From: Thomas Schneider <nailstudio@gmx.net>
To: alsa-devel@alsa-project.org
Subject: Re: S/PDIF-Out on Asus M3A-H/HDMI with ALC1200]
Date: Fri, 26 Dec 2008 13:29:30 +0100 [thread overview]
Message-ID: <4954CE2A.2040309@gmx.net> (raw)
In-Reply-To: <20081226024838.GA13302@localhost>
Hi,
sorry, i get a kernel oops with this changes when i activate iec958 in
the mixer !
[ 1435.041914] BUG: unable to handle kernel NULL pointer dereference at
0000000000000006
[ 1435.041914] IP: [<ffffffff880d0223>] :snd_hda_codec:set_dig_out+0x47/0x57
[ 1435.041914] PGD 6b5c3067 PUD 781ba067 PMD 0
[ 1435.041914] Oops: 0000 [1] SMP
[ 1435.041914] CPU 1
[ 1435.041914] Modules linked in: snd_pcm_oss snd_mixer_oss
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm
snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_timer
snd_seq_device snd soundcore snd_page_alloc lirc_serial lirc_dev mantis
mb86a16 stb6100 stb0899 b2c2_flexcop_pci b2c2_flexcop s5h1420 mt352
itd1000 bcm3510 dvb_pll nxt200x isl6421 tuner_simple tuner_types cx24123
lgdt330x mt312 v4l2_common dvb_ttpci lnbp21 l64781 saa7146_vv saa7146
videobuf_dma_sg videobuf_core ves1820 tda8083 sp8870 firmware_class
stv0297 ves1x93 ttpci_eeprom stv0299 dvb_core videodev v4l1_compat
nvidia(P) battery ppdev parport_pc lp parport ipv6 cpufreq_ondemand
cpufreq_conservative cpufreq_userspace nls_iso8859_1 nls_cp437 joydev
usb_storage usbhid hid serio_raw pcspkr psmouse evdev i2c_piix4 k8temp
atl1 i2c_core mii ehci_hcd ohci_hcd wmi button [last unloaded: soundcore]
[ 1435.041914] Pid: 17229, comm: alsamixer Tainted: P 2.6.25.16 #5
[ 1435.041914] RIP: 0010:[<ffffffff880d0223>] [<ffffffff880d0223>]
:snd_hda_codec:set_dig_out+0x47/0x57
[ 1435.041914] RSP: 0018:ffff81006f86fcb8 EFLAGS: 00010206
[ 1435.041914] RAX: 0000000000000000 RBX: 0000000000000006 RCX:
0000000000000010
[ 1435.041914] RDX: 0000000000000001 RSI: ffff81007cd1f1f0 RDI:
ffff81007dc05828
[ 1435.041914] RBP: ffff81007dc05828 R08: 0000000000000001 R09:
0000000000200200
[ 1435.041914] R10: ffff81007cd1f208 R11: ffffffff880d08ae R12:
0000000000000001
[ 1435.041914] R13: 000000000000070d R14: 0000000000000001 R15:
ffff81007dc05a30
[ 1435.041914] FS: 00007faf065546e0(0000) GS:ffff81007fb7fbc0(0000)
knlGS:0000000000000000
[ 1435.041914] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1435.041914] CR2: 0000000000000006 CR3: 000000006f849000 CR4:
00000000000006e0
[ 1435.041914] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1435.041914] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 1435.041914] Process alsamixer (pid: 17229, threadinfo
ffff81006f86e000, task ffff81007e7395c0)
[ 1435.041914] Stack: ffff81006f86fcd8 0000000000000010
ffff81007dc05828 0000000000000010
[ 1435.041914] 0000000000000001 ffffffff880d0926 ffff81007ccd2028
ffff81007c89e2e8
[ 1435.041914] ffff81007ccd2028 ffff81007dc049c0 ffff81007dc04828
ffff81007c89e2e8
[ 1435.041914] Call Trace:
[ 1435.041914] [<ffffffff880d0926>] ?
