* [PATCH 3/11] mpt2sas: mptsas_ctl sources
@ 2009-02-24 9:33 Eric Moore
0 siblings, 0 replies; only message in thread
From: Eric Moore @ 2009-02-24 9:33 UTC (permalink / raw)
To: linux-scsi; +Cc: James.Bottomley
mptsas_ctl
Storage Management Module.
Signed-off-by: Eric Moore <eric.moore@lsi.com>
---
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c 1969-12-31 17:00:00.000000000 -0700
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c 2009-02-24 14:30:37.000000000 -0700
@@ -0,0 +1,2519 @@
+/*
+ * Management Module Support for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c
+ * Copyright (C) 2007-2008 LSI Corporation
+ * (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <linux/compat.h>
+#include <linux/poll.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include "mpt2sas_base.h"
+#include "mpt2sas_ctl.h"
+
+static struct fasync_struct *async_queue;
+static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
+
+/**
+ * enum block_state - blocking state
+ * @NON_BLOCKING: non blocking
+ * @BLOCKING: blocking
+ *
+ * These states are for ioctls that need to wait for a response
+ * from firmware, so they probably require sleep.
+ */
+enum block_state {
+ NON_BLOCKING,
+ BLOCKING,
+};
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+/**
+ * _ctl_display_some_debug - debug routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @calling_function_name: string pass from calling function
+ * @mpi_reply: reply message frame
+ * Context: none.
+ *
+ * Function for displaying debug info helpfull when debugging issues
+ * in this module.
+ */
+static void
+_ctl_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid,
+ char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
+{
+ Mpi2ConfigRequest_t *mpi_request;
+ char *desc = NULL;
+
+ if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
+ return;
+
+ mpi_request = base_get_msg_frame(ioc, smid);
+ switch (mpi_request->Function) {
+ case MPI2_FUNCTION_SCSI_IO_REQUEST:
+ {
+ Mpi2SCSIIORequest_t *scsi_request =
+ (Mpi2SCSIIORequest_t *)mpi_request;
+
+ snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
+ "scsi_io, cmd(0x%02x), cdb_len(%d)",
+ scsi_request->CDB.CDB32[0],
+ le16_to_cpu(scsi_request->IoFlags) & 0xF);
+ desc = ioc->tmp_string;
+ break;
+ }
+ case MPI2_FUNCTION_SCSI_TASK_MGMT:
+ desc = "task_mgmt";
+ break;
+ case MPI2_FUNCTION_IOC_INIT:
+ desc = "ioc_init";
+ break;
+ case MPI2_FUNCTION_IOC_FACTS:
+ desc = "ioc_facts";
+ break;
+ case MPI2_FUNCTION_CONFIG:
+ {
+ Mpi2ConfigRequest_t *config_request =
+ (Mpi2ConfigRequest_t *)mpi_request;
+
+ snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
+ "config, type(0x%02x), ext_type(0x%02x), number(%d)",
+ (config_request->Header.PageType &
+ MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
+ config_request->Header.PageNumber);
+ desc = ioc->tmp_string;
+ break;
+ }
+ case MPI2_FUNCTION_PORT_FACTS:
+ desc = "port_facts";
+ break;
+ case MPI2_FUNCTION_PORT_ENABLE:
+ desc = "port_enable";
+ break;
+ case MPI2_FUNCTION_EVENT_NOTIFICATION:
+ desc = "event_notification";
+ break;
+ case MPI2_FUNCTION_FW_DOWNLOAD:
+ desc = "fw_download";
+ break;
+ case MPI2_FUNCTION_FW_UPLOAD:
+ desc = "fw_upload";
+ break;
+ case MPI2_FUNCTION_RAID_ACTION:
+ desc = "raid_action";
+ break;
+ case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
+ {
+ Mpi2SCSIIORequest_t *scsi_request =
+ (Mpi2SCSIIORequest_t *)mpi_request;
+
+ snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
+ "raid_pass, cmd(0x%02x), cdb_len(%d)",
+ scsi_request->CDB.CDB32[0],
+ le16_to_cpu(scsi_request->IoFlags) & 0xF);
+ desc = ioc->tmp_string;
+ break;
+ }
+ case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+ desc = "sas_iounit_cntl";
+ break;
+ case MPI2_FUNCTION_SATA_PASSTHROUGH:
+ desc = "sata_pass";
+ break;
+ case MPI2_FUNCTION_DIAG_BUFFER_POST:
+ desc = "diag_buffer_post";
+ break;
+ case MPI2_FUNCTION_DIAG_RELEASE:
+ desc = "diag_release";
+ break;
+ case MPI2_FUNCTION_SMP_PASSTHROUGH:
+ desc = "smp_passthrough";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ printk(MPT2SAS_DEBUG_FMT "%s: %s, smid(%d)\n",
+ ioc->name, calling_function_name, desc, smid);
+
+ if (!mpi_reply)
+ return;
+
+ if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
+ printk(MPT2SAS_DEBUG_FMT
+ "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo));
+
+ if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+ mpi_request->Function ==
+ MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
+ Mpi2SCSIIOReply_t *scsi_reply =
+ (Mpi2SCSIIOReply_t *)mpi_reply;
+ if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
+ printk(MPT2SAS_DEBUG_FMT
+ "\tscsi_state(0x%02x), scsi_status"
+ "(0x%02x)\n", ioc->name,
+ scsi_reply->SCSIState,
+ scsi_reply->SCSIStatus);
+ }
+}
+#endif
+
+/**
+ * ctl_done - ctl module completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @VF_ID: virtual function id
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: none.
+ *
+ * The callback handler when using ioc->ctl_cb_idx.
+ *
+ * Return nothing.
+ */
+void
+ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+
+ if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED)
+ return;
+ if (ioc->ctl_cmds.smid != smid)
+ return;
+ ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE;
+ mpi_reply = base_get_reply_virt_addr(ioc, reply);
+ if (mpi_reply) {
+ memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+ ioc->ctl_cmds.status |= MPT2_CMD_REPLY_VALID;
+ }
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ _ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
+#endif
+ ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING;
+ complete(&ioc->ctl_cmds.done);
+}
+
+/**
+ * _ctl_check_event_type - determines when an event needs logging
+ * @ioc: per adapter object
+ * @event: firmware event
+ *
+ * The bitmask in ioc->event_type[] indicates which events should be
+ * be saved in the driver event_log. This bitmask is set by application.
+ *
+ * Returns 1 when event should be captured, or zero means no match.
+ */
+static int
+_ctl_check_event_type(struct MPT2SAS_ADAPTER *ioc, u16 event)
+{
+ u32 *event_type_mask = NULL;
+ u32 desired_event = 0;
+
+ if (event >= 128 || !event || !ioc->event_log)
+ return 0;
+
+ desired_event = (1 << (event % 32));
+ if (!desired_event)
+ desired_event = 1;
+
+ if (event < 32)
+ event_type_mask = &ioc->event_type[0];
+ else if (event < 64)
+ event_type_mask = &ioc->event_type[1];
+ else if (event < 96)
+ event_type_mask = &ioc->event_type[2];
+ else if (event < 128)
+ event_type_mask = &ioc->event_type[3];
+ return desired_event & *event_type_mask;
+}
+
+/**
+ * ctl_add_to_event_log - add event
+ * @ioc: per adapter object
+ * @mpi_reply: reply message frame
+ *
+ * Return nothing.
+ */
+void
+ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventNotificationReply_t *mpi_reply)
+{
+ struct MPT2_IOCTL_EVENTS *event_log;
+ u16 event;
+ int i;
+ u32 sz, event_data_sz;
+
+ if (!ioc->event_log)
+ return;
+
+ event = le16_to_cpu(mpi_reply->Event);
+ if (!_ctl_check_event_type(ioc, event))
+ return;
+
+ /* insert entry into circular event_log */
+ i = ioc->event_context % MPT2SAS_CTL_EVENT_LOG_SIZE;
+ event_log = ioc->event_log;
+ event_log[i].event = event;
+ event_log[i].context = ioc->event_context++;
+
+ event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
+ sz = min_t(u32, event_data_sz, MPT2_EVENT_DATA_SIZE);
+ memset(event_log[i].data, 0, MPT2_EVENT_DATA_SIZE);
+ memcpy(event_log[i].data, mpi_reply->EventData, sz);
+
+ /* This aen_event_read_flag flag is set until the
+ * application has read the event log.
+ * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
+ */
+ if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
+ !ioc->aen_event_read_flag) {
+ ioc->aen_event_read_flag = 1;
+ wake_up_interruptible(&ctl_poll_wait);
+ if (async_queue)
+ kill_fasync(&async_queue, SIGIO, POLL_IN);
+ }
+}
+
+/**
+ * ctl_event_callback - firmware event handler (called at ISR time)
+ * @ioc: per adapter object
+ * @VF_ID: virtual function id
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt.
+ *
+ * This function merely adds a new work task into ioc->firmware_event_thread.
+ * The tasks are worked from _firmware_event_work in user context.
+ *
+ * Return nothing.
