All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Borislav Petkov <petkovbb@gmail.com>,
	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/6] ide: pass command to ide_map_sg()
Date: Tue, 10 Feb 2009 00:19:52 +0100	[thread overview]
Message-ID: <20090209231952.32406.58013.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090209231945.32406.14874.sendpatchset@localhost.localdomain>

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide: pass command to ide_map_sg()

* Set IDE_TFLAG_WRITE flag and ->rq also for ATA_CMD_PACKET
  commands.

* Pass command to ->dma_setup method and update all its
  implementations accordingly.

* Pass command instead of request to ide_build_sglist(),
  *_build_dmatable() and ide_map_sg().

While at it:

* Fix scc_dma_setup() documentation + use ATA_DMA_WR define.

* Rename sgiioc4_build_dma_table() to sgiioc4_build_dmatable(),
  change return value type to 'int' and drop unused 'ddir'
  argument.

* Do some minor cleanups in [tx4939]ide_dma_setup().

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/alim15x3.c     |    7 ++++---
 drivers/ide/au1xxx-ide.c   |   15 ++++++---------
 drivers/ide/icside.c       |    7 +++----
 drivers/ide/ide-atapi.c    |   16 ++++++++++++----
 drivers/ide/ide-disk.c     |   10 +++++-----
 drivers/ide/ide-dma-sff.c  |   18 +++++++++---------
 drivers/ide/ide-dma.c      |   15 +++++++--------
 drivers/ide/ide-floppy.c   |    6 +++++-
 drivers/ide/ide-io.c       |    6 +++---
 drivers/ide/ide-taskfile.c |    4 ++--
 drivers/ide/ns87415.c      |    4 ++--
 drivers/ide/pmac.c         |   19 ++++++++-----------
 drivers/ide/scc_pata.c     |   19 +++++++------------
 drivers/ide/sgiioc4.c      |   21 +++++++--------------
 drivers/ide/trm290.c       |   10 +++++-----
 drivers/ide/tx4939ide.c    |   26 ++++++++++----------------
 include/linux/ide.h        |   12 ++++++------
 17 files changed, 101 insertions(+), 114 deletions(-)

Index: b/drivers/ide/alim15x3.c
===================================================================
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -191,17 +191,18 @@ static void ali_set_dma_mode(ide_drive_t
 /**
  *	ali15x3_dma_setup	-	begin a DMA phase
  *	@drive:	target device
+ *	@cmd: command
  *
  *	Returns 1 if the DMA cannot be performed, zero on success.
  */
 
-static int ali15x3_dma_setup(ide_drive_t *drive)
+static int ali15x3_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	if (m5229_revision < 0xC2 && drive->media != ide_disk) {
-		if (rq_data_dir(drive->hwif->rq))
+		if (cmd->tf_flags & IDE_TFLAG_WRITE)
 			return 1;	/* try PIO instead of DMA */
 	}
-	return ide_dma_setup(drive);
+	return ide_dma_setup(drive, cmd);
 }
 
 /**
Index: b/drivers/ide/au1xxx-ide.c
===================================================================
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -209,15 +209,14 @@ static void auide_set_dma_mode(ide_drive
  */
 
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-static int auide_build_dmatable(ide_drive_t *drive)
+static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = hwif->rq;
 	_auide_hwif *ahwif = &auide_hwif;
 	struct scatterlist *sg;
-	int i = hwif->cmd.sg_nents, iswrite, count = 0;
+	int i = cmd->sg_nents, count = 0;
+	int iswrite = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
 
-	iswrite = (rq_data_dir(rq) == WRITE);
 	/* Save for interrupt context */
 	ahwif->drive = drive;
 
@@ -298,12 +297,10 @@ static void auide_dma_exec_cmd(ide_drive
 			    (2*WAIT_CMD), NULL);
 }
 
-static int auide_dma_setup(ide_drive_t *drive)
+static int auide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
-	struct request *rq = drive->hwif->rq;
-
-	if (!auide_build_dmatable(drive)) {
-		ide_map_sg(drive, rq);
+	if (auide_build_dmatable(drive, cmd) == 0) {
+		ide_map_sg(drive, cmd);
 		return 1;
 	}
 
