From: Pavel Machek <pavel@ucw.cz>
To: Niel Lambrechts <niel.lambrechts@gmail.com>
Cc: Tejun Heo <htejun@gmail.com>, Alan Cox <alan@lxorguk.ukuu.org.uk>,
"linux.kernel" <linux-kernel@vger.kernel.org>,
Theodore Tso <tytso@mit.edu>
Subject: Re: 2.6.29 regression: ATA bus errors on resume
Date: Fri, 19 Jun 2009 17:04:42 +0200 [thread overview]
Message-ID: <20090619150051.GD1389@ucw.cz> (raw)
In-Reply-To: <4A2A1521.5020407@gmail.com>
On Sat 2009-06-06 09:05:05, Niel Lambrechts wrote:
> Morning Tejun,
>
> Tejun Heo wrote:
> > Hello,
> >
> > Can you please do the followings?
> >
> > 1. Apply the attached patch, build & boot
> >
> I chose 2.6.30-rc7...
> > 2. Trigger the problem and record dmesg
> >
> It took 3 days and quite a few hibernate attempts ... :-)
>
> > 3. On failed IO, the kernel will print the address of bi_endio. Run
> > "nm -n" on the vmlinux in the kernel build root and look up which
> > function it is and post the dmesg and function name.
> I did not have that specific vmlinux.o file any more, but
> /boot/System.map-2.6.30-rc7-pae shows:
> c01a49fd t end_bio_bh_io_sync
>
> Hope this is sufficient to help you. Sorry if this is silly - being so
> inexperienced with the kernel - but I wondered if or why a dump_stack()
> in that debug patch would not be helpful?
I guess dump_stack would be very helpful :-).
> Regards,
> Niel
>
>
> Jun 5 09:26:12 linux-7vph -- MARK --
> Jun 5 09:26:12 linux-7vph syslog-ng[24615]: Log statistics; dropped='pipe(/dev/xconsole)=0', dropped='pipe(/dev/tty10)=0', processed='center(queued)=3777', processed='center(received)=3142', processed='destination(newsnotice)=0', processed='destination(acpid)=13', processed='destination(firewall)=18', processed='destination(null)=208', processed='destination(mail)=0', processed='destination(mailinfo)=0', processed='destination(console)=200', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(messages)=1909', processed='destination(mailwarn)=0', processed='destination(localmessages)=0', processed='destination(netmgm)=994', processed='destination(mailerr)=0', processed='destination(xconsole)=200', processed='destination(warn)=235', processed='source(src)=3142'
> Jun 5 09:26:11 linux-7vph kernel: Syncing filesystems ... done.
> Jun 5 09:26:12 linux-7vph kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
> Jun 5 09:26:12 linux-7vph kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> Jun 5 09:26:12 linux-7vph kernel: PM: Shrinking memory... done (149507 pages freed)
> Jun 5 09:26:12 linux-7vph kernel: PM: Freed 598028 kbytes in 6.49 seconds (92.14 MB/s)
> Jun 5 09:26:12 linux-7vph kernel: Suspending console(s) (use no_console_suspend to debug)
> Jun 5 09:26:12 linux-7vph kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
> Jun 5 09:26:12 linux-7vph kernel: ACPI handle has no context!
> Jun 5 09:26:12 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
> Jun 5 09:26:12 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
> Jun 5 09:26:12 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
> Jun 5 09:26:12 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
> Jun 5 09:26:12 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
> Jun 5 09:26:12 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B disabled
> Jun 5 09:26:12 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
> Jun 5 09:26:12 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
> Jun 5 09:26:12 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C disabled
> Jun 5 09:26:12 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
> Jun 5 09:26:12 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
> Jun 5 09:26:13 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A disabled
> Jun 5 09:26:13 linux-7vph kernel: e1000e 0000:00:19.0: PME# enabled
> Jun 5 09:26:13 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability enabled by ACPI
> Jun 5 09:26:13 linux-7vph kernel: ACPI: Preparing to enter system sleep state S4
> Jun 5 09:26:13 linux-7vph kernel: PM: Saving platform NVS memory
> Jun 5 09:26:13 linux-7vph kernel: Disabling non-boot CPUs ...
