All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: bzolnier@gmail.com
Cc: linux-ide@vger.kernel.org
Subject: [PATCH 1/9] cmd64x: implement clear_irq() method
Date: Wed, 10 Jun 2009 22:44:45 +0400	[thread overview]
Message-ID: <200906102244.46334.sshtylyov@ru.mvista.com> (raw)
In-Reply-To: <200702140101.26639.sshtylyov@ru.mvista.com>

Convert the driver's two dma_end() methods into clear_irq() methods -- the
driver will now use the standard dma_end() method implementation, ide_dma_end().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

---
The patch is atop of ide-2.6.git 'for-next' branch.

 drivers/ide/cmd64x.c |   31 +++++++++++++++++--------------
 1 files changed, 17 insertions(+), 14 deletions(-)

Index: ide-2.6/drivers/ide/cmd64x.c
===================================================================
--- ide-2.6.orig/drivers/ide/cmd64x.c
+++ ide-2.6/drivers/ide/cmd64x.c
@@ -7,7 +7,7 @@
  * Copyright (C) 1998		David S. Miller (davem@redhat.com)
  *
  * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2007		MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007,2009	MontaVista Software, Inc. <source@mvista.com>
  */
 
 #include <linux/module.h>
@@ -226,11 +226,10 @@ static void cmd64x_set_dma_mode(ide_driv
 		(void) pci_write_config_byte(dev, pciU, regU);
 }
 
-static int cmd648_dma_end(ide_drive_t *drive)
+static void cmd648_clear_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
-	int err			= ide_dma_end(drive);
 	u8  irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
 						  MRDMODE_INTR_CH0;
 	u8  mrdmode		= inb(base + 1);
@@ -238,11 +237,9 @@ static int cmd648_dma_end(ide_drive_t *d
 	/* clear the interrupt bit */
 	outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
 	     base + 1);
-
-	return err;
 }
 
-static int cmd64x_dma_end(ide_drive_t *drive)
+static void cmd64x_clear_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
@@ -250,13 +247,10 @@ static int cmd64x_dma_end(ide_drive_t *d
 	u8  irq_mask		= hwif->channel ? ARTTIM23_INTR_CH1 :
 						  CFR_INTR_CH0;
 	u8  irq_stat		= 0;
-	int err			= ide_dma_end(drive);
 
 	(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
 	/* clear the interrupt bit */
 	(void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask);
-
-	return err;
 }
 
 static int cmd648_dma_test_irq(ide_drive_t *drive)
@@ -370,6 +364,14 @@ static u8 cmd64x_cable_detect(ide_hwif_t
 static const struct ide_port_ops cmd64x_port_ops = {
 	.set_pio_mode		= cmd64x_set_pio_mode,
 	.set_dma_mode		= cmd64x_set_dma_mode,
+	.clear_irq		= cmd64x_clear_irq,
+	.cable_detect		= cmd64x_cable_detect,
+};
+
+static const struct ide_port_ops cmd648_port_ops = {
+	.set_pio_mode		= cmd64x_set_pio_mode,
+	.set_dma_mode		= cmd64x_set_dma_mode,
+	.clear_irq		= cmd648_clear_irq,
 	.cable_detect		= cmd64x_cable_detect,
 };
 
@@ -377,7 +379,7 @@ static const struct ide_dma_ops cmd64x_d
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
 	.dma_start		= ide_dma_start,
-	.dma_end		= cmd64x_dma_end,
+	.dma_end		= ide_dma_end,
 	.dma_test_irq		= cmd64x_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
@@ -399,7 +401,7 @@ static const struct ide_dma_ops cmd648_d
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
 	.dma_start		= ide_dma_start,
-	.dma_end		= cmd648_dma_end,
+	.dma_end		= ide_dma_end,
 	.dma_test_irq		= cmd648_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
@@ -423,7 +425,7 @@ static const struct ide_port_info cmd64x
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
+		.port_ops	= &cmd648_port_ops,
 		.dma_ops	= &cmd648_dma_ops,
 		.host_flags	= IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_ABUSE_PREFETCH,
@@ -435,7 +437,7 @@ static const struct ide_port_info cmd64x
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
+		.port_ops	= &cmd648_port_ops,
 		.dma_ops	= &cmd648_dma_ops,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
@@ -446,7 +448,7 @@ static const struct ide_port_info cmd64x
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
+		.port_ops	= &cmd648_port_ops,
 		.dma_ops	= &cmd648_dma_ops,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
@@ -484,6 +486,7 @@ static int __devinit cmd64x_init_one(str
 			 */
 			if (dev->revision < 3) {
 				d.enablebits[0].reg = 0;
+				d.port_ops = &cmd64x_port_ops;
 				if (dev->revision == 1)
 					d.dma_ops = &cmd646_rev1_dma_ops;
 				else