Index: b/drivers/ide/icside.c
===================================================================
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -307,15 +307,14 @@ static void icside_dma_start(ide_drive_t
 	enable_dma(ec->dma);
 }
 
-static int icside_dma_setup(ide_drive_t *drive)
+static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct expansion_card *ec = ECARD_DEV(hwif->dev);
 	struct icside_state *state = ecard_get_drvdata(ec);
-	struct request *rq = hwif->rq;
 	unsigned int dma_mode;
 
-	if (rq_data_dir(rq))
+	if (cmd->tf_flags & IDE_TFLAG_WRITE)
 		dma_mode = DMA_MODE_WRITE;
 	else
 		dma_mode = DMA_MODE_READ;
@@ -344,7 +343,7 @@ static int icside_dma_setup(ide_drive_t 
 	 * Tell the DMA engine about the SG table and
 	 * data direction.
 	 */
-	set_dma_sg(ec->dma, hwif->sg_table, hwif->cmd.sg_nents);
+	set_dma_sg(ec->dma, hwif->sg_table, cmd->sg_nents);
 	set_dma_mode(ec->dma, dma_mode);
 
 	drive->waiting_for_dma = 1;
Index: b/drivers/ide/ide-atapi.c
===================================================================
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -626,12 +626,20 @@ ide_startstop_t ide_issue_pc(ide_drive_t
 {
 	struct ide_atapi_pc *pc;
 	ide_hwif_t *hwif = drive->hwif;
+	const struct ide_dma_ops *dma_ops = hwif->dma_ops;
+	struct ide_cmd *cmd = &hwif->cmd;
 	ide_expiry_t *expiry = NULL;
 	struct request *rq = hwif->rq;
 	unsigned int timeout;
 	u32 tf_flags;
 	u16 bcount;
 
+	if (drive->media != ide_floppy) {
+		if (rq_data_dir(rq))
+			cmd->tf_flags |= IDE_TFLAG_WRITE;
+		cmd->rq = rq;
+	}
+
 	if (dev_is_idecd(drive)) {
 		tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
 		bcount = ide_cd_get_xferlen(rq);
@@ -639,8 +647,8 @@ ide_startstop_t ide_issue_pc(ide_drive_t
 		timeout = ATAPI_WAIT_PC;
 
 		if (drive->dma) {
-			if (ide_build_sglist(drive, rq))
-				drive->dma = !hwif->dma_ops->dma_setup(drive);
+			if (ide_build_sglist(drive, cmd))
+				drive->dma = !dma_ops->dma_setup(drive, cmd);
 			else
 				drive->dma = 0;
 		}
@@ -663,8 +671,8 @@ ide_startstop_t ide_issue_pc(ide_drive_t
 
 		if ((pc->flags & PC_FLAG_DMA_OK) &&
 		     (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
-			if (ide_build_sglist(drive, rq))
-				drive->dma = !hwif->dma_ops->dma_setup(drive);
+			if (ide_build_sglist(drive, cmd))
+				drive->dma = !dma_ops->dma_setup(drive, cmd);
 			else
 				drive->dma = 0;
 		}
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -99,11 +99,6 @@ static ide_startstop_t __ide_do_rw_disk(
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
 
-	if (dma == 0) {
-		ide_init_sg_cmd(&cmd, nsectors);
-		ide_map_sg(drive, rq);
-	}
-
 	if (drive->dev_flags & IDE_DFLAG_LBA) {
 		if (lba48) {
 			pr_debug("%s: LBA=0x%012llx\n", drive->name,
@@ -156,6 +151,11 @@ static ide_startstop_t __ide_do_rw_disk(
 	ide_tf_set_cmd(drive, &cmd, dma);
 	cmd.rq = rq;
 
+	if (dma == 0) {
+		ide_init_sg_cmd(&cmd, nsectors);
+		ide_map_sg(drive, &cmd);
+	}
+
 	rc = do_rw_taskfile(drive, &cmd);
 
 	if (rc == ide_stopped && dma) {
Index: b/drivers/ide/ide-dma-sff.c
===================================================================
--- a/drivers/ide/ide-dma-sff.c
+++ b/drivers/ide/ide-dma-sff.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL_GPL(ide_dma_host_set);
  *	May also be invoked from trm290.c
  */
 