+ */
+void
+ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
+{
+ Mpi2EventNotificationReply_t *mpi_reply;
+
+ mpi_reply = base_get_reply_virt_addr(ioc, reply);
+ ctl_add_to_event_log(ioc, mpi_reply);
+}
+
+/**
+ * _ctl_verify_adapter - validates ioc_number passed from application
+ * @ioc: per adapter object
+ * @iocpp: The ioc pointer is returned in this.
+ *
+ * Return (-1) means error, else ioc_number.
+ */
+static int
+_ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp)
+{
+ struct MPT2SAS_ADAPTER *ioc;
+
+ list_for_each_entry(ioc, &ioc_list, list) {
+ if (ioc->id != ioc_number)
+ continue;
+ *iocpp = ioc;
+ return ioc_number;
+ }
+ *iocpp = NULL;
+ return -1;
+}
+
+/**
+ * ctl_reset_handler - reset callback handler (for ctl)
+ * @ioc: per adapter object
+ * @reset_phase: phase
+ *
+ * The handler for doing any required cleanup or initialization.
+ *
+ * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
+ * MPT2_IOC_DONE_RESET
+ */
+void
+ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
+{
+ switch (reset_phase) {
+ case MPT2_IOC_PRE_RESET:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
+ break;
+ case MPT2_IOC_AFTER_RESET:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
+ if (ioc->ctl_cmds.status & MPT2_CMD_PENDING) {
+ ioc->ctl_cmds.status |= MPT2_CMD_RESET;
+ base_free_smid(ioc, ioc->ctl_cmds.smid);
+ complete(&ioc->ctl_cmds.done);
+ }
+ break;
+ case MPT2_IOC_DONE_RESET:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
+ break;
+ }
+}
+
+/**
+ * _ctl_fasync -
+ * @fd -
+ * @filep -
+ * @mode -
+ *
+ * Called when application request fasyn callback handler.
+ */
+static int
+_ctl_fasync(int fd, struct file *filep, int mode)
+{
+ return fasync_helper(fd, filep, mode, &async_queue);
+}
+
+/**
+ * _ctl_release -
+ * @inode -
+ * @filep -
+ *
+ * Called when application releases the fasyn callback handler.
+ */
+static int
+_ctl_release(struct inode *inode, struct file *filep)
+{
+ struct MPT2SAS_ADAPTER *ioc;
+ int rc = 0;
+
+ if (async_queue) {
+ rc = fasync_helper(-1, filep, 0, &async_queue);
+ if (!async_queue) {
+ list_for_each_entry(ioc, &ioc_list, list) {
+ kfree(ioc->event_log);
+ ioc->event_log = NULL;
+ }
+ }
+ }
+ return rc;
+}
+
+/**
+ * _ctl_poll -
+ * @file -
+ * @wait -
+ *
+ */
+static unsigned int
+_ctl_poll(struct file *filep, poll_table *wait)
+{
+ struct MPT2SAS_ADAPTER *ioc;
+
+ poll_wait(filep, &ctl_poll_wait, wait);
+
+ list_for_each_entry(ioc, &ioc_list, list) {
+ if (ioc->aen_event_read_flag)
+ return POLLIN | POLLRDNORM;
+ }
+ return 0;
+}
+
+/**
+ * _ctl_do_task_abort - assign an active smid to the abort_task
+ * @ioc: per adapter object
+ * @karg - (struct mpt2_ioctl_command)
+ * @tm_request - pointer to mf from user space
+ *
+ * Returns 0 when an smid if found, else fail.
+ * during failure, the reply frame is filled.
+ */
+static int
+_ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
+ Mpi2SCSITaskManagementRequest_t *tm_request)
+{
+ u8 found = 0;
+ u16 i;
+ u16 handle;
+ struct scsi_cmnd *scmd;
+ struct MPT2SAS_DEVICE *priv_data;
+ unsigned long flags;
+ Mpi2SCSITaskManagementReply_t *tm_reply;
+ u32 sz;
+ u32 lun;
+
+ lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
+
+ handle = le16_to_cpu(tm_request->DevHandle);
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ for (i = ioc->request_depth; i && !found; i--) {
+ scmd = ioc->scsi_lookup[i - 1].scmd;
+ if (scmd == NULL || scmd->device == NULL ||
+ scmd->device->hostdata == NULL)
+ continue;
+ if (lun != scmd->device->lun)
+ continue;
+ priv_data = scmd->device->hostdata;
+ if (priv_data->sas_target == NULL)
+ continue;
+ if (priv_data->sas_target->handle != handle)
+ continue;
+ tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid);
+ found = 1;
+ }
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+ if (!found) {
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
+ "DevHandle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
+ tm_request->DevHandle, lun));
+ tm_reply = ioc->ctl_cmds.reply;
+ tm_reply->DevHandle = tm_request->DevHandle;
+ tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+ tm_reply->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK;
+ tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
+ tm_reply->VP_ID = tm_request->VP_ID;
+ tm_reply->VF_ID = tm_request->VF_ID;
+ sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
+ if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
+ sz))
+ printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
+ __LINE__, __func__);
+ return 1;
+ }
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
+ "DevHandle(0x%04x), lun(%d), smid(%d)\n", ioc->name,
+ tm_request->DevHandle, lun, tm_request->TaskMID));
+ return 0;
+}
+
+/**
+ * _ctl_do_mpt_command - main handler for MPT2COMMAND opcode
+ * @ioc: per adapter object
+ * @karg - (struct mpt2_ioctl_command)
+ * @mf - pointer to mf in user space
+ * @state - NON_BLOCKING or BLOCKING
+ */
+static long
+_ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
+ struct mpt2_ioctl_command karg, void __user *mf, enum block_state state)
+{
+ MPI2RequestHeader_t *mpi_request;
+ MPI2DefaultReply_t *mpi_reply;
+ u32 ioc_state;
+ u16 ioc_status;
+ u16 smid;
+ unsigned long timeout, timeleft;
+ u8 issue_reset;
+ u32 sz;
+ void *psge;
+ void *priv_sense = NULL;
+ void *data_out = NULL;
+ dma_addr_t data_out_dma;
+ size_t data_out_sz = 0;
+ void *data_in = NULL;
+ dma_addr_t data_in_dma;
+ size_t data_in_sz = 0;
+ u32 sgl_flags;
+ long ret;
+ u16 wait_state_count;
+
+ issue_reset = 0;
+
+ if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+ return -EAGAIN;
+ else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+ return -ERESTARTSYS;
+
+ if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
+ printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
+ ioc->name, __func__);
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ wait_state_count = 0;
+ ioc_state = base_get_iocstate(ioc, 1);
+ while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ if (wait_state_count++ == 10) {
+ printk(MPT2SAS_ERR_FMT
+ "%s: failed due to ioc not operational\n",
+ ioc->name, __func__);
+ ret = -EFAULT;
+ goto out;
+ }
+ ssleep(1);
+ ioc_state = base_get_iocstate(ioc, 1);
+ printk(MPT2SAS_INFO_FMT "%s: waiting for "
+ "operational state(count=%d)\n", ioc->name,
+ __func__, wait_state_count);
+ }
+ if (wait_state_count)
+ printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
+ ioc->name, __func__);
+
+ smid = base_get_smid(ioc, ioc->ctl_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ ret = 0;
+ ioc->ctl_cmds.status = MPT2_CMD_PENDING;
+ memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+ mpi_request = base_get_msg_frame(ioc, smid);
+ ioc->ctl_cmds.smid = smid;
+ data_out_sz = karg.data_out_size;
+ data_in_sz = karg.data_in_size;
+
+ /* copy in request message frame from user */
+ if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__,
+ __func__);
+ ret = -EFAULT;
+ base_free_smid(ioc, smid);
+ goto out;
+ }
+
+ if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+ mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
+ if (!mpi_request->FunctionDependent1 ||
+ mpi_request->FunctionDependent1 >
+ cpu_to_le16(ioc->facts.MaxDevHandle)) {
+ ret = -EINVAL;
+ base_free_smid(ioc, smid);
+ goto out;
+ }
+ }
+
+ /* obtain dma-able memory for data transfer */
+ if (data_out_sz) /* WRITE */ {
+ data_out = pci_alloc_consistent(ioc->pdev, data_out_sz,
+ &data_out_dma);
+ if (!data_out) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
+ __LINE__, __func__);
+ ret = -ENOMEM;
+ base_free_smid(ioc, smid);
+ goto out;
+ }
+ if (copy_from_user(data_out, karg.data_out_buf_ptr,
+ data_out_sz)) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
+ __LINE__, __func__);
+ ret = -EFAULT;
+ base_free_smid(ioc, smid);
+ goto out;
+ }
+ }
+
+ if (data_in_sz) /* READ */ {
+ data_in = pci_alloc_consistent(ioc->pdev, data_in_sz,
+ &data_in_dma);
+ if (!data_in) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
+ __LINE__, __func__);
+ ret = -ENOMEM;
+ base_free_smid(ioc, smid);
+ goto out;
+ }
+ }
+
+ /* add scatter gather elements */
+ psge = (void *)mpi_request + (karg.data_sge_offset*4);
+
+ if (!data_out_sz && !data_in_sz) {
+ base_build_zero_len_sge(ioc, psge);
+ } else if (data_out_sz && data_in_sz) {
+ /* WRITE sgel first */
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_out_sz, data_out_dma);
+
+ /* incr sgel */
+ psge += ioc->sge_size;
+
+ /* READ sgel last */
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+ MPI2_SGE_FLAGS_END_OF_LIST);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_in_sz, data_in_dma);
+ } else if (data_out_sz) /* WRITE */ {
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+ MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_out_sz, data_out_dma);
+ } else if (data_in_sz) /* READ */ {
+ sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
+ MPI2_SGE_FLAGS_END_OF_LIST);
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+ ioc->base_add_sg_single(psge, sgl_flags |
+ data_in_sz, data_in_dma);
+ }
+
+ /* send command to firmware */
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ _ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
+#endif
+
+ switch (mpi_request->Function) {
+ case MPI2_FUNCTION_SCSI_IO_REQUEST:
+ case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
+ {
+ Mpi2SCSIIORequest_t *scsiio_request =
+ (Mpi2SCSIIORequest_t *)mpi_request;
+ scsiio_request->SenseBufferLowAddress =
+ (u32)base_get_sense_buffer_dma(ioc, smid);
+ priv_sense = base_get_sense_buffer(ioc, smid);
+ memset(priv_sense, 0, SCSI_SENSE_BUFFERSIZE);
+ base_put_smid_scsi_io(ioc, smid, 0,
+ le16_to_cpu(mpi_request->FunctionDependent1));
+ break;
+ }
+ case MPI2_FUNCTION_SCSI_TASK_MGMT:
+ {
+ Mpi2SCSITaskManagementRequest_t *tm_request =
+ (Mpi2SCSITaskManagementRequest_t *)mpi_request;
+
+ if (tm_request->TaskType ==
+ MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
+ if (_ctl_do_task_abort(ioc, &karg, tm_request))
+ goto out;
+ }
+
+ mutex_lock(&ioc->tm_cmds.mutex);
+ scsih_set_tm_flag(ioc, le16_to_cpu(tm_request->DevHandle));
+ base_put_smid_hi_priority(ioc, smid, mpi_request->VF_ID);
+ break;
+ }
+ case MPI2_FUNCTION_SMP_PASSTHROUGH:
+ {
+ Mpi2SmpPassthroughRequest_t *smp_request =
+ (Mpi2SmpPassthroughRequest_t *)mpi_request;
+ u8 *data;
+
+ /* ioc determines which port to use */
+ smp_request->PhysicalPort = 0xFF;
+
+ data = data_out;
+ if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
+ ioc->ioc_link_reset_in_progress = 1;
+ ioc->ignore_loginfos = 1;
+ }
+ base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ break;
+ }
+ case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
+ {
+ Mpi2SasIoUnitControlRequest_t *sasiounit_request =
+ (Mpi2SasIoUnitControlRequest_t *)mpi_request;
+
+ if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
+ || sasiounit_request->Operation ==
+ MPI2_SAS_OP_PHY_LINK_RESET) {
+ ioc->ioc_link_reset_in_progress = 1;
+ ioc->ignore_loginfos = 1;
+ }
+ base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ break;
+ }
+ default:
+ base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ break;
+ }
+
+ if (karg.timeout < MPT2_IOCTL_DEFAULT_TIMEOUT)
+ timeout = MPT2_IOCTL_DEFAULT_TIMEOUT;
+ else
+ timeout = karg.timeout;
+ timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+ timeout*HZ);
+ if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
+ Mpi2SCSITaskManagementRequest_t *tm_request =
+ (Mpi2SCSITaskManagementRequest_t *)mpi_request;
+ mutex_unlock(&ioc->tm_cmds.mutex);
+ scsih_clear_tm_flag(ioc, le16_to_cpu(tm_request->DevHandle));
+ } else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
+ mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
+ ioc->ioc_link_reset_in_progress) {
+ ioc->ioc_link_reset_in_progress = 0;
+ ioc->ignore_loginfos = 0;
+ }
+ if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
+ printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
+ __func__);
+ _debug_dump_mf(mpi_request, karg.data_sge_offset);
+ if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
+ issue_reset = 1;
+ goto issue_host_reset;
+ }
+
+ mpi_reply = ioc->ctl_cmds.reply;
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+ if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
+ Mpi2SCSITaskManagementReply_t *tm_reply =
+ (Mpi2SCSITaskManagementReply_t *)mpi_reply;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "TASK_MGMT: "
+ "IOCStatus(0x%04x), IOCLogInfo(0x%08x), "
+ "TerminationCount(0x%08x)\n", ioc->name,
+ tm_reply->IOCStatus, tm_reply->IOCLogInfo,
+ tm_reply->TerminationCount));
+ }
+
+ /* copy out xdata to user */
+ if (data_in_sz) {
+ if (copy_to_user(karg.data_in_buf_ptr, data_in,
+ data_in_sz)) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
+ __LINE__, __func__);
+ ret = -ENODATA;
+ goto out;
+ }
+ }
+
+ /* copy out reply message frame to user */
+ if (karg.max_reply_bytes) {
+ sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
+ if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
+ sz)) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
+ __LINE__, __func__);
+ ret = -ENODATA;
+ goto out;
+ }
+ }
+
+ /* copy out sense to user */
+ if (karg.max_sense_bytes && (mpi_request->Function ==
+ MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
+ MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
+ sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE);
+ if (copy_to_user(karg.sense_data_ptr, priv_sense, sz)) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
+ __LINE__, __func__);
+ ret = -ENODATA;
+ goto out;
+ }
+ }
+
+ issue_host_reset:
+ if (issue_reset) {
+ if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
+ mpi_request->Function ==
+ MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
+ printk(MPT2SAS_INFO_FMT "issue target reset: handle "
+ "= (0x%04x)\n", ioc->name,
+ mpi_request->FunctionDependent1);
+ mutex_lock(&ioc->tm_cmds.mutex);
+ scsih_issue_tm(ioc, mpi_request->FunctionDependent1, 0,
+ MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->tm_cmds.mutex);
+ } else
+ base_hard_reset_handler(ioc, CAN_SLEEP,
+ FORCE_BIG_HAMMER);
+ }
+
+ out:
+
+ /* free memory associated with sg buffers */
+ if (data_in)
+ pci_free_consistent(ioc->pdev, data_in_sz, data_in,
+ data_in_dma);
+
+ if (data_out)
+ pci_free_consistent(ioc->pdev, data_out_sz, data_out,
+ data_out_dma);
+
+ ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->ctl_cmds.mutex);
+ return ret;
+}
+
+/**
+ * _ctl_getiocinfo - main handler for MPT2IOCINFO opcode
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_getiocinfo(void __user *arg)
+{
+ struct mpt2_ioctl_iocinfo karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ u8 revision;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ __func__));
+
+ memset(&karg, 0 , sizeof(karg));
+ karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
+ if (ioc->pfacts)
+ karg.port_number = ioc->pfacts[0].PortNumber;
+ pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
+ karg.hw_rev = revision;
+ karg.pci_id = ioc->pdev->device;
+ karg.subsystem_device = ioc->pdev->subsystem_device;
+ karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
+ karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
+ karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
+ karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
+ karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
+ karg.firmware_version = ioc->facts.FWVersion.Word;
+ strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION,
+ MPT2_IOCTL_VERSION_LENGTH);
+ karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0';
+ karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
+
+ if (copy_to_user(arg, &karg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ return 0;
+}
+
+/**
+ * _ctl_eventquery - main handler for MPT2EVENTQUERY opcode
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_eventquery(void __user *arg)
+{
+ struct mpt2_ioctl_eventquery karg;
+ struct MPT2SAS_ADAPTER *ioc;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ __func__));
+
+ karg.event_entries = MPT2SAS_CTL_EVENT_LOG_SIZE;
+ memcpy(karg.event_types, ioc->event_type,
+ MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
+
+ if (copy_to_user(arg, &karg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ return 0;
+}
+
+/**
+ * _ctl_eventenable - main handler for MPT2EVENTENABLE opcode
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_eventenable(void __user *arg)
+{
+ struct mpt2_ioctl_eventenable karg;
+ struct MPT2SAS_ADAPTER *ioc;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ __func__));
+
+ if (ioc->event_log)
+ return 0;
+ memcpy(ioc->event_type, karg.event_types,
+ MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
+ base_validate_event_type(ioc, ioc->event_type);
+
+ /* initialize event_log */
+ ioc->event_context = 0;
+ ioc->aen_event_read_flag = 0;
+ ioc->event_log = kcalloc(MPT2SAS_CTL_EVENT_LOG_SIZE,
+ sizeof(struct MPT2_IOCTL_EVENTS), GFP_KERNEL);
+ if (!ioc->event_log) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/**
+ * _ctl_eventreport - main handler for MPT2EVENTREPORT opcode
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_eventreport(void __user *arg)
+{
+ struct mpt2_ioctl_eventreport karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ u32 number_bytes, max_events, max;
+ struct mpt2_ioctl_eventreport __user *uarg = arg;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ __func__));
+
+ number_bytes = karg.hdr.max_data_size -
+ sizeof(struct mpt2_ioctl_header);
+ max_events = number_bytes/sizeof(struct MPT2_IOCTL_EVENTS);
+ max = min_t(u32, MPT2SAS_CTL_EVENT_LOG_SIZE, max_events);
+
+ /* If fewer than 1 event is requested, there must have
+ * been some type of error.
