[ath9k-devel] ath9k WMP300nv2 (AR5416)

[Alexander Bartha <alexander.bartha.office.rusz@gmx.at>]

Hello to ath9k developers

i am using:

Distribution: gentoo
Kernel: 2.6.28-r1
Linux-Headers: 2.6.28-r1
Wireless Card: Linksys WMP300n v2 European
Router: Linksys WRT160n


i have tested wmp300nv2 European Version without any luck. I have tried to compile the kernel in that way you told on the the web site(ath9k howto).
At your howto is Networking  --->
  Wireless  --->
    <M> Improved wireless configuration API
    <M> Generic IEEE 802.11 Networking Stack (mac80211) both as Module
when i tried both as module i cant load mac80211 or cfg80211 so ath9k fails also. 
One time i get it to work (with kernel 2.6.27-r7) (cfg80211 and mac80211 directly in the kernel not as module) but with only 8MB/sec Bandwith and channel 12 and 13 was not able to access. I need channel 12 or 13 cause in the neibourhood are much wireless routers and none of this routers uses channel 12 or 13 so at these channels i get the stablest and speedest network.
Please can you help me with a working kernel config an tell me which packeges i have to install that my linksys wmp300nv2 card could work at 80211N 130MB/sec with support for all channel inkluding channel 12 and 13. 
Sorry for these ugly english. Sorry for these mail but i tried many times to build my kernel without any luck on the linksys card. I have attached my kernel config.
Thanks for helping.
-- 
Psssst! Schon vom neuen GMX MultiMessenger geh?rt? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config-2.6.28-r1-6
Type: application/octet-stream
Size: 58194 bytes
Desc: not available
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090124/e76cb864/attachment-0001.obj