000 (32-bit, non-prefetchable) [size=512K]
00: 6b 10 17 00 16 00 00 82 00 00 00 ff 08 10 00 00
10: 00 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:06.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
        Subsystem: OPTi Inc. 82C861
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
        Latency: 16, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at 80880000 (32-bit, non-prefetchable) [size=4K]
00: 45 10 61 c8 16 00 80 82 10 10 03 0c 08 10 00 00
10: 00 00 88 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 45 10 61 c8
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (10 preceding siblings ...)
  2008-11-09 19:47 ` bugme-daemon
@ 2008-11-09 19:59 ` bugme-daemon
  2008-11-09 21:15 ` bugme-daemon
                   ` (11 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 19:59 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #12 from alan@lxorguk.ukuu.org.uk  2008-11-09 11:59 -------
Can you redo that as the root user - only root can access registers > 0x3F
which is what we need to see in this case.

Alan


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (11 preceding siblings ...)
  2008-11-09 19:59 ` bugme-daemon
@ 2008-11-09 21:15 ` bugme-daemon
  2008-11-09 21:50 ` bugme-daemon
                   ` (10 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 21:15 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #13 from eshaffer1@mac.com  2008-11-09 13:15 -------
ubuntu@ubuntu:~$ sudo lspci -vvxxx
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ >SERR- <PERR+
        Latency: 0, Cache Line Size: 32 bytes
00: 57 10 02 00 06 00 80 b0 40 00 00 06 08 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 01 00 00 00 00 00 00 00 00 00 00 20 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 11 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 80 00 80 00 80 00 80 00 00 01 01 02 02 03 03
90: 7f ff 7f ff 7f ff 7f ff 00 00 01 01 02 02 03 03
a0: ff 00 00 96 00 00 00 00 1c 06 14 ff 00 02 00 22
b0: 00 00 00 00 00 00 00 00 00 00 06 00 00 00 00 00
c0: 01 00 00 72 00 00 00 00 80 80 00 2c 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 42 00 ff 0f 00 00 00 00 20 00 00 00 00 00 00 00
f0: 00 00 6c f9 00 12 01 00 93 22 30 14 24 22 30 25

00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02)
(prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: 80800000-808fffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
00: 11 10 26 00 07 01 b0 02 02 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 11 11 a0 a2
20: 80 80 80 80 81 80 71 80 00 00 00 00 00 00 00 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 06 03
40: 00 00 ff 02 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 02 00 0f 00 00 18 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 01
e0: 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:10.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD [Radeon
7200] (prog-if 00 [VGA controller])
        Subsystem: ATI Technologies Inc Unknown device 0908
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 16 (2000ns min), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at 88000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 2000 [size=256]
        Region 2: Memory at 80980000 (32-bit, non-prefetchable) [size=512K]
        Expansion ROM at 80000000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 02 10 44 51 87 00 b0 02 00 00 00 03 08 10 00 00
10: 08 00 00 88 01 04 00 00 00 00 98 80 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 09
30: 00 00 00 80 50 00 00 00 00 00 00 00 ff 01 08 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 09
50: 01 00 02 06 00 00 00 00 02 50 20 00 00 02 00 2f
60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 FireWire (IEEE 1394): Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link
Layer Controller (rev 02) (prog-if 00 [Generic])
        Subsystem: Apple Computer Inc. Unknown device 001c
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 16 (750ns min, 1000ns max), Cache Line Size: 128 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at 80881000 (32-bit, non-prefetchable) [size=4K]
        Region 1: Memory at 808c0000 (32-bit, non-prefetchable) [size=64K]
        Region 2: Memory at 808b0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at 808a0000 [disabled] [size=64K]
00: 4c 10 00 80 16 00 00 02 02 00 00 0c 20 10 00 00
10: 00 10 88 80 00 00 8c 80 00 00 8b 80 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 1c 00
30: 00 00 8a 80 00 00 00 00 00 00 00 00 00 01 03 04
40: 00 00 00 00 71 00 00 00 00 00 00 00 ff 03 01 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 0d 00 00 00 0d 00 00 00 0d 00 00 00 0d 00 00 00
d0: 0d 00 00 00 0d 00 00 00 0d 00 00 00 0d 00 00 00
e0: 0d 00 00 00 0d 00 00 00 0d 00 00 00 0d 00 00 00
f0: 0d 00 00 00 0d 00 00 00 0d 00 00 00 0d 00 00 00

