All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: David Brownell <david-b@pacbell.net>
Cc: Steve Sakoman <sakoman@gmail.com>, linux-omap@vger.kernel.org
Subject: Re: [PATCH 3/4] HSMMC: Add support for the second controller
Date: Thu, 6 Nov 2008 09:04:45 -0800	[thread overview]
Message-ID: <20081106170445.GU21736@atomide.com> (raw)
In-Reply-To: <200811052309.59974.david-b@pacbell.net>

* David Brownell <david-b@pacbell.net> [081105 23:10]:
> On Wednesday 05 November 2008, Tony Lindgren wrote:
> > OK, I've pushed the hsmmc init patches. They still need work though.
> > 
> > Please everybody check your board MMC configuration and send patches
> > as needed.
> 
> See the appended build fixes ... :)

Oops, sorry I did not expect that kind of fixes!

> Also, I suspect there needs to be an MMC_CAP_8_BIT_DATA at
> some point, with hsmmc driver support.
> 
> 
> > Also the write protect interrupts are not handled, and gpio handling
> > is twl specific. Hopefully a better base for the code anyways.
> 
> I'll have a look at write protect ... it wouldn't normally
> be an IRQ, just an input GPIO.  Unlike the CD, which gets
> used for both purposes; that code looks iffy too.

OK. We also need to figure out what to do if we need to support other
gpios than twl gpios.

> Yes, a better base.

Thanks, pushing.

Tony

> 
> - Dave
>  
> 
> ========= CUT HERE
> From: David Brownell <dbrownell@users.sourceforge.net>
> 
> Build fixes for "HSMMC: Improve the interface for hsmmc_init()".
> The header file needs to work without MMC support enabled, and
> some board files needed to include it.
> 
> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> ---
>  arch/arm/mach-omap2/board-2430sdp.c      |    3 +++
>  arch/arm/mach-omap2/board-ldp.c          |    3 +++
>  arch/arm/mach-omap2/board-omap2evm.c     |    3 +++
>  arch/arm/mach-omap2/board-omap3beagle.c  |    2 ++
>  arch/arm/mach-omap2/board-omap3evm.c     |    2 ++
>  arch/arm/mach-omap2/board-omap3pandora.c |    2 ++
>  arch/arm/mach-omap2/mmc-twl4030.h        |    8 ++++----
>  7 files changed, 19 insertions(+), 4 deletions(-)
> 
> --- a/arch/arm/mach-omap2/board-2430sdp.c
> +++ b/arch/arm/mach-omap2/board-2430sdp.c
> @@ -44,6 +44,9 @@
>  
>  #include <asm/io.h>
>  
> +#include "mmc-twl4030.h"
> +
> +
>  #define	SDP2430_FLASH_CS	0
>  #define	SDP2430_SMC91X_CS	5
>  
> --- a/arch/arm/mach-omap2/board-ldp.c
> +++ b/arch/arm/mach-omap2/board-ldp.c
> @@ -41,6 +41,9 @@
>  #include <asm/delay.h>
>  #include <mach/control.h>
>  
> +#include "mmc-twl4030.h"
> +
> +
>  #define CONFIG_DISABLE_HFCLK 1
>  
>  #define ENABLE_VAUX1_DEDICATED	0x03
> --- a/arch/arm/mach-omap2/board-omap2evm.c
> +++ b/arch/arm/mach-omap2/board-omap2evm.c
> @@ -41,6 +41,9 @@
>  #include <mach/mcspi.h>
>  #include <mach/mux.h>
>  
> +#include "mmc-twl4030.h"
> +
> +
>  #define GPMC_OFF_CONFIG1_0 0x60
>  
>  static struct mtd_partition omap2evm_nand_partitions[] = {
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -44,6 +44,8 @@
>  #include <mach/mux.h>
>  
>  #include "twl4030-generic-scripts.h"
> +#include "mmc-twl4030.h"
> +
>  
>  #define GPMC_CS0_BASE  0x60
>  #define GPMC_CS_SIZE   0x30
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -40,6 +40,8 @@
>  
>  #include "sdram-micron-mt46h32m32lf-6.h"
>  #include "twl4030-generic-scripts.h"
> +#include "mmc-twl4030.h"
> +
>  
>  static struct resource omap3evm_smc911x_resources[] = {
>  	[0] =	{
> --- a/arch/arm/mach-omap2/board-omap3pandora.c
> +++ b/arch/arm/mach-omap2/board-omap3pandora.c
> @@ -47,6 +47,8 @@
>  #include <mach/usb-musb.h>
>  
>  #include "sdram-micron-mt46h32m32lf-6.h"
> +#include "mmc-twl4030.h"
> +
>  
>  #define NAND_BLOCK_SIZE SZ_128K
>  #define GPMC_CS0_BASE  0x60
> --- a/arch/arm/mach-omap2/mmc-twl4030.h
> +++ b/arch/arm/mach-omap2/mmc-twl4030.h
> @@ -6,20 +6,20 @@
>   * published by the Free Software Foundation.
>   */
>  
> -#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
> -	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
> -
>  struct twl4030_hsmmc_info {
>  	u8	mmc;		/* controller 1/2/3 */
>  	u8	wires;		/* 1/4/8 wires */
>  	int	gpio_cd;	/* or -EINVAL */
>  };
>  
> +#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
> +	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
> +
>  void hsmmc_init(struct twl4030_hsmmc_info *);
>  
>  #else
>  
> -static inline void hsmmc_init(struct twl4030_hsmmc_info *)
> +static inline void hsmmc_init(struct twl4030_hsmmc_info *info)
>  {
>  }
>  
> 

