From: Niel Lambrechts <niel.lambrechts@gmail.com>
To: Tejun Heo <tj@kernel.org>
Cc: "linux.kernel" <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.29 regression: ATA bus errors on resume
Date: Mon, 06 Apr 2009 23:26:42 +0200 [thread overview]
Message-ID: <49DA7392.4020809@gmail.com> (raw)
In-Reply-To: <49DA5A83.2070002@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 1610 bytes --]
On 04/06/2009 09:39 PM, Tejun Heo wrote:
> Hello,
>
> Niel Lambrechts wrote:
>
>> On 04/06/2009 12:09 PM, Tejun Heo wrote:
>>
>>>> Will the fix naturally make its way into the mainline kernel, or is
>>>> there any extra debugging/testing I can help with?
>>>>
>>>>
>>> Well, the problem is the debug patch doesn't actually do anything
>>> other than printing out messages. It could be that the problem is
>>> timing dependent (which is likely anyway). You still can reporduce
>>> the problem with the patch, right?
>>>
>>>
>> Heh? You provided two patches, with the last one you said:
>>
>
> Yeah, the second one actually only added printks to see whether that's
> the case. No behavior change.
>
>
>>> Strange. Maybe IO commands are getting through while the sdev is
>>> still in quiesce state? Can you please repeat the test with the
>>> attached patch?
>>>
>> With the latter, I have not encountered the original problem i.e. any
>> severe EXT4 corruption again, not in 2.6.29 and not in 2.6.29.1.
>>
>
> Eh... so, we're definitely seeing something which is dependent on
> timing.
>
>
>> Do I also need to try the last patch without any debugging messages?
>>
>
> Then there will be nothing left. :-) Can you please try the attached
> patch? It's still only debug messages but lighter; hopefully, it
> won't mask the problem.
>
Sorry, my bad - I assumed the 2nd patch actually made a functional
difference... :)
Here is the output on 2.6.29.1 with your new patch - still nothing
serious happening, resume still seems okay!
cheers
Niel
[-- Attachment #2: resume-t3.txt --]
[-- Type: text/plain, Size: 14703 bytes --]
Apr 6 23:12:40 linux-7vph kernel: Syncing filesystems ... done.
Apr 6 23:12:40 linux-7vph kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
Apr 6 23:12:40 linux-7vph kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Apr 6 23:12:40 linux-7vph kernel: PM: Shrinking memory... done (64710 pages freed)
Apr 6 23:12:40 linux-7vph kernel: PM: Freed 258840 kbytes in 2.57 seconds (100.71 MB/s)
Apr 6 23:12:40 linux-7vph kernel: Suspending console(s) (use no_console_suspend to debug)
Apr 6 23:12:40 linux-7vph kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 6 23:12:40 linux-7vph kernel: ACPI handle has no context!
Apr 6 23:12:40 linux-7vph kernel: iwlagn 0000:03:00.0: PCI INT A disabled
Apr 6 23:12:40 linux-7vph kernel: ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Apr 6 23:12:40 linux-7vph kernel: ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Apr 6 23:12:40 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
Apr 6 23:12:40 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Apr 6 23:12:41 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B disabled
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C disabled
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: PME# enabled
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: PME# enabled
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A disabled
Apr 6 23:12:41 linux-7vph kernel: ACPI: Preparing to enter system sleep state S4
Apr 6 23:12:41 linux-7vph kernel: PM: Saving platform NVS memory
Apr 6 23:12:41 linux-7vph kernel: Disabling non-boot CPUs ...
Apr 6 23:12:41 linux-7vph kernel: CPU 1 is now offline
Apr 6 23:12:41 linux-7vph kernel: SMP alternatives: switching to UP code
Apr 6 23:12:41 linux-7vph kernel: CPU0 attaching NULL sched-domain.
Apr 6 23:12:41 linux-7vph kernel: CPU1 attaching NULL sched-domain.
Apr 6 23:12:41 linux-7vph kernel: CPU0 attaching NULL sched-domain.
Apr 6 23:12:41 linux-7vph kernel: CPU1 is down
Apr 6 23:12:41 linux-7vph kernel: Extended CMOS year: 2000
Apr 6 23:12:41 linux-7vph kernel: PM: Creating hibernation image:
Apr 6 23:12:41 linux-7vph kernel: PM: Need to copy 124169 pages
Apr 6 23:12:41 linux-7vph kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Apr 6 23:12:41 linux-7vph kernel: Intel machine check architecture supported.
Apr 6 23:12:41 linux-7vph kernel: Intel machine check reporting enabled on CPU#0.
Apr 6 23:12:41 linux-7vph kernel: PM: Restoring platform NVS memory
Apr 6 23:12:41 linux-7vph kernel: Extended CMOS year: 2000
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
Apr 6 23:12:41 linux-7vph kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
Apr 6 23:12:41 linux-7vph kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
Apr 6 23:12:41 linux-7vph kernel: Enabling non-boot CPUs ...
