All of lore.kernel.org
 help / color / mirror / Atom feed
* [OMAPZOOM][PATCH] CSI2: Fix to csi2 reset.
@ 2009-03-16  0:12 Dominic Curran
  0 siblings, 0 replies; only message in thread
From: Dominic Curran @ 2009-03-16  0:12 UTC (permalink / raw)
  To: linux-omap

From: Dominic Curran <dcurran@ti.com>
Subject: [OMAPZOOM][PATCH] CSI2: Fix to csi2 reset.

This patch fixes an issue where CSI2 setup is incorrect for the
following scenario:
 QBUF
 STREAMON
 DQBUF
 STREAMOFF
 QBUF
 STREAMON   <- csi2 setup incorrect at power_on
 DQBUF      <- forever wait here

When STREAMOFF occurs then csi2 register setup ends up in an unknown
state.
This patch performs a csi2 reset everytime a PowerOn occurs to get it back into 
know state.

SUMMARY:
board-*.c - Remove the 'if' condition so that csi2 reset is called everytime.

isp.c     - Configuration in isp_csi2_ctx_config_format() depends on
            changes that happen in isp_csi2_ctrl_config_vp_only_enable().
            Thus change order so that isp_csi2_ctrl_config_vp_only_enable()
            is called first.

ispcsi2.c - Clear internal structures at beginning of every reset.


Signed-off-by: Dominic Curran <dcurran@ti.com>
---
 arch/arm/mach-omap2/board-3430sdp.c |    6 ++----
 arch/arm/mach-omap2/board-ldp.c     |    4 ++--
 arch/arm/mach-omap2/board-zoom2.c   |    3 +--
 drivers/media/video/isp/isp.c       |    6 +++---
 drivers/media/video/isp/ispcsi2.c   |    4 ++++
 5 files changed, 12 insertions(+), 11 deletions(-)

Index: omapzoom04/arch/arm/mach-omap2/board-3430sdp.c
===================================================================
--- omapzoom04.orig/arch/arm/mach-omap2/board-3430sdp.c
+++ omapzoom04/arch/arm/mach-omap2/board-3430sdp.c
@@ -835,8 +835,7 @@ static int ov3640_sensor_power_set(enum 
 	switch (power) {
 	case V4L2_POWER_ON:
 		printk(KERN_DEBUG "ov3640_sensor_power_set(ON)\n");
-		if (previous_power == V4L2_POWER_OFF)
-			isp_csi2_reset();
+		isp_csi2_reset();
 
 		lanecfg.clk.pol = OV3640_CSI2_CLOCK_POLARITY;
 		lanecfg.clk.pos = OV3640_CSI2_CLOCK_LANE;
@@ -1019,8 +1018,7 @@ static int imx046_sensor_power_set(enum 
 	case V4L2_POWER_ON:
 		/* Power Up Sequence */
 		printk(KERN_DEBUG "imx046_sensor_power_set(ON)\n");
-		if (previous_power == V4L2_POWER_OFF)
-			isp_csi2_reset();
+		isp_csi2_reset();
 
 		lanecfg.clk.pol = IMX046_CSI2_CLOCK_POLARITY;
 		lanecfg.clk.pos = IMX046_CSI2_CLOCK_LANE;
Index: omapzoom04/arch/arm/mach-omap2/board-ldp.c
===================================================================
--- omapzoom04.orig/arch/arm/mach-omap2/board-ldp.c
+++ omapzoom04/arch/arm/mach-omap2/board-ldp.c
@@ -675,8 +675,8 @@ static int ov3640_sensor_power_set(enum 
 	switch (power) {
 	case V4L2_POWER_ON:
 		printk(KERN_DEBUG "ov3640_sensor_power_set(ON)\n");
-		if (previous_power == V4L2_POWER_OFF)
-			isp_csi2_reset();
+		isp_csi2_reset();
+
 		lanecfg.clk.pol = OV3640_CSI2_CLOCK_POLARITY;
 		lanecfg.clk.pos = OV3640_CSI2_CLOCK_LANE;
 		lanecfg.data[0].pol = OV3640_CSI2_DATA0_POLARITY;
Index: omapzoom04/arch/arm/mach-omap2/board-zoom2.c
===================================================================
--- omapzoom04.orig/arch/arm/mach-omap2/board-zoom2.c
+++ omapzoom04/arch/arm/mach-omap2/board-zoom2.c
@@ -397,8 +397,7 @@ static int imx046_sensor_power_set(enum 
 	case V4L2_POWER_ON:
 		/* Power Up Sequence */
 		printk(KERN_DEBUG "imx046_sensor_power_set(ON)\n");
-		if (previous_power == V4L2_POWER_OFF)
-			isp_csi2_reset();
+		isp_csi2_reset();
 
 		lanecfg.clk.pol = IMX046_CSI2_CLOCK_POLARITY;
 		lanecfg.clk.pos = IMX046_CSI2_CLOCK_LANE;
Index: omapzoom04/drivers/media/video/isp/isp.c
===================================================================
--- omapzoom04.orig/drivers/media/video/isp/isp.c
+++ omapzoom04/drivers/media/video/isp/isp.c
@@ -907,9 +907,6 @@ int isp_configure_interface(struct isp_i
 		ispctrl_val &= ~ISPCTRL_PAR_BRIDGE_BENDIAN;
 		ispctrl_val |= (0x03 << ISPCTRL_PAR_BRIDGE_SHIFT);
 
-		isp_csi2_ctx_config_format(0, config->u.csi.format);
-		isp_csi2_ctx_update(0, false);
-
 		if (config->u.csi.crc)
 			isp_csi2_ctrl_config_ecc_enable(true);
 
@@ -918,6 +915,9 @@ int isp_configure_interface(struct isp_i
 		isp_csi2_ctrl_config_vp_clk_enable(true);
 		isp_csi2_ctrl_update(false);
 
+		isp_csi2_ctx_config_format(0, config->u.csi.format);
+		isp_csi2_ctx_update(0, false);
+
 		isp_csi2_irq_complexio1_set(1);
 		isp_csi2_irq_status_set(1);
 		isp_csi2_irq_set(1);
Index: omapzoom04/drivers/media/video/isp/ispcsi2.c
===================================================================
--- omapzoom04.orig/drivers/media/video/isp/ispcsi2.c
+++ omapzoom04/drivers/media/video/isp/ispcsi2.c
@@ -1966,6 +1966,10 @@ int isp_csi2_reset(void)
 	u8 soft_reset_retries = 0;
 	int i;
 
+	memset(&current_csi2_cfg, 0x00, sizeof(struct isp_csi2_cfg));
+	memset(&current_csi2_cfg_update, 0x00,
+			sizeof(struct isp_csi2_cfg_update));
+
 	reg = omap_readl(ISPCSI2_SYSCONFIG);
 	reg |= ISPCSI2_SYSCONFIG_SOFT_RESET_RESET;
 	omap_writel(reg, ISPCSI2_SYSCONFIG);

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2009-03-16  0:12 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-16  0:12 [OMAPZOOM][PATCH] CSI2: Fix to csi2 reset Dominic Curran

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.