From: Sitsofe Wheeler <sitsofe@yahoo.com>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>,
linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org,
ath5k-devel@venema.h4ckr.net,
Nick Kossifidis <mickflemm@gmail.com>,
"Luis R. Rodriguez" <lrodriguez@atheros.com>,
Bob Copeland <me@bobcopeland.com>
Subject: Re: [TIP] BUG kmalloc-4096: Poison overwritten (ath5k_rx_skb_alloc)
Date: Sun, 22 Feb 2009 22:21:19 +0000 [thread overview]
Message-ID: <20090222222119.GA20224@silver.sucs.org> (raw)
In-Reply-To: <49A1CA01.9030501@gmail.com>
On Sun, Feb 22, 2009 at 10:56:17PM +0100, Jiri Slaby wrote:
> Could you append lspci -vvnnxxx of your adapter? Better along with
> ath_info[1] output.
lspci -vvnnxxx
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00: 86 80 90 25 06 00 90 20 04 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d9 82
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
00: 86 80 92 25 07 00 90 00 04 00 00 03 00 00 80 00
10: 00 00 f0 f7 01 ec 00 00 08 00 00 d0 00 00 ec f7
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d9 82
30: 00 00 00 00 d0 00 00 00 00 00 00 00 05 01 00 00
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00: 86 80 92 27 07 00 90 00 04 00 80 03 00 00 80 00
10: 00 00 f8 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d9 82
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8337]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00: 86 80 68 26 06 00 10 00 04 00 03 04 04 00 00 00
10: 04 80 eb f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 37 83
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00: 86 80 60 26 04 05 10 00 04 00 04 06 04 00 81 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 f0 00 00 20
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 06 00
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00: 86 80 62 26 06 05 10 00 04 00 04 06 04 00 81 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
20: f0 fb f0 fb f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 06 00
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00: 86 80 64 26 06 05 10 00 04 00 04 06 04 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 02 00 f0 00 00 20
20: 00 f8 e0 fb 01 f0 f1 f6 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 03 06 00
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
00: 86 80 58 26 05 00 80 02 04 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
00: 86 80 59 26 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 e4 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 07 02 00 00
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
00: 86 80 5a 26 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e8 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
00: 86 80 5b 26 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 e8 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00: 86 80 5c 26 06 00 90 02 04 20 03 0c 00 00 00 00
10: 00 7c eb f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00: 86 80 48 24 04 01 10 00 d4 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 20 f0 00 80 22
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 86 80 41 26 07 00 00 02 04 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
00: 86 80 53 26 05 00 b0 02 04 80 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 70 00 00 00 00 00 00 00 00 02 00 00
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0400 [size=32]
00: 86 80 6a 26 01 00 80 02 04 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Unknown device [1a3b:1026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
00: 8c 16 1c 00 07 00 10 00 01 00 00 02 04 00 00 00
10: 04 00 ef fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 50 00 00 3b 1a 26 10
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbfa0000 [disabled] [size=128K]
Capabilities: <access denied>
00: 69 19 48 20 06 04 10 00 a0 00 00 02 04 00 00 00
10: 04 00 fc fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 33 82
30: 00 00 fa fb 40 00 00 00 00 00 00 00 0b 01 00 00
(I'm currently not on the problem network)
./ath_info fbef0000
sleep_ctl reg 00000000 reset_ctl reg 00000000
-==Device Information==-
MAC Revision: 2425 (0xe2)
Warning: Invalid EEPROM Magic number!