> Jun 5 09:26:13 linux-7vph kernel: CPU 1 is now offline
> Jun 5 09:26:13 linux-7vph kernel: SMP alternatives: switching to UP code
> Jun 5 09:26:13 linux-7vph kernel: CPU0 attaching NULL sched-domain.
> Jun 5 09:26:13 linux-7vph kernel: CPU1 attaching NULL sched-domain.
> Jun 5 09:26:13 linux-7vph kernel: CPU0 attaching NULL sched-domain.
> Jun 5 09:26:13 linux-7vph kernel: CPU1 is down
> Jun 5 09:26:13 linux-7vph kernel: Extended CMOS year: 2000
> Jun 5 09:26:13 linux-7vph kernel: PM: Creating hibernation image:
> Jun 5 09:26:13 linux-7vph kernel: PM: Need to copy 223773 pages
> Jun 5 09:26:13 linux-7vph kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Jun 5 09:26:13 linux-7vph kernel: Intel machine check architecture supported.
> Jun 5 09:26:13 linux-7vph kernel: Intel machine check reporting enabled on CPU#0.
> Jun 5 09:26:13 linux-7vph kernel: PM: Restoring platform NVS memory
> Jun 5 09:26:13 linux-7vph kernel: Extended CMOS year: 2000
> Jun 5 09:26:13 linux-7vph kernel: Enabling non-boot CPUs ...
> Jun 5 09:26:13 linux-7vph kernel: SMP alternatives: switching to SMP code
> Jun 5 09:26:13 linux-7vph kernel: Booting processor 1 APIC 0x1 ip 0x6000
> Jun 5 09:26:13 linux-7vph kernel: Initializing CPU#1
> Jun 5 09:26:13 linux-7vph kernel: Calibrating delay using timer specific routine.. 5134.67 BogoMIPS (lpj=10269343)
> Jun 5 09:26:13 linux-7vph kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
> Jun 5 09:26:13 linux-7vph kernel: CPU: L2 cache: 6144K
> Jun 5 09:26:13 linux-7vph kernel: CPU: Physical Processor ID: 0
> Jun 5 09:26:13 linux-7vph kernel: CPU: Processor Core ID: 1
> Jun 5 09:26:13 linux-7vph kernel: Intel machine check architecture supported.
> Jun 5 09:26:13 linux-7vph kernel: Intel machine check reporting enabled on CPU#1.
> Jun 5 09:26:13 linux-7vph kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> Jun 5 09:26:13 linux-7vph kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
> Jun 5 09:26:13 linux-7vph kernel: CPU0 attaching NULL sched-domain.
