From: Paul Mundt <lethal@linux-sh.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] sh updates for 2.6.30-rc1, part 2.
Date: Sat, 04 Apr 2009 16:03:33 +0000 [thread overview]
Message-ID: <20090404160333.GC17834@linux-sh.org> (raw)
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
Which contains:
Francesco VIRLINZI (1):
sh: Sanitize asm/mmu.h for assembly use.
Kuninori Morimoto (5):
sh: Remove buggy definition from SH7786 pinmux_data[]
sh: urquell: enable LAN device
sh: Tidy up sh7786 pinmux table.
sh: ap325rxa: Add ov772x support, again.
sh: ap325 and Migo-R use new sh_mobile_ceu_info flags
Magnus Damm (6):
clocksource: sh_cmt: use remove_irq() and remove clockevent workaround
sh: intc: install enable, disable and shutdown callbacks
sh: intc: set_irq_wake() support
input: sh_keysc: use enable/disable_irq_wake()
rtc: rtc-sh: use set_irq_wake()
input: migor_ts: add wakeup support
Michael Trimarchi (1):
sh: Fix up DSP context save/restore.
Nobuhiro Iwamatsu (1):
sh: Add MMU dependency for kexec
Paul Mundt (8):
sh: Fix up -Wformat-security whining.
sh: migor: Fix up CEU use flags.
sh: Select ARCH_HIBERNATION_POSSIBLE.
sh: Add a command line option for disabling I/O trapping.
sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
sh: Kill off broken direct-mapped cache mode.
sh: update defconfigs.
sh: Fix up number of on-chip DMA channels on SH7091.
Takashi Yoshii (1):
sh: sh7785lcr: Map whole PCI address space.
Documentation/kernel-parameters.txt | 2 +
arch/sh/Kconfig | 6 +-
arch/sh/boards/board-ap325rxa.c | 57 ++++++-
arch/sh/boards/board-urquell.c | 4 +
arch/sh/boards/mach-migor/setup.c | 4 +-
arch/sh/configs/ap325rxa_defconfig | 70 ++++++---
arch/sh/configs/cayman_defconfig | 235 ++++++++++++++---------------
arch/sh/configs/dreamcast_defconfig | 71 ++++++---
arch/sh/configs/edosk7705_defconfig | 29 +++--
arch/sh/configs/edosk7760_defconfig | 78 +++++++---
arch/sh/configs/espt_defconfig | 39 +++--
arch/sh/configs/hp6xx_defconfig | 54 +++++--
arch/sh/configs/landisk_defconfig | 97 ++++++++----
arch/sh/configs/lboxre2_defconfig | 69 ++++++---
arch/sh/configs/magicpanelr2_defconfig | 73 ++++++---
arch/sh/configs/microdev_defconfig | 74 +++++++---
arch/sh/configs/migor_defconfig | 82 +++++++----
arch/sh/configs/polaris_defconfig | 31 ++--
arch/sh/configs/r7780mp_defconfig | 91 +++++++++---
arch/sh/configs/r7785rp_defconfig | 96 +++++++++---
arch/sh/configs/rsk7201_defconfig | 57 +++++---
arch/sh/configs/rsk7203_defconfig | 94 ++++++++----
arch/sh/configs/rts7751r2d1_defconfig | 83 ++++++++---
arch/sh/configs/rts7751r2dplus_defconfig | 83 ++++++++---
arch/sh/configs/sdk7780_defconfig | 78 +++++++---
arch/sh/configs/se7206_defconfig | 82 +++++++---
arch/sh/configs/se7343_defconfig | 89 ++++++++----
arch/sh/configs/se7619_defconfig | 55 +++++---
arch/sh/configs/se7705_defconfig | 75 +++++++---
arch/sh/configs/se7712_defconfig | 79 +++++++---
arch/sh/configs/se7721_defconfig | 82 +++++++---
arch/sh/configs/se7722_defconfig | 76 +++++++---
arch/sh/configs/se7750_defconfig | 71 ++++++---
arch/sh/configs/se7751_defconfig | 74 +++++++---
arch/sh/configs/se7780_defconfig | 78 +++++++---