01:01.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 05) (prog-if 8f [Master
SecP SecO PriP PriO])
        Subsystem: Silicon Image, Inc. PCI0646
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 26
        Region 0: I/O ports at 10e0 [size=8]
        Region 1: I/O ports at 10d0 [size=4]
        Region 2: I/O ports at 10c0 [size=8]
        Region 3: I/O ports at 10b0 [size=4]
        Region 4: I/O ports at 10a0 [size=16]
        Capabilities: [60] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=3 PME-
00: 95 10 46 06 05 00 90 02 05 8f 01 01 00 40 00 00
10: e1 10 00 00 d1 10 00 00 c1 10 00 00 b1 10 00 00
20: a1 10 00 00 00 00 00 00 00 00 00 00 95 10 46 06
30: 00 00 00 00 60 00 00 00 00 00 00 00 0e 01 02 04
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02
50: 40 e4 00 c0 00 c0 00 cc 00 40 00 00 00 00 00 00
60: 01 00 01 06 00 60 00 80 00 00 00 00 00 00 00 00
70: 08 00 00 f0 e8 12 e7 0f 08 00 00 f0 c8 1f ff 6f
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:04.0 SCSI storage controller: Artop Electronic Corp ATP860 (rev 01)
        Subsystem: Artop Electronic Corp ATP860
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 16 (1500ns min, 1500ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 25
        Region 0: I/O ports at 1090 [size=8]
        Region 1: I/O ports at 1080 [size=4]
        Region 2: I/O ports at 1070 [size=8]
        Region 3: I/O ports at 1060 [size=4]
        Region 4: I/O ports at 1050 [size=16]
        Expansion ROM at 80890000 [disabled] [size=64K]
        Capabilities: [58] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 91 11 07 00 15 00 90 02 01 00 00 01 08 10 00 00
10: 91 10 00 00 81 10 00 00 71 10 00 00 61 10 00 00
20: 51 10 00 00 00 00 00 00 00 00 00 00 91 11 07 00
30: 00 00 89 80 58 00 00 00 00 00 00 00 00 01 06 06
40: 31 31 00 31 55 50 00 00 70 00 06 00 00 02 00 00
50: ff ff ff ff 00 02 00 00 01 00 01 00 00 00 00 00
60: 31 31 00 31 55 50 00 00 70 00 06 00 00 02 00 00
70: 00 00 00 00 00 02 00 00 01 00 01 00 00 00 00 00
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: 31 31 00 31 55 50 00 00 70 00 06 00 00 02 00 00
d0: 00 00 00 00 00 02 00 00 01 00 01 00 00 00 00 00
e0: 31 31 00 31 55 50 00 00 70 00 06 00 00 02 00 00
f0: 00 00 00 00 00 02 00 00 01 00 01 00 00 00 00 00

01:05.0 Class ff00: Apple Computer Inc. Paddington Mac I/O
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
        Latency: 16, Cache Line Size: 32 bytes
        Region 0: Memory at 80800000 (32-bit, non-prefetchable) [size=512K]
00: 6b 10 17 00 16 00 00 82 00 00 00 ff 08 10 00 00
10: 00 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:06.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
        Subsystem: OPTi Inc. 82C861
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
        Latency: 16, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at 80880000 (32-bit, non-prefetchable) [size=4K]
00: 45 10 61 c8 16 00 80 82 10 10 03 0c 08 10 00 00
10: 00 00 88 80 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 45 10 61 c8
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
40: 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 01 27 00 30 33 33 33 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (12 preceding siblings ...)
  2008-11-09 21:15 ` bugme-daemon
@ 2008-11-09 21:50 ` bugme-daemon
  2008-11-09 22:05 ` bugme-daemon
                   ` (9 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 21:50 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #14 from bzolnier@gmail.com  2008-11-09 13:50 -------
Thanks.  Could you try booting your installed system with "hde=nodma" kernel
option, and if that works do (as root):

setpci -s 01:04.0 4a.b=86
hdparm -d1 /dev/hde

and see if hde continues to work fine (now with DMA mode enabled)?


