All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Love <robert.w.love@intel.com>
To: james.bottomley@hansenpartnership.com, linux-scsi@vger.kernel.org
Subject: [PATCH 00/24] libfc and fcoe fixes for 2.6.29-rc
Date: Fri, 27 Feb 2009 10:54:30 -0800	[thread overview]
Message-ID: <20090227185430.25509.34309.stgit@fritz> (raw)

The following series implements fixes for Open-FCoE (libfc and fcoe).
All of these patches had been sent to linux-scsi previously, with the
exception of the last 6 patches, which are new.

Of the last 6 patches one is a patch mailed to linux-scsi, not from
Open-FCoE.org, that has not been applied yet. That patch is-

   Roel Kluin -  fcoe: fix kfree(skb)

Also, the very last patch converts the FCoE Rx threads to a nice value
of -20. I sought advice on linux-scsi to determine a good value for
these threads, but didn't get feedback. Since other FC driver threads
use -20, this is the value I chose. If this is not a good starting
value, then please do not apply the patch, but I would appreciate
feedback as to a better value.

This patch set is based on Linus' 2.6.29-rc6 tree. I chose this tree
becuase it is more current than rc-fixes. If a rebase and resend is
let me know.

---

Abhijeet Joglekar (2):
      libfc: when rport goes away (re-plogi), clean up exchanges to/from rport
      libfc: Pass lport in exch_mgr_reset

Chris Leech (2):
      fcoe: fix handling of pending queue, prevent out of order frames (v3)
      libfc: rport retry on LS_RJT from certain ELS

Robert Love (11):
      fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20
      fcoe: Correct fcoe_transports initialization vs. registration
      fcoe: Use setup_timer() and mod_timer()
      libfc, fcoe: Remove unnecessary cast by removing inline wrapper
      libfc, fcoe: Cleanup function formatting and minor typos
      libfc, fcoe: Fix kerneldoc comments
      libfc: Cleanup libfc_function_template comments
      libfc: check for err when recv and state is incorrect
      libfc: rename rp to rdata in fc_disc_new_target()
      libfc: correct RPORT_TO_PRIV usage
      libfc: Don't violate transport template for rogue port creation

Roel Kluin (1):
      fcoe: fix kfree(skb)

Steve Ma (1):
      libfc: exch mgr is freed while lport still retrying sequences

Vasu Dev (5):
      fcoe: Out of order tx frames was causing several check condition SCSI status
      libfc: fixed a read IO data integrity issue when a IO data frame lost
      libfc, fcoe: fixed locking issues with lport->lp_mutex around lport->link_status
      libfc: fixed a soft lockup issue in fc_exch_recv_abts
      libfc: handle RRQ exch timeout

Yi Zou (2):
      fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway
      libfc: do not change the fh_rx_id of a recevied frame


 drivers/scsi/fcoe/fc_transport_fcoe.c |   91 +++++----
 drivers/scsi/fcoe/fcoe_sw.c           |   56 +++---
 drivers/scsi/fcoe/libfcoe.c           |  318 ++++++++++++++-------------------
 drivers/scsi/libfc/fc_disc.c          |   63 +++----
 drivers/scsi/libfc/fc_exch.c          |   32 +--
 drivers/scsi/libfc/fc_fcp.c           |   56 +++---
 drivers/scsi/libfc/fc_lport.c         |  173 ++++++++----------
 drivers/scsi/libfc/fc_rport.c         |  197 ++++++++++++--------
 include/scsi/fc/fc_fcoe.h             |    4 
 include/scsi/fc/fc_fs.h               |    5 +
 include/scsi/libfc.h                  |  138 ++++++++------
 include/scsi/libfcoe.h                |    9 -
 12 files changed, 551 insertions(+), 591 deletions(-)

-- 
//Rob

             reply	other threads:[~2009-02-27 18:54 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-27 18:54 Robert Love [this message]
2009-02-27 18:54 ` [PATCH 01/24] libfc: Pass lport in exch_mgr_reset Robert Love
2009-02-27 18:54 ` [PATCH 02/24] libfc: when rport goes away (re-plogi), clean up exchanges to/from rport Robert Love
2009-02-27 18:54 ` [PATCH 03/24] libfc: handle RRQ exch timeout Robert Love
2009-02-27 18:54 ` [PATCH 04/24] libfc: fixed a soft lockup issue in fc_exch_recv_abts Robert Love
2009-02-27 18:54 ` [PATCH 05/24] libfc, fcoe: fixed locking issues with lport->lp_mutex around lport->link_status Robert Love
2009-02-27 18:55 ` [PATCH 06/24] libfc: rport retry on LS_RJT from certain ELS Robert Love
2009-02-27 18:55 ` [PATCH 07/24] libfc: fixed a read IO data integrity issue when a IO data frame lost Robert Love
2009-02-27 18:55 ` [PATCH 08/24] libfc: exch mgr is freed while lport still retrying sequences Robert Love
2009-02-27 18:55 ` [PATCH 09/24] libfc: Don't violate transport template for rogue port creation Robert Love
2009-02-27 18:55 ` [PATCH 10/24] libfc: correct RPORT_TO_PRIV usage Robert Love
2009-02-27 18:55 ` [PATCH 11/24] libfc: rename rp to rdata in fc_disc_new_target() Robert Love
2009-02-27 18:55 ` [PATCH 12/24] libfc: check for err when recv and state is incorrect Robert Love
2009-02-27 18:55 ` [PATCH 13/24] libfc: Cleanup libfc_function_template comments Robert Love
2009-02-27 18:55 ` [PATCH 14/24] libfc, fcoe: Fix kerneldoc comments Robert Love
2009-02-27 18:55 ` [PATCH 15/24] libfc, fcoe: Cleanup function formatting and minor typos Robert Love
2009-02-27 18:55 ` [PATCH 16/24] libfc, fcoe: Remove unnecessary cast by removing inline wrapper Robert Love
2009-02-27 18:56 ` [PATCH 17/24] fcoe: Use setup_timer() and mod_timer() Robert Love
2009-02-27 18:56 ` [PATCH 18/24] fcoe: Correct fcoe_transports initialization vs. registration Robert Love
2009-02-27 18:56 ` [PATCH 19/24] libfc: do not change the fh_rx_id of a recevied frame Robert Love
2009-02-27 18:56 ` [PATCH 20/24] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway Robert Love
2009-02-27 18:56 ` [PATCH 21/24] fcoe: fix kfree(skb) Robert Love
2009-02-27 18:56 ` [PATCH 22/24] fcoe: Out of order tx frames was causing several check condition SCSI status Robert Love
2009-02-27 18:56 ` [PATCH 23/24] fcoe: fix handling of pending queue, prevent out of order frames (v3) Robert Love
2009-02-27 18:56 ` [PATCH 24/24] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20 Robert Love

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090227185430.25509.34309.stgit@fritz \
    --to=robert.w.love@intel.com \
    --cc=james.bottomley@hansenpartnership.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.