arch/sh/configs/sh03_defconfig | 79 +++++++---
arch/sh/configs/sh7710voipgw_defconfig | 69 ++++++---
arch/sh/configs/sh7763rdp_defconfig | 82 +++++++---
arch/sh/configs/sh7785lcr_32bit_defconfig | 42 +++--
arch/sh/configs/sh7785lcr_defconfig | 90 ++++++++----
arch/sh/configs/shmin_defconfig | 73 ++++++---
arch/sh/configs/shx3_defconfig | 99 ++++++++----
arch/sh/configs/snapgear_defconfig | 62 ++++++--
arch/sh/configs/systemh_defconfig | 54 +++++--
arch/sh/configs/titan_defconfig | 101 +++++++++---
arch/sh/configs/ul2_defconfig | 93 +++++++++---
arch/sh/configs/urquell_defconfig | 45 ++++---
arch/sh/drivers/dma/Kconfig | 20 ++-
arch/sh/drivers/pci/ops-sh7785lcr.c | 9 +-
arch/sh/drivers/pci/pci-sh7780.c | 16 +--
arch/sh/include/asm/mmu.h | 35 +++--
arch/sh/include/asm/processor_32.h | 13 ++
arch/sh/include/asm/ptrace.h | 8 -
arch/sh/include/asm/system.h | 1 +
arch/sh/include/asm/system_32.h | 170 +++++++++++++++------
arch/sh/include/cpu-sh4/cpu/sh7786.h | 214 ++++++++++-----------------
arch/sh/kernel/cpu/sh3/entry.S | 85 +----------
arch/sh/kernel/cpu/sh4/probe.c | 5 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 185 +++++------------------
arch/sh/kernel/idle.c | 2 +-
arch/sh/kernel/io_trapped.c | 13 ++
arch/sh/kernel/process_32.c | 14 ++-
arch/sh/kernel/ptrace_32.c | 6 +-
arch/sh/kernel/setup.c | 5 +-
arch/sh/kernel/traps_32.c | 2 +
arch/sh/mm/Kconfig | 12 --
drivers/clocksource/sh_cmt.c | 3 +-
drivers/input/keyboard/sh_keysc.c | 17 ++-
drivers/input/touchscreen/migor_ts.c | 23 +++
drivers/rtc/rtc-sh.c | 36 +++++
drivers/sh/intc.c | 68 +++++++++
71 files changed, 2754 insertions(+), 1515 deletions(-)
WARNING: multiple messages have this Message-ID (diff)
From: Paul Mundt <lethal@linux-sh.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] sh updates for 2.6.30-rc1, part 2.
Date: Sun, 5 Apr 2009 01:03:33 +0900 [thread overview]
Message-ID: <20090404160333.GC17834@linux-sh.org> (raw)
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
Which contains:
Francesco VIRLINZI (1):
sh: Sanitize asm/mmu.h for assembly use.
Kuninori Morimoto (5):
sh: Remove buggy definition from SH7786 pinmux_data[]
sh: urquell: enable LAN device
sh: Tidy up sh7786 pinmux table.
sh: ap325rxa: Add ov772x support, again.
sh: ap325 and Migo-R use new sh_mobile_ceu_info flags
Magnus Damm (6):
clocksource: sh_cmt: use remove_irq() and remove clockevent workaround
sh: intc: install enable, disable and shutdown callbacks
sh: intc: set_irq_wake() support
input: sh_keysc: use enable/disable_irq_wake()
rtc: rtc-sh: use set_irq_wake()
input: migor_ts: add wakeup support
Michael Trimarchi (1):
sh: Fix up DSP context save/restore.
Nobuhiro Iwamatsu (1):
sh: Add MMU dependency for kexec
Paul Mundt (8):
sh: Fix up -Wformat-security whining.
sh: migor: Fix up CEU use flags.
sh: Select ARCH_HIBERNATION_POSSIBLE.
sh: Add a command line option for disabling I/O trapping.
sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
sh: Kill off broken direct-mapped cache mode.
sh: update defconfigs.
sh: Fix up number of on-chip DMA channels on SH7091.
Takashi Yoshii (1):
sh: sh7785lcr: Map whole PCI address space.