> Jun 5 09:26:13 linux-7vph kernel: Switched to high resolution mode on CPU 1
> Jun 5 09:26:13 linux-7vph kernel: CPU0 attaching sched-domain:
> Jun 5 09:26:13 linux-7vph kernel: domain 0: span 0-1 level MC
> Jun 5 09:26:13 linux-7vph kernel: groups: 0 1
> Jun 5 09:26:13 linux-7vph kernel: domain 1: span 0-1 level CPU
> Jun 5 09:26:13 linux-7vph kernel: groups: 0-1 (__cpu_power = 2048)
> Jun 5 09:26:13 linux-7vph kernel: CPU1 attaching sched-domain:
> Jun 5 09:26:13 linux-7vph kernel: domain 0: span 0-1 level MC
> Jun 5 09:26:13 linux-7vph kernel: groups: 1 0
> Jun 5 09:26:13 linux-7vph kernel: domain 1: span 0-1 level CPU
> Jun 5 09:26:13 linux-7vph kernel: groups: 0-1 (__cpu_power = 2048)
> Jun 5 09:26:13 linux-7vph kernel: microcode: failed to init CPU1
> Jun 5 09:26:13 linux-7vph kernel: CPU1 is up
> Jun 5 09:26:13 linux-7vph kernel: ACPI: Waking up from system sleep state S4
> Jun 5 09:26:13 linux-7vph kernel: pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
> Jun 5 09:26:13 linux-7vph kernel: uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
> Jun 5 09:26:13 linux-7vph kernel: uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
> Jun 5 09:26:13 linux-7vph kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
> Jun 5 09:26:13 linux-7vph kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
> Jun 5 09:26:13 linux-7vph kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
> Jun 5 09:26:13 linux-7vph kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
> Jun 5 09:26:13 linux-7vph kernel: pci 0000:00:02.0: PME# disabled
> Jun 5 09:26:13 linux-7vph kernel: pci 0000:00:02.0: setting latency timer to 64
> Jun 5 09:26:13 linux-7vph kernel: pci 0000:00:02.1: PME# disabled
> Jun 5 09:26:13 linux-7vph kernel: pci 0000:00:03.0: PME# disabled
> Jun 5 09:26:13 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> Jun 5 09:26:13 linux-7vph kernel: e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
> Jun 5 09:26:13 linux-7vph kernel: e1000e 0000:00:19.0: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability disabled by ACPI
> Jun 5 09:26:14 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability disabled by ACPI
> Jun 5 09:26:14 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
> Jun 5 09:26:14 linux-7vph kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> Jun 5 09:26:14 linux-7vph kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> Jun 5 09:26:14 linux-7vph kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> Jun 5 09:26:14 linux-7vph kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: pci 0000:00:1e.0: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: ahci 0000:00:1f.2: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> Jun 5 09:26:14 linux-7vph kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4]
> Jun 5 09:26:14 linux-7vph kernel: pci 0000:15:00.2: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: pci 0000:15:00.3: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: pci 0000:15:00.4: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: pci 0000:15:00.5: PME# disabled
> Jun 5 09:26:14 linux-7vph kernel: sd 0:0:0:0: [sda] Starting disk
> Jun 5 09:26:14 linux-7vph kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> Jun 5 09:26:14 linux-7vph kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: configured for UDMA/133
> Jun 5 09:26:14 linux-7vph kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
> Jun 5 09:26:14 linux-7vph kernel: ata1: irq_stat 0x00400040, connection status changed
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: configured for UDMA/133
> Jun 5 09:26:14 linux-7vph kernel: ata1: EH complete
> Jun 5 09:26:14 linux-7vph kernel: pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900407, writing 0x900403)
> Jun 5 09:26:14 linux-7vph kernel: pci 0000:00:02.0: setting latency timer to 64
> Jun 5 09:26:14 linux-7vph kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
> Jun 5 09:26:14 linux-7vph kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
> Jun 5 09:26:14 linux-7vph kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
> Jun 5 09:26:14 linux-7vph kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
> Jun 5 09:26:14 linux-7vph kernel: ata2.00: configured for UDMA/133
