All of lore.kernel.org
 help / color / mirror / Atom feed
* mdadm and automatic re-add / incremental mode with usb-disk
@ 2008-11-30 11:31 Wilhelm Meier
  2008-11-30 11:48 ` Justin Piszcz
  2008-12-01  0:32 ` NeilBrown
  0 siblings, 2 replies; 8+ messages in thread
From: Wilhelm Meier @ 2008-11-30 11:31 UTC (permalink / raw)
  To: linux-raid

Hi,

I'm using debian etch with mdadm 2.5.6-9.

I have a md-device /dev/md1000 with two usb-disks as raid1. The array 
is assembled well if the system boots, if I unplug one of the disks, 
the array goes to degraded. Thats all ok.

If I re-plug the usb-disk, udev discovers the device fine, but mdadm 
doesn't start the re-add to the md-array. I have to do this but hand.

Is there something missing to make this work automatically?

I tried the mdm-2.6.2 from etch-backports too. Same effect.

Here, if I try to use the --incremental mode, it constructs a new (!) 
array /dev/md/d_1000  instead of adding it to /dev/md1000. 
Thats strange to me.

I thought I got it working some weeks ago (maybe with earlier / other 
versions of mdadm or somme missing other tool), but I can't get the 
puzzle right now.

Any hints?
-- 
Wilhelm

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2008-12-01 15:21 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-30 11:31 mdadm and automatic re-add / incremental mode with usb-disk Wilhelm Meier
2008-11-30 11:48 ` Justin Piszcz
2008-11-30 13:03   ` Wilhelm Meier
2008-11-30 13:10     ` Justin Piszcz
2008-11-30 13:52       ` Wilhelm Meier
2008-12-01 15:21     ` Mario 'BitKoenig' Holbe
2008-12-01  0:32 ` NeilBrown
2008-12-01  6:46   ` Wilhelm Meier

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.