-int ide_build_dmatable(ide_drive_t *drive, struct request *rq)
+int ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	__le32 *table = (__le32 *)hwif->dmatable_cpu;
@@ -120,7 +120,7 @@ int ide_build_dmatable(ide_drive_t *driv
 	struct scatterlist *sg;
 	u8 is_trm290 = !!(hwif->host_flags & IDE_HFLAG_TRM290);
 
-	for_each_sg(hwif->sg_table, sg, hwif->cmd.sg_nents, i) {
+	for_each_sg(hwif->sg_table, sg, cmd->sg_nents, i) {
 		u32 cur_addr, cur_len, xcount, bcount;
 
 		cur_addr = sg_dma_address(sg);
@@ -175,6 +175,7 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable);
 /**
  *	ide_dma_setup	-	begin a DMA phase
  *	@drive: target device
+ *	@cmd: command
  *
  *	Build an IDE DMA PRD (IDE speak for scatter gather table)
  *	and then set up the DMA transfer registers for a device
@@ -185,17 +186,16 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable);
  *	is returned.
  */
 
-int ide_dma_setup(ide_drive_t *drive)
+int ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = hwif->rq;
-	unsigned int reading = rq_data_dir(rq) ? 0 : ATA_DMA_WR;
 	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+	u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
 	u8 dma_stat;
 
 	/* fall back to pio! */
-	if (!ide_build_dmatable(drive, rq)) {
-		ide_map_sg(drive, rq);
+	if (ide_build_dmatable(drive, cmd) == 0) {
+		ide_map_sg(drive, cmd);
 		return 1;
 	}
 
@@ -208,9 +208,9 @@ int ide_dma_setup(ide_drive_t *drive)
 
 	/* specify r/w */
 	if (mmio)
-		writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+		writeb(rw, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
 	else
-		outb(reading, hwif->dma_base + ATA_DMA_CMD);
+		outb(rw, hwif->dma_base + ATA_DMA_CMD);
 
 	/* read DMA status for INTR & ERROR flags */
 	dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
Index: b/drivers/ide/ide-dma.c
===================================================================
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -120,7 +120,7 @@ int ide_dma_good_drive(ide_drive_t *driv
 /**
  *	ide_build_sglist	-	map IDE scatter gather for DMA I/O
  *	@drive: the drive to build the DMA table for
- *	@rq: the request holding the sg list
+ *	@cmd: command
  *
  *	Perform the DMA mapping magic necessary to access the source or
  *	target buffers of a request via DMA.  The lower layers of the
@@ -128,23 +128,22 @@ int ide_dma_good_drive(ide_drive_t *driv
  *	operate in a portable fashion.
  */
 
-int ide_build_sglist(ide_drive_t *drive, struct request *rq)
+int ide_build_sglist(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
-	struct ide_cmd *cmd = &hwif->cmd;
 	int i;
 
-	ide_map_sg(drive, rq);
+	ide_map_sg(drive, cmd);
 
-	if (rq_data_dir(rq) == READ)
-		cmd->sg_dma_direction = DMA_FROM_DEVICE;
-	else
+	if (cmd->tf_flags & IDE_TFLAG_WRITE)
 		cmd->sg_dma_direction = DMA_TO_DEVICE;
+	else
+		cmd->sg_dma_direction = DMA_FROM_DEVICE;
 
 	i = dma_map_sg(hwif->dev, sg, cmd->sg_nents, cmd->sg_dma_direction);
 	if (i == 0)
-		ide_map_sg(drive, rq);
+		ide_map_sg(drive, cmd);
 
 	return i;
 }
Index: b/drivers/ide/ide-floppy.c
===================================================================
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -285,8 +285,12 @@ static ide_startstop_t ide_floppy_do_req
 		goto out_end;
 	}
 