  reply	other threads:[~2008-11-06 17:04 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-31  2:04 [PATCH 0/4] Init updates for hsmmc, also second controller Tony Lindgren
2008-10-31  2:04 ` [PATCH 1/4] HSMMC: Make hsmmc use omap_ctrl_read/write and existing defines Tony Lindgren
2008-10-31  2:04   ` [PATCH 2/4] HSMMC: Fix voltage defines, make card detect gpio controller specific Tony Lindgren
2008-10-31  2:04     ` [PATCH 3/4] HSMMC: Add support for the second controller Tony Lindgren
2008-10-31  2:04       ` [PATCH 4/4] HSMMC: Misc clean-up for hsmmc init Tony Lindgren
2008-10-31  3:12       ` [PATCH 3/4] HSMMC: Add support for the second controller David Brownell
2008-10-31  3:39         ` Tony Lindgren
2008-10-31  6:41           ` David Brownell
2008-10-31 16:35             ` Tony Lindgren
2008-10-31  4:05         ` Steve Sakoman
2008-10-31 10:00           ` David Brownell
2008-10-31 23:35             ` Steve Sakoman
2008-11-01  0:36               ` David Brownell
2008-11-01  2:31                 ` Felipe Balbi
2008-11-01  2:50                 ` Steve Sakoman
2008-11-01  3:02                   ` David Brownell
2008-11-01  3:11                     ` Steve Sakoman
2008-11-03 22:54             ` Steve Sakoman
2008-11-03 23:22               ` Tony Lindgren
2008-11-03 23:36               ` Steve Sakoman
2008-11-05 23:54                 ` David Brownell
2008-11-06  3:32                   ` Tony Lindgren
2008-11-06  7:09                     ` David Brownell
2008-11-06 17:04                       ` Tony Lindgren [this message]
2008-11-06 20:19                         ` Grazvydas Ignotas
2008-11-07  5:54                           ` David Brownell
2008-11-07  9:36                             ` Grazvydas Ignotas
2008-11-10 10:36                               ` Grazvydas Ignotas
2008-11-12 22:11                                 ` Tony Lindgren
2008-11-06 20:52                         ` David Brownell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081106170445.GU21736@atomide.com \
    --to=tony@atomide.com \
    --cc=david-b@pacbell.net \
    --cc=linux-omap@vger.kernel.org \
    --cc=sakoman@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.