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (13 preceding siblings ...)
  2008-11-09 21:50 ` bugme-daemon
@ 2008-11-09 22:05 ` bugme-daemon
  2008-11-09 22:26 ` bugme-daemon
                   ` (8 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 22:05 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #15 from bzolnier@gmail.com  2008-11-09 14:05 -------
Update: hdparm -d1 /dev/hda won't work since we removed CONFIG_IDEDMA_PCI_AUTO
config option before 2.6.24 but it still would be to useful to boot with
"hde=nodma" and no "irqpoll".


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (14 preceding siblings ...)
  2008-11-09 22:05 ` bugme-daemon
@ 2008-11-09 22:26 ` bugme-daemon
  2008-11-09 22:40 ` bugme-daemon
                   ` (7 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 22:26 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #16 from eshaffer1@mac.com  2008-11-09 14:26 -------
hde=nodma - unsuccessful
hde=nodma hdf=nodma hdh=nodma - unsuccessful

Still experiencing boot stall at scsi0 : MESH


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (15 preceding siblings ...)
  2008-11-09 22:26 ` bugme-daemon
@ 2008-11-09 22:40 ` bugme-daemon
  2008-11-09 23:00 ` bugme-daemon
                   ` (6 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 22:40 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #17 from eshaffer1@mac.com  2008-11-09 14:40 -------
(In reply to comment #9)
> Created an attachment (id=18749)
 --> (http://bugzilla.kernel.org/attachment.cgi?id=18749&action=view) [details]
> aec62xx: fix AEC6260[R] support on Macintosh
> 

Sorry but have to ask, is there something I am meant to do with this patch or
is this internal communication? 


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (16 preceding siblings ...)
  2008-11-09 22:40 ` bugme-daemon
@ 2008-11-09 23:00 ` bugme-daemon
  2008-11-09 23:20 ` bugme-daemon
                   ` (5 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 23:00 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #18 from bzolnier@gmail.com  2008-11-09 15:00 -------
Do SCSI and IDE devices share IRQs?  Could you post the output of 'cat
/proc/interrupts' from the "irqpoll" kernel?

PS I don't think that there is a need to do anything with the patch currently.


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (17 preceding siblings ...)
  2008-11-09 23:00 ` bugme-daemon
@ 2008-11-09 23:20 ` bugme-daemon
  2008-11-09 23:45 ` bugme-daemon
                   ` (4 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 23:20 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #19 from eshaffer1@mac.com  2008-11-09 15:20 -------
Unfortunately I am uncertain how to get that output from the "irqpoll" kernel.
I tried $cat /proc/interrupts and got this output (from Live CD no?) :

ubuntu@ubuntu:~$ cat /proc/interrupts
           CPU0       
 16:         14   PMAC-PIC  Edge      MESH
 18:          1   PMAC-PIC  Edge      PMac
 19:        105   PMAC-PIC  Edge      PMac Output
 20:         95   PMAC-PIC  Edge      PMac Input
 21:          5   PMAC-PIC  Level     pcilynx
 22:          0   PMAC-PIC  Level     radeon@pci:0000:00:10.0
 25:      19152   PMAC-PIC  Level     ide2, ide3
 27:       6992   PMAC-PIC  Edge      ADB
 28:    1183341   PMAC-PIC  Level     ohci_hcd:usb1
 29:       7866   PMAC-PIC  Edge      ide0
 32:         71   PMAC-PIC  Edge      BMAC-txdma
 33:          2   PMAC-PIC  Edge      BMAC-rxdma
 42:         71   PMAC-PIC  Edge      BMAC-misc
BAD:          0

I also tried (beyond hope! :)) $cat /media/disk/proc/interrupts but receive an
error message of cat: /media/disk/proc/interrupts: no such file or directory.
Is it possible that since the "irqpoll" kernel has never completed booting this
file has not yet been written? 

Someday I will know more than just enough to be a danger to my system...until
then, I need a little more guidance on this one please. 