+	if (rq_data_dir(rq))
+		cmd->tf_flags |= IDE_TFLAG_WRITE;
+	cmd->rq = rq;
+
 	ide_init_sg_cmd(cmd, rq->nr_sectors);
-	ide_map_sg(drive, rq);
+	ide_map_sg(drive, cmd);
 
 	pc->sg = hwif->sg_table;
 	pc->sg_cnt = cmd->sg_nents;
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -224,11 +224,11 @@ static ide_startstop_t do_special (ide_d
 	return ide_stopped;
 }
 
-void ide_map_sg(ide_drive_t *drive, struct request *rq)
+void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct ide_cmd *cmd = &hwif->cmd;
 	struct scatterlist *sg = hwif->sg_table;
+	struct request *rq = cmd->rq;
 
 	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
 		sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
@@ -269,7 +269,7 @@ static ide_startstop_t execute_drive_cmd
 	if (cmd) {
 		if (cmd->protocol == ATA_PROT_PIO) {
 			ide_init_sg_cmd(cmd, rq->nr_sectors);
-			ide_map_sg(drive, rq);
+			ide_map_sg(drive, cmd);
 		}
 
 		return do_rw_taskfile(drive, cmd);
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -102,8 +102,8 @@ ide_startstop_t do_rw_taskfile(ide_drive
 		return ide_started;
 	default:
 		if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 ||
-		    ide_build_sglist(drive, hwif->rq) == 0 ||
-		    dma_ops->dma_setup(drive))
+		    ide_build_sglist(drive, cmd) == 0 ||
+		    dma_ops->dma_setup(drive, cmd))
 			return ide_stopped;
 		dma_ops->dma_exec_cmd(drive, tf->command);
 		dma_ops->dma_start(drive);
Index: b/drivers/ide/ns87415.c
===================================================================
--- a/drivers/ide/ns87415.c
+++ b/drivers/ide/ns87415.c
@@ -216,11 +216,11 @@ static int ns87415_dma_end(ide_drive_t *
 	return (dma_stat & 7) != 4;
 }
 
-static int ns87415_dma_setup(ide_drive_t *drive)
+static int ns87415_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	/* select DMA xfer */
 	ns87415_prepare_drive(drive, 1);
-	if (!ide_dma_setup(drive))
+	if (ide_dma_setup(drive, cmd) == 0)
 		return 0;
 	/* DMA failed: select PIO xfer */
 	ns87415_prepare_drive(drive, 0);
Index: b/drivers/ide/pmac.c
===================================================================
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -404,7 +404,6 @@ kauai_lookup_timing(struct kauai_timing*
 #define IDE_WAKEUP_DELAY	(1*HZ)
 
 static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *);
-static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
 static void pmac_ide_selectproc(ide_drive_t *drive);
 static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
 
@@ -1422,8 +1421,7 @@ out:
  * pmac_ide_build_dmatable builds the DBDMA command list
  * for a transfer and sets the DBDMA channel to point to it.
  */
-static int
-pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq)
+static int pmac_ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	pmac_ide_hwif_t *pmif =
@@ -1431,8 +1429,8 @@ pmac_ide_build_dmatable(ide_drive_t *dri
 	struct dbdma_cmd *table;
 	volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
 	struct scatterlist *sg;
-	int wr = (rq_data_dir(rq) == WRITE);
-	int i = hwif->cmd.sg_nents, count = 0;
+	int wr = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
+	int i = cmd->sg_nents, count = 0;
 
 	/* DMA table is already aligned */
 	table = (struct dbdma_cmd *) pmif->dma_table_cpu;
@@ -1504,23 +1502,22 @@ use_pio_instead:
  * Prepare a DMA transfer. We build the DMA table, adjust the timings for
  * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
  */
-static int
-pmac_ide_dma_setup(ide_drive_t *drive)
+static int pmac_ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	pmac_ide_hwif_t *pmif =
 		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
-	struct request *rq = hwif->rq;
 	u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4);
+	u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
 
-	if (!pmac_ide_build_dmatable(drive, rq)) {
-		ide_map_sg(drive, rq);
+	if (pmac_ide_build_dmatable(drive, cmd) == 0) {
+		ide_map_sg(drive, cmd);
 		return 1;
 	}
 
