From: Ingo Molnar <mingo@elte.hu>
To: Pekka J Enberg <penberg@cs.helsinki.fi>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
cl@linux-foundation.org, hannes@cmpxchg.org, mpm@selenic.com,
npiggin@suse.de, yinghai@kernel.org
Subject: Re: [GIT PULL v2] Early boot SLAB for 2.6.31
Date: Thu, 11 Jun 2009 13:40:32 +0200 [thread overview]
Message-ID: <20090611114032.GA8856@elte.hu> (raw)
In-Reply-To: <20090611113512.GA6971@elte.hu>
[-- Attachment #1: Type: text/plain, Size: 2086 bytes --]
* Ingo Molnar <mingo@elte.hu> wrote:
> > are available in the git repository at:
> >
> > ssh://master.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6
> > for-linus
>
> Thanks Pekka for sorting this out - this tree looks nice and it
> does not conflict with anything we have pending. I started testing
> it on 6 boxes - if you dont hear from me within a few hours it's
> all fine.
Hm, with this pulled on a testbox i'm still getting:
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x40/0x7e()
[ 0.000000] Hardware name: To Be Filled By O.E.M.
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #59709
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff823f8c8e>] ? alloc_arch_preferred_bootmem+0x40/0x7e
[ 0.000000] [<ffffffff81067168>] warn_slowpath_common+0x88/0xcb
[ 0.000000] [<ffffffff810671d2>] warn_slowpath_null+0x27/0x3d
[ 0.000000] [<ffffffff823f8c8e>] alloc_arch_preferred_bootmem+0x40/0x7e
[ 0.000000] [<ffffffff823f9307>] ___alloc_bootmem_nopanic+0x4e/0xec
[ 0.000000] [<ffffffff823f93c5>] ___alloc_bootmem+0x20/0x61
[ 0.000000] [<ffffffff823f962e>] __alloc_bootmem+0x1e/0x34
[ 0.000000] [<ffffffff823f757c>] early_irq_init+0x6d/0x118
[ 0.000000] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[ 0.000000] [<ffffffff823e0cf7>] start_kernel+0x192/0x394
[ 0.000000] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[ 0.000000] [<ffffffff823e02ad>] x86_64_start_reservations+0xb4/0xcf
[ 0.000000] [<ffffffff823e0000>] ? __init_begin+0x0/0x140
[ 0.000000] [<ffffffff823e0420>] x86_64_start_kernel+0x158/0x17b
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2002.510 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
Wasnt this supposed to have gone away with this tree?
Config and full bootlog attached.
Ingo
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 62242 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30
# Thu Jun 11 13:33:41 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not set
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=21
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_VSMP=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_KVM_CLOCK is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_CLOCK is not set
CONFIG_PARAVIRT_DEBUG=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=4096
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_NEW_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_INJECT=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_CPU_DEBUG=y
CONFIG_UP_WANTED_1=y
CONFIG_UP_WANTED_2=y
CONFIG_UP_WANTED=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
# CONFIG_DIRECT_GBPAGES is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR_ALL=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
# CONFIG_PM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_P4_CLOCKMOD=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
# CONFIG_HT_IRQ is not set
CONFIG_PCI_IOV=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=y
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_ASK_IP_FIB_HASH is not set
CONFIG_IP_FIB_TRIE=y
# CONFIG_IP_FIB_HASH is not set
CONFIG_IP_FIB_TRIE_STATS=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_TPROXY=y
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_IP_VS=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
# CONFIG_IP_VS_PROTO_UDP is not set
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
# CONFIG_NF_NAT is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
# CONFIG_BRIDGE_EBT_ARP is not set
# CONFIG_BRIDGE_EBT_IP is not set
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
# CONFIG_BRIDGE_EBT_DNAT is not set
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
# CONFIG_BRIDGE_EBT_ULOG is not set
CONFIG_BRIDGE_EBT_NFLOG=y
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
# CONFIG_ATM_BR2684 is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=y
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not set
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=y
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=y
CONFIG_DELL_LAPTOP=y
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_ACARD=y
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=y
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_SRP=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SX4=y
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=y
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_NS87415=y
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PCMCIA=y
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
# CONFIG_IEEE1394_OHCI1394 is not set
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
# CONFIG_IEEE1394_RAWIO is not set
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
# CONFIG_COMPAT_NET_DEV_OPS is not set
CONFIG_DUMMY=y
CONFIG_BONDING=y
CONFIG_MACVLAN=y
CONFIG_EQUALIZER=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
CONFIG_ETHOC=y
CONFIG_DNET=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
# CONFIG_TULIP is not set
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_ULI526X=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_HP100=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=y
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
CONFIG_SMSC9420=y
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=y
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
# CONFIG_E1000 is not set
CONFIG_E1000E=y
CONFIG_IP1000=y
CONFIG_IGB=y
# CONFIG_IGB_DCA is not set
CONFIG_IGBVF=y
# CONFIG_NS83820 is not set
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_R8169_VLAN is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_JME=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=y
CONFIG_ENIC=y
# CONFIG_IXGBE is not set
CONFIG_IXGB=y
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NIU is not set
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLGE=y
CONFIG_SFC=y
CONFIG_BE2NET=y
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
CONFIG_TMS380TR=y
# CONFIG_TMSPCI is not set
CONFIG_ABYSS=y
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
CONFIG_PCMCIA_WAVELAN=y
# CONFIG_PCMCIA_NETWAVE is not set
# CONFIG_WLAN_80211 is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=y
CONFIG_WIMAX_I2400M_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_HSO=y
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_PCMCIA_PCNET=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=y
# CONFIG_PCMCIA_IBMTR is not set
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=y
# CONFIG_HDLC_RAW is not set
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
# CONFIG_HDLC_PPP is not set
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
CONFIG_PC300TOO=y
CONFIG_FARSYNC=y
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
# CONFIG_ATM_DRIVERS is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_HIPPI=y
# CONFIG_ROADRUNNER is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
CONFIG_PPPOATM=y
CONFIG_PPPOL2TP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=y
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
# CONFIG_ISDN_AUDIO is not set
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=y
CONFIG_ISDN_DIVERSION=y
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
# CONFIG_DE_AOC is not set
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
# CONFIG_HISAX_NI1 is not set
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
# CONFIG_HISAX_16_3 is not set
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
# CONFIG_HISAX_ELSA is not set
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_GAZEL=y
# CONFIG_HISAX_HFC_SX is not set
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
# CONFIG_HISAX_SEDLBAUER_CS is not set
# CONFIG_HISAX_AVM_A1_CS is not set
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=y
CONFIG_HISAX_HFCUSB=y
# CONFIG_HISAX_HFC4S8S is not set
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_BASE=y
CONFIG_GIGASET_M105=y
# CONFIG_GIGASET_M101 is not set
# CONFIG_GIGASET_DEBUG is not set
CONFIG_GIGASET_UNDOCREQ=y
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
# CONFIG_ISDN_CAPI_CAPI20 is not set
CONFIG_ISDN_CAPI_CAPIDRV=y
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=y
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
CONFIG_ISDN_DRV_AVMB1_T1PCI=y
CONFIG_ISDN_DRV_AVMB1_C4=y
# CONFIG_CAPI_EICON is not set
CONFIG_PHONE=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
CONFIG_DIGIEPCA=y
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=y
CONFIG_SYNCLINK=y
# CONFIG_SYNCLINKMP is not set
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_RISCOM8=y
# CONFIG_SPECIALIX is not set
CONFIG_SX=y
CONFIG_RIO=y
CONFIG_RIO_OLDPCI=y
# CONFIG_STALDRV is not set
CONFIG_NOZOMI=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
CONFIG_IPWIRELESS=y
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=y
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TWL4030 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
#
# SPI GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9030=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7473=y
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
CONFIG_SENSORS_FSCPOS=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
CONFIG_SENSORS_APPLESMC=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
CONFIG_ALIM7101_WDT=y
# CONFIG_SC520_WDT is not set
CONFIG_IB700_WDT=y
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=y
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=y
CONFIG_60XX_WDT=y
# CONFIG_SBC8360_WDT is not set
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
# CONFIG_W83627HF_WDT is not set
CONFIG_W83697HF_WDT=y
CONFIG_W83697UG_WDT=y
CONFIG_W83877F_WDT=y
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_HTC_PASIC3=y
# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_TWL4030 is not set
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_REGULATOR_DA903X is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
CONFIG_USB_DABUSB=y
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_MBP_NVIDIA=y
CONFIG_BACKLIGHT_SAHARA=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_SSCAPE=y
CONFIG_SOUND_VMIDI=y
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
CONFIG_SOUND_PAS=y
CONFIG_PAS_JOYSTICK=y
CONFIG_SOUND_PSS=y
# CONFIG_PSS_MIXER is not set
CONFIG_SOUND_SB=y
CONFIG_SOUND_YM3812=y
CONFIG_SOUND_UART6850=y
CONFIG_SOUND_AEDSP16=y
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_SOUND_KAHLUA=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_MOUSE=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=y
# CONFIG_HID_SUNPLUS is not set
CONFIG_GREENASIA_FF=y
# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=y
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=y
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_FUNSOFT=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=y
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_QUALCOMM=y
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=y
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_ATM=y
# CONFIG_USB_SPEEDTOUCH is not set
CONFIG_USB_CXACRU=y
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
# CONFIG_UWB_HWA is not set
# CONFIG_UWB_WHCI is not set
# CONFIG_UWB_WLP is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_MMC_BLOCK is not set
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_WBSD=y
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SDRICOH_CS is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_ALIX2=y
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_SMX is not set
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_X86_PLATFORM_DEVICES=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4DEV_COMPAT=y
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
CONFIG_EXT4_FS_SECURITY=y
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
CONFIG_NILFS2_FS=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=y
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_POWER_TRACER=y
# CONFIG_KSYM_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_MMIOTRACE is not set
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_IOMMU_DEBUG=y
CONFIG_IOMMU_STRESS=y
# CONFIG_IOMMU_LEAK is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_TOMOYO=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=y
CONFIG_KVM_TRACE=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_64=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: boot.log --]
[-- Type: text/plain; charset=utf-8, Size: 242331 bytes --]
[ 0.000000] Linux version 2.6.30-tip-02161-g7a74539-dirty (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #59709 Thu Jun 11 13:34:22 CEST 2009
[ 0.000000] Command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty debug initcall_debug apic=verbose sysrq_always_enabled 5 ignore_loglevel
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
[ 0.000000] BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] console [earlyser0] enabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3ff30 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 00F8000000 mask FFFC000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003ff30000 (usable)
[ 0.000000] modified: 000000003ff30000 - 000000003ff40000 (ACPI data)
[ 0.000000] modified: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003ff30000
[ 0.000000] 0000000000 - 003fe00000 page 2M
[ 0.000000] 003fe00000 - 003ff30000 page 4k
[ 0.000000] kernel direct mapping tables up to 3ff30000 @ 10000-13000
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003ff30000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 000304bdc0] TEXT DATA BSS ==> [0001000000 - 000304bdc0]
[ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #3 [000304c000 - 000304c290] BRK ==> [000304c000 - 000304c290]
[ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] mpc: f0fc0-f10f8
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ff30
[ 0.000000] On node 0 totalpages: 261823
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 98 pages reserved
[ 0.000000] DMA zone: 3829 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3526 pages used for memmap
[ 0.000000] DMA32 zone: 254314 pages, LIFO batch:31
[ 0.000000] Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] mpc: f0fc0-f10f8
[ 0.000000] MPTABLE: OEM ID: ASUSTeK
[ 0.000000] MPTABLE: Product ID: K8V000000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Bus #0 is PCI
[ 0.000000] Bus #1 is PCI
[ 0.000000] Bus #2 is ISA
[ 0.000000] I/O APIC #2 Version 3 at 0xFEC00000.
[ 0.000000] Int: type 3, pol 0, trig 0, bus 02, IRQ 00, APIC ID 2, APIC INT 00
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 03, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 05, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 1, trig 1, bus 02, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 0b, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 02, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 10
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 46, APIC ID 2, APIC INT 16
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 3d, APIC ID 2, APIC INT 14
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 40, APIC ID 2, APIC INT 15
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 41, APIC ID 2, APIC INT 15
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 42, APIC ID 2, APIC INT 15
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 34, APIC ID 2, APIC INT 12
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 1c, APIC ID 2, APIC INT 10
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 11
[ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
[ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
[ 0.000000] Processors: 1
[ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bff80000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258143
[ 0.000000] Kernel command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty debug initcall_debug apic=verbose sysrq_always_enabled 5 ignore_loglevel
[ 0.000000] debug: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 997176k/1047744k available (13044k kernel code, 452k absent, 49512k reserved, 7214k data, 648k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x40/0x7e()
[ 0.000000] Hardware name: To Be Filled By O.E.M.
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #59709
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff823f8c8e>] ? alloc_arch_preferred_bootmem+0x40/0x7e
[ 0.000000] [<ffffffff81067168>] warn_slowpath_common+0x88/0xcb
[ 0.000000] [<ffffffff810671d2>] warn_slowpath_null+0x27/0x3d
[ 0.000000] [<ffffffff823f8c8e>] alloc_arch_preferred_bootmem+0x40/0x7e
[ 0.000000] [<ffffffff823f9307>] ___alloc_bootmem_nopanic+0x4e/0xec
[ 0.000000] [<ffffffff823f93c5>] ___alloc_bootmem+0x20/0x61
[ 0.000000] [<ffffffff823f962e>] __alloc_bootmem+0x1e/0x34
[ 0.000000] [<ffffffff823f757c>] early_irq_init+0x6d/0x118
[ 0.000000] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[ 0.000000] [<ffffffff823e0cf7>] start_kernel+0x192/0x394
[ 0.000000] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[ 0.000000] [<ffffffff823e02ad>] x86_64_start_reservations+0xb4/0xcf
[ 0.000000] [<ffffffff823e0000>] ? __init_begin+0x0/0x140
[ 0.000000] [<ffffffff823e0420>] x86_64_start_kernel+0x158/0x17b
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2002.510 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console handover: boot [earlyser0] -> real [tty0]
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.004000] ... MAX_LOCK_DEPTH: 48
[ 0.004000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.004000] ... CLASSHASH_SIZE: 4096
[ 0.004000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.004000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.004000] ... CHAINHASH_SIZE: 16384
[ 0.004000] memory used by lock dependency info: 5695 kB
[ 0.004000] per task-struct memory footprint: 1920 bytes
[ 0.004000] ------------------------
[ 0.004000] | Locking API testsuite:
[ 0.004000] ----------------------------------------------------------------------------
[ 0.004000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.004000] --------------------------------------------------------------------------
[ 0.004000] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.004000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.004000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.004000] --------------------------------------------------------------------------
[ 0.004000] recursive read-lock: | ok | | ok |
[ 0.004000] recursive read-lock #2: | ok | | ok |
[ 0.004000] mixed read-write-lock: | ok | | ok |
[ 0.004000] mixed write-read-lock: | ok | | ok |
[ 0.004000] --------------------------------------------------------------------------
[ 0.004000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.004000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.004000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.004000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.004000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.004000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.004000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.004000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.004000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.004000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.004000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.004000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.004000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.004000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.004000] hard-irq read-recursion/123: ok |
[ 0.004000] soft-irq read-recursion/123: ok |
[ 0.004000] hard-irq read-recursion/132: ok |
[ 0.004000] soft-irq read-recursion/132: ok |
[ 0.004000] hard-irq read-recursion/213: ok |
[ 0.004000] soft-irq read-recursion/213: ok |
[ 0.004000] hard-irq read-recursion/231: ok |
[ 0.004000] soft-irq read-recursion/231: ok |
[ 0.004000] hard-irq read-recursion/312: ok |
[ 0.004000] soft-irq read-recursion/312: ok |
[ 0.004000] hard-irq read-recursion/321: ok |
[ 0.004000] soft-irq read-recursion/321: ok |
[ 0.004000] -------------------------------------------------------
[ 0.004000] Good, all 218 testcases passed! |
[ 0.004000] ---------------------------------
[ 0.004000] ODEBUG: 0 of 0 active objects replaced
[ 0.004000] ODEBUG: selftest passed
[ 0.004034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4005.02 BogoMIPS (lpj=8010040)
[ 0.011030] Security Framework initialized
[ 0.012024] SELinux: Initializing.
[ 0.016096] SELinux: Starting in permissive mode
[ 0.020060] Mount-cache hash table entries: 256
[ 0.025884] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.028008] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.032007] tseg: 0000000000
[ 0.036071] mce: CPU supports 5 MCE banks
[ 0.040015] Performance Counters: AMD Family 0f/10/11 events, AMD PMU driver.
[ 0.048014] ... version: 0
[ 0.052006] ... bit width: 48
[ 0.056006] ... generic counters: 4
[ 0.060006] ... value mask: 0000ffffffffffff
[ 0.064006] ... max period: 00007fffffffffff
[ 0.068006] ... fixed-purpose counters: 0
[ 0.072006] ... counter mask: 000000000000000f
[ 0.076006] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08
[ 0.085408] calling spawn_ksoftirqd+0x0/0x60 @ 1
[ 0.088130] initcall spawn_ksoftirqd+0x0/0x60 returned 0 after 0 usecs
[ 0.092009] calling relay_init+0x0/0x2d @ 1
[ 0.096008] initcall relay_init+0x0/0x2d returned 0 after 0 usecs
[ 0.100008] calling tracer_alloc_buffers+0x0/0x14d @ 1
[ 0.104143] Testing tracer nop: PASSED
[ 0.108841] initcall tracer_alloc_buffers+0x0/0x14d returned 0 after 3906 usecs
[ 0.112008] calling init_trace_printk+0x0/0x2d @ 1
[ 0.116008] initcall init_trace_printk+0x0/0x2d returned 0 after 0 usecs
[ 0.120008] calling trace_workqueue_early_init+0x0/0x111 @ 1
[ 0.124070] initcall trace_workqueue_early_init+0x0/0x111 returned 0 after 0 usecs
[ 0.128007] Setting APIC routing to flat
[ 0.132010] enabled ExtINT on CPU#0
[ 0.136511] ENABLING IO-APIC IRQs
[ 0.139940] init IO_APIC IRQs
[ 0.140000] 2-0 (apicid-pin) not connected
[ 0.140000] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
[ 0.140012] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[ 0.144011] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
[ 0.148011] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[ 0.152011] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[ 0.156011] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[ 0.160011] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
[ 0.164011] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[ 0.168011] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
[ 0.172011] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[ 0.176011] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[ 0.180011] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[ 0.184011] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[ 0.188017] alloc irq_desc for 16 on node 0
[ 0.192000] alloc kstat_irqs on node 0
[ 0.192007] IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1)
[ 0.196009] alloc irq_desc for 17 on node 0
[ 0.200000] alloc kstat_irqs on node 0
[ 0.200007] IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1)
[ 0.204009] alloc irq_desc for 18 on node 0
[ 0.208000] alloc kstat_irqs on node 0
[ 0.208007] IOAPIC[0]: Set routing entry (2-18 -> 0x59 -> IRQ 18 Mode:1 Active:1)
[ 0.212006] 2-19 (apicid-pin) not connected
[ 0.216006] alloc irq_desc for 20 on node 0
[ 0.220000] alloc kstat_irqs on node 0
[ 0.220007] IOAPIC[0]: Set routing entry (2-20 -> 0x61 -> IRQ 20 Mode:1 Active:1)
[ 0.224009] alloc irq_desc for 21 on node 0
[ 0.228000] alloc kstat_irqs on node 0
[ 0.228007] IOAPIC[0]: Set routing entry (2-21 -> 0x69 -> IRQ 21 Mode:1 Active:1)
[ 0.232009] alloc irq_desc for 22 on node 0
[ 0.236000] alloc kstat_irqs on node 0
[ 0.236007] IOAPIC[0]: Set routing entry (2-22 -> 0x71 -> IRQ 22 Mode:1 Active:1)
[ 0.240006] 2-23 (apicid-pin) not connected
[ 0.246793] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.289000] Using local APIC timer interrupts.
[ 0.289002] calibrating APIC timer ...
[ 0.296000] ... lapic delta = 1251674
[ 0.296000] ..... delta 1251674
[ 0.296000] ..... mult: 53755629
[ 0.296000] ..... calibration result: 801071
[ 0.296000] ..... CPU clock speed is 2002.2718 MHz.
[ 0.296000] ..... host bus clock speed is 200.1071 MHz.
[ 0.296000] ... verify APIC timer
[ 0.404468] ... jiffies delta = 25
[ 0.407971] ... jiffies result ok
[ 0.418652] calling init_cpufreq_transition_notifier_list+0x0/0x42 @ 1
[ 0.420017] initcall init_cpufreq_transition_notifier_list+0x0/0x42 returned 0 after 0 usecs
[ 0.424005] calling net_ns_init+0x0/0x136 @ 1
[ 0.428003] net_namespace: 1528 bytes
[ 0.432034] initcall net_ns_init+0x0/0x136 returned 0 after 3906 usecs
[ 0.436006] calling cpufreq_tsc+0x0/0x28 @ 1
[ 0.440005] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
[ 0.444004] calling print_banner+0x0/0xe @ 1
[ 0.448012] Booting paravirtualized kernel on bare hardware
[ 0.452004] initcall print_banner+0x0/0xe returned 0 after 3906 usecs
[ 0.456005] calling ksysfs_init+0x0/0xe4 @ 1
[ 0.460030] initcall ksysfs_init+0x0/0xe4 returned 0 after 0 usecs
[ 0.464005] calling async_init+0x0/0x69 @ 1
[ 0.468005] initcall async_init+0x0/0x69 returned 0 after 0 usecs
[ 0.472005] calling init_jiffies_clocksource+0x0/0x39 @ 1
[ 0.476018] initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs
[ 0.480005] calling init_hw_breakpoint+0x0/0x39 @ 1
[ 0.484006] initcall init_hw_breakpoint+0x0/0x39 returned 0 after 0 usecs
[ 0.488005] calling filelock_init+0x0/0x55 @ 1
[ 0.492011] initcall filelock_init+0x0/0x55 returned 0 after 0 usecs
[ 0.496004] calling init_script_binfmt+0x0/0x3b @ 1
[ 0.500018] initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs
[ 0.504004] calling init_elf_binfmt+0x0/0x3b @ 1
[ 0.508005] initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
[ 0.512004] calling init_compat_elf_binfmt+0x0/0x3b @ 1
[ 0.516005] initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
[ 0.520005] calling debugfs_init+0x0/0x80 @ 1
[ 0.524015] initcall debugfs_init+0x0/0x80 returned 0 after 0 usecs
[ 0.528005] calling securityfs_init+0x0/0x77 @ 1
[ 0.532014] initcall securityfs_init+0x0/0x77 returned 0 after 0 usecs
[ 0.536005] calling random32_init+0x0/0xbe @ 1
[ 0.540005] initcall random32_init+0x0/0xbe returned 0 after 0 usecs
[ 0.544004] calling regulator_init+0x0/0x53 @ 1
[ 0.548003] regulator: core version 0.5
[ 0.552248] initcall regulator_init+0x0/0x53 returned 0 after 3906 usecs
[ 0.556429] calling cpufreq_core_init+0x0/0x53 @ 1
[ 0.560006] initcall cpufreq_core_init+0x0/0x53 returned 0 after 0 usecs
[ 0.564005] calling cpuidle_init+0x0/0x47 @ 1
[ 0.568019] initcall cpuidle_init+0x0/0x47 returned 0 after 0 usecs
[ 0.572006] calling virtio_init+0x0/0x52 @ 1
[ 0.576240] initcall virtio_init+0x0/0x52 returned 0 after 0 usecs
[ 0.580040] calling sock_init+0x0/0x85 @ 1
[ 0.584236] initcall sock_init+0x0/0x85 returned 0 after 0 usecs
[ 0.588005] calling netpoll_init+0x0/0x69 @ 1
[ 0.592005] initcall netpoll_init+0x0/0x69 returned 0 after 0 usecs
[ 0.596004] calling netlink_proto_init+0x0/0x169 @ 1
[ 0.600079] NET: Registered protocol family 16
[ 0.604135] initcall netlink_proto_init+0x0/0x169 returned 0 after 3906 usecs
[ 0.608005] calling bdi_class_init+0x0/0x68 @ 1
[ 0.612504] initcall bdi_class_init+0x0/0x68 returned 0 after 0 usecs
[ 0.616127] calling kobject_uevent_init+0x0/0x7b @ 1
[ 0.620027] initcall kobject_uevent_init+0x0/0x7b returned 0 after 0 usecs
[ 0.624004] calling gpiolib_sysfs_init+0x0/0xbc @ 1
[ 0.628269] initcall gpiolib_sysfs_init+0x0/0xbc returned 0 after 0 usecs
[ 0.632045] calling pcibus_class_init+0x0/0x40 @ 1
[ 0.636223] initcall pcibus_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.640068] calling pci_driver_init+0x0/0x39 @ 1
[ 0.644259] initcall pci_driver_init+0x0/0x39 returned 0 after 0 usecs
[ 0.648049] calling lcd_class_init+0x0/0x74 @ 1
[ 0.652223] initcall lcd_class_init+0x0/0x74 returned 0 after 0 usecs
[ 0.656048] calling backlight_class_init+0x0/0x84 @ 1
[ 0.660236] initcall backlight_class_init+0x0/0x84 returned 0 after 0 usecs
[ 0.664048] calling video_output_class_init+0x0/0x40 @ 1
[ 0.668227] initcall video_output_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.672047] calling tty_class_init+0x0/0x58 @ 1
[ 0.676241] initcall tty_class_init+0x0/0x58 returned 0 after 0 usecs
[ 0.680047] calling vtconsole_class_init+0x0/0xe8 @ 1
[ 0.684538] initcall vtconsole_class_init+0x0/0xe8 returned 0 after 0 usecs
[ 0.688046] calling i2c_init+0x0/0x8c @ 1
[ 0.692733] initcall i2c_init+0x0/0x8c returned 0 after 0 usecs
[ 0.696073] calling amd_postcore_init+0x0/0x63 @ 1
[ 0.700007] node 0 link 0: io port [1000, ffffff]
[ 0.704005] TOM: 0000000040000000 aka 1024M
[ 0.708005] node 0 link 0: mmio [a0000, bffff]
[ 0.716004] node 0 link 0: mmio [40000000, fe0bffff]
[ 0.720303] bus: [00,ff] on node 0 link 0
[ 0.724004] bus: 00 index 0 io port: [0, ffff]
[ 0.728004] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.732004] bus: 00 index 2 mmio: [40000000, fcffffffff]
[ 0.736005] initcall amd_postcore_init+0x0/0x63 returned 0 after 35156 usecs
[ 0.740005] calling arch_kdebugfs_init+0x0/0x55 @ 1
[ 0.744080] initcall arch_kdebugfs_init+0x0/0x55 returned 0 after 0 usecs
[ 0.748005] calling mtrr_if_init+0x0/0x8a @ 1
[ 0.756006] initcall mtrr_if_init+0x0/0x8a returned 0 after 3906 usecs
[ 0.760004] calling dmi_id_init+0x0/0x11c @ 1
[ 0.764610] initcall dmi_id_init+0x0/0x11c returned 0 after 0 usecs
[ 0.768152] calling dma_bus_init+0x0/0x66 @ 1
[ 0.772229] initcall dma_bus_init+0x0/0x66 returned 0 after 0 usecs
[ 0.776081] calling dma_channel_table_init+0x0/0x134 @ 1
[ 0.780014] initcall dma_channel_table_init+0x0/0x134 returned 0 after 0 usecs
[ 0.784004] calling dca_init+0x0/0x45 @ 1
[ 0.788003] dca service started, version 1.8
[ 0.792228] initcall dca_init+0x0/0x45 returned 0 after 3906 usecs
[ 0.796072] calling pci_arch_init+0x0/0x67 @ 1
[ 0.800010] PCI: Using configuration type 1 for base access
[ 0.804011] initcall pci_arch_init+0x0/0x67 returned 0 after 3906 usecs
[ 0.808004] calling topology_init+0x0/0x3d @ 1
[ 0.812226] initcall topology_init+0x0/0x3d returned 0 after 0 usecs
[ 0.816054] calling mtrr_init_finialize+0x0/0x64 @ 1
[ 0.820005] initcall mtrr_init_finialize+0x0/0x64 returned 0 after 0 usecs
[ 0.824005] calling param_sysfs_init+0x0/0xf5 @ 1
[ 0.946976] initcall param_sysfs_init+0x0/0xf5 returned 0 after 113281 usecs
[ 0.948124] calling default_bdi_init+0x0/0x5e @ 1
[ 0.952374] initcall default_bdi_init+0x0/0x5e returned 0 after 0 usecs
[ 0.956333] calling init_bio+0x0/0xef @ 1
[ 0.960084] bio: create slab <bio-0> at 0
[ 0.964101] initcall init_bio+0x0/0xef returned 0 after 3906 usecs
[ 0.968005] calling bio_integrity_init+0x0/0xd5 @ 1
[ 0.972135] initcall bio_integrity_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.976101] calling cryptomgr_init+0x0/0x57 @ 1
[ 0.980012] initcall cryptomgr_init+0x0/0x57 returned 0 after 0 usecs
[ 0.984005] calling blk_settings_init+0x0/0x51 @ 1
[ 0.988004] initcall blk_settings_init+0x0/0x51 returned 0 after 0 usecs
[ 0.992004] calling blk_ioc_init+0x0/0x51 @ 1
[ 0.996010] initcall blk_ioc_init+0x0/0x51 returned 0 after 0 usecs
[ 1.000004] calling blk_softirq_init+0x0/0x56 @ 1
[ 1.004004] initcall blk_softirq_init+0x0/0x56 returned 0 after 0 usecs
[ 1.008004] calling genhd_device_init+0x0/0x8c @ 1
[ 1.012125] initcall genhd_device_init+0x0/0x8c returned 0 after 0 usecs
[ 1.016083] calling blk_dev_integrity_init+0x0/0x51 @ 1
[ 1.020021] initcall blk_dev_integrity_init+0x0/0x51 returned 0 after 0 usecs
[ 1.024005] calling gpiolib_debugfs_init+0x0/0x4b @ 1
[ 1.028022] initcall gpiolib_debugfs_init+0x0/0x4b returned 0 after 0 usecs
[ 1.032004] calling pca953x_init+0x0/0x3b @ 1
[ 1.036254] initcall pca953x_init+0x0/0x3b returned 0 after 0 usecs
[ 1.040013] calling pcf857x_init+0x0/0x3b @ 1
[ 1.044236] initcall pcf857x_init+0x0/0x3b returned 0 after 0 usecs
[ 1.048049] calling pci_slot_init+0x0/0x73 @ 1
[ 1.052024] initcall pci_slot_init+0x0/0x73 returned 0 after 0 usecs
[ 1.056005] calling misc_init+0x0/0xc5 @ 1
[ 1.060277] initcall misc_init+0x0/0xc5 returned 0 after 0 usecs
[ 1.064037] calling cn_init+0x0/0x11a @ 1
[ 1.068084] initcall cn_init+0x0/0x11a returned 0 after 0 usecs
[ 1.072006] calling tifm_init+0x0/0xab @ 1
[ 1.076548] initcall tifm_init+0x0/0xab returned 0 after 0 usecs
[ 1.080040] calling twl4030_init+0x0/0x3b @ 1
[ 1.084240] initcall twl4030_init+0x0/0x3b returned 0 after 0 usecs
[ 1.088065] calling init_scsi+0x0/0x97 @ 1
[ 1.096679] SCSI subsystem initialized
[ 1.100021] initcall init_scsi+0x0/0x97 returned 0 after 7812 usecs
[ 1.104005] calling ata_init+0x0/0xb4 @ 1
[ 1.108156] libata version 3.00 loaded.
