* S/PDIF-Out on Asus M3A-H/HDMI with ALC1200 @ 2008-12-23 11:22 Thomas Schneider 2008-12-25 4:31 ` Wu Fengguang 0 siblings, 1 reply; 4+ messages in thread From: Thomas Schneider @ 2008-12-23 11:22 UTC (permalink / raw) To: alsa-devel Hi, i am looking for a way to make Digital-Audio work with the external and internal S/PDIF-Output of my Motherboard Asus M3A-H/HDMI with ALC1200 Soundard. I use the latest unstable snapshot and i can´t make it work at the same time. On the external S/PDIF-Output is my Digital Receiver connected, on the internal one my GeForce 8500GT to get sound over HDMI on my LCT-TV. When i load the driver without any model-options my Soundcard is detected as Asus P5Q-EM HDMI ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:2716: hda_codec: model 'asus-p5q' is selected for config 1043:82fe (Asus P5Q-EM HDMI) [ 6.721700] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Headphone Playback Volume, skipped [ 6.721714] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Speaker Playback Volume, skipped [ 6.721716] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Mono Playback Volume, skipped [ 6.721719] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Line-Out Playback Volume, skipped [ 6.721721] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave PCM Playback Volume, skipped [ 6.721729] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Speaker Playback Switch, skipped [ 6.721731] ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot find slave Mono Playback Switch, skipped Now i have sound on my LCD-TV over HDMI (internal S/PDIF-Out) When i load the driver with model=6stack-dig i have sound on my Digital-Receiver (external S/PDIF-Out). In the mailinglist-archive or in the doku i have seen, that the only difference between this models is the DIGOUT_NID asus-p5q = 0x10 6stack-dig = 0x06 I there a way to get both output to work at the same time so i have sound on my LCD-TV and my Digital-Receiver ? Regards Thomas _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: S/PDIF-Out on Asus M3A-H/HDMI with ALC1200 2008-12-23 11:22 S/PDIF-Out on Asus M3A-H/HDMI with ALC1200 Thomas Schneider @ 2008-12-25 4:31 ` Wu Fengguang [not found] ` <49538716.4040401@gmx.net> 0 siblings, 1 reply; 4+ messages in thread From: Wu Fengguang @ 2008-12-25 4:31 UTC (permalink / raw) To: Thomas Schneider; +Cc: alsa-devel Hi Thomas, Could you provide more information by running http://www.alsa-project.org/alsa-info.sh I'm particularity interested in the full dmesg and contents of /proc/asound/card?/*\#? Thanks, Fengguang On Tue, Dec 23, 2008 at 12:22:29PM +0100, Thomas Schneider wrote: > Hi, > > i am looking for a way to make Digital-Audio work with the external > and internal S/PDIF-Output of my Motherboard Asus M3A-H/HDMI with > ALC1200 Soundard. I use the latest unstable snapshot and i can´t > make it work at the same time. > > On the external S/PDIF-Output is my Digital Receiver connected, > on the internal one my GeForce 8500GT to get sound over HDMI > on my LCT-TV. > > When i load the driver without any model-options my Soundcard is > detected as Asus P5Q-EM HDMI > > ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:2716: > hda_codec: model 'asus-p5q' is selected for config 1043:82fe (Asus > P5Q-EM HDMI) > [ 6.721700] ALSA > /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot > find slave Headphone Playback Volume, skipped > [ 6.721714] ALSA > /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot > find slave Speaker Playback Volume, skipped > [ 6.721716] ALSA > /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot > find slave Mono Playback Volume, skipped > [ 6.721719] ALSA > /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot > find slave Line-Out Playback Volume, skipped > [ 6.721721] ALSA > /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot > find slave PCM Playback Volume, skipped > [ 6.721729] ALSA > /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot > find slave Speaker Playback Switch, skipped > [ 6.721731] ALSA > /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot > find slave Mono Playback Switch, skipped > > Now i have sound on my LCD-TV over HDMI (internal S/PDIF-Out) > > When i load the driver with model=6stack-dig i have sound on my > Digital-Receiver (external S/PDIF-Out). > > In the mailinglist-archive or in the doku i have seen, that the only > difference > between this models is the DIGOUT_NID > > asus-p5q = 0x10 > 6stack-dig = 0x06 > > I there a way to get both output to work at the same time so i have > sound on my LCD-TV and my Digital-Receiver ? > > > Regards > > Thomas > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <49538716.4040401@gmx.net>]
