* v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
@ 2009-05-03 16:22 Francis Moreau
2009-05-03 16:28 ` Florian Fainelli
0 siblings, 1 reply; 9+ messages in thread
From: Francis Moreau @ 2009-05-03 16:22 UTC (permalink / raw)
To: Linux Kernel Mailing List
Hello,
I got this since I updated my kernel from 2.6.29 to 2.6.30-rc4.
Let me know if you need more information.
thanks
--
Francis
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
2009-05-03 16:22 v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear Francis Moreau
@ 2009-05-03 16:28 ` Florian Fainelli
2009-05-03 17:12 ` Francis Moreau
0 siblings, 1 reply; 9+ messages in thread
From: Florian Fainelli @ 2009-05-03 16:28 UTC (permalink / raw)
To: Francis Moreau, netdev; +Cc: Linux Kernel Mailing List
Hi Francis,
(CC'ing netdev)
Le Sunday 03 May 2009 18:22:18 Francis Moreau, vous avez écrit :
> Hello,
>
> I got this since I updated my kernel from 2.6.29 to 2.6.30-rc4.
>
> Let me know if you need more information.
Is this seen on a Broadcom 47xx/53xx platform or on a computer with a PCI b44
card ?
Thanks.
--
Best regards, Florian Fainelli
Email : florian@openwrt.org
http://openwrt.org
-------------------------------
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
2009-05-03 16:28 ` Florian Fainelli
@ 2009-05-03 17:12 ` Francis Moreau
0 siblings, 0 replies; 9+ messages in thread
From: Francis Moreau @ 2009-05-03 17:12 UTC (permalink / raw)
To: Florian Fainelli; +Cc: netdev, Linux Kernel Mailing List
Hello Florian,
On Sun, May 3, 2009 at 6:28 PM, Florian Fainelli <florian@openwrt.org> wrote:
>> I got this since I updated my kernel from 2.6.29 to 2.6.30-rc4.
>>
>> Let me know if you need more information.
>
> Is this seen on a Broadcom 47xx/53xx platform or on a computer with a PCI b44
> card ?
>
$ lspci -vv
06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0090
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
Let me know if you need more details.
Thanks
--
Francis
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
@ 2009-05-03 17:12 ` Francis Moreau
0 siblings, 0 replies; 9+ messages in thread
From: Francis Moreau @ 2009-05-03 17:12 UTC (permalink / raw)
To: Florian Fainelli; +Cc: netdev, Linux Kernel Mailing List
Hello Florian,
On Sun, May 3, 2009 at 6:28 PM, Florian Fainelli <florian@openwrt.org> wrote:
>> I got this since I updated my kernel from 2.6.29 to 2.6.30-rc4.
>>
>> Let me know if you need more information.
>
> Is this seen on a Broadcom 47xx/53xx platform or on a computer with a PCI b44
> card ?
>
$ lspci -vv
06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Acer Incorporated [ALI] Device 0090
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
Let me know if you need more details.
Thanks
--
Francis
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
2009-05-03 17:12 ` Francis Moreau
(?)
@ 2009-05-15 21:50 ` Rafael J. Wysocki
2009-05-16 9:42 ` Maciej Rutecki
2009-05-16 12:28 ` Francis Moreau
-1 siblings, 2 replies; 9+ messages in thread
From: Rafael J. Wysocki @ 2009-05-15 21:50 UTC (permalink / raw)
To: Francis Moreau; +Cc: Florian Fainelli, netdev, Linux Kernel Mailing List
On Sunday 03 May 2009, Francis Moreau wrote:
> Hello Florian,
>
> On Sun, May 3, 2009 at 6:28 PM, Florian Fainelli <florian@openwrt.org> wrote:
> >> I got this since I updated my kernel from 2.6.29 to 2.6.30-rc4.
> >>
> >> Let me know if you need more information.
> >
> > Is this seen on a Broadcom 47xx/53xx platform or on a computer with a PCI b44
> > card ?
> >
>
> $ lspci -vv
>
> 06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
> Subsystem: Acer Incorporated [ALI] Device 0090
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
> Kernel driver in use: b44
>
>
> Let me know if you need more details.
