From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
linuxppc-dev@ozlabs.org, mel@csn.ul.ie
Subject: [BUG] next-20081231 -powerpc - panic at tasklet_kill_immediate()
Date: Wed, 31 Dec 2008 21:43:41 +0530 [thread overview]
Message-ID: <20081231161341.GD4268@linux.vnet.ibm.com> (raw)
In-Reply-To: <20090101003258.eaa44700.sfr@canb.auug.org.au>
Hi Stephen,
next-20081231 kernel panic's, while booting up on powerpc. This
panic was visible in next-20081230 kernel also.
[ 1.268844] Brought up 2 CPUs
[ 1.268873] Unable to handle kernel paging request for data at address 0x00000009
[ 1.268876] Faulting instruction address: 0xc00000000005a9f8
[ 1.268880] Oops: Kernel access of bad area, sig: 11 [#1]
[ 1.268882] SMP NR_CPUS=32 NUMA PowerMac
[ 1.268886] Modules linked in:
[ 1.268889] NIP: c00000000005a9f8 LR: c00000000006ee54 CTR: c00000000005a9c0
[ 1.268893] REGS: c0000002763c3c80 TRAP: 0300 Not tainted (2.6.28-next-20081231-autokern1)
[ 1.268896] MSR: 9000000000009032 <EE,ME,IR,DR> CR: 24000024 XER: 000fffff
[ 1.268903] DAR: 0000000000000009, DSISR: 0000000040000000
[ 1.268905] TASK = c0000002760e20c0[5] 'ksoftirqd/1' THREAD: c0000002763c0000 CPU: 1
[ 1.268908] GPR00: 0000000000000000 c0000002763c3f00 c0000000004f9088 0000000000000001
[ 1.268913] GPR04: c0000002760e28d0 0000000000000000 0000000024000022 c000000000010098
[ 1.268917] GPR08: 0000000000000000 000000000ec1c518 c000000000514a40 0000000000000010
[ 1.268922] GPR12: c00000000051c700 c00000000051c500 0000000000000000 0000000000000000
[ 1.268926] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 1.268930] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000001400000
[ 1.268934] GPR24: 0000000001829d88 c000000000429b28 0000000001400000 0000000000000000
[ 1.268939] GPR28: c0000002760bfc48 0000000000000001 c000000000498a98 c0000000004b0150
[ 1.268950] NIP [c00000000005a9f8] .tasklet_kill_immediate+0x38/0xb8
[ 1.268955] LR [c00000000006ee54] .kthread+0x78/0xc4
[ 1.268957] Call Trace:
[ 1.268960] [c0000002763c3f00] [c00000000006ee1c] .kthread+0x40/0xc4 (unreliable)
[ 1.268967] [c0000002763c3f90] [c0000000000227a8] .kernel_thread+0x54/0x70
[ 1.268969] Instruction dump:
[ 1.268971] 7c8b07b4 7d693670 7d290194 556b06be e95e8040 7d2907b4 79291f24 e94a0000
[ 1.268977] 7c0a482a 7c005c36 780007e0 0b000000 <e8030008> 7800ffe2 0b000000 e8030008
[ 1.268992] ---[ end trace 31fd0ba7d8756001 ]---
[ 1.269016] Unable to handle kernel paging request for data at address 0x00000000
[ 1.269019] Faulting instruction address: 0xc0000000000d9b4c
[ 1.269022] Oops: Kernel access of bad area, sig: 11 [#2]
[ 1.269024] SMP NR_CPUS=32 NUMA PowerMac
[ 1.269026] Modules linked in:
[ 1.269029] NIP: c0000000000d9b4c LR: c0000000000511fc CTR: 0000000000000003
[ 1.269032] REGS: c0000002763c35d0 TRAP: 0300 Tainted: G D (2.6.28-next-20081231-autokern1)
[ 1.269035] MSR: 9000000000009032 <EE,ME,IR,DR> CR: 28004082 XER: 200fffff
[ 1.269040] DAR: 0000000000000000, DSISR: 0000000040000000
[ 1.269043] TASK = c0000002760e20c0[5] 'ksoftirqd/1' THREAD: c0000002763c0000 CPU: 1
[ 1.269046] GPR00: 0000000000000004 c0000002763c3850 c0000000004f9088 c000000276027d00
[ 1.269051] GPR04: c0000002763b6980 0000000000000000 c000000000457278 c000000000457278
[ 1.269055] GPR08: c0000002760e2290 0000000000000000 c00000000051c500 c0000002763b6080
[ 1.269060] GPR12: 0000000048000084 c00000000051c500 0000000000000000 0000000000000000
[ 1.269064] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 1.269068] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001
[ 1.269073] GPR24: c0000002760e20b0 c0000002760e2228 0000000000000000 c000000276027d00