* [PATCH] hda - fix name for ALC1200 [not found] ` <49538716.4040401@gmx.net> @ 2008-12-26 4:20 ` Wu Fengguang 2009-01-01 9:37 ` Takashi Iwai 0 siblings, 1 reply; 4+ messages in thread From: Wu Fengguang @ 2008-12-26 4:20 UTC (permalink / raw) To: Thomas Schneider; +Cc: Takashi Iwai, alsa-devel On Thu, Dec 25, 2008 at 03:13:58PM +0200, Thomas Schneider wrote: > Hi, > > here is the output from alsa-info.sh > > http://www.alsa-project.org/db/?f=8282910dc807e1f141896886cd5f8fd574117000 > > I found another small mistake. In the Mixer my Soundcard is shown as "Realtek ALC888". > When i switch this to lines in patch_realtek.c then it is shown as "Realtek ALC1200". > > > static struct hda_codec_preset snd_hda_preset_realtek[] = { > ...... > > { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, > { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200", > .patch = patch_alc883 }, > > ..... Good catch! Reversing the order should fix the name. Thanks, Fengguang --- hda - fix name for ALC1200 Move the more specific preset for ALC1200 above the general one for ALC888, so that it will have the chance to get matched and selected. Reported-by: Thomas Schneider <nailstudio@gmx.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- sound-2.6.orig/sound/pci/hda/patch_realtek.c +++ sound-2.6/sound/pci/hda/patch_realtek.c @@ -16638,9 +16638,9 @@ static struct hda_codec_preset snd_hda_p .patch = patch_alc882 }, /* should be patch_alc883() in future */ { .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 }, { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc883 }, - { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200", .patch = patch_alc883 }, + { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, { .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc883 }, {} /* terminator */ }; ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] hda - fix name for ALC1200 2008-12-26 4:20 ` [PATCH] hda - fix name for ALC1200 Wu Fengguang @ 2009-01-01 9:37 ` Takashi Iwai 0 siblings, 0 replies; 4+ messages in thread From: Takashi Iwai @ 2009-01-01 9:37 UTC (permalink / raw) To: Wu Fengguang; +Cc: alsa-devel, Thomas Schneider At Fri, 26 Dec 2008 12:20:43 +0800, Wu Fengguang wrote: > > On Thu, Dec 25, 2008 at 03:13:58PM +0200, Thomas Schneider wrote: > > Hi, > > > > here is the output from alsa-info.sh > > > > http://www.alsa-project.org/db/?f=8282910dc807e1f141896886cd5f8fd574117000 > > > > I found another small mistake. In the Mixer my Soundcard is shown as "Realtek ALC888". > > When i switch this to lines in patch_realtek.c then it is shown as "Realtek ALC1200". > > > > > > static struct hda_codec_preset snd_hda_preset_realtek[] = { > > ...... > > > > { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, > > { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200", > > .patch = patch_alc883 }, > > > > ..... > > Good catch! > > Reversing the order should fix the name. > > Thanks, > Fengguang > --- > hda - fix name for ALC1200 > > Move the more specific preset for ALC1200 above the general one for > ALC888, so that it will have the chance to get matched and selected. > > Reported-by: Thomas Schneider <nailstudio@gmx.net> > Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Applied. Thanks! Takashi > --- > sound/pci/hda/patch_realtek.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > --- sound-2.6.orig/sound/pci/hda/patch_realtek.c > +++ sound-2.6/sound/pci/hda/patch_realtek.c > @@ -16638,9 +16638,9 @@ static struct hda_codec_preset snd_hda_p > .patch = patch_alc882 }, /* should be patch_alc883() in future */ > { .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 }, > { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc883 }, > - { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, > { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200", > .patch = patch_alc883 }, > + { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 }, > { .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc883 }, > {} /* terminator */ > }; > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-01-01 9:37 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-12-23 11:22 S/PDIF-Out on Asus M3A-H/HDMI with ALC1200 Thomas Schneider
2008-12-25 4:31 ` Wu Fengguang
[not found] ` <49538716.4040401@gmx.net>
2008-12-26 4:20 ` [PATCH] hda - fix name for ALC1200 Wu Fengguang
2009-01-01 9:37 ` Takashi Iwai
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.