All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 6/9] ide: remove 'byte' typedef
Date: Tue, 16 Dec 2008 20:32:10 +0100	[thread overview]
Message-ID: <20081216193210.3959.92852.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20081216193137.3959.70339.sendpatchset@localhost.localdomain>

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide: remove 'byte' typedef

Just use u8 instead, also s/__u8/u8/ in ide-cd.h while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.h |   26 +++++++++++++-------------
 drivers/ide/it821x.c |    4 ++--
 drivers/ide/qd65xx.h |    4 ++--
 drivers/ide/sc1200.c |    2 +-
 include/linux/ide.h  |    4 +---
 5 files changed, 19 insertions(+), 21 deletions(-)

Index: b/drivers/ide/ide-cd.h
===================================================================
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -33,33 +33,33 @@
 
 /* Structure of a MSF cdrom address. */
 struct atapi_msf {
-	byte reserved;
-	byte minute;
-	byte second;
-	byte frame;
+	u8 reserved;
+	u8 minute;
+	u8 second;
+	u8 frame;
 };
 
 /* Space to hold the disk TOC. */
 #define MAX_TRACKS 99
 struct atapi_toc_header {
 	unsigned short toc_length;
-	byte first_track;
-	byte last_track;
+	u8 first_track;
+	u8 last_track;
 };
 
 struct atapi_toc_entry {
-	byte reserved1;
+	u8 reserved1;
 #if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 adr     : 4;
-	__u8 control : 4;
+	u8 adr     : 4;
+	u8 control : 4;
 #elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 control : 4;
-	__u8 adr     : 4;
+	u8 control : 4;
+	u8 adr     : 4;
 #else
 #error "Please fix <asm/byteorder.h>"
 #endif
-	byte track;
-	byte reserved2;
+	u8 track;
+	u8 reserved2;
 	union {
 		unsigned lba;
 		struct atapi_msf msf;
Index: b/drivers/ide/it821x.c
===================================================================
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -279,7 +279,7 @@ static void it821x_set_pio_mode(ide_driv
  *	the shared MWDMA/PIO timing register.
  */
 
-static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
+static void it821x_tune_mwdma(ide_drive_t *drive, u8 mode_wanted)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -316,7 +316,7 @@ static void it821x_tune_mwdma (ide_drive
  *	controller when doing UDMA modes in pass through.
  */
 
-static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
+static void it821x_tune_udma(ide_drive_t *drive, u8 mode_wanted)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
Index: b/drivers/ide/qd65xx.h
===================================================================
--- a/drivers/ide/qd65xx.h
+++ b/drivers/ide/qd65xx.h
@@ -31,8 +31,8 @@
 
 #define QD_CONFIG(hwif)		((hwif)->config_data & 0x00ff)
 
-#define QD_TIMING(drive)	(byte)(((drive)->drive_data) & 0x00ff)
-#define QD_TIMREG(drive)	(byte)((((drive)->drive_data) & 0xff00) >> 8)
+#define QD_TIMING(drive)	(u8)(((drive)->drive_data) & 0x00ff)
+#define QD_TIMREG(drive)	(u8)((((drive)->drive_data) & 0xff00) >> 8)
 
 #define QD6500_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0c : 0x08))
 #define QD6580_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0a : 0x00))
Index: b/drivers/ide/sc1200.c
===================================================================
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -171,7 +171,7 @@ static int sc1200_dma_end(ide_drive_t *d
 {
 	ide_hwif_t *hwif = drive->hwif;
 	unsigned long dma_base = hwif->dma_base;
-	byte dma_stat;
+	u8 dma_stat;
 
 	dma_stat = inb(dma_base+2);		/* get DMA status */
 
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -32,8 +32,6 @@
 # define SUPPORT_VLB_SYNC 1
 #endif
 
-typedef unsigned char	byte;	/* used everywhere */
-
 /*
  * Probably not wise to fiddle with these
  */
@@ -1162,7 +1160,7 @@ void ide_pad_transfer(ide_drive_t *, int
 
 ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
 
-ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
+ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
 
 void ide_fix_driveid(u16 *);
 

  parent reply	other threads:[~2008-12-16 19:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-16 19:31 [PATCH 1/9] ide: update ide_unregister() documentation Bartlomiej Zolnierkiewicz
2008-12-16 19:31 ` [PATCH 2/9] ide: move ide_init_port_data() and friends to ide-probe.c Bartlomiej Zolnierkiewicz
2008-12-16 19:31 ` [PATCH 3/9] ide: remove HWIF() macro Bartlomiej Zolnierkiewicz
2008-12-16 19:31 ` [PATCH 4/9] ide: remove local_irq_set() macro Bartlomiej Zolnierkiewicz
2008-12-16 19:32 ` [PATCH 5/9] ide: remove ide_pci_enablebit_t typedef Bartlomiej Zolnierkiewicz
2008-12-19 11:58   ` Sergei Shtylyov
2008-12-16 19:32 ` Bartlomiej Zolnierkiewicz [this message]
2008-12-19 11:54   ` [PATCH 6/9] ide: remove 'byte' typedef Sergei Shtylyov
2008-12-16 19:32 ` [PATCH 7/9] ide: remove ide_driver_t typedef Bartlomiej Zolnierkiewicz
2008-12-16 19:32 ` [PATCH 8/9] ide: unexport ide_wait_not_busy() Bartlomiej Zolnierkiewicz
2008-12-16 19:32 ` [PATCH 9/9] ide: remove ->error method from struct ide_driver Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081216193210.3959.92852.sendpatchset@localhost.localdomain \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.