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (18 preceding siblings ...)
  2008-11-09 23:20 ` bugme-daemon
@ 2008-11-09 23:45 ` bugme-daemon
  2008-11-09 23:52 ` bugme-daemon
                   ` (3 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 23:45 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #20 from bzolnier@gmail.com  2008-11-09 15:45 -------
Ah, now I understand -- "irqpoll" only helps in getting past IDE messages but
boot still hangs on mesh driver initialization, right? [ I thought that you can
now boot successfully the installed system using "irqpoll". ]

If so this really looks more like a generic platform problem affecting both IDE
and SCSI (mesh driver has an "interesting" IRQ handling routine that will loop
forever if IRQ is not cleared).


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (19 preceding siblings ...)
  2008-11-09 23:45 ` bugme-daemon
@ 2008-11-09 23:52 ` bugme-daemon
  2008-11-10  0:10 ` bugme-daemon
                   ` (2 subsequent siblings)
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-09 23:52 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #21 from bzolnier@gmail.com  2008-11-09 15:52 -------
If the mesh driver is compiled as module in Ubuntu (I don't know that) you may
try blacklisting mesh driver (so it won't be run) by:

- booting from LiveCD

and

- editing /media/disk/etc/modprobe.d/blacklist file
  (just add "blacklist mesh" line at the end of it)


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (20 preceding siblings ...)
  2008-11-09 23:52 ` bugme-daemon
@ 2008-11-10  0:10 ` bugme-daemon
  2008-11-10  0:42 ` bugme-daemon
  2008-11-13 21:17 ` bugme-daemon
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-10  0:10 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #22 from eshaffer1@mac.com  2008-11-09 16:10 -------
(In reply to comment #20)
> Ah, now I understand -- "irqpoll" only helps in getting past IDE messages but
> boot still hangs on mesh driver initialization, right? [ I thought that you can
> now boot successfully the installed system using "irqpoll". ]
> 
> If so this really looks more like a generic platform problem affecting both IDE
> and SCSI (mesh driver has an "interesting" IRQ handling routine that will loop
> forever if IRQ is not cleared).
> 

Correct, "irqpoll /irqfixup" only allow the system to read the partition and
disk info prior to scsi0 : MESH init. Still results in hang at scsi0 : MESH
with subsequent hde/f/h: lost interrupt messages. Installed system has never
successfully completed boot with or without "irqpoll / irqfixup". 

It is curious though that Live CD and alternate CD both load and operate
without error (no hang or stall)...this is dmesg snip from Live CD:

[   14.024619] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[   14.812490] scsi0 : MESH
[   18.354244] hde: max request size: 128KiB
[   18.376470] hde: 195813072 sectors (100256 MB) w/8192KiB Cache,
CHS=65535/16/63
[   18.378049] hde: cache flushes supported
[   18.378165]  hde: [mac] hde1 hde2 hde3 hde4
[   18.387956] hdf: max request size: 128KiB
[   18.401188] hdf: 240121728 sectors (122942 MB) w/7936KiB Cache,
CHS=65535/16/63
[   18.401337] hdf: cache flushes supported
[   18.401413]  hdf: [mac] hdf1 hdf2 hdf3 hdf4 hdf5 hdf6 hdf7 hdf8 hdf9 hdf10
hdf11
[   18.410500] hdh: max request size: 128KiB
[   18.430172] hdh: 195813072 sectors (100256 MB) w/8192KiB Cache,
CHS=65535/16/63
[   18.432317] hdh: cache flushes supported
[   18.432417]  hdh: [mac] hdh1 hdh2 hdh3 hdh4


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (21 preceding siblings ...)
  2008-11-10  0:10 ` bugme-daemon
@ 2008-11-10  0:42 ` bugme-daemon
  2008-11-13 21:17 ` bugme-daemon
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-10  0:42 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943





------- Comment #23 from eshaffer1@mac.com  2008-11-09 16:42 -------
"blacklist mesh" has no apparent effect with or without "irqpoll/irqfixup" when
added to /media/disk/etc/modprobe.d/blacklist.  


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
       [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
                   ` (22 preceding siblings ...)
  2008-11-10  0:42 ` bugme-daemon
@ 2008-11-13 21:17 ` bugme-daemon
  23 siblings, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-13 21:17 UTC (permalink / raw)
  To: linux-ide

http://bugzilla.kernel.org/show_bug.cgi?id=11943


bzolnier@gmail.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
         AssignedTo|io_ide@kernel-bugs.osdl.org |bzolnier@gmail.com
             Status|NEW                         |ASSIGNED




------- Comment #24 from bzolnier@gmail.com  2008-11-13 13:17 -------
Thanks for testing it anyway.  It really seems like a platform specific issue
so I'll re-assing this bug to Platform/PPC for now.


