All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ming Lei <tom.leiming-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: David VomLehn <dvomlehn-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org,
	linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	arjan-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org
Subject: Re: [PATCH 5/5] initdev:kernel: USB and SCSI block init device notification, v3
Date: Sat, 2 May 2009 11:55:39 +0800	[thread overview]
Message-ID: <20090502115539.396206bc@linux-lm> (raw)
In-Reply-To: <20090502023000.GA16076-CFZJ1or75eBPWxJt6d6B6bQa8qPdvLwY@public.gmane.org>

On Fri, 1 May 2009 19:30:00 -0700
David VomLehn <dvomlehn-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org> wrote:

> From: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org
> 
> Add notification of device discovery for USB and SCSI block devices.
> 
> History
> v3	Change bootdev_* to initdev_*
> v2	Correct location of call to bootdev_found
> v1	Initial version
> 
> Signed-off-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org
> Signed-off-by: David VomLehn <dvomlehn-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
> ---
>  drivers/scsi/scsi_scan.c  |    2 ++
>  drivers/usb/storage/usb.c |    3 +++
>  2 files changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> index 6f51ca4..735b061 100644
> --- a/drivers/scsi/scsi_scan.c
> +++ b/drivers/scsi/scsi_scan.c
> @@ -1834,6 +1834,7 @@ static int do_scan_async(void *_data)
>  	struct async_scan_data *data = _data;
>  	do_scsi_scan_host(data->shost);
>  	scsi_finish_async_scan(data);
> +	initdev_probe_done(BOOTDEV_BLOCK_MASK);

Which code are waiting for the block device's probe done?


>  	return 0;
>  }
>  
> @@ -1855,6 +1856,7 @@ void scsi_scan_host(struct Scsi_Host *shost)
>  		return;
>  	}
>  
> +	initdev_found(BOOTDEV_BLOCK_MASK);
>  	p = kthread_run(do_scan_async, data, "scsi_scan_%d",
> shost->host_no); if (IS_ERR(p))
>  		do_scan_async(data);
> diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
> index 8060b85..ea7abab 100644
> --- a/drivers/usb/storage/usb.c
> +++ b/drivers/usb/storage/usb.c
> @@ -837,6 +837,7 @@ static int usb_stor_scan_thread(void * __us)
>  		/* Should we unbind if no devices were detected? */
>  	}
>  
> +	initdev_probe_done(BOOTDEV_BLOCK_MASK);

the same question with above.

>  	complete_and_exit(&us->scanning_done, 0);
>  }
>  
> @@ -937,10 +938,12 @@ int usb_stor_probe2(struct us_data *us)
>  	}
>  
>  	/* Start up the thread for delayed SCSI-device scanning */
> +	initdev_found(BOOTDEV_BLOCK_MASK);
>  	th = kthread_create(usb_stor_scan_thread, us,
> "usb-stor-scan"); if (IS_ERR(th)) {
>  		printk(KERN_WARNING USB_STORAGE 
>  		       "Unable to start the device-scanning
> thread\n");
> +		initdev_probe_done(BOOTDEV_BLOCK_MASK);

the same question with above.

>  		complete(&us->scanning_done);
>  		quiesce_and_remove_host(us);
>  		result = PTR_ERR(th);
> --


-- 
Lei Ming
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Ming Lei <tom.leiming@gmail.com>
To: David VomLehn <dvomlehn@cisco.com>
Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
	linux-usb@vger.kernel.org, greg@kroah.com,
	linux-scsi@vger.kernel.org, netdev@vger.kernel.org,
	arjan@infradead.org
Subject: Re: [PATCH 5/5] initdev:kernel: USB and SCSI block init device notification, v3
Date: Sat, 2 May 2009 11:55:39 +0800	[thread overview]
Message-ID: <20090502115539.396206bc@linux-lm> (raw)
In-Reply-To: <20090502023000.GA16076@cuplxvomd02.corp.sa.net>