[ 1.112100] initcall ata_init+0x0/0xb4 returned 0 after 3906 usecs
[ 1.116005] calling phy_init+0x0/0x57 @ 1
[ 1.120723] initcall phy_init+0x0/0x57 returned 0 after 0 usecs
[ 1.124011] calling init_pcmcia_cs+0x0/0x56 @ 1
[ 1.128228] initcall init_pcmcia_cs+0x0/0x56 returned 0 after 0 usecs
[ 1.132114] calling nop_usb_xceiv_init+0x0/0x39 @ 1
[ 1.136238] initcall nop_usb_xceiv_init+0x0/0x39 returned 0 after 0 usecs
[ 1.140036] calling usb_init+0x0/0x125 @ 1
[ 1.144718] usbcore: registered new interface driver usbfs
[ 1.148298] usbcore: registered new interface driver hub
[ 1.152399] usbcore: registered new device driver usb
[ 1.156049] initcall usb_init+0x0/0x125 returned 0 after 11718 usecs
[ 1.160005] calling serio_init+0x0/0xb2 @ 1
[ 1.164304] initcall serio_init+0x0/0xb2 returned 0 after 0 usecs
[ 1.168058] calling gameport_init+0x0/0xb2 @ 1
[ 1.172393] initcall gameport_init+0x0/0xb2 returned 0 after 0 usecs
[ 1.176044] calling input_init+0x0/0x15d @ 1
[ 1.184209] initcall input_init+0x0/0x15d returned 0 after 3906 usecs
[ 1.188016] calling power_supply_class_init+0x0/0x5f @ 1
[ 1.192227] initcall power_supply_class_init+0x0/0x5f returned 0 after 0 usecs
[ 1.196043] calling hwmon_init+0x0/0x69 @ 1
[ 1.200244] initcall hwmon_init+0x0/0x69 returned 0 after 0 usecs
[ 1.204036] calling thermal_init+0x0/0x7e @ 1
[ 1.208226] initcall thermal_init+0x0/0x7e returned 0 after 0 usecs
[ 1.212044] calling mmc_init+0x0/0x9c @ 1
[ 1.216845] initcall mmc_init+0x0/0x9c returned 0 after 0 usecs
[ 1.220040] calling leds_init+0x0/0x67 @ 1
[ 1.224230] initcall leds_init+0x0/0x67 returned 0 after 0 usecs
[ 1.228096] calling pci_subsys_init+0x0/0x125 @ 1
[ 1.232003] PCI: Probing PCI hardware
[ 1.236039] PCI: Probing PCI hardware (bus 00)
[ 1.240330] PCI: Scanning bus 0000:00
[ 1.244107] pci 0000:00:00.0: found [1106:3188] class 000600 header type 00
[ 1.248015] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 1.252046] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.256106] pci 0000:00:01.0: found [1106:b188] class 000604 header type 01
[ 1.260037] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.264021] pci 0000:00:01.0: supports D1
[ 1.268093] pci 0000:00:07.0: found [1106:3044] class 000c00 header type 00
[ 1.272027] pci 0000:00:07.0: reg 10 32bit mmio: [0xfde00000-0xfde007ff]
[ 1.276010] pci 0000:00:07.0: reg 14 io port: [0xec00-0xec7f]
[ 1.280041] pci 0000:00:07.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.284024] pci 0000:00:07.0: supports D2
[ 1.288004] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
[ 1.292007] pci 0000:00:07.0: PME# disabled
[ 1.296046] pci 0000:00:0a.0: found [10b7:1700] class 000200 header type 00
[ 1.300034] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfd900000-0xfd903fff]
[ 1.304010] pci 0000:00:0a.0: reg 14 io port: [0xb000-0xb0ff]
[ 1.308040] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.312030] pci 0000:00:0a.0: supports D1 D2
[ 1.316004] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.320007] pci 0000:00:0a.0: PME# disabled
[ 1.324050] pci 0000:00:0d.0: found [109e:036e] class 000400 header type 00
[ 1.328033] pci 0000:00:0d.0: reg 10 32bit mmio: [0xf7e00000-0xf7e00fff]
[ 1.332045] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.336069] pci 0000:00:0d.1: found [109e:0878] class 000480 header type 00
[ 1.340033] pci 0000:00:0d.1: reg 10 32bit mmio: [0xf7f00000-0xf7f00fff]
[ 1.344045] pci 0000:00:0d.1: calling quirk_resource_alignment+0x0/0x1dd
[ 1.348088] pci 0000:00:0f.0: found [1106:3149] class 000104 header type 00
[ 1.352028] pci 0000:00:0f.0: reg 10 io port: [0xe800-0xe807]
[ 1.356010] pci 0000:00:0f.0: reg 14 io port: [0xe400-0xe403]
[ 1.360010] pci 0000:00:0f.0: reg 18 io port: [0xe000-0xe007]
[ 1.364010] pci 0000:00:0f.0: reg 1c io port: [0xd800-0xd803]
[ 1.368010] pci 0000:00:0f.0: reg 20 io port: [0xd400-0xd40f]
[ 1.372010] pci 0000:00:0f.0: reg 24 io port: [0xd000-0xd0ff]
[ 1.376015] pci 0000:00:0f.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.380057] pci 0000:00:0f.1: found [1106:0571] class 000101 header type 00
[ 1.384053] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 1.388023] pci 0000:00:0f.1: calling quirk_resource_alignment+0x0/0x1dd
[ 1.392075] pci 0000:00:10.0: found [1106:3038] class 000c03 header type 00
[ 1.396051] pci 0000:00:10.0: reg 20 io port: [0xb400-0xb41f]
[ 1.400021] pci 0000:00:10.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.404024] pci 0000:00:10.0: supports D1 D2
[ 1.408004] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.412007] pci 0000:00:10.0: PME# disabled
[ 1.416036] pci 0000:00:10.1: found [1106:3038] class 000c03 header type 00
[ 1.420051] pci 0000:00:10.1: reg 20 io port: [0xb800-0xb81f]
[ 1.424021] pci 0000:00:10.1: calling quirk_resource_alignment+0x0/0x1dd
[ 1.428024] pci 0000:00:10.1: supports D1 D2
[ 1.432004] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.436007] pci 0000:00:10.1: PME# disabled
[ 1.440036] pci 0000:00:10.2: found [1106:3038] class 000c03 header type 00
[ 1.444051] pci 0000:00:10.2: reg 20 io port: [0xc000-0xc01f]
[ 1.448021] pci 0000:00:10.2: calling quirk_resource_alignment+0x0/0x1dd
[ 1.452024] pci 0000:00:10.2: supports D1 D2
[ 1.456004] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.460006] pci 0000:00:10.2: PME# disabled
[ 1.464036] pci 0000:00:10.3: found [1106:3038] class 000c03 header type 00
[ 1.468051] pci 0000:00:10.3: reg 20 io port: [0xc400-0xc41f]
[ 1.472021] pci 0000:00:10.3: calling quirk_resource_alignment+0x0/0x1dd
[ 1.476003] Clocksource tsc unstable (delta = 222690115 ns)
[ 1.480043] pci 0000:00:10.3: supports D1 D2
[ 1.484004] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.488007] pci 0000:00:10.3: PME# disabled
[ 1.492036] pci 0000:00:10.4: found [1106:3104] class 000c03 header type 00
[ 1.496026] pci 0000:00:10.4: reg 10 32bit mmio: [0xfdf00000-0xfdf000ff]
[ 1.500045] pci 0000:00:10.4: calling quirk_resource_alignment+0x0/0x1dd
[ 1.504023] pci 0000:00:10.4: supports D1 D2
[ 1.508004] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.512006] pci 0000:00:10.4: PME# disabled
[ 1.516046] pci 0000:00:11.0: found [1106:3227] class 000601 header type 00
[ 1.520070] pci 0000:00:11.0: calling vt8237_force_enable_hpet+0x0/0x180
[ 1.524003] HPET not enabled in BIOS. You might try hpet=force boot option
[ 1.528007] pci 0000:00:11.0: calling asus_hides_ac97_lpc+0x0/0xfc
[ 1.532009] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 1.536005] pci 0000:00:11.0: calling quirk_via_bridge+0x0/0xa9
[ 1.540005] pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.544007] pci 0000:00:11.0: calling pci_fixup_msi_k8t_onboard_sound+0x0/0xdf
[ 1.548071] pci 0000:00:11.5: found [1106:3059] class 000401 header type 00
[ 1.552027] pci 0000:00:11.5: reg 10 io port: [0xc800-0xc8ff]
[ 1.556046] pci 0000:00:11.5: calling quirk_resource_alignment+0x0/0x1dd
[ 1.560024] pci 0000:00:11.5: supports D1 D2
[ 1.564037] pci 0000:00:11.6: found [1106:3068] class 000780 header type 00
[ 1.568027] pci 0000:00:11.6: reg 10 io port: [0x00-0xff]
[ 1.572046] pci 0000:00:11.6: calling quirk_resource_alignment+0x0/0x1dd
[ 1.576074] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
[ 1.580038] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.584084] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
[ 1.588035] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1dd
[ 1.592026] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
[ 1.596034] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1dd
[ 1.600028] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
[ 1.604038] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1dd
[ 1.608041] PCI: Fixups for bus 0000:00
[ 1.612007] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0
[ 1.616019] PCI: Scanning bus 0000:01
[ 1.620028] pci 0000:01:00.0: found [1002:5964] class 000300 header type 00
[ 1.624020] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x47
[ 1.628012] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
[ 1.632009] pci 0000:01:00.0: reg 14 io port: [0xa000-0xa0ff]
[ 1.636009] pci 0000:01:00.0: reg 18 32bit mmio: [0xfd800000-0xfd80ffff]
[ 1.640024] pci 0000:01:00.0: reg 30 32bit mmio: [0xfd700000-0xfd71ffff]
[ 1.644008] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1dd
[ 1.648026] pci 0000:01:00.0: supports D1 D2
[ 1.652035] pci 0000:01:00.1: found [1002:5d44] class 000380 header type 00
[ 1.656015] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x47
[ 1.660011] pci 0000:01:00.1: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
[ 1.664009] pci 0000:01:00.1: reg 14 32bit mmio: [0xfd600000-0xfd60ffff]
[ 1.668033] pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x1dd
[ 1.672019] pci 0000:01:00.1: supports D1 D2
[ 1.676107] PCI: Fixups for bus 0000:01
[ 1.680007] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
[ 1.684007] pci 0000:00:01.0: bridge 32bit mmio: [0xfd300000-0xfd8fffff]
[ 1.688007] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7b00000-0xf7afffff]
[ 1.692004] PCI: Bus scan for 0000:01 returning with max=01
[ 1.696008] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1
[ 1.700008] PCI: Bus scan for 0000:00 returning with max=01
[ 1.711981] pci 0000:00:11.0: VIA IRQ router [1106:3227]
[ 1.712728] initcall pci_subsys_init+0x0/0x125 returned 0 after 468750 usecs
[ 1.716006] calling proto_init+0x0/0x39 @ 1
[ 1.720019] initcall proto_init+0x0/0x39 returned 0 after 0 usecs
[ 1.724004] calling net_dev_init+0x0/0x185 @ 1
[ 1.728953] initcall net_dev_init+0x0/0x185 returned 0 after 0 usecs
[ 1.736561] calling neigh_init+0x0/0x98 @ 1
[ 1.740006] initcall neigh_init+0x0/0x98 returned 0 after 0 usecs
[ 1.744004] calling fib_rules_init+0x0/0xcc @ 1
[ 1.748008] initcall fib_rules_init+0x0/0xcc returned 0 after 0 usecs
[ 1.752004] calling genl_init+0x0/0x100 @ 1
[ 1.756126] initcall genl_init+0x0/0x100 returned 0 after 0 usecs
[ 1.760005] calling cipso_v4_init+0x0/0xae @ 1
[ 1.764027] initcall cipso_v4_init+0x0/0xae returned 0 after 0 usecs
[ 1.768004] calling bt_init+0x0/0x81 @ 1
[ 1.772003] Bluetooth: Core ver 2.15
[ 1.776324] NET: Registered protocol family 31
[ 1.780146] Bluetooth: HCI device and connection manager initialized
[ 1.784027] Bluetooth: HCI socket layer initialized
[ 1.788005] initcall bt_init+0x0/0x81 returned 0 after 15625 usecs
[ 1.792004] calling atm_init+0x0/0xdc @ 1
[ 1.796004] NET: Registered protocol family 8
[ 1.800003] NET: Registered protocol family 20
[ 1.804278] initcall atm_init+0x0/0xdc returned 0 after 7812 usecs
[ 1.808148] calling wireless_nlevent_init+0x0/0x69 @ 1
[ 1.812005] initcall wireless_nlevent_init+0x0/0x69 returned 0 after 0 usecs
[ 1.816005] calling cfg80211_init+0x0/0x9f @ 1
[ 1.820772] cfg80211: Using static regulatory domain info
[ 1.824064] cfg80211: Regulatory domain: US
[ 1.828003] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1.832004] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 1.836004] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.840004] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.844004] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.848004] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.852004] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 1.856102] cfg80211: Calling CRDA for country: US
[ 1.860454] initcall cfg80211_init+0x0/0x9f returned 0 after 39062 usecs
[ 1.864018] calling ieee80211_init+0x0/0x32 @ 1
[ 1.868027] initcall ieee80211_init+0x0/0x32 returned 0 after 0 usecs
[ 1.872005] calling netlbl_init+0x0/0xa8 @ 1
[ 1.876003] NetLabel: Initializing
[ 1.880003] NetLabel: domain hash size = 128
[ 1.884003] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.888217] NetLabel: unlabeled traffic allowed by default
[ 1.892005] initcall netlbl_init+0x0/0xa8 returned 0 after 15625 usecs
[ 1.896004] calling rfkill_init+0x0/0x8a @ 1
[ 1.900228] initcall rfkill_init+0x0/0x8a returned 0 after 0 usecs
[ 1.904052] calling pci_iommu_init+0x0/0x54 @ 1
[ 1.978718] DMA-API: preallocated 32768 debug entries
[ 1.980003] DMA-API: debugging enabled by kernel config
[ 1.984344] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188]
[ 1.995335] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 1.996365] initcall pci_iommu_init+0x0/0x54 returned 0 after 85937 usecs
[ 2.000047] calling print_all_ICs+0x0/0x60 @ 1
[ 2.004003]
[ 2.004004] printing PIC contents
[ 2.008006] ... PIC IMR: fffb
[ 2.011172] ... PIC IRR: 0001
[ 2.012003] ... PIC ISR: 0000
[ 2.016006] ... PIC ELCR: 0c20
[ 2.019169]
[ 2.019170] printing local APIC contents on CPU#0/0:
[ 2.020000] ... APIC ID: 00000000 (0)
[ 2.020000] ... APIC VERSION: 00040010
[ 2.020000] ... APIC TASKPRI: 00000000 (00)
[ 2.020000] ... APIC ARBPRI: 000000e0 (e0)
[ 2.020000] ... APIC PROCPRI: 00000000
[ 2.020000] ... APIC LDR: 01000000
[ 2.020000] ... APIC DFR: ffffffff
[ 2.020000] ... APIC SPIV: 000001ff
[ 2.020000] ... APIC ISR field:
[ 2.020000] 0123456789abcdef0123456789abcdef
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] ... APIC TMR field:
[ 2.020000] 0123456789abcdef0123456789abcdef
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] ... APIC IRR field:
[ 2.020000] 0123456789abcdef0123456789abcdef
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000000000000000000000
[ 2.020000] 00000000000000010000000000000000
[ 2.020000] ... APIC ESR: 00000000
[ 2.020000] ... APIC ICR: 00000000
[ 2.020000] ... APIC ICR2: 00000000
[ 2.020000] ... APIC LVTT: 000200ef
[ 2.020000] ... APIC LVTPC: 00000400
[ 2.020000] ... APIC LVT0: 00010700
[ 2.020000] ... APIC LVT1: 00000400
[ 2.020000] ... APIC LVTERR: 000000fe
[ 2.020000] ... APIC TMICT: 0000c392
[ 2.020000] ... APIC TMCCT: 0000a588
[ 2.020000] ... APIC TDCR: 00000003
[ 2.020000]
[ 2.020003] number of MP IRQ sources: 25.
[ 2.024003] number of IO-APIC #2 registers: 24.
[ 2.028002] testing the IO APIC.......................
[ 2.032014]
[ 2.036003] IO APIC #2......
[ 2.040003] .... register #00: 02000000
[ 2.044003] ....... : physical APIC id: 02
[ 2.048003] ....... : Delivery Type: 0
[ 2.052003] ....... : LTS : 0
[ 2.056003] .... register #01: 00178003
[ 2.060003] ....... : max redirection entries: 0017
[ 2.064003] ....... : PRQ implemented: 1
[ 2.068003] ....... : IO APIC version: 0003
[ 2.072002] .... IRQ redirection table:
[ 2.076003] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[ 2.080014] 00 000 1 0 0 0 0 0 0 00
[ 2.084014] 01 001 0 0 0 0 0 1 1 31
[ 2.091352] 02 001 0 0 0 0 0 1 1 30
[ 2.096014] 03 001 0 0 0 0 0 1 1 33
[ 2.100013] 04 001 0 0 0 0 0 1 1 34
[ 2.107352] 05 001 0 0 0 0 0 1 1 35
[ 2.112013] 06 001 0 0 0 0 0 1 1 36
[ 2.116013] 07 001 0 0 0 0 0 1 1 37
[ 2.124014] 08 001 0 0 0 0 0 1 1 38
[ 2.128013] 09 001 0 0 0 0 0 1 1 39
[ 2.132013] 0a 001 0 0 0 0 0 1 1 3A
[ 2.140013] 0b 001 0 0 0 0 0 1 1 3B
[ 2.144013] 0c 001 0 0 0 0 0 1 1 3C
[ 2.148013] 0d 001 0 0 0 0 0 1 1 3D
[ 2.156014] 0e 001 0 0 0 0 0 1 1 3E
[ 2.160014] 0f 001 0 0 0 0 0 1 1 3F
[ 2.167351] 10 001 1 1 0 1 0 1 1 49
[ 2.172013] 11 001 1 1 0 1 0 1 1 51
[ 2.176014] 12 001 1 1 0 1 0 1 1 59
[ 2.183352] 13 000 1 0 0 0 0 0 0 00
[ 2.188013] 14 001 1 1 0 1 0 1 1 61
[ 2.192014] 15 001 1 1 0 1 0 1 1 69
[ 2.199351] 16 001 1 1 0 1 0 1 1 71
[ 2.204013] 17 000 1 0 0 0 0 0 0 00
[ 2.208003] IRQ to pin mappings:
[ 2.212003] IRQ0 -> 0:2
[ 2.216301] IRQ1 -> 0:1
[ 2.218970] IRQ3 -> 0:3
[ 2.220890] IRQ4 -> 0:4
[ 2.224303] IRQ5 -> 0:5
[ 2.226978] IRQ6 -> 0:6
[ 2.228873] IRQ7 -> 0:7
[ 2.232883] IRQ8 -> 0:8
[ 2.235549] IRQ9 -> 0:9
[ 2.236883] IRQ10 -> 0:10
[ 2.240969] IRQ11 -> 0:11
[ 2.243809] IRQ12 -> 0:12
[ 2.244969] IRQ13 -> 0:13
[ 2.248961] IRQ14 -> 0:14
[ 2.252301] IRQ15 -> 0:15
[ 2.255142] IRQ16 -> 0:16
[ 2.256961] IRQ17 -> 0:17
[ 2.260969] IRQ18 -> 0:18
[ 2.263818] IRQ20 -> 0:20
[ 2.264961] IRQ21 -> 0:21
[ 2.268961] IRQ22 -> 0:22
[ 2.272304] .................................... done.
[ 2.276004] initcall print_all_ICs+0x0/0x60 returned 0 after 265625 usecs
[ 2.280004] calling hpet_late_init+0x0/0x108 @ 1
[ 2.284005] initcall hpet_late_init+0x0/0x108 returned -19 after 0 usecs
[ 2.288005] calling clocksource_done_booting+0x0/0x37 @ 1
[ 2.292005] initcall clocksource_done_booting+0x0/0x37 returned 0 after 0 usecs
[ 2.296005] calling ftrace_init_debugfs+0x0/0x56 @ 1
[ 2.300045] initcall ftrace_init_debugfs+0x0/0x56 returned 0 after 0 usecs
[ 2.304005] calling rb_init_debugfs+0x0/0x56 @ 1
[ 2.308020] initcall rb_init_debugfs+0x0/0x56 returned 0 after 0 usecs
[ 2.312005] calling tracer_init_debugfs+0x0/0x225 @ 1
[ 2.316675] initcall tracer_init_debugfs+0x0/0x225 returned 0 after 0 usecs
[ 2.320005] calling init_trace_printk_function_export+0x0/0x56 @ 1
[ 2.324020] initcall init_trace_printk_function_export+0x0/0x56 returned 0 after 0 usecs
[ 2.328005] calling stat_workqueue_init+0x0/0x54 @ 1
[ 2.332054] initcall stat_workqueue_init+0x0/0x54 returned 0 after 0 usecs
[ 2.336005] calling event_trace_init+0x0/0x1c6 @ 1
[ 2.352871] initcall event_trace_init+0x0/0x1c6 returned 0 after 11718 usecs
[ 2.356006] calling init_pipe_fs+0x0/0x72 @ 1
[ 2.360190] initcall init_pipe_fs+0x0/0x72 returned 0 after 0 usecs
[ 2.364005] calling init_mnt_writers+0x0/0x70 @ 1
[ 2.368005] initcall init_mnt_writers+0x0/0x70 returned 0 after 0 usecs
[ 2.372004] calling eventpoll_init+0x0/0x102 @ 1
[ 2.376040] initcall eventpoll_init+0x0/0x102 returned 0 after 0 usecs
[ 2.380004] calling anon_inode_init+0x0/0x143 @ 1
[ 2.384176] initcall anon_inode_init+0x0/0x143 returned 0 after 0 usecs
[ 2.388006] calling tomoyo_initerface_init+0x0/0x17f @ 1
[ 2.392005] initcall tomoyo_initerface_init+0x0/0x17f returned 0 after 0 usecs
[ 2.396005] calling chr_dev_init+0x0/0xca @ 1
[ 2.404365] initcall chr_dev_init+0x0/0xca returned 0 after 3906 usecs
[ 2.408284] calling firmware_class_init+0x0/0x9f @ 1
[ 2.412231] initcall firmware_class_init+0x0/0x9f returned 0 after 0 usecs
[ 2.416071] calling ieee1394_init+0x0/0x288 @ 1
[ 2.421557] initcall ieee1394_init+0x0/0x288 returned 0 after 0 usecs
[ 2.424091] calling init_pcmcia_bus+0x0/0xaa @ 1
[ 2.428317] initcall init_pcmcia_bus+0x0/0xaa returned 0 after 0 usecs
[ 2.432188] calling cpufreq_gov_performance_init+0x0/0x39 @ 1
[ 2.436023] initcall cpufreq_gov_performance_init+0x0/0x39 returned 0 after 0 usecs
[ 2.440005] calling cpufreq_gov_powersave_init+0x0/0x39 @ 1
[ 2.444007] initcall cpufreq_gov_powersave_init+0x0/0x39 returned 0 after 0 usecs
[ 2.448004] calling ssb_modinit+0x0/0x99 @ 1
[ 2.452294] initcall ssb_modinit+0x0/0x99 returned 0 after 0 usecs
[ 2.456055] calling pcibios_assign_resources+0x0/0xb1 @ 1
[ 2.460160] pci 0000:00:11.6: BAR 0: got res [0x1000-0x10ff] bus [0x1000-0x10ff] flags 0x20101
[ 2.464009] pci 0000:00:11.6: BAR 0: moved to bus [0x1000-0x10ff] flags 0x20101
[ 2.468008] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 2.472005] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 2.476008] pci 0000:00:01.0: MEM window: 0xfd300000-0xfd8fffff
[ 2.480006] pci 0000:00:01.0: PREFETCH window: 0x000000d7b00000-0x000000f7afffff
[ 2.484022] pci 0000:00:01.0: calling quirk_via_vlink+0x0/0xf8
[ 2.488008] pci 0000:00:01.0: setting latency timer to 64
[ 2.492006] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 2.496004] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 2.500004] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 2.504004] pci_bus 0000:01: resource 1 mem: [0xfd300000-0xfd8fffff]
[ 2.508004] pci_bus 0000:01: resource 2 pref mem [0xd7b00000-0xf7afffff]
[ 2.512006] initcall pcibios_assign_resources+0x0/0xb1 returned 0 after 50781 usecs
[ 2.516006] calling inet_init+0x0/0x1fa @ 1
[ 2.520034] NET: Registered protocol family 2
[ 2.524116] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.528391] IPv4 FIB: Using LC-trie version 0.408
[ 2.532403] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 2.540474] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 2.553851] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.556049] TCP reno registered
[ 2.560255] initcall inet_init+0x0/0x1fa returned 0 after 39062 usecs
[ 2.564006] calling af_unix_init+0x0/0x7b @ 1
[ 2.568010] NET: Registered protocol family 1
[ 2.572016] initcall af_unix_init+0x0/0x7b returned 0 after 3906 usecs
[ 2.576005] calling populate_rootfs+0x0/0x12d @ 1
[ 2.584336] initcall populate_rootfs+0x0/0x12d returned 0 after 3906 usecs
[ 2.588006] calling calgary_fixup_tce_spaces+0x0/0x121 @ 1
[ 2.592005] initcall calgary_fixup_tce_spaces+0x0/0x121 returned -19 after 0 usecs
[ 2.596004] calling svm_init+0x0/0x40 @ 1
[ 2.600582] has_svm: svm not available
[ 2.604003] kvm: no hardware support
[ 2.608005] initcall svm_init+0x0/0x40 returned -95 after 7812 usecs
[ 2.612004] initcall svm_init+0x0/0x40 returned with error code -95
[ 2.616004] calling i8259A_init_sysfs+0x0/0x49 @ 1
[ 2.620539] initcall i8259A_init_sysfs+0x0/0x49 returned 0 after 0 usecs
[ 2.624094] calling vsyscall_init+0x0/0xbd @ 1
[ 2.628005] initcall vsyscall_init+0x0/0xbd returned 0 after 0 usecs
[ 2.632004] calling sbf_init+0x0/0x118 @ 1
[ 2.636004] initcall sbf_init+0x0/0x118 returned 0 after 0 usecs
[ 2.640005] calling i8237A_init_sysfs+0x0/0x49 @ 1
[ 2.644444] initcall i8237A_init_sysfs+0x0/0x49 returned 0 after 0 usecs
[ 2.648077] calling add_rtc_cmos+0x0/0x68 @ 1
[ 2.652268] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.656079] initcall add_rtc_cmos+0x0/0x68 returned 0 after 3906 usecs
[ 2.660005] calling cache_sysfs_init+0x0/0x4b @ 1
[ 2.665018] initcall cache_sysfs_init+0x0/0x4b returned 0 after 0 usecs
[ 2.668049] calling cpu_debug_init+0x0/0xcc @ 1
[ 2.678210] cpu0(1) debug files 136
[ 2.680006] initcall cpu_debug_init+0x0/0xcc returned 0 after 7812 usecs
[ 2.684005] calling mce_init_device+0x0/0x9c @ 1
[ 2.688775] initcall mce_init_device+0x0/0x9c returned 0 after 0 usecs
[ 2.692133] calling thermal_throttle_init_device+0x0/0x65 @ 1
[ 2.696005] initcall thermal_throttle_init_device+0x0/0x65 returned 0 after 0 usecs
[ 2.700005] calling inject_init+0x0/0x4b @ 1
[ 2.704003] Machine check injector initialized
[ 2.708004] initcall inject_init+0x0/0x4b returned 0 after 3906 usecs
[ 2.712005] calling msr_init+0x0/0xef @ 1
[ 2.716535] initcall msr_init+0x0/0xef returned 0 after 0 usecs
[ 2.720100] calling cpuid_init+0x0/0xef @ 1
[ 2.724514] initcall cpuid_init+0x0/0xef returned 0 after 0 usecs
[ 2.728093] calling ioapic_init_sysfs+0x0/0xd2 @ 1
[ 2.732450] initcall ioapic_init_sysfs+0x0/0xd2 returned 0 after 0 usecs
[ 2.736084] calling add_pcspkr+0x0/0x4f @ 1
[ 2.740260] initcall add_pcspkr+0x0/0x4f returned 0 after 0 usecs
[ 2.744083] calling microcode_init+0x0/0x126 @ 1
[ 2.748344] microcode: CPU0: AMD CPU family 0xf not supported
[ 2.752310] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.756054] initcall microcode_init+0x0/0x126 returned 0 after 7812 usecs
[ 2.760006] calling start_periodic_check_for_corruption+0x0/0x61 @ 1
[ 2.764003] Scanning for low memory corruption every 60 seconds
[ 2.768008] initcall start_periodic_check_for_corruption+0x0/0x61 returned 0 after 3906 usecs
[ 2.772005] calling audit_classes_init+0x0/0xd6 @ 1
[ 2.776032] initcall audit_classes_init+0x0/0xd6 returned 0 after 0 usecs
[ 2.780004] calling start_pageattr_test+0x0/0x6c @ 1
[ 2.784109] initcall start_pageattr_test+0x0/0x6c returned 0 after 0 usecs
[ 2.788048] calling pt_dump_init+0x0/0x57 @ 1
[ 2.792022] initcall pt_dump_init+0x0/0x57 returned 0 after 0 usecs
[ 2.796005] calling init+0x0/0x39 @ 1
[ 2.800295] initcall init+0x0/0x39 returned 0 after 0 usecs
[ 2.804017] calling crc32c_intel_mod_init+0x0/0x47 @ 1
[ 2.808005] initcall crc32c_intel_mod_init+0x0/0x47 returned -19 after 0 usecs
[ 2.812004] calling init_vdso_vars+0x0/0x27b @ 1
[ 2.816021] initcall init_vdso_vars+0x0/0x27b returned 0 after 0 usecs
[ 2.820004] calling sysenter_setup+0x0/0xfb @ 1
[ 2.824011] initcall sysenter_setup+0x0/0xfb returned 0 after 0 usecs
[ 2.828004] calling init_aout_binfmt+0x0/0x3b @ 1
[ 2.832005] initcall init_aout_binfmt+0x0/0x3b returned 0 after 0 usecs
[ 2.836004] calling proc_schedstat_init+0x0/0x49 @ 1
[ 2.840019] initcall proc_schedstat_init+0x0/0x49 returned 0 after 0 usecs
[ 2.844004] calling proc_execdomains_init+0x0/0x49 @ 1
[ 2.848014] initcall proc_execdomains_init+0x0/0x49 returned 0 after 0 usecs
[ 2.852005] calling ioresources_init+0x0/0x63 @ 1
[ 2.856022] initcall ioresources_init+0x0/0x63 returned 0 after 0 usecs
[ 2.860004] calling uid_cache_init+0x0/0xb4 @ 1
[ 2.864019] initcall uid_cache_init+0x0/0xb4 returned 0 after 0 usecs
[ 2.868005] calling init_posix_timers+0x0/0x103 @ 1
[ 2.872011] initcall init_posix_timers+0x0/0x103 returned 0 after 0 usecs
[ 2.876004] calling init_posix_cpu_timers+0x0/0xd6 @ 1
[ 2.880005] initcall init_posix_cpu_timers+0x0/0xd6 returned 0 after 0 usecs
[ 2.884004] calling nsproxy_cache_init+0x0/0x54 @ 1
[ 2.888010] initcall nsproxy_cache_init+0x0/0x54 returned 0 after 0 usecs
[ 2.892005] calling create_proc_profile+0x0/0x75 @ 1
[ 2.896004] initcall create_proc_profile+0x0/0x75 returned 0 after 0 usecs
[ 2.900004] calling timekeeping_init_device+0x0/0x49 @ 1
[ 2.904456] initcall timekeeping_init_device+0x0/0x49 returned 0 after 0 usecs
[ 2.908030] calling init_clocksource_sysfs+0x0/0x77 @ 1
[ 2.912452] initcall init_clocksource_sysfs+0x0/0x77 returned 0 after 0 usecs
[ 2.916063] calling init_timer_list_procfs+0x0/0x53 @ 1
[ 2.920016] initcall init_timer_list_procfs+0x0/0x53 returned 0 after 0 usecs
[ 2.924004] calling lockdep_proc_init+0x0/0x86 @ 1
[ 2.928031] initcall lockdep_proc_init+0x0/0x86 returned 0 after 0 usecs
[ 2.932004] calling futex_init+0x0/0xe6 @ 1
[ 2.936039] initcall futex_init+0x0/0xe6 returned 0 after 0 usecs
[ 2.940004] calling proc_dma_init+0x0/0x49 @ 1
[ 2.944014] initcall proc_dma_init+0x0/0x49 returned 0 after 0 usecs
[ 2.948004] calling kallsyms_init+0x0/0x4c @ 1
[ 2.952014] initcall kallsyms_init+0x0/0x4c returned 0 after 0 usecs
[ 2.956005] calling backtrace_regression_test+0x0/0x11f @ 1
[ 2.960003] ====[ backtrace testing ]===========
[ 2.964003] Testing a backtrace from process context.
[ 2.968002] The following trace is a kernel self test and not a bug!
[ 2.972005] Pid: 1, comm: swapper Tainted: G W 2.6.30-tip-02161-g7a74539-dirty #59709
[ 2.976003] Call Trace:
[ 2.980006] [<ffffffff8109a53d>] ? backtrace_regression_test+0x0/0x11f
[ 2.984005] [<ffffffff8109a587>] backtrace_regression_test+0x4a/0x11f
[ 2.988005] [<ffffffff8109a53d>] ? backtrace_regression_test+0x0/0x11f
[ 2.992006] [<ffffffff8106bb0c>] ? set_normalized_timespec+0xd/0x5f
[ 2.996006] [<ffffffff81083c74>] ? ktime_get_ts+0x61/0x7d
[ 3.000005] [<ffffffff8109a53d>] ? backtrace_regression_test+0x0/0x11f
[ 3.004005] [<ffffffff81083cb5>] ? ktime_get+0x25/0x6a
[ 3.008006] [<ffffffff810090ba>] do_one_initcall+0x66/0x15b
[ 3.012006] [<ffffffff810a793d>] ? irq_to_desc+0xd/0x50
[ 3.016005] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[ 3.020005] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[ 3.024005] [<ffffffff823e086c>] kernel_init+0x8f/0xf7
[ 3.028005] [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[ 3.032006] [<ffffffff8102dcca>] child_rip+0xa/0x20
[ 3.036005] [<ffffffff8102d7ce>] ? restore_args+0x0/0x30
[ 3.040005] [<ffffffff823e07dd>] ? kernel_init+0x0/0xf7
[ 3.044005] [<ffffffff8102dcc0>] ? child_rip+0x0/0x20
[ 3.048003] Testing a backtrace from irq context.
[ 3.052003] The following trace is a kernel self test and not a bug!
[ 3.056011] Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.30-tip-02161-g7a74539-dirty #59709
[ 3.060001] Call Trace:
[ 3.064001] <IRQ> [<ffffffff8109a51b>] backtrace_test_irq_callback+0x21/0x43
[ 3.068004] [<ffffffff8102ddca>] ? call_softirq+0x1a/0x24
[ 3.072004] [<ffffffff8106d264>] tasklet_action+0x79/0xd5
[ 3.076004] [<ffffffff8106dc02>] __do_softirq+0xb8/0x19f
[ 3.080003] [<ffffffff8106d037>] ? ksoftirqd+0x0/0xdf
[ 3.084003] [<ffffffff8102ddca>] call_softirq+0x1a/0x24
[ 3.088001] <EOI> [<ffffffff8102fb53>] do_softirq+0x5b/0xd1
[ 3.092003] [<ffffffff8106d037>] ? ksoftirqd+0x0/0xdf
[ 3.096003] [<ffffffff8106d090>] ksoftirqd+0x59/0xdf
[ 3.100003] [<ffffffff8106d037>] ? ksoftirqd+0x0/0xdf
[ 3.104003] [<ffffffff8107fb25>] kthread+0x68/0xa9
[ 3.108003] [<ffffffff8102dcca>] child_rip+0xa/0x20
[ 3.112003] [<ffffffff8102d7ce>] ? restore_args+0x0/0x30
[ 3.116003] [<ffffffff8107fabd>] ? kthread+0x0/0xa9
[ 3.120003] [<ffffffff8102dcc0>] ? child_rip+0x0/0x20
[ 3.124079] Testing a saved backtrace.
[ 3.128018] The following trace is a kernel self test and not a bug!