+ */
+ if (!max || !ioc->event_log)
+ return -ENODATA;
+
+ number_bytes = max * sizeof(struct MPT2_IOCTL_EVENTS);
+ if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+
+ /* reset flag so SIGIO can restart */
+ ioc->aen_event_read_flag = 0;
+ return 0;
+}
+
+/**
+ * _ctl_do_reset - main handler for MPT2HARDRESET opcode
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_do_reset(void __user *arg)
+{
+ struct mpt2_ioctl_diag_reset karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ int retval;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ __func__));
+
+ retval = base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER);
+ printk(MPT2SAS_INFO_FMT "host reset: %s\n",
+ ioc->name, ((!retval) ? "SUCCESS" : "FAILED"));
+ return 0;
+}
+
+/**
+ * _ctl_btdh_search_sas_device - searching for sas device
+ * @ioc: per adapter object
+ * @btdh: btdh ioctl payload
+ */
+static int
+_ctl_btdh_search_sas_device(struct MPT2SAS_ADAPTER *ioc,
+ struct mpt2_ioctl_btdh_mapping *btdh)
+{
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ int rc = 0;
+
+ if (list_empty(&ioc->sas_device_list))
+ return rc;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+ if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
+ btdh->handle == sas_device->handle) {
+ btdh->bus = sas_device->channel;
+ btdh->id = sas_device->id;
+ rc = 1;
+ goto out;
+ } else if (btdh->bus == sas_device->channel && btdh->id ==
+ sas_device->id && btdh->handle == 0xFFFF) {
+ btdh->handle = sas_device->handle;
+ rc = 1;
+ goto out;
+ }
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ return rc;
+}
+
+/**
+ * _ctl_btdh_search_raid_device - searching for raid device
+ * @ioc: per adapter object
+ * @btdh: btdh ioctl payload
+ */
+static int
+_ctl_btdh_search_raid_device(struct MPT2SAS_ADAPTER *ioc,
+ struct mpt2_ioctl_btdh_mapping *btdh)
+{
+ struct _raid_device *raid_device;
+ unsigned long flags;
+ int rc = 0;
+
+ if (list_empty(&ioc->raid_device_list))
+ return rc;
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+ if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
+ btdh->handle == raid_device->handle) {
+ btdh->bus = raid_device->channel;
+ btdh->id = raid_device->id;
+ rc = 1;
+ goto out;
+ } else if (btdh->bus == raid_device->channel && btdh->id ==
+ raid_device->id && btdh->handle == 0xFFFF) {
+ btdh->handle = raid_device->handle;
+ rc = 1;
+ goto out;
+ }
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+ return rc;
+}
+
+/**
+ * _ctl_btdh_mapping - main handler for MPT2BTDHMAPPING opcode
+ * @arg - user space buffer containing ioctl content
+ */
+static long
+_ctl_btdh_mapping(void __user *arg)
+{
+ struct mpt2_ioctl_btdh_mapping karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ int rc;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ rc = _ctl_btdh_search_sas_device(ioc, &karg);
+ if (!rc)
+ _ctl_btdh_search_raid_device(ioc, &karg);
+
+ if (copy_to_user(arg, &karg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ return 0;
+}
+
+/**
+ * _ctl_diag_capability - return diag buffer capability
+ * @ioc: per adapter object
+ * @buffer_type: specifies either TRACE or SNAPSHOT
+ *
+ * returns 1 when diag buffer support is enabled in firmware
+ */
+static u8
+_ctl_diag_capability(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type)
+{
+ u8 rc = 0;
+
+ switch (buffer_type) {
+ case MPI2_DIAG_BUF_TYPE_TRACE:
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
+ rc = 1;
+ break;
+ case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
+ rc = 1;
+ break;
+ }
+
+ return rc;
+}
+
+/**
+ * _ctl_diag_register - application register with driver
+ * @arg - user space buffer containing ioctl content
+ * @state - NON_BLOCKING or BLOCKING
+ *
+ * This will allow the driver to setup any required buffers that will be
+ * needed by firmware to communicate with the driver.
+ */
+static long
+_ctl_diag_register(void __user *arg, enum block_state state)
+{
+ struct mpt2_diag_register karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ int rc, i;
+ void *request_data = NULL;
+ dma_addr_t request_data_dma;
+ u32 request_data_sz = 0;
+ Mpi2DiagBufferPostRequest_t *mpi_request;
+ Mpi2DiagBufferPostReply_t *mpi_reply;
+ u8 buffer_type;
+ unsigned long timeleft;
+ u16 smid;
+ u16 ioc_status;
+ u8 issue_reset = 0;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ buffer_type = karg.buffer_type;
+ if (!_ctl_diag_capability(ioc, buffer_type)) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -EPERM;
+ }
+
+ if (ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED) {
+ printk(MPT2SAS_ERR_FMT "%s: already has a registered "
+ "buffer for buffer_type(0x%02x)\n", ioc->name, __func__,
+ buffer_type);
+ return -EINVAL;
+ }
+
+ if (karg.requested_buffer_size % 4) {
+ printk(MPT2SAS_ERR_FMT "%s: the requested_buffer_size "
+ "is not 4 byte aligned\n", ioc->name, __func__);
+ return -EINVAL;
+ }
+
+ if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+ return -EAGAIN;
+ else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+ return -ERESTARTSYS;
+
+ if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
+ printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ smid = base_get_smid(ioc, ioc->ctl_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ rc = 0;
+ ioc->ctl_cmds.status = MPT2_CMD_PENDING;
+ memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+ mpi_request = base_get_msg_frame(ioc, smid);
+ ioc->ctl_cmds.smid = smid;
+
+ request_data = ioc->diag_buffer[buffer_type];
+ request_data_sz = karg.requested_buffer_size;
+ ioc->unique_id[buffer_type] = karg.unique_id;
+ ioc->diag_buffer_status[buffer_type] = 0;
+ memcpy(ioc->product_specific[buffer_type], karg.product_specific,
+ MPT2_PRODUCT_SPECIFIC_DWORDS);
+ ioc->diagnostic_flags[buffer_type] = karg.diagnostic_flags;
+
+ if (request_data) {
+ request_data_dma = ioc->diag_buffer_dma[buffer_type];
+ if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
+ pci_free_consistent(ioc->pdev,
+ ioc->diag_buffer_sz[buffer_type],
+ request_data, request_data_dma);
+ request_data = NULL;
+ }
+ }
+
+ if (request_data == NULL) {
+ ioc->diag_buffer_sz[buffer_type] = 0;
+ ioc->diag_buffer_dma[buffer_type] = 0;
+ request_data = pci_alloc_consistent(
+ ioc->pdev, request_data_sz, &request_data_dma);
+ if (request_data == NULL) {
+ printk(MPT2SAS_ERR_FMT "%s: failed allocating memory"
+ " for diag buffers, requested size(%d)\n",
+ ioc->name, __func__, request_data_sz);
+ base_free_smid(ioc, smid);
+ return -ENOMEM;
+ }
+ ioc->diag_buffer[buffer_type] = request_data;
+ ioc->diag_buffer_sz[buffer_type] = request_data_sz;
+ ioc->diag_buffer_dma[buffer_type] = request_data_dma;
+ }
+
+ mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
+ mpi_request->BufferType = karg.buffer_type;
+ mpi_request->Flags = cpu_to_le32(karg.diagnostic_flags);
+ mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
+ mpi_request->BufferLength = cpu_to_le32(request_data_sz);
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(0x%p), "
+ "dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data,
+ (unsigned long long)request_data_dma, mpi_request->BufferLength));
+
+ for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
+ mpi_request->ProductSpecific[i] =
+ cpu_to_le32(ioc->product_specific[buffer_type][i]);
+
+ base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+ MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
+
+ if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
+ printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
+ __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2DiagBufferPostRequest_t)/4);
+ if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
+ issue_reset = 1;
+ goto issue_host_reset;
+ }
+
+ /* process the completed Reply Message Frame */
+ if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
+ ioc->name, __func__);
+ rc = -EFAULT;
+ goto out;
+ }
+
+ mpi_reply = ioc->ctl_cmds.reply;
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ ioc->diag_buffer_status[buffer_type] |=
+ MPT2_DIAG_BUFFER_IS_REGISTERED;
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n",
+ ioc->name, __func__));
+ } else {
+ printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
+ "log_info(0x%08x)\n", ioc->name, __func__,
+ ioc_status, mpi_reply->IOCLogInfo);
+ rc = -EFAULT;
+ }
+
+ issue_host_reset:
+ if (issue_reset)
+ base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER);
+
+ out:
+
+ if (rc && request_data)
+ pci_free_consistent(ioc->pdev, request_data_sz,
+ request_data, request_data_dma);
+
+ ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->ctl_cmds.mutex);
+ return rc;
+}
+
+/**
+ * _ctl_diag_unregister - application unregister with driver
+ * @arg - user space buffer containing ioctl content
+ *
+ * This will allow the driver to cleanup any memory allocated for diag
+ * messages and to free up any resources.
