All of lore.kernel.org
 help / color / mirror / Atom feed
* [ath9k-devel] Channels
@ 2008-11-04 15:55 Van de Velde Erwin
  2008-11-05 13:08 ` Benoit PAPILLAULT
  0 siblings, 1 reply; 3+ messages in thread
From: Van de Velde Erwin @ 2008-11-04 15:55 UTC (permalink / raw)
  To: ath9k-devel

Hi all, 

`iwlist wlan0 channel` shows me the following output on my laptop (AR5418 
card):

wlan0     24 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 36 : 5.18 GHz
          Channel 40 : 5.2 GHz
          Channel 44 : 5.22 GHz
          Channel 48 : 5.24 GHz
          Channel 52 : 5.26 GHz
          Channel 56 : 5.28 GHz
          Channel 60 : 5.3 GHz
          Channel 64 : 5.32 GHz
          Channel 149 : 5.745 GHz
          Channel 153 : 5.765 GHz
          Channel 157 : 5.785 GHz
          Channel 161 : 5.805 GHz
          Channel 165 : 5.825 GHz
          Current Frequency:2.412 GHz (Channel 1)

Is it possible to use e.g. Ch 12-13? How can I configure this?

Thanks in adv,
Erwin

^ permalink raw reply	[flat|nested] 3+ messages in thread
* [ath9k-devel] Channels
  2008-11-04 15:55 [ath9k-devel] Channels Van de Velde Erwin
@ 2008-11-05 13:08 ` Benoit PAPILLAULT
  2008-11-05 19:40   ` Luis R. Rodriguez
  0 siblings, 1 reply; 3+ messages in thread
From: Benoit PAPILLAULT @ 2008-11-05 13:08 UTC (permalink / raw)
  To: ath9k-devel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Van de Velde Erwin a ?crit :
> Hi all, 
> 
> `iwlist wlan0 channel` shows me the following output on my laptop (AR5418 
> card):
> 
> wlan0     24 channels in total; available frequencies :
>           Channel 01 : 2.412 GHz
>           Channel 02 : 2.417 GHz
>           Channel 03 : 2.422 GHz
>           Channel 04 : 2.427 GHz
>           Channel 05 : 2.432 GHz
>           Channel 06 : 2.437 GHz
>           Channel 07 : 2.442 GHz
>           Channel 08 : 2.447 GHz
>           Channel 09 : 2.452 GHz
>           Channel 10 : 2.457 GHz
>           Channel 11 : 2.462 GHz
>           Channel 36 : 5.18 GHz
>           Channel 40 : 5.2 GHz
>           Channel 44 : 5.22 GHz
>           Channel 48 : 5.24 GHz
>           Channel 52 : 5.26 GHz
>           Channel 56 : 5.28 GHz
>           Channel 60 : 5.3 GHz
>           Channel 64 : 5.32 GHz
>           Channel 149 : 5.745 GHz
>           Channel 153 : 5.765 GHz
>           Channel 157 : 5.785 GHz
>           Channel 161 : 5.805 GHz
>           Channel 165 : 5.825 GHz
>           Current Frequency:2.412 GHz (Channel 1)
> 
> Is it possible to use e.g. Ch 12-13? How can I configure this?
> 
> Thanks in adv,
> Erwin
> 
> 
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
> 

You need to set the country code with, for instance : iw reg set FR
The EEPROM of the card can also limit the number of channels AFAIK.

Regards,
Benoit

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFJEZrTOR6EySwP7oIRAq9FAJ9iQnvLr6KXNsqblM/uQEj4PiI7KwCeLuuO
O7yBI3uDD+o0Uy2JXWzlS0Q=
=XLia
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 3+ messages in thread
* [ath9k-devel] Channels
  2008-11-05 13:08 ` Benoit PAPILLAULT
@ 2008-11-05 19:40   ` Luis R. Rodriguez
  0 siblings, 0 replies; 3+ messages in thread
From: Luis R. Rodriguez @ 2008-11-05 19:40 UTC (permalink / raw)
  To: ath9k-devel

On Wed, Nov 05, 2008 at 05:08:35AM -0800, Benoit PAPILLAULT wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Van de Velde Erwin a ?crit :
> > Hi all,
> >
> > `iwlist wlan0 channel` shows me the following output on my laptop (AR5418
> > card):
> >
> > wlan0     24 channels in total; available frequencies :
> >           Channel 01 : 2.412 GHz
> >           Channel 02 : 2.417 GHz
> >           Channel 03 : 2.422 GHz
> >           Channel 04 : 2.427 GHz
> >           Channel 05 : 2.432 GHz
> >           Channel 06 : 2.437 GHz
> >           Channel 07 : 2.442 GHz
> >           Channel 08 : 2.447 GHz
> >           Channel 09 : 2.452 GHz
> >           Channel 10 : 2.457 GHz
> >           Channel 11 : 2.462 GHz
> >           Channel 36 : 5.18 GHz
> >           Channel 40 : 5.2 GHz
> >           Channel 44 : 5.22 GHz
> >           Channel 48 : 5.24 GHz
> >           Channel 52 : 5.26 GHz
> >           Channel 56 : 5.28 GHz
> >           Channel 60 : 5.3 GHz
> >           Channel 64 : 5.32 GHz
> >           Channel 149 : 5.745 GHz
> >           Channel 153 : 5.765 GHz
> >           Channel 157 : 5.785 GHz
> >           Channel 161 : 5.805 GHz
> >           Channel 165 : 5.825 GHz
> >           Current Frequency:2.412 GHz (Channel 1)
> >
> > Is it possible to use e.g. Ch 12-13? How can I configure this?
> >
> > Thanks in adv,
> > Erwin
> >
> >
> > _______________________________________________
> > ath9k-devel mailing list
> > ath9k-devel at lists.ath9k.org
> > https://lists.ath9k.org/mailman/listinfo/ath9k-devel
> >
> 
> You need to set the country code with, for instance : iw reg set FR

ACK

> The EEPROM of the card can also limit the number of channels AFAIK.

ACK -- and the only way this will change is through 802.11d which we are
working on now.

  Luis

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-11-05 19:40 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-04 15:55 [ath9k-devel] Channels Van de Velde Erwin
2008-11-05 13:08 ` Benoit PAPILLAULT
2008-11-05 19:40   ` Luis R. Rodriguez

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.