[ 3.132005] [<ffffffff81039a77>] save_stack_trace+0x3c/0x71
[ 3.140003] [<ffffffff8109a624>] backtrace_regression_test+0xe7/0x11f
[ 3.144002] [<ffffffff810090ba>] do_one_initcall+0x66/0x15b
[ 3.152002] [<ffffffff823e086c>] kernel_init+0x8f/0xf7
[ 3.156002] [<ffffffff8102dcca>] child_rip+0xa/0x20
[ 3.160002] [<ffffffffffffffff>] 0xffffffffffffffff
[ 3.168003] ====[ end of backtrace testing ]====
[ 3.172005] initcall backtrace_regression_test+0x0/0x11f returned 0 after 207031 usecs
[ 3.176004] calling audit_init+0x0/0x1a1 @ 1
[ 3.180003] audit: initializing netlink socket (disabled)
[ 3.184074] type=2000 audit(1244719830.184:1): initialized
[ 3.188018] initcall audit_init+0x0/0x1a1 returned 0 after 7812 usecs
[ 3.192005] calling audit_tree_init+0x0/0x70 @ 1
[ 3.196009] initcall audit_tree_init+0x0/0x70 returned 0 after 0 usecs
[ 3.200004] calling hung_task_init+0x0/0x79 @ 1
[ 3.204063] initcall hung_task_init+0x0/0x79 returned 0 after 0 usecs
[ 3.208023] calling ftrace_nodyn_init+0x0/0x37 @ 1
[ 3.212005] initcall ftrace_nodyn_init+0x0/0x37 returned 0 after 0 usecs
[ 3.216005] calling ring_buffer_benchmark_init+0x0/0xf5 @ 1
[ 3.220597] initcall ring_buffer_benchmark_init+0x0/0xf5 returned 0 after 0 usecs
[ 3.224010] calling init_events+0x0/0x8c @ 1
[ 3.228016] initcall init_events+0x0/0x8c returned 0 after 0 usecs
[ 3.232005] calling init_sched_switch_trace+0x0/0x39 @ 1
[ 3.236007] Testing tracer sched_switch: <6>Starting ring buffer hammer
[ 13.000005] End ring buffer hammer
[ 13.003646] PASSED
[ 13.004014] initcall init_sched_switch_trace+0x0/0x39 returned 0 after 9539062 usecs
[ 13.008006] calling init_function_trace+0x0/0x39 @ 1
[ 13.012005] Testing tracer function: <6>Time: 9760000 (usecs)
[ 13.020008] Overruns: 36091935
[ 13.024008] Read: 0 (by events)
[ 13.027687] Entries: 62939
[ 13.028003] Total: 36154874
[ 13.032003] Missed: 0
[ 13.036003] Hit: 36154874
[ 13.039167] Entries per millisec: 3704
[ 13.040003] 269 ns per entry
[ 13.044003] Sleeping for 10 secs
[ 13.152151] PASSED
[ 13.154278] initcall init_function_trace+0x0/0x39 returned 0 after 136718 usecs
[ 13.156005] calling stack_trace_init+0x0/0x91 @ 1
[ 13.160053] initcall stack_trace_init+0x0/0x91 returned 0 after 0 usecs
[ 13.164005] calling init_graph_trace+0x0/0x39 @ 1
[ 13.168005] Testing tracer function_graph: PASSED
[ 13.277007] initcall init_graph_trace+0x0/0x39 returned 0 after 105468 usecs
[ 13.280007] calling init_power_trace+0x0/0x39 @ 1
[ 13.284006] initcall init_power_trace+0x0/0x39 returned 0 after 0 usecs
[ 13.288005] calling init_kmem_tracer+0x0/0x39 @ 1
[ 13.292006] initcall init_kmem_tracer+0x0/0x39 returned 0 after 0 usecs
[ 13.296005] calling perf_counter_sysfs_init+0x0/0x40 @ 1
[ 13.300028] initcall perf_counter_sysfs_init+0x0/0x40 returned 0 after 0 usecs
[ 13.304005] calling init_per_zone_pages_min+0x0/0xb1 @ 1
[ 13.308100] initcall init_per_zone_pages_min+0x0/0xb1 returned 0 after 0 usecs
[ 13.312004] calling pdflush_init+0x0/0x43 @ 1
[ 13.316150] initcall pdflush_init+0x0/0x43 returned 0 after 0 usecs
[ 13.320008] calling kswapd_init+0x0/0x3b @ 1
[ 13.324065] initcall kswapd_init+0x0/0x3b returned 0 after 0 usecs
[ 13.328013] calling init_tmpfs+0x0/0x104 @ 1
[ 13.336043] initcall init_tmpfs+0x0/0x104 returned 0 after 3906 usecs
[ 13.340004] calling setup_vmstat+0x0/0xa3 @ 1
[ 13.344055] initcall setup_vmstat+0x0/0xa3 returned 0 after 0 usecs
[ 13.348004] calling mm_sysfs_init+0x0/0x50 @ 1
[ 13.352018] initcall mm_sysfs_init+0x0/0x50 returned 0 after 0 usecs
[ 13.356004] calling proc_vmalloc_init+0x0/0x4c @ 1
[ 13.360015] initcall proc_vmalloc_init+0x0/0x4c returned 0 after 0 usecs
[ 13.364005] calling hugetlb_init+0x0/0x1fd @ 1
[ 13.368006] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 13.372047] initcall hugetlb_init+0x0/0x1fd returned 0 after 3906 usecs
[ 13.376005] calling slab_proc_init+0x0/0x4c @ 1
[ 13.380015] initcall slab_proc_init+0x0/0x4c returned 0 after 0 usecs
[ 13.384004] calling slab_sysfs_init+0x0/0x119 @ 1
[ 13.422075] initcall slab_sysfs_init+0x0/0x119 returned 0 after 31250 usecs
[ 13.424487] calling fasync_init+0x0/0x51 @ 1
[ 13.428374] initcall fasync_init+0x0/0x51 returned 0 after 0 usecs
[ 13.432284] calling proc_filesystems_init+0x0/0x49 @ 1
[ 13.436021] initcall proc_filesystems_init+0x0/0x49 returned 0 after 0 usecs
[ 13.440004] calling dnotify_init+0x0/0x51 @ 1
[ 13.444337] initcall dnotify_init+0x0/0x51 returned 0 after 0 usecs
[ 13.448149] calling inotify_setup+0x0/0x37 @ 1
[ 13.452005] initcall inotify_setup+0x0/0x37 returned 0 after 0 usecs
[ 13.456004] calling proc_locks_init+0x0/0x49 @ 1
[ 13.460016] initcall proc_locks_init+0x0/0x49 returned 0 after 0 usecs
[ 13.464004] calling init_sys32_ioctl+0x0/0xac @ 1
[ 13.468022] initcall init_sys32_ioctl+0x0/0xac returned 0 after 0 usecs
[ 13.472004] calling init_mbcache+0x0/0x3b @ 1
[ 13.476007] initcall init_mbcache+0x0/0x3b returned 0 after 0 usecs
[ 13.480004] calling dquot_init+0x0/0x12a @ 1
[ 13.484003] VFS: Disk quotas dquot_6.5.2
[ 13.488338] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 13.492158] initcall dquot_init+0x0/0x12a returned 0 after 7812 usecs
[ 13.496005] calling init_v1_quota_format+0x0/0x39 @ 1
[ 13.500006] initcall init_v1_quota_format+0x0/0x39 returned 0 after 0 usecs
[ 13.504004] calling init_v2_quota_format+0x0/0x39 @ 1
[ 13.508005] initcall init_v2_quota_format+0x0/0x39 returned 0 after 0 usecs
[ 13.512004] calling proc_cmdline_init+0x0/0x49 @ 1
[ 13.516016] initcall proc_cmdline_init+0x0/0x49 returned 0 after 0 usecs
[ 13.520004] calling proc_cpuinfo_init+0x0/0x49 @ 1
[ 13.524015] initcall proc_cpuinfo_init+0x0/0x49 returned 0 after 0 usecs
[ 13.528004] calling proc_devices_init+0x0/0x49 @ 1
[ 13.532015] initcall proc_devices_init+0x0/0x49 returned 0 after 0 usecs
[ 13.536004] calling proc_interrupts_init+0x0/0x49 @ 1
[ 13.540015] initcall proc_interrupts_init+0x0/0x49 returned 0 after 0 usecs
[ 13.544004] calling proc_loadavg_init+0x0/0x49 @ 1
[ 13.548015] initcall proc_loadavg_init+0x0/0x49 returned 0 after 0 usecs
[ 13.552004] calling proc_meminfo_init+0x0/0x49 @ 1
[ 13.556015] initcall proc_meminfo_init+0x0/0x49 returned 0 after 0 usecs
[ 13.560004] calling proc_stat_init+0x0/0x49 @ 1
[ 13.564015] initcall proc_stat_init+0x0/0x49 returned 0 after 0 usecs
[ 13.568004] calling proc_uptime_init+0x0/0x49 @ 1
[ 13.572021] initcall proc_uptime_init+0x0/0x49 returned 0 after 0 usecs
[ 13.576004] calling proc_version_init+0x0/0x49 @ 1
[ 13.580015] initcall proc_version_init+0x0/0x49 returned 0 after 0 usecs
[ 13.584004] calling proc_kcore_init+0x0/0x70 @ 1
[ 13.588015] initcall proc_kcore_init+0x0/0x70 returned 0 after 0 usecs
[ 13.592004] calling proc_kmsg_init+0x0/0x4c @ 1
[ 13.596014] initcall proc_kmsg_init+0x0/0x4c returned 0 after 0 usecs
[ 13.600004] calling proc_page_init+0x0/0x69 @ 1
[ 13.604024] initcall proc_page_init+0x0/0x69 returned 0 after 0 usecs
[ 13.608004] calling configfs_init+0x0/0xfb @ 1
[ 13.612351] initcall configfs_init+0x0/0xfb returned 0 after 0 usecs
[ 13.616063] calling init_devpts_fs+0x0/0x65 @ 1
[ 13.620252] initcall init_devpts_fs+0x0/0x65 returned 0 after 0 usecs
[ 13.624005] calling init_dlm+0x0/0xae @ 1
[ 13.629546] DLM (built Jun 11 2009 13:34:03) installed
[ 13.632056] initcall init_dlm+0x0/0xae returned 0 after 3906 usecs
[ 13.636005] calling init_ext3_fs+0x0/0x99 @ 1
[ 13.640727] initcall init_ext3_fs+0x0/0x99 returned 0 after 0 usecs
[ 13.644128] calling init_ext2_fs+0x0/0x99 @ 1
[ 13.648690] initcall init_ext2_fs+0x0/0x99 returned 0 after 0 usecs
[ 13.652134] calling init_ext4_fs+0x0/0x106 @ 1
[ 13.657734] initcall init_ext4_fs+0x0/0x106 returned 0 after 0 usecs
[ 13.660088] calling journal_init+0x0/0xb9 @ 1
[ 13.665344] initcall journal_init+0x0/0xb9 returned 0 after 0 usecs
[ 13.668154] calling journal_init+0x0/0x112 @ 1
[ 13.676753] initcall journal_init+0x0/0x112 returned 0 after 3906 usecs
[ 13.680102] calling init_cramfs_fs+0x0/0x57 @ 1
[ 13.684024] initcall init_cramfs_fs+0x0/0x57 returned 0 after 0 usecs
[ 13.688005] calling init_ramfs_fs+0x0/0x39 @ 1
[ 13.692006] initcall init_ramfs_fs+0x0/0x39 returned 0 after 0 usecs
[ 13.696004] calling init_hugetlbfs_fs+0x0/0xbe @ 1
[ 13.700535] initcall init_hugetlbfs_fs+0x0/0xbe returned 0 after 0 usecs
[ 13.704095] calling init_coda+0x0/0x160 @ 1
[ 13.712755] initcall init_coda+0x0/0x160 returned 0 after 3906 usecs
[ 13.716128] calling init_minix_fs+0x0/0x89 @ 1
[ 13.724341] initcall init_minix_fs+0x0/0x89 returned 0 after 0 usecs
[ 13.728150] calling init_fat_fs+0x0/0x75 @ 1
[ 13.736228] initcall init_fat_fs+0x0/0x75 returned 0 after 3906 usecs
[ 13.740057] calling init_msdos_fs+0x0/0x39 @ 1
[ 13.744007] initcall init_msdos_fs+0x0/0x39 returned 0 after 0 usecs
[ 13.748004] calling init_bfs_fs+0x0/0x89 @ 1
[ 13.752335] initcall init_bfs_fs+0x0/0x89 returned 0 after 0 usecs
[ 13.756049] calling init_iso9660_fs+0x0/0x89 @ 1
[ 13.760339] initcall init_iso9660_fs+0x0/0x89 returned 0 after 0 usecs
[ 13.764046] calling init_hfsplus_fs+0x0/0x83 @ 1
[ 13.768348] initcall init_hfsplus_fs+0x0/0x83 returned 0 after 0 usecs
[ 13.772044] calling init_hfs_fs+0x0/0x83 @ 1
[ 13.776338] initcall init_hfs_fs+0x0/0x83 returned 0 after 0 usecs
[ 13.780045] calling ecryptfs_init+0x0/0x220 @ 1
[ 13.791713] initcall ecryptfs_init+0x0/0x220 returned 0 after 3906 usecs
[ 13.792108] calling vxfs_init+0x0/0x7f @ 1
[ 13.796342] initcall vxfs_init+0x0/0x7f returned 0 after 0 usecs
[ 13.800463] calling init_nfs_fs+0x0/0x149 @ 1
[ 13.808588] initcall init_nfs_fs+0x0/0x149 returned 0 after 3906 usecs
[ 13.812202] calling init_nfsd+0x0/0x109 @ 1
[ 13.816003] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.825247] initcall init_nfsd+0x0/0x109 returned 0 after 7812 usecs
[ 13.828005] calling init_nlm+0x0/0x2d @ 1
[ 13.832005] initcall init_nlm+0x0/0x2d returned 0 after 0 usecs
[ 13.836004] calling init_nls_cp437+0x0/0x39 @ 1
[ 13.840021] initcall init_nls_cp437+0x0/0x39 returned 0 after 0 usecs
[ 13.844004] calling init_nls_cp737+0x0/0x39 @ 1
[ 13.848005] initcall init_nls_cp737+0x0/0x39 returned 0 after 0 usecs
[ 13.852004] calling init_nls_cp775+0x0/0x39 @ 1
[ 13.856005] initcall init_nls_cp775+0x0/0x39 returned 0 after 0 usecs
[ 13.860004] calling init_nls_cp850+0x0/0x39 @ 1
[ 13.864005] initcall init_nls_cp850+0x0/0x39 returned 0 after 0 usecs
[ 13.868004] calling init_nls_cp860+0x0/0x39 @ 1
[ 13.872005] initcall init_nls_cp860+0x0/0x39 returned 0 after 0 usecs
[ 13.876004] calling init_nls_cp862+0x0/0x39 @ 1
[ 13.880005] initcall init_nls_cp862+0x0/0x39 returned 0 after 0 usecs
[ 13.884004] calling init_nls_cp863+0x0/0x39 @ 1
[ 13.888005] initcall init_nls_cp863+0x0/0x39 returned 0 after 0 usecs
[ 13.892004] calling init_nls_cp864+0x0/0x39 @ 1
[ 13.896005] initcall init_nls_cp864+0x0/0x39 returned 0 after 0 usecs
[ 13.900004] calling init_nls_cp865+0x0/0x39 @ 1
[ 13.904005] initcall init_nls_cp865+0x0/0x39 returned 0 after 0 usecs
[ 13.908004] calling init_nls_cp866+0x0/0x39 @ 1
[ 13.912005] initcall init_nls_cp866+0x0/0x39 returned 0 after 0 usecs
[ 13.916004] calling init_nls_cp932+0x0/0x39 @ 1
[ 13.920005] initcall init_nls_cp932+0x0/0x39 returned 0 after 0 usecs
[ 13.924004] calling init_nls_euc_jp+0x0/0x6f @ 1
[ 13.928006] initcall init_nls_euc_jp+0x0/0x6f returned 0 after 0 usecs
[ 13.932004] calling init_nls_cp936+0x0/0x39 @ 1
[ 13.936005] initcall init_nls_cp936+0x0/0x39 returned 0 after 0 usecs
[ 13.940004] calling init_nls_cp949+0x0/0x39 @ 1
[ 13.944005] initcall init_nls_cp949+0x0/0x39 returned 0 after 0 usecs
[ 13.948004] calling init_nls_cp950+0x0/0x39 @ 1
[ 13.952005] initcall init_nls_cp950+0x0/0x39 returned 0 after 0 usecs
[ 13.956004] calling init_nls_cp1250+0x0/0x39 @ 1
[ 13.960005] initcall init_nls_cp1250+0x0/0x39 returned 0 after 0 usecs
[ 13.964004] calling init_nls_cp1251+0x0/0x39 @ 1
[ 13.968005] initcall init_nls_cp1251+0x0/0x39 returned 0 after 0 usecs
[ 13.972004] calling init_nls_ascii+0x0/0x39 @ 1
[ 13.976005] initcall init_nls_ascii+0x0/0x39 returned 0 after 0 usecs
[ 13.980004] calling init_nls_iso8859_1+0x0/0x39 @ 1
[ 13.984005] initcall init_nls_iso8859_1+0x0/0x39 returned 0 after 0 usecs
[ 13.988004] calling init_nls_iso8859_3+0x0/0x39 @ 1
[ 13.992005] initcall init_nls_iso8859_3+0x0/0x39 returned 0 after 0 usecs
[ 13.996004] calling init_nls_iso8859_5+0x0/0x39 @ 1
[ 14.000005] initcall init_nls_iso8859_5+0x0/0x39 returned 0 after 0 usecs
[ 14.004004] calling init_nls_iso8859_6+0x0/0x39 @ 1
[ 14.008005] initcall init_nls_iso8859_6+0x0/0x39 returned 0 after 0 usecs
[ 14.012004] calling init_nls_iso8859_7+0x0/0x39 @ 1
[ 14.016005] initcall init_nls_iso8859_7+0x0/0x39 returned 0 after 0 usecs
[ 14.020005] calling init_nls_cp1255+0x0/0x39 @ 1
[ 14.024026] initcall init_nls_cp1255+0x0/0x39 returned 0 after 0 usecs
[ 14.028005] calling init_nls_iso8859_9+0x0/0x39 @ 1
[ 14.032005] initcall init_nls_iso8859_9+0x0/0x39 returned 0 after 0 usecs
[ 14.036004] calling init_nls_iso8859_13+0x0/0x39 @ 1
[ 14.040005] initcall init_nls_iso8859_13+0x0/0x39 returned 0 after 0 usecs
[ 14.044005] calling init_nls_iso8859_15+0x0/0x39 @ 1
[ 14.048005] initcall init_nls_iso8859_15+0x0/0x39 returned 0 after 0 usecs
[ 14.052005] calling init_nls_koi8_r+0x0/0x39 @ 1
[ 14.056005] initcall init_nls_koi8_r+0x0/0x39 returned 0 after 0 usecs
[ 14.060004] calling init_nls_koi8_u+0x0/0x39 @ 1
[ 14.064005] initcall init_nls_koi8_u+0x0/0x39 returned 0 after 0 usecs
[ 14.068004] calling init_nls_koi8_ru+0x0/0x6f @ 1
[ 14.072006] initcall init_nls_koi8_ru+0x0/0x6f returned 0 after 0 usecs
[ 14.076004] calling init_nls_utf8+0x0/0x4a @ 1
[ 14.080006] initcall init_nls_utf8+0x0/0x4a returned 0 after 0 usecs
[ 14.084004] calling init_sysv_fs+0x0/0x75 @ 1
[ 14.088414] initcall init_sysv_fs+0x0/0x75 returned 0 after 0 usecs
[ 14.092215] calling init_smb_fs+0x0/0x99 @ 1
[ 14.096685] initcall init_smb_fs+0x0/0x99 returned 0 after 0 usecs
[ 14.100046] calling init_cifs+0x0/0x37a @ 1
[ 14.109050] initcall init_cifs+0x0/0x37a returned 0 after 3906 usecs
[ 14.112125] calling init_ncp_fs+0x0/0x89 @ 1
[ 14.116361] initcall init_ncp_fs+0x0/0x89 returned 0 after 0 usecs
[ 14.120107] calling init_hpfs_fs+0x0/0x89 @ 1
[ 14.124345] initcall init_hpfs_fs+0x0/0x89 returned 0 after 0 usecs
[ 14.128071] calling init_ntfs_fs+0x0/0x23c @ 1
[ 14.132004] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[ 14.141558] initcall init_ntfs_fs+0x0/0x23c returned 0 after 7812 usecs
[ 14.144047] calling init_ufs_fs+0x0/0x89 @ 1
[ 14.148352] initcall init_ufs_fs+0x0/0x89 returned 0 after 0 usecs
[ 14.152209] calling init_affs_fs+0x0/0x89 @ 1
[ 14.156343] initcall init_affs_fs+0x0/0x89 returned 0 after 0 usecs
[ 14.160050] calling init_romfs_fs+0x0/0xab @ 1
[ 14.164003] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 14.168357] initcall init_romfs_fs+0x0/0xab returned 0 after 3906 usecs
[ 14.172072] calling init_qnx4_fs+0x0/0x99 @ 1
[ 14.180091] QNX4 filesystem 0.2.3 registered.
[ 14.184031] initcall init_qnx4_fs+0x0/0x99 returned 0 after 7812 usecs
[ 14.188009] calling init_adfs_fs+0x0/0x89 @ 1
[ 14.196179] initcall init_adfs_fs+0x0/0x89 returned 0 after 3906 usecs
[ 14.200011] calling fuse_init+0x0/0x15c @ 1
[ 14.204004] fuse init (API version 7.11)
[ 14.212289] initcall fuse_init+0x0/0x15c returned 0 after 7812 usecs
[ 14.216064] calling init_nilfs_fs+0x0/0xb9 @ 1
[ 14.224851] initcall init_nilfs_fs+0x0/0xb9 returned 0 after 3906 usecs
[ 14.228047] calling init_befs_fs+0x0/0xa4 @ 1
[ 14.232003] BeFS version: 0.9.3
[ 14.235591] initcall init_befs_fs+0x0/0xa4 returned 0 after 0 usecs
[ 14.236094] calling init_btrfs_fs+0x0/0xb5 @ 1
[ 14.245609] Btrfs loaded
[ 14.248106] initcall init_btrfs_fs+0x0/0xb5 returned 0 after 7812 usecs
[ 14.252005] calling ipc_init+0x0/0x56 @ 1
[ 14.256023] msgmni has been set to 1948
[ 14.260030] initcall ipc_init+0x0/0x56 returned 0 after 3906 usecs
[ 14.264005] calling key_proc_init+0x0/0x5a @ 1
[ 14.268016] initcall key_proc_init+0x0/0x5a returned 0 after 0 usecs
[ 14.272005] calling selinux_nf_ip_init+0x0/0x67 @ 1
[ 14.276003] SELinux: Registering netfilter hooks
[ 14.280030] initcall selinux_nf_ip_init+0x0/0x67 returned 0 after 3906 usecs
[ 14.284005] calling init_sel_fs+0x0/0x8e @ 1
[ 14.288940] initcall init_sel_fs+0x0/0x8e returned 0 after 0 usecs
[ 14.292005] calling selnl_init+0x0/0x74 @ 1
[ 14.296036] initcall selnl_init+0x0/0x74 returned 0 after 0 usecs
[ 14.300005] calling sel_netif_init+0x0/0x8d @ 1
[ 14.304013] initcall sel_netif_init+0x0/0x8d returned 0 after 0 usecs
[ 14.308005] calling sel_netnode_init+0x0/0x9a @ 1
[ 14.312019] initcall sel_netnode_init+0x0/0x9a returned 0 after 0 usecs
[ 14.316005] calling sel_netport_init+0x0/0x9a @ 1
[ 14.320010] initcall sel_netport_init+0x0/0x9a returned 0 after 0 usecs
[ 14.324005] calling aurule_init+0x0/0x5e @ 1
[ 14.328006] initcall aurule_init+0x0/0x5e returned 0 after 0 usecs
[ 14.332005] calling crypto_wq_init+0x0/0x59 @ 1
[ 14.336075] initcall crypto_wq_init+0x0/0x59 returned 0 after 0 usecs
[ 14.340202] calling crypto_algapi_init+0x0/0x34 @ 1
[ 14.344017] initcall crypto_algapi_init+0x0/0x34 returned 0 after 0 usecs
[ 14.348005] calling chainiv_module_init+0x0/0x39 @ 1
[ 14.352031] initcall chainiv_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.356005] calling eseqiv_module_init+0x0/0x39 @ 1
[ 14.360008] initcall eseqiv_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.364005] calling seqiv_module_init+0x0/0x39 @ 1
[ 14.368008] initcall seqiv_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.372005] calling hmac_module_init+0x0/0x39 @ 1
[ 14.376008] initcall hmac_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.380005] calling crypto_xcbc_module_init+0x0/0x39 @ 1
[ 14.384008] initcall crypto_xcbc_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.388005] calling md4_mod_init+0x0/0x39 @ 1
[ 14.392149] initcall md4_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.396035] calling md5_mod_init+0x0/0x39 @ 1
[ 14.400122] initcall md5_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.404057] calling rmd128_mod_init+0x0/0x39 @ 1
[ 14.408130] initcall rmd128_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.412027] calling rmd256_mod_init+0x0/0x39 @ 1
[ 14.416127] initcall rmd256_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.420029] calling rmd320_mod_init+0x0/0x39 @ 1
[ 14.424131] initcall rmd320_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.428024] calling sha1_generic_mod_init+0x0/0x39 @ 1
[ 14.436065] initcall sha1_generic_mod_init+0x0/0x39 returned 0 after 3906 usecs
[ 14.440012] calling sha256_generic_mod_init+0x0/0x65 @ 1
[ 14.444236] initcall sha256_generic_mod_init+0x0/0x65 returned 0 after 0 usecs
[ 14.448025] calling sha512_generic_mod_init+0x0/0x65 @ 1
[ 14.452240] initcall sha512_generic_mod_init+0x0/0x65 returned 0 after 0 usecs
[ 14.456035] calling wp512_mod_init+0x0/0x8a @ 1
[ 14.460446] initcall wp512_mod_init+0x0/0x8a returned 0 after 0 usecs
[ 14.464038] calling crypto_ecb_module_init+0x0/0x39 @ 1
[ 14.468008] initcall crypto_ecb_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.472005] calling crypto_cbc_module_init+0x0/0x39 @ 1
[ 14.476008] initcall crypto_cbc_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.480005] calling crypto_pcbc_module_init+0x0/0x39 @ 1
[ 14.484008] initcall crypto_pcbc_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.488005] calling crypto_cts_module_init+0x0/0x39 @ 1
[ 14.492008] initcall crypto_cts_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.496005] calling crypto_module_init+0x0/0x39 @ 1
[ 14.500008] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.504005] calling crypto_ctr_module_init+0x0/0x69 @ 1
[ 14.508011] initcall crypto_ctr_module_init+0x0/0x69 returned 0 after 0 usecs
[ 14.512005] calling crypto_ccm_module_init+0x0/0x87 @ 1
[ 14.516013] initcall crypto_ccm_module_init+0x0/0x87 returned 0 after 0 usecs
[ 14.520005] calling cryptd_init+0x0/0xc7 @ 1
[ 14.524011] initcall cryptd_init+0x0/0xc7 returned 0 after 0 usecs
[ 14.528005] calling des_generic_mod_init+0x0/0x65 @ 1
[ 14.532262] initcall des_generic_mod_init+0x0/0x65 returned 0 after 0 usecs
[ 14.536052] calling fcrypt_mod_init+0x0/0x39 @ 1
[ 14.540071] alg: No test for fcrypt (fcrypt-generic)
[ 14.544071] initcall fcrypt_mod_init+0x0/0x39 returned 0 after 3906 usecs
[ 14.548019] calling blowfish_mod_init+0x0/0x39 @ 1
[ 14.552932] initcall blowfish_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.556031] calling twofish_mod_init+0x0/0x39 @ 1
[ 14.560275] initcall twofish_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.564025] calling aes_init+0x0/0x39 @ 1
[ 14.568146] initcall aes_init+0x0/0x39 returned 0 after 0 usecs
[ 14.572026] calling cast5_mod_init+0x0/0x39 @ 1
[ 14.576139] initcall cast5_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.580024] calling arc4_init+0x0/0x39 @ 1
[ 14.584143] initcall arc4_init+0x0/0x39 returned 0 after 0 usecs
[ 14.588024] calling tea_mod_init+0x0/0x8a @ 1
[ 14.592343] initcall tea_mod_init+0x0/0x8a returned 0 after 0 usecs
[ 14.596026] calling khazad_mod_init+0x0/0x39 @ 1
[ 14.600141] initcall khazad_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.604049] calling anubis_mod_init+0x0/0x39 @ 1
[ 14.608181] initcall anubis_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.612025] calling seed_init+0x0/0x39 @ 1
[ 14.616130] initcall seed_init+0x0/0x39 returned 0 after 0 usecs
[ 14.620031] calling salsa20_generic_mod_init+0x0/0x39 @ 1
[ 14.624101] initcall salsa20_generic_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.628024] calling deflate_mod_init+0x0/0x39 @ 1
[ 14.632647] initcall deflate_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.636028] calling zlib_mod_init+0x0/0x39 @ 1
[ 14.640723] initcall zlib_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.648019] calling crc32c_mod_init+0x0/0x39 @ 1
[ 14.652182] initcall crc32c_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.656025] calling crypto_authenc_module_init+0x0/0x39 @ 1
[ 14.660008] initcall crypto_authenc_module_init+0x0/0x39 returned 0 after 0 usecs
[ 14.664004] calling lzo_mod_init+0x0/0x39 @ 1
[ 14.668149] initcall lzo_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 14.672024] calling krng_mod_init+0x0/0x39 @ 1
[ 14.676070] alg: No test for stdrng (krng)
[ 14.680055] initcall krng_mod_init+0x0/0x39 returned 0 after 3906 usecs
[ 14.684012] calling prng_mod_init+0x0/0x4e @ 1
[ 14.688070] alg: No test for stdrng (ansi_cprng)
[ 14.692056] initcall prng_mod_init+0x0/0x4e returned 0 after 3906 usecs
[ 14.696008] calling proc_genhd_init+0x0/0x63 @ 1
[ 14.700029] initcall proc_genhd_init+0x0/0x63 returned 0 after 0 usecs
[ 14.704004] calling noop_init+0x0/0x3b @ 1
[ 14.708035] io scheduler noop registered
[ 14.712005] initcall noop_init+0x0/0x3b returned 0 after 3906 usecs
[ 14.716004] calling as_init+0x0/0x3b @ 1
[ 14.720004] io scheduler anticipatory registered (default)
[ 14.724004] initcall as_init+0x0/0x3b returned 0 after 3906 usecs
[ 14.728004] calling deadline_init+0x0/0x3b @ 1
[ 14.732004] io scheduler deadline registered
[ 14.736004] initcall deadline_init+0x0/0x3b returned 0 after 3906 usecs
[ 14.740004] calling debug_objects_init_debugfs+0x0/0x8a @ 1
[ 14.744047] initcall debug_objects_init_debugfs+0x0/0x8a returned 0 after 0 usecs
[ 14.748004] calling libcrc32c_mod_init+0x0/0x53 @ 1
[ 14.752009] initcall libcrc32c_mod_init+0x0/0x53 returned 0 after 0 usecs
[ 14.756004] calling init_kmp+0x0/0x39 @ 1
[ 14.760021] initcall init_kmp+0x0/0x39 returned 0 after 0 usecs
[ 14.764004] calling init_bm+0x0/0x39 @ 1
[ 14.768005] initcall init_bm+0x0/0x39 returned 0 after 0 usecs
[ 14.772004] calling init_fsm+0x0/0x39 @ 1
[ 14.776005] initcall init_fsm+0x0/0x39 returned 0 after 0 usecs
[ 14.780004] calling dynamic_debug_init+0x0/0x14f @ 1
[ 14.784617] initcall dynamic_debug_init+0x0/0x14f returned 0 after 0 usecs
[ 14.788006] calling pci_init+0x0/0x60 @ 1
[ 14.792014] agpgart-amd64 0000:00:00.0: calling via_no_dac+0x0/0x7f
[ 14.796009] agpgart-amd64 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.800006] agpgart-amd64 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.804006] agpgart-amd64 0000:00:00.0: calling pci_fixup_video+0x0/0xe3
[ 14.808010] pci 0000:00:01.0: calling via_no_dac+0x0/0x7f
[ 14.812003] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 14.816005] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.820005] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.824005] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xe3
[ 14.828009] pci 0000:00:07.0: calling via_no_dac+0x0/0x7f
[ 14.832006] pci 0000:00:07.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.836005] pci 0000:00:07.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.840005] pci 0000:00:07.0: calling pci_fixup_video+0x0/0xe3
[ 14.844010] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.848005] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.852005] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xe3
[ 14.856010] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.860005] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.864005] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xe3
[ 14.868010] pci 0000:00:0d.1: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.872005] pci 0000:00:0d.1: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.876005] pci 0000:00:0d.1: calling pci_fixup_video+0x0/0xe3
[ 14.880009] pci 0000:00:0f.0: calling via_no_dac+0x0/0x7f
[ 14.884005] pci 0000:00:0f.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.888005] pci 0000:00:0f.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.892005] pci 0000:00:0f.0: calling pci_fixup_video+0x0/0xe3
[ 14.896009] pci 0000:00:0f.1: calling via_no_dac+0x0/0x7f
[ 14.900005] pci 0000:00:0f.1: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.904005] pci 0000:00:0f.1: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.908005] pci 0000:00:0f.1: calling pci_fixup_video+0x0/0xe3
[ 14.912009] pci 0000:00:10.0: calling via_no_dac+0x0/0x7f
[ 14.916005] pci 0000:00:10.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.920005] pci 0000:00:10.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.924009] pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x8030
[ 14.928003] pci 0000:00:10.0: Performing full reset
[ 14.932014] pci 0000:00:10.0: calling pci_fixup_video+0x0/0xe3
[ 14.936010] pci 0000:00:10.1: calling via_no_dac+0x0/0x7f
[ 14.940005] pci 0000:00:10.1: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.944005] pci 0000:00:10.1: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.948007] pci 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x8030
[ 14.952003] pci 0000:00:10.1: Performing full reset
[ 14.956013] pci 0000:00:10.1: calling pci_fixup_video+0x0/0xe3
[ 14.960010] pci 0000:00:10.2: calling via_no_dac+0x0/0x7f
[ 14.964005] pci 0000:00:10.2: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.968005] pci 0000:00:10.2: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.972007] pci 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x8030
[ 14.976003] pci 0000:00:10.2: Performing full reset
[ 14.980013] pci 0000:00:10.2: calling pci_fixup_video+0x0/0xe3
[ 14.984010] pci 0000:00:10.3: calling via_no_dac+0x0/0x7f
[ 14.988005] pci 0000:00:10.3: calling quirk_cardbus_legacy+0x0/0x4e
[ 14.992005] pci 0000:00:10.3: calling quirk_usb_early_handoff+0x0/0xb6
[ 14.996007] pci 0000:00:10.3: uhci_check_and_reset_hc: legsup = 0x8030
[ 15.000003] pci 0000:00:10.3: Performing full reset
[ 15.004013] pci 0000:00:10.3: calling pci_fixup_video+0x0/0xe3
[ 15.008010] pci 0000:00:10.4: calling via_no_dac+0x0/0x7f
[ 15.012005] pci 0000:00:10.4: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.016005] pci 0000:00:10.4: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.020047] pci 0000:00:10.4: calling pci_fixup_video+0x0/0xe3
[ 15.024010] pci 0000:00:11.0: calling via_no_dac+0x0/0x7f
[ 15.028005] pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.032005] pci 0000:00:11.0: calling quirk_via_vt8237_bypass_apic_deassert+0x0/0x9e
[ 15.036007] pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.040005] pci 0000:00:11.0: calling pci_fixup_video+0x0/0xe3
[ 15.044009] pci 0000:00:11.5: calling via_no_dac+0x0/0x7f
[ 15.048005] pci 0000:00:11.5: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.052005] pci 0000:00:11.5: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.056005] pci 0000:00:11.5: calling pci_fixup_video+0x0/0xe3
[ 15.060009] pci 0000:00:11.6: calling via_no_dac+0x0/0x7f
[ 15.064005] pci 0000:00:11.6: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.068005] pci 0000:00:11.6: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.072005] pci 0000:00:11.6: calling pci_fixup_video+0x0/0xe3
[ 15.076010] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.080005] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.084005] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xe3
[ 15.088010] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.092005] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.096005] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xe3
[ 15.100010] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.104005] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.108005] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xe3
[ 15.112010] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.116005] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.120005] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xe3
[ 15.124010] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.128005] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.132005] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xe3
[ 15.136007] pci 0000:01:00.0: Boot video device
[ 15.140010] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x4e
[ 15.144005] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0xb6
[ 15.148005] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xe3
[ 15.152009] initcall pci_init+0x0/0x60 returned 0 after 351562 usecs
[ 15.156005] calling pci_proc_init+0x0/0x90 @ 1
[ 15.164141] initcall pci_proc_init+0x0/0x90 returned 0 after 3906 usecs
[ 15.168004] calling pcie_portdrv_init+0x0/0x72 @ 1
[ 15.176528] initcall pcie_portdrv_init+0x0/0x72 returned 0 after 3906 usecs
[ 15.180009] calling aer_service_init+0x0/0x47 @ 1
[ 15.184241] initcall aer_service_init+0x0/0x47 returned 0 after 0 usecs
[ 15.188063] calling pci_stub_init+0x0/0x42 @ 1
[ 15.192265] initcall pci_stub_init+0x0/0x42 returned 0 after 0 usecs
[ 15.196033] calling platform_lcd_init+0x0/0x39 @ 1
[ 15.204182] initcall platform_lcd_init+0x0/0x39 returned 0 after 3906 usecs
[ 15.208048] calling genericbl_init+0x0/0x39 @ 1
[ 15.212241] initcall genericbl_init+0x0/0x39 returned 0 after 0 usecs
[ 15.216040] calling progearbl_init+0x0/0x7b @ 1
[ 15.224157] ALI M7101 PMU not found.
[ 15.227862] initcall progearbl_init+0x0/0x7b returned 0 after 3906 usecs
[ 15.228046] calling da903x_backlight_init+0x0/0x39 @ 1
[ 15.232243] initcall da903x_backlight_init+0x0/0x39 returned 0 after 0 usecs
[ 15.236038] calling mbp_init+0x0/0x120 @ 1
[ 15.240007] initcall mbp_init+0x0/0x120 returned -19 after 0 usecs
[ 15.244004] calling kb3886_init+0x0/0x63 @ 1
[ 15.248005] initcall kb3886_init+0x0/0x63 returned -19 after 0 usecs
[ 15.252004] calling display_class_init+0x0/0xa5 @ 1
[ 15.256235] initcall display_class_init+0x0/0xa5 returned 0 after 0 usecs
[ 15.260045] calling regulator_virtual_consumer_init+0x0/0x39 @ 1
[ 15.264243] initcall regulator_virtual_consumer_init+0x0/0x39 returned 0 after 0 usecs
[ 15.268041] calling rand_initialize+0x0/0x58 @ 1
[ 15.272037] initcall rand_initialize+0x0/0x58 returned 0 after 0 usecs
[ 15.276004] calling tty_init+0x0/0x11c @ 1
[ 15.302106] initcall tty_init+0x0/0x11c returned 0 after 19531 usecs
[ 15.304479] calling pty_init+0x0/0x39 @ 1
[ 15.475904] initcall pty_init+0x0/0x39 returned 0 after 160156 usecs
[ 15.476493] calling sysrq_init+0x0/0x4c @ 1
[ 15.480038] initcall sysrq_init+0x0/0x4c returned 0 after 0 usecs
[ 15.484005] calling nozomi_init+0x0/0x153 @ 1
[ 15.488003] Initializing Nozomi driver 2.1d (build date: Jun 11 2009 13:33:50)
[ 15.492327] initcall nozomi_init+0x0/0x153 returned 0 after 3906 usecs
[ 15.496426] calling epca_module_init+0x0/0x32 @ 1
[ 15.500136] DIGI epca driver version 1.3.0.1-LK2.6 loaded.