Apr 6 23:12:41 linux-7vph kernel: SMP alternatives: switching to SMP code
Apr 6 23:12:41 linux-7vph kernel: Booting processor 1 APIC 0x1 ip 0x6000
Apr 6 23:12:41 linux-7vph kernel: Initializing CPU#1
Apr 6 23:12:41 linux-7vph kernel: Calibrating delay using timer specific routine.. 5054.09 BogoMIPS (lpj=10108190)
Apr 6 23:12:41 linux-7vph kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 6 23:12:41 linux-7vph kernel: CPU: L2 cache: 6144K
Apr 6 23:12:41 linux-7vph kernel: [ds] using Core 2/Atom configuration
Apr 6 23:12:41 linux-7vph kernel: CPU: Physical Processor ID: 0
Apr 6 23:12:41 linux-7vph kernel: CPU: Processor Core ID: 1
Apr 6 23:12:41 linux-7vph kernel: Intel machine check architecture supported.
Apr 6 23:12:41 linux-7vph kernel: Intel machine check reporting enabled on CPU#1.
Apr 6 23:12:41 linux-7vph kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Apr 6 23:12:41 linux-7vph kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
Apr 6 23:12:41 linux-7vph kernel: CPU0 attaching NULL sched-domain.
Apr 6 23:12:41 linux-7vph kernel: Switched to high resolution mode on CPU 1
Apr 6 23:12:41 linux-7vph kernel: CPU0 attaching sched-domain:
Apr 6 23:12:41 linux-7vph kernel: domain 0: span 0-1 level MC
Apr 6 23:12:41 linux-7vph kernel: groups: 0 1
Apr 6 23:12:41 linux-7vph kernel: CPU1 attaching sched-domain:
Apr 6 23:12:41 linux-7vph kernel: domain 0: span 0-1 level MC
Apr 6 23:12:41 linux-7vph kernel: groups: 1 0
Apr 6 23:12:41 linux-7vph kernel: CPU1 is up
Apr 6 23:12:41 linux-7vph kernel: ACPI: Waking up from system sleep state S4
Apr 6 23:12:41 linux-7vph kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:02.0: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:02.0: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:02.1: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:03.0: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 6 23:12:41 linux-7vph kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: pcieport-driver 0000:00:1c.1: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: pcieport-driver 0000:00:1c.3: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: pcieport-driver 0000:00:1c.4: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 6 23:12:41 linux-7vph kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:1e.0: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: ahci 0000:00:1f.2: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
Apr 6 23:12:41 linux-7vph kernel: ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
Apr 6 23:12:41 linux-7vph kernel: iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr 6 23:12:41 linux-7vph kernel: iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
Apr 6 23:12:41 linux-7vph kernel: pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 6 23:12:41 linux-7vph kernel: Registered led device: iwl-phy0:radio
Apr 6 23:12:41 linux-7vph kernel: Registered led device: iwl-phy0:assoc
Apr 6 23:12:41 linux-7vph kernel: Registered led device: iwl-phy0:RX
Apr 6 23:12:41 linux-7vph kernel: Registered led device: iwl-phy0:TX
Apr 6 23:12:41 linux-7vph kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4]
Apr 6 23:12:41 linux-7vph kernel: pci 0000:15:00.2: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: pci 0000:15:00.3: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: pci 0000:15:00.4: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: pci 0000:15:00.5: PME# disabled
Apr 6 23:12:41 linux-7vph kernel: sd 0:0:0:0: [sda] Starting disk
Apr 6 23:12:41 linux-7vph kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 6 23:12:41 linux-7vph kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Apr 6 23:12:41 linux-7vph kernel: ata1.00: configured for UDMA/133
Apr 6 23:12:41 linux-7vph kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
Apr 6 23:12:41 linux-7vph kernel: ata1: irq_stat 0x00400040, connection status changed
Apr 6 23:12:41 linux-7vph kernel: ata1: hard resetting link
Apr 6 23:12:41 linux-7vph kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata2.00: configured for UDMA/133
Apr 6 23:12:41 linux-7vph kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
Apr 6 23:12:41 linux-7vph kernel: ata2: irq_stat 0x40000001
Apr 6 23:12:41 linux-7vph kernel: ata2.00: configured for UDMA/133
Apr 6 23:12:41 linux-7vph kernel: ata2: EH complete
Apr 6 23:12:41 linux-7vph kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 6 23:12:41 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Apr 6 23:12:41 linux-7vph kernel: ata1.00: configured for UDMA/133
Apr 6 23:12:41 linux-7vph kernel: ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 t3
Apr 6 23:12:41 linux-7vph kernel: ata1.00: configured for UDMA/133
Apr 6 23:12:41 linux-7vph kernel: ata1: EH complete
Apr 6 23:12:41 linux-7vph kernel: sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
Apr 6 23:12:41 linux-7vph kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 6 23:12:41 linux-7vph kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 6 23:12:41 linux-7vph kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 6 23:12:41 linux-7vph kernel: sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
Apr 6 23:12:41 linux-7vph kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 6 23:12:41 linux-7vph kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 6 23:12:41 linux-7vph kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900407, writing 0x900403)
Apr 6 23:12:41 linux-7vph kernel: pci 0000:00:02.0: setting latency timer to 64
Apr 6 23:12:41 linux-7vph kernel: Restarting tasks ... done.