Device type: 3
/============== EEPROM Information =============\
| EEPROM Version: 5.3 | EEPROM Size: 4 kbit |
| EEMAP: 2 | Reg. Domain: 0x60 |
|================= Capabilities ================|
| 802.11a Support: no | Turbo-A disabled: yes |
| 802.11b Support: no | Turbo-G disabled: yes |
| 802.11g Support: yes | 2GHz XR disabled: yes |
| RFKill Support: yes | 5GHz XR disabled: yes |
| 32kHz Crystal: no | |
\===============================================/
/=========================================================\
| Calibration data common for all modes |
|=========================================================|
| CCK/OFDM gain delta: 1 |
| CCK/OFDM power delta: 5 |
| Scaled CCK delta: 5 |
| 2GHz Antenna gain: 1 |
| 5GHz Antenna gain: 4 |
| Turbo 2W maximum dBm: 38 |
| Target power start: 0x16e |
| EAR Start: 0x1b8 |
\=========================================================/
/=========================================================\
| Calibration data for 802.11g operation |
|=========================================================|
| I power: 0x00 | Q power: 0x13 |
| Use fixed bias: 0x01 | Max turbo power: 0x26 |
| Max XR power: 0x20 | Switch Settling Time: 0x28 |
| Tx/Rx attenuation: 0x19 | TX end to XLNA On: 0x00 |
| TX end to XPA Off: 0x00 | TX end to XPA On: 0x0e |
| 62db Threshold: 0x1c | XLNA gain: 0x00 |
| XPD: 0x01 | XPD gain: 0x0a |
| I gain: 0x00 | Tx/Rx margin: 0x01 |
| False detect backoff: 0x00 | Noise Floor Threshold: -1 |
| ADC desired size: -38 | PGA desired size: -80 |
|=========================================================|
| Antenna control 0: 0x00 | Antenna control 1: 0x01 |
| Antenna control 2: 0x22 | Antenna control 3: 0x22 |
| Antenna control 4: 0x00 | Antenna control 5: 0x00 |
| Antenna control 6: 0x02 | Antenna control 7: 0x21 |
| Antenna control 8: 0x21 | Antenna control 9: 0x00 |
| Antenna control 10: 0x00 | Antenna control 11: 0x02 |
|=========================================================|
| Octave Band 0: 3 | db 0: 3 |
| Octave Band 1: 4 | db 1: 4 |
| Octave Band 2: 0 | db 2: 0 |
| Octave Band 3: 0 | db 3: 0 |
\=========================================================/
/==================== Turbo mode infos ===================\
| Switch Settling time: 0x28 | Tx/Rx margin: 0x01 |
| Tx/Rx attenuation: 0x19 | ADC desired size: -32 |
| PGA desired size: -80 | |
\=========================================================/
/============== Per rate power calibration ===========\
| Freq | 6-24Mbit/s | 36Mbit/s | 48Mbit/s | 54Mbit/s |
|======|============|==========|===========|==========|
| 2412 | 16.00 | 15.00 | 14.00 | 13.00 |
|======|============|==========|===========|==========|
| 2437 | 16.00 | 15.00 | 14.00 | 13.00 |
|======|============|==========|===========|==========|
| 2472 | 16.00 | 15.00 | 14.00 | 13.00 |
\=====================================================/
/====================== Per channel power calibration ===================\
| Freq | pwr_i | pwr_0 | pwr_1 | pwr_2 | pwr_3 |
| | pddac_i | pddac_0 | pddac_1 | pddac_2 | pddac_3 |
|======|=========|=============|=============|=============|=============|
| 2412 | | | | | |
|------|---------|-------------|-------------|-------------|-------------|
| | 0 | 4.00 | 8.50 | 12.50 | 0.00 |
| | 10 | 15 | 47 | 83 | 0 |
|------|---------|-------------|-------------|-------------|-------------|
| | 10 | 13.00 | 16.00 | 18.00 | 20.50 |
| | 12 | 23 | 38 | 52 | 67 |
|======|=========|=============|=============|=============|=============|
| 2472 | | | | | |
|------|---------|-------------|-------------|-------------|-------------|
| | 0 | 4.00 | 8.50 | 13.00 | 0.00 |
| | 10 | 15 | 25 | 61 | 0 |
|------|---------|-------------|-------------|-------------|-------------|
| | 10 | 13.00 | 16.00 | 19.00 | 20.50 |
| | 9 | 18 | 33 | 45 | 46 |
|======|=========|=============|=============|=============|=============|
| 2484 | | | | | |