+ */
+static long
+_ctl_diag_unregister(void __user *arg)
+{
+ struct mpt2_diag_unregister karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ void *request_data;
+ dma_addr_t request_data_dma;
+ u32 request_data_sz;
+ u8 buffer_type;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ buffer_type = karg.unique_id & 0x000000ff;
+ if (!_ctl_diag_capability(ioc, buffer_type)) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -EPERM;
+ }
+
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
+ "registered\n", ioc->name, __func__, buffer_type);
+ return -EINVAL;
+ }
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) has not been "
+ "released\n", ioc->name, __func__, buffer_type);
+ return -EINVAL;
+ }
+
+ if (karg.unique_id != ioc->unique_id[buffer_type]) {
+ printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
+ "registered\n", ioc->name, __func__, karg.unique_id);
+ return -EINVAL;
+ }
+
+ request_data = ioc->diag_buffer[buffer_type];
+ if (!request_data) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -ENOMEM;
+ }
+
+ request_data_sz = ioc->diag_buffer_sz[buffer_type];
+ request_data_dma = ioc->diag_buffer_dma[buffer_type];
+ pci_free_consistent(ioc->pdev, request_data_sz,
+ request_data, request_data_dma);
+ ioc->diag_buffer[buffer_type] = NULL;
+ ioc->diag_buffer_status[buffer_type] = 0;
+ return 0;
+}
+
+/**
+ * _ctl_diag_query - query relevant info associated with diag buffers
+ * @arg - user space buffer containing ioctl content
+ *
+ * The application will send only buffer_type and unique_id. Driver will
+ * inspect unique_id first, if valid, fill in all the info. If unique_id is
+ * 0x00, the driver will return info specified by Buffer Type.
+ */
+static long
+_ctl_diag_query(void __user *arg)
+{
+ struct mpt2_diag_query karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ void *request_data;
+ int i;
+ u8 buffer_type;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ karg.application_flags = 0;
+ buffer_type = karg.buffer_type;
+
+ if (!_ctl_diag_capability(ioc, buffer_type)) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -EPERM;
+ }
+
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
+ "registered\n", ioc->name, __func__, buffer_type);
+ return -EINVAL;
+ }
+
+ if (karg.unique_id & 0xffffff00) {
+ if (karg.unique_id != ioc->unique_id[buffer_type]) {
+ printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
+ "registered\n", ioc->name, __func__,
+ karg.unique_id);
+ return -EINVAL;
+ }
+ }
+
+ request_data = ioc->diag_buffer[buffer_type];
+ if (!request_data) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -ENOMEM;
+ }
+
+ if (ioc->diag_buffer_status[buffer_type] & MPT2_DIAG_BUFFER_IS_RELEASED)
+ karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
+ MPT2_APP_FLAGS_BUFFER_VALID);
+ else
+ karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
+ MPT2_APP_FLAGS_BUFFER_VALID |
+ MPT2_APP_FLAGS_FW_BUFFER_ACCESS);
+
+ for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
+ karg.product_specific[i] =
+ ioc->product_specific[buffer_type][i];
+
+ karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
+ karg.driver_added_buffer_size = 0;
+ karg.unique_id = ioc->unique_id[buffer_type];
+ karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
+
+ if (copy_to_user(arg, &karg, sizeof(struct mpt2_diag_query))) {
+ printk(MPT2SAS_ERR_FMT "%s: unable to write mpt2_diag_query "
+ "data @ %p\n", ioc->name, __func__, arg);
+ return -EFAULT;
+ }
+ return 0;
+}
+
+/**
+ * _ctl_diag_release - request to send Diag Release Message to firmware
+ * @arg - user space buffer containing ioctl content
+ * @state - NON_BLOCKING or BLOCKING
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+static long
+_ctl_diag_release(void __user *arg, enum block_state state)
+{
+ struct mpt2_diag_release karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ void *request_data;
+ int rc;
+ Mpi2DiagReleaseRequest_t *mpi_request;
+ Mpi2DiagReleaseReply_t *mpi_reply;
+ u8 buffer_type;
+ unsigned long timeleft;
+ u16 smid;
+ u16 ioc_status;
+ u8 issue_reset = 0;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ buffer_type = karg.unique_id & 0x000000ff;
+ if (!_ctl_diag_capability(ioc, buffer_type)) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -EPERM;
+ }
+
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
+ "registered\n", ioc->name, __func__, buffer_type);
+ return -EINVAL;
+ }
+
+ if (karg.unique_id != ioc->unique_id[buffer_type]) {
+ printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
+ "registered\n", ioc->name, __func__, karg.unique_id);
+ return -EINVAL;
+ }
+
+ if (ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_RELEASED) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+ "is already released\n", ioc->name, __func__,
+ buffer_type);
+ return 0;
+ }
+
+ request_data = ioc->diag_buffer[buffer_type];
+
+ if (!request_data) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -ENOMEM;
+ }
+
+ if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+ return -EAGAIN;
+ else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+ return -ERESTARTSYS;
+
+ if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
+ printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ smid = base_get_smid(ioc, ioc->ctl_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ rc = 0;
+ ioc->ctl_cmds.status = MPT2_CMD_PENDING;
+ memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+ mpi_request = base_get_msg_frame(ioc, smid);
+ ioc->ctl_cmds.smid = smid;
+
+ mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
+ mpi_request->BufferType = buffer_type;
+
+ base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+ MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
+
+ if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
+ printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
+ __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2DiagReleaseRequest_t)/4);
+ if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
+ issue_reset = 1;
+ goto issue_host_reset;
+ }
+
+ /* process the completed Reply Message Frame */
+ if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
+ ioc->name, __func__);
+ rc = -EFAULT;
+ goto out;
+ }
+
+ mpi_reply = ioc->ctl_cmds.reply;
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ ioc->diag_buffer_status[buffer_type] |=
+ MPT2_DIAG_BUFFER_IS_RELEASED;
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n",
+ ioc->name, __func__));
+ } else {
+ printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
+ "log_info(0x%08x)\n", ioc->name, __func__,
+ ioc_status, mpi_reply->IOCLogInfo);
+ rc = -EFAULT;
+ }
+
+ issue_host_reset:
+ if (issue_reset)
+ base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER);
+
+ out:
+
+ ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->ctl_cmds.mutex);
+ return rc;
+}
+
+/**
+ * _ctl_diag_read_buffer - request for copy of the diag buffer
+ * @arg - user space buffer containing ioctl content
+ * @state - NON_BLOCKING or BLOCKING
+ */
+static long
+_ctl_diag_read_buffer(void __user *arg, enum block_state state)
+{
+ struct mpt2_diag_read_buffer karg;
+ struct mpt2_diag_read_buffer __user *uarg = arg;
+ struct MPT2SAS_ADAPTER *ioc;
+ void *request_data, *diag_data;
+ Mpi2DiagBufferPostRequest_t *mpi_request;
+ Mpi2DiagBufferPostReply_t *mpi_reply;
+ int rc, i;
+ u8 buffer_type;
+ unsigned long timeleft;
+ u16 smid;
+ u16 ioc_status;
+ u8 issue_reset = 0;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ buffer_type = karg.unique_id & 0x000000ff;
+ if (!_ctl_diag_capability(ioc, buffer_type)) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -EPERM;
+ }
+
+ if (karg.unique_id != ioc->unique_id[buffer_type]) {
+ printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
+ "registered\n", ioc->name, __func__, karg.unique_id);
+ return -EINVAL;
+ }
+
+ request_data = ioc->diag_buffer[buffer_type];
+ if (!request_data) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -ENOMEM;
+ }
+
+ if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
+ printk(MPT2SAS_ERR_FMT "%s: either the starting_offset "
+ "or bytes_to_read are not 4 byte aligned\n", ioc->name,
+ __func__);
+ return -EINVAL;
+ }
+
+ diag_data = (void *)(request_data + karg.starting_offset);
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(%p), "
+ "offset(%d), sz(%d)\n", ioc->name, __func__,
+ diag_data, karg.starting_offset, karg.bytes_to_read));
+
+ if (copy_to_user((void __user *)uarg->diagnostic_data,
+ diag_data, karg.bytes_to_read)) {
+ printk(MPT2SAS_ERR_FMT "%s: Unable to write "
+ "mpt_diag_read_buffer_t data @ %p\n", ioc->name,
+ __func__, diag_data);
+ return -EFAULT;
+ }
+
+ if ((karg.flags & MPT2_FLAGS_REREGISTER) == 0)
+ return 0;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: Reregister "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type));
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "buffer_type(0x%02x) is still registered\n", ioc->name,
+ __func__, buffer_type));
+ return 0;
+ }
+ /* Get a free request frame and save the message context.
