From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [git pull] IDE fixes for 2.6.28-rc7
Date: Tue, 2 Dec 2008 21:02:14 +0100 [thread overview]
Message-ID: <200812022102.14690.bzolnier@gmail.com> (raw)
* amd74xx host driver fix for nVidia controllers (this should take
care of most bugreports about ATAPI devices not working properly)
[ libata developers are encouraged to copy the fix to pata_amd
(the issue manifests itself with pata_amd reporting diagnostics
failure on good devices) ]
* quirk for SAMSUNG SP0822N with firmware WA100-10 to allow UDMA > 33
* fix ide_release_lock imbalance for Atari (from Michael Schmitz)
+ few misc fixes
Linus, please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/
to receive the following updates:
drivers/ide/alim15x3.c | 2 +-
drivers/ide/amd74xx.c | 11 ++++++++++-
drivers/ide/ide-io.c | 30 ++++++++++++++----------------
drivers/ide/ide-iops.c | 9 +++------
drivers/ide/ide-probe.c | 3 ++-
include/linux/ide.h | 8 ++++++++
6 files changed, 38 insertions(+), 25 deletions(-)
Bartlomiej Zolnierkiewicz (5):
amd74xx: workaround unreliable AltStatus register for nVidia controllers
ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[]
ide: respect current DMA setting during resume
ide: fix build for DEBUG_PM
ide: remove dead code from drive_is_ready()
Hannes Eder (1):
alim15x3: fix sparse warning
Michael Schmitz (1):
ide: fix the ide_release_lock imbalance
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index e56c7b7..45d2356 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -591,7 +591,7 @@ static int __init ali15x3_ide_init(void)
static void __exit ali15x3_ide_exit(void)
{
- return pci_unregister_driver(&alim15x3_pci_driver);
+ pci_unregister_driver(&alim15x3_pci_driver);
}
module_init(ali15x3_ide_init);
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index 81ec731..c6bcd30 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -3,7 +3,7 @@
* IDE driver for Linux.
*
* Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
+ * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz
*
* Based on the work of:
* Andre Hedrick
@@ -263,6 +263,15 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_
d.udma_mask = ATA_UDMA5;
}
+ /*
+ * It seems that on some nVidia controllers using AltStatus
+ * register can be unreliable so default to Status register
+ * if the device is in Compatibility Mode.
+ */
+ if (dev->vendor == PCI_VENDOR_ID_NVIDIA &&
+ ide_pci_is_in_compatibility_mode(dev))
+ d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS;
+
printk(KERN_INFO "%s %s: UDMA%s controller\n",
d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 7162d67..7d275b2 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -132,10 +132,14 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
}
EXPORT_SYMBOL(ide_end_request);
-static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
+static void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
{
struct request_pm_state *pm = rq->data;
+#ifdef DEBUG_PM
+ printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
+ drive->name, pm->pm_step);
+#endif
if (drive->media != ide_disk)
return;
@@ -172,7 +176,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
/* Not supported? Switch to next step now. */
if (ata_id_flush_enabled(drive->id) == 0 ||
(drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
- ide_complete_power_step(drive, rq, 0, 0);
+ ide_complete_power_step(drive, rq);
return ide_stopped;
}
if (ata_id_flush_ext_enabled(drive->id))
@@ -191,7 +195,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
if (drive->media != ide_disk)
pm->pm_step = IDE_PM_RESTORE_DMA;
else
- ide_complete_power_step(drive, rq, 0, 0);
+ ide_complete_power_step(drive, rq);
return ide_stopped;
case IDE_PM_IDLE: /* Resume step 2 (idle) */
args->tf.command = ATA_CMD_IDLEIMMEDIATE;
@@ -204,10 +208,8 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
*/
if (drive->hwif->dma_ops == NULL)
break;
- /*
