All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Schmidt <stefan-OrPQZGeq07wqhVmZOOOmNx2eb7JE58TQ@public.gmane.org>
To: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
Cc: Stefan Schmidt <stefan-4Bgg8jF3iZdg9hUCZPvPmw@public.gmane.org>,
	eric.y.miao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	sameo-RWuK6r/cQWRpLGFMi4vTTA@public.gmane.org,
	linux-arm-kernel-xIg/pKzrS19vn6HldHNs0ANdhmdF6hFW@public.gmane.org,
	Daniel Ribeiro <drwyrm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: Re: [patch 05/14] mfd: PCAP2 driver
Date: Sun, 23 Nov 2008 01:33:06 +0100	[thread overview]
Message-ID: <20081123003306.GE24437@datenfreihafen.org> (raw)
In-Reply-To: <200811221558.03915.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>

On Sat, 2008-11-22 at 15:58, David Brownell wrote:
> On Saturday 22 November 2008, Stefan Schmidt wrote:
> > > > +config EZX_PCAP
> > > > +       bool "PCAP Support"
> > > > +       depends on PXA_EZX
> > > 
> > > It only builds on one platform.  Now, that may make sense if it's
> > > an ASIC currently used only on that platform; it's a "hardware"
> > > dependency.  But it's not a necessary "software" dependency, no
> > > code here seems to rely on PXA hardware, or EZX hardware.
> > 
> > It is software and we are on the way fixing it.
> 
> Good.  I've only seen patch #5 of this series, so I couldn't
> tell what else was up.

Sorry. This set touched a lot of different subsystems. (ARM, spi, rtc, input,
mfd, ..) The To: and Cc: list gave me quite some headache. :) Next time I make
sure that at least LKML is cc'ed on the whle series so people have a lace to
look at it in one thread.

> > Understand. We have been a bit lazy here, sorry. That is mostly based on the
> > fact that we have never seen any other linux devices having this chip. Only some
> > low power feature phones with the P2K OS from Motorola. Anyway, we work on it to
> > get it more generic now.
> 
> Looks to me like you're almost all the way there already!  :)

We hope so, yes. :) Once we have the EZX/PXA dep gone you are fine with this
patch? All SPI related stuff is ok from you?

> Much like we're doing with the twl4030 family chips ... they're
> used on a lot of OMAP3 (and some OMAP2430) boards, and some
> build dependencies evolved over the past year or so while
> the driver support was maturing out of mainline.

Yeah, pretty similar. We had to start from 2.4 driver code to get in touch with
this chip. Motorola did not offer any docs. Also the usual embedded board
out-of-tree problem. We are doing a lot better now since the last two kernels
though. Better workflow, tools, faster reaction on review and more energy
towards upstream submissions.

regards
Stefan Schmidt

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/

WARNING: multiple messages have this Message-ID (diff)
From: Stefan Schmidt <stefan@datenfreihafen.org>
To: David Brownell <david-b@pacbell.net>
Cc: Stefan Schmidt <stefan@openmoko.org>,
	spi-devel-general@lists.sourceforge.net, eric.y.miao@gmail.com,
	linux-kernel@vger.kernel.org, sameo@openedhand.com,
	linux-arm-kernel@lists.arm.linux.org.uk,
	Daniel Ribeiro <drwyrm@gmail.com>
Subject: Re: [spi-devel-general] [patch 05/14] mfd: PCAP2 driver
Date: Sun, 23 Nov 2008 01:33:06 +0100	[thread overview]
Message-ID: <20081123003306.GE24437@datenfreihafen.org> (raw)
In-Reply-To: <200811221558.03915.david-b@pacbell.net>

On Sat, 2008-11-22 at 15:58, David Brownell wrote:
> On Saturday 22 November 2008, Stefan Schmidt wrote:
> > > > +config EZX_PCAP
> > > > +       bool "PCAP Support"
> > > > +       depends on PXA_EZX
> > > 
> > > It only builds on one platform.  Now, that may make sense if it's
> > > an ASIC currently used only on that platform; it's a "hardware"
> > > dependency.  But it's not a necessary "software" dependency, no
> > > code here seems to rely on PXA hardware, or EZX hardware.
> > 
> > It is software and we are on the way fixing it.
> 
> Good.  I've only seen patch #5 of this series, so I couldn't
> tell what else was up.

Sorry. This set touched a lot of different subsystems. (ARM, spi, rtc, input,
mfd, ..) The To: and Cc: list gave me quite some headache. :) Next time I make
sure that at least LKML is cc'ed on the whle series so people have a lace to
look at it in one thread.

> > Understand. We have been a bit lazy here, sorry. That is mostly based on the
> > fact that we have never seen any other linux devices having this chip. Only some
> > low power feature phones with the P2K OS from Motorola. Anyway, we work on it to
> > get it more generic now.
> 
> Looks to me like you're almost all the way there already!  :)

We hope so, yes. :) Once we have the EZX/PXA dep gone you are fine with this
patch? All SPI related stuff is ok from you?

