[PATCH 2/2] mn10300: remove <asm/ide.h>

[PATCH 2/2] mn10300: remove <asm/ide.h>

[Bartlomiej Zolnierkiewicz]

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] mn10300: remove <asm/ide.h>

* Remove superfluous <asm/intctl-regs.h> include.

* Remove no longer used SUPPORT_SLOW_DATA_PORTS define.

* Move defining SUPPORT_VLB_SYNC to <linux/ide.h>.

* Use __ide_mm_*() macros from <asm-generic/ide_iops.h>
  (MN10300 uses only memory-mapped I/O).

* Remove <asm/ide.h>.

While at it:

* Remove superfluous SPARC64 #ifdef from <linux/ide.h>.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/asm-mn10300/ide.h |   39 ---------------------------------------
 include/linux/ide.h       |    5 ++---
 2 files changed, 2 insertions(+), 42 deletions(-)

Index: b/include/asm-mn10300/ide.h
===================================================================
--- a/include/asm-mn10300/ide.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* MN10300 Arch-specific IDE code
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-i386/ide.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_IDE_H
-#define _ASM_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/intctl-regs.h>
-
-#undef SUPPORT_SLOW_DATA_PORTS
-#define SUPPORT_SLOW_DATA_PORTS 0
-
-#undef SUPPORT_VLB_SYNC
-#define SUPPORT_VLB_SYNC 0
-
-/*
- * some bits needed for parts of the IDE subsystem to compile
- */
-#define __ide_mm_insw(port, addr, n) \
-	insw((unsigned long) (port), (addr), (n))
-#define __ide_mm_insl(port, addr, n) \
-	insl((unsigned long) (port), (addr), (n))
-#define __ide_mm_outsw(port, addr, n) \
-	outsw((unsigned long) (port), (addr), (n))
-#define __ide_mm_outsl(port, addr, n) \
-	outsl((unsigned long) (port), (addr), (n))
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_IDE_H */
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -26,7 +26,7 @@
 #include <asm/io.h>
 #include <asm/mutex.h>
 
-#if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
+#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
 # define SUPPORT_VLB_SYNC 0
 #else
 # define SUPPORT_VLB_SYNC 1
@@ -194,8 +194,7 @@ static inline void ide_std_init_ports(hw
 }
 
 #if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \
-    defined(CONFIG_MN10300) || defined(CONFIG_PARISC) \
-    || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || defined(CONFIG_SPARC64)
+    defined(CONFIG_PARISC) || defined(CONFIG_PPC) || defined(CONFIG_SPARC)
 #include <asm/ide.h>
 #else
 #include <asm-generic/ide_iops.h>
\0

[PATCH 2/2] mn10300: remove <asm/ide.h>

[Bartlomiej Zolnierkiewicz]

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>Subject: [PATCH] mn10300: remove <asm/ide.h>
* Remove superfluous <asm/intctl-regs.h> include.
* Remove no longer used SUPPORT_SLOW_DATA_PORTS define.
* Move defining SUPPORT_VLB_SYNC to <linux/ide.h>.
* Use __ide_mm_*() macros from <asm-generic/ide_iops.h>  (MN10300 uses only memory-mapped I/O).
* Remove <asm/ide.h>.
While at it:
* Remove superfluous SPARC64 #ifdef from <linux/ide.h>.
Cc: David Howells <dhowells@redhat.com>Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>--- include/asm-mn10300/ide.h |   39 --------------------------------------- include/linux/ide.h       |    5 ++--- 2 files changed, 2 insertions(+), 42 deletions(-)
Index: b/include/asm-mn10300/ide.h===================================================================--- a/include/asm-mn10300/ide.h+++ /dev/null@@ -1,39 +0,0 @@-/* MN10300 Arch-specific IDE code- *- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.- * Written by David Howells (dhowells@redhat.com)- * - Derived from include/asm-i386/ide.h- *- * This program is free software; you can redistribute it and/or- * modify it under the terms of the GNU General Public Licence- * as published by the Free Software Foundation; either version- * 2 of the Licence, or (at your option) any later version.- */--#ifndef _ASM_IDE_H-#define _ASM_IDE_H--#ifdef __KERNEL__--#include <asm/intctl-regs.h>--#undef SUPPORT_SLOW_DATA_PORTS-#define SUPPORT_SLOW_DATA_PORTS 0--#undef SUPPORT_VLB_SYNC-#define SUPPORT_VLB_SYNC 0--/*- * some bits needed for parts of the IDE subsystem to compile- */-#define __ide_mm_insw(port, addr, n) \-	insw((unsigned long) (port), (addr), (n))-#define __ide_mm_insl(port, addr, n) \-	insl((unsigned long) (port), (addr), (n))-#define __ide_mm_outsw(port, addr, n) \-	outsw((unsigned long) (port), (addr), (n))-#define __ide_mm_outsl(port, addr, n) \-	outsl((unsigned long) (port), (addr), (n))--#endif /* __KERNEL__ */-#endif /* _ASM_IDE_H */Index: b/include/linux/ide.h===================================================================--- a/include/linux/ide.h+++ b/include/linux/ide.h@@ -26,7 +26,7 @@ #include <asm/io.h> #include <asm/mutex.h> -#if defined(CONFIG_CRIS) || defined(CONFIG_FRV)+#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300) # define SUPPORT_VLB_SYNC 0 #else # define SUPPORT_VLB_SYNC 1@@ -194,8 +194,7 @@ static inline void ide_std_init_ports(hw }  #if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \-    defined(CONFIG_MN10300) || defined(CONFIG_PARISC) \-    || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || defined(CONFIG_SPARC64)+    defined(CONFIG_PARISC) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) #include <asm/ide.h> #else #include <asm-generic/ide_iops.h>\0ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