- * TODO: respect IDE_DFLAG_USING_DMA
- */
- ide_set_dma(drive);
+ if (drive->dev_flags & IDE_DFLAG_USING_DMA)
+ ide_set_dma(drive);
break;
}
@@ -322,11 +324,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
}
} else if (blk_pm_request(rq)) {
struct request_pm_state *pm = rq->data;
-#ifdef DEBUG_PM
- printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",
- drive->name, rq->pm->pm_step, stat, err);
-#endif
- ide_complete_power_step(drive, rq, stat, err);
+
+ ide_complete_power_step(drive, rq);
if (pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return;
@@ -804,7 +803,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
struct request_pm_state *pm = rq->data;
#ifdef DEBUG_PM
printk("%s: start_power_step(step: %d)\n",
- drive->name, rq->pm->pm_step);
+ drive->name, pm->pm_step);
#endif
startstop = ide_start_power_step(drive, rq);
if (startstop == ide_stopped &&
@@ -967,14 +966,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
ide_startstop_t startstop;
int loops = 0;
- /* for atari only: POSSIBLY BROKEN HERE(?) */
- ide_get_lock(ide_intr, hwgroup);
-
/* caller must own ide_lock */
BUG_ON(!irqs_disabled());
while (!hwgroup->busy) {
hwgroup->busy = 1;
+ /* for atari only */
+ ide_get_lock(ide_intr, hwgroup);
drive = choose_drive(hwgroup);
if (drive == NULL) {
int sleeping = 0;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 5d6ba14..c41c3b9 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -457,18 +457,14 @@ int drive_is_ready (ide_drive_t *drive)
if (drive->waiting_for_dma)
return hwif->dma_ops->dma_test_irq(drive);
-#if 0
- /* need to guarantee 400ns since last command was issued */
- udelay(1);
-#endif
-
/*
* We do a passive status test under shared PCI interrupts on
* cards that truly share the ATA side interrupt, but may also share
* an interrupt with another pci card/device. We make no assumptions
* about possible isa-pnp and pci-pnp issues yet.
*/
- if (hwif->io_ports.ctl_addr)
+ if (hwif->io_ports.ctl_addr &&
+ (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0)
stat = hwif->tp_ops->read_altstatus(hwif);
else
/* Note: this may clear a pending IRQ!! */
@@ -610,6 +606,7 @@ static const struct drive_list_entry ivb_list[] = {
{ "TSSTcorp CDDVDW SH-S202N" , "SB01" },
{ "TSSTcorp CDDVDW SH-S202H" , "SB00" },
{ "TSSTcorp CDDVDW SH-S202H" , "SB01" },
+ { "SAMSUNG SP0822N" , "WA100-10" },
{ NULL , NULL }
};
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 1649ea5..c55bdbd 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -266,7 +266,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
/* take a deep breath */
msleep(50);
- if (io_ports->ctl_addr) {
+ if (io_ports->ctl_addr &&
+ (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
a = tp_ops->read_altstatus(hwif);
s = tp_ops->read_status(hwif);
if ((a ^ s) & ~ATA_IDX)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 54525be..010fb26 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1296,6 +1296,13 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o
#define ide_pci_register_driver(d) pci_register_driver(d)
#endif
+static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
+{
+ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
+ return 1;
+ return 0;
+}
+
void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
hw_regs_t *, hw_regs_t **);
void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
@@ -1375,6 +1382,7 @@ enum {
IDE_HFLAG_IO_32BIT = (1 << 24),
/* unmask IRQs */
IDE_HFLAG_UNMASK_IRQS = (1 << 25),
+ IDE_HFLAG_BROKEN_ALTSTATUS = (1 << 26),
/* serialize ports if DMA is possible (for sl82c105) */
IDE_HFLAG_SERIALIZE_DMA = (1 << 27),
/* force host out of "simplex" mode */
\0
WARNING: multiple messages have this Message-ID (diff)
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [git pull] IDE fixes for 2.6.28-rc7
Date: Tue, 2 Dec 2008 21:02:14 +0100 [thread overview]
Message-ID: <200812022102.14690.bzolnier@gmail.com> (raw)