[ 15.693909] initcall epca_module_init+0x0/0x32 returned 0 after 187500 usecs
[ 15.696495] calling mxser_module_init+0x0/0x230 @ 1
[ 15.700007] MOXA Smartio/Industio family driver version 2.0.4
[ 15.704297] initcall mxser_module_init+0x0/0x230 returned 0 after 3906 usecs
[ 15.712259] calling ip2_loadmain+0x0/0xa24 @ 1
[ 15.716004] Computone IntelliPort Plus multiport driver version 1.2.14
[ 15.720310] initcall ip2_loadmain+0x0/0xa24 returned 0 after 3906 usecs
[ 15.724151] calling riscom8_init_module+0x0/0xb0 @ 1
[ 15.728003] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
[ 15.746536] rc0: RISCom/8 Board at 0x220 not found.
[ 15.752049] rc1: RISCom/8 Board at 0x240 not found.
[ 15.756053] rc2: RISCom/8 Board at 0x250 not found.
[ 15.760053] rc3: RISCom/8 Board at 0x260 not found.
[ 15.797609] rc: No RISCom/8 boards detected.
[ 15.800174] initcall riscom8_init_module+0x0/0xb0 returned -5 after 70312 usecs
[ 15.804005] initcall riscom8_init_module+0x0/0xb0 returned with error code -5
[ 15.808005] calling isicom_init+0x0/0x236 @ 1
[ 15.812349] initcall isicom_init+0x0/0x236 returned 0 after 0 usecs
[ 15.816205] calling synclink_init+0x0/0x15f @ 1
[ 15.820004] SyncLink serial driver $Revision: 4.38 $
[ 15.875585] SyncLink serial driver $Revision: 4.38 $, tty major#252
[ 15.876485] initcall synclink_init+0x0/0x15f returned 0 after 54687 usecs
[ 15.880005] calling slgt_init+0x0/0x1e8 @ 1
[ 15.884003] SyncLink GT
[ 15.888028] SyncLink GT, tty major#251
[ 15.892280] SyncLink GT no devices found
[ 15.896512] initcall slgt_init+0x0/0x1e8 returned 0 after 11718 usecs
[ 15.900006] calling n_hdlc_init+0x0/0xba @ 1
[ 15.904003] HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
[ 15.908004] N_HDLC line discipline registered.
[ 15.912006] initcall n_hdlc_init+0x0/0xba returned 0 after 7812 usecs
[ 15.916004] calling sx_init+0x0/0x10e @ 1
[ 15.920611] initcall sx_init+0x0/0x10e returned 0 after 0 usecs
[ 15.924130] calling rio_init+0x0/0xb98 @ 1
[ 15.934530] initcall rio_init+0x0/0xb98 returned -5 after 3906 usecs
[ 15.936075] initcall rio_init+0x0/0xb98 returned with error code -5
[ 15.940005] calling raw_init+0x0/0x103 @ 1
[ 15.948554] initcall raw_init+0x0/0x103 returned 0 after 3906 usecs
[ 15.952022] calling r3964_init+0x0/0x68 @ 1
[ 15.956003] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 15.960008] initcall r3964_init+0x0/0x68 returned 0 after 3906 usecs
[ 15.964005] calling applicom_init+0x0/0x4e9 @ 1
[ 15.968003] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[ 15.972024] ac.o: No PCI boards found.
[ 15.976003] ac.o: For an ISA board you must supply memory and irq parameters.
[ 15.980005] initcall applicom_init+0x0/0x4e9 returned -6 after 11718 usecs
[ 15.984006] initcall applicom_init+0x0/0x4e9 returned with error code -6
[ 15.988005] calling rtc_generic_init+0x0/0x8a @ 1
[ 15.992003] Generic RTC Driver v1.07
[ 15.996318] initcall rtc_generic_init+0x0/0x8a returned 0 after 3906 usecs
[ 16.000076] calling nvram_init+0x0/0xaa @ 1
[ 16.004311] Non-volatile memory driver v1.3
[ 16.008044] initcall nvram_init+0x0/0xaa returned 0 after 3906 usecs
[ 16.012006] calling i8k_init+0x0/0x78 @ 1
[ 16.016008] initcall i8k_init+0x0/0x78 returned -19 after 0 usecs
[ 16.020006] calling tlclk_init+0x0/0x241 @ 1
[ 16.024017] telclk_interrup = 0xf non-mcpbl0010 hw.
[ 16.028022] initcall tlclk_init+0x0/0x241 returned -6 after 3906 usecs
[ 16.032006] initcall tlclk_init+0x0/0x241 returned with error code -6
[ 16.036004] calling agp_init+0x0/0x4b @ 1
[ 16.040003] Linux agpgart interface v0.103
[ 16.044006] initcall agp_init+0x0/0x4b returned 0 after 3906 usecs
[ 16.048004] calling agp_intel_init+0x0/0x50 @ 1
[ 16.052288] initcall agp_intel_init+0x0/0x50 returned 0 after 0 usecs
[ 16.056057] calling agp_sis_init+0x0/0x50 @ 1
[ 16.064203] initcall agp_sis_init+0x0/0x50 returned 0 after 3906 usecs
[ 16.068020] calling init_ipwireless+0x0/0x63 @ 1
[ 16.072003] ipwireless 1.1 by Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba
[ 16.076260] initcall init_ipwireless+0x0/0x63 returned 0 after 3906 usecs
[ 16.080051] calling cmm_init+0x0/0xe3 @ 1
[ 16.084003] cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte
[ 16.088483] initcall cmm_init+0x0/0xe3 returned 0 after 3906 usecs
[ 16.092042] calling ipmi_init_msghandler_mod+0x0/0x34 @ 1
[ 16.096245] ipmi message handler version 39.2
[ 16.100092] initcall ipmi_init_msghandler_mod+0x0/0x34 returned 0 after 3906 usecs
[ 16.104006] calling init_ipmi_devintf+0x0/0x120 @ 1
[ 16.108003] ipmi device interface
[ 16.112313] initcall init_ipmi_devintf+0x0/0x120 returned 0 after 3906 usecs
[ 16.116049] calling init_ipmi_si+0x0/0x286 @ 1
[ 16.120247] IPMI System Interface driver.
[ 16.128864] ipmi_si: Unable to find any System Interface(s)
[ 16.132021] initcall init_ipmi_si+0x0/0x286 returned -19 after 11718 usecs
[ 16.136006] calling ipmi_poweroff_init+0x0/0xb9 @ 1
[ 16.140005] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 16.144003] IPMI poweroff: Unable to register powercycle sysctl
[ 16.148005] initcall ipmi_poweroff_init+0x0/0xb9 returned -12 after 7812 usecs
[ 16.152006] initcall ipmi_poweroff_init+0x0/0xb9 returned with error code -12
[ 16.156005] calling hangcheck_init+0x0/0xbf @ 1
[ 16.160004] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 16.164004] Hangcheck: Using get_cycles().
[ 16.168006] initcall hangcheck_init+0x0/0xbf returned 0 after 7812 usecs
[ 16.172006] calling drm_core_init+0x0/0x14a @ 1
[ 16.176283] [drm] Initialized drm 1.1.0 20060810
[ 16.180111] initcall drm_core_init+0x0/0x14a returned 0 after 3906 usecs
[ 16.184005] calling tdfx_init+0x0/0x39 @ 1
[ 16.188095] initcall tdfx_init+0x0/0x39 returned 0 after 0 usecs
[ 16.192005] calling r128_init+0x0/0x45 @ 1
[ 16.200257] initcall r128_init+0x0/0x45 returned 0 after 3906 usecs
[ 16.204005] calling radeon_init+0x0/0x45 @ 1
[ 16.212707] IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1)
[ 16.216009] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 16.220797] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
[ 16.231307] initcall radeon_init+0x0/0x45 returned 0 after 19531 usecs
[ 16.232005] calling i810_init+0x0/0x45 @ 1
[ 16.236071] initcall i810_init+0x0/0x45 returned 0 after 0 usecs
[ 16.240005] calling via_init+0x0/0x4a @ 1
[ 16.244151] initcall via_init+0x0/0x4a returned 0 after 0 usecs
[ 16.248006] calling cn_proc_init+0x0/0x63 @ 1
[ 16.252013] initcall cn_proc_init+0x0/0x63 returned 0 after 0 usecs
[ 16.256005] calling serial8250_init+0x0/0x16f @ 1
[ 16.260005] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 16.264519] async_waiting @ 1
[ 16.268091] async_continuing @ 1 after 0 usec
[ 16.400325] async_waiting @ 1
[ 16.403402] async_continuing @ 1 after 0 usec
ÿ[ 16.536379] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.540826] async_waiting @ 1
[ 16.544014] async_continuing @ 1 after 0 usec
[ 16.676319] async_waiting @ 1
[ 16.679396] async_continuing @ 1 after 0 usec
[ 16.812373] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.817463] initcall serial8250_init+0x0/0x16f returned 0 after 542968 usecs
[ 16.820014] calling serial8250_pci_init+0x0/0x42 @ 1
[ 16.824308] initcall serial8250_pci_init+0x0/0x42 returned 0 after 0 usecs
[ 16.828124] calling init_serial_cs+0x0/0x39 @ 1
[ 16.832278] initcall init_serial_cs+0x0/0x39 returned 0 after 0 usecs
[ 16.836043] calling floppy_init+0x0/0x596 @ 1
[ 16.844075] Floppy drive(s): fd0 is 1.44M
[ 16.867972] FDC 0 is a post-1991 82077
[ 16.873883] initcall floppy_init+0x0/0x596 returned 0 after 31250 usecs
[ 16.876012] calling brd_init+0x0/0x193 @ 1
[ 16.891361] brd: module loaded
[ 16.892535] initcall brd_init+0x0/0x193 returned 0 after 11718 usecs
[ 16.896007] calling loop_init+0x0/0x1bc @ 1
[ 16.907734] loop: module loaded
[ 16.908108] initcall loop_init+0x0/0x1bc returned 0 after 7812 usecs
[ 16.912005] calling cpqarray_init+0x0/0x92 @ 1
[ 16.916003] Compaq SMART2 Driver (v 2.6.0)
[ 16.920546] initcall cpqarray_init+0x0/0x92 returned -19 after 3906 usecs
[ 16.924413] calling cciss_init+0x0/0x4e @ 1
[ 16.928018] HP CISS Driver (v 3.6.20)
[ 16.932279] initcall cciss_init+0x0/0x4e returned 0 after 3906 usecs
[ 16.936098] calling pkt_init+0x0/0x1f9 @ 1
[ 16.940940] initcall pkt_init+0x0/0x1f9 returned 0 after 0 usecs
[ 16.944155] calling nbd_init+0x0/0x304 @ 1
[ 16.952017] nbd: registered device at major 43
[ 16.967854] initcall nbd_init+0x0/0x304 returned 0 after 15625 usecs
[ 16.968505] calling init+0x0/0x51 @ 1
[ 16.972261] initcall init+0x0/0x51 returned 0 after 0 usecs
[ 16.976425] calling ub_init+0x0/0xae @ 1
[ 16.980290] usbcore: registered new interface driver ub
[ 16.984165] initcall ub_init+0x0/0xae returned 0 after 3906 usecs
[ 16.988005] calling pasic3_base_init+0x0/0x40 @ 1
[ 16.992505] initcall pasic3_base_init+0x0/0x40 returned -19 after 0 usecs
[ 16.996176] calling wm8400_module_init+0x0/0x59 @ 1
[ 17.000252] initcall wm8400_module_init+0x0/0x59 returned 0 after 0 usecs
[ 17.004094] calling da903x_init+0x0/0x3b @ 1
[ 17.008245] initcall da903x_init+0x0/0x3b returned 0 after 0 usecs
[ 17.012079] calling scsi_tgt_init+0x0/0xb1 @ 1
[ 17.017018] initcall scsi_tgt_init+0x0/0xb1 returned 0 after 0 usecs
[ 17.020055] calling spi_transport_init+0x0/0x55 @ 1
[ 17.024499] initcall spi_transport_init+0x0/0x55 returned 0 after 0 usecs
[ 17.028074] calling fc_transport_init+0x0/0x73 @ 1
[ 17.032912] initcall fc_transport_init+0x0/0x73 returned 0 after 0 usecs
[ 17.036070] calling iscsi_transport_init+0x0/0x173 @ 1
[ 17.040005] Loading iSCSI transport class v2.0-870.
[ 17.045277] initcall iscsi_transport_init+0x0/0x173 returned 0 after 3906 usecs
[ 17.048128] calling scsi_dh_init+0x0/0x65 @ 1
[ 17.052010] initcall scsi_dh_init+0x0/0x65 returned 0 after 0 usecs
[ 17.056005] calling rdac_init+0x0/0x55 @ 1
[ 17.060024] rdac: device handler registered
[ 17.064007] initcall rdac_init+0x0/0x55 returned 0 after 3906 usecs
[ 17.068005] calling hp_sw_init+0x0/0x39 @ 1
[ 17.072005] hp_sw: device handler registered
[ 17.076006] initcall hp_sw_init+0x0/0x39 returned 0 after 3906 usecs
[ 17.080005] calling clariion_init+0x0/0x5c @ 1
[ 17.084004] emc: device handler registered
[ 17.088006] initcall clariion_init+0x0/0x5c returned 0 after 3906 usecs
[ 17.092006] calling alua_init+0x0/0x5c @ 1
[ 17.096004] alua: device handler registered
[ 17.100009] initcall alua_init+0x0/0x5c returned 0 after 3906 usecs
[ 17.104005] calling libfc_init+0x0/0x9d @ 1
[ 17.108803] initcall libfc_init+0x0/0x9d returned 0 after 0 usecs
[ 17.112163] calling fcoe_init+0x0/0x178 @ 1
[ 17.116135] initcall fcoe_init+0x0/0x178 returned 0 after 0 usecs
[ 17.120096] calling fnic_init_module+0x0/0x20d @ 1
[ 17.124005] fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
[ 17.129451] initcall fnic_init_module+0x0/0x20d returned 0 after 3906 usecs
[ 17.132049] calling BusLogic_init+0x0/0x5b2 @ 1
[ 17.136135] initcall BusLogic_init+0x0/0x5b2 returned 0 after 0 usecs
[ 17.140006] calling arcmsr_module_init+0x0/0x47 @ 1
[ 17.144278] initcall arcmsr_module_init+0x0/0x47 returned 0 after 0 usecs
[ 17.148140] calling ahc_linux_init+0x0/0x8d @ 1
[ 17.152294] initcall ahc_linux_init+0x0/0x8d returned 0 after 0 usecs
[ 17.156046] calling ahd_linux_init+0x0/0xa7 @ 1
[ 17.160296] initcall ahd_linux_init+0x0/0xa7 returned 0 after 0 usecs
[ 17.164069] calling init_this_scsi_driver+0x0/0x10c @ 1
[ 17.168590] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 0 usecs
[ 17.172008] calling init_this_scsi_driver+0x0/0x10c @ 1
[ 17.176077] scsi: <fdomain> Detection failed (no card)
[ 17.180006] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 3906 usecs
[ 17.184006] calling qla1280_init+0x0/0x42 @ 1
[ 17.188283] initcall qla1280_init+0x0/0x42 returned 0 after 0 usecs
[ 17.192042] calling qla2x00_module_init+0x0/0x152 @ 1
[ 17.196407] QLogic Fibre Channel HBA Driver: 8.03.01-k1
[ 17.200323] initcall qla2x00_module_init+0x0/0x152 returned 0 after 3906 usecs
[ 17.204045] calling qla4xxx_module_init+0x0/0x108 @ 1
[ 17.208673] iscsi: registered transport (qla4xxx)
[ 17.212319] QLogic iSCSI HBA Driver
[ 17.216072] initcall qla4xxx_module_init+0x0/0x108 returned 0 after 7812 usecs
[ 17.220007] calling lpfc_init+0x0/0xfb @ 1
[ 17.224003] Emulex LightPulse Fibre Channel SCSI driver 8.3.1
[ 17.228003] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 17.232313] initcall lpfc_init+0x0/0xfb returned 0 after 7812 usecs
[ 17.236046] calling dmx3191d_init+0x0/0x42 @ 1
[ 17.240273] initcall dmx3191d_init+0x0/0x42 returned 0 after 0 usecs
[ 17.244055] calling sym2_init+0x0/0x129 @ 1
[ 17.248278] initcall sym2_init+0x0/0x129 returned 0 after 0 usecs
[ 17.252048] calling dc395x_module_init+0x0/0x42 @ 1
[ 17.256273] initcall dc395x_module_init+0x0/0x42 returned 0 after 0 usecs
[ 17.260048] calling megaraid_init+0x0/0xdb @ 1
[ 17.264357] initcall megaraid_init+0x0/0xdb returned 0 after 0 usecs
[ 17.268047] calling atp870u_init+0x0/0x42 @ 1
[ 17.276084] initcall atp870u_init+0x0/0x42 returned 0 after 3906 usecs
[ 17.280035] calling gdth_init+0x0/0x11c @ 1
[ 17.284003] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 17.288281] initcall gdth_init+0x0/0x11c returned 0 after 3906 usecs
[ 17.292031] calling tw_init+0x0/0x55 @ 1
[ 17.296003] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 17.300273] initcall tw_init+0x0/0x55 returned 0 after 3906 usecs
[ 17.304041] calling twa_init+0x0/0x55 @ 1
[ 17.308003] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
[ 17.312272] initcall twa_init+0x0/0x55 returned 0 after 3906 usecs
[ 17.320038] calling ipr_init+0x0/0x5c @ 1
[ 17.324003] ipr: IBM Power RAID SCSI Device Driver version: 2.4.2 (January 21, 2009)
[ 17.328282] initcall ipr_init+0x0/0x5c returned 0 after 3906 usecs
[ 17.332044] calling hptiop_module_init+0x0/0x5c @ 1
[ 17.336003] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
[ 17.340274] initcall hptiop_module_init+0x0/0x5c returned 0 after 3906 usecs
[ 17.344045] calling stex_init+0x0/0x55 @ 1
[ 17.348003] stex: Promise SuperTrak EX Driver version: 4.6.0000.3
[ 17.356230] initcall stex_init+0x0/0x55 returned 0 after 7812 usecs
[ 17.360045] calling cxgb3i_init_module+0x0/0x5d @ 1
[ 17.364006] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 17.368260] iscsi: registered transport (cxgb3i)
[ 17.372071] initcall cxgb3i_init_module+0x0/0x5d returned 0 after 7812 usecs
[ 17.376006] calling init_st+0x0/0x129 @ 1
[ 17.380004] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 17.384240] Driver 'st' needs updating - please use bus_type methods
[ 17.388325] initcall init_st+0x0/0x129 returned 0 after 7812 usecs
[ 17.392045] calling init_osst+0x0/0x160 @ 1
[ 17.396004] osst :I: Tape driver with OnStream support version 0.99.4
[ 17.396006] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 17.400242] Driver 'osst' needs updating - please use bus_type methods
[ 17.404286] initcall init_osst+0x0/0x160 returned 0 after 7812 usecs
[ 17.408044] calling init_sd+0x0/0x106 @ 1
[ 17.412262] Driver 'sd' needs updating - please use bus_type methods
[ 17.416277] initcall init_sd+0x0/0x106 returned 0 after 3906 usecs
[ 17.420041] calling init_sg+0x0/0xec @ 1
[ 17.424281] initcall init_sg+0x0/0xec returned 0 after 0 usecs
[ 17.428041] calling init_ch_module+0x0/0xcd @ 1
[ 17.432003] SCSI Media Changer driver v0.25
[ 17.436243] Driver 'ch' needs updating - please use bus_type methods
[ 17.440277] initcall init_ch_module+0x0/0xcd returned 0 after 7812 usecs
[ 17.444042] calling ahci_init+0x0/0x42 @ 1
[ 17.448290] initcall ahci_init+0x0/0x42 returned 0 after 0 usecs
[ 17.452044] calling k2_sata_init+0x0/0x42 @ 1
[ 17.456274] initcall k2_sata_init+0x0/0x42 returned 0 after 0 usecs
[ 17.460044] calling piix_init+0x0/0x50 @ 1
[ 17.464277] initcall piix_init+0x0/0x50 returned 0 after 0 usecs
[ 17.468043] calling sil24_init+0x0/0x42 @ 1
[ 17.472275] initcall sil24_init+0x0/0x42 returned 0 after 0 usecs
[ 17.476042] calling svia_init+0x0/0x42 @ 1
[ 17.480041] sata_via 0000:00:0f.0: version 2.4
[ 17.484031] IOAPIC[0]: Set routing entry (2-20 -> 0x61 -> IRQ 20 Mode:1 Active:1)
[ 17.488008] sata_via 0000:00:0f.0: PCI->APIC IRQ transform: INT B -> IRQ 20
[ 17.492009] sata_via 0000:00:0f.0: calling quirk_via_vlink+0x0/0xf8
[ 17.496091] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 17.500239] scsi0 : sata_via
[ 17.508413] scsi1 : sata_via
[ 17.511748] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20
[ 17.512065] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20
[ 17.720010] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 17.728019] async_waiting @ 1
[ 17.731100] async_continuing @ 1 after 0 usec
[ 17.732009] async_waiting @ 1
[ 17.735083] async_continuing @ 1 after 0 usec
[ 17.940010] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 17.948013] async_waiting @ 1
[ 17.951093] async_continuing @ 1 after 0 usec
[ 17.952273] initcall svia_init+0x0/0x42 returned 0 after 460937 usecs
[ 17.956011] calling sis_init+0x0/0x42 @ 1
[ 17.960276] initcall sis_init+0x0/0x42 returned 0 after 0 usecs
[ 17.964032] calling pdc_sata_init+0x0/0x42 @ 1
[ 17.968290] initcall pdc_sata_init+0x0/0x42 returned 0 after 0 usecs
[ 17.972037] calling nv_init+0x0/0x42 @ 1
[ 17.976274] initcall nv_init+0x0/0x42 returned 0 after 0 usecs
[ 17.980037] calling mv_init+0x0/0x6e @ 1
[ 17.988236] initcall mv_init+0x0/0x6e returned 0 after 3906 usecs
[ 17.992040] calling ali_init+0x0/0x74 @ 1
[ 17.996294] initcall ali_init+0x0/0x74 returned 0 after 0 usecs
[ 18.000045] calling amd_init+0x0/0x42 @ 1
[ 18.004289] initcall amd_init+0x0/0x42 returned 0 after 0 usecs
[ 18.008043] calling atiixp_init+0x0/0x42 @ 1
[ 18.012282] initcall atiixp_init+0x0/0x42 returned 0 after 0 usecs
[ 18.016043] calling cmd640_init+0x0/0x42 @ 1
[ 18.020277] initcall cmd640_init+0x0/0x42 returned 0 after 0 usecs
[ 18.024044] calling cmd64x_init+0x0/0x42 @ 1
[ 18.028277] initcall cmd64x_init+0x0/0x42 returned 0 after 0 usecs
[ 18.032042] calling cy82c693_init+0x0/0x42 @ 1
[ 18.036284] initcall cy82c693_init+0x0/0x42 returned 0 after 0 usecs
[ 18.040041] calling efar_init+0x0/0x42 @ 1
[ 18.044273] initcall efar_init+0x0/0x42 returned 0 after 0 usecs
[ 18.048043] calling hpt36x_init+0x0/0x42 @ 1
[ 18.052278] initcall hpt36x_init+0x0/0x42 returned 0 after 0 usecs
[ 18.056041] calling hpt3x2n_init+0x0/0x42 @ 1
[ 18.060275] initcall hpt3x2n_init+0x0/0x42 returned 0 after 0 usecs
[ 18.064041] calling hpt3x3_init+0x0/0x42 @ 1
[ 18.072186] initcall hpt3x3_init+0x0/0x42 returned 0 after 3906 usecs
[ 18.076041] calling it821x_init+0x0/0x42 @ 1
[ 18.080277] initcall it821x_init+0x0/0x42 returned 0 after 0 usecs
[ 18.084043] calling jmicron_init+0x0/0x42 @ 1
[ 18.088284] initcall jmicron_init+0x0/0x42 returned 0 after 0 usecs
[ 18.092042] calling ninja32_init+0x0/0x42 @ 1
[ 18.096278] initcall ninja32_init+0x0/0x42 returned 0 after 0 usecs
[ 18.100045] calling ns87410_init+0x0/0x42 @ 1
[ 18.104281] initcall ns87410_init+0x0/0x42 returned 0 after 0 usecs
[ 18.108042] calling ns87415_init+0x0/0x42 @ 1
[ 18.112273] initcall ns87415_init+0x0/0x42 returned 0 after 0 usecs
[ 18.116041] calling optidma_init+0x0/0x42 @ 1
[ 18.120277] initcall optidma_init+0x0/0x42 returned 0 after 0 usecs
[ 18.124041] calling marvell_init+0x0/0x42 @ 1
[ 18.128273] initcall marvell_init+0x0/0x42 returned 0 after 0 usecs
[ 18.132044] calling oldpiix_init+0x0/0x42 @ 1
[ 18.136275] initcall oldpiix_init+0x0/0x42 returned 0 after 0 usecs
[ 18.140041] calling pcmcia_init+0x0/0x39 @ 1
[ 18.144269] initcall pcmcia_init+0x0/0x39 returned 0 after 0 usecs
[ 18.148042] calling sc1200_init+0x0/0x42 @ 1
[ 18.152276] initcall sc1200_init+0x0/0x42 returned 0 after 0 usecs
[ 18.156043] calling serverworks_init+0x0/0x42 @ 1
[ 18.160277] initcall serverworks_init+0x0/0x42 returned 0 after 0 usecs
[ 18.164043] calling sil680_init+0x0/0x42 @ 1
[ 18.168275] initcall sil680_init+0x0/0x42 returned 0 after 0 usecs
[ 18.172042] calling via_init+0x0/0x42 @ 1
[ 18.176042] pata_via 0000:00:0f.1: version 0.3.4
[ 18.180019] pata_via 0000:00:0f.1: PCI->APIC IRQ transform: INT A -> IRQ 20
[ 18.184006] pata_via 0000:00:0f.1: calling quirk_via_vlink+0x0/0xf8
[ 18.188410] scsi2 : pata_via
[ 18.192159] scsi3 : pata_via
[ 18.195495] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 18.196026] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 18.360021] async_waiting @ 1
[ 18.364004] async_continuing @ 1 after 0 usec
[ 18.368007] async_waiting @ 1
[ 18.372007] async_continuing @ 1 after 0 usec
[ 18.568656] ata4.01: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[ 18.572006] ata4.01: 488397168 sectors, multi 16: LBA48
[ 18.600511] ata4.01: configured for UDMA/100
[ 18.604013] async_waiting @ 1
[ 18.607089] async_continuing @ 1 after 0 usec
[ 18.608637] scsi 3:0:1:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
[ 18.613444] sd 3:0:1:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 18.616076] sd 3:0:1:0: [sda] Write Protect is off
[ 18.620060] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 18.624125] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.628933] sda: sda1 sda2
[ 18.662352] sd 3:0:1:0: [sda] Attached SCSI disk
[ 18.668600] sd 3:0:1:0: Attached scsi generic sg0 type 0
[ 18.672345] initcall via_init+0x0/0x42 returned 0 after 484375 usecs
[ 18.676076] calling sl82c105_init+0x0/0x42 @ 1
[ 18.680285] initcall sl82c105_init+0x0/0x42 returned 0 after 0 usecs
[ 18.684045] calling sis_init+0x0/0x42 @ 1
[ 18.688273] initcall sis_init+0x0/0x42 returned 0 after 0 usecs
[ 18.692056] calling triflex_init+0x0/0x42 @ 1
[ 18.696281] initcall triflex_init+0x0/0x42 returned 0 after 0 usecs
[ 18.700049] calling sch_init+0x0/0x42 @ 1
[ 18.704272] initcall sch_init+0x0/0x42 returned 0 after 0 usecs
[ 18.708048] calling ata_generic_init+0x0/0x42 @ 1
[ 18.712280] initcall ata_generic_init+0x0/0x42 returned 0 after 0 usecs
[ 18.716047] calling e1000_init_module+0x0/0x8f @ 1
[ 18.720005] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 18.724003] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 18.728287] initcall e1000_init_module+0x0/0x8f returned 0 after 7812 usecs
[ 18.732050] calling igb_init_module+0x0/0x7b @ 1
[ 18.736004] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 18.740003] Copyright (c) 2007-2009 Intel Corporation.
[ 18.744276] initcall igb_init_module+0x0/0x7b returned 0 after 7812 usecs
[ 18.748047] calling igbvf_init_module+0x0/0x8f @ 1
[ 18.752004] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[ 18.756004] Copyright (c) 2009 Intel Corporation.
[ 18.760273] initcall igbvf_init_module+0x0/0x8f returned 0 after 7812 usecs
[ 18.764046] calling ixgb_init_module+0x0/0x71 @ 1
[ 18.768005] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 18.772004] Copyright (c) 1999-2008 Intel Corporation.
[ 18.776277] initcall ixgb_init_module+0x0/0x71 returned 0 after 7812 usecs
[ 18.780048] calling ipg_init_module+0x0/0x42 @ 1
[ 18.784273] initcall ipg_init_module+0x0/0x42 returned 0 after 0 usecs
[ 18.788047] calling cxgb3_init_module+0x0/0x47 @ 1
[ 18.792274] initcall cxgb3_init_module+0x0/0x47 returned 0 after 0 usecs
[ 18.796047] calling vcan_init_module+0x0/0x5c @ 1
[ 18.800005] vcan: Virtual CAN interface driver
[ 18.804008] initcall vcan_init_module+0x0/0x5c returned 0 after 3906 usecs
[ 18.808004] calling bonding_init+0x0/0x10f @ 1
[ 18.812004] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
[ 18.816006] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[ 18.821049] initcall bonding_init+0x0/0x10f returned 0 after 7812 usecs
[ 18.824046] calling atl1_init_module+0x0/0x42 @ 1
[ 18.828329] initcall atl1_init_module+0x0/0x42 returned 0 after 0 usecs
[ 18.832046] calling atl2_init_module+0x0/0x71 @ 1
[ 18.836003] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 18.840004] Copyright (c) 2007 Atheros Corporation.
[ 18.844271] initcall atl2_init_module+0x0/0x71 returned 0 after 7812 usecs
[ 18.848046] calling atl1e_init_module+0x0/0x42 @ 1
[ 18.852273] initcall atl1e_init_module+0x0/0x42 returned 0 after 0 usecs
[ 18.856045] calling atl1c_init_module+0x0/0x42 @ 1
[ 18.860276] initcall atl1c_init_module+0x0/0x42 returned 0 after 0 usecs
[ 18.864047] calling bdx_module_init+0x0/0xb0 @ 1
[ 18.868004] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[ 18.872003] tehuti: Options: hw_csum
[ 18.876276] initcall bdx_module_init+0x0/0xb0 returned 0 after 7812 usecs
[ 18.880047] calling enic_init_module+0x0/0x5c @ 1
[ 18.884003] enic: Cisco 10G Ethernet Driver, ver 1.0.0.933
[ 18.888270] initcall enic_init_module+0x0/0x5c returned 0 after 3906 usecs
[ 18.892047] calling jme_init_module+0x0/0x55 @ 1
[ 18.896003] jme: JMicron JMC2XX ethernet driver version 1.0.4
[ 18.900272] initcall jme_init_module+0x0/0x55 returned 0 after 3906 usecs
[ 18.904046] calling be_init_module+0x0/0x9d @ 1
[ 18.908278] initcall be_init_module+0x0/0x9d returned 0 after 0 usecs
[ 18.912048] calling happy_meal_probe+0x0/0x42 @ 1
[ 18.916268] initcall happy_meal_probe+0x0/0x42 returned 0 after 0 usecs
[ 18.920045] calling cas_init+0x0/0x64 @ 1
[ 18.924281] initcall cas_init+0x0/0x64 returned 0 after 0 usecs
[ 18.928047] calling vortex_init+0x0/0xd7 @ 1
[ 18.932273] initcall vortex_init+0x0/0xd7 returned 0 after 0 usecs
[ 18.936048] calling ne2k_pci_init+0x0/0x42 @ 1
[ 18.940270] initcall ne2k_pci_init+0x0/0x42 returned 0 after 0 usecs
[ 18.944046] calling pcnet32_init_module+0x0/0x154 @ 1
[ 18.948005] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 18.952277] initcall pcnet32_init_module+0x0/0x154 returned 0 after 3906 usecs
[ 18.956045] calling e100_init_module+0x0/0x81 @ 1
[ 18.960005] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 18.964003] e100: Copyright(c) 1999-2006 Intel Corporation
[ 18.968274] initcall e100_init_module+0x0/0x81 returned 0 after 7812 usecs
[ 18.972049] calling tlan_probe+0x0/0x108 @ 1
[ 18.976003] ThunderLAN driver v1.15a
[ 18.980268] TLAN: 0 devices installed, PCI: 0 EISA: 0
[ 18.984307] initcall tlan_probe+0x0/0x108 returned -19 after 7812 usecs
[ 18.988046] calling smsc9420_init_module+0x0/0x64 @ 1
[ 18.992270] initcall smsc9420_init_module+0x0/0x64 returned 0 after 0 usecs
[ 18.996047] calling r6040_init+0x0/0x42 @ 1
[ 19.000270] initcall r6040_init+0x0/0x42 returned 0 after 0 usecs
[ 19.004046] calling yellowfin_init+0x0/0x42 @ 1
[ 19.008280] initcall yellowfin_init+0x0/0x42 returned 0 after 0 usecs
[ 19.012048] calling acenic_init+0x0/0x42 @ 1
[ 19.016271] initcall acenic_init+0x0/0x42 returned 0 after 0 usecs
[ 19.020047] calling natsemi_init_mod+0x0/0x42 @ 1
[ 19.024269] initcall natsemi_init_mod+0x0/0x42 returned 0 after 0 usecs
[ 19.028046] calling fealnx_init+0x0/0x42 @ 1
[ 19.032280] initcall fealnx_init+0x0/0x42 returned 0 after 0 usecs
[ 19.036047] calling tg3_init+0x0/0x42 @ 1
[ 19.040280] initcall tg3_init+0x0/0x42 returned 0 after 0 usecs
[ 19.044048] calling bnx2x_init+0x0/0x80 @ 1
[ 19.048334] initcall bnx2x_init+0x0/0x80 returned 0 after 0 usecs
[ 19.052046] calling skge_init_module+0x0/0x80 @ 1
[ 19.056083] IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1)
[ 19.060009] skge 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 19.064016] skge 0000:00:0a.0: PCI: Disallowing DAC for device
[ 19.068043] skge 1.13 addr 0xfd900000 irq 17 chip Yukon rev 1
[ 19.072619] skge eth0: addr 00:0c:6e:b3:3d:c6
[ 19.076300] initcall skge_init_module+0x0/0x80 returned 0 after 19531 usecs
[ 19.080046] calling sky2_init_module+0x0/0x4e @ 1
[ 19.084003] sky2 driver version 1.22
[ 19.088282] initcall sky2_init_module+0x0/0x4e returned 0 after 3906 usecs
[ 19.092048] calling starfire_init+0x0/0x42 @ 1
[ 19.096269] initcall starfire_init+0x0/0x42 returned 0 after 0 usecs
[ 19.100048] calling davicom_init+0x0/0x83 @ 1
[ 19.104722] initcall davicom_init+0x0/0x83 returned 0 after 0 usecs
[ 19.108046] calling lxt_init+0x0/0x65 @ 1
[ 19.112479] initcall lxt_init+0x0/0x65 returned 0 after 0 usecs
[ 19.116103] calling qs6612_init+0x0/0x39 @ 1
[ 19.124220] initcall qs6612_init+0x0/0x39 returned 0 after 3906 usecs
[ 19.128032] calling smsc_init+0x0/0xbf @ 1
[ 19.136384] initcall smsc_init+0x0/0xbf returned 0 after 3906 usecs
[ 19.140103] calling broadcom_init+0x0/0x125 @ 1
[ 19.149636] initcall broadcom_init+0x0/0x125 returned 0 after 3906 usecs
[ 19.152059] calling realtek_init+0x0/0x39 @ 1
[ 19.156243] initcall realtek_init+0x0/0x39 returned 0 after 0 usecs
[ 19.160210] calling et1011c_init+0x0/0x39 @ 1
[ 19.164248] initcall et1011c_init+0x0/0x39 returned 0 after 0 usecs
[ 19.168053] calling fixed_mdio_bus_init+0x0/0xf6 @ 1
[ 19.172596] Fixed MDIO Bus: probed
[ 19.176088] initcall fixed_mdio_bus_init+0x0/0xf6 returned 0 after 3906 usecs
[ 19.180004] calling ns_init+0x0/0x39 @ 1
[ 19.184243] initcall ns_init+0x0/0x39 returned 0 after 0 usecs
[ 19.188076] calling ste10Xp_init+0x0/0x49 @ 1
[ 19.192541] initcall ste10Xp_init+0x0/0x49 returned 0 after 0 usecs
[ 19.196055] calling sundance_init+0x0/0x42 @ 1
[ 19.200300] initcall sundance_init+0x0/0x42 returned 0 after 0 usecs
[ 19.204083] calling hamachi_init+0x0/0x42 @ 1
[ 19.212082] initcall hamachi_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.216055] calling net_olddevs_init+0x0/0x45 @ 1
[ 19.220011] initcall net_olddevs_init+0x0/0x45 returned 0 after 0 usecs
[ 19.224006] calling hp100_module_init+0x0/0x42 @ 1
[ 19.228271] initcall hp100_module_init+0x0/0x42 returned 0 after 0 usecs
[ 19.232016] calling init_nic+0x0/0x42 @ 1
[ 19.236275] initcall init_nic+0x0/0x42 returned 0 after 0 usecs
[ 19.240049] calling ql3xxx_init_module+0x0/0x42 @ 1
[ 19.244277] initcall ql3xxx_init_module+0x0/0x42 returned 0 after 0 usecs
[ 19.248040] calling qlge_init_module+0x0/0x42 @ 1
[ 19.252282] initcall qlge_init_module+0x0/0x42 returned 0 after 0 usecs
[ 19.256047] calling ppp_init+0x0/0x104 @ 1
[ 19.260005] PPP generic driver version 2.4.2
[ 19.264798] initcall ppp_init+0x0/0x104 returned 0 after 3906 usecs
[ 19.268045] calling ppp_async_init+0x0/0x5c @ 1
[ 19.272008] initcall ppp_async_init+0x0/0x5c returned 0 after 0 usecs
[ 19.276004] calling ppp_sync_init+0x0/0x5c @ 1
[ 19.280005] initcall ppp_sync_init+0x0/0x5c returned 0 after 0 usecs
[ 19.284006] calling bsdcomp_init+0x0/0x55 @ 1
[ 19.288023] PPP BSD Compression module registered
[ 19.292007] initcall bsdcomp_init+0x0/0x55 returned 0 after 3906 usecs
[ 19.296006] calling pppox_init+0x0/0x39 @ 1
[ 19.300006] NET: Registered protocol family 24
[ 19.304005] initcall pppox_init+0x0/0x39 returned 0 after 3906 usecs
[ 19.308006] calling pppoe_init+0x0/0xaf @ 1
[ 19.312034] initcall pppoe_init+0x0/0xaf returned 0 after 0 usecs
[ 19.316005] calling pppol2tp_init+0x0/0xa8 @ 1
[ 19.320029] PPPoL2TP kernel driver, V1.0
[ 19.324005] initcall pppol2tp_init+0x0/0xa8 returned 0 after 3906 usecs
[ 19.328004] calling slip_init+0x0/0xd8 @ 1
[ 19.332006] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 19.336003] CSLIP: code copyright 1989 Regents of the University of California.