 	/* Apple adds 60ns to wrDataSetup on reads */
 	if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) {
-		writel(pmif->timings[unit] + (!rq_data_dir(rq) ? 0x00800000UL : 0),
+		writel(pmif->timings[unit] + (write ? 0 : 0x00800000UL),
 			PMAC_IDE_REG(IDE_TIMING_CONFIG));
 		(void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
 	}
Index: b/drivers/ide/scc_pata.c
===================================================================
--- a/drivers/ide/scc_pata.c
+++ b/drivers/ide/scc_pata.c
@@ -303,8 +303,9 @@ static void scc_dma_host_set(ide_drive_t
 }
 
 /**
- *	scc_ide_dma_setup	-	begin a DMA phase
+ *	scc_dma_setup	-	begin a DMA phase
  *	@drive: target device
+ *	@cmd: command
  *
  *	Build an IDE DMA PRD (IDE speak for scatter gather table)
  *	and then set up the DMA transfer registers.
@@ -313,21 +314,15 @@ static void scc_dma_host_set(ide_drive_t
  *	is returned.
  */
 
-static int scc_dma_setup(ide_drive_t *drive)
+static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = hwif->rq;
-	unsigned int reading;
+	u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
 	u8 dma_stat;
 
-	if (rq_data_dir(rq))
-		reading = 0;
-	else
-		reading = 1 << 3;
-
 	/* fall back to pio! */
-	if (!ide_build_dmatable(drive, rq)) {
-		ide_map_sg(drive, rq);
+	if (ide_build_dmatable(drive, cmd) == 0) {
+		ide_map_sg(drive, cmd);
 		return 1;
 	}
 
@@ -335,7 +330,7 @@ static int scc_dma_setup(ide_drive_t *dr
 	out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
 
 	/* specify r/w */
-	out_be32((void __iomem *)hwif->dma_base, reading);
+	out_be32((void __iomem *)hwif->dma_base, rw);
 
 	/* read DMA status for INTR & ERROR flags */
 	dma_stat = scc_dma_sff_read_status(hwif);
Index: b/drivers/ide/sgiioc4.c
===================================================================
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -424,12 +424,11 @@ sgiioc4_configure_for_dma(int dma_direct
 /* | Upper 32 bits - Zero	    |EOL| 15 unused     | 16 Bit Length| */
 /* --------------------------------------------------------------------- */
 /* Creates the scatter gather list, DMA Table */
-static unsigned int
-sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
+static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	unsigned int *table = hwif->dmatable_cpu;
-	unsigned int count = 0, i = hwif->cmd.sg_nents;
+	unsigned int count = 0, i = cmd->sg_nents;
 	struct scatterlist *sg = hwif->sg_table;
 
 	while (i && sg_dma_len(sg)) {
@@ -484,24 +483,18 @@ use_pio_instead:
 	return 0;		/* revert to PIO for this request */
 }
 
-static int sgiioc4_dma_setup(ide_drive_t *drive)
+static int sgiioc4_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
-	struct request *rq = drive->hwif->rq;
-	unsigned int count = 0;
 	int ddir;
+	u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
 
-	if (rq_data_dir(rq))
-		ddir = PCI_DMA_TODEVICE;
-	else
-		ddir = PCI_DMA_FROMDEVICE;
-
-	if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) {
+	if (sgiioc4_build_dmatable(drive, cmd) == 0) {
 		/* try PIO instead of DMA */
-		ide_map_sg(drive, rq);
+		ide_map_sg(drive, cmd);
 		return 1;
 	}
 
-	if (rq_data_dir(rq))
+	if (write)
 		/* Writes TO the IOC4 FROM Main Memory */
 		ddir = IOC4_DMA_READ;
 	else
Index: b/drivers/ide/trm290.c
===================================================================
--- a/drivers/ide/trm290.c
+++ b/drivers/ide/trm290.c
@@ -181,13 +181,12 @@ static void trm290_dma_exec_cmd(ide_driv
 	ide_execute_command(drive, command, &ide_dma_intr, WAIT_CMD, NULL);
 }
 
-static int trm290_dma_setup(ide_drive_t *drive)
+static int trm290_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	struct request *rq = hwif->rq;
 	unsigned int count, rw;
 