[ 1.269077] GPR28: 0000000000000000 c0000002763b6980 c00000000049c9b8 0000000000000000
[ 1.269086] NIP [c0000000000d9b4c] .kmem_cache_free+0x1b8/0x244
[ 1.269090] LR [c0000000000511fc] .__cleanup_sighand+0x44/0x5c
[ 1.269092] Call Trace:
[ 1.269095] [c0000002763c3850] [c00000000049abe8] 0xc00000000049abe8 (unreliable)
[ 1.269099] [c0000002763c3900] [c0000000000511fc] .__cleanup_sighand+0x44/0x5c
[ 1.269104] [c0000002763c3980] [c000000000057244] .release_task+0x2dc/0x400
[ 1.269108] [c0000002763c3a20] [c000000000057b14] .do_exit+0x7ac/0x858
[ 1.269112] [c0000002763c3af0] [c000000000020414] .die+0x1c8/0x1cc
[ 1.269117] [c0000002763c3b90] [c000000000027f4c] .bad_page_fault+0xb8/0xd4
[ 1.269122] [c0000002763c3c10] [c000000000005318] handle_page_fault+0x3c/0x5c
[ 1.269128] --- Exception: 300 at .tasklet_kill_immediate+0x38/0xb8
[ 1.269130] LR = .kthread+0x78/0xc4
[ 1.269133] [c0000002763c3f00] [c00000000006ee1c] .kthread+0x40/0xc4 (unreliable)
[ 1.269138] [c0000002763c3f90] [c0000000000227a8] .kernel_thread+0x54/0x70
[ 1.269141] Instruction dump:
[ 1.269142] 4800016d e97d0168 880d01dc 2fa00000 41be0010 7c0004ac 38000000 980d01dc
[ 1.269148] 7c2004ac 38000000 900b0040 48000050 <817f0000> 801f0004 7f8b0040 409c001c
[ 1.269155] ---[ end trace 31fd0ba7d8756001 ]---
[ 1.269157] Fixing recursive fault but reboot is needed!
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
WARNING: multiple messages have this Message-ID (diff)
From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: mel@csn.ul.ie, linuxppc-dev@ozlabs.org,
linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: [BUG] next-20081231 -powerpc - panic at tasklet_kill_immediate()
Date: Wed, 31 Dec 2008 21:43:41 +0530 [thread overview]
Message-ID: <20081231161341.GD4268@linux.vnet.ibm.com> (raw)
In-Reply-To: <20090101003258.eaa44700.sfr@canb.auug.org.au>
Hi Stephen,
next-20081231 kernel panic's, while booting up on powerpc. This
panic was visible in next-20081230 kernel also.
[ 1.268844] Brought up 2 CPUs
[ 1.268873] Unable to handle kernel paging request for data at address 0x00000009
[ 1.268876] Faulting instruction address: 0xc00000000005a9f8
[ 1.268880] Oops: Kernel access of bad area, sig: 11 [#1]
[ 1.268882] SMP NR_CPUS=32 NUMA PowerMac
[ 1.268886] Modules linked in:
[ 1.268889] NIP: c00000000005a9f8 LR: c00000000006ee54 CTR: c00000000005a9c0
[ 1.268893] REGS: c0000002763c3c80 TRAP: 0300 Not tainted (2.6.28-next-20081231-autokern1)
[ 1.268896] MSR: 9000000000009032 <EE,ME,IR,DR> CR: 24000024 XER: 000fffff
[ 1.268903] DAR: 0000000000000009, DSISR: 0000000040000000
[ 1.268905] TASK = c0000002760e20c0[5] 'ksoftirqd/1' THREAD: c0000002763c0000 CPU: 1
[ 1.268908] GPR00: 0000000000000000 c0000002763c3f00 c0000000004f9088 0000000000000001
[ 1.268913] GPR04: c0000002760e28d0 0000000000000000 0000000024000022 c000000000010098
[ 1.268917] GPR08: 0000000000000000 000000000ec1c518 c000000000514a40 0000000000000010
[ 1.268922] GPR12: c00000000051c700 c00000000051c500 0000000000000000 0000000000000000
[ 1.268926] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 1.268930] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000001400000
[ 1.268934] GPR24: 0000000001829d88 c000000000429b28 0000000001400000 0000000000000000
[ 1.268939] GPR28: c0000002760bfc48 0000000000000001 c000000000498a98 c0000000004b0150
[ 1.268950] NIP [c00000000005a9f8] .tasklet_kill_immediate+0x38/0xb8
[ 1.268955] LR [c00000000006ee54] .kthread+0x78/0xc4
[ 1.268957] Call Trace:
[ 1.268960] [c0000002763c3f00] [c00000000006ee1c] .kthread+0x40/0xc4 (unreliable)
[ 1.268967] [c0000002763c3f90] [c0000000000227a8] .kernel_thread+0x54/0x70