[ 19.340014] initcall slip_init+0x0/0xd8 returned 0 after 7812 usecs
[ 19.344006] calling dummy_init_module+0x0/0xd8 @ 1
[ 19.348503] initcall dummy_init_module+0x0/0xd8 returned 0 after 0 usecs
[ 19.352074] calling macvlan_init_module+0x0/0x79 @ 1
[ 19.356010] initcall macvlan_init_module+0x0/0x79 returned 0 after 0 usecs
[ 19.360005] calling dfx_init+0x0/0x47 @ 1
[ 19.364278] initcall dfx_init+0x0/0x47 returned 0 after 0 usecs
[ 19.368049] calling cp_init+0x0/0x42 @ 1
[ 19.372274] initcall cp_init+0x0/0x42 returned 0 after 0 usecs
[ 19.376054] calling rtl8139_init_module+0x0/0x42 @ 1
[ 19.384101] initcall rtl8139_init_module+0x0/0x42 returned 0 after 3906 usecs
[ 19.388033] calling eql_init_module+0x0/0x89 @ 1
[ 19.392005] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 19.396454] initcall eql_init_module+0x0/0x89 returned 0 after 3906 usecs
[ 19.400032] calling rio_init+0x0/0x42 @ 1
[ 19.404274] initcall rio_init+0x0/0x42 returned 0 after 0 usecs
[ 19.408040] calling rtl8169_init_module+0x0/0x42 @ 1
[ 19.416259] initcall rtl8169_init_module+0x0/0x42 returned 0 after 3906 usecs
[ 19.420043] calling amd8111e_init+0x0/0x42 @ 1
[ 19.424281] initcall amd8111e_init+0x0/0x42 returned 0 after 0 usecs
[ 19.428046] calling mlx4_init+0x0/0xb6 @ 1
[ 19.432340] initcall mlx4_init+0x0/0xb6 returned 0 after 0 usecs
[ 19.436045] calling mlx4_en_init+0x0/0x39 @ 1
[ 19.440028] initcall mlx4_en_init+0x0/0x39 returned 0 after 0 usecs
[ 19.444004] calling ethoc_init+0x0/0x39 @ 1
[ 19.448251] initcall ethoc_init+0x0/0x39 returned 0 after 0 usecs
[ 19.452049] calling dnet_init+0x0/0x39 @ 1
[ 19.460169] initcall dnet_init+0x0/0x39 returned 0 after 3906 usecs
[ 19.464048] calling olympic_pci_init+0x0/0x42 @ 1
[ 19.468271] initcall olympic_pci_init+0x0/0x42 returned 0 after 0 usecs
[ 19.472046] calling abyss_init+0x0/0x6d @ 1
[ 19.476280] initcall abyss_init+0x0/0x6d returned 0 after 0 usecs
[ 19.480046] calling hdlc_module_init+0x0/0x66 @ 1
[ 19.484003] HDLC support module revision 1.22
[ 19.488009] initcall hdlc_module_init+0x0/0x66 returned 0 after 3906 usecs
[ 19.492006] calling mod_init+0x0/0x3b @ 1
[ 19.496006] initcall mod_init+0x0/0x3b returned 0 after 0 usecs
[ 19.500007] calling mod_init+0x0/0x3b @ 1
[ 19.504006] initcall mod_init+0x0/0x3b returned 0 after 0 usecs
[ 19.508004] calling mod_init+0x0/0x3b @ 1
[ 19.512007] initcall mod_init+0x0/0x3b returned 0 after 0 usecs
[ 19.516004] calling fst_init+0x0/0x76 @ 1
[ 19.520273] initcall fst_init+0x0/0x76 returned 0 after 0 usecs
[ 19.524048] calling init_dlci+0x0/0x5c @ 1
[ 19.528026] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org.
[ 19.532006] initcall init_dlci+0x0/0x5c returned 0 after 3906 usecs
[ 19.536006] calling wanxl_init_module+0x0/0x42 @ 1
[ 19.540271] initcall wanxl_init_module+0x0/0x42 returned 0 after 0 usecs
[ 19.544046] calling pci200_init_module+0x0/0x69 @ 1
[ 19.548272] initcall pci200_init_module+0x0/0x69 returned 0 after 0 usecs
[ 19.552046] calling pc300_init_module+0x0/0x8c @ 1
[ 19.556278] initcall pc300_init_module+0x0/0x8c returned 0 after 0 usecs
[ 19.560048] calling init_fmvj18x_cs+0x0/0x39 @ 1
[ 19.564260] initcall init_fmvj18x_cs+0x0/0x39 returned 0 after 0 usecs
[ 19.568046] calling init_nmclan_cs+0x0/0x39 @ 1
[ 19.572249] initcall init_nmclan_cs+0x0/0x39 returned 0 after 0 usecs
[ 19.576047] calling init_pcnet_cs+0x0/0x39 @ 1
[ 19.580285] initcall init_pcnet_cs+0x0/0x39 returned 0 after 0 usecs
[ 19.584047] calling init_smc91c92_cs+0x0/0x39 @ 1
[ 19.588251] initcall init_smc91c92_cs+0x0/0x39 returned 0 after 0 usecs
[ 19.592046] calling init_xirc2ps_cs+0x0/0x39 @ 1
[ 19.596258] initcall init_xirc2ps_cs+0x0/0x39 returned 0 after 0 usecs
[ 19.600049] calling init_axnet_cs+0x0/0x39 @ 1
[ 19.604248] initcall init_axnet_cs+0x0/0x39 returned 0 after 0 usecs
[ 19.608048] calling catc_init+0x0/0x5e @ 1
[ 19.612243] usbcore: registered new interface driver catc
[ 19.616049] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[ 19.620007] initcall catc_init+0x0/0x5e returned 0 after 7812 usecs
[ 19.624004] calling kaweth_init+0x0/0x42 @ 1
[ 19.628236] usbcore: registered new interface driver kaweth
[ 19.632053] initcall kaweth_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.636005] calling pegasus_init+0x0/0x6d @ 1
[ 19.640004] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 19.644238] usbcore: registered new interface driver pegasus
[ 19.648050] initcall pegasus_init+0x0/0x6d returned 0 after 7812 usecs
[ 19.652006] calling usb_rtl8150_init+0x0/0x4e @ 1
[ 19.656004] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 19.660239] usbcore: registered new interface driver rtl8150
[ 19.664059] initcall usb_rtl8150_init+0x0/0x4e returned 0 after 7812 usecs
[ 19.668006] calling hso_init+0x0/0x1ce @ 1
[ 19.672003] hso: drivers/net/usb/hso.c: 1.2 Option Wireless
[ 19.676310] usbcore: registered new interface driver hso
[ 19.680052] initcall hso_init+0x0/0x1ce returned 0 after 7812 usecs
[ 19.684005] calling asix_init+0x0/0x42 @ 1
[ 19.688240] usbcore: registered new interface driver asix
[ 19.692054] initcall asix_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.696005] calling cdc_init+0x0/0x42 @ 1
[ 19.700240] usbcore: registered new interface driver cdc_ether
[ 19.704054] initcall cdc_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.708005] calling eem_init+0x0/0x42 @ 1
[ 19.712237] usbcore: registered new interface driver cdc_eem
[ 19.716053] initcall eem_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.720005] calling smsc95xx_init+0x0/0x42 @ 1
[ 19.724238] usbcore: registered new interface driver smsc95xx
[ 19.728052] initcall smsc95xx_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.732006] calling net1080_init+0x0/0x42 @ 1
[ 19.736252] usbcore: registered new interface driver net1080
[ 19.740052] initcall net1080_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.744005] calling plusb_init+0x0/0x42 @ 1
[ 19.748248] usbcore: registered new interface driver plusb
[ 19.752053] initcall plusb_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.756005] calling rndis_init+0x0/0x42 @ 1
[ 19.760238] usbcore: registered new interface driver rndis_host
[ 19.764052] initcall rndis_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.768005] calling zaurus_init+0x0/0x42 @ 1
[ 19.772239] usbcore: registered new interface driver zaurus
[ 19.776053] initcall zaurus_init+0x0/0x42 returned 0 after 3906 usecs
[ 19.780005] calling usbnet_init+0x0/0x52 @ 1
[ 19.784010] initcall usbnet_init+0x0/0x52 returned 0 after 0 usecs
[ 19.788006] calling strip_init_driver+0x0/0x8e @ 1
[ 19.792003] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
[ 19.796018] initcall strip_init_driver+0x0/0x8e returned 0 after 3906 usecs
[ 19.800008] calling init_wavelan_cs+0x0/0x39 @ 1
[ 19.804246] initcall init_wavelan_cs+0x0/0x39 returned 0 after 0 usecs
[ 19.808046] calling xircom_init+0x0/0x42 @ 1
[ 19.812281] initcall xircom_init+0x0/0x42 returned 0 after 0 usecs
[ 19.816046] calling dmfe_init_module+0x0/0x10f @ 1
[ 19.820003] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
[ 19.824273] initcall dmfe_init_module+0x0/0x10f returned 0 after 3906 usecs
[ 19.828047] calling w840_init+0x0/0x4e @ 1
[ 19.832003] winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
[ 19.832006] http://www.scyld.com/network/drivers.html
[ 19.836274] initcall w840_init+0x0/0x4e returned 0 after 3906 usecs
[ 19.840045] calling de_init+0x0/0x42 @ 1
[ 19.844271] initcall de_init+0x0/0x42 returned 0 after 0 usecs
[ 19.848048] calling de4x5_module_init+0x0/0x42 @ 1
[ 19.852281] initcall de4x5_module_init+0x0/0x42 returned 0 after 0 usecs
[ 19.856047] calling uli526x_init_module+0x0/0xc3 @ 1
[ 19.860005] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 19.864271] initcall uli526x_init_module+0x0/0xc3 returned 0 after 3906 usecs
[ 19.868047] calling yam_init_driver+0x0/0x153 @ 1
[ 19.872005] YAM driver version 0.8 by F1OAT/F6FBB
[ 19.877867] initcall yam_init_driver+0x0/0x153 returned 0 after 3906 usecs
[ 19.880046] calling bpq_init_driver+0x0/0x8c @ 1
[ 19.884065] AX.25: bpqether driver version 004
[ 19.888005] initcall bpq_init_driver+0x0/0x8c returned 0 after 3906 usecs
[ 19.892007] calling init_baycomserfdx+0x0/0x120 @ 1
[ 19.896005] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 19.896007] baycom_ser_fdx: version 0.10 compiled 13:34:02 Jun 11 2009
[ 19.905096] initcall init_baycomserfdx+0x0/0x120 returned 0 after 7812 usecs
[ 19.908076] calling hdlcdrv_init_driver+0x0/0x49 @ 1
[ 19.912003] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[ 19.916004] hdlcdrv: version 0.8 compiled 13:34:03 Jun 11 2009
[ 19.920006] initcall hdlcdrv_init_driver+0x0/0x49 returned 0 after 7812 usecs
[ 19.924006] calling init_netconsole+0x0/0x13f @ 1
[ 19.928006] console [netcon0] enabled
[ 19.932009] netconsole: network logging started
[ 19.936005] initcall init_netconsole+0x0/0x13f returned 0 after 7812 usecs
[ 19.940006] calling init+0x0/0x39 @ 1
[ 19.944247] initcall init+0x0/0x39 returned 0 after 0 usecs
[ 19.948099] calling efx_init_module+0x0/0xfd @ 1
[ 19.952003] Solarflare NET driver v2.3
[ 19.956420] initcall efx_init_module+0x0/0xfd returned 0 after 3906 usecs
[ 19.960053] calling i2400m_driver_init+0x0/0x2d @ 1
[ 19.964007] initcall i2400m_driver_init+0x0/0x2d returned 0 after 0 usecs
[ 19.968006] calling i2400ms_driver_init+0x0/0x39 @ 1
[ 19.976228] initcall i2400ms_driver_init+0x0/0x39 returned 0 after 3906 usecs
[ 19.980059] calling i2o_iop_init+0x0/0x6c @ 1
[ 19.984003] I2O subsystem v1.325
[ 19.987340] i2o: max drivers = 8
[ 19.988849] initcall i2o_iop_init+0x0/0x6c returned 0 after 3906 usecs
[ 19.992048] calling i2o_bus_init+0x0/0x68 @ 1
[ 19.996004] I2O Bus Adapter OSM v1.317
[ 20.000245] initcall i2o_bus_init+0x0/0x68 returned 0 after 3906 usecs
[ 20.004105] calling i2o_block_init+0x0/0x146 @ 1
[ 20.008003] I2O Block Device OSM v1.325
[ 20.013479] initcall i2o_block_init+0x0/0x146 returned 0 after 3906 usecs
[ 20.016045] calling i2o_scsi_init+0x0/0x68 @ 1
[ 20.020005] I2O SCSI Peripheral OSM v1.316
[ 20.024244] initcall i2o_scsi_init+0x0/0x68 returned 0 after 3906 usecs
[ 20.028091] calling fusion_init+0x0/0x164 @ 1
[ 20.032004] Fusion MPT base driver 3.04.07
[ 20.036004] Copyright (c) 1999-2008 LSI Corporation
[ 20.040044] initcall fusion_init+0x0/0x164 returned 0 after 7812 usecs
[ 20.044006] calling mptspi_init+0x0/0x102 @ 1
[ 20.048003] Fusion MPT SPI Host driver 3.04.07
[ 20.052298] initcall mptspi_init+0x0/0x102 returned 0 after 3906 usecs
[ 20.056044] calling mptctl_init+0x0/0x129 @ 1
[ 20.060005] Fusion MPT misc device (ioctl) driver 3.04.07
[ 20.064498] mptctl: Registered with Fusion MPT base driver
[ 20.068056] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 20.072006] initcall mptctl_init+0x0/0x129 returned 0 after 11718 usecs
[ 20.076007] calling pcilynx_init+0x0/0x62 @ 1
[ 20.080277] initcall pcilynx_init+0x0/0x62 returned 0 after 0 usecs
[ 20.084047] calling sbp2_module_init+0x0/0x9e @ 1
[ 20.088264] initcall sbp2_module_init+0x0/0x9e returned 0 after 0 usecs
[ 20.092049] calling ether1394_init_module+0x0/0x96 @ 1
[ 20.096618] initcall ether1394_init_module+0x0/0x96 returned 0 after 0 usecs
[ 20.100051] calling uio_init+0x0/0x2d @ 1
[ 20.104005] initcall uio_init+0x0/0x2d returned 0 after 0 usecs
[ 20.108006] calling hilscher_init_module+0x0/0x42 @ 1
[ 20.112278] initcall hilscher_init_module+0x0/0x42 returned 0 after 0 usecs
[ 20.116073] calling uio_pdrv_genirq_init+0x0/0x39 @ 1
[ 20.120252] initcall uio_pdrv_genirq_init+0x0/0x39 returned 0 after 0 usecs
[ 20.124048] calling aectc_init+0x0/0x42 @ 1
[ 20.132149] initcall aectc_init+0x0/0x42 returned 0 after 3906 usecs
[ 20.136021] calling sercos3_init_module+0x0/0x42 @ 1
[ 20.144118] initcall sercos3_init_module+0x0/0x42 returned 0 after 3906 usecs
[ 20.148021] calling cdrom_init+0x0/0x2d @ 1
[ 20.152005] initcall cdrom_init+0x0/0x2d returned 0 after 0 usecs
[ 20.156006] calling nonstatic_sysfs_init+0x0/0x39 @ 1
[ 20.160009] initcall nonstatic_sysfs_init+0x0/0x39 returned 0 after 0 usecs
[ 20.164007] calling pd6729_module_init+0x0/0x47 @ 1
[ 20.168273] initcall pd6729_module_init+0x0/0x47 returned 0 after 0 usecs
[ 20.172039] calling uwb_subsys_init+0x0/0x77 @ 1
[ 20.176339] initcall uwb_subsys_init+0x0/0x77 returned 0 after 0 usecs
[ 20.180040] calling gpio_vbus_init+0x0/0x40 @ 1
[ 20.184495] initcall gpio_vbus_init+0x0/0x40 returned -19 after 0 usecs
[ 20.188044] calling mon_init+0x0/0x141 @ 1
[ 20.192678] initcall mon_init+0x0/0x141 returned 0 after 0 usecs
[ 20.196076] calling ehci_hcd_init+0x0/0x107 @ 1
[ 20.200006] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 20.204006] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[ 20.208098] IOAPIC[0]: Set routing entry (2-21 -> 0x69 -> IRQ 21 Mode:1 Active:1)
[ 20.212012] ehci_hcd 0000:00:10.4: PCI->APIC IRQ transform: INT C -> IRQ 21
[ 20.216008] ehci_hcd 0000:00:10.4: calling quirk_via_vlink+0x0/0xf8
[ 20.220035] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 20.225396] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 20.228089] ehci_hcd 0000:00:10.4: reset hcs_params 0x4208 dbg=0 cc=4 pcc=2 ordered !ppc ports=8
[ 20.232007] ehci_hcd 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024
[ 20.236182] ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 20.240008] ehci_hcd 0000:00:10.4: Enabling legacy PCI PM
[ 20.244016] ehci_hcd 0000:00:10.4: MWI active
[ 20.248058] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000
[ 20.252009] ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 20.256008] ehci_hcd 0000:00:10.4: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 20.272028] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 20.276230] usb usb1: default language 0x0409
[ 20.280064] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.284006] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.288004] usb usb1: Product: EHCI Host Controller
[ 20.292008] usb usb1: Manufacturer: Linux 2.6.30-tip-02161-g7a74539-dirty ehci_hcd
[ 20.296004] usb usb1: SerialNumber: 0000:00:10.4
[ 20.300326] usb usb1: uevent
[ 20.304241] usb usb1: usb_probe_device
[ 20.308012] usb usb1: configuration #1 chosen from 1 choice
[ 20.312102] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 20.316102] usb 1-0:1.0: uevent
[ 20.320287] hub 1-0:1.0: usb_probe_interface
[ 20.324038] hub 1-0:1.0: usb_probe_interface - got id
[ 20.328005] hub 1-0:1.0: USB hub found
[ 20.332163] hub 1-0:1.0: 8 ports detected
[ 20.336004] hub 1-0:1.0: standalone hub
[ 20.340007] hub 1-0:1.0: no power switching (usb 1.0)
[ 20.344004] hub 1-0:1.0: individual port over-current protection
[ 20.348006] hub 1-0:1.0: power on to power good time: 20ms
[ 20.352177] hub 1-0:1.0: local power source is good
[ 20.356009] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 20.365720] initcall ehci_hcd_init+0x0/0x107 returned 0 after 160156 usecs
[ 20.368038] calling oxu_module_init+0x0/0x39 @ 1
[ 20.372274] initcall oxu_module_init+0x0/0x39 returned 0 after 0 usecs
[ 20.376126] calling isp116x_init+0x0/0x67 @ 1
[ 20.380005] 116x: driver isp116x-hcd, 03 Nov 2005
[ 20.384254] initcall isp116x_init+0x0/0x67 returned 0 after 3906 usecs
[ 20.388046] calling ohci_hcd_mod_init+0x0/0xfa @ 1
[ 20.392003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 20.396005] ohci_hcd: block sizes: ed 80 td 96
[ 20.400555] initcall ohci_hcd_mod_init+0x0/0xfa returned 0 after 7812 usecs
[ 20.404066] calling uhci_hcd_init+0x0/0x169 @ 1
[ 20.408003] uhci_hcd: USB Universal Host Controller Interface driver
[ 20.416150] uhci_hcd 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 20.420052] uhci_hcd 0000:00:10.0: calling quirk_via_vlink+0x0/0xf8
[ 20.424020] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 20.428773] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 20.432035] uhci_hcd 0000:00:10.0: detected 2 ports
[ 20.436009] uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 20.440003] uhci_hcd 0000:00:10.0: Performing full reset
[ 20.444053] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
[ 20.448330] usb usb2: default language 0x0409
[ 20.452063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.456004] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.460081] usb usb2: Product: UHCI Host Controller
[ 20.464004] usb usb2: Manufacturer: Linux 2.6.30-tip-02161-g7a74539-dirty uhci_hcd
[ 20.468005] usb usb2: SerialNumber: 0000:00:10.0
[ 20.472253] usb usb2: uevent
[ 20.476422] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
[ 20.480124] usb usb2: usb_probe_device
[ 20.484041] usb usb2: configuration #1 chosen from 1 choice
[ 20.488036] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 20.492103] usb 2-0:1.0: uevent
[ 20.495562] hub 2-0:1.0: usb_probe_interface
[ 20.496022] hub 2-0:1.0: usb_probe_interface - got id
[ 20.500007] hub 2-0:1.0: USB hub found
[ 20.504139] hub 2-0:1.0: 2 ports detected
[ 20.508007] hub 2-0:1.0: standalone hub
[ 20.512003] hub 2-0:1.0: no power switching (usb 1.0)
[ 20.516005] hub 2-0:1.0: individual port over-current protection
[ 20.520006] hub 2-0:1.0: power on to power good time: 2ms
[ 20.524065] hub 2-0:1.0: local power source is good
[ 20.528006] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 20.532923] uhci_hcd 0000:00:10.1: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 20.536049] uhci_hcd 0000:00:10.1: calling quirk_via_vlink+0x0/0xf8
[ 20.540020] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 20.544683] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 20.548119] uhci_hcd 0000:00:10.1: detected 2 ports
[ 20.552007] uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 20.556006] uhci_hcd 0000:00:10.1: Performing full reset
[ 20.560051] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
[ 20.564245] usb usb3: default language 0x0409
[ 20.568060] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.572008] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.576004] usb usb3: Product: UHCI Host Controller
[ 20.580007] usb usb3: Manufacturer: Linux 2.6.30-tip-02161-g7a74539-dirty uhci_hcd
[ 20.584004] usb usb3: SerialNumber: 0000:00:10.1
[ 20.588244] usb usb3: uevent
[ 20.591480] usb usb3: usb_probe_device
[ 20.592078] usb usb3: configuration #1 chosen from 1 choice
[ 20.596033] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 20.600094] usb 3-0:1.0: uevent
[ 20.604230] hub 3-0:1.0: usb_probe_interface
[ 20.608051] hub 3-0:1.0: usb_probe_interface - got id
[ 20.612006] hub 3-0:1.0: USB hub found
[ 20.616093] hub 3-0:1.0: 2 ports detected
[ 20.620005] hub 3-0:1.0: standalone hub
[ 20.624003] hub 3-0:1.0: no power switching (usb 1.0)
[ 20.628006] hub 3-0:1.0: individual port over-current protection
[ 20.632009] hub 3-0:1.0: power on to power good time: 2ms
[ 20.636031] hub 3-0:1.0: local power source is good
[ 20.640008] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 20.644410] uhci_hcd 0000:00:10.0: port 1 portsc 008a,00
[ 20.648121] uhci_hcd 0000:00:10.0: port 2 portsc 008a,00
[ 20.652518] uhci_hcd 0000:00:10.2: PCI->APIC IRQ transform: INT B -> IRQ 21
[ 20.656050] uhci_hcd 0000:00:10.2: calling quirk_via_vlink+0x0/0xf8
[ 20.660019] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 20.668520] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 20.672032] uhci_hcd 0000:00:10.2: detected 2 ports
[ 20.676009] uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 20.680003] uhci_hcd 0000:00:10.2: Performing full reset
[ 20.684051] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
[ 20.688291] usb usb4: default language 0x0409
[ 20.692070] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.696004] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.700009] usb usb4: Product: UHCI Host Controller
[ 20.704004] usb usb4: Manufacturer: Linux 2.6.30-tip-02161-g7a74539-dirty uhci_hcd
[ 20.708005] usb usb4: SerialNumber: 0000:00:10.2
[ 20.716124] usb usb4: uevent
[ 20.719344] usb usb4: usb_probe_device
[ 20.720070] usb usb4: configuration #1 chosen from 1 choice
[ 20.724037] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 20.728091] usb 4-0:1.0: uevent
[ 20.732228] hub 4-0:1.0: usb_probe_interface
[ 20.736210] hub 4-0:1.0: usb_probe_interface - got id
[ 20.740005] hub 4-0:1.0: USB hub found
[ 20.744095] hub 4-0:1.0: 2 ports detected
[ 20.748007] hub 4-0:1.0: standalone hub
[ 20.752007] hub 4-0:1.0: no power switching (usb 1.0)
[ 20.756005] hub 4-0:1.0: individual port over-current protection
[ 20.760006] hub 4-0:1.0: power on to power good time: 2ms
[ 20.764036] hub 4-0:1.0: local power source is good
[ 20.768006] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 20.772262] uhci_hcd 0000:00:10.1: port 1 portsc 018a,00
[ 20.776093] uhci_hcd 0000:00:10.1: port 2 portsc 018a,00
[ 20.780070] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 20.784623] uhci_hcd 0000:00:10.3: PCI->APIC IRQ transform: INT B -> IRQ 21
[ 20.788021] uhci_hcd 0000:00:10.3: calling quirk_via_vlink+0x0/0xf8
[ 20.796012] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 20.800679] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 20.804078] uhci_hcd 0000:00:10.3: detected 2 ports
[ 20.808008] uhci_hcd 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 20.812006] uhci_hcd 0000:00:10.3: Performing full reset
[ 20.816051] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
[ 20.820291] usb usb5: default language 0x0409
[ 20.824057] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.828006] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.832005] usb usb5: Product: UHCI Host Controller
[ 20.836005] usb usb5: Manufacturer: Linux 2.6.30-tip-02161-g7a74539-dirty uhci_hcd
[ 20.840004] usb usb5: SerialNumber: 0000:00:10.3
[ 20.844251] usb usb5: uevent
[ 20.848227] usb usb5: usb_probe_device
[ 20.852070] usb usb5: configuration #1 chosen from 1 choice
[ 20.856032] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 20.860100] usb 5-0:1.0: uevent
[ 20.863570] hub 5-0:1.0: usb_probe_interface
[ 20.864048] hub 5-0:1.0: usb_probe_interface - got id
[ 20.868006] hub 5-0:1.0: USB hub found
[ 20.872098] hub 5-0:1.0: 2 ports detected
[ 20.876006] hub 5-0:1.0: standalone hub
[ 20.880008] hub 5-0:1.0: no power switching (usb 1.0)
[ 20.884005] hub 5-0:1.0: individual port over-current protection
[ 20.888004] hub 5-0:1.0: power on to power good time: 2ms
[ 20.892033] hub 5-0:1.0: local power source is good
[ 20.896006] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 20.900269] uhci_hcd 0000:00:10.2: port 1 portsc 018a,00
[ 20.904093] uhci_hcd 0000:00:10.2: port 2 portsc 018a,00
[ 20.908053] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 20.916122] initcall uhci_hcd_init+0x0/0x169 returned 0 after 496093 usecs
[ 20.920065] calling sl811h_init+0x0/0x67 @ 1
[ 20.924005] sl811: driver sl811-hcd, 19 May 2005
[ 20.928258] initcall sl811h_init+0x0/0x67 returned 0 after 3906 usecs
[ 20.932036] calling init_sl811_cs+0x0/0x39 @ 1
[ 20.940174] initcall init_sl811_cs+0x0/0x39 returned 0 after 3906 usecs
[ 20.944012] calling r8a66597_init+0x0/0x67 @ 1
[ 20.948005] r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
[ 20.952263] initcall r8a66597_init+0x0/0x67 returned 0 after 3906 usecs
[ 20.956046] calling isp1760_init+0x0/0x76 @ 1
[ 20.961283] initcall isp1760_init+0x0/0x76 returned 0 after 0 usecs
[ 20.964040] calling c67x00_init+0x0/0x39 @ 1
[ 20.968265] initcall c67x00_init+0x0/0x39 returned 0 after 0 usecs
[ 20.972125] calling wusbcore_init+0x0/0x99 @ 1
[ 20.976081] initcall wusbcore_init+0x0/0x99 returned 0 after 0 usecs
[ 20.980044] calling cbaf_driver_init+0x0/0x42 @ 1
[ 20.988035] usbcore: registered new interface driver wusb-cbaf
[ 20.992011] initcall cbaf_driver_init+0x0/0x42 returned 0 after 7812 usecs
[ 20.996006] calling acm_init+0x0/0x128 @ 1
[ 21.000123] uhci_hcd 0000:00:10.3: port 1 portsc 008a,00
[ 21.004090] uhci_hcd 0000:00:10.3: port 2 portsc 008a,00
[ 21.008059] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 21.012188] usbcore: registered new interface driver cdc_acm
[ 21.016018] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 21.020007] initcall acm_init+0x0/0x128 returned 0 after 19531 usecs
[ 21.024006] calling usblp_init+0x0/0x42 @ 1
[ 21.028252] usbcore: registered new interface driver usblp
[ 21.032040] initcall usblp_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.036008] calling wdm_init+0x0/0x42 @ 1
[ 21.040251] usbcore: registered new interface driver cdc_wdm
[ 21.044043] initcall wdm_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.048007] calling usbtmc_init+0x0/0x5e @ 1
[ 21.052255] usbcore: registered new interface driver usbtmc
[ 21.056045] initcall usbtmc_init+0x0/0x5e returned 0 after 3906 usecs
[ 21.060008] calling usb_stor_init+0x0/0x74 @ 1
[ 21.064003] Initializing USB Mass Storage driver...
[ 21.068290] usbcore: registered new interface driver usb-storage
[ 21.072044] USB Mass Storage support registered.
