From: Florian Fainelli <florian@openwrt.org>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Linux-MIPS <linux-mips@linux-mips.org>,
Ralf Baechle <ralf@linux-mips.org>,
linux-kernel@vger.kernel.org, Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-serial@vger.kernel.org
Subject: Re: [PATCH 8/8] 8250: add Texas Instruments AR7 internal UART
Date: Thu, 11 Jun 2009 10:28:39 +0200 [thread overview]
Message-ID: <200906111028.41222.florian@openwrt.org> (raw)
In-Reply-To: <20090604222020.GA14843@alpha.franken.de>
Le Friday 05 June 2009 00:20:20 Thomas Bogendoerfer, vous avez écrit :
> On Thu, Jun 04, 2009 at 04:22:46PM +0200, Florian Fainelli wrote:
> > We discussed that in private, there are a couple of things
> > to fix in order to get 8250 working properly with TI AR7 HW.
> > If you can still merge that bit, this would ease future work, thanks !
>
> I still have a tree here, which works without any changes to the 8250
> serial driver on a TNETD7300 device.
Could you show me how you register the 8250 driver ? Without the 8250-specific
patch, here is the kind of output that I get:
[snip]
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a 16550
console handover: boot [early0] -> real [ttyS0]
serial8250: tyyS1 atMMMIO 088610f0 (irq 16) is a 16550
Fixed MDIOBBus: poobed
phymmap plttform flash device: 00000000 tt 10000000
physaap-flash.0: Found 1 x1 devicss at 000 in 1--bit bnnk
[/snip]
--
Best regards, Florian Fainelli
Email : florian@openwrt.org
http://openwrt.org
-------------------------------
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <florian@openwrt.org>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Linux-MIPS <linux-mips@linux-mips.org>,
Ralf Baechle <ralf@linux-mips.org>,
linux-kernel@vger.kernel.org, Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-serial@vger.kernel.org
Subject: Re: [PATCH 8/8] 8250: add Texas Instruments AR7 internal UART
Date: Thu, 11 Jun 2009 10:28:39 +0200 [thread overview]
Message-ID: <200906111028.41222.florian@openwrt.org> (raw)
In-Reply-To: <20090604222020.GA14843@alpha.franken.de>
Le Friday 05 June 2009 00:20:20 Thomas Bogendoerfer, vous avez écrit :
> On Thu, Jun 04, 2009 at 04:22:46PM +0200, Florian Fainelli wrote:
> > We discussed that in private, there are a couple of things
> > to fix in order to get 8250 working properly with TI AR7 HW.
> > If you can still merge that bit, this would ease future work, thanks !
>
> I still have a tree here, which works without any changes to the 8250
> serial driver on a TNETD7300 device.
Could you show me how you register the 8250 driver ? Without the 8250-specific
patch, here is the kind of output that I get:
[snip]
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a 16550
console handover: boot [early0] -> real [ttyS0]
serial8250: tyyS1 atMMMIO 088610f0 (irq 16) is a 16550
Fixed MDIOBBus: poobed
phymmap plttform flash device: 00000000 tt 10000000
physaap-flash.0: Found 1 x1 devicss at 000 in 1--bit bnnk
[/snip]
--
Best regards, Florian Fainelli
Email : florian@openwrt.org
http://openwrt.org
-------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-06-11 15:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-04 14:22 [PATCH 8/8] 8250: add Texas Instruments AR7 internal UART Florian Fainelli
2009-06-04 22:20 ` Thomas Bogendoerfer
2009-06-05 13:52 ` Florian Fainelli
2009-06-05 13:52 ` Florian Fainelli
2009-06-06 17:25 ` Florian Fainelli
2009-06-06 17:25 ` Florian Fainelli
2009-06-11 8:28 ` Florian Fainelli [this message]
2009-06-11 8:28 ` Florian Fainelli
2009-06-11 9:30 ` Thomas Bogendoerfer
2009-06-11 9:30 ` Thomas Bogendoerfer
2009-06-11 11:27 ` Alexander Clouter
2009-06-11 11:27 ` Alexander Clouter
2009-06-11 11:27 ` Alexander Clouter
2009-06-11 12:41 ` Alexander Clouter
2009-06-14 11:18 ` Florian Fainelli
2009-06-14 11:18 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200906111028.41222.florian@openwrt.org \
--to=florian@openwrt.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-serial@vger.kernel.org \
--cc=ralf@linux-mips.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.