:snd_hda_codec:snd_hda_spdif_out_switch_put+0x78/0xe4
[ 1435.041914] [<ffffffff8806f184>] ? :snd:snd_ctl_elem_write+0x9c/0xdb
[ 1435.041914] [<ffffffff8806fc16>] ? :snd:snd_ctl_ioctl+0x2d3/0x770
[ 1435.041914] [<ffffffff8024be32>] ? hrtimer_start+0x115/0x137
[ 1435.041914] [<ffffffff8020bef9>] ? sysret_signal+0x2b/0x45
[ 1435.041914] [<ffffffff802341e5>] ? hrtick_set+0xa1/0x10a
[ 1435.041914] [<ffffffff8020b95a>] ? do_notify_resume+0x850/0x871
[ 1435.041914] [<ffffffff8022f636>] ? __wake_up+0x38/0x4f
[ 1435.041914] [<ffffffff8023b7d6>] ? current_fs_time+0x1e/0x24
[ 1435.041914] [<ffffffff802ab23d>] ? vfs_ioctl+0x21/0x6c
[ 1435.041914] [<ffffffff802ab4c1>] ? do_vfs_ioctl+0x239/0x24f
[ 1435.041914] [<ffffffff802a061f>] ? vfs_read+0x11e/0x152
[ 1435.041914] [<ffffffff802ab528>] ? sys_ioctl+0x51/0x71
[ 1435.041914] [<ffffffff8020bef9>] ? sysret_signal+0x2b/0x45
[ 1435.041914] [<ffffffff8020be4a>] ? system_call_after_swapgs+0x8a/0x8f
[ 1435.041914]
[ 1435.041914]
[ 1435.041914] Code: 08 e8 36 ff ff ff 48 8b 9d 30 02 00 00 48 85 db 75
19 eb 1f 0f b7 f0 45 89 e0 44 89 e9 31 d2 48 89 ef 48 83 c3 02 e8 11 ff
ff ff <66> 8b 03 66 85 c0 75 e1 5b 5b 5d 41 5c 41 5d c3 41 57 41 56 41
[ 1435.041914] RIP [<ffffffff880d0223>]
:snd_hda_codec:set_dig_out+0x47/0x57
[ 1435.041914] RSP <ffff81006f86fcb8>
[ 1435.041914] CR2: 0000000000000006
[ 1435.041930] ---[ end trace 9b9cd1aadfad1315 ]---
Thomas
Am 26.12.2008 03:48, schrieb Wu Fengguang:
> Hi Thomas,
>
> This patch adds the SPDIF pin as slave digital out which I hope to
> create concurrent HDMI/SPDIF outputs for you.
>
> It's against today's sound-2.6 git tree.
>
> Thanks,
> Fengguang
> ---
> diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
> index 6f2fe0f..c9262f0 100644
> --- a/sound/pci/hda/hda_local.h
> +++ b/sound/pci/hda/hda_local.h
> @@ -227,6 +227,7 @@ struct hda_multi_out {
> hda_nid_t hp_nid; /* optional DAC for HP, 0 when not exists */
> hda_nid_t extra_out_nid[3]; /* optional DACs, 0 when not exists */
> hda_nid_t dig_out_nid; /* digital out audio widget */
> + hda_nid_t *slave_dig_outs;
> int max_channels; /* currently supported analog channels */
> int dig_out_used; /* current usage of digital out (HDA_DIG_XXX) */
> int no_share_stream; /* don't share a stream with multiple pins */
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index 0bd4e6b..08bedee 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -336,6 +336,7 @@ struct alc_config_preset {
> hda_nid_t *dac_nids;
> hda_nid_t dig_out_nid; /* optional */
> hda_nid_t hp_nid; /* optional */
> + hda_nid_t *slave_dig_outs;
> unsigned int num_adc_nids;
> hda_nid_t *adc_nids;
> hda_nid_t *capsrc_nids;
> @@ -810,6 +811,7 @@ static void setup_preset(struct alc_spec *spec,
> spec->multiout.num_dacs = preset->num_dacs;
> spec->multiout.dac_nids = preset->dac_nids;
> spec->multiout.dig_out_nid = preset->dig_out_nid;
> + spec->multiout.slave_dig_outs = preset->slave_dig_outs;
> spec->multiout.hp_nid = preset->hp_nid;
>
> spec->num_mux_defs = preset->num_mux_defs;
> @@ -3085,6 +3087,7 @@ static int alc_build_pcms(struct hda_codec *codec)
> /* SPDIF for stream index #1 */
> if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
> codec->num_pcms = 2;
> + codec->slave_dig_outs = spec->multiout.slave_dig_outs;
> info = spec->pcm_rec + 1;
> info->name = spec->stream_name_digital;
> info->pcm_type = HDA_PCM_TYPE_SPDIF;
> @@ -8865,6 +8868,7 @@ static struct alc_config_preset alc883_presets[] = {
> .dac_nids = alc883_dac_nids,
> .dig_out_nid = ALC1200_DIGOUT_NID,
> .dig_in_nid = ALC883_DIGIN_NID,
> + .slave_dig_outs = { ALC883_DIGOUT_NID, 0 },
> .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
> .channel_mode = alc883_sixstack_modes,
> .input_mux =&alc883_capture_source,
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
>
next prev parent reply other threads:[~2008-12-26 12:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-25 13:26 S/PDIF-Out on Asus M3A-H/HDMI with ALC1200] Thomas Schneider
2008-12-26 2:48 ` Wu Fengguang
2008-12-26 12:29 ` Thomas Schneider [this message]
2008-12-30 9:54 ` Wu Fengguang
2009-01-03 22:44 ` Thomas Schneider
2009-02-06 7:02 ` [PATCH] enable concurrent digital outputs for ALC1200 Wu Fengguang
2009-02-06 8:01 ` Takashi Iwai
2009-02-06 8:13 ` Wu Fengguang
2009-02-06 8:23 ` Takashi Iwai
2009-02-06 8:40 ` Wu Fengguang
2009-02-06 8:26 ` Takashi Iwai
2009-02-06 8:30 ` Wu Fengguang
2009-02-06 8:41 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4954CE2A.2040309@gmx.net \
--to=nailstudio@gmx.net \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.