On Fri, 1 May 2009 19:30:00 -0700
David VomLehn <dvomlehn@cisco.com> wrote:

> From: Alan Stern <stern@rowland.harvard.edu
> 
> Add notification of device discovery for USB and SCSI block devices.
> 
> History
> v3	Change bootdev_* to initdev_*
> v2	Correct location of call to bootdev_found
> v1	Initial version
> 
> Signed-off-by: Alan Stern <stern@rowland.harvard.edu
> Signed-off-by: David VomLehn <dvomlehn@cisco.com>
> ---
>  drivers/scsi/scsi_scan.c  |    2 ++
>  drivers/usb/storage/usb.c |    3 +++
>  2 files changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> index 6f51ca4..735b061 100644
> --- a/drivers/scsi/scsi_scan.c
> +++ b/drivers/scsi/scsi_scan.c
> @@ -1834,6 +1834,7 @@ static int do_scan_async(void *_data)
>  	struct async_scan_data *data = _data;
>  	do_scsi_scan_host(data->shost);
>  	scsi_finish_async_scan(data);
> +	initdev_probe_done(BOOTDEV_BLOCK_MASK);

Which code are waiting for the block device's probe done?


>  	return 0;
>  }
>  
> @@ -1855,6 +1856,7 @@ void scsi_scan_host(struct Scsi_Host *shost)
>  		return;
>  	}
>  
> +	initdev_found(BOOTDEV_BLOCK_MASK);
>  	p = kthread_run(do_scan_async, data, "scsi_scan_%d",
> shost->host_no); if (IS_ERR(p))
>  		do_scan_async(data);
> diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
> index 8060b85..ea7abab 100644
> --- a/drivers/usb/storage/usb.c
> +++ b/drivers/usb/storage/usb.c
> @@ -837,6 +837,7 @@ static int usb_stor_scan_thread(void * __us)
>  		/* Should we unbind if no devices were detected? */
>  	}
>  
> +	initdev_probe_done(BOOTDEV_BLOCK_MASK);

the same question with above.

>  	complete_and_exit(&us->scanning_done, 0);
>  }
>  
> @@ -937,10 +938,12 @@ int usb_stor_probe2(struct us_data *us)
>  	}
>  
>  	/* Start up the thread for delayed SCSI-device scanning */
> +	initdev_found(BOOTDEV_BLOCK_MASK);
>  	th = kthread_create(usb_stor_scan_thread, us,
> "usb-stor-scan"); if (IS_ERR(th)) {
>  		printk(KERN_WARNING USB_STORAGE 
>  		       "Unable to start the device-scanning
> thread\n");
> +		initdev_probe_done(BOOTDEV_BLOCK_MASK);

the same question with above.

>  		complete(&us->scanning_done);
>  		quiesce_and_remove_host(us);
>  		result = PTR_ERR(th);
> --


-- 
Lei Ming

  parent reply	other threads:[~2009-05-02  3:55 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-02  2:30 [PATCH 5/5] initdev:kernel: USB and SCSI block init device notification, v3 David VomLehn
     [not found] ` <20090502023000.GA16076-CFZJ1or75eBPWxJt6d6B6bQa8qPdvLwY@public.gmane.org>
2009-05-02  3:55   ` Ming Lei [this message]
2009-05-02  3:55     ` Ming Lei
2009-05-05  0:19     ` David VomLehn
     [not found]       ` <20090505001950.GC29124-CFZJ1or75eBPWxJt6d6B6bQa8qPdvLwY@public.gmane.org>
2009-05-05  4:05         ` Ming Lei
2009-05-05  4:05           ` Ming Lei
2009-06-05 17:55           ` David VomLehn
2009-06-05 17:55             ` David VomLehn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090502115539.396206bc@linux-lm \
    --to=tom.leiming-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
    --cc=arjan-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=dvomlehn-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \
    --cc=greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.