  parent reply	other threads:[~2009-06-10 18:43 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-13 22:01 [PATCH] (pata-2.6 fix queue) sl82c105: rework PIO support Sergei Shtylyov
2007-02-14 19:48 ` Bartlomiej Zolnierkiewicz
2007-03-28 17:47 ` [PATCH pata-2.6] sl82c105: rework PIO support (take 2) Sergei Shtylyov
2007-03-28 18:06   ` Sergei Shtylyov
2007-04-04 19:33     ` Bartlomiej Zolnierkiewicz
2007-04-04 19:42       ` Sergei Shtylyov
2007-04-04 19:24   ` Bartlomiej Zolnierkiewicz
2009-06-08 17:46 ` [PATCH] sl82c105: add printk() logging facility Sergei Shtylyov
2009-06-08 19:56   ` Bartlomiej Zolnierkiewicz
2009-06-10 18:44 ` Sergei Shtylyov [this message]
2009-06-12 16:16   ` [PATCH 1/9] cmd64x: implement clear_irq() method Bartlomiej Zolnierkiewicz
2009-06-12 18:39     ` Sergei Shtylyov
2009-06-12 19:01       ` Bartlomiej Zolnierkiewicz
2009-06-12 19:13         ` Sergei Shtylyov
2009-06-12 19:38           ` Bartlomiej Zolnierkiewicz
2009-06-12 20:04             ` Sergei Shtylyov
2009-06-10 18:47 ` [PATCH 2/9] ide: call clear_irq() method in ide_timer_expiry() Sergei Shtylyov
2009-06-10 18:50 ` [PATCH 3/9] ide: move IRQ clearing from ack_intr() method to clear_irq() method Sergei Shtylyov
2009-06-12 16:18   ` Bartlomiej Zolnierkiewicz
2009-06-12 18:24     ` Sergei Shtylyov
2009-06-12 18:48       ` Bartlomiej Zolnierkiewicz
2009-06-12 19:07         ` Sergei Shtylyov
2009-06-12 19:17           ` Sergei Shtylyov
2009-06-12 19:25           ` Bartlomiej Zolnierkiewicz
2009-06-10 18:51 ` [PATCH 4/9] ide: move ack_intr() method into 'struct ide_port_ops' Sergei Shtylyov
2009-06-12 16:19   ` Bartlomiej Zolnierkiewicz
2009-06-12 19:24     ` Sergei Shtylyov
2009-06-10 18:58 ` [PATCH 5/9] cmd640: implement test_irq() method Sergei Shtylyov
2009-06-10 18:59 ` [PATCH 6/9] cmd64x: " Sergei Shtylyov
2009-06-10 19:01 ` [PATCH 7/9] pdc202xx_old: " Sergei Shtylyov
2009-06-12 16:20   ` Bartlomiej Zolnierkiewicz
2009-06-12 19:31     ` Sergei Shtylyov
2009-06-10 19:05 ` [PATCH 8/9] siimage: " Sergei Shtylyov
2009-06-10 20:47   ` Sergei Shtylyov
2009-06-11 18:39     ` [PATCH 7.5/9] siimage: use ide_dma_test_irq() Sergei Shtylyov
2009-06-12 16:22       ` Bartlomiej Zolnierkiewicz
2009-06-12 19:32         ` Sergei Shtylyov
2009-06-11 18:41     ` [PATCH 8/9] siimage: implement test_irq() method Sergei Shtylyov
2009-06-13 13:30     ` [PATCH 3/10] siimage: use ide_dma_test_irq() (take 2) Sergei Shtylyov
2009-06-10 19:06 ` [PATCH 9/9] sl82c105: implement test_irq() method Sergei Shtylyov
2009-06-11 17:54 ` [PATCH] sgiioc4: coding style cleanup Sergei Shtylyov
2009-06-15 16:32   ` Bartlomiej Zolnierkiewicz
2009-06-13 13:29 ` [PATCH 1/10] ide: call clear_irq() method in ide_timer_expiry() Sergei Shtylyov
2009-06-15 16:41   ` Bartlomiej Zolnierkiewicz
2009-06-13 13:30 ` [PATCH 2/10] cmd64x: implement clear_irq() method (take 2) Sergei Shtylyov
2009-06-13 13:31 ` [PATCH 4/10] ide: move IRQ clearing from ack_intr() method to " Sergei Shtylyov
2009-06-13 13:31 ` [PATCH 5/10] ide: move ack_intr() method into 'struct ide_port_ops' " Sergei Shtylyov
2009-06-13 16:15   ` Finn Thain
2009-06-14  3:37     ` Finn Thain
2009-06-13 13:34 ` [PATCH 6/10] cmd640: implement test_irq() method Sergei Shtylyov
2009-06-13 13:35 ` [PATCH 7/10] cmd64x: " Sergei Shtylyov
2009-06-13 13:38 ` [PATCH 8/10] pdc202xx_old: implement test_irq() method (take 2) Sergei Shtylyov
2010-04-12 21:07   ` Sergei Shtylyov
2009-06-13 13:38 ` [PATCH 9/10] siimage: implement test_irq() method Sergei Shtylyov
2009-06-13 13:39 ` [PATCH 10/10] sl82c105: " Sergei Shtylyov
2009-10-09 13:36 ` [PATCH] hpt366: kill unused #define's Sergei Shtylyov
2009-10-29 10:09   ` David Miller
2009-11-20 18:52 ` [PATCH] hpt366: add debounce delay to cable_detect() method Sergei Shtylyov
2009-11-20 19:45   ` Alan Cox
2009-12-07 14:57   ` Sergei Shtylyov
2010-09-25 16:49     ` Sergei Shtylyov
2009-12-07 15:03 ` [PATCH] hpt366: fix clock turnaround Sergei Shtylyov
2010-09-25 16:40   ` Sergei Shtylyov
2010-09-25 21:39     ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200906102244.46334.sshtylyov@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.