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] New: Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
@ 2008-11-03  7:58 bugme-daemon
  2008-11-03  8:27 ` [Bug 11943] " bugme-daemon
  2008-11-03 12:47 ` bugme-daemon
  0 siblings, 2 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-03  7:58 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11943

           Summary: Boot fails at scsi0:MESH with hde: lost interrupt,
                    AEC6260
           Product: IO/Storage
           Version: 2.5
     KernelVersion: 2.6.25.2.3
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: SCSI
        AssignedTo: linux-scsi@vger.kernel.org
        ReportedBy: eshaffer1@mac.com

Latest working kernel version: none
Earliest failing kernel version: 2.6.24-19
Distribution: Ubuntu
Hardware Environment: PowerMac B&W G3(rev.1) upgraded to G4 600 mHz cpu,
AEC6260 (ide-pci card)
Software Environment: Ubuntu Intrepid
Problem Description: Install successful from Live CD (Hardy) and Alternate CD
(Hardy / Intrepid). Boot proceeds normally until:
scsi0:MESH 
hde: max request size: 128KiB
boot hangs with repeated lost interrupt, DMA recovery messages. Boot cannot
proceed beyond this point. 

Steps to reproduce:

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  2008-11-03  7:58 [Bug 11943] New: " bugme-daemon
@ 2008-11-03  8:27 ` bugme-daemon
  2008-11-03 12:47 ` bugme-daemon
  1 sibling, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-03  8:27 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11943


akpm@osdl.org changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
          Component|SCSI                        |IDE




------- Comment #1 from akpm@osdl.org  2008-11-03 00:27 -------
Thanks - I'll reassign this to io-ide (although it sounds like an
acpi or x86 problem).


-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  2008-11-03  7:58 [Bug 11943] New: " bugme-daemon
  2008-11-03  8:27 ` [Bug 11943] " bugme-daemon
@ 2008-11-03 12:47 ` bugme-daemon
  1 sibling, 0 replies; 26+ messages in thread
From: bugme-daemon @ 2008-11-03 12:47 UTC (permalink / raw)
  To: linux-scsi

http://bugzilla.kernel.org/show_bug.cgi?id=11943


bzolnier@gmail.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
         AssignedTo|linux-scsi@vger.kernel.org  |bzolnier@gmail.com
             Status|NEW                         |ASSIGNED




-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
You are the assignee for the bug, or are watching the assignee.

^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, other threads:[~2008-11-13 21:17 UTC | newest]

Thread overview: 26+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <bug-11943-11633@http.bugzilla.kernel.org/>
2008-11-03 12:48 ` [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260 bugme-daemon
2008-11-03 12:52 ` bugme-daemon
2008-11-03 18:03 ` bugme-daemon
2008-11-03 18:16 ` bugme-daemon
2008-11-06 23:50 ` bugme-daemon
2008-11-08  3:13 ` bugme-daemon
2008-11-08  3:13 ` bugme-daemon
2008-11-09 16:07 ` bugme-daemon
2008-11-09 16:08 ` bugme-daemon
2008-11-09 16:58 ` bugme-daemon
2008-11-09 19:47 ` bugme-daemon
2008-11-09 19:59 ` bugme-daemon
2008-11-09 21:15 ` bugme-daemon
2008-11-09 21:50 ` bugme-daemon
2008-11-09 22:05 ` bugme-daemon
2008-11-09 22:26 ` bugme-daemon
2008-11-09 22:40 ` bugme-daemon
2008-11-09 23:00 ` bugme-daemon
2008-11-09 23:20 ` bugme-daemon
2008-11-09 23:45 ` bugme-daemon
2008-11-09 23:52 ` bugme-daemon
2008-11-10  0:10 ` bugme-daemon
2008-11-10  0:42 ` bugme-daemon
2008-11-13 21:17 ` bugme-daemon
2008-11-03  7:58 [Bug 11943] New: " bugme-daemon
2008-11-03  8:27 ` [Bug 11943] " bugme-daemon
2008-11-03 12:47 ` bugme-daemon

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.