> Jun 5 09:26:14 linux-7vph kernel: Restarting tasks ... <3>ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
> Jun 5 09:26:14 linux-7vph kernel: ata2: irq_stat 0x40000001
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: exception Emask 0x10 SAct 0x1ff SErr 0x50000 action 0xe frozen
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: irq_stat 0x00400008, PHY RDY changed
> Jun 5 09:26:14 linux-7vph kernel: ata1: SError: { PHYRdyChg CommWake }
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: cmd 60/08:00:5f:06:44/00:00:0c:00:00/40 tag 0 ncq 4096 in
> Jun 5 09:26:14 linux-7vph kernel: res 50/00:28:3f:8a:6f/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: status: { DRDY }
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: cmd 60/58:08:6f:06:44/00:00:0c:00:00/40 tag 1 ncq 45056 in
> Jun 5 09:26:14 linux-7vph kernel: res 50/00:28:3f:8a:6f/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: status: { DRDY }
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: cmd 60/08:10:d7:06:44/00:00:0c:00:00/40 tag 2 ncq 4096 in
> Jun 5 09:26:14 linux-7vph kernel: res 50/00:28:3f:8a:6f/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: status: { DRDY }
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: cmd 60/08:18:07:07:44/00:00:0c:00:00/40 tag 3 ncq 4096 in
> Jun 5 09:26:14 linux-7vph kernel: res 50/00:28:3f:8a:6f/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: status: { DRDY }
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: cmd 60/18:20:17:07:44/00:00:0c:00:00/40 tag 4 ncq 12288 in
> Jun 5 09:26:14 linux-7vph kernel: res 50/00:28:3f:8a:6f/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: status: { DRDY }
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: cmd 60/08:28:67:88:70/00:00:0e:00:00/40 tag 5 ncq 4096 in
> Jun 5 09:26:14 linux-7vph kernel: res 50/00:28:3f:8a:6f/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: status: { DRDY }
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: cmd 60/08:30:17:70:14/00:00:0d:00:00/40 tag 6 ncq 4096 in
> Jun 5 09:26:14 linux-7vph kernel: res 50/00:28:3f:8a:6f/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: status: { DRDY }
> Jun 5 09:26:14 linux-7vph kernel: ata1.00: cmd 60/d8:38:5f:89:6f/00:00:0e:00:00/40 tag 7 ncq 110592 in
> Jun 5 09:26:15 linux-7vph kernel: res 50/00:28:3f:8a:6f/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
> Jun 5 09:26:15 linux-7vph kernel: ata1.00: status: { DRDY }
> Jun 5 09:26:15 linux-7vph kernel: ata1.00: cmd 60/28:40:3f:8a:6f/00:00:0e:00:00/40 tag 8 ncq 20480 in
> Jun 5 09:26:15 linux-7vph kernel: res 50/00:28:3f:8a:6f/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
> Jun 5 09:26:15 linux-7vph kernel: ata1.00: status: { DRDY }
> Jun 5 09:26:15 linux-7vph kernel: ata1: hard resetting link
> Jun 5 09:26:15 linux-7vph kernel: ata2.00: configured for UDMA/133
> Jun 5 09:26:15 linux-7vph kernel: ata2: EH complete
> Jun 5 09:26:15 linux-7vph kernel: done.
> Jun 5 09:26:15 linux-7vph kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: configured for UDMA/133
> Jun 5 09:26:16 linux-7vph kernel: ata1.00: configured for UDMA/133
> Jun 5 09:26:16 linux-7vph kernel: sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Jun 5 09:26:16 linux-7vph kernel: sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
> Jun 5 09:26:16 linux-7vph kernel: Descriptor sense data with sense descriptors (in hex):
> Jun 5 09:26:16 linux-7vph kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
> Jun 5 09:26:16 linux-7vph kernel: 0e 6f 8a 3f
> Jun 5 09:26:16 linux-7vph kernel: sd 0:0:0:0: [sda] Add. Sense: No additional sense information
> Jun 5 09:26:16 linux-7vph kernel: end_request: I/O error, dev sda, sector 242190687
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio e1223140 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=e1223140 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa0c0 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa0c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa140 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa140 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa1c0 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa1c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa240 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa240 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa2c0 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa2c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa340 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa340 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa3c0 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa3c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa440 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa440 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa4c0 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa4c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa540 with -5