|------|---------|-------------|-------------|-------------|-------------|
| | 0 | 4.00 | 8.50 | 13.00 | 0.00 |
| | 10 | 15 | 20 | 55 | 0 |
|------|---------|-------------|-------------|-------------|-------------|
| | 10 | 12.50 | 16.00 | 19.00 | 20.00 |
| | 9 | 16 | 31 | 40 | 0 |
\========================================================================/
GPIO registers: CR 0x00000000, DO 0x00000000, DI 0x00000003
STA_ID0: 00:15:af:b6:12:07
STA_ID1: 0x10000712, AP: 0, IBSS: 0, KeyCache Disable: 0
TIMER0: 0x00000528, TBTT: 1320, TU: 0x109d0528
TIMER1: 0x000000e2, DMAb: 28, TU: 0x109d001c (-1292)
TIMER2: 0x000c00d0, SWBA: 32794, TU: 0x10c1801a (+2390770)
TIMER3: 0x000000e2, ATIM: 226, TU: 0x109d00e2 (-1094)
TSF: 0x0000004273c1c15f, TSFTU: 61552, TU: 0x109cf070
BEACON: 0x00108000
LAST_TSTP: 0x73c16196
--
Sitsofe | http://sucs.org/~sits/
next prev parent reply other threads:[~2009-02-22 22:21 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-22 11:18 [TIP] BUG kmalloc-4096: Poison overwritten (ath5k_rx_skb_alloc) Sitsofe Wheeler
2009-02-22 11:18 ` Sitsofe Wheeler
2009-02-22 12:01 ` Jiri Slaby
2009-02-22 12:01 ` Jiri Slaby
2009-02-22 12:20 ` Sitsofe Wheeler
2009-02-22 12:20 ` Sitsofe Wheeler
2009-02-22 12:47 ` Jiri Slaby
2009-02-22 12:47 ` Jiri Slaby
2009-02-22 14:47 ` Frederic Weisbecker
2009-02-22 14:47 ` Frederic Weisbecker
2009-02-22 17:02 ` Sitsofe Wheeler
2009-02-22 17:10 ` Frederic Weisbecker
2009-02-22 19:27 ` Jiri Slaby
2009-02-22 19:42 ` Frederic Weisbecker
2009-02-22 20:18 ` Sitsofe Wheeler
2009-02-22 20:27 ` Jiri Slaby
2009-02-22 20:30 ` Frederic Weisbecker
2009-02-22 21:56 ` Jiri Slaby
2009-02-22 22:21 ` Sitsofe Wheeler [this message]
2009-02-22 23:20 ` Jiri Slaby
2009-02-23 15:35 ` Bob Copeland
2009-02-23 16:03 ` Nick Kossifidis
2009-02-23 16:15 ` Nick Kossifidis
2009-02-23 16:21 ` Bob Copeland
2009-02-23 16:27 ` Nick Kossifidis
2009-02-23 16:30 ` Bob Copeland
2009-02-23 16:41 ` Nick Kossifidis
2009-02-23 16:44 ` Bob Copeland
2009-02-23 16:16 ` pat-lkml
2009-02-23 16:20 ` Nick Kossifidis
2009-02-23 22:22 ` Jiri Slaby
2009-02-23 22:43 ` Jiri Slaby
2009-02-23 23:08 ` Nick Kossifidis
2009-02-24 13:58 ` Bob Copeland
2009-02-24 21:47 ` Jiri Slaby
2009-02-25 14:01 ` Sitsofe Wheeler
2009-02-25 14:01 ` Sitsofe Wheeler
2009-02-26 1:06 ` Bob Copeland
2009-02-26 20:53 ` Jiri Slaby
2009-02-26 21:05 ` Bob Copeland
2009-02-26 13:59 ` Bob Copeland
2009-02-26 17:03 ` Sitsofe Wheeler
2009-03-02 17:34 ` [ath5k-devel] " Bob Copeland
2009-03-02 17:34 ` Bob Copeland
2009-03-03 4:12 ` Bob Copeland
2009-03-03 20:03 ` Sitsofe Wheeler
2009-03-04 12:07 ` Bob Copeland
2009-03-06 9:42 ` Sitsofe Wheeler
2009-03-07 4:47 ` Bob Copeland
2009-03-07 8:04 ` Sitsofe Wheeler
2009-03-07 13:34 ` Bob Copeland
2009-03-08 3:09 ` Bob Copeland
2009-03-08 9:28 ` Jiri Slaby
2009-03-08 16:10 ` Bob Copeland
2009-03-10 0:43 ` Bob Copeland
2009-03-10 8:19 ` Sitsofe Wheeler
2009-03-12 6:10 ` Sitsofe Wheeler
2009-03-12 6:10 ` Sitsofe Wheeler
2009-03-13 9:52 ` Sitsofe Wheeler
2009-03-13 12:28 ` Bob Copeland
2009-03-20 13:14 ` Bob Copeland
2009-03-29 14:24 ` Sitsofe Wheeler
2009-03-29 15:14 ` Bob Copeland
2009-03-31 8:30 ` Sitsofe Wheeler
2009-05-13 21:44 ` Sitsofe Wheeler
2009-05-13 21:44 ` Sitsofe Wheeler
2009-05-15 4:09 ` Bob Copeland
2009-05-18 10:05 ` Sitsofe Wheeler
2009-05-22 9:39 ` Sitsofe Wheeler
2009-05-22 12:06 ` Bob Copeland
2009-05-26 21:10 ` Sitsofe Wheeler
2009-06-28 20:23 ` Sitsofe Wheeler
2009-07-14 2:24 ` Bob Copeland
2009-02-26 1:11 ` Bob Copeland
2009-02-22 20:17 ` Bob Copeland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090222222119.GA20224@silver.sucs.org \
--to=sitsofe@yahoo.com \
--cc=ath5k-devel@venema.h4ckr.net \
--cc=fweisbec@gmail.com \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lrodriguez@atheros.com \
--cc=me@bobcopeland.com \
--cc=mickflemm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.