From: David Brownell <david-b@pacbell.net>
To: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>,
Li Yang <leoli@freescale.com>,
linux-usb@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 1/6] usb/fsl_qe_udc: Fix oops on QE UDC probe failure
Date: Mon, 17 Nov 2008 17:55:00 -0800 [thread overview]
Message-ID: <200811171755.00521.david-b@pacbell.net> (raw)
In-Reply-To: <20081111160320.GA24699@oksana.dev.rtsoft.ru>
On Tuesday 11 November 2008, Anton Vorontsov wrote:
> In case of probing errors the driver kfrees the udc_controller, but it
> doesn't set the pointer to NULL.
>
> When usb_gadget_register_driver is called, it checks for udc_controller
> != NULL, the check passes and the driver accesses nonexistent memory.
> Fix this by setting udc_controller to NULL in case of errors.
>
> While at it, also implement irq_of_parse_and_map()'s failure and cleanup
> cases.
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
I seem to detect a lot of bugfix activity here, which
tends to reflect usage ... good! :)
> ---
> drivers/usb/gadget/fsl_qe_udc.c | 9 ++++++++-
> 1 files changed, 8 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
> index 94c38e4..60b9279 100644
> --- a/drivers/usb/gadget/fsl_qe_udc.c
> +++ b/drivers/usb/gadget/fsl_qe_udc.c
> @@ -2601,6 +2601,10 @@ static int __devinit qe_udc_probe(struct of_device *ofdev,
> (unsigned long)udc_controller);
> /* request irq and disable DR */
> udc_controller->usb_irq = irq_of_parse_and_map(np, 0);
> + if (!udc_controller->usb_irq) {
> + ret = -EINVAL;
> + goto err_noirq;
> + }
>
> ret = request_irq(udc_controller->usb_irq, qe_udc_irq, 0,
> driver_name, udc_controller);
> @@ -2622,6 +2626,8 @@ static int __devinit qe_udc_probe(struct of_device *ofdev,
> err6:
> free_irq(udc_controller->usb_irq, udc_controller);
> err5:
> + irq_dispose_mapping(udc_controller->usb_irq);
> +err_noirq:
> if (udc_controller->nullmap) {
> dma_unmap_single(udc_controller->gadget.dev.parent,
> udc_controller->nullp, 256,
> @@ -2645,7 +2651,7 @@ err2:
> iounmap(udc_controller->usb_regs);
> err1:
> kfree(udc_controller);
> -
> + udc_controller = NULL;
> return ret;
> }
>
> @@ -2707,6 +2713,7 @@ static int __devexit qe_udc_remove(struct of_device *ofdev)
> kfree(ep->txframe);
>
> free_irq(udc_controller->usb_irq, udc_controller);
> + irq_dispose_mapping(udc_controller->usb_irq);
>
> tasklet_kill(&udc_controller->rx_tasklet);
>
> --
> 1.5.6.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
next prev parent reply other threads:[~2008-11-18 2:14 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-11 16:01 [PATCH 0/6] More QE UDC fixes Anton Vorontsov
2008-11-11 16:03 ` [PATCH 1/6] usb/fsl_qe_udc: Fix oops on QE UDC probe failure Anton Vorontsov
2008-11-18 1:55 ` David Brownell [this message]
2008-11-11 16:03 ` [PATCH 2/6] usb/fsl_qe_udc: Fix recursive locking bug in ch9getstatus() Anton Vorontsov
2008-11-18 1:59 ` David Brownell
2008-11-18 17:51 ` [PATCH 2/6 v2] " Anton Vorontsov
2008-11-18 22:13 ` David Brownell
2008-11-19 0:20 ` [PATCH 2/6 v3] " Anton Vorontsov
2008-11-20 5:41 ` David Brownell
2008-11-11 16:03 ` [PATCH 3/6] usb/fsl_qe_udc: Fix QE USB controller initialization Anton Vorontsov
2008-11-11 16:03 ` [PATCH 4/6] usb/fsl_qe_udc: Fix disconnects reporting during bus reset Anton Vorontsov
2008-11-18 1:48 ` David Brownell
2008-11-11 16:03 ` [PATCH 5/6] usb/fsl_qe_udc: Fix muram corruption by disabled endpoints Anton Vorontsov
2008-11-18 1:52 ` David Brownell
2008-11-11 16:03 ` [PATCH 6/6] usb/fsl_qe_udc: Fix stalled TX requests bug Anton Vorontsov
2008-11-18 1:53 ` David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811171755.00521.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=avorontsov@ru.mvista.com \
--cc=dbrownell@users.sourceforge.net \
--cc=greg@kroah.com \
--cc=leoli@freescale.com \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.