[ 1.268969] Instruction dump:
[ 1.268971] 7c8b07b4 7d693670 7d290194 556b06be e95e8040 7d2907b4 79291f24 e94a0000
[ 1.268977] 7c0a482a 7c005c36 780007e0 0b000000 <e8030008> 7800ffe2 0b000000 e8030008
[ 1.268992] ---[ end trace 31fd0ba7d8756001 ]---
[ 1.269016] Unable to handle kernel paging request for data at address 0x00000000
[ 1.269019] Faulting instruction address: 0xc0000000000d9b4c
[ 1.269022] Oops: Kernel access of bad area, sig: 11 [#2]
[ 1.269024] SMP NR_CPUS=32 NUMA PowerMac
[ 1.269026] Modules linked in:
[ 1.269029] NIP: c0000000000d9b4c LR: c0000000000511fc CTR: 0000000000000003
[ 1.269032] REGS: c0000002763c35d0 TRAP: 0300 Tainted: G D (2.6.28-next-20081231-autokern1)
[ 1.269035] MSR: 9000000000009032 <EE,ME,IR,DR> CR: 28004082 XER: 200fffff
[ 1.269040] DAR: 0000000000000000, DSISR: 0000000040000000
[ 1.269043] TASK = c0000002760e20c0[5] 'ksoftirqd/1' THREAD: c0000002763c0000 CPU: 1
[ 1.269046] GPR00: 0000000000000004 c0000002763c3850 c0000000004f9088 c000000276027d00
[ 1.269051] GPR04: c0000002763b6980 0000000000000000 c000000000457278 c000000000457278
[ 1.269055] GPR08: c0000002760e2290 0000000000000000 c00000000051c500 c0000002763b6080
[ 1.269060] GPR12: 0000000048000084 c00000000051c500 0000000000000000 0000000000000000
[ 1.269064] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 1.269068] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001
[ 1.269073] GPR24: c0000002760e20b0 c0000002760e2228 0000000000000000 c000000276027d00
[ 1.269077] GPR28: 0000000000000000 c0000002763b6980 c00000000049c9b8 0000000000000000
[ 1.269086] NIP [c0000000000d9b4c] .kmem_cache_free+0x1b8/0x244
[ 1.269090] LR [c0000000000511fc] .__cleanup_sighand+0x44/0x5c
[ 1.269092] Call Trace:
[ 1.269095] [c0000002763c3850] [c00000000049abe8] 0xc00000000049abe8 (unreliable)
[ 1.269099] [c0000002763c3900] [c0000000000511fc] .__cleanup_sighand+0x44/0x5c
[ 1.269104] [c0000002763c3980] [c000000000057244] .release_task+0x2dc/0x400
[ 1.269108] [c0000002763c3a20] [c000000000057b14] .do_exit+0x7ac/0x858
[ 1.269112] [c0000002763c3af0] [c000000000020414] .die+0x1c8/0x1cc
[ 1.269117] [c0000002763c3b90] [c000000000027f4c] .bad_page_fault+0xb8/0xd4
[ 1.269122] [c0000002763c3c10] [c000000000005318] handle_page_fault+0x3c/0x5c
[ 1.269128] --- Exception: 300 at .tasklet_kill_immediate+0x38/0xb8
[ 1.269130] LR = .kthread+0x78/0xc4
[ 1.269133] [c0000002763c3f00] [c00000000006ee1c] .kthread+0x40/0xc4 (unreliable)
[ 1.269138] [c0000002763c3f90] [c0000000000227a8] .kernel_thread+0x54/0x70
[ 1.269141] Instruction dump:
[ 1.269142] 4800016d e97d0168 880d01dc 2fa00000 41be0010 7c0004ac 38000000 980d01dc
[ 1.269148] 7c2004ac 38000000 900b0040 48000050 <817f0000> 801f0004 7f8b0040 409c001c
[ 1.269155] ---[ end trace 31fd0ba7d8756001 ]---
[ 1.269157] Fixing recursive fault but reboot is needed!
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
next prev parent reply other threads:[~2008-12-31 16:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-31 13:32 linux-next: Tree for December 31 Stephen Rothwell
2008-12-31 16:03 ` [BUG] next-20081231 - S390x kernel panics while bootup at init_sched_build_groups() Kamalesh Babulal
2009-01-02 10:04 ` Heiko Carstens
2008-12-31 16:13 ` Kamalesh Babulal [this message]
2008-12-31 16:13 ` [BUG] next-20081231 -powerpc - panic at tasklet_kill_immediate() Kamalesh Babulal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081231161341.GD4268@linux.vnet.ibm.com \
--to=kamalesh@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=mel@csn.ul.ie \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.