+ */
+ if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+ return -EAGAIN;
+ else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+ return -ERESTARTSYS;
+
+ if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
+ printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ smid = base_get_smid(ioc, ioc->ctl_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ rc = 0;
+ ioc->ctl_cmds.status = MPT2_CMD_PENDING;
+ memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
+ mpi_request = base_get_msg_frame(ioc, smid);
+ ioc->ctl_cmds.smid = smid;
+
+ mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
+ mpi_request->BufferType = buffer_type;
+ mpi_request->BufferLength =
+ cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
+ mpi_request->BufferAddress =
+ cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
+ for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
+ mpi_request->ProductSpecific[i] =
+ cpu_to_le32(ioc->product_specific[buffer_type][i]);
+
+ base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
+ MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
+
+ if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
+ printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
+ __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2DiagBufferPostRequest_t)/4);
+ if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
+ issue_reset = 1;
+ goto issue_host_reset;
+ }
+
+ /* process the completed Reply Message Frame */
+ if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
+ ioc->name, __func__);
+ rc = -EFAULT;
+ goto out;
+ }
+
+ mpi_reply = ioc->ctl_cmds.reply;
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ ioc->diag_buffer_status[buffer_type] |=
+ MPT2_DIAG_BUFFER_IS_REGISTERED;
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n",
+ ioc->name, __func__));
+ } else {
+ printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
+ "log_info(0x%08x)\n", ioc->name, __func__,
+ ioc_status, mpi_reply->IOCLogInfo);
+ rc = -EFAULT;
+ }
+
+ issue_host_reset:
+ if (issue_reset)
+ base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER);
+
+ out:
+
+ ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->ctl_cmds.mutex);
+ return rc;
+}
+
+/**
+ * _ctl_ioctl_main - main ioctl entry point
+ * @file - (struct file)
+ * @cmd - ioctl opcode
+ * @arg -
+ */
+static long
+_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg)
+{
+ enum block_state state;
+ long ret = -EINVAL;
+ unsigned long flags;
+
+ state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING :
+ BLOCKING;
+
+ switch (cmd) {
+ case MPT2IOCINFO:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_iocinfo))
+ ret = _ctl_getiocinfo(arg);
+ break;
+ case MPT2COMMAND:
+ {
+ struct mpt2_ioctl_command karg;
+ struct mpt2_ioctl_command __user *uarg;
+ struct MPT2SAS_ADAPTER *ioc;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 ||
+ !ioc)
+ return -ENODEV;
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->shost_recovery) {
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
+ flags);
+ return -EAGAIN;
+ }
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) {
+ uarg = arg;
+ ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf, state);
+ }
+ break;
+ }
+ case MPT2EVENTQUERY:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventquery))
+ ret = _ctl_eventquery(arg);
+ break;
+ case MPT2EVENTENABLE:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventenable))
+ ret = _ctl_eventenable(arg);
+ break;
+ case MPT2EVENTREPORT:
+ ret = _ctl_eventreport(arg);
+ break;
+ case MPT2HARDRESET:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_diag_reset))
+ ret = _ctl_do_reset(arg);
+ break;
+ case MPT2BTDHMAPPING:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_btdh_mapping))
+ ret = _ctl_btdh_mapping(arg);
+ break;
+ case MPT2DIAGREGISTER:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_register))
+ ret = _ctl_diag_register(arg, state);
+ break;
+ case MPT2DIAGUNREGISTER:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_unregister))
+ ret = _ctl_diag_unregister(arg);
+ break;
+ case MPT2DIAGQUERY:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_query))
+ ret = _ctl_diag_query(arg);
+ break;
+ case MPT2DIAGRELEASE:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_release))
+ ret = _ctl_diag_release(arg, state);
+ break;
+ case MPT2DIAGREADBUFFER:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_read_buffer))
+ ret = _ctl_diag_read_buffer(arg, state);
+ break;
+ default:
+ {
+ struct mpt2_ioctl_command karg;
+ struct MPT2SAS_ADAPTER *ioc;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 ||
+ !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ "unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd));
+ break;
+ }
+ }
+ return ret;
+}
+
+/**
+ * _ctl_ioctl - main ioctl entry point (unlocked)
+ * @file - (struct file)
+ * @cmd - ioctl opcode
+ * @arg -
+ */
+static long
+_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ long ret;
+ lock_kernel();
+ ret = _ctl_ioctl_main(file, cmd, (void __user *)arg);
+ unlock_kernel();
+ return ret;
+}
+
+#ifdef CONFIG_COMPAT
+/**
+ * _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
+ * @file - (struct file)
+ * @cmd - ioctl opcode
+ * @arg - (struct mpt2_ioctl_command32)
+ *
+ * MPT2COMMAND32 - Handle 32bit applications running on 64bit os.
+ */
+static long
+_ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg)
+{
+ struct mpt2_ioctl_command32 karg32;
+ struct mpt2_ioctl_command32 __user *uarg;
+ struct mpt2_ioctl_command karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ enum block_state state;
+ unsigned long flags;
+
+ if (_IOC_SIZE(cmd) != sizeof(struct mpt2_ioctl_command32))
+ return -EINVAL;
+
+ uarg = (struct mpt2_ioctl_command32 __user *) arg;
+
+ if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->shost_recovery) {
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
+ flags);
+ return -EAGAIN;
+ }
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ memset(&karg, 0, sizeof(struct mpt2_ioctl_command));
+ karg.hdr.ioc_number = karg32.hdr.ioc_number;
+ karg.hdr.port_number = karg32.hdr.port_number;
+ karg.hdr.max_data_size = karg32.hdr.max_data_size;
+ karg.timeout = karg32.timeout;
+ karg.max_reply_bytes = karg32.max_reply_bytes;
+ karg.data_in_size = karg32.data_in_size;
+ karg.data_out_size = karg32.data_out_size;
+ karg.max_sense_bytes = karg32.max_sense_bytes;
+ karg.data_sge_offset = karg32.data_sge_offset;
+ memcpy(&karg.reply_frame_buf_ptr, &karg32.reply_frame_buf_ptr,
+ sizeof(uint32_t));
+ memcpy(&karg.data_in_buf_ptr, &karg32.data_in_buf_ptr,
+ sizeof(uint32_t));
+ memcpy(&karg.data_out_buf_ptr, &karg32.data_out_buf_ptr,
+ sizeof(uint32_t));
+ memcpy(&karg.sense_data_ptr, &karg32.sense_data_ptr,
+ sizeof(uint32_t));
+ state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
+ return _ctl_do_mpt_command(ioc, karg, &uarg->mf, state);
+}
+
+/**
+ * _ctl_ioctl_compat - main ioctl entry point (compat)
+ * @file -
+ * @cmd -
+ * @arg -
+ *
+ * This routine handles 32 bit applications in 64bit os.
+ */
+static long
+_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
+{
+ long ret;
+ lock_kernel();
+ if (cmd == MPT2COMMAND32)
+ ret = _ctl_compat_mpt_command(file, cmd, arg);
+ else
+ ret = _ctl_ioctl_main(file, cmd, (void __user *)arg);
+ unlock_kernel();
+ return ret;
+}
+#endif
+
+/* scsi host attributes */
+
+/**
+ * _ctl_version_fw_show - firmware version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_fw_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
+ (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
+ (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
+ (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
+ ioc->facts.FWVersion.Word & 0x000000FF);
+}
+static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL);
+
+/**
+ * _ctl_version_bios_show - bios version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_bios_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
+
+ return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
+ (version & 0xFF000000) >> 24,
+ (version & 0x00FF0000) >> 16,
+ (version & 0x0000FF00) >> 8,
+ version & 0x000000FF);
+}
+static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL);
+
+/**
+ * _ctl_version_mpi_show - MPI (message passing interface) version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
+ ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
+}
+static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL);
+
+/**
+ * _ctl_version_product_show - product name
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_product_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
+}
+static DEVICE_ATTR(version_product, S_IRUGO,
+ _ctl_version_product_show, NULL);
+
+/**
+ * _ctl_version_nvdata_persistent_show - ndvata persistent version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_nvdata_persistent_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "%02xh\n",
+ le16_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
+}
+static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
+ _ctl_version_nvdata_persistent_show, NULL);
+
+/**
+ * _ctl_version_nvdata_default_show - nvdata default version
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_version_nvdata_default_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "%02xh\n",
+ le16_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
+}
+static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
+ _ctl_version_nvdata_default_show, NULL);
+
+/**
+ * _ctl_board_name_show - board name
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_board_name_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
+}
+static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL);
+
+/**
+ * _ctl_board_assembly_show - board assembly name
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
+}
+static DEVICE_ATTR(board_assembly, S_IRUGO,
+ _ctl_board_assembly_show, NULL);
+
+/**
+ * _ctl_board_tracer_show - board tracer number
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
+}
+static DEVICE_ATTR(board_tracer, S_IRUGO,
+ _ctl_board_tracer_show, NULL);
+
+/**
+ * _ctl_io_delay_show - io missing delay
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is for firmware implemention for deboucing device
+ * removal events.