[ 21.076008] initcall usb_stor_init+0x0/0x74 returned 0 after 11718 usecs
[ 21.080005] calling usb_usual_init+0x0/0x66 @ 1
[ 21.084480] usbcore: registered new interface driver libusual
[ 21.088052] initcall usb_usual_init+0x0/0x66 returned 0 after 3906 usecs
[ 21.092008] calling cypress_init+0x0/0x42 @ 1
[ 21.096259] usbcore: registered new interface driver ums-cypress
[ 21.100052] initcall cypress_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.104005] calling datafab_init+0x0/0x42 @ 1
[ 21.108108] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 21.112214] usbcore: registered new interface driver ums-datafab
[ 21.116022] initcall datafab_init+0x0/0x42 returned 0 after 7812 usecs
[ 21.120006] calling jumpshot_init+0x0/0x42 @ 1
[ 21.124252] usbcore: registered new interface driver ums-jumpshot
[ 21.128048] initcall jumpshot_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.132009] calling karma_init+0x0/0x42 @ 1
[ 21.136255] usbcore: registered new interface driver ums-karma
[ 21.140042] initcall karma_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.144006] calling onetouch_init+0x0/0x42 @ 1
[ 21.148253] usbcore: registered new interface driver ums-onetouch
[ 21.152049] initcall onetouch_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.156008] calling sddr09_init+0x0/0x42 @ 1
[ 21.160249] usbcore: registered new interface driver ums-sddr09
[ 21.164047] initcall sddr09_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.168006] calling usbat_init+0x0/0x42 @ 1
[ 21.172253] usbcore: registered new interface driver ums-usbat
[ 21.176048] initcall usbat_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.180007] calling microtek_drv_init+0x0/0x42 @ 1
[ 21.184249] usbcore: registered new interface driver microtekX6
[ 21.188048] initcall microtek_drv_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.192006] calling usb_serial_init+0x0/0x25d @ 1
[ 21.196558] usbcore: registered new interface driver usbserial
[ 21.200288] USB Serial support registered for generic
[ 21.204324] usbcore: registered new interface driver usbserial_generic
[ 21.208040] usbserial: USB Serial Driver core
[ 21.212008] initcall usb_serial_init+0x0/0x25d returned 0 after 15625 usecs
[ 21.216005] calling aircable_init+0x0/0x6e @ 1
[ 21.220246] USB Serial support registered for aircable
[ 21.224291] usbcore: registered new interface driver aircable
[ 21.228045] initcall aircable_init+0x0/0x6e returned 0 after 7812 usecs
[ 21.232027] calling belkin_sa_init+0x0/0x7e @ 1
[ 21.236264] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 21.240288] usbcore: registered new interface driver belkin
[ 21.244041] belkin_sa: v1.2:USB Belkin Serial converter driver
[ 21.248005] initcall belkin_sa_init+0x0/0x7e returned 0 after 11718 usecs
[ 21.252008] calling ch341_init+0x0/0x6e @ 1
[ 21.256244] USB Serial support registered for ch341-uart
[ 21.260289] usbcore: registered new interface driver ch341
[ 21.264043] initcall ch341_init+0x0/0x6e returned 0 after 7812 usecs
[ 21.268006] calling cyberjack_init+0x0/0x8c @ 1
[ 21.272247] USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 21.276288] usbcore: registered new interface driver cyberjack
[ 21.280040] cyberjack: v1.01 Matthias Bruestle
[ 21.284004] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[ 21.288006] initcall cyberjack_init+0x0/0x8c returned 0 after 15625 usecs
[ 21.292007] calling cypress_init+0x0/0xdd @ 1
[ 21.296251] USB Serial support registered for DeLorme Earthmate USB
[ 21.300285] USB Serial support registered for HID->COM RS232 Adapter
[ 21.304294] USB Serial support registered for Nokia CA-42 V2 Adapter
[ 21.312187] usbcore: registered new interface driver cypress
[ 21.316014] cypress_m8: v1.09:Cypress USB to Serial Driver
[ 21.320005] initcall cypress_init+0x0/0xdd returned 0 after 23437 usecs
[ 21.324007] calling digi_init+0x0/0x9c @ 1
[ 21.328248] USB Serial support registered for Digi 2 port USB adapter
[ 21.332292] USB Serial support registered for Digi 4 port USB adapter
[ 21.336286] usbcore: registered new interface driver digi_acceleport
[ 21.340041] digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
[ 21.344005] initcall digi_init+0x0/0x9c returned 0 after 15625 usecs
[ 21.348007] calling edgeport_init+0x0/0xe6 @ 1
[ 21.352246] USB Serial support registered for Edgeport 2 port adapter
[ 21.356282] USB Serial support registered for Edgeport 4 port adapter
[ 21.360291] USB Serial support registered for Edgeport 8 port adapter
[ 21.364296] USB Serial support registered for EPiC device
[ 21.368292] usbcore: registered new interface driver io_edgeport
[ 21.372044] io_edgeport: v2.7:Edgeport USB Serial Driver
[ 21.376005] initcall edgeport_init+0x0/0xe6 returned 0 after 23437 usecs
[ 21.380005] calling edgeport_init+0x0/0x9c @ 1
[ 21.384249] USB Serial support registered for Edgeport TI 1 port adapter
[ 21.388285] USB Serial support registered for Edgeport TI 2 port adapter
[ 21.392294] usbcore: registered new interface driver io_ti
[ 21.396042] io_ti: v0.7mode043006:Edgeport USB Serial Driver
[ 21.400007] initcall edgeport_init+0x0/0x9c returned 0 after 15625 usecs
[ 21.404005] calling ftdi_init+0x0/0xf0 @ 1
[ 21.408248] USB Serial support registered for FTDI USB Serial Device
[ 21.416293] usbcore: registered new interface driver ftdi_sio
[ 21.420044] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[ 21.424005] initcall ftdi_init+0x0/0xf0 returned 0 after 15625 usecs
[ 21.428005] calling funsoft_init+0x0/0x6e @ 1
[ 21.432248] USB Serial support registered for funsoft
[ 21.436291] usbcore: registered new interface driver funsoft
[ 21.440044] initcall funsoft_init+0x0/0x6e returned 0 after 7812 usecs
[ 21.444007] calling garmin_init+0x0/0x7e @ 1
[ 21.448244] USB Serial support registered for Garmin GPS usb/tty
[ 21.452291] usbcore: registered new interface driver garmin_gps
[ 21.456041] garmin_gps: v0.31:garmin gps driver
[ 21.460006] initcall garmin_init+0x0/0x7e returned 0 after 11718 usecs
[ 21.464004] calling hp49gp_init+0x0/0x7e @ 1
[ 21.468249] USB Serial support registered for hp4X
[ 21.472296] usbcore: registered new interface driver hp4X
[ 21.476042] hp4x: v1.00:HP4x (48/49) Generic Serial driver
[ 21.480029] initcall hp49gp_init+0x0/0x7e returned 0 after 11718 usecs
[ 21.484005] calling ipaq_init+0x0/0xb9 @ 1
[ 21.488248] USB Serial support registered for PocketPC PDA
[ 21.496065] usbcore: registered new interface driver ipaq
[ 21.500030] ipaq: v0.5:USB PocketPC PDA driver
[ 21.504006] initcall ipaq_init+0x0/0xb9 returned 0 after 15625 usecs
[ 21.508005] calling ir_init+0x0/0x7e @ 1
[ 21.512244] USB Serial support registered for IR Dongle
[ 21.516279] usbcore: registered new interface driver ir-usb
[ 21.520035] ir_usb: v0.4:USB IR Dongle driver
[ 21.524006] initcall ir_init+0x0/0x7e returned 0 after 11718 usecs
[ 21.528005] calling iuu_init+0x0/0x7e @ 1
[ 21.532247] USB Serial support registered for iuu_phoenix
[ 21.536292] usbcore: registered new interface driver iuu_phoenix
[ 21.540040] iuu_phoenix: v0.5:Infinity USB Unlimited Phoenix driver
[ 21.544005] initcall iuu_init+0x0/0x7e returned 0 after 11718 usecs
[ 21.548005] calling keyspan_init+0x0/0xdc @ 1
[ 21.552247] USB Serial support registered for Keyspan - (without firmware)
[ 21.556288] USB Serial support registered for Keyspan 1 port adapter
[ 21.560280] USB Serial support registered for Keyspan 2 port adapter
[ 21.564284] USB Serial support registered for Keyspan 4 port adapter
[ 21.568296] usbcore: registered new interface driver keyspan
[ 21.572043] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
[ 21.576006] initcall keyspan_init+0x0/0xdc returned 0 after 23437 usecs
[ 21.580005] calling klsi_105_init+0x0/0x7e @ 1
[ 21.584249] USB Serial support registered for KL5KUSB105D / PalmConnect
[ 21.588290] usbcore: registered new interface driver kl5kusb105d
[ 21.592040] kl5kusb105: v0.3a:KLSI KL5KUSB105 chipset USB->Serial Converter driver
[ 21.596006] initcall klsi_105_init+0x0/0x7e returned 0 after 11718 usecs
[ 21.600007] calling kobil_init+0x0/0x7e @ 1
[ 21.604248] USB Serial support registered for KOBIL USB smart card terminal
[ 21.612124] usbcore: registered new interface driver kobil
[ 21.616015] kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
[ 21.620006] initcall kobil_init+0x0/0x7e returned 0 after 15625 usecs
[ 21.624005] calling mct_u232_init+0x0/0x7e @ 1
[ 21.628248] USB Serial support registered for MCT U232
[ 21.632296] usbcore: registered new interface driver mct_u232
[ 21.636038] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
[ 21.640005] initcall mct_u232_init+0x0/0x7e returned 0 after 11718 usecs
[ 21.644005] calling moschip7720_init+0x0/0x9f @ 1
[ 21.652041] USB Serial support registered for Moschip 2 port adapter
[ 21.656003] mos7720: 1.0.0.4F:Moschip USB Serial Driver
[ 21.664168] usbcore: registered new interface driver moschip7720
[ 21.668017] initcall moschip7720_init+0x0/0x9f returned 0 after 19531 usecs
[ 21.672005] calling moschip7840_init+0x0/0xef @ 1
[ 21.676253] USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 21.680040] mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
[ 21.684254] usbcore: registered new interface driver mos7840
[ 21.688036] initcall moschip7840_init+0x0/0xef returned 0 after 11718 usecs
[ 21.692007] calling omninet_init+0x0/0x7e @ 1
[ 21.696248] USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 21.700299] usbcore: registered new interface driver omninet
[ 21.704037] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[ 21.708008] initcall omninet_init+0x0/0x7e returned 0 after 11718 usecs
[ 21.712004] calling opticon_init+0x0/0x6e @ 1
[ 21.716254] USB Serial support registered for opticon
[ 21.720291] usbcore: registered new interface driver opticon
[ 21.724044] initcall opticon_init+0x0/0x6e returned 0 after 7812 usecs
[ 21.728027] calling pl2303_init+0x0/0x7e @ 1
[ 21.732254] USB Serial support registered for pl2303
[ 21.736292] usbcore: registered new interface driver pl2303
[ 21.740042] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 21.744006] initcall pl2303_init+0x0/0x7e returned 0 after 11718 usecs
[ 21.748005] calling qcinit+0x0/0x6e @ 1
[ 21.752256] USB Serial support registered for Qualcomm USB modem
[ 21.756294] usbcore: registered new interface driver qcserial
[ 21.760047] initcall qcinit+0x0/0x6e returned 0 after 7812 usecs
[ 21.764006] calling siemens_usb_mpi_init+0x0/0x8c @ 1
[ 21.768249] USB Serial support registered for siemens_mpi
[ 21.772293] usbcore: registered new interface driver siemens_mpi
[ 21.776045] Driver for Siemens USB/MPI adapter
[ 21.780006] Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
[ 21.784005] initcall siemens_usb_mpi_init+0x0/0x8c returned 0 after 15625 usecs
[ 21.788005] calling visor_init+0x0/0x1c6 @ 1
[ 21.792258] USB Serial support registered for Handspring Visor / Palm OS
[ 21.796285] USB Serial support registered for Sony Clie 3.5
[ 21.800293] USB Serial support registered for Sony Clie 5.0
[ 21.804294] usbcore: registered new interface driver visor
[ 21.808040] visor: USB HandSpring Visor / Palm OS driver
[ 21.812008] initcall visor_init+0x0/0x1c6 returned 0 after 19531 usecs
[ 21.816005] calling whiteheat_init+0x0/0x9c @ 1
[ 21.820252] USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 21.824285] USB Serial support registered for Connect Tech - WhiteHEAT
[ 21.828291] usbcore: registered new interface driver whiteheat
[ 21.832040] whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
[ 21.836006] initcall whiteheat_init+0x0/0x9c returned 0 after 15625 usecs
[ 21.840006] calling keyspan_pda_init+0x0/0x9c @ 1
[ 21.844256] USB Serial support registered for Keyspan PDA
[ 21.848287] USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[ 21.852290] usbcore: registered new interface driver keyspan_pda
[ 21.856040] keyspan_pda: v1.1:USB Keyspan PDA Converter driver
[ 21.860007] initcall keyspan_pda_init+0x0/0x9c returned 0 after 15625 usecs
[ 21.864005] calling adu_init+0x0/0xba @ 1
[ 21.868004] drivers/usb/misc/adutux.c : adu_init : enter
[ 21.872295] usbcore: registered new interface driver adutux
[ 21.876050] adutux adutux (see www.ontrak.net) v0.0.13
[ 21.880003] adutux is an experimental driver. Use at your own risk
[ 21.884005] drivers/usb/misc/adutux.c : adu_init : leave, return value 0
[ 21.888006] initcall adu_init+0x0/0xba returned 0 after 19531 usecs
[ 21.892007] calling appledisplay_init+0x0/0x80 @ 1
[ 21.896335] usbcore: registered new interface driver appledisplay
[ 21.900055] initcall appledisplay_init+0x0/0x80 returned 0 after 3906 usecs
[ 21.904004] calling berry_init+0x0/0x42 @ 1
[ 21.908261] usbcore: registered new interface driver berry_charge
[ 21.912052] initcall berry_init+0x0/0x42 returned 0 after 3906 usecs
[ 21.916006] calling emi26_init+0x0/0x42 @ 1
[ 21.924067] usbcore: registered new interface driver emi26 - firmware loader
[ 21.928045] initcall emi26_init+0x0/0x42 returned 0 after 7812 usecs
[ 21.932007] calling emi62_init+0x0/0x5e @ 1
[ 21.936258] usbcore: registered new interface driver emi62 - firmware loader
[ 21.940021] initcall emi62_init+0x0/0x5e returned 0 after 3906 usecs
[ 21.944004] calling ftdi_elan_init+0x0/0x192 @ 1
[ 21.948006] driver ftdi-elan built at 13:34:07 on Jun 11 2009
[ 21.952495] usbcore: registered new interface driver ftdi-elan
[ 21.956051] initcall ftdi_elan_init+0x0/0x192 returned 0 after 7812 usecs
[ 21.960006] calling usb_idmouse_init+0x0/0x6c @ 1
[ 21.964004] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
[ 21.968250] usbcore: registered new interface driver idmouse
[ 21.972045] initcall usb_idmouse_init+0x0/0x6c returned 0 after 7812 usecs
[ 21.976008] usb usb2: suspend_rh (auto-stop)
[ 21.980007] usb usb3: suspend_rh (auto-stop)
[ 21.984007] usb usb4: suspend_rh (auto-stop)
[ 21.988014] calling iowarrior_init+0x0/0x42 @ 1
[ 21.992251] usbcore: registered new interface driver iowarrior
[ 21.996052] initcall iowarrior_init+0x0/0x42 returned 0 after 3906 usecs
[ 22.000008] calling usb_lcd_init+0x0/0x60 @ 1
[ 22.004257] usbcore: registered new interface driver usblcd
[ 22.008048] initcall usb_lcd_init+0x0/0x60 returned 0 after 3906 usecs
[ 22.012009] calling lego_usb_tower_init+0x0/0xaf @ 1
[ 22.016003] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter
[ 22.020252] usbcore: registered new interface driver legousbtower
[ 22.024051] legousbtower: v0.96:LEGO USB Tower Driver
[ 22.028005] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0
[ 22.032005] initcall lego_usb_tower_init+0x0/0xaf returned 0 after 15625 usecs
[ 22.036007] calling tv_init+0x0/0x70 @ 1
[ 22.040251] usbcore: registered new interface driver trancevibrator
[ 22.044050] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
[ 22.048006] initcall tv_init+0x0/0x70 returned 0 after 7812 usecs
[ 22.052007] calling usb_sevseg_init+0x0/0x60 @ 1
[ 22.056249] usbcore: registered new interface driver usbsevseg
[ 22.060054] initcall usb_sevseg_init+0x0/0x60 returned 0 after 3906 usecs
[ 22.064004] calling usb_sisusb_init+0x0/0x47 @ 1
[ 22.072200] usbcore: registered new interface driver sisusb
[ 22.076054] initcall usb_sisusb_init+0x0/0x47 returned 0 after 7812 usecs
[ 22.080004] calling cxacru_init+0x0/0x42 @ 1
[ 22.084262] usbcore: registered new interface driver cxacru
[ 22.088051] initcall cxacru_init+0x0/0x42 returned 0 after 3906 usecs
[ 22.092007] calling uea_init+0x0/0x50 @ 1
[ 22.096004] [ueagle-atm] driver ueagle 1.4 loaded
[ 22.100257] usbcore: registered new interface driver ueagle-atm
[ 22.104052] initcall uea_init+0x0/0x50 returned 0 after 7812 usecs
[ 22.108007] calling usbatm_usb_init+0x0/0x8a @ 1
[ 22.112003] drivers/usb/atm/usbatm.c: usbatm_usb_init: driver version 1.10
[ 22.116006] initcall usbatm_usb_init+0x0/0x8a returned 0 after 3906 usecs
[ 22.120005] calling xusbatm_init+0x0/0x154 @ 1
[ 22.124004] drivers/usb/atm/xusbatm.c: xusbatm_init
[ 22.128003] xusbatm: malformed module parameters
[ 22.132008] initcall xusbatm_init+0x0/0x154 returned -22 after 7812 usecs
[ 22.136004] initcall xusbatm_init+0x0/0x154 returned with error code -22
[ 22.140005] calling i8042_init+0x0/0x143 @ 1
[ 22.145053] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.148083] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.152015] initcall i8042_init+0x0/0x143 returned 0 after 7812 usecs
[ 22.156007] calling serio_raw_init+0x0/0x42 @ 1
[ 22.161057] initcall serio_raw_init+0x0/0x42 returned 0 after 0 usecs
[ 22.164075] calling emu_init+0x0/0x42 @ 1
[ 22.168299] initcall emu_init+0x0/0x42 returned 0 after 0 usecs
[ 22.172106] calling fm801_gp_init+0x0/0x42 @ 1
[ 22.176274] initcall fm801_gp_init+0x0/0x42 returned 0 after 0 usecs
[ 22.180057] calling l4_init+0x0/0xa8 @ 1
[ 22.184020] initcall l4_init+0x0/0xa8 returned -19 after 0 usecs
[ 22.188006] calling ns558_init+0x0/0x60 @ 1
[ 22.212079] initcall ns558_init+0x0/0x60 returned -19 after 19531 usecs
[ 22.216005] calling mousedev_init+0x0/0xb3 @ 1
[ 22.224025] usb usb5: suspend_rh (auto-stop)
[ 22.228367] mice: PS/2 mouse device common for all mice
[ 22.232050] initcall mousedev_init+0x0/0xb3 returned 0 after 11718 usecs
[ 22.236006] calling joydev_init+0x0/0x39 @ 1
[ 22.240008] initcall joydev_init+0x0/0x39 returned 0 after 0 usecs
[ 22.244005] calling evdev_init+0x0/0x39 @ 1
[ 22.248006] initcall evdev_init+0x0/0x39 returned 0 after 0 usecs
[ 22.252008] calling evbug_init+0x0/0x39 @ 1
[ 22.256006] initcall evbug_init+0x0/0x39 returned 0 after 0 usecs
[ 22.260006] calling atkbd_init+0x0/0x4e @ 1
[ 22.264269] initcall atkbd_init+0x0/0x4e returned 0 after 0 usecs
[ 22.268052] calling sunkbd_init+0x0/0x42 @ 1
[ 22.272479] initcall sunkbd_init+0x0/0x42 returned 0 after 0 usecs
[ 22.276050] calling xtkbd_init+0x0/0x42 @ 1
[ 22.280253] initcall xtkbd_init+0x0/0x42 returned 0 after 0 usecs
[ 22.284106] calling nkbd_init+0x0/0x42 @ 1
[ 22.288269] initcall nkbd_init+0x0/0x42 returned 0 after 0 usecs
[ 22.292049] calling skbd_init+0x0/0x42 @ 1
[ 22.296260] initcall skbd_init+0x0/0x42 returned 0 after 0 usecs
[ 22.300059] calling gpio_keys_init+0x0/0x39 @ 1
[ 22.304397] initcall gpio_keys_init+0x0/0x39 returned 0 after 0 usecs
[ 22.308047] calling usb_acecad_init+0x0/0x5e @ 1
[ 22.312263] usbcore: registered new interface driver usb_acecad
[ 22.316060] acecad: v3.2:USB Acecad Flair tablet driver
[ 22.320005] initcall usb_acecad_init+0x0/0x5e returned 0 after 7812 usecs
[ 22.324007] calling gtco_init+0x0/0x77 @ 1
[ 22.328276] usbcore: registered new interface driver gtco
[ 22.332052] GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x77 returned 0 after 7812 usecs
[ 22.340014] calling kbtab_init+0x0/0x5e @ 1
[ 22.344317] usbcore: registered new interface driver kbtab
[ 22.348052] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[ 22.352005] initcall kbtab_init+0x0/0x5e returned 0 after 7812 usecs
[ 22.356005] calling wacom_init+0x0/0x6a @ 1
[ 22.360261] usbcore: registered new interface driver wacom
[ 22.364050] wacom: v1.50:USB Wacom Graphire and Wacom Intuos tablet driver
[ 22.368005] initcall wacom_init+0x0/0x6a returned 0 after 7812 usecs
[ 22.372008] calling apanel_init+0x0/0x1b9 @ 1
[ 22.376093] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 22.380007] initcall apanel_init+0x0/0x1b9 returned -19 after 3906 usecs
[ 22.384006] calling ati_remote_init+0x0/0x70 @ 1
[ 22.388262] usbcore: registered new interface driver ati_remote
[ 22.392049] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
[ 22.396008] initcall ati_remote_init+0x0/0x70 returned 0 after 7812 usecs
[ 22.400006] calling ati_remote2_init+0x0/0x70 @ 1
[ 22.404253] usbcore: registered new interface driver ati_remote2
[ 22.408050] ati_remote2: ATI/Philips USB RF remote driver 0.3
[ 22.412008] initcall ati_remote2_init+0x0/0x70 returned 0 after 7812 usecs
[ 22.416004] calling cm109_init+0x0/0x69 @ 1
[ 22.420006] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 22.424251] usbcore: registered new interface driver cm109
[ 22.428050] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 22.432007] initcall cm109_init+0x0/0x69 returned 0 after 11718 usecs
[ 22.436006] calling usb_keyspan_init+0x0/0x60 @ 1
[ 22.440252] usbcore: registered new interface driver keyspan_remote
[ 22.444054] initcall usb_keyspan_init+0x0/0x60 returned 0 after 3906 usecs
[ 22.448004] calling pcspkr_init+0x0/0x39 @ 1
[ 22.452419] input: PC Speaker as /class/input/input0
[ 22.456705] evbug.c: Connected device: input0 (PC Speaker at isa0061/input0)
[ 22.460284] initcall pcspkr_init+0x0/0x39 returned 0 after 7812 usecs
[ 22.464046] calling rotary_encoder_init+0x0/0x39 @ 1
[ 22.468249] initcall rotary_encoder_init+0x0/0x39 returned 0 after 0 usecs
[ 22.472064] calling ali1563_init+0x0/0x42 @ 1
[ 22.476291] initcall ali1563_init+0x0/0x42 returned 0 after 0 usecs
[ 22.480047] calling i2c_ali15x3_init+0x0/0x42 @ 1
[ 22.488054] initcall i2c_ali15x3_init+0x0/0x42 returned 0 after 3906 usecs
[ 22.492009] calling amd756_init+0x0/0x42 @ 1
[ 22.496281] initcall amd756_init+0x0/0x42 returned 0 after 0 usecs
[ 22.500049] calling i2c_amd8111_init+0x0/0x42 @ 1
[ 22.504275] initcall i2c_amd8111_init+0x0/0x42 returned 0 after 0 usecs
[ 22.508047] calling i2c_i801_init+0x0/0xc4 @ 1
[ 22.512338] initcall i2c_i801_init+0x0/0xc4 returned 0 after 0 usecs
[ 22.516048] calling i2c_sch_init+0x0/0x42 @ 1
[ 22.520273] initcall i2c_sch_init+0x0/0x42 returned 0 after 0 usecs
[ 22.524047] calling i2c_piix4_init+0x0/0x42 @ 1
[ 22.528275] initcall i2c_piix4_init+0x0/0x42 returned 0 after 0 usecs
[ 22.532048] calling i2c_sis5595_init+0x0/0x42 @ 1
[ 22.536281] initcall i2c_sis5595_init+0x0/0x42 returned 0 after 0 usecs
[ 22.540048] calling i2c_sis630_init+0x0/0x42 @ 1
[ 22.544272] initcall i2c_sis630_init+0x0/0x42 returned 0 after 0 usecs
[ 22.548047] calling i2c_sis96x_init+0x0/0x42 @ 1
[ 22.552274] initcall i2c_sis96x_init+0x0/0x42 returned 0 after 0 usecs
[ 22.556047] calling i2c_vt586b_init+0x0/0x42 @ 1
[ 22.560272] initcall i2c_vt586b_init+0x0/0x42 returned 0 after 0 usecs
[ 22.564048] calling ocores_i2c_init+0x0/0x39 @ 1
[ 22.568263] initcall ocores_i2c_init+0x0/0x39 returned 0 after 0 usecs
[ 22.572048] calling i2c_adap_simtec_init+0x0/0x39 @ 1
[ 22.576248] initcall i2c_adap_simtec_init+0x0/0x39 returned 0 after 0 usecs
[ 22.580047] calling i2c_parport_init+0x0/0x171 @ 1
[ 22.584003] i2c-parport-light: adapter type unspecified
[ 22.588007] initcall i2c_parport_init+0x0/0x171 returned -19 after 3906 usecs
[ 22.592004] calling usb_i2c_tiny_usb_init+0x0/0x42 @ 1
[ 22.596260] usbcore: registered new interface driver i2c-tiny-usb
[ 22.600054] initcall usb_i2c_tiny_usb_init+0x0/0x42 returned 0 after 3906 usecs
[ 22.604006] calling i2c_voodoo3_init+0x0/0x42 @ 1
[ 22.608275] initcall i2c_voodoo3_init+0x0/0x42 returned 0 after 0 usecs
[ 22.612050] calling i2c_pca_pf_init+0x0/0x39 @ 1
[ 22.616247] initcall i2c_pca_pf_init+0x0/0x39 returned 0 after 0 usecs
[ 22.620047] calling max6875_init+0x0/0x3b @ 1
[ 22.624248] initcall max6875_init+0x0/0x3b returned 0 after 0 usecs
[ 22.628047] calling tsl2550_init+0x0/0x3b @ 1
[ 22.632251] initcall tsl2550_init+0x0/0x3b returned 0 after 0 usecs
[ 22.636048] calling dabusb_init+0x0/0x11b @ 1
[ 22.640253] usbcore: registered new interface driver dabusb
[ 22.644050] dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999
[ 22.648007] initcall dabusb_init+0x0/0x11b returned 0 after 7812 usecs
[ 22.652008] calling w1_init+0x0/0xcd @ 1
[ 22.656003] Driver for 1-wire Dallas network protocol.
[ 22.660769] initcall w1_init+0x0/0xcd returned 0 after 3906 usecs
[ 22.664045] calling matrox_w1_init+0x0/0x42 @ 1
[ 22.672250] initcall matrox_w1_init+0x0/0x42 returned 0 after 3906 usecs
[ 22.676102] calling ds_init+0x0/0x65 @ 1
[ 22.680255] usbcore: registered new interface driver DS9490R
[ 22.684053] initcall ds_init+0x0/0x65 returned 0 after 3906 usecs
[ 22.688005] calling sensors_ds2482_init+0x0/0x3b @ 1
[ 22.692247] initcall sensors_ds2482_init+0x0/0x3b returned 0 after 0 usecs
[ 22.700009] calling w1_therm_init+0x0/0x5b @ 1
[ 22.704057] initcall w1_therm_init+0x0/0x5b returned 0 after 0 usecs
[ 22.708007] calling w1_smem_init+0x0/0x65 @ 1
[ 22.712007] initcall w1_smem_init+0x0/0x65 returned 0 after 0 usecs
[ 22.716006] calling w1_f2d_init+0x0/0x39 @ 1
[ 22.720024] initcall w1_f2d_init+0x0/0x39 returned 0 after 0 usecs
[ 22.724006] calling w1_ds2760_init+0x0/0x51 @ 1
[ 22.728003] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 22.732010] initcall w1_ds2760_init+0x0/0x51 returned 0 after 3906 usecs
[ 22.736004] calling w1_bq27000_init+0x0/0x49 @ 1
[ 22.740007] initcall w1_bq27000_init+0x0/0x49 returned -17 after 0 usecs
[ 22.744006] initcall w1_bq27000_init+0x0/0x49 returned with error code -17
[ 22.748006] calling pda_power_init+0x0/0x39 @ 1
[ 22.752253] initcall pda_power_init+0x0/0x39 returned 0 after 0 usecs
[ 22.756048] calling ds2760_battery_init+0x0/0x39 @ 1
[ 22.760248] initcall ds2760_battery_init+0x0/0x39 returned 0 after 0 usecs
[ 22.764049] calling da903x_battery_init+0x0/0x3e @ 1
[ 22.768251] initcall da903x_battery_init+0x0/0x3e returned 0 after 0 usecs
[ 22.772048] calling asb100_init+0x0/0x3b @ 1
[ 22.776260] initcall asb100_init+0x0/0x3b returned 0 after 0 usecs
[ 22.780049] calling sensors_w83627hf_init+0x0/0x9e @ 1
[ 22.784016] w83627hf: Found W83697HF chip at 0x290
[ 22.793380] initcall sensors_w83627hf_init+0x0/0x9e returned 0 after 7812 usecs
[ 22.796047] calling sensors_w83792d_init+0x0/0x3b @ 1
[ 22.800253] initcall sensors_w83792d_init+0x0/0x3b returned 0 after 0 usecs
[ 22.804102] calling sensors_w83793_init+0x0/0x3b @ 1
[ 22.808248] initcall sensors_w83793_init+0x0/0x3b returned 0 after 0 usecs
[ 22.812048] calling sensors_w83781d_init+0x0/0x3b @ 1
[ 22.816244] initcall sensors_w83781d_init+0x0/0x3b returned 0 after 0 usecs
[ 22.820060] calling abituguru_init+0x0/0x1a2 @ 1
[ 22.824005] initcall abituguru_init+0x0/0x1a2 returned -19 after 0 usecs
[ 22.828007] calling abituguru3_init+0x0/0x185 @ 1
[ 22.832005] initcall abituguru3_init+0x0/0x185 returned -19 after 0 usecs
[ 22.836006] calling ad7418_init+0x0/0x3b @ 1
[ 22.840259] initcall ad7418_init+0x0/0x3b returned 0 after 0 usecs
[ 22.844046] calling sm_adm1026_init+0x0/0x3b @ 1
[ 22.848243] initcall sm_adm1026_init+0x0/0x3b returned 0 after 0 usecs
[ 22.852052] calling sensors_adm1029_init+0x0/0x3b @ 1
[ 22.856247] initcall sensors_adm1029_init+0x0/0x3b returned 0 after 0 usecs
[ 22.860047] calling sensors_ads7828_init+0x0/0x78 @ 1
[ 22.864244] initcall sensors_ads7828_init+0x0/0x78 returned 0 after 0 usecs
[ 22.868047] calling adt7473_init+0x0/0x3b @ 1
[ 22.872248] initcall adt7473_init+0x0/0x3b returned 0 after 0 usecs
[ 22.876048] calling sensors_adt7475_init+0x0/0x3b @ 1
[ 22.880243] initcall sensors_adt7475_init+0x0/0x3b returned 0 after 0 usecs
[ 22.884047] calling applesmc_init+0x0/0x455 @ 1
[ 22.888009] applesmc: supported laptop not found!
[ 22.892005] applesmc: driver init failed (ret=-19)!
[ 22.896005] initcall applesmc_init+0x0/0x455 returned -19 after 7812 usecs
[ 22.900009] calling atxp1_init+0x0/0x3b @ 1
[ 22.908190] initcall atxp1_init+0x0/0x3b returned 0 after 3906 usecs
[ 22.912018] calling coretemp_init+0x0/0x13a @ 1
[ 22.916006] initcall coretemp_init+0x0/0x13a returned -19 after 0 usecs
[ 22.920004] calling dme1737_init+0x0/0xdb @ 1
[ 22.924262] initcall dme1737_init+0x0/0xdb returned 0 after 0 usecs
[ 22.928046] calling f71805f_init+0x0/0x9f @ 1
[ 22.932024] initcall f71805f_init+0x0/0x9f returned -19 after 0 usecs
[ 22.936006] calling f71882fg_init+0x0/0xa6 @ 1
[ 22.940023] initcall f71882fg_init+0x0/0xa6 returned -19 after 0 usecs
[ 22.944004] calling sm_fscpos_init+0x0/0x3b @ 1
[ 22.948251] initcall sm_fscpos_init+0x0/0x3b returned 0 after 0 usecs
[ 22.952037] calling g760a_init+0x0/0x3b @ 1
[ 22.960047] initcall g760a_init+0x0/0x3b returned 0 after 3906 usecs
[ 22.964006] calling sensors_gl518sm_init+0x0/0x3b @ 1
[ 22.972075] initcall sensors_gl518sm_init+0x0/0x3b returned 0 after 3906 usecs
[ 22.976033] calling aem_init+0x0/0x75 @ 1
[ 22.980251] initcall aem_init+0x0/0x75 returned 0 after 0 usecs
[ 22.984030] calling ibmpex_init+0x0/0x39 @ 1
[ 22.988008] initcall ibmpex_init+0x0/0x39 returned 0 after 0 usecs
[ 22.992004] calling sm_it87_init+0x0/0x8d @ 1
[ 22.996019] initcall sm_it87_init+0x0/0x8d returned -19 after 0 usecs
[ 23.000006] calling sensors_lm63_init+0x0/0x3b @ 1
[ 23.004257] initcall sensors_lm63_init+0x0/0x3b returned 0 after 0 usecs
[ 23.012029] calling sensors_lm75_init+0x0/0x3b @ 1
[ 23.016251] initcall sensors_lm75_init+0x0/0x3b returned 0 after 0 usecs
[ 23.020044] calling sensors_lm80_init+0x0/0x3b @ 1
[ 23.024248] initcall sensors_lm80_init+0x0/0x3b returned 0 after 0 usecs
[ 23.028044] calling sm_lm85_init+0x0/0x3b @ 1
[ 23.032245] initcall sm_lm85_init+0x0/0x3b returned 0 after 0 usecs
[ 23.036047] calling sensors_lm90_init+0x0/0x3b @ 1
[ 23.040248] initcall sensors_lm90_init+0x0/0x3b returned 0 after 0 usecs
[ 23.044048] calling sensors_lm92_init+0x0/0x3b @ 1
[ 23.048097] Starting ring buffer hammer
[ 33.000007] End ring buffer hammer
[ 33.003532] CPA self-test:
[ 33.004152] 4k 1328 large 509 gb 0 x 1533[ffff880000000000-ffff88003fc00000] miss 0
[ 33.031310] 4k 151856 large 215 gb 0 x 151767[ffff880000000000-ffff88003fdff000] miss 0
[ 33.051514] 4k 151856 large 215 gb 0 x 151767[ffff880000000000-ffff88003fdff000] miss 0
[ 33.052010] ok.
[ 33.056282] initcall sensors_lm92_init+0x0/0x3b returned 0 after 9773437 usecs
[ 33.060022] calling sensors_lm95241_init+0x0/0x3b @ 1
[ 33.064269] initcall sensors_lm95241_init+0x0/0x3b returned 0 after 0 usecs
[ 33.068055] calling ltc4215_init+0x0/0x3b @ 1
[ 33.072247] initcall ltc4215_init+0x0/0x3b returned 0 after 0 usecs
[ 33.076039] calling ltc4245_init+0x0/0x3b @ 1
[ 33.080244] initcall ltc4245_init+0x0/0x3b returned 0 after 0 usecs
[ 33.084043] calling sensors_max1619_init+0x0/0x3b @ 1
[ 33.088237] initcall sensors_max1619_init+0x0/0x3b returned 0 after 0 usecs
[ 33.092044] calling sensors_max6650_init+0x0/0x3b @ 1
[ 33.096236] initcall sensors_max6650_init+0x0/0x3b returned 0 after 0 usecs
[ 33.100050] calling pc87360_init+0x0/0xe9 @ 1
[ 33.104013] pc87360: PC8736x not detected, module not inserted.
[ 33.108006] initcall pc87360_init+0x0/0xe9 returned -19 after 3906 usecs
[ 33.112006] calling pc87427_init+0x0/0x96 @ 1
[ 33.116019] initcall pc87427_init+0x0/0x96 returned -19 after 0 usecs
[ 33.120004] calling sht15_init+0x0/0x80 @ 1
[ 33.125210] initcall sht15_init+0x0/0x80 returned 0 after 0 usecs
[ 33.128043] calling smsc47m192_init+0x0/0x3b @ 1
[ 33.132243] initcall smsc47m192_init+0x0/0x3b returned 0 after 0 usecs
[ 33.136221] calling sm_via686a_init+0x0/0x42 @ 1
[ 33.140297] initcall sm_via686a_init+0x0/0x42 returned 0 after 0 usecs
[ 33.144044] calling sm_vt8231_init+0x0/0x42 @ 1
[ 33.148272] initcall sm_vt8231_init+0x0/0x42 returned 0 after 0 usecs
[ 33.152076] calling sensors_w83l785ts_init+0x0/0x3b @ 1
[ 33.156241] initcall sensors_w83l785ts_init+0x0/0x3b returned 0 after 0 usecs
[ 33.160046] calling sensors_w83l786ng_init+0x0/0x3b @ 1
[ 33.164247] initcall sensors_w83l786ng_init+0x0/0x3b returned 0 after 0 usecs
[ 33.168051] calling pcipcwd_init_module+0x0/0x5c @ 1
[ 33.172269] initcall pcipcwd_init_module+0x0/0x5c returned 0 after 0 usecs
[ 33.176045] calling usb_pcwd_init+0x0/0x70 @ 1
[ 33.180265] usbcore: registered new interface driver pcwd_usb
[ 33.184048] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02
[ 33.188007] initcall usb_pcwd_init+0x0/0x70 returned 0 after 7812 usecs
[ 33.192004] calling acq_init+0x0/0x83 @ 1
[ 33.196005] WDT driver for Acquire single board computer initialising.