* amd74xx host driver fix for nVidia controllers (this should take care of most bugreports about ATAPI devices not working properly)
[ libata developers are encouraged to copy the fix to pata_amd (the issue manifests itself with pata_amd reporting diagnostics failure on good devices) ]
* quirk for SAMSUNG SP0822N with firmware WA100-10 to allow UDMA > 33
* fix ide_release_lock imbalance for Atari (from Michael Schmitz)
+ few misc fixes
Linus, please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/
to receive the following updates:
drivers/ide/alim15x3.c | 2 +- drivers/ide/amd74xx.c | 11 ++++++++++- drivers/ide/ide-io.c | 30 ++++++++++++++---------------- drivers/ide/ide-iops.c | 9 +++------ drivers/ide/ide-probe.c | 3 ++- include/linux/ide.h | 8 ++++++++ 6 files changed, 38 insertions(+), 25 deletions(-)
Bartlomiej Zolnierkiewicz (5): amd74xx: workaround unreliable AltStatus register for nVidia controllers ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[] ide: respect current DMA setting during resume ide: fix build for DEBUG_PM ide: remove dead code from drive_is_ready()
Hannes Eder (1): alim15x3: fix sparse warning
Michael Schmitz (1): ide: fix the ide_release_lock imbalance
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.cindex e56c7b7..45d2356 100644--- a/drivers/ide/alim15x3.c+++ b/drivers/ide/alim15x3.c@@ -591,7 +591,7 @@ static int __init ali15x3_ide_init(void) static void __exit ali15x3_ide_exit(void) {- return pci_unregister_driver(&alim15x3_pci_driver);+ pci_unregister_driver(&alim15x3_pci_driver); } module_init(ali15x3_ide_init);diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.cindex 81ec731..c6bcd30 100644--- a/drivers/ide/amd74xx.c+++ b/drivers/ide/amd74xx.c@@ -3,7 +3,7 @@ * IDE driver for Linux. * * Copyright (c) 2000-2002 Vojtech Pavlik- * Copyright (c) 2007 Bartlomiej Zolnierkiewicz+ * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz * * Based on the work of: * Andre Hedrick@@ -263,6 +263,15 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_ d.udma_mask = ATA_UDMA5; } + /*+ * It seems that on some nVidia controllers using AltStatus+ * register can be unreliable so default to Status register+ * if the device is in Compatibility Mode.+ */+ if (dev->vendor == PCI_VENDOR_ID_NVIDIA &&+ ide_pci_is_in_compatibility_mode(dev))+ d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS;+ printk(KERN_INFO "%s %s: UDMA%s controller\n", d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.cindex 7162d67..7d275b2 100644--- a/drivers/ide/ide-io.c+++ b/drivers/ide/ide-io.c@@ -132,10 +132,14 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) } EXPORT_SYMBOL(ide_end_request); -static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)+static void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { struct request_pm_state *pm = rq->data; +#ifdef DEBUG_PM+ printk(KERN_INFO "%s: complete_power_step(step: %d)\n",+ drive->name, pm->pm_step);+#endif if (drive->media != ide_disk) return; @@ -172,7 +176,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * /* Not supported? Switch to next step now. */ if (ata_id_flush_enabled(drive->id) == 0 || (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {- ide_complete_power_step(drive, rq, 0, 0);+ ide_complete_power_step(drive, rq); return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id))@@ -191,7 +195,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * if (drive->media != ide_disk) pm->pm_step = IDE_PM_RESTORE_DMA; else- ide_complete_power_step(drive, rq, 0, 0);+ ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ args->tf.command = ATA_CMD_IDLEIMMEDIATE;@@ -204,10 +208,8 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * */ if (drive->hwif->dma_ops == NULL) break;- /*- * TODO: respect IDE_DFLAG_USING_DMA- */- ide_set_dma(drive);+ if (drive->dev_flags & IDE_DFLAG_USING_DMA)+ ide_set_dma(drive); break; } @@ -322,11 +324,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) } } else if (blk_pm_request(rq)) { struct request_pm_state *pm = rq->data;-#ifdef DEBUG_PM- printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",- drive->name, rq->pm->pm_step, stat, err);-#endif- ide_complete_power_step(drive, rq, stat, err);++ ide_complete_power_step(drive, rq); if (pm->pm_step == IDE_PM_COMPLETED) ide_complete_pm_request(drive, rq); return;@@ -804,7 +803,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) struct request_pm_state *pm = rq->data; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n",- drive->name, rq->pm->pm_step);+ drive->name, pm->pm_step); #endif startstop = ide_start_power_step(drive, rq); if (startstop == ide_stopped &&@@ -967,14 +966,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) ide_startstop_t startstop; int loops = 0; - /* for atari only: POSSIBLY BROKEN HERE(?) */- ide_get_lock(ide_intr, hwgroup);- /* caller must own ide_lock */ BUG_ON(!irqs_disabled()); while (!hwgroup->busy) { hwgroup->busy = 1;+ /* for atari only */+ ide_get_lock(ide_intr, hwgroup); drive = choose_drive(hwgroup); if (drive == NULL) { int sleeping = 0;diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.cindex 5d6ba14..c41c3b9 100644--- a/drivers/ide/ide-iops.c+++ b/drivers/ide/ide-iops.c@@ -457,18 +457,14 @@ int drive_is_ready (ide_drive_t *drive) if (drive->waiting_for_dma) return hwif->dma_ops->dma_test_irq(drive); -#if 0- /* need to guarantee 400ns since last command was issued */- udelay(1);-#endif- /* * We do a passive status test under shared PCI interrupts on * cards that truly share the ATA side interrupt, but may also share * an interrupt with another pci card/device. We make no assumptions * about possible isa-pnp and pci-pnp issues yet. */- if (hwif->io_ports.ctl_addr)+ if (hwif->io_ports.ctl_addr &&+ (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) stat = hwif->tp_ops->read_altstatus(hwif); else /* Note: this may clear a pending IRQ!! */@@ -610,6 +606,7 @@ static const struct drive_list_entry ivb_list[] = { { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, { "TSSTcorp CDDVDW SH-S202H" , "SB00" }, { "TSSTcorp CDDVDW SH-S202H" , "SB01" },+ { "SAMSUNG SP0822N" , "WA100-10" }, { NULL , NULL } }; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.cindex 1649ea5..c55bdbd 100644--- a/drivers/ide/ide-probe.c+++ b/drivers/ide/ide-probe.c@@ -266,7 +266,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* take a deep breath */ msleep(50); - if (io_ports->ctl_addr) {+ if (io_ports->ctl_addr &&+ (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) { a = tp_ops->read_altstatus(hwif); s = tp_ops->read_status(hwif); if ((a ^ s) & ~ATA_IDX)diff --git a/include/linux/ide.h b/include/linux/ide.hindex 54525be..010fb26 100644--- a/include/linux/ide.h+++ b/include/linux/ide.h@@ -1296,6 +1296,13 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o #define ide_pci_register_driver(d) pci_register_driver(d) #endif +static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)+{+ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)+ return 1;+ return 0;+}+ void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, hw_regs_t *, hw_regs_t **); void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);@@ -1375,6 +1382,7 @@ enum { IDE_HFLAG_IO_32BIT = (1 << 24), /* unmask IRQs */ IDE_HFLAG_UNMASK_IRQS = (1 << 25),+ IDE_HFLAG_BROKEN_ALTSTATUS = (1 << 26), /* serialize ports if DMA is possible (for sl82c105) */ IDE_HFLAG_SERIALIZE_DMA = (1 << 27), /* force host out of "simplex" mode */\0ÿôèº{.nÇ+·®+%Ëÿ±éݶ\x17¥wÿº{.nÇ+·¥{±þG«éÿ{ayº\x1dÊÚë,j\a¢f£¢·hïêÿêçz_è®\x03(éÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?¨èÚ&£ø§~á¶iOæ¬z·vØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?I¥
next reply other threads:[~2008-12-02 20:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-02 20:02 Bartlomiej Zolnierkiewicz [this message]
2008-12-02 20:02 ` [git pull] IDE fixes for 2.6.28-rc7 Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812022102.14690.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.