All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Jean Pihet <jpihet@mvista.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH] OMAP2 OneNAND GPIO fix
Date: Thu, 8 Jan 2009 15:12:01 +0200	[thread overview]
Message-ID: <20090108131201.GF27566@atomide.com> (raw)
In-Reply-To: <200901081356.54429.jpihet@mvista.com>

* Jean Pihet <jpihet@mvista.com> [090108 14:57]:
> On Thursday 08 January 2009 13:10:37 Tony Lindgren wrote:
> > * Jean Pihet <jpihet@mvista.com> [081216 20:29]:
> > > Tony,
> > >
> > > > Yeah, should be about to get pulled into Russell's queue, also
> > > > available here:
> > > >
> > > > http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=s
> > > >hort log;h=hsmmc-init
> > > >
> > > > So Jean, if you can check what still needs to be patched there, and
> > > > we can queue it via omap-fixes.
> > >
> > > Here is the patch against the hsmmc-init branch.
> > > The patch changes the include path and the request/free free omap calls
> > > to the standard version.
> >
> > Oops, I should have used this patch instead yesterday.. We could add
> > your changes as a clean-up patch later on though once the currently
> > pending stuff gets into mainline. Maybe refresh and resubmit then?
> Ok! When will it hit the mainline?

Hopefully within few days.