-	if (rq_data_dir(rq)) {
+	if (cmd->tf_flags & IDE_TFLAG_WRITE) {
 #ifdef TRM290_NO_DMA_WRITES
 		/* always use PIO for writes */
 		trm290_prepare_drive(drive, 0);	/* select PIO xfer */
@@ -197,8 +196,9 @@ static int trm290_dma_setup(ide_drive_t 
 	} else
 		rw = 2;
 
-	if (!(count = ide_build_dmatable(drive, rq))) {
-		ide_map_sg(drive, rq);
+	count = ide_build_dmatable(drive, cmd);
+	if (count == 0) {
+		ide_map_sg(drive, cmd);
 		/* try PIO instead of DMA */
 		trm290_prepare_drive(drive, 0); /* select PIO xfer */
 		return 1;
Index: b/drivers/ide/tx4939ide.c
===================================================================
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -232,7 +232,7 @@ static u8 tx4939ide_clear_dma_status(voi
 
 #ifdef __BIG_ENDIAN
 /* custom ide_build_dmatable to handle swapped layout */
-static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq)
+static int tx4939ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	u32 *table = (u32 *)hwif->dmatable_cpu;
@@ -240,7 +240,7 @@ static int tx4939ide_build_dmatable(ide_
 	int i;
 	struct scatterlist *sg;
 
-	for_each_sg(hwif->sg_table, sg, hwif->cmd.sg_nents, i) {
+	for_each_sg(hwif->sg_table, sg, cmd->sg_nents, i) {
 		u32 cur_addr, cur_len, bcount;
 
 		cur_addr = sg_dma_address(sg);
@@ -287,23 +287,15 @@ use_pio_instead:
 #define tx4939ide_build_dmatable	ide_build_dmatable
 #endif
 
-static int tx4939ide_dma_setup(ide_drive_t *drive)
+static int tx4939ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	void __iomem *base = TX4939IDE_BASE(hwif);
-	struct request *rq = hwif->rq;
-	u8 reading;
-	int nent;
-
-	if (rq_data_dir(rq))
-		reading = 0;
-	else
-		reading = ATA_DMA_WR;
+	u8 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
 
 	/* fall back to PIO! */
-	nent = tx4939ide_build_dmatable(drive, rq);
-	if (!nent) {
-		ide_map_sg(drive, rq);
+	if (tx4939ide_build_dmatable(drive, cmd) == 0) {
+		ide_map_sg(drive, cmd);
 		return 1;
 	}
 
@@ -311,7 +303,7 @@ static int tx4939ide_dma_setup(ide_drive
 	tx4939ide_writel(hwif->dmatable_dma, base, TX4939IDE_PRD_Ptr);
 
 	/* specify r/w */
-	tx4939ide_writeb(reading, base, TX4939IDE_DMA_Cmd);
+	tx4939ide_writeb(rw, base, TX4939IDE_DMA_Cmd);
 
 	/* clear INTR & ERROR flags */
 	tx4939ide_clear_dma_status(base);
@@ -320,7 +312,9 @@ static int tx4939ide_dma_setup(ide_drive
 
 	tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ?
 			 TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1);
-	tx4939ide_writew(rq->nr_sectors, base, TX4939IDE_Sec_Cnt);
+
+	tx4939ide_writew(cmd->rq->nr_sectors, base, TX4939IDE_Sec_Cnt);
+
 	return 0;
 }
 
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -713,7 +713,7 @@ struct ide_port_ops {
 
 struct ide_dma_ops {
 	void	(*dma_host_set)(struct ide_drive_s *, int);
-	int	(*dma_setup)(struct ide_drive_s *);
+	int	(*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
 	void	(*dma_exec_cmd)(struct ide_drive_s *, u8);
 	void	(*dma_start)(struct ide_drive_s *);
 	int	(*dma_end)(struct ide_drive_s *);
@@ -1409,7 +1409,7 @@ int ide_pci_resume(struct pci_dev *);
 #define ide_pci_resume NULL
 #endif
 
-void ide_map_sg(ide_drive_t *, struct request *);
+void ide_map_sg(ide_drive_t *, struct ide_cmd *);
 void ide_init_sg_cmd(struct ide_cmd *, int);
 