Documentation/kernel-parameters.txt | 2 +
arch/sh/Kconfig | 6 +-
arch/sh/boards/board-ap325rxa.c | 57 ++++++-
arch/sh/boards/board-urquell.c | 4 +
arch/sh/boards/mach-migor/setup.c | 4 +-
arch/sh/configs/ap325rxa_defconfig | 70 ++++++---
arch/sh/configs/cayman_defconfig | 235 ++++++++++++++---------------
arch/sh/configs/dreamcast_defconfig | 71 ++++++---
arch/sh/configs/edosk7705_defconfig | 29 +++--
arch/sh/configs/edosk7760_defconfig | 78 +++++++---
arch/sh/configs/espt_defconfig | 39 +++--
arch/sh/configs/hp6xx_defconfig | 54 +++++--
arch/sh/configs/landisk_defconfig | 97 ++++++++----
arch/sh/configs/lboxre2_defconfig | 69 ++++++---
arch/sh/configs/magicpanelr2_defconfig | 73 ++++++---
arch/sh/configs/microdev_defconfig | 74 +++++++---
arch/sh/configs/migor_defconfig | 82 +++++++----
arch/sh/configs/polaris_defconfig | 31 ++--
arch/sh/configs/r7780mp_defconfig | 91 +++++++++---
arch/sh/configs/r7785rp_defconfig | 96 +++++++++---
arch/sh/configs/rsk7201_defconfig | 57 +++++---
arch/sh/configs/rsk7203_defconfig | 94 ++++++++----
arch/sh/configs/rts7751r2d1_defconfig | 83 ++++++++---
arch/sh/configs/rts7751r2dplus_defconfig | 83 ++++++++---
arch/sh/configs/sdk7780_defconfig | 78 +++++++---
arch/sh/configs/se7206_defconfig | 82 +++++++---
arch/sh/configs/se7343_defconfig | 89 ++++++++----
arch/sh/configs/se7619_defconfig | 55 +++++---
arch/sh/configs/se7705_defconfig | 75 +++++++---
arch/sh/configs/se7712_defconfig | 79 +++++++---
arch/sh/configs/se7721_defconfig | 82 +++++++---
arch/sh/configs/se7722_defconfig | 76 +++++++---
arch/sh/configs/se7750_defconfig | 71 ++++++---
arch/sh/configs/se7751_defconfig | 74 +++++++---
arch/sh/configs/se7780_defconfig | 78 +++++++---
arch/sh/configs/sh03_defconfig | 79 +++++++---
arch/sh/configs/sh7710voipgw_defconfig | 69 ++++++---
arch/sh/configs/sh7763rdp_defconfig | 82 +++++++---
arch/sh/configs/sh7785lcr_32bit_defconfig | 42 +++--
arch/sh/configs/sh7785lcr_defconfig | 90 ++++++++----
arch/sh/configs/shmin_defconfig | 73 ++++++---
arch/sh/configs/shx3_defconfig | 99 ++++++++----
arch/sh/configs/snapgear_defconfig | 62 ++++++--
arch/sh/configs/systemh_defconfig | 54 +++++--
arch/sh/configs/titan_defconfig | 101 +++++++++---
arch/sh/configs/ul2_defconfig | 93 +++++++++---
arch/sh/configs/urquell_defconfig | 45 ++++---
arch/sh/drivers/dma/Kconfig | 20 ++-
arch/sh/drivers/pci/ops-sh7785lcr.c | 9 +-
arch/sh/drivers/pci/pci-sh7780.c | 16 +--
arch/sh/include/asm/mmu.h | 35 +++--
arch/sh/include/asm/processor_32.h | 13 ++
arch/sh/include/asm/ptrace.h | 8 -
arch/sh/include/asm/system.h | 1 +
arch/sh/include/asm/system_32.h | 170 +++++++++++++++------
arch/sh/include/cpu-sh4/cpu/sh7786.h | 214 ++++++++++-----------------
arch/sh/kernel/cpu/sh3/entry.S | 85 +----------
arch/sh/kernel/cpu/sh4/probe.c | 5 -
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 185 +++++------------------
arch/sh/kernel/idle.c | 2 +-
arch/sh/kernel/io_trapped.c | 13 ++
arch/sh/kernel/process_32.c | 14 ++-
arch/sh/kernel/ptrace_32.c | 6 +-
arch/sh/kernel/setup.c | 5 +-
arch/sh/kernel/traps_32.c | 2 +
arch/sh/mm/Kconfig | 12 --
drivers/clocksource/sh_cmt.c | 3 +-
drivers/input/keyboard/sh_keysc.c | 17 ++-
drivers/input/touchscreen/migor_ts.c | 23 +++
drivers/rtc/rtc-sh.c | 36 +++++
drivers/sh/intc.c | 68 +++++++++
71 files changed, 2754 insertions(+), 1515 deletions(-)
next reply other threads:[~2009-04-04 16:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-04 16:03 Paul Mundt [this message]
2009-04-04 16:03 ` [GIT PULL] sh updates for 2.6.30-rc1, part 2 Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090404160333.GC17834@linux-sh.org \
--to=lethal@linux-sh.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.