[ 33.200534] acquirewdt: I/O address 0x0043 already in use
[ 33.208025] acquirewdt: probe of acquirewdt failed with error -5
[ 33.212013] initcall acq_init+0x0/0x83 returned 0 after 15625 usecs
[ 33.216005] calling advwdt_init+0x0/0x83 @ 1
[ 33.220006] WDT driver for Advantech single board computer initialising.
[ 33.228901] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[ 33.232033] initcall advwdt_init+0x0/0x83 returned 0 after 11718 usecs
[ 33.236006] calling watchdog_init+0x0/0xf1 @ 1
[ 33.240034] initcall watchdog_init+0x0/0xf1 returned -19 after 0 usecs
[ 33.244007] calling alim7101_wdt_init+0x0/0x1b7 @ 1
[ 33.248003] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[ 33.252019] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[ 33.256007] initcall alim7101_wdt_init+0x0/0x1b7 returned -16 after 7812 usecs
[ 33.260006] initcall alim7101_wdt_init+0x0/0x1b7 returned with error code -16
[ 33.264004] calling ibwdt_init+0x0/0x83 @ 1
[ 33.268005] ib700wdt: WDT driver for IB700 single board computer initialising.
[ 33.272560] ib700wdt: START method I/O 443 is not available.
[ 33.276116] ib700wdt: probe of ib700wdt failed with error -5
[ 33.280011] initcall ibwdt_init+0x0/0x83 returned 0 after 11718 usecs
[ 33.284006] calling ibmasr_init+0x0/0xdb @ 1
[ 33.288006] initcall ibmasr_init+0x0/0xdb returned -19 after 0 usecs
[ 33.292009] calling wafwdt_init+0x0/0x18e @ 1
[ 33.296003] WDT driver for Wafer 5823 single board computer initialising.
[ 33.300011] Wafer 5823 WDT: I/O address 0x0443 already in use
[ 33.304009] initcall wafwdt_init+0x0/0x18e returned -5 after 7812 usecs
[ 33.308006] initcall wafwdt_init+0x0/0x18e returned with error code -5
[ 33.312005] calling watchdog_init+0x0/0x8a @ 1
[ 33.316006] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
[ 33.320550] initcall watchdog_init+0x0/0x8a returned 0 after 3906 usecs
[ 33.324069] calling iTCO_wdt_init_module+0x0/0x8a @ 1
[ 33.328005] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 33.332622] iTCO_wdt: No card detected
[ 33.336102] initcall iTCO_wdt_init_module+0x0/0x8a returned 0 after 7812 usecs
[ 33.340008] calling iTCO_vendor_init_module+0x0/0x41 @ 1
[ 33.344003] iTCO_vendor_support: vendor-support=0
[ 33.348006] initcall iTCO_vendor_init_module+0x0/0x41 returned 0 after 3906 usecs
[ 33.352006] calling it8712f_wdt_init+0x0/0x114 @ 1
[ 33.356072] initcall it8712f_wdt_init+0x0/0x114 returned -19 after 0 usecs
[ 33.360005] calling it87_wdt_init+0x0/0x4ed @ 1
[ 33.364031] IT87 WDT: no device
[ 33.368005] initcall it87_wdt_init+0x0/0x4ed returned -19 after 3906 usecs
[ 33.372007] calling hpwdt_init+0x0/0x42 @ 1
[ 33.376283] initcall hpwdt_init+0x0/0x42 returned 0 after 0 usecs
[ 33.380078] calling sc1200wdt_init+0x0/0x13a @ 1
[ 33.384021] sc1200wdt: build 20020303
[ 33.388005] sc1200wdt: io parameter must be specified
[ 33.392005] initcall sc1200wdt_init+0x0/0x13a returned -22 after 7812 usecs
[ 33.396006] initcall sc1200wdt_init+0x0/0x13a returned with error code -22
[ 33.400008] calling pc87413_init+0x0/0xb5 @ 1
[ 33.404004] pc87413 WDT: Version 1.1 at io 0x2E
[ 33.408005] pc87413 WDT: cannot register miscdev on minor=130 (err=-16)
[ 33.412009] initcall pc87413_init+0x0/0xb5 returned -16 after 7812 usecs
[ 33.416005] initcall pc87413_init+0x0/0xb5 returned with error code -16
[ 33.420006] calling sbc60xxwdt_init+0x0/0x1ab @ 1
[ 33.424008] sbc60xxwdt: I/O address 0x0443 already in use
[ 33.428006] initcall sbc60xxwdt_init+0x0/0x1ab returned -5 after 3906 usecs
[ 33.432005] initcall sbc60xxwdt_init+0x0/0x1ab returned with error code -5
[ 33.436008] calling cpu5wdt_init_module+0x0/0x37 @ 1
[ 33.440008] cpu5wdt: misc_register failed
[ 33.444008] initcall cpu5wdt_init_module+0x0/0x37 returned -16 after 3906 usecs
[ 33.448006] initcall cpu5wdt_init_module+0x0/0x37 returned with error code -16
[ 33.452007] calling sch311x_wdt_init+0x0/0x176 @ 1
[ 33.456025] initcall sch311x_wdt_init+0x0/0x176 returned -19 after 0 usecs
[ 33.460007] calling wb_smsc_wdt_init+0x0/0x1de @ 1
[ 33.464003] SMsC 37B787 watchdog component driver 1.1 initialising...
[ 33.469043] smsc37b787_wdt: Unable to register miscdev on minor 130
[ 33.472009] initcall wb_smsc_wdt_init+0x0/0x1de returned -16 after 7812 usecs
[ 33.476006] initcall wb_smsc_wdt_init+0x0/0x1de returned with error code -16
[ 33.480004] calling wdt_init+0x0/0x20e @ 1
[ 33.484005] w83697hf/hg WDT: WDT driver for W83697HF/HG initializing
[ 33.488005] w83697hf/hg WDT: Looking for watchdog at address 0x2e
[ 33.492016] w83697hf/hg WDT: watchdog found at address 0x2e
[ 33.496103] w83697hf/hg WDT: cannot register miscdev on minor=130 (err=-16)
[ 33.500010] initcall wdt_init+0x0/0x20e returned -16 after 15625 usecs
[ 33.504005] initcall wdt_init+0x0/0x20e returned with error code -16
[ 33.508007] calling wdt_init+0x0/0x14f @ 1
[ 33.512003] WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising.
[ 33.516013] w83697ug/uf WDT: No W83697UG/UF could be found
[ 33.520009] initcall wdt_init+0x0/0x14f returned -19 after 7812 usecs
[ 33.524006] calling w83877f_wdt_init+0x0/0x183 @ 1
[ 33.528008] w83877f_wdt: I/O address 0x0443 already in use
[ 33.532011] initcall w83877f_wdt_init+0x0/0x183 returned -5 after 3906 usecs
[ 33.536005] initcall w83877f_wdt_init+0x0/0x183 returned with error code -5
[ 33.540006] calling zf_init+0x0/0x185 @ 1
[ 33.544004] machzwd: MachZ ZF-Logic Watchdog driver initializing.
[ 33.548007] machzwd: no ZF-Logic found
[ 33.552005] initcall zf_init+0x0/0x185 returned -19 after 7812 usecs
[ 33.556007] calling watchdog_init+0x0/0xde @ 1
[ 33.560006] epx_c3: cannot register miscdev on minor=130 (err=-16)
[ 33.564008] initcall watchdog_init+0x0/0xde returned -16 after 3906 usecs
[ 33.568006] initcall watchdog_init+0x0/0xde returned with error code -16
[ 33.572007] calling watchdog_init+0x0/0xdb @ 1
[ 33.576004] SoftDog: cannot register miscdev on minor=130 (err=-16)
[ 33.580007] initcall watchdog_init+0x0/0xdb returned -16 after 3906 usecs
[ 33.584005] initcall watchdog_init+0x0/0xdb returned with error code -16
[ 33.588006] calling telephony_init+0x0/0x71 @ 1
[ 33.592004] Linux telephony interface: v1.00
[ 33.596016] initcall telephony_init+0x0/0x71 returned 0 after 3906 usecs
[ 33.600006] calling vhci_init+0x0/0x80 @ 1
[ 33.604006] Bluetooth: Virtual HCI driver ver 1.2
[ 33.608349] initcall vhci_init+0x0/0x80 returned 0 after 3906 usecs
[ 33.612058] calling hci_uart_init+0x0/0x104 @ 1
[ 33.616005] Bluetooth: HCI UART driver ver 2.2
[ 33.620006] Bluetooth: HCI H4 protocol initialized
[ 33.624005] initcall hci_uart_init+0x0/0x104 returned 0 after 7812 usecs
[ 33.628007] calling bcm203x_init+0x0/0x78 @ 1
[ 33.632019] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[ 33.636255] usbcore: registered new interface driver bcm203x
[ 33.640059] initcall bcm203x_init+0x0/0x78 returned 0 after 7812 usecs
[ 33.644006] calling init_dtl1_cs+0x0/0x39 @ 1
[ 33.648245] initcall init_dtl1_cs+0x0/0x39 returned 0 after 0 usecs
[ 33.652050] calling init_bt3c_cs+0x0/0x39 @ 1
[ 33.656239] initcall init_bt3c_cs+0x0/0x39 returned 0 after 0 usecs
[ 33.660047] calling init_bluecard_cs+0x0/0x39 @ 1
[ 33.664241] initcall init_bluecard_cs+0x0/0x39 returned 0 after 0 usecs
[ 33.668046] calling init_btuart_cs+0x0/0x39 @ 1
[ 33.672245] initcall init_btuart_cs+0x0/0x39 returned 0 after 0 usecs
[ 33.676046] calling isdn_init+0x0/0x32c @ 1
[ 33.681652] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/none/none/1.1.2.2
[ 33.689967] initcall isdn_init+0x0/0x32c returned 0 after 7812 usecs
[ 33.692007] calling kcapi_init+0x0/0xbb @ 1
[ 33.696092] CAPI Subsystem Rev 1.1.2.8
[ 33.700010] initcall kcapi_init+0x0/0xbb returned 0 after 3906 usecs
[ 33.704005] calling capidrv_init+0x0/0x190 @ 1
[ 33.708074] capidrv: Rev 1.1.2.2: loaded
[ 33.712007] initcall capidrv_init+0x0/0x190 returned 0 after 3906 usecs
[ 33.716006] calling b1pci_init+0x0/0x109 @ 1
[ 33.724268] b1pci: revision 1.1.2.2
[ 33.727864] initcall b1pci_init+0x0/0x109 returned 0 after 3906 usecs
[ 33.728046] calling b1_init+0x0/0xa5 @ 1
[ 33.732007] b1: revision 1.1.2.2
[ 33.736007] initcall b1_init+0x0/0xa5 returned 0 after 3906 usecs
[ 33.740006] calling b1dma_init+0x0/0xa5 @ 1
[ 33.744003] b1dma: revision 1.1.2.3
[ 33.748008] initcall b1dma_init+0x0/0xa5 returned 0 after 3906 usecs
[ 33.752005] calling t1pci_init+0x0/0xe9 @ 1
[ 33.756269] t1pci: revision 1.1.2.2
[ 33.760046] initcall t1pci_init+0x0/0xe9 returned 0 after 3906 usecs
[ 33.764006] calling c4_init+0x0/0x109 @ 1
[ 33.768263] c4: revision 1.1.2.2
[ 33.772048] initcall c4_init+0x0/0x109 returned 0 after 3906 usecs
[ 33.776005] calling divert_init+0x0/0x8a @ 1
[ 33.784029] dss1_divert module successfully installed
[ 33.788005] initcall divert_init+0x0/0x8a returned 0 after 3906 usecs
[ 33.792006] calling HiSax_init+0x0/0x134 @ 1
[ 33.796004] HiSax: Linux Driver for passive ISDN cards
[ 33.800006] HiSax: Version 3.5 (kernel)
[ 33.804003] HiSax: Layer1 Revision 2.46.2.5
[ 33.808006] HiSax: Layer2 Revision 2.30.2.4
[ 33.812004] HiSax: TeiMgr Revision 2.20.2.3
[ 33.816008] HiSax: Layer3 Revision 2.22.2.3
[ 33.820004] HiSax: LinkLayer Revision 2.59.2.4
[ 33.824051] HiSax: Total 1 card defined
[ 33.828133] HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
[ 33.832007] Gazel: Driver Revision 2.19.2.4
[ 33.836003] Gazel: ISA PnP card automatic recognition
[ 33.840007] Gazel: Card ISA R647/R648 found
[ 33.844005] Gazel: config irq:15 isac:0x8180 cfg:0xC180
[ 33.848004] Gazel: hscx A:0x180 hscx B:0x4180
[ 33.902534] Gazel: ISAC version (ff): 2085 V2.3
[ 33.904009] Gazel: HSCX version A: ??? B: ???
[ 33.908003] Gazel: wrong HSCX versions check IO address
[ 33.912118] HiSax: Card Gazel not installed !
[ 33.916008] initcall HiSax_init+0x0/0x134 returned -19 after 117187 usecs
[ 33.920006] calling st5481_usb_init+0x0/0x7e @ 1
[ 33.924003] hisax_st5481: ST5481 USB ISDN driver $Revision: 2.4.2.3 $
[ 33.932222] usbcore: registered new interface driver st5481_usb
[ 33.936058] initcall st5481_usb_init+0x0/0x7e returned 0 after 11718 usecs
[ 33.940007] calling hfc_usb_mod_init+0x0/0xab @ 1
[ 33.944007] HFC-S USB: driver module revision 2.3.2.24 date 2007/10/14 loaded, (debug=0)
[ 33.948241] usbcore: registered new interface driver hfc_usb
[ 33.952051] initcall hfc_usb_mod_init+0x0/0xab returned 0 after 7812 usecs
[ 33.956005] calling isdnloop_init+0x0/0x9f @ 1
[ 33.960005] isdnloop-ISDN-driver Rev 1.11.6.7
[ 33.964035] isdnloop: (loop0) virtual card added
[ 33.968007] initcall isdnloop_init+0x0/0x9f returned 0 after 7812 usecs
[ 33.972006] calling gigaset_init_module+0x0/0x50 @ 1
[ 33.976005] gigaset: Driver for Gigaset 307x
[ 33.980005] initcall gigaset_init_module+0x0/0x50 returned 0 after 3906 usecs
[ 33.984006] calling usb_gigaset_init+0x0/0xbe @ 1
[ 33.988354] usbcore: registered new interface driver usb_gigaset
[ 33.992047] usb_gigaset: USB Driver for Gigaset 307x using M105
[ 33.996006] initcall usb_gigaset_init+0x0/0xbe returned 0 after 7812 usecs
[ 34.000009] calling bas_gigaset_init+0x0/0xbe @ 1
[ 34.004290] usbcore: registered new interface driver bas_gigaset
[ 34.008047] bas_gigaset: USB Driver for Gigaset 307x
[ 34.012008] initcall bas_gigaset_init+0x0/0xbe returned 0 after 7812 usecs
[ 34.016006] calling cpufreq_stats_init+0x0/0x94 @ 1
[ 34.020022] initcall cpufreq_stats_init+0x0/0x94 returned 0 after 0 usecs
[ 34.024008] calling cpufreq_gov_userspace_init+0x0/0x39 @ 1
[ 34.028007] initcall cpufreq_gov_userspace_init+0x0/0x39 returned 0 after 0 usecs
[ 34.032006] calling cpufreq_gov_dbs_init+0x0/0x8e @ 1
[ 34.036076] initcall cpufreq_gov_dbs_init+0x0/0x8e returned 0 after 0 usecs
[ 34.040045] calling init_ladder+0x0/0x39 @ 1
[ 34.044027] cpuidle: using governor ladder
[ 34.048009] initcall init_ladder+0x0/0x39 returned 0 after 3906 usecs
[ 34.052006] calling i7300_idle_init+0x0/0x1aa @ 1
[ 34.056063] initcall i7300_idle_init+0x0/0x1aa returned -19 after 0 usecs
[ 34.060006] calling mmc_test_init+0x0/0x39 @ 1
[ 34.064240] initcall mmc_test_init+0x0/0x39 returned 0 after 0 usecs
[ 34.068015] calling sdhci_drv_init+0x0/0x49 @ 1
[ 34.072006] sdhci: Secure Digital Host Controller Interface driver
[ 34.076003] sdhci: Copyright(c) Pierre Ossman
[ 34.080006] initcall sdhci_drv_init+0x0/0x49 returned 0 after 7812 usecs
[ 34.084006] calling sdhci_drv_init+0x0/0x42 @ 1
[ 34.088272] initcall sdhci_drv_init+0x0/0x42 returned 0 after 0 usecs
[ 34.092044] calling ricoh_mmc_drv_init+0x0/0x5c @ 1
[ 34.096006] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 34.100005] ricoh-mmc: Copyright(c) Philip Langdale
[ 34.104273] initcall ricoh_mmc_drv_init+0x0/0x5c returned 0 after 7812 usecs
[ 34.108036] calling wbsd_drv_init+0x0/0xb5 @ 1
[ 34.112004] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 34.116005] wbsd: Copyright(c) Pierre Ossman
[ 34.120682] wbsd: Unknown hardware (id 6012) found at 2e
[ 34.124050] wbsd: Unknown hardware (id 6012) found at 2e
[ 34.128086] initcall wbsd_drv_init+0x0/0xb5 returned 0 after 15625 usecs
[ 34.132008] calling memstick_init+0x0/0xab @ 1
[ 34.136582] initcall memstick_init+0x0/0xab returned 0 after 0 usecs
[ 34.140067] calling mspro_block_init+0x0/0x98 @ 1
[ 34.144254] initcall mspro_block_init+0x0/0x98 returned 0 after 0 usecs
[ 34.148069] calling tifm_ms_init+0x0/0x39 @ 1
[ 34.152247] initcall tifm_ms_init+0x0/0x39 returned 0 after 0 usecs
[ 34.156050] calling alix_led_init+0x0/0x11b @ 1
[ 34.160754] initcall alix_led_init+0x0/0x11b returned -19 after 0 usecs
[ 34.164004] calling pca9532_init+0x0/0x3b @ 1
[ 34.168251] initcall pca9532_init+0x0/0x3b returned 0 after 0 usecs
[ 34.172050] calling pca955x_leds_init+0x0/0x3b @ 1
[ 34.176239] initcall pca955x_leds_init+0x0/0x3b returned 0 after 0 usecs
[ 34.180045] calling timer_trig_init+0x0/0x39 @ 1
[ 34.184090] initcall timer_trig_init+0x0/0x39 returned 0 after 0 usecs
[ 34.188004] calling heartbeat_trig_init+0x0/0x39 @ 1
[ 34.192010] initcall heartbeat_trig_init+0x0/0x39 returned 0 after 0 usecs
[ 34.196004] calling bl_trig_init+0x0/0x39 @ 1
[ 34.200010] initcall bl_trig_init+0x0/0x39 returned 0 after 0 usecs
[ 34.204005] calling gpio_trig_init+0x0/0x39 @ 1
[ 34.208008] initcall gpio_trig_init+0x0/0x39 returned 0 after 0 usecs
[ 34.212005] calling defon_trig_init+0x0/0x39 @ 1
[ 34.216010] initcall defon_trig_init+0x0/0x39 returned 0 after 0 usecs
[ 34.220004] calling dcdrbu_init+0x0/0x169 @ 1
[ 34.224284] initcall dcdrbu_init+0x0/0x169 returned 0 after 0 usecs
[ 34.228045] calling dcdbas_init+0x0/0x8d @ 1
[ 34.232550] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 34.236049] initcall dcdbas_init+0x0/0x8d returned 0 after 3906 usecs
[ 34.240008] calling ibft_init+0x0/0x1e6 @ 1
[ 34.244012] No iBFT detected.
[ 34.248007] initcall ibft_init+0x0/0x1e6 returned 0 after 3906 usecs
[ 34.252007] calling ioat_init_module+0x0/0x42 @ 1
[ 34.256283] initcall ioat_init_module+0x0/0x42 returned 0 after 0 usecs
[ 34.260069] calling hid_init+0x0/0x6e @ 1
[ 34.264489] initcall hid_init+0x0/0x6e returned 0 after 0 usecs
[ 34.268044] calling a4_init+0x0/0x47 @ 1
[ 34.272240] initcall a4_init+0x0/0x47 returned 0 after 0 usecs
[ 34.276077] calling apple_init+0x0/0x63 @ 1
[ 34.280239] initcall apple_init+0x0/0x63 returned 0 after 0 usecs
[ 34.284043] calling belkin_init+0x0/0x47 @ 1
[ 34.288240] initcall belkin_init+0x0/0x47 returned 0 after 0 usecs
[ 34.292052] calling cp_init+0x0/0x47 @ 1
[ 34.296240] initcall cp_init+0x0/0x47 returned 0 after 0 usecs
[ 34.300046] calling ez_init+0x0/0x47 @ 1
[ 34.304246] initcall ez_init+0x0/0x47 returned 0 after 0 usecs
[ 34.308044] calling gyration_init+0x0/0x47 @ 1
[ 34.312249] initcall gyration_init+0x0/0x47 returned 0 after 0 usecs
[ 34.316043] calling ks_init+0x0/0x47 @ 1
[ 34.320241] initcall ks_init+0x0/0x47 returned 0 after 0 usecs
[ 34.324045] calling lg_init+0x0/0x47 @ 1
[ 34.328241] initcall lg_init+0x0/0x47 returned 0 after 0 usecs
[ 34.332045] calling ms_init+0x0/0x47 @ 1
[ 34.336242] initcall ms_init+0x0/0x47 returned 0 after 0 usecs
[ 34.340044] calling mr_init+0x0/0x47 @ 1
[ 34.344250] initcall mr_init+0x0/0x47 returned 0 after 0 usecs
[ 34.348045] calling ntrig_init+0x0/0x47 @ 1
[ 34.352239] initcall ntrig_init+0x0/0x47 returned 0 after 0 usecs
[ 34.356043] calling sony_init+0x0/0x47 @ 1
[ 34.360240] initcall sony_init+0x0/0x47 returned 0 after 0 usecs
[ 34.364042] calling ga_init+0x0/0x42 @ 1
[ 34.368239] initcall ga_init+0x0/0x42 returned 0 after 0 usecs
[ 34.372046] calling tm_init+0x0/0x47 @ 1
[ 34.376255] initcall tm_init+0x0/0x47 returned 0 after 0 usecs
[ 34.380042] calling zp_init+0x0/0x47 @ 1
[ 34.384241] initcall zp_init+0x0/0x47 returned 0 after 0 usecs
[ 34.388042] calling hid_init+0x0/0xf1 @ 1
[ 34.396565] usbcore: registered new interface driver hiddev
[ 34.400314] usbcore: registered new interface driver usbhid
[ 34.404072] usbhid: v2.6:USB HID core driver
[ 34.408008] initcall hid_init+0x0/0xf1 returned 0 after 15625 usecs
[ 34.412005] calling usb_mouse_init+0x0/0x5e @ 1
[ 34.420111] usbcore: registered new interface driver usbmouse
[ 34.424032] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[ 34.428005] initcall usb_mouse_init+0x0/0x5e returned 0 after 11718 usecs
[ 34.432007] calling virtio_pci_init+0x0/0x7b @ 1
[ 34.436309] initcall virtio_pci_init+0x0/0x7b returned 0 after 0 usecs
[ 34.440038] calling init+0x0/0x39 @ 1
[ 34.444236] initcall init+0x0/0x39 returned 0 after 0 usecs
[ 34.448039] calling dell_init+0x0/0x1cb @ 1
[ 34.452007] initcall dell_init+0x0/0x1cb returned -19 after 0 usecs
[ 34.456007] calling init_soundcore+0x0/0x9d @ 1
[ 34.464159] initcall init_soundcore+0x0/0x9d returned 0 after 3906 usecs
[ 34.468015] calling oss_init+0x0/0x161 @ 1
[ 34.476780] initcall oss_init+0x0/0x161 returned 0 after 3906 usecs
[ 34.480040] calling do_init_aedsp16+0x0/0xb9 @ 1
[ 34.484003] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98
[ 34.488004] aedsp16: I/O, IRQ and DMA are mandatory
[ 34.492007] initcall do_init_aedsp16+0x0/0xb9 returned -22 after 7812 usecs
[ 34.496006] initcall do_init_aedsp16+0x0/0xb9 returned with error code -22
[ 34.500006] calling init_pss+0x0/0x295 @ 1
[ 34.504006] pss: mss_io, mss_dma, mss_irq and pss_io must be set.
[ 34.508004] initcall init_pss+0x0/0x295 returned -22 after 3906 usecs
[ 34.512006] initcall init_pss+0x0/0x295 returned with error code -22
[ 34.516005] calling init_ad1848+0x0/0x19a @ 1
[ 34.520004] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
[ 34.524005] initcall init_ad1848+0x0/0x19a returned 0 after 3906 usecs
[ 34.528007] calling init_mpu401+0x0/0xbf @ 1
[ 34.532006] initcall init_mpu401+0x0/0xbf returned 0 after 0 usecs
[ 34.536006] calling init_sscape+0x0/0x175 @ 1
[ 34.540004] Soundscape driver Copyright (C) by Hannu Savolainen 1993-1996
[ 34.544004] DMA, IRQ, and IO port must be specified.
[ 34.548005] initcall init_sscape+0x0/0x175 returned -22 after 7812 usecs
[ 34.552007] initcall init_sscape+0x0/0x175 returned with error code -22
[ 34.556004] calling init_pas2+0x0/0x120 @ 1
[ 34.560004] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996
[ 34.564004] I/O, IRQ, DMA and type are mandatory
[ 34.568006] initcall init_pas2+0x0/0x120 returned -22 after 7812 usecs
[ 34.572006] initcall init_pas2+0x0/0x120 returned with error code -22
[ 34.576007] calling sb_init+0x0/0x1cd @ 1
[ 34.580003] sb: Init: Starting Probe...
[ 34.584004] sb: Error: At least io, irq, and dma must be set for legacy cards.
[ 34.588004] sb: Init: Done
[ 34.590822] initcall sb_init+0x0/0x1cd returned -19 after 7812 usecs
[ 34.592006] calling init_uart401+0x0/0x76 @ 1
[ 34.596005] initcall init_uart401+0x0/0x76 returned 0 after 0 usecs
[ 34.600008] calling kahlua_init_module+0x0/0x4e @ 1
[ 34.604003] Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc
[ 34.608281] initcall kahlua_init_module+0x0/0x4e returned 0 after 3906 usecs
[ 34.612097] calling init_uart6850+0x0/0xc2 @ 1
[ 34.616005] uart6850: irq and io must be set.
[ 34.620005] initcall init_uart6850+0x0/0xc2 returned -22 after 3906 usecs
[ 34.624024] initcall init_uart6850+0x0/0xc2 returned with error code -22
[ 34.628004] calling init_opl3+0x0/0x6b @ 1
[ 34.632004] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
[ 34.636006] initcall init_opl3+0x0/0x6b returned 0 after 3906 usecs
[ 34.640006] calling init_vmidi+0x0/0x47 @ 1
[ 34.644003] MIDI Loopback device driver
[ 34.648712] initcall init_vmidi+0x0/0x47 returned 0 after 3906 usecs
[ 34.652044] calling oprofile_init+0x0/0x78 @ 1
[ 34.656006] oprofile: using NMI interrupt.
[ 34.660017] initcall oprofile_init+0x0/0x78 returned 0 after 3906 usecs
[ 34.664006] calling flow_cache_init+0x0/0x145 @ 1
[ 34.668389] initcall flow_cache_init+0x0/0x145 returned 0 after 0 usecs
[ 34.672084] calling llc_init+0x0/0x47 @ 1
[ 34.676007] initcall llc_init+0x0/0x47 returned 0 after 0 usecs
[ 34.680006] calling llc2_init+0x0/0xd0 @ 1
[ 34.684067] NET: Registered protocol family 26
[ 34.688007] initcall llc2_init+0x0/0xd0 returned 0 after 3906 usecs
[ 34.692006] calling snap_init+0x0/0x61 @ 1
[ 34.696042] initcall snap_init+0x0/0x61 returned 0 after 0 usecs
[ 34.700006] calling rif_init+0x0/0x9e @ 1
[ 34.704018] initcall rif_init+0x0/0x9e returned 0 after 0 usecs
[ 34.708006] calling nfnetlink_init+0x0/0x86 @ 1
[ 34.712004] Netfilter messages via NETLINK v0.30.
[ 34.716035] initcall nfnetlink_init+0x0/0x86 returned 0 after 3906 usecs
[ 34.720007] calling nfnetlink_queue_init+0x0/0xca @ 1
[ 34.724045] initcall nfnetlink_queue_init+0x0/0xca returned 0 after 0 usecs
[ 34.728006] calling nfnetlink_log_init+0x0/0xfd @ 1
[ 34.732050] initcall nfnetlink_log_init+0x0/0xfd returned 0 after 0 usecs
[ 34.736006] calling nf_conntrack_standalone_init+0x0/0x39 @ 1
[ 34.740005] nf_conntrack version 0.5.0 (8185 buckets, 32740 max)
[ 34.744919] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 34.748043] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 34.752005] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 34.756030] initcall nf_conntrack_standalone_init+0x0/0x39 returned 0 after 15625 usecs
[ 34.760006] calling nf_conntrack_proto_sctp_init+0x0/0x83 @ 1
[ 34.764050] initcall nf_conntrack_proto_sctp_init+0x0/0x83 returned 0 after 0 usecs
[ 34.768008] calling nf_conntrack_proto_udplite_init+0x0/0x69 @ 1
[ 34.772008] initcall nf_conntrack_proto_udplite_init+0x0/0x69 returned 0 after 0 usecs
[ 34.776006] calling nf_conntrack_amanda_init+0x0/0xca @ 1
[ 34.780039] initcall nf_conntrack_amanda_init+0x0/0xca returned 0 after 0 usecs
[ 34.784007] calling nf_conntrack_ftp_init+0x0/0x240 @ 1
[ 34.788009] initcall nf_conntrack_ftp_init+0x0/0x240 returned 0 after 0 usecs
[ 34.792007] calling nf_conntrack_h323_init+0x0/0x166 @ 1
[ 34.796011] initcall nf_conntrack_h323_init+0x0/0x166 returned 0 after 0 usecs
[ 34.800008] calling nf_conntrack_irc_init+0x0/0x1cc @ 1
[ 34.804009] initcall nf_conntrack_irc_init+0x0/0x1cc returned 0 after 0 usecs
[ 34.808006] calling nf_conntrack_sane_init+0x0/0x24b @ 1
[ 34.812010] initcall nf_conntrack_sane_init+0x0/0x24b returned 0 after 0 usecs
[ 34.816007] calling nf_conntrack_sip_init+0x0/0x1ed @ 1
[ 34.820007] initcall nf_conntrack_sip_init+0x0/0x1ed returned 0 after 0 usecs
[ 34.824006] calling nf_conntrack_tftp_init+0x0/0x1a2 @ 1
[ 34.828008] initcall nf_conntrack_tftp_init+0x0/0x1a2 returned 0 after 0 usecs
[ 34.832006] calling nf_tproxy_init+0x0/0x49 @ 1
[ 34.836003] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 34.840005] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 34.844005] initcall nf_tproxy_init+0x0/0x49 returned 0 after 7812 usecs
[ 34.848006] calling xt_init+0x0/0x176 @ 1
[ 34.852033] initcall xt_init+0x0/0x176 returned 0 after 0 usecs
[ 34.856006] calling tcpudp_mt_init+0x0/0x3e @ 1
[ 34.860033] initcall tcpudp_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 34.864007] calling connmark_tg_init+0x0/0x3e @ 1
[ 34.868007] initcall connmark_tg_init+0x0/0x3e returned 0 after 0 usecs
[ 34.872024] calling connsecmark_tg_init+0x0/0x39 @ 1
[ 34.876007] initcall connsecmark_tg_init+0x0/0x39 returned 0 after 0 usecs
[ 34.880006] calling dscp_tg_init+0x0/0x3e @ 1
[ 34.884009] initcall dscp_tg_init+0x0/0x3e returned 0 after 0 usecs
[ 34.888007] calling hl_tg_init+0x0/0x3e @ 1
[ 34.892008] initcall hl_tg_init+0x0/0x3e returned 0 after 0 usecs
[ 34.896006] calling mark_tg_init+0x0/0x3e @ 1
[ 34.900010] initcall mark_tg_init+0x0/0x3e returned 0 after 0 usecs
[ 34.904006] calling nflog_tg_init+0x0/0x39 @ 1
[ 34.908006] initcall nflog_tg_init+0x0/0x39 returned 0 after 0 usecs
[ 34.912007] calling nfqueue_tg_init+0x0/0x3e @ 1
[ 34.916007] initcall nfqueue_tg_init+0x0/0x3e returned 0 after 0 usecs
[ 34.920006] calling secmark_tg_init+0x0/0x39 @ 1
[ 34.924007] initcall secmark_tg_init+0x0/0x39 returned 0 after 0 usecs
[ 34.928006] calling tcpoptstrip_tg_init+0x0/0x3e @ 1
[ 34.932007] initcall tcpoptstrip_tg_init+0x0/0x3e returned 0 after 0 usecs
[ 34.936007] calling xt_cluster_mt_init+0x0/0x39 @ 1
[ 34.940006] initcall xt_cluster_mt_init+0x0/0x39 returned 0 after 0 usecs
[ 34.944006] calling connlimit_mt_init+0x0/0x39 @ 1
[ 34.948007] initcall connlimit_mt_init+0x0/0x39 returned 0 after 0 usecs
[ 34.952006] calling conntrack_mt_init+0x0/0x3e @ 1
[ 34.956007] initcall conntrack_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 34.960007] calling dccp_mt_init+0x0/0xc5 @ 1
[ 34.964013] initcall dccp_mt_init+0x0/0xc5 returned 0 after 0 usecs
[ 34.968006] calling hashlimit_mt_init+0x0/0xcd @ 1
[ 34.972355] initcall hashlimit_mt_init+0x0/0xcd returned 0 after 0 usecs
[ 34.976079] calling helper_mt_init+0x0/0x39 @ 1
[ 34.980006] initcall helper_mt_init+0x0/0x39 returned 0 after 0 usecs
[ 34.984007] calling hl_mt_init+0x0/0x3e @ 1
[ 34.988007] initcall hl_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 34.992006] calling iprange_mt_init+0x0/0x3e @ 1
[ 34.996009] initcall iprange_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 35.000008] calling length_mt_init+0x0/0x3e @ 1
[ 35.004007] initcall length_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 35.008007] calling limit_mt_init+0x0/0x39 @ 1
[ 35.012007] initcall limit_mt_init+0x0/0x39 returned 0 after 0 usecs
[ 35.016006] calling mark_mt_init+0x0/0x3e @ 1
[ 35.020008] initcall mark_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 35.024006] calling multiport_mt_init+0x0/0x3e @ 1
[ 35.028008] initcall multiport_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 35.032007] calling physdev_mt_init+0x0/0x39 @ 1
[ 35.036006] initcall physdev_mt_init+0x0/0x39 returned 0 after 0 usecs
[ 35.040006] calling quota_mt_init+0x0/0x39 @ 1
[ 35.044007] initcall quota_mt_init+0x0/0x39 returned 0 after 0 usecs
[ 35.048006] calling sctp_mt_init+0x0/0x3e @ 1
[ 35.052008] initcall sctp_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 35.056007] calling socket_mt_init+0x0/0x3e @ 1
[ 35.060006] initcall socket_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 35.064006] calling state_mt_init+0x0/0x3e @ 1
[ 35.068008] initcall state_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 35.072006] calling string_mt_init+0x0/0x3e @ 1
[ 35.076007] initcall string_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 35.080007] calling tcpmss_mt_init+0x0/0x3e @ 1
[ 35.084007] initcall tcpmss_mt_init+0x0/0x3e returned 0 after 0 usecs
[ 35.088006] calling u32_mt_init+0x0/0x39 @ 1
[ 35.092008] initcall u32_mt_init+0x0/0x39 returned 0 after 0 usecs
[ 35.096006] calling ip_vs_init+0x0/0xe3 @ 1
[ 35.100139] IPVS: Registered protocols (TCP, AH, ESP)
[ 35.104388] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 35.108041] IPVS: Each connection entry needs 296 bytes at least
[ 35.112068] IPVS: ipvs loaded.