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_io_delay_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
+}
+static DEVICE_ATTR(io_delay, S_IRUGO,
+ _ctl_io_delay_show, NULL);
+
+/**
+ * _ctl_device_delay_show - device missing delay
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is for firmware implemention for deboucing device
+ * removal events.
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_device_delay_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
+}
+static DEVICE_ATTR(device_delay, S_IRUGO,
+ _ctl_device_delay_show, NULL);
+
+/**
+ * _ctl_fw_queue_depth_show - global credits
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is firmware queue depth limit
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
+}
+static DEVICE_ATTR(fw_queue_depth, S_IRUGO,
+ _ctl_fw_queue_depth_show, NULL);
+
+/**
+ * _ctl_sas_address_show - sas address
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is the controller sas address
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+ (unsigned long long)ioc->sas_hba.sas_address);
+}
+static DEVICE_ATTR(host_sas_address, S_IRUGO,
+ _ctl_host_sas_address_show, NULL);
+
+/**
+ * _ctl_logging_level_show - logging level
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_logging_level_show(struct device *cdev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
+}
+static ssize_t
+_ctl_logging_level_store(struct device *cdev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ int val = 0;
+
+ if (sscanf(buf, "%x", &val) != 1)
+ return -EINVAL;
+
+ ioc->logging_level = val;
+ printk(MPT2SAS_INFO_FMT "logging_level=%08xh\n", ioc->name,
+ ioc->logging_level);
+ return strlen(buf);
+}
+static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
+ _ctl_logging_level_show, _ctl_logging_level_store);
+
+struct device_attribute *mpt2sas_host_attrs[] = {
+ &dev_attr_version_fw,
+ &dev_attr_version_bios,
+ &dev_attr_version_mpi,
+ &dev_attr_version_product,
+ &dev_attr_version_nvdata_persistent,
+ &dev_attr_version_nvdata_default,
+ &dev_attr_board_name,
+ &dev_attr_board_assembly,
+ &dev_attr_board_tracer,
+ &dev_attr_io_delay,
+ &dev_attr_device_delay,
+ &dev_attr_logging_level,
+ &dev_attr_fw_queue_depth,
+ &dev_attr_host_sas_address,
+ NULL,
+};
+
+/* device attributes */
+
+/**
+ * _ctl_device_sas_address_show - sas address
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is the sas address for the target
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
+
+ return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+ (unsigned long long)sas_device_priv_data->sas_target->sas_address);
+}
+static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL);
+
+/**
+ * _ctl_device_handle_show - device handle
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * This is the firmware assigned device handle
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t
+_ctl_device_handle_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
+
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n",
+ sas_device_priv_data->sas_target->handle);
+}
+static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL);
+
+struct device_attribute *mpt2sas_dev_attrs[] = {
+ &dev_attr_sas_address,
+ &dev_attr_sas_device_handle,
+ NULL,
+};
+
+static const struct file_operations ctl_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = _ctl_ioctl,
+ .release = _ctl_release,
+ .poll = _ctl_poll,
+ .fasync = _ctl_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = _ctl_ioctl_compat,
+#endif
+};
+
+static struct miscdevice ctl_dev = {
+ .minor = MPT2SAS_MINOR,
+ .name = MPT2SAS_DEV_NAME,
+ .fops = &ctl_fops,
+};
+
+/**
+ * ctl_init - main entry point for ctl.
+ *
+ */
+void
+ctl_init(void)
+{
+ async_queue = NULL;
+ if (misc_register(&ctl_dev) < 0)
+ printk(KERN_ERR "%s can't register misc device [minor=%d]\n",
+ MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
+
+ init_waitqueue_head(&ctl_poll_wait);
+}
+
+/**
+ * ctl_exit - exit point for ctl
+ *
+ */
+void
+ctl_exit(void)
+{
+ struct MPT2SAS_ADAPTER *ioc;
+ int i;
+
+ list_for_each_entry(ioc, &ioc_list, list) {
+
+ /* free memory associated to diag buffers */
+ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+ if (!ioc->diag_buffer[i])
+ continue;
+ pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i],
+ ioc->diag_buffer[i], ioc->diag_buffer_dma[i]);
+ ioc->diag_buffer[i] = NULL;
+ ioc->diag_buffer_status[i] = 0;
+ }
+
+ kfree(ioc->event_log);
+ }
+ misc_deregister(&ctl_dev);
+}
+
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h 1969-12-31 17:00:00.000000000 -0700
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h 2009-02-24 14:17:02.000000000 -0700
@@ -0,0 +1,416 @@
+/*
+ * Management Module Support for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
+ * Copyright (C) 2007-2008 LSI Corporation
+ * (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#ifndef MPT2SAS_CTL_H_INCLUDED
+#define MPT2SAS_CTL_H_INCLUDED
+
+#ifdef __KERNEL__
+#include <linux/miscdevice.h>
+#endif
+
+#define MPT2SAS_DEV_NAME "mpt2ctl"
+#define MPT2_MAGIC_NUMBER 'm'
+#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
+
+/**
+ * IOCTL opcodes
+ */
+#define MPT2IOCINFO _IOWR(MPT2_MAGIC_NUMBER, 17, \
+ struct mpt2_ioctl_iocinfo)
+#define MPT2COMMAND _IOWR(MPT2_MAGIC_NUMBER, 20, \
+ struct mpt2_ioctl_command)
+#ifdef CONFIG_COMPAT
+#define MPT2COMMAND32 _IOWR(MPT2_MAGIC_NUMBER, 20, \
+ struct mpt2_ioctl_command32)
+#endif
+#define MPT2EVENTQUERY _IOWR(MPT2_MAGIC_NUMBER, 21, \
+ struct mpt2_ioctl_eventquery)
+#define MPT2EVENTENABLE _IOWR(MPT2_MAGIC_NUMBER, 22, \
+ struct mpt2_ioctl_eventenable)
+#define MPT2EVENTREPORT _IOWR(MPT2_MAGIC_NUMBER, 23, \
+ struct mpt2_ioctl_eventreport)
+#define MPT2HARDRESET _IOWR(MPT2_MAGIC_NUMBER, 24, \
+ struct mpt2_ioctl_diag_reset)
+#define MPT2BTDHMAPPING _IOWR(MPT2_MAGIC_NUMBER, 31, \
+ struct mpt2_ioctl_btdh_mapping)
+
+/* diag buffer support */
+#define MPT2DIAGREGISTER _IOWR(MPT2_MAGIC_NUMBER, 26, \
+ struct mpt2_diag_register)
+#define MPT2DIAGRELEASE _IOWR(MPT2_MAGIC_NUMBER, 27, \
+ struct mpt2_diag_release)
+#define MPT2DIAGUNREGISTER _IOWR(MPT2_MAGIC_NUMBER, 28, \
+ struct mpt2_diag_unregister)
+#define MPT2DIAGQUERY _IOWR(MPT2_MAGIC_NUMBER, 29, \
+ struct mpt2_diag_query)
+#define MPT2DIAGREADBUFFER _IOWR(MPT2_MAGIC_NUMBER, 30, \
+ struct mpt2_diag_read_buffer)
+
+/**
+ * struct mpt2_ioctl_header - main header structure
+ * @ioc_number - IOC unit number
+ * @port_number - IOC port number
+ * @max_data_size - maximum number bytes to transfer on read
+ */
+struct mpt2_ioctl_header {
+ uint32_t ioc_number;
+ uint32_t port_number;
+ uint32_t max_data_size;
+};
+
+/**
+ * struct mpt2_ioctl_diag_reset - diagnostic reset
+ * @hdr - generic header
+ */
+struct mpt2_ioctl_diag_reset {
+ struct mpt2_ioctl_header hdr;
+};
+
+
+/**
+ * struct mpt2_ioctl_pci_info - pci device info
+ * @device - pci device id
+ * @function - pci function id
+ * @bus - pci bus id
+ * @segment_id - pci segment id
+ */
+struct mpt2_ioctl_pci_info {
+ union {
+ struct {
+ uint32_t device:5;
+ uint32_t function:3;
+ uint32_t bus:24;
+ } bits;
+ uint32_t word;
+ } u;
+ uint32_t segment_id;
+};
+
+
+#define MPT2_IOCTL_INTERFACE_SCSI (0x00)
+#define MPT2_IOCTL_INTERFACE_FC (0x01)
+#define MPT2_IOCTL_INTERFACE_FC_IP (0x02)
+#define MPT2_IOCTL_INTERFACE_SAS (0x03)
+#define MPT2_IOCTL_INTERFACE_SAS2 (0x04)
+#define MPT2_IOCTL_VERSION_LENGTH (32)
+
+/**
+ * struct mpt2_ioctl_iocinfo - generic controller info
+ * @hdr - generic header
+ * @adapter_type - type of adapter (spi, fc, sas)
+ * @port_number - port number
+ * @pci_id - PCI Id
+ * @hw_rev - hardware revision
+ * @sub_system_device - PCI subsystem Device ID
+ * @sub_system_vendor - PCI subsystem Vendor ID
+ * @rsvd0 - reserved
+ * @firmware_version - firmware version
+ * @bios_version - BIOS version
