All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Anatolij Gustschin <agust@denx.de>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] powerpc: 85xx: Add PHY fixup to socrates board code
Date: Tue, 7 Apr 2009 18:30:11 +0400	[thread overview]
Message-ID: <20090407143011.GA15727@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <1239113988-4579-1-git-send-email-agust@denx.de>

On Tue, Apr 07, 2009 at 04:19:48PM +0200, Anatolij Gustschin wrote:
> If the firmware missed to initialize the PHY correctly,
> Linux may hang up on socrates while eth0/eth1 interface
> startup (caused by continuous unacknowledged PHY interrupt).
> 
> This patch adds PHY fixup to socrates platform code to
> ensure the PHY is pre-initialized correctly. It is needed
> to be compatible with older firmware.

Is that really board-specific fixup, or can it be placed
somewhere inside drivers/net/phy/marvell.c?

Has this fixup any effect after phy power down/up sequence?
Otherwise you may encounter same problem after suspend/resume.

> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  arch/powerpc/platforms/85xx/socrates.c |   18 ++++++++++++++++++
>  1 files changed, 18 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
> index d0e8443..2275a39 100644
> --- a/arch/powerpc/platforms/85xx/socrates.c
> +++ b/arch/powerpc/platforms/85xx/socrates.c
> @@ -28,6 +28,7 @@
>  #include <linux/delay.h>
>  #include <linux/seq_file.h>
>  #include <linux/of_platform.h>
> +#include <linux/phy.h>
>  
>  #include <asm/system.h>
>  #include <asm/time.h>
> @@ -78,6 +79,21 @@ static void __init socrates_pic_init(void)
>  	of_node_put(np);
>  }
>  
> +static int socrates_m88e1121_fixup(struct phy_device *phydev)
> +{
> +	int err;
> +
> +	err = phy_write(phydev, 0x12, 0);

Do you know the proper names for 0x12 and 0x13 registers
on that chip?

> +	if (err < 0)
> +		return err;
> +
> +	err = phy_read(phydev, 0x13);
> +	if (err < 0)
> +		return err;
> +
> +	return 0;
> +}
> +
>  /*
>   * Setup the architecture
>   */
> @@ -105,6 +121,8 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = {
>  static void __init socrates_init(void)
>  {
>  	of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
> +	phy_register_fixup_for_uid(0x1410cb0, 0xffffff0,
> +				   socrates_m88e1121_fixup);
>  }
>  
>  /*
> -- 
> 1.5.6.3

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2

  reply	other threads:[~2009-04-07 14:30 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-07 14:19 [PATCH] powerpc: 85xx: Add PHY fixup to socrates board code Anatolij Gustschin
2009-04-07 14:30 ` Anton Vorontsov [this message]
2009-04-07 17:24   ` Anatolij Gustschin
2009-04-07 18:09     ` Anton Vorontsov
2009-04-07 18:40       ` Anton Vorontsov
2009-04-21 17:19 ` [PATCH v2] " Anatolij Gustschin
2009-04-21 21:54   ` Kumar Gala
2009-04-21 22:04     ` Kumar Gala
2009-04-21 23:24       ` Anatolij Gustschin
2009-06-16 13:46         ` Kumar Gala
2009-06-23 10:15           ` Anatolij Gustschin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090407143011.GA15727@oksana.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=agust@denx.de \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.