[ 35.116010] initcall ip_vs_init+0x0/0xe3 returned 0 after 15625 usecs
[ 35.120022] calling ip_vs_rr_init+0x0/0x39 @ 1
[ 35.124021] IPVS: [rr] scheduler registered.
[ 35.128008] initcall ip_vs_rr_init+0x0/0x39 returned 0 after 3906 usecs
[ 35.132006] calling ip_vs_wlc_init+0x0/0x39 @ 1
[ 35.136005] IPVS: [wlc] scheduler registered.
[ 35.140006] initcall ip_vs_wlc_init+0x0/0x39 returned 0 after 3906 usecs
[ 35.144006] calling ip_vs_lblc_init+0x0/0x6d @ 1
[ 35.148004] IPVS: [lblc] scheduler registered.
[ 35.152007] initcall ip_vs_lblc_init+0x0/0x6d returned 0 after 3906 usecs
[ 35.156005] calling ip_vs_lblcr_init+0x0/0x6d @ 1
[ 35.160005] IPVS: [lblcr] scheduler registered.
[ 35.164006] initcall ip_vs_lblcr_init+0x0/0x6d returned 0 after 3906 usecs
[ 35.168006] calling ip_vs_dh_init+0x0/0x39 @ 1
[ 35.172005] IPVS: [dh] scheduler registered.
[ 35.176007] initcall ip_vs_dh_init+0x0/0x39 returned 0 after 3906 usecs
[ 35.180004] calling ip_vs_sh_init+0x0/0x39 @ 1
[ 35.184005] IPVS: [sh] scheduler registered.
[ 35.188006] initcall ip_vs_sh_init+0x0/0x39 returned 0 after 3906 usecs
[ 35.192006] calling ip_vs_sed_init+0x0/0x39 @ 1
[ 35.196004] IPVS: [sed] scheduler registered.
[ 35.200009] initcall ip_vs_sed_init+0x0/0x39 returned 0 after 3906 usecs
[ 35.204004] calling ip_vs_nq_init+0x0/0x39 @ 1
[ 35.208005] IPVS: [nq] scheduler registered.
[ 35.212007] initcall ip_vs_nq_init+0x0/0x39 returned 0 after 3906 usecs
[ 35.216006] calling ip_vs_ftp_init+0x0/0xbd @ 1
[ 35.220059] IPVS: ftp: loaded support on port[0] = 21
[ 35.224009] initcall ip_vs_ftp_init+0x0/0xbd returned 0 after 3906 usecs
[ 35.228004] calling ipip_init+0x0/0x95 @ 1
[ 35.232004] IPv4 over IPv4 tunneling driver
[ 35.236498] initcall ipip_init+0x0/0x95 returned 0 after 3906 usecs
[ 35.240051] calling ipgre_init+0x0/0xd7 @ 1
[ 35.244003] GRE over IPv4 tunneling driver
[ 35.248462] initcall ipgre_init+0x0/0xd7 returned 0 after 3906 usecs
[ 35.252042] calling init_syncookies+0x0/0x40 @ 1
[ 35.256041] initcall init_syncookies+0x0/0x40 returned 0 after 0 usecs
[ 35.260005] calling ah4_init+0x0/0x8f @ 1
[ 35.264008] initcall ah4_init+0x0/0x8f returned 0 after 0 usecs
[ 35.268004] calling xfrm4_beet_init+0x0/0x3e @ 1
[ 35.272008] initcall xfrm4_beet_init+0x0/0x3e returned 0 after 0 usecs
[ 35.276004] calling tunnel4_init+0x0/0x59 @ 1
[ 35.280006] initcall tunnel4_init+0x0/0x59 returned 0 after 0 usecs
[ 35.284007] calling ipv4_netfilter_init+0x0/0x3e @ 1
[ 35.288029] initcall ipv4_netfilter_init+0x0/0x3e returned 0 after 0 usecs
[ 35.292006] calling nf_conntrack_l3proto_ipv4_init+0x0/0x153 @ 1
[ 35.296015] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x153 returned 0 after 0 usecs
[ 35.300006] calling nf_defrag_init+0x0/0x3e @ 1
[ 35.304007] initcall nf_defrag_init+0x0/0x3e returned 0 after 0 usecs
[ 35.308005] calling ip_tables_init+0x0/0xd5 @ 1
[ 35.312041] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.316005] initcall ip_tables_init+0x0/0xd5 returned 0 after 3906 usecs
[ 35.320007] calling iptable_filter_init+0x0/0x92 @ 1
[ 35.324040] initcall iptable_filter_init+0x0/0x92 returned 0 after 0 usecs
[ 35.328006] calling iptable_mangle_init+0x0/0x6a @ 1
[ 35.332029] initcall iptable_mangle_init+0x0/0x6a returned 0 after 0 usecs
[ 35.336006] calling iptable_security_init+0x0/0x6a @ 1
[ 35.340022] initcall iptable_security_init+0x0/0x6a returned 0 after 0 usecs
[ 35.344007] calling ah_mt_init+0x0/0x39 @ 1
[ 35.348005] initcall ah_mt_init+0x0/0x39 returned 0 after 0 usecs
[ 35.352005] calling ecn_mt_init+0x0/0x39 @ 1
[ 35.356006] initcall ecn_mt_init+0x0/0x39 returned 0 after 0 usecs
[ 35.360005] calling clusterip_tg_init+0x0/0xbc @ 1
[ 35.364016] ClusterIP Version 0.8 loaded successfully
[ 35.368023] initcall clusterip_tg_init+0x0/0xbc returned 0 after 3906 usecs
[ 35.372005] calling log_tg_init+0x0/0x50 @ 1
[ 35.376008] initcall log_tg_init+0x0/0x50 returned 0 after 0 usecs
[ 35.380005] calling reject_tg_init+0x0/0x39 @ 1
[ 35.384006] initcall reject_tg_init+0x0/0x39 returned 0 after 0 usecs
[ 35.388004] calling ulog_tg_init+0x0/0x145 @ 1
[ 35.392059] initcall ulog_tg_init+0x0/0x145 returned 0 after 0 usecs
[ 35.396004] calling arp_tables_init+0x0/0xb3 @ 1
[ 35.400040] arp_tables: (C) 2002 David S. Miller
[ 35.404006] initcall arp_tables_init+0x0/0xb3 returned 0 after 3906 usecs
[ 35.408005] calling arptable_filter_init+0x0/0x6a @ 1
[ 35.412026] initcall arptable_filter_init+0x0/0x6a returned 0 after 0 usecs
[ 35.416007] calling ip_queue_init+0x0/0x13c @ 1
[ 35.420068] initcall ip_queue_init+0x0/0x13c returned 0 after 0 usecs
[ 35.424006] calling inet_diag_init+0x0/0xe3 @ 1
[ 35.428029] initcall inet_diag_init+0x0/0xe3 returned 0 after 0 usecs
[ 35.432006] calling tcp_diag_init+0x0/0x39 @ 1
[ 35.436027] initcall tcp_diag_init+0x0/0x39 returned 0 after 0 usecs
[ 35.440007] calling cubictcp_register+0x0/0x88 @ 1
[ 35.444004] TCP cubic registered
[ 35.447342] initcall cubictcp_register+0x0/0x88 returned 0 after 0 usecs
[ 35.448006] calling xfrm_user_init+0x0/0x71 @ 1
[ 35.452005] Initializing XFRM netlink socket
[ 35.456046] initcall xfrm_user_init+0x0/0x71 returned 0 after 3906 usecs
[ 35.460004] calling packet_init+0x0/0x6d @ 1
[ 35.464008] NET: Registered protocol family 17
[ 35.468054] initcall packet_init+0x0/0x6d returned 0 after 3906 usecs
[ 35.472006] calling ipsec_pfkey_init+0x0/0xac @ 1
[ 35.476005] NET: Registered protocol family 15
[ 35.480024] initcall ipsec_pfkey_init+0x0/0xac returned 0 after 3906 usecs
[ 35.484004] calling br_init+0x0/0x100 @ 1
[ 35.488395] Bridge firewalling registered
[ 35.492077] initcall br_init+0x0/0x100 returned 0 after 3906 usecs
[ 35.496006] calling ebtables_init+0x0/0x77 @ 1
[ 35.500008] Ebtables v2.0 registered
[ 35.504006] initcall ebtables_init+0x0/0x77 returned 0 after 3906 usecs
[ 35.508004] calling ebtable_broute_init+0x0/0x4a @ 1
[ 35.512084] initcall ebtable_broute_init+0x0/0x4a returned 0 after 0 usecs
[ 35.516005] calling ebtable_filter_init+0x0/0x6a @ 1
[ 35.520026] initcall ebtable_filter_init+0x0/0x6a returned 0 after 0 usecs
[ 35.524006] calling ebtable_nat_init+0x0/0x6a @ 1
[ 35.528027] initcall ebtable_nat_init+0x0/0x6a returned 0 after 0 usecs
[ 35.532006] calling ebt_802_3_init+0x0/0x39 @ 1
[ 35.536008] initcall ebt_802_3_init+0x0/0x39 returned 0 after 0 usecs
[ 35.540004] calling ebt_among_init+0x0/0x39 @ 1
[ 35.544007] initcall ebt_among_init+0x0/0x39 returned 0 after 0 usecs
[ 35.548005] calling ebt_limit_init+0x0/0x39 @ 1
[ 35.552007] initcall ebt_limit_init+0x0/0x39 returned 0 after 0 usecs
[ 35.556004] calling ebt_mark_m_init+0x0/0x39 @ 1
[ 35.560008] initcall ebt_mark_m_init+0x0/0x39 returned 0 after 0 usecs
[ 35.564004] calling ebt_pkttype_init+0x0/0x39 @ 1
[ 35.568007] initcall ebt_pkttype_init+0x0/0x39 returned 0 after 0 usecs
[ 35.572007] calling ebt_stp_init+0x0/0x39 @ 1
[ 35.576007] initcall ebt_stp_init+0x0/0x39 returned 0 after 0 usecs
[ 35.580004] calling ebt_vlan_init+0x0/0x6a @ 1
[ 35.584008] initcall ebt_vlan_init+0x0/0x6a returned 0 after 0 usecs
[ 35.588004] calling ebt_arpreply_init+0x0/0x39 @ 1
[ 35.592007] initcall ebt_arpreply_init+0x0/0x39 returned 0 after 0 usecs
[ 35.596005] calling ebt_mark_init+0x0/0x39 @ 1
[ 35.600008] initcall ebt_mark_init+0x0/0x39 returned 0 after 0 usecs
[ 35.604004] calling ebt_redirect_init+0x0/0x39 @ 1
[ 35.608008] initcall ebt_redirect_init+0x0/0x39 returned 0 after 0 usecs
[ 35.612005] calling ebt_snat_init+0x0/0x39 @ 1
[ 35.616022] initcall ebt_snat_init+0x0/0x39 returned 0 after 0 usecs
[ 35.620005] calling ebt_log_init+0x0/0x50 @ 1
[ 35.628007] initcall ebt_log_init+0x0/0x50 returned 0 after 0 usecs
[ 35.632007] calling ebt_nflog_init+0x0/0x39 @ 1
[ 35.636005] initcall ebt_nflog_init+0x0/0x39 returned 0 after 0 usecs
[ 35.640005] calling dsa_init_module+0x0/0x3b @ 1
[ 35.644007] initcall dsa_init_module+0x0/0x3b returned 0 after 0 usecs
[ 35.648005] calling mv88e6131_init+0x0/0x3b @ 1
[ 35.652028] initcall mv88e6131_init+0x0/0x3b returned 0 after 0 usecs
[ 35.656007] calling dsa_init_module+0x0/0x39 @ 1
[ 35.660261] initcall dsa_init_module+0x0/0x39 returned 0 after 0 usecs
[ 35.664042] calling x25_init+0x0/0x80 @ 1
[ 35.668006] NET: Registered protocol family 9
[ 35.672007] X.25 for Linux Version 0.2
[ 35.676042] initcall x25_init+0x0/0x80 returned 0 after 7812 usecs
[ 35.680007] calling nr_proto_init+0x0/0x26b @ 1
[ 35.689593] NET: Registered protocol family 6
[ 35.692115] initcall nr_proto_init+0x0/0x26b returned 0 after 7812 usecs
[ 35.696006] calling ax25_init+0x0/0xce @ 1
[ 35.700006] NET: Registered protocol family 3
[ 35.704039] initcall ax25_init+0x0/0xce returned 0 after 3906 usecs
[ 35.708004] calling can_init+0x0/0x144 @ 1
[ 35.712004] can: controller area network core (rev 20090105 abi 8)
[ 35.716474] NET: Registered protocol family 29
[ 35.720124] initcall can_init+0x0/0x144 returned 0 after 7812 usecs
[ 35.724005] calling raw_module_init+0x0/0x61 @ 1
[ 35.728006] can: raw protocol (rev 20090105)
[ 35.732029] initcall raw_module_init+0x0/0x61 returned 0 after 3906 usecs
[ 35.736006] calling l2cap_init+0x0/0x10a @ 1
[ 35.740027] Bluetooth: L2CAP ver 2.13
[ 35.744005] Bluetooth: L2CAP socket layer initialized
[ 35.748005] initcall l2cap_init+0x0/0x10a returned 0 after 7812 usecs
[ 35.752007] calling sco_init+0x0/0x110 @ 1
[ 35.756009] Bluetooth: SCO (Voice Link) ver 0.6
[ 35.760004] Bluetooth: SCO socket layer initialized
[ 35.764006] initcall sco_init+0x0/0x110 returned 0 after 7812 usecs
[ 35.768006] calling rfcomm_init+0x0/0xdf @ 1
[ 35.772092] Bluetooth: RFCOMM socket layer initialized
[ 35.776085] Bluetooth: RFCOMM TTY layer initialized
[ 35.780003] Bluetooth: RFCOMM ver 1.11
[ 35.784006] initcall rfcomm_init+0x0/0xdf returned 0 after 11718 usecs
[ 35.788005] calling cmtp_init+0x0/0x4e @ 1
[ 35.792004] Bluetooth: CMTP (CAPI Emulation) ver 1.0
[ 35.796006] initcall cmtp_init+0x0/0x4e returned 0 after 3906 usecs
[ 35.800008] calling hidp_init+0x0/0x81 @ 1
[ 35.804003] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 35.808358] initcall hidp_init+0x0/0x81 returned 0 after 3906 usecs
[ 35.812038] calling init_sunrpc+0x0/0x7e @ 1
[ 35.817334] RPC: Registered udp transport module.
[ 35.820044] RPC: Registered tcp transport module.
[ 35.824011] initcall init_sunrpc+0x0/0x7e returned 0 after 7812 usecs
[ 35.828005] calling init_rpcsec_gss+0x0/0x73 @ 1
[ 35.832101] initcall init_rpcsec_gss+0x0/0x73 returned 0 after 0 usecs
[ 35.836006] calling init_kerberos_module+0x0/0x55 @ 1
[ 35.840059] initcall init_kerberos_module+0x0/0x55 returned 0 after 0 usecs
[ 35.844005] calling init_spkm3_module+0x0/0x55 @ 1
[ 35.848024] initcall init_spkm3_module+0x0/0x55 returned 0 after 0 usecs
[ 35.852006] calling af_rxrpc_init+0x0/0x1c6 @ 1
[ 35.860367] NET: Registered protocol family 33
[ 35.864086] initcall af_rxrpc_init+0x0/0x1c6 returned 0 after 7812 usecs
[ 35.868005] calling rxkad_init+0x0/0x8e @ 1
[ 35.872292] RxRPC: Registered security type 2 'rxkad'
[ 35.876053] initcall rxkad_init+0x0/0x8e returned 0 after 3906 usecs
[ 35.880006] calling atm_clip_init+0x0/0xdb @ 1
[ 35.884417] initcall atm_clip_init+0x0/0xdb returned 0 after 0 usecs
[ 35.888043] calling lane_module_init+0x0/0x83 @ 1
[ 35.892015] lec.c: Jun 11 2009 13:33:53 initialized
[ 35.896008] initcall lane_module_init+0x0/0x83 returned 0 after 3906 usecs
[ 35.900006] calling atm_mpoa_init+0x0/0x60 @ 1
[ 35.904015] mpc.c: Jun 11 2009 13:33:51 initialized
[ 35.908006] initcall atm_mpoa_init+0x0/0x60 returned 0 after 3906 usecs
[ 35.912005] calling pppoatm_init+0x0/0x3b @ 1
[ 35.916006] initcall pppoatm_init+0x0/0x3b returned 0 after 0 usecs
[ 35.920007] calling decnet_init+0x0/0xb4 @ 1
[ 35.924003] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 35.929074] DECnet: Routing cache hash table of 1024 buckets, 56Kbytes
[ 35.932528] NET: Registered protocol family 12
[ 35.936111] initcall decnet_init+0x0/0xb4 returned 0 after 11718 usecs
[ 35.940005] calling phonet_init+0x0/0x9e @ 1
[ 35.944022] NET: Registered protocol family 35
[ 35.948412] initcall phonet_init+0x0/0x9e returned 0 after 3906 usecs
[ 35.956036] calling pep_register+0x0/0x3e @ 1
[ 35.960345] initcall pep_register+0x0/0x3e returned 0 after 0 usecs
[ 35.964058] calling vlan_proto_init+0x0/0xdb @ 1
[ 35.968006] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 35.972004] All bugs added by David S. Miller <davem@redhat.com>
[ 35.976071] initcall vlan_proto_init+0x0/0xdb returned 0 after 7812 usecs
[ 35.980006] calling sctp_init+0x0/0x749 @ 1
[ 35.989483] SCTP: Hash tables configured (established 21845 bind 18724)
[ 35.992612] initcall sctp_init+0x0/0x749 returned 0 after 7812 usecs
[ 35.996086] calling lib80211_init+0x0/0x45 @ 1
[ 36.000008] lib80211: common routines for IEEE802.11 drivers
[ 36.004075] lib80211_crypt: registered algorithm 'NULL'
[ 36.008007] initcall lib80211_init+0x0/0x45 returned 0 after 7812 usecs
[ 36.012007] calling tipc_init+0x0/0xdf @ 1
[ 36.016025] TIPC: Activated (version 1.6.4 compiled Jun 11 2009 13:34:00)
[ 36.021812] NET: Registered protocol family 30
[ 36.024053] TIPC: Started in single node mode
[ 36.028011] initcall tipc_init+0x0/0xdf returned 0 after 11718 usecs
[ 36.032007] calling dcbnl_init+0x0/0x59 @ 1
[ 36.036005] initcall dcbnl_init+0x0/0x59 returned 0 after 0 usecs
[ 36.040007] calling wimax_subsys_init+0x0/0x259 @ 1
[ 36.044108] initcall wimax_subsys_init+0x0/0x259 returned 0 after 0 usecs
[ 36.048008] calling severities_debugfs_init+0x0/0x83 @ 1
[ 36.052077] initcall severities_debugfs_init+0x0/0x83 returned 0 after 0 usecs
[ 36.056007] calling cpufreq_p4_init+0x0/0x7a @ 1
[ 36.060005] initcall cpufreq_p4_init+0x0/0x7a returned -19 after 0 usecs
[ 36.064007] calling update_mp_table+0x0/0x245 @ 1
[ 36.068005] initcall update_mp_table+0x0/0x245 returned 0 after 0 usecs
[ 36.072007] calling lapic_insert_resource+0x0/0x67 @ 1
[ 36.076009] initcall lapic_insert_resource+0x0/0x67 returned 0 after 0 usecs
[ 36.080006] calling ioapic_insert_resources+0x0/0x82 @ 1
[ 36.084005] initcall ioapic_insert_resources+0x0/0x82 returned 0 after 0 usecs
[ 36.088008] calling io_apic_bug_finalize+0x0/0x42 @ 1
[ 36.092007] initcall io_apic_bug_finalize+0x0/0x42 returned 0 after 0 usecs
[ 36.096006] calling check_early_ioremap_leak+0x0/0x8e @ 1
[ 36.100081] initcall check_early_ioremap_leak+0x0/0x8e returned 0 after 0 usecs
[ 36.104009] calling init_oops_id+0x0/0x5d @ 1
[ 36.108005] initcall init_oops_id+0x0/0x5d returned 0 after 0 usecs
[ 36.112028] calling disable_boot_consoles+0x0/0x5f @ 1
[ 36.116008] initcall disable_boot_consoles+0x0/0x5f returned 0 after 0 usecs
[ 36.120006] calling pm_qos_power_init+0x0/0xf0 @ 1
[ 36.125231] initcall pm_qos_power_init+0x0/0xf0 returned 0 after 0 usecs
[ 36.128083] calling clear_boot_tracer+0x0/0x52 @ 1
[ 36.132007] initcall clear_boot_tracer+0x0/0x52 returned 0 after 0 usecs
[ 36.136008] calling event_trace_self_tests_init+0x0/0x5f @ 1
[ 36.140003] Running tests on trace events:
[ 36.144004] Testing event kfree_skb: <6>Time: 9948000 (usecs)
[ 36.152096] Overruns: 36779670
[ 36.156007] Read: 0 (by pages)
[ 36.160006] Entries: 62811
[ 36.162907] Total: 36842481
[ 36.164003] Missed: 0
[ 36.168004] Hit: 36842481
[ 36.172005] Entries per millisec: 3703
[ 36.175861] 270 ns per entry
[ 36.176004] Sleeping for 10 secs
[ 36.180141] OK
[ 36.184026] Testing event block_rq_abort: OK
[ 36.196571] Testing event block_rq_insert: OK
[ 36.208572] Testing event block_rq_issue: OK
[ 36.220565] Testing event block_rq_requeue: OK
[ 36.232574] Testing event block_rq_complete: OK
[ 36.244567] Testing event block_bio_bounce: OK
[ 36.256566] Testing event block_bio_complete: OK
[ 36.268567] Testing event block_bio_backmerge: OK
[ 36.280568] Testing event block_bio_frontmerge: OK
[ 36.292568] Testing event block_bio_queue: OK
[ 36.304570] Testing event block_getrq: OK
[ 36.316571] Testing event block_sleeprq: OK
[ 36.328572] Testing event block_plug: OK
[ 36.340573] Testing event block_unplug_timer: OK
[ 36.352572] Testing event block_unplug_io: OK
[ 36.364573] Testing event block_split: OK
[ 36.376574] Testing event block_remap: OK
[ 36.388567] Testing event kmalloc: OK
[ 36.402629] Testing event kmem_cache_alloc: OK
[ 36.412568] Testing event kmalloc_node: OK
[ 36.424570] Testing event kmem_cache_alloc_node: OK
[ 36.436571] Testing event kfree: OK
[ 36.444594] Testing event kmem_cache_free: OK
[ 36.456569] Testing event lock_acquire: OK
[ 36.468595] Testing event lock_release: OK
[ 36.480604] Testing event workqueue_insertion: OK
[ 36.492571] Testing event workqueue_execution: OK
[ 36.504571] Testing event workqueue_creation: OK
[ 36.516565] Testing event workqueue_destruction: OK
[ 36.528574] Testing event irq_handler_entry: OK
[ 36.540565] Testing event irq_handler_exit: OK
[ 36.552566] Testing event softirq_entry: OK
[ 36.564568] Testing event softirq_exit: OK
[ 36.576568] Testing event sched_kthread_stop: OK
[ 36.588569] Testing event sched_kthread_stop_ret: OK
[ 36.600569] Testing event sched_wait_task: OK
[ 36.612571] Testing event sched_wakeup: OK
[ 36.624572] Testing event sched_wakeup_new: OK
[ 36.636572] Testing event sched_switch: OK
[ 36.648572] Testing event sched_migrate_task: OK
[ 36.660565] Testing event sched_process_free: OK
[ 36.672575] Testing event sched_process_exit: OK
[ 36.684567] Testing event sched_process_wait: OK
[ 36.696567] Testing event sched_process_fork: OK
[ 36.708569] Testing event sched_signal_send: OK
[ 36.720568] Running tests on trace event systems:
[ 36.724010] Testing event system skb: OK
[ 36.736573] Testing event system block: OK
[ 36.748773] Testing event system kmem: OK
[ 36.760636] Testing event system lockdep: OK
[ 36.772633] Testing event system workqueue: OK
[ 36.784610] Testing event system irq: OK
[ 36.796612] Testing event system sched: OK
[ 36.808717] Running tests on all trace events:
[ 36.812009] Testing all events: OK
[ 36.825345] Running tests again, along with the function tracer
[ 36.828031] Running tests on trace events:
[ 36.832018] Testing event kfree_skb: OK
[ 36.844844] Testing event block_rq_abort: OK
[ 36.856879] Testing event block_rq_insert: OK
[ 36.868845] Testing event block_rq_issue: OK
[ 36.880846] Testing event block_rq_requeue: OK
[ 36.892848] Testing event block_rq_complete: OK
[ 36.904849] Testing event block_bio_bounce: OK
[ 36.916840] Testing event block_bio_complete: OK
[ 36.928852] Testing event block_bio_backmerge: OK
[ 36.940842] Testing event block_bio_frontmerge: OK
[ 36.952852] Testing event block_bio_queue: OK
[ 36.964845] Testing event block_getrq: OK
[ 36.976846] Testing event block_sleeprq: OK
[ 36.988845] Testing event block_plug: OK
[ 37.000855] Testing event block_unplug_timer: OK
[ 37.012849] Testing event block_unplug_io: OK
[ 37.024849] Testing event block_split: OK
[ 37.036840] Testing event block_remap: OK
[ 37.048851] Testing event kmalloc: OK
[ 37.060842] Testing event kmem_cache_alloc: OK
[ 37.072851] Testing event kmalloc_node: OK
[ 37.084842] Testing event kmem_cache_alloc_node: OK
[ 37.096843] Testing event kfree: OK
[ 37.108846] Testing event kmem_cache_free: OK
[ 37.120846] Testing event lock_acquire: OK
[ 37.132871] Testing event lock_release: OK
[ 37.144872] Testing event workqueue_insertion: OK
[ 37.156849] Testing event workqueue_execution: OK
[ 37.168848] Testing event workqueue_creation: OK
[ 37.180849] Testing event workqueue_destruction: OK
[ 37.192850] Testing event irq_handler_entry: OK
[ 37.204842] Testing event irq_handler_exit: OK
[ 37.216843] Testing event softirq_entry: OK
[ 37.228846] Testing event softirq_exit: OK
[ 37.240844] Testing event sched_kthread_stop: OK
[ 37.252846] Testing event sched_kthread_stop_ret: OK
[ 37.264847] Testing event sched_wait_task: OK
[ 37.276839] Testing event sched_wakeup: OK
[ 37.288858] Testing event sched_wakeup_new: OK
[ 37.300851] Testing event sched_switch: OK
[ 37.312850] Testing event sched_migrate_task: OK
[ 37.324843] Testing event sched_process_free: OK
[ 37.336843] Testing event sched_process_exit: OK
[ 37.348843] Testing event sched_process_wait: OK
[ 37.360844] Testing event sched_process_fork: OK
[ 37.372845] Testing event sched_signal_send: OK
[ 37.384845] Running tests on trace event systems:
[ 37.388033] Testing event system skb: OK
[ 37.400850] Testing event system block: OK
[ 37.413605] Testing event system kmem: OK
[ 37.425093] Testing event system lockdep: OK
[ 37.436937] Testing event system workqueue: OK
[ 37.449011] Testing event system irq: OK
[ 37.460992] Testing event system sched: OK
[ 37.473382] Running tests on all trace events:
[ 37.476031] Testing all events: OK
[ 37.491181] initcall event_trace_self_tests_init+0x0/0x5f returned 0 after 1316406 usecs
[ 37.492016] calling afs_init+0x0/0x1ce @ 1
[ 37.496005] kAFS: Red Hat AFS client v0.1 registering.
[ 37.501104] initcall afs_init+0x0/0x1ce returned 0 after 3906 usecs
[ 37.504138] calling random32_reseed+0x0/0x80 @ 1
[ 37.508012] initcall random32_reseed+0x0/0x80 returned 0 after 0 usecs
[ 37.512006] calling pci_resource_alignment_sysfs_init+0x0/0x40 @ 1
[ 37.516014] initcall pci_resource_alignment_sysfs_init+0x0/0x40 returned 0 after 0 usecs
[ 37.520006] calling pci_sysfs_init+0x0/0x77 @ 1
[ 37.524467] initcall pci_sysfs_init+0x0/0x77 returned 0 after 0 usecs
[ 37.528008] calling regulator_init_complete+0x0/0x166 @ 1
[ 37.532033] initcall regulator_init_complete+0x0/0x166 returned 0 after 0 usecs
[ 37.536006] calling seqgen_init+0x0/0x36 @ 1
[ 37.540021] initcall seqgen_init+0x0/0x36 returned 0 after 0 usecs
[ 37.544006] calling hd_init+0x0/0x321 @ 1
[ 37.548055] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[ 37.552144] initcall hd_init+0x0/0x321 returned -1 after 3906 usecs
[ 37.556005] initcall hd_init+0x0/0x321 returned with error code -1
[ 37.560008] calling scsi_complete_async_scans+0x0/0x167 @ 1
[ 37.564007] initcall scsi_complete_async_scans+0x0/0x167 returned 0 after 0 usecs
[ 37.568007] calling init_net_drop_monitor+0x0/0x140 @ 1
[ 37.572005] Initalizing network drop monitor service
[ 37.576074] initcall init_net_drop_monitor+0x0/0x140 returned 0 after 3906 usecs
[ 37.580005] calling tcp_congestion_default+0x0/0x39 @ 1
[ 37.584008] initcall tcp_congestion_default+0x0/0x39 returned 0 after 0 usecs
[ 37.588006] calling initialize_hashrnd+0x0/0x40 @ 1
[ 37.592011] initcall initialize_hashrnd+0x0/0x40 returned 0 after 0 usecs
[ 37.596051] async_waiting @ 1
[ 37.600027] async_continuing @ 1 after 0 usec
[ 37.610624] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 37.612041] EXT3-fs: write access will be enabled during recovery.
[ 37.662537] kjournald starting. Commit interval 5 seconds
[ 37.664084] EXT3-fs: recovery complete.
[ 37.668953] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.672176] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 37.676105] async_waiting @ 1
[ 37.680006] async_continuing @ 1 after 0 usec
[ 37.684130] Freeing unused kernel memory: 648k freed
[ 46.180494] Starting ring buffer hammer
[ 56.000271] End ring buffer hammer
[ 56.004254] Time: 9816000 (usecs)
[ 56.008010] Overruns: 7676520
[ 56.011132] Read: 8056026 (by events)
[ 56.012005] Entries: 62852
[ 56.016004] Total: 15795398
[ 56.020004] Missed: 0
[ 56.024004] Hit: 15795398
[ 56.027168] Entries per millisec: 1609
[ 56.028003] 621 ns per entry
[ 56.032005] Sleeping for 10 secs
[ 66.036252] Starting ring buffer hammer
[ 66.783931] usb usb2: uevent
[ 66.784735] usb 2-0:1.0: uevent
[ 66.820144] usb usb3: uevent
[ 66.823460] usb 3-0:1.0: uevent
[ 66.848523] usb usb4: uevent
[ 66.878242] usb 4-0:1.0: uevent
[ 66.896540] usb usb5: uevent
[ 66.916169] usb 5-0:1.0: uevent
[ 66.932190] usb usb1: uevent
[ 66.956186] usb 1-0:1.0: uevent
[ 76.000118] End ring buffer hammer
[ 76.003646] Time: 9964000 (usecs)
[ 76.004007] Overruns: 0
[ 76.008006] Read: 15639150 (by pages)
[ 76.012007] Entries: 302
[ 76.016005] Total: 15639452
[ 76.020003] Missed: 0
[ 76.022561] Hit: 15639452
[ 76.024006] Entries per millisec: 1569
[ 76.028003] 637 ns per entry
[ 76.032005] Sleeping for 10 secs
[ 86.036029] Starting ring buffer hammer
[ 96.001126] End ring buffer hammer
[ 96.004018] Time: 9964000 (usecs)
[ 96.008007] Overruns: 8548109
[ 96.011082] Read: 9187637 (by events)
[ 96.012004] Entries: 1
[ 96.016005] Total: 17735747
[ 96.020003] Missed: 0
[ 96.024004] Hit: 17735747
[ 96.027167] Entries per millisec: 1779
[ 96.028004] 562 ns per entry
[ 96.032004] Sleeping for 10 secs
[ 106.036019] Starting ring buffer hammer
[ 116.000011] End ring buffer hammer
[ 116.003540] Time: 9964000 (usecs)
[ 116.004003] Overruns: 0
[ 116.008007] Read: 29590710 (by pages)
[ 116.012004] Entries: 92
[ 116.016004] Total: 29590802
[ 116.019169] Missed: 0
[ 116.020004] Hit: 29590802
[ 116.024004] Entries per millisec: 2969
[ 116.028003] 336 ns per entry
[ 116.032005] Sleeping for 10 secs
next prev parent reply other threads:[~2009-06-11 11:41 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-10 20:12 [GIT PULL] Early boot SLAB for 2.6.31 Pekka J Enberg
2009-06-10 20:32 ` Linus Torvalds
2009-06-10 20:30 ` Pekka Enberg
2009-06-10 20:43 ` Ingo Molnar
2009-06-10 20:47 ` Pekka Enberg
2009-06-10 20:50 ` Ingo Molnar
2009-06-10 20:57 ` Ingo Molnar
2009-06-10 20:58 ` Pekka Enberg
2009-06-10 21:07 ` Pekka Enberg
2009-06-11 0:54 ` Ingo Molnar
2009-06-10 21:00 ` Pekka J Enberg
2009-06-10 20:33 ` Linus Torvalds
2009-06-10 20:57 ` Pekka J Enberg
2009-06-11 11:17 ` [GIT PULL v2] " Pekka J Enberg
2009-06-11 11:35 ` Ingo Molnar
2009-06-11 11:40 ` Ingo Molnar [this message]
2009-06-11 11:42 ` Ingo Molnar
2009-06-11 11:48 ` Ingo Molnar
2009-06-11 11:56 ` Pekka Enberg
2009-06-11 11:49 ` Pekka J Enberg
2009-06-11 11:54 ` Ingo Molnar
2009-06-11 13:58 ` Christoph Lameter
2009-06-11 14:06 ` Pekka Enberg
2009-06-11 14:26 ` Christoph Lameter
2009-06-11 15:24 ` Pekka Enberg
2009-06-11 17:50 ` Yinghai Lu
2009-06-11 18:10 ` [GIT PULL v3] " Pekka J Enberg
2009-06-11 21:43 ` Ingo Molnar
2009-06-11 22:03 ` Ingo Molnar
2009-06-11 22:41 ` Yinghai Lu
2009-06-12 8:33 ` Pekka Enberg
2009-06-12 7:17 ` Ingo Molnar
2009-06-12 7:25 ` Li Zefan
2009-06-12 7:29 ` Pekka Enberg
2009-06-12 7:29 ` KAMEZAWA Hiroyuki
2009-06-12 7:33 ` Li Zefan
2009-06-12 7:51 ` Ingo Molnar
2009-06-11 23:14 ` Yinghai Lu
2009-06-12 8:37 ` Pekka Enberg
2009-06-10 21:00 ` [GIT PULL] " Ingo Molnar
2009-06-10 20:57 ` Pekka Enberg
2009-06-10 21:03 ` Yinghai Lu
2009-06-10 21:11 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090611114032.GA8856@elte.hu \
--to=mingo@elte.hu \
--cc=akpm@linux-foundation.org \
--cc=cl@linux-foundation.org \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mpm@selenic.com \
--cc=npiggin@suse.de \
--cc=penberg@cs.helsinki.fi \
--cc=torvalds@linux-foundation.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.