All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wu Fengguang <fengguang.wu@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, Thomas Schneider <nailstudio@gmx.net>
Subject: [PATCH] enable concurrent digital outputs for ALC1200
Date: Fri, 6 Feb 2009 15:02:27 +0800	[thread overview]
Message-ID: <20090206070227.GA17793@localhost> (raw)
In-Reply-To: <495FEA39.1000404@gmx.net>

Add the SPDIF pin as slave digital out to enable concurrent
HDMI/SPDIF outputs for ASUS M3A-H/HDMI with ALC1200 codec.

Tested-by: Thomas Schneider <nailstudio@gmx.net>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
 sound/pci/hda/hda_local.h     |    1 +
 sound/pci/hda/patch_realtek.c |    8 ++++++++
 2 files changed, 9 insertions(+)

--- sound-2.6.orig/sound/pci/hda/hda_local.h
+++ sound-2.6/sound/pci/hda/hda_local.h
@@ -229,6 +229,7 @@ struct hda_multi_out {
 	hda_nid_t hp_nid;	/* optional DAC for HP, 0 when not exists */
 	hda_nid_t extra_out_nid[3];	/* optional DACs, 0 when not exists */
 	hda_nid_t dig_out_nid;	/* digital out audio widget */
+	hda_nid_t *slave_dig_outs;
 	int max_channels;	/* currently supported analog channels */
 	int dig_out_used;	/* current usage of digital out (HDA_DIG_XXX) */
 	int no_share_stream;	/* don't share a stream with multiple pins */
--- sound-2.6.orig/sound/pci/hda/patch_realtek.c
+++ sound-2.6/sound/pci/hda/patch_realtek.c
@@ -349,6 +349,7 @@ struct alc_config_preset {
 	hda_nid_t *dac_nids;
 	hda_nid_t dig_out_nid;		/* optional */
 	hda_nid_t hp_nid;		/* optional */
+	hda_nid_t *slave_dig_outs;
 	unsigned int num_adc_nids;
 	hda_nid_t *adc_nids;
 	hda_nid_t *capsrc_nids;
@@ -824,6 +825,7 @@ static void setup_preset(struct alc_spec
 	spec->multiout.num_dacs = preset->num_dacs;
 	spec->multiout.dac_nids = preset->dac_nids;
 	spec->multiout.dig_out_nid = preset->dig_out_nid;
+	spec->multiout.slave_dig_outs = preset->slave_dig_outs;
 	spec->multiout.hp_nid = preset->hp_nid;
 
 	spec->num_mux_defs = preset->num_mux_defs;
@@ -3107,6 +3109,7 @@ static int alc_build_pcms(struct hda_cod
 	/* SPDIF for stream index #1 */
 	if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
 		codec->num_pcms = 2;
+	        codec->slave_dig_outs = spec->multiout.slave_dig_outs;
 		info = spec->pcm_rec + 1;
 		info->name = spec->stream_name_digital;
 		if (spec->dig_out_type)
@@ -8603,6 +8606,10 @@ static struct snd_pci_quirk alc883_cfg_t
 	{}
 };
 
+static hda_nid_t alc1200_slave_dig_outs[] = {
+	ALC883_DIGOUT_NID, 0,
+};
+
 static struct alc_config_preset alc883_presets[] = {
 	[ALC883_3ST_2ch_DIG] = {
 		.mixers = { alc883_3ST_2ch_mixer },
@@ -8943,6 +8950,7 @@ static struct alc_config_preset alc883_p
 		.dac_nids = alc883_dac_nids,
 		.dig_out_nid = ALC1200_DIGOUT_NID,
 		.dig_in_nid = ALC883_DIGIN_NID,
+		.slave_dig_outs = alc1200_slave_dig_outs,
 		.num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
 		.channel_mode = alc883_sixstack_modes,
 		.input_mux = &alc883_capture_source,

  reply	other threads:[~2009-02-06  7:02 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-25 13:26 S/PDIF-Out on Asus M3A-H/HDMI with ALC1200] Thomas Schneider
2008-12-26  2:48 ` Wu Fengguang
2008-12-26 12:29   ` Thomas Schneider
2008-12-30  9:54     ` Wu Fengguang
2009-01-03 22:44       ` Thomas Schneider
2009-02-06  7:02         ` Wu Fengguang [this message]
2009-02-06  8:01           ` [PATCH] enable concurrent digital outputs for ALC1200 Takashi Iwai
2009-02-06  8:13             ` Wu Fengguang
2009-02-06  8:23               ` Takashi Iwai
2009-02-06  8:40                 ` Wu Fengguang
2009-02-06  8:26           ` Takashi Iwai
2009-02-06  8:30             ` Wu Fengguang
2009-02-06  8:41               ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090206070227.GA17793@localhost \
    --to=fengguang.wu@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=nailstudio@gmx.net \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.