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: bio=f5caa540 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:16 linux-7vph kernel: XXX sda: failing bio f5caa5c0 with -5
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: bio=f5caa5c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: failing bio f5caa640 with -5
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: bio=f5caa640 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: failing bio f5caa6c0 with -5
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: bio=f5caa6c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: failing bio f5caa740 with -5
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: bio=f5caa740 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: failing bio f5caa7c0 with -5
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: bio=f5caa7c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:19 linux-7vph kernel: XXX sda: failing bio f5caa840 with -5
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: bio=f5caa840 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: failing bio f5caa8c0 with -5
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: bio=f5caa8c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: failing bio f5caa940 with -5
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: bio=f5caa940 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: failing bio f5caa9c0 with -5
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: bio=f5caa9c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: failing bio f5caaa40 with -5
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: bio=f5caaa40 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:21 linux-7vph kernel: XXX sda: failing bio f5caaac0 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caaac0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio f5caab40 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caab40 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio f5caabc0 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caabc0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio f5caac40 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caac40 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio f5caacc0 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caacc0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio f5caad40 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caad40 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Jun 5 09:26:22 linux-7vph kernel: sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
> Jun 5 09:26:22 linux-7vph kernel: Descriptor sense data with sense descriptors (in hex):
> Jun 5 09:26:22 linux-7vph kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
> Jun 5 09:26:22 linux-7vph kernel: 0e 6f 8a 3f
> Jun 5 09:26:22 linux-7vph kernel: sd 0:0:0:0: [sda] Add. Sense: No additional sense information
> Jun 5 09:26:22 linux-7vph kernel: end_request: I/O error, dev sda, sector 242190911
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio f5caadc0 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caadc0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio f5caae40 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caae40 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio f5caaec0 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caaec0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio f5caaf40 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=f5caaf40 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: failing bio e12230c0 with -5
> Jun 5 09:26:22 linux-7vph kernel: XXX sda: bio=e12230c0 error=-5 bi_end_io=c01a49fd
> Jun 5 09:26:22 linux-7vph kernel: ata1: EH complete
