From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Pierre Ossman <drzeus-sdhci@drzeus.cx>
Cc: Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
Liu Dave <DaveLiu@freescale.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
sdhci-devel@list.drzeus.cx
Subject: [PATCH 07/11] sdhci: Add set_clock callback and a quirk for nonstandard clocks
Date: Thu, 5 Mar 2009 23:28:42 +0300 [thread overview]
Message-ID: <20090305202842.GG28709@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090305202737.GA24166@oksana.dev.rtsoft.ru>
FSL eSDHC hosts have incompatible register map to manage the SDCLK.
This patch adds set_clock callback so that drivers could overwrite
set_clock behaviour.
Similar patch[1] was posted by Ben Dooks, though in Ben's version the
callback is named change_clock, plus the patch has some unrelated bits
that makes the patch difficult to reuse.
[1] http://lkml.org/lkml/2008/12/2/160
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/mmc/host/sdhci.c | 6 ++++++
drivers/mmc/host/sdhci.h | 4 ++++
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index cca80d3..a476616 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1004,6 +1004,12 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
if (clock == host->clock)
return;
+ if (host->ops->set_clock) {
+ host->ops->set_clock(host, clock);
+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
+ return;
+ }
+
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 34f1849..18a334a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -216,6 +216,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
/* Controller reports inverted write-protect state */
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
+/* Controller has nonstandard clock management */
+#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
@@ -280,6 +282,8 @@ struct sdhci_ops {
void (*writew)(struct sdhci_host *host, u16 val, int reg);
void (*writeb)(struct sdhci_host *host, u8 val, int reg);
+ void (*set_clock)(struct sdhci_host *host, unsigned int clock);
+
int (*enable_dma)(struct sdhci_host *host);
unsigned int (*get_max_clock)(struct sdhci_host *host);
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
--
1.5.6.5
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Pierre Ossman <drzeus-sdhci@drzeus.cx>
Cc: Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
Kumar Gala <galak@kernel.crashing.org>,
Liu Dave <DaveLiu@freescale.com>,
sdhci-devel@list.drzeus.cx, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org
Subject: [PATCH 07/11] sdhci: Add set_clock callback and a quirk for nonstandard clocks
Date: Thu, 5 Mar 2009 23:28:42 +0300 [thread overview]
Message-ID: <20090305202842.GG28709@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090305202737.GA24166@oksana.dev.rtsoft.ru>
FSL eSDHC hosts have incompatible register map to manage the SDCLK.
This patch adds set_clock callback so that drivers could overwrite
set_clock behaviour.
Similar patch[1] was posted by Ben Dooks, though in Ben's version the
callback is named change_clock, plus the patch has some unrelated bits
that makes the patch difficult to reuse.
[1] http://lkml.org/lkml/2008/12/2/160
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/mmc/host/sdhci.c | 6 ++++++
drivers/mmc/host/sdhci.h | 4 ++++
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index cca80d3..a476616 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1004,6 +1004,12 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
if (clock == host->clock)
return;
+ if (host->ops->set_clock) {
+ host->ops->set_clock(host, clock);
+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
+ return;
+ }
+
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 34f1849..18a334a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -216,6 +216,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
/* Controller reports inverted write-protect state */
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
+/* Controller has nonstandard clock management */
+#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
@@ -280,6 +282,8 @@ struct sdhci_ops {
void (*writew)(struct sdhci_host *host, u16 val, int reg);
void (*writeb)(struct sdhci_host *host, u8 val, int reg);
+ void (*set_clock)(struct sdhci_host *host, unsigned int clock);
+
int (*enable_dma)(struct sdhci_host *host);
unsigned int (*get_max_clock)(struct sdhci_host *host);
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
--
1.5.6.5
next prev parent reply other threads:[~2009-03-05 20:28 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-05 20:27 [PATCH v2 0/11] FSL eSDHC support Anton Vorontsov
2009-03-05 20:27 ` Anton Vorontsov
2009-03-05 20:28 ` [PATCH 01/11] sdhci: Add support for bus-specific IO memory accessors Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-05 20:28 ` [PATCH 02/11] sdhci: Split card-detection IRQs management from sdhci_init() Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-05 20:28 ` [PATCH 03/11] sdhci: Enable only relevant (DMA/PIO) interrupts during transfers Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-05 20:28 ` [PATCH 04/11] sdhci: Add support for card-detection polling Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-05 20:28 ` [PATCH 05/11] sdhci: Add support for hosts reporting inverted write-protect state Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-05 20:28 ` [PATCH 06/11] sdhci: Add get_{max,timeout}_clock callbacks Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov [this message]
2009-03-05 20:28 ` [PATCH 07/11] sdhci: Add set_clock callback and a quirk for nonstandard clocks Anton Vorontsov
2009-03-05 20:28 ` [PATCH 08/11] sdhci: Add quirk for controllers that need small delays for PIO Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-05 20:28 ` [PATCH 09/11] sdhci: Add quirk for controllers that need IRQ re-init after reset Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-05 20:28 ` [PATCH 10/11] sdhci: Add quirk for forcing maximum block size to 2048 bytes Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-05 20:28 ` [PATCH 11/11] mmc: Add OpenFirmware bindings for SDHCI driver Anton Vorontsov
2009-03-05 20:28 ` Anton Vorontsov
2009-03-08 14:44 ` Pierre Ossman
2009-03-08 14:44 ` Pierre Ossman
-- strict thread matches above, loose matches on Subject: below --
2009-03-16 21:13 [PATCH v3 0/11] FSL eSDHC support Anton Vorontsov
2009-03-16 21:13 ` [PATCH 07/11] sdhci: Add set_clock callback and a quirk for nonstandard clocks Anton Vorontsov
2009-03-16 21:13 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090305202842.GG28709@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=DaveLiu@freescale.com \
--cc=arnd@arndb.de \
--cc=ben-linux@fluff.org \
--cc=drzeus-sdhci@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=sdhci-devel@list.drzeus.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.