From: Jean Pihet <jpihet@mvista.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH] OMAP2 OneNAND GPIO fix
Date: Tue, 16 Dec 2008 19:28:48 +0100 [thread overview]
Message-ID: <200812161928.49147.jpihet@mvista.com> (raw)
In-Reply-To: <20081216163702.GQ19551@atomide.com>
[-- Attachment #1: Type: text/plain, Size: 2393 bytes --]
Tony,
> Yeah, should be about to get pulled into Russell's queue, also
> available here:
>
> http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=short
>log;h=hsmmc-init
>
> So Jean, if you can check what still needs to be patched there, and
> we can queue it via omap-fixes.
Here is the patch against the hsmmc-init branch.
The patch changes the include path and the request/free free omap calls to the
standard version.
Regards,
Jean.
From a4f548c3f51c9a349decc761dd539499902873f5 Mon Sep 17 00:00:00 2001
From: Jean Pihet <jpihet@mvista.com>
Date: Tue, 16 Dec 2008 19:22:45 +0100
Subject: [PATCH] ARM: OMAP: use GPIO standard in OneNAND driver
This patch replaces some legacy OMAP GPIO calls with the standard
calls.
Tested on OMAP3 EVM board.
Signed-off-by: Jean Pihet <jpihet@mvista.com>
---
drivers/mtd/onenand/omap2.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index d1e0b8e..f223303 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -34,11 +34,11 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <asm/mach/flash.h>
#include <mach/gpmc.h>
#include <mach/onenand.h>
-#include <mach/gpio.h>
#include <mach/pm.h>
#include <mach/dma.h>
@@ -629,7 +629,8 @@ static int __devinit omap2_onenand_probe(struct
platform_device *pdev)
}
if (c->gpio_irq) {
- if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+ r = gpio_request(c->gpio_irq, "OneNAND Irq");
+ if (r < 0) {
dev_err(&pdev->dev, "Failed to request GPIO%d for "
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
@@ -726,7 +727,7 @@ err_release_dma:
free_irq(gpio_to_irq(c->gpio_irq), c);
err_release_gpio:
if (c->gpio_irq)
- omap_free_gpio(c->gpio_irq);
+ gpio_free(c->gpio_irq);
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
@@ -761,7 +762,7 @@ static int __devexit omap2_onenand_remove(struct
platform_device *pdev)
platform_set_drvdata(pdev, NULL);
if (c->gpio_irq) {
free_irq(gpio_to_irq(c->gpio_irq), c);
- omap_free_gpio(c->gpio_irq);
+ gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
--
1.5.4.4.21.gc4a6c
[-- Attachment #2: ARM-OMAP-use-GPIO-standard-in-OneNAND-driver.patch --]
[-- Type: text/x-diff, Size: 1917 bytes --]
From a4f548c3f51c9a349decc761dd539499902873f5 Mon Sep 17 00:00:00 2001
From: Jean Pihet <jpihet@mvista.com>
Date: Tue, 16 Dec 2008 19:22:45 +0100
Subject: [PATCH] ARM: OMAP: use GPIO standard in OneNAND driver
This patch replaces some legacy OMAP GPIO calls with the standard
calls.
Tested on OMAP3 EVM board.
Signed-off-by: Jean Pihet <jpihet@mvista.com>
---
drivers/mtd/onenand/omap2.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index d1e0b8e..f223303 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -34,11 +34,11 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <asm/mach/flash.h>
#include <mach/gpmc.h>
#include <mach/onenand.h>
-#include <mach/gpio.h>
#include <mach/pm.h>
#include <mach/dma.h>
@@ -629,7 +629,8 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
}
if (c->gpio_irq) {
- if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+ r = gpio_request(c->gpio_irq, "OneNAND Irq");
+ if (r < 0) {
dev_err(&pdev->dev, "Failed to request GPIO%d for "
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
@@ -726,7 +727,7 @@ err_release_dma:
free_irq(gpio_to_irq(c->gpio_irq), c);
err_release_gpio:
if (c->gpio_irq)
- omap_free_gpio(c->gpio_irq);
+ gpio_free(c->gpio_irq);
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
@@ -761,7 +762,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
if (c->gpio_irq) {
free_irq(gpio_to_irq(c->gpio_irq), c);
- omap_free_gpio(c->gpio_irq);
+ gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
--
1.5.4.4.21.gc4a6c
next prev parent reply other threads:[~2008-12-16 18:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-11 16:59 [PATCH] OMAP2 OneNAND GPIO fix Jean Pihet
2008-12-15 23:40 ` Tony Lindgren
2008-12-16 8:19 ` Jean Pihet
2008-12-16 8:39 ` Jarkko Nikula
2008-12-16 16:37 ` Tony Lindgren
2008-12-16 18:28 ` Jean Pihet [this message]
2009-01-08 12:10 ` Tony Lindgren
2009-01-08 12:56 ` Jean Pihet
2009-01-08 13:12 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812161928.49147.jpihet@mvista.com \
--to=jpihet@mvista.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.