Can anyone please tell me what the status of this report is?
Rafael
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
2009-05-15 21:50 ` Rafael J. Wysocki
@ 2009-05-16 9:42 ` Maciej Rutecki
2009-05-16 12:28 ` Francis Moreau
1 sibling, 0 replies; 9+ messages in thread
From: Maciej Rutecki @ 2009-05-16 9:42 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Francis Moreau, Florian Fainelli, netdev,
Linux Kernel Mailing List
2009/5/15 Rafael J. Wysocki <rjw@sisk.pl>:
> On Sunday 03 May 2009, Francis Moreau wrote:
>> Hello Florian,
>>
>> On Sun, May 3, 2009 at 6:28 PM, Florian Fainelli <florian@openwrt.org> wrote:
>> >> I got this since I updated my kernel from 2.6.29 to 2.6.30-rc4.
>> >>
>> >> Let me know if you need more information.
>> >
>> > Is this seen on a Broadcom 47xx/53xx platform or on a computer with a PCI b44
>> > card ?
>> >
>>
>> $ lspci -vv
>>
>> 06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
>> Subsystem: Acer Incorporated [ALI] Device 0090
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 64
>> Interrupt: pin A routed to IRQ 21
>> Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=8K]
>> Capabilities: <access denied>
>> Kernel driver in use: b44
>>
>>
>> Let me know if you need more details.
>
> Can anyone please tell me what the status of this report is?
>
Hmm. I also have this message in dmesg when always back to Linux from
Windows XP, but only in this case and as long as I remember.
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Regards
--
Maciej Rutecki
http://www.maciek.unixy.pl
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
@ 2009-05-16 9:42 ` Maciej Rutecki
0 siblings, 0 replies; 9+ messages in thread
From: Maciej Rutecki @ 2009-05-16 9:42 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Francis Moreau, Florian Fainelli, netdev,
Linux Kernel Mailing List
2009/5/15 Rafael J. Wysocki <rjw@sisk.pl>:
> On Sunday 03 May 2009, Francis Moreau wrote:
>> Hello Florian,
>>
>> On Sun, May 3, 2009 at 6:28 PM, Florian Fainelli <florian@openwrt.org> wrote:
>> >> I got this since I updated my kernel from 2.6.29 to 2.6.30-rc4.
>> >>
>> >> Let me know if you need more information.
>> >
>> > Is this seen on a Broadcom 47xx/53xx platform or on a computer with a PCI b44
>> > card ?
>> >
>>
>> $ lspci -vv
>>
>> 06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
>> Subsystem: Acer Incorporated [ALI] Device 0090
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 64
>> Interrupt: pin A routed to IRQ 21
>> Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=8K]
>> Capabilities: <access denied>
>> Kernel driver in use: b44
>>
>>
>> Let me know if you need more details.
>
> Can anyone please tell me what the status of this report is?
>
Hmm. I also have this message in dmesg when always back to Linux from
Windows XP, but only in this case and as long as I remember.
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Regards
--
Maciej Rutecki
http://www.maciek.unixy.pl
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
2009-05-15 21:50 ` Rafael J. Wysocki
@ 2009-05-16 12:28 ` Francis Moreau
2009-05-16 12:28 ` Francis Moreau
1 sibling, 0 replies; 9+ messages in thread
From: Francis Moreau @ 2009-05-16 12:28 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: Florian Fainelli, netdev, Linux Kernel Mailing List
Hello,
On Fri, May 15, 2009 at 11:50 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>
> Can anyone please tell me what the status of this report is?
>
AFAIK, it's still open and unresolved.
thanks
--
Francis
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2009-05-16 12:28 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-05-03 16:22 v2.6.30-rc4: b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear Francis Moreau
2009-05-03 16:28 ` Florian Fainelli
2009-05-03 17:12 ` Francis Moreau
2009-05-03 17:12 ` Francis Moreau
2009-05-15 21:50 ` Rafael J. Wysocki
2009-05-16 9:42 ` Maciej Rutecki
2009-05-16 9:42 ` Maciej Rutecki
2009-05-16 12:28 ` Francis Moreau
2009-05-16 12:28 ` Francis Moreau
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.