 #define BAD_DMA_DRIVE		0
@@ -1444,14 +1444,14 @@ ide_startstop_t ide_dma_intr(ide_drive_t
 int ide_allocate_dma_engine(ide_hwif_t *);
 void ide_release_dma_engine(ide_hwif_t *);
 
-int ide_build_sglist(ide_drive_t *, struct request *);
+int ide_build_sglist(ide_drive_t *, struct ide_cmd *);
 void ide_destroy_dmatable(ide_drive_t *);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
 int config_drive_for_dma(ide_drive_t *);
-extern int ide_build_dmatable(ide_drive_t *, struct request *);
+int ide_build_dmatable(ide_drive_t *, struct ide_cmd *);
 void ide_dma_host_set(ide_drive_t *, int);
-extern int ide_dma_setup(ide_drive_t *);
+int ide_dma_setup(ide_drive_t *, struct ide_cmd *);
 void ide_dma_exec_cmd(ide_drive_t *, u8);
 extern void ide_dma_start(ide_drive_t *);
 int ide_dma_end(ide_drive_t *);
@@ -1479,7 +1479,7 @@ static inline void ide_check_dma_crc(ide
 static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
 static inline int ide_build_sglist(ide_drive_t *drive,
-				   struct request *rq) { return 0; }
+				   struct ide_cmd *cmd) { return 0; }
 #endif /* CONFIG_BLK_DEV_IDEDMA */
 
 #ifdef CONFIG_BLK_DEV_IDEACPI

  reply	other threads:[~2009-02-09 23:18 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-09 23:19 [PATCH 0/6] ide: more unifications of ATA and ATAPI support Bartlomiej Zolnierkiewicz
2009-02-09 23:19 ` Bartlomiej Zolnierkiewicz [this message]
2009-02-11  6:36   ` [PATCH 1/6] ide: pass command to ide_map_sg() Borislav Petkov
2009-02-11 16:28     ` Bartlomiej Zolnierkiewicz
2009-02-09 23:19 ` [PATCH 2/6] ide: use do_rw_taskfile() for ATA_CMD_PACKET commands Bartlomiej Zolnierkiewicz
2009-02-09 23:20 ` [PATCH 3/6] ide: set hwif->expiry prior to calling [__]ide_set_handler() Bartlomiej Zolnierkiewicz
2009-03-16 14:23   ` Sergei Shtylyov
2009-02-09 23:20 ` [PATCH 4/6] ide: add ->dma_expiry method and remove ->dma_exec_cmd one Bartlomiej Zolnierkiewicz
2009-02-10 18:18   ` Sergei Shtylyov
2009-02-11 16:30     ` Bartlomiej Zolnierkiewicz
2009-02-11 17:30       ` Sergei Shtylyov
2009-02-17 14:16         ` Bartlomiej Zolnierkiewicz
2009-02-17 14:29           ` Sergei Shtylyov
2009-02-09 23:20 ` [PATCH 5/6] ide: remove ide_execute_pkt_cmd() Bartlomiej Zolnierkiewicz
2009-02-11  6:55   ` Borislav Petkov
2009-02-11 13:22     ` Sergei Shtylyov
2009-02-11 13:37       ` Borislav Petkov
2009-02-11 13:49         ` Sergei Shtylyov
2009-02-11 16:32           ` Borislav Petkov
2009-02-15 12:24             ` Sergei Shtylyov
2009-02-15 17:39               ` Borislav Petkov
2009-02-15 23:18                 ` Sergei Shtylyov
2009-02-16  8:56                   ` Borislav Petkov
2009-02-11 16:37           ` Bartlomiej Zolnierkiewicz
2009-02-09 23:20 ` [PATCH 6/6] ide: keep track of number of bytes instead of sectors in struct ide_cmd Bartlomiej Zolnierkiewicz
2009-02-11  7:16 ` [PATCH 0/6] ide: more unifications of ATA and ATAPI support Borislav Petkov
2009-02-23 22:51   ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090209231952.32406.58013.sendpatchset@localhost.localdomain \
    --to=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=petkovbb@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.