> Much like we're doing with the twl4030 family chips ... they're
> used on a lot of OMAP3 (and some OMAP2430) boards, and some
> build dependencies evolved over the past year or so while
> the driver support was maturing out of mainline.

Yeah, pretty similar. We had to start from 2.4 driver code to get in touch with
this chip. Motorola did not offer any docs. Also the usual embedded board
out-of-tree problem. We are doing a lot better now since the last two kernels
though. Better workflow, tools, faster reaction on review and more energy
towards upstream submissions.

regards
Stefan Schmidt

  parent reply	other threads:[~2008-11-23  0:33 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20081121160403.073751031@dodger.lab.datenfreihafen.org>
2008-11-21 16:04 ` [patch 05/14] mfd: PCAP2 driver stefan-OrPQZGeq07wqhVmZOOOmNx2eb7JE58TQ
2008-11-21 16:04   ` stefan
     [not found]   ` <20081121160521.016544616-cQQG9CVUopzFITZdfPi31ZcF1vblOVnWhIvA6WVW+J8@public.gmane.org>
2008-11-22  5:25     ` David Brownell
2008-11-22  5:25       ` [spi-devel-general] " David Brownell
2008-11-22 14:01       ` Eric Miao
     [not found]         ` <f17812d70811220601p1d7af668mf3265224179753ab-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-11-22 15:54           ` Daniel Ribeiro
2008-11-22 15:54             ` [spi-devel-general] " Daniel Ribeiro
2008-11-22 19:08             ` David Brownell
2008-11-22 19:08               ` [spi-devel-general] " David Brownell
     [not found]               ` <200811221108.54331.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-22 23:29                 ` Stefan Schmidt
2008-11-22 23:29                   ` [spi-devel-general] " Stefan Schmidt
     [not found]       ` <200811212125.49068.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-22 17:12         ` Daniel Ribeiro
2008-11-22 17:12           ` [spi-devel-general] " Daniel Ribeiro
2008-11-22 19:19           ` David Brownell
2008-11-22 19:19             ` [spi-devel-general] " David Brownell
     [not found]             ` <200811221119.27981.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-22 23:33               ` Stefan Schmidt
2008-11-22 23:33                 ` [spi-devel-general] " Stefan Schmidt
     [not found]                 ` <20081122233356.GC24437-OrPQZGeq07wqhVmZOOOmNx2eb7JE58TQ@public.gmane.org>
2008-11-22 23:58                   ` David Brownell
2008-11-22 23:58                     ` [spi-devel-general] " David Brownell
     [not found]                     ` <200811221558.03915.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-23  0:33                       ` Stefan Schmidt [this message]
2008-11-23  0:33                         ` Stefan Schmidt
     [not found]                         ` <20081123003306.GE24437-OrPQZGeq07wqhVmZOOOmNx2eb7JE58TQ@public.gmane.org>
2008-11-23  2:19                           ` David Brownell
2008-11-23  2:19                             ` [spi-devel-general] " David Brownell
     [not found]                             ` <200811221819.53186.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-23  3:38                               ` Daniel Ribeiro
2008-11-23  3:38                                 ` [spi-devel-general] " Daniel Ribeiro
2008-11-23  4:59                                 ` David Brownell
2008-11-23  4:59                                   ` [spi-devel-general] " David Brownell
     [not found]                                   ` <200811222059.59806.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-23  7:06                                     ` Daniel Ribeiro
2008-11-23  7:06                                       ` [spi-devel-general] " Daniel Ribeiro
2008-11-23  8:26                                       ` David Brownell
2008-11-23  8:26                                         ` [spi-devel-general] " David Brownell
2008-11-21 16:04 ` [patch 08/14] input: PCAP2 based touchscreen driver stefan
2008-11-21 16:04   ` stefan
2008-11-21 17:05   ` Dmitry Torokhov
2008-11-22  0:00     ` Stefan Schmidt
2009-04-21  2:18       ` Dmitry Torokhov
2009-04-21  2:38         ` Daniel Ribeiro
2009-04-21  2:38           ` Daniel Ribeiro
2008-11-21 16:04 ` [patch 10/14] LED: PCAP2 based LED driver stefan
2008-11-22 14:08   ` Eric Miao
2008-11-22 15:46     ` Daniel Ribeiro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081123003306.GE24437@datenfreihafen.org \
    --to=stefan-orpqzgeq07wqhvmzooomnx2eb7je58tq@public.gmane.org \
    --cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
    --cc=drwyrm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=eric.y.miao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-xIg/pKzrS19vn6HldHNs0ANdhmdF6hFW@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=sameo-RWuK6r/cQWRpLGFMi4vTTA@public.gmane.org \
    --cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=stefan-4Bgg8jF3iZdg9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.