> Jun 5 09:26:22 linux-7vph kernel: EXT4-fs error (device sda6): __ext4_get_inode_loc: unable to read inode block - inode=2346994, block=9404448
> Jun 5 09:26:22 linux-7vph kernel: EXT4-fs error (device sda6) in ext4_reserve_inode_write: IO failure
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2009-06-19 15:05 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <clqON-2Xv-7@gated-at.bofh.it>
[not found] ` <clqON-2Xv-9@gated-at.bofh.it>
[not found] ` <clqON-2Xv-11@gated-at.bofh.it>
[not found] ` <clqON-2Xv-13@gated-at.bofh.it>
[not found] ` <clqON-2Xv-15@gated-at.bofh.it>
[not found] ` <clqON-2Xv-17@gated-at.bofh.it>
[not found] ` <clqON-2Xv-19@gated-at.bofh.it>
[not found] ` <clqON-2Xv-5@gated-at.bofh.it>
[not found] ` <clqYt-3bu-5@gated-at.bofh.it>
2009-03-30 18:24 ` 2.6.29 regression: ATA bus errors on resume Niel Lambrechts
2009-03-30 19:17 ` Jeff Garzik
[not found] ` <cmknZ-8lW-9@gated-at.bofh.it>
[not found] ` <cmoBl-6Ok-21@gated-at.bofh.it>
[not found] ` <cmp4n-7rb-15@gated-at.bofh.it>
[not found] ` <cmsYg-5BR-27@gated-at.bofh.it>
[not found] ` <cmvW7-1Yj-23@gated-at.bofh.it>
[not found] ` <cnheh-3vO-7@gated-at.bofh.it>
[not found] ` <cnPg1-7Q4-19@gated-at.bofh.it>
[not found] ` <cnTWo-7bV-25@gated-at.bofh.it>
[not found] ` <co1Kd-350-5@gated-at.bofh.it>
[not found] ` <co2Qf-4QQ-27@gated-at.bofh.it>
[not found] ` <co4yj-7Mc-5@gated-at.bofh.it>
[not found] ` <cp71c-4py-29@gated-at.bofh.it>
[not found] ` <cEVyE-re-1@gated-at.bofh.it>
2009-05-23 9:36 ` Niel Lambrechts
2009-05-25 1:10 ` Tejun Heo
2009-05-25 8:15 ` Alan Cox
2009-05-25 22:06 ` Niel Lambrechts
2009-05-26 4:58 ` Tejun Heo
2009-05-26 5:43 ` Niel Lambrechts
2009-05-26 5:50 ` Tejun Heo
2009-05-26 6:13 ` Niel Lambrechts
2009-05-26 13:33 ` Tejun Heo
2009-05-26 18:14 ` Niel Lambrechts
2009-05-27 0:07 ` Tejun Heo
2009-05-27 14:01 ` Niel Lambrechts
2009-06-01 18:57 ` Niel Lambrechts
2009-06-03 3:14 ` Tejun Heo
2009-06-03 4:28 ` Tejun Heo
2009-06-06 7:05 ` Niel Lambrechts
2009-06-19 15:04 ` Pavel Machek [this message]
2009-06-25 12:57 ` Tejun Heo
2009-06-25 15:25 ` Niel Lambrechts
2009-06-26 0:46 ` Tejun Heo
2009-06-26 6:24 ` Niel Lambrechts
2009-09-18 20:26 ` Berthold Gunreben
2009-09-25 4:11 ` Tejun Heo
2009-09-30 9:58 ` Berthold Gunreben
2009-09-30 10:26 ` Tejun Heo
2009-05-26 4:58 ` Tejun Heo
[not found] <ckpL0-3TE-3@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-5@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-7@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-9@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-11@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-1@gated-at.bofh.it>
[not found] ` <cllvN-2Gf-1@gated-at.bofh.it>
2009-03-30 14:30 ` Niel Lambrechts
2009-03-30 14:40 ` Jeff Garzik
2009-04-01 19:48 ` Niel Lambrechts
2009-04-03 20:09 ` Jeff Garzik
2009-04-03 20:54 ` Niel Lambrechts
2009-04-02 1:50 ` Tejun Heo
2009-04-02 6:20 ` Niel Lambrechts
2009-04-02 6:52 ` Tejun Heo
2009-04-02 11:03 ` Niel Lambrechts
2009-04-02 14:15 ` Niel Lambrechts
2009-04-04 4:54 ` Tejun Heo
2009-04-06 5:01 ` Niel Lambrechts
2009-04-06 10:09 ` Tejun Heo
2009-04-06 18:23 ` Niel Lambrechts
2009-04-06 19:39 ` Tejun Heo
2009-04-06 21:26 ` Niel Lambrechts
2009-04-09 18:18 ` Tejun Heo
2009-05-23 9:17 ` Niel Lambrechts
[not found] <cjtH6-3Ll-13@gated-at.bofh.it>
[not found] ` <cjtH6-3Ll-15@gated-at.bofh.it>
[not found] ` <cjtH6-3Ll-11@gated-at.bofh.it>
[not found] ` <cjutt-577-11@gated-at.bofh.it>
[not found] ` <cjJCb-47c-23@gated-at.bofh.it>
2009-03-27 19:10 ` Niel Lambrechts
2009-03-27 22:30 ` Arjan van de Ven
2009-03-28 10:22 ` Niel Lambrechts
2009-03-28 14:06 ` Rafael J. Wysocki
2009-03-30 8:43 ` Tejun Heo
2009-03-30 8:55 ` Tejun Heo
[not found] <cjlqb-7sp-1@gated-at.bofh.it>
[not found] ` <cjq6y-6sq-11@gated-at.bofh.it>
2009-03-25 5:19 ` 2.6.29 regression: ATA bus errors on resume (was: EXT4: __ext4_get_inode_loc errors after s2disk) Niel Lambrechts
2009-03-25 6:06 ` 2.6.29 regression: ATA bus errors on resume Jeff Garzik
2009-03-25 21:40 ` Niel Lambrechts
2009-03-25 22:16 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090619150051.GD1389@ucw.cz \
--to=pavel@ucw.cz \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=htejun@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=niel.lambrechts@gmail.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.