* Transferring images to flash avr32
@ 2008-11-12 16:33 Gerwin van der Kruis
2008-11-13 14:08 ` Leon Woestenberg
0 siblings, 1 reply; 4+ messages in thread
From: Gerwin van der Kruis @ 2008-11-12 16:33 UTC (permalink / raw)
To: openembedded-devel
Dear All,
I managed to succesfully compile the images for avr32 .
I want to use tftp and u-boot to boot the images on my ATNGW100 board.
Is there somewhere a manual how to put the images on the board ?
Or can somebody sent me the steps necessary ?
Regards,
Gerwin
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Transferring images to flash avr32
2008-11-12 16:33 Transferring images to flash avr32 Gerwin van der Kruis
@ 2008-11-13 14:08 ` Leon Woestenberg
2008-11-13 15:03 ` Gerwin van der Kruis
0 siblings, 1 reply; 4+ messages in thread
From: Leon Woestenberg @ 2008-11-13 14:08 UTC (permalink / raw)
To: openembedded-devel
Gerwin,
On Wed, Nov 12, 2008 at 5:33 PM, Gerwin van der Kruis
<gerwin@vanderkruis.net> wrote:
> I managed to succesfully compile the images for avr32 .
>
> I want to use tftp and u-boot to boot the images on my ATNGW100 board.
>
> Is there somewhere a manual how to put the images on the board ?
>
What is your starting point?
Do you have an existing u-boot in FlashROM?
Do you have a JTAG programmer (the Atmel specific programming device,
cannot remember its name, it's blue-ish).
Regards,
--
Leon
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Transferring images to flash avr32
2008-11-13 14:08 ` Leon Woestenberg
@ 2008-11-13 15:03 ` Gerwin van der Kruis
2008-11-14 3:37 ` Gerwin van der Kruis
0 siblings, 1 reply; 4+ messages in thread
From: Gerwin van der Kruis @ 2008-11-13 15:03 UTC (permalink / raw)
To: openembedded-devel
On Thursday 13 November 2008 15:08:17 Leon Woestenberg wrote:
> Gerwin,
>
> On Wed, Nov 12, 2008 at 5:33 PM, Gerwin van der Kruis
>
> <gerwin@vanderkruis.net> wrote:
> > I managed to succesfully compile the images for avr32 .
> >
> > I want to use tftp and u-boot to boot the images on my ATNGW100 board.
> >
> > Is there somewhere a manual how to put the images on the board ?
>
> What is your starting point?
>
> Do you have an existing u-boot in FlashROM?
Yes
> Do you have a JTAG programmer (the Atmel specific programming device,
> cannot remember its name, it's blue-ish).
>
No
> Regards,
Regards,
Gerwin
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Transferring images to flash avr32
2008-11-13 15:03 ` Gerwin van der Kruis
@ 2008-11-14 3:37 ` Gerwin van der Kruis
0 siblings, 0 replies; 4+ messages in thread
From: Gerwin van der Kruis @ 2008-11-14 3:37 UTC (permalink / raw)
To: openembedded-devel
On Thursday 13 November 2008 16:03:56 Gerwin van der Kruis wrote:
> On Thursday 13 November 2008 15:08:17 Leon Woestenberg wrote:
> > Gerwin,
> >
> > On Wed, Nov 12, 2008 at 5:33 PM, Gerwin van der Kruis
> >
> > <gerwin@vanderkruis.net> wrote:
> > > I managed to succesfully compile the images for avr32 .
> > >
> > > I want to use tftp and u-boot to boot the images on my ATNGW100 board.
> > >
> > > Is there somewhere a manual how to put the images on the board ?
Problem solved managed to load images.
If I load an old minimal-image it works , the atngw100 is booting .
With a new freshly compiled image it is booting but than dies with a signal 11
in init.
I am unsure why this is .
Regards,
Gerwin
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-11-14 3:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-12 16:33 Transferring images to flash avr32 Gerwin van der Kruis
2008-11-13 14:08 ` Leon Woestenberg
2008-11-13 15:03 ` Gerwin van der Kruis
2008-11-14 3:37 ` Gerwin van der Kruis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.