+ * @driver_version - driver version - 32 ASCII characters
+ * @rsvd1 - reserved
+ * @scsi_id - scsi id of adapter 0
+ * @rsvd2 - reserved
+ * @pci_information - pci info (2nd revision)
+ */
+struct mpt2_ioctl_iocinfo {
+ struct mpt2_ioctl_header hdr;
+ uint32_t adapter_type;
+ uint32_t port_number;
+ uint32_t pci_id;
+ uint32_t hw_rev;
+ uint32_t subsystem_device;
+ uint32_t subsystem_vendor;
+ uint32_t rsvd0;
+ uint32_t firmware_version;
+ uint32_t bios_version;
+ uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
+ uint8_t rsvd1;
+ uint8_t scsi_id;
+ uint16_t rsvd2;
+ struct mpt2_ioctl_pci_info pci_information;
+};
+
+
+/* number of event log entries */
+#define MPT2SAS_CTL_EVENT_LOG_SIZE (50)
+
+/**
+ * struct mpt2_ioctl_eventquery - query event count and type
+ * @hdr - generic header
+ * @event_entries - number of events returned by get_event_report
+ * @rsvd - reserved
+ * @event_types - type of events currently being captured
+ */
+struct mpt2_ioctl_eventquery {
+ struct mpt2_ioctl_header hdr;
+ uint16_t event_entries;
+ uint16_t rsvd;
+ uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+};
+
+/**
+ * struct mpt2_ioctl_eventenable - enable/disable event capturing
+ * @hdr - generic header
+ * @event_types - toggle off/on type of events to be captured
+ */
+struct mpt2_ioctl_eventenable {
+ struct mpt2_ioctl_header hdr;
+ uint32_t event_types[4];
+};
+
+#define MPT2_EVENT_DATA_SIZE (192)
+/**
+ * struct MPT2_IOCTL_EVENTS -
+ * @event - the event that was reported
+ * @context - unique value for each event assigned by driver
+ * @data - event data returned in fw reply message
+ */
+struct MPT2_IOCTL_EVENTS {
+ uint32_t event;
+ uint32_t context;
+ uint8_t data[MPT2_EVENT_DATA_SIZE];
+};
+
+/**
+ * struct mpt2_ioctl_eventreport - returing event log
+ * @hdr - generic header
+ * @event_data - (see struct MPT2_IOCTL_EVENTS)
+ */
+struct mpt2_ioctl_eventreport {
+ struct mpt2_ioctl_header hdr;
+ struct MPT2_IOCTL_EVENTS event_data[1];
+};
+
+/**
+ * struct mpt2_ioctl_command - generic mpt firmware passthru ioclt
+ * @hdr - generic header
+ * @timeout - command timeout in seconds. (if zero then use driver default
+ * value).
+ * @reply_frame_buf_ptr - reply location
+ * @data_in_buf_ptr - destination for read
+ * @data_out_buf_ptr - data source for write
+ * @sense_data_ptr - sense data location
+ * @max_reply_bytes - maximum number of reply bytes to be sent to app.
+ * @data_in_size - number bytes for data transfer in (read)
+ * @data_out_size - number bytes for data transfer out (write)
+ * @max_sense_bytes - maximum number of bytes for auto sense buffers
+ * @data_sge_offset - offset in words from the start of the request message to
+ * the first SGL
+ * @mf[1];
+ */
+struct mpt2_ioctl_command {
+ struct mpt2_ioctl_header hdr;
+ uint32_t timeout;
+ void __user *reply_frame_buf_ptr;
+ void __user *data_in_buf_ptr;
+ void __user *data_out_buf_ptr;
+ void __user *sense_data_ptr;
+ uint32_t max_reply_bytes;
+ uint32_t data_in_size;
+ uint32_t data_out_size;
+ uint32_t max_sense_bytes;
+ uint32_t data_sge_offset;
+ uint8_t mf[1];
+};
+
+#ifdef CONFIG_COMPAT
+struct mpt2_ioctl_command32 {
+ struct mpt2_ioctl_header hdr;
+ uint32_t timeout;
+ uint32_t reply_frame_buf_ptr;
+ uint32_t data_in_buf_ptr;
+ uint32_t data_out_buf_ptr;
+ uint32_t sense_data_ptr;
+ uint32_t max_reply_bytes;
+ uint32_t data_in_size;
+ uint32_t data_out_size;
+ uint32_t max_sense_bytes;
+ uint32_t data_sge_offset;
+ uint8_t mf[1];
+};
+#endif
+
+/**
+ * struct mpt2_ioctl_btdh_mapping - mapping info
+ * @hdr - generic header
+ * @id - target device identification number
+ * @bus - SCSI bus number that the target device exists on
+ * @handle - device handle for the target device
+ * @rsvd - reserved
+ *
+ * To obtain a bus/id the application sets
+ * handle to valid handle, and bus/id to 0xFFFF.
+ *
+ * To obtain the device handle the application sets
+ * bus/id valid value, and the handle to 0xFFFF.
+ */
+struct mpt2_ioctl_btdh_mapping {
+ struct mpt2_ioctl_header hdr;
+ uint32_t id;
+ uint32_t bus;
+ uint16_t handle;
+ uint16_t rsvd;
+};
+
+
+/* status bits for ioc->diag_buffer_status */
+#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
+#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
+
+/* application flags for mpt2_diag_register, mpt2_diag_query */
+#define MPT2_APP_FLAGS_APP_OWNED (0x0001)
+#define MPT2_APP_FLAGS_BUFFER_VALID (0x0002)
+#define MPT2_APP_FLAGS_FW_BUFFER_ACCESS (0x0004)
+
+/* flags for mpt2_diag_read_buffer */
+#define MPT2_FLAGS_REREGISTER (0x0001)
+
+#define MPT2_PRODUCT_SPECIFIC_DWORDS 23
+
+/**
+ * struct mpt2_diag_register - application register with driver
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @requested_buffer_size - buffers size in bytes
+ * @unique_id - tag specified by application that is used to signal ownership
+ * of the buffer.
+ *
+ * This will allow the driver to setup any required buffers that will be
+ * needed by firmware to communicate with the driver.
+ */
+struct mpt2_diag_register {
+ struct mpt2_ioctl_header hdr;
+ uint8_t reserved;
+ uint8_t buffer_type;
+ uint16_t application_flags;
+ uint32_t diagnostic_flags;
+ uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
+ uint32_t requested_buffer_size;
+ uint32_t unique_id;
+};
+
+/**
+ * struct mpt2_diag_unregister - application unregister with driver
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be unregistered
+ *
+ * This will allow the driver to cleanup any memory allocated for diag
+ * messages and to free up any resources.
+ */
+struct mpt2_diag_unregister {
+ struct mpt2_ioctl_header hdr;
+ uint32_t unique_id;
+};
+
+/**
+ * struct mpt2_diag_query - query relevant info associated with diag buffers
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @total_buffer_size - diag buffer size in bytes
+ * @driver_added_buffer_size - size of extra space appended to end of buffer
+ * @unique_id - unique id associated with this buffer.
+ *
+ * The application will send only buffer_type and unique_id. Driver will
+ * inspect unique_id first, if valid, fill in all the info. If unique_id is
+ * 0x00, the driver will return info specified by Buffer Type.
+ */
+struct mpt2_diag_query {
+ struct mpt2_ioctl_header hdr;
+ uint8_t reserved;
+ uint8_t buffer_type;
+ uint16_t application_flags;
+ uint32_t diagnostic_flags;
+ uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS];
+ uint32_t total_buffer_size;
+ uint32_t driver_added_buffer_size;
+ uint32_t unique_id;
+};
+
+/**
+ * struct mpt2_diag_release - request to send Diag Release Message to firmware
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be released
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+struct mpt2_diag_release {
+ struct mpt2_ioctl_header hdr;
+ uint32_t unique_id;
+};
+
+/**
+ * struct mpt2_diag_read_buffer - request for copy of the diag buffer
+ * @hdr - generic header
+ * @status -
+ * @reserved -
+ * @flags - misc flags
+ * @starting_offset - starting offset within drivers buffer where to start
+ * reading data at into the specified application buffer
+ * @bytes_to_read - number of bytes to copy from the drivers buffer into the
+ * application buffer starting at starting_offset.
+ * @unique_id - unique id associated with this buffer.
+ * @diagnostic_data - data payload
+ */
+struct mpt2_diag_read_buffer {
+ struct mpt2_ioctl_header hdr;
+ uint8_t status;
+ uint8_t reserved;
+ uint16_t flags;
+ uint32_t starting_offset;
+ uint32_t bytes_to_read;
+ uint32_t unique_id;
+ uint32_t diagnostic_data[1];
+};
+
+#endif /* MPT2SAS_CTL_H_INCLUDED */
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-02-24 23:15 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-24 9:33 [PATCH 3/11] mpt2sas: mptsas_ctl sources Eric Moore
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.