Tony


> 
> >
> > Thanks,
> >
> > Tony
> >
> > > Regards,
> > > Jean.
> > >
> > > From a4f548c3f51c9a349decc761dd539499902873f5 Mon Sep 17 00:00:00 2001
> > > From: Jean Pihet <jpihet@mvista.com>
> > > Date: Tue, 16 Dec 2008 19:22:45 +0100
> > > Subject: [PATCH] ARM: OMAP: use GPIO standard in OneNAND driver
> > >
> > > This patch replaces some legacy OMAP GPIO calls with the standard
> > > calls.
> > >
> > > Tested on OMAP3 EVM board.
> > >
> > > Signed-off-by: Jean Pihet <jpihet@mvista.com>
> > > ---
> > >  drivers/mtd/onenand/omap2.c |    9 +++++----
> > >  1 files changed, 5 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
> > > index d1e0b8e..f223303 100644
> > > --- a/drivers/mtd/onenand/omap2.c
> > > +++ b/drivers/mtd/onenand/omap2.c
> > > @@ -34,11 +34,11 @@
> > >  #include <linux/delay.h>
> > >  #include <linux/dma-mapping.h>
> > >  #include <linux/io.h>
> > > +#include <linux/gpio.h>
> > >
> > >  #include <asm/mach/flash.h>
> > >  #include <mach/gpmc.h>
> > >  #include <mach/onenand.h>
> > > -#include <mach/gpio.h>
> > >  #include <mach/pm.h>
> > >
> > >  #include <mach/dma.h>
> > > @@ -629,7 +629,8 @@ static int __devinit omap2_onenand_probe(struct
> > > platform_device *pdev)
> > >  	}
> > >
> > >  	if (c->gpio_irq) {
> > > -		if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
> > > +		r = gpio_request(c->gpio_irq, "OneNAND Irq");
> > > +		if (r < 0) {
> > >  			dev_err(&pdev->dev,  "Failed to request GPIO%d for "
> > >  				"OneNAND\n", c->gpio_irq);
> > >  			goto err_iounmap;
> > > @@ -726,7 +727,7 @@ err_release_dma:
> > >  		free_irq(gpio_to_irq(c->gpio_irq), c);
> > >  err_release_gpio:
> > >  	if (c->gpio_irq)
> > > -		omap_free_gpio(c->gpio_irq);
> > > +		gpio_free(c->gpio_irq);
> > >  err_iounmap:
> > >  	iounmap(c->onenand.base);
> > >  err_release_mem_region:
> > > @@ -761,7 +762,7 @@ static int __devexit omap2_onenand_remove(struct
> > > platform_device *pdev)
> > >  	platform_set_drvdata(pdev, NULL);
> > >  	if (c->gpio_irq) {
> > >  		free_irq(gpio_to_irq(c->gpio_irq), c);
> > > -		omap_free_gpio(c->gpio_irq);
> > > +		gpio_free(c->gpio_irq);
> > >  	}
> > >  	iounmap(c->onenand.base);
> > >  	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
> > > --
> > > 1.5.4.4.21.gc4a6c
> > >
> > > From a4f548c3f51c9a349decc761dd539499902873f5 Mon Sep 17 00:00:00 2001
> > > From: Jean Pihet <jpihet@mvista.com>
> > > Date: Tue, 16 Dec 2008 19:22:45 +0100
> > > Subject: [PATCH] ARM: OMAP: use GPIO standard in OneNAND driver
> > >
> > > This patch replaces some legacy OMAP GPIO calls with the standard
> > > calls.
> > >
> > > Tested on OMAP3 EVM board.
> > >
> > > Signed-off-by: Jean Pihet <jpihet@mvista.com>
> > > ---
> > >  drivers/mtd/onenand/omap2.c |    9 +++++----
> > >  1 files changed, 5 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
> > > index d1e0b8e..f223303 100644
> > > --- a/drivers/mtd/onenand/omap2.c
> > > +++ b/drivers/mtd/onenand/omap2.c
> > > @@ -34,11 +34,11 @@
> > >  #include <linux/delay.h>
> > >  #include <linux/dma-mapping.h>
> > >  #include <linux/io.h>
> > > +#include <linux/gpio.h>
> > >
> > >  #include <asm/mach/flash.h>
> > >  #include <mach/gpmc.h>
> > >  #include <mach/onenand.h>
> > > -#include <mach/gpio.h>
> > >  #include <mach/pm.h>
> > >
> > >  #include <mach/dma.h>
> > > @@ -629,7 +629,8 @@ static int __devinit omap2_onenand_probe(struct
> > > platform_device *pdev) }
> > >
> > >  	if (c->gpio_irq) {
> > > -		if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
> > > +		r = gpio_request(c->gpio_irq, "OneNAND Irq");
> > > +		if (r < 0) {
> > >  			dev_err(&pdev->dev,  "Failed to request GPIO%d for "
> > >  				"OneNAND\n", c->gpio_irq);
> > >  			goto err_iounmap;
> > > @@ -726,7 +727,7 @@ err_release_dma:
> > >  		free_irq(gpio_to_irq(c->gpio_irq), c);
> > >  err_release_gpio:
> > >  	if (c->gpio_irq)
> > > -		omap_free_gpio(c->gpio_irq);
> > > +		gpio_free(c->gpio_irq);
> > >  err_iounmap:
> > >  	iounmap(c->onenand.base);
> > >  err_release_mem_region:
> > > @@ -761,7 +762,7 @@ static int __devexit omap2_onenand_remove(struct
> > > platform_device *pdev) platform_set_drvdata(pdev, NULL);
> > >  	if (c->gpio_irq) {
> > >  		free_irq(gpio_to_irq(c->gpio_irq), c);
> > > -		omap_free_gpio(c->gpio_irq);
> > > +		gpio_free(c->gpio_irq);
> > >  	}
> > >  	iounmap(c->onenand.base);
> > >  	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
> > > --
> > > 1.5.4.4.21.gc4a6c
> 
> 

      reply	other threads:[~2009-01-08 13:12 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-11 16:59 [PATCH] OMAP2 OneNAND GPIO fix Jean Pihet
2008-12-15 23:40 ` Tony Lindgren
2008-12-16  8:19   ` Jean Pihet
2008-12-16  8:39     ` Jarkko Nikula
2008-12-16 16:37       ` Tony Lindgren
2008-12-16 18:28         ` Jean Pihet
2009-01-08 12:10           ` Tony Lindgren
2009-01-08 12:56             ` Jean Pihet
2009-01-08 13:12               ` Tony Lindgren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090108131201.GF27566@atomide.com \
    --to=tony@atomide.com \
    --cc=jpihet@mvista.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.