next prev parent reply other threads:[~2009-04-06 21:26 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <ckpL0-3TE-3@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-5@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-7@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-9@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-11@gated-at.bofh.it>
[not found] ` <ckpL0-3TE-1@gated-at.bofh.it>
[not found] ` <cllvN-2Gf-1@gated-at.bofh.it>
2009-03-30 14:30 ` 2.6.29 regression: ATA bus errors on resume Niel Lambrechts
2009-03-30 14:40 ` Jeff Garzik
2009-04-01 19:48 ` Niel Lambrechts
2009-04-03 20:09 ` Jeff Garzik
2009-04-03 20:54 ` Niel Lambrechts
2009-04-02 1:50 ` Tejun Heo
2009-04-02 6:20 ` Niel Lambrechts
2009-04-02 6:52 ` Tejun Heo
2009-04-02 11:03 ` Niel Lambrechts
2009-04-02 14:15 ` Niel Lambrechts
2009-04-04 4:54 ` Tejun Heo
2009-04-06 5:01 ` Niel Lambrechts
2009-04-06 10:09 ` Tejun Heo
2009-04-06 18:23 ` Niel Lambrechts
2009-04-06 19:39 ` Tejun Heo
2009-04-06 21:26 ` Niel Lambrechts [this message]
2009-04-09 18:18 ` Tejun Heo
2009-05-23 9:17 ` Niel Lambrechts
2009-05-23 10:26 ` 2.6.29 regression: ATA bus errors on resume (output with debug patch) Niel Lambrechts
2009-05-25 0:32 ` Tejun Heo
[not found] <clqON-2Xv-7@gated-at.bofh.it>
[not found] ` <clqON-2Xv-9@gated-at.bofh.it>
[not found] ` <clqON-2Xv-11@gated-at.bofh.it>
[not found] ` <clqON-2Xv-13@gated-at.bofh.it>
[not found] ` <clqON-2Xv-15@gated-at.bofh.it>
[not found] ` <clqON-2Xv-17@gated-at.bofh.it>
[not found] ` <clqON-2Xv-19@gated-at.bofh.it>
[not found] ` <clqON-2Xv-5@gated-at.bofh.it>
[not found] ` <clqYt-3bu-5@gated-at.bofh.it>
2009-03-30 18:24 ` 2.6.29 regression: ATA bus errors on resume Niel Lambrechts
2009-03-30 19:17 ` Jeff Garzik
[not found] ` <cmknZ-8lW-9@gated-at.bofh.it>
[not found] ` <cmoBl-6Ok-21@gated-at.bofh.it>
[not found] ` <cmp4n-7rb-15@gated-at.bofh.it>
[not found] ` <cmsYg-5BR-27@gated-at.bofh.it>
[not found] ` <cmvW7-1Yj-23@gated-at.bofh.it>
[not found] ` <cnheh-3vO-7@gated-at.bofh.it>
[not found] ` <cnPg1-7Q4-19@gated-at.bofh.it>
[not found] ` <cnTWo-7bV-25@gated-at.bofh.it>
[not found] ` <co1Kd-350-5@gated-at.bofh.it>
[not found] ` <co2Qf-4QQ-27@gated-at.bofh.it>
[not found] ` <co4yj-7Mc-5@gated-at.bofh.it>
[not found] ` <cp71c-4py-29@gated-at.bofh.it>
[not found] ` <cEVyE-re-1@gated-at.bofh.it>
2009-05-23 9:36 ` Niel Lambrechts
2009-05-25 1:10 ` Tejun Heo
2009-05-25 8:15 ` Alan Cox
2009-05-25 22:06 ` Niel Lambrechts
2009-05-26 4:58 ` Tejun Heo
2009-05-26 5:43 ` Niel Lambrechts
2009-05-26 5:50 ` Tejun Heo
2009-05-26 6:13 ` Niel Lambrechts
2009-05-26 13:33 ` Tejun Heo
2009-05-26 18:14 ` Niel Lambrechts
2009-05-27 0:07 ` Tejun Heo
2009-05-27 14:01 ` Niel Lambrechts
2009-06-01 18:57 ` Niel Lambrechts
2009-06-03 3:14 ` Tejun Heo
2009-06-03 4:28 ` Tejun Heo
2009-06-06 7:05 ` Niel Lambrechts
2009-06-19 15:04 ` Pavel Machek
2009-06-25 12:57 ` Tejun Heo
2009-06-25 15:25 ` Niel Lambrechts
2009-06-26 0:46 ` Tejun Heo
2009-06-26 6:24 ` Niel Lambrechts
2009-09-18 20:26 ` Berthold Gunreben
2009-09-25 4:11 ` Tejun Heo
2009-09-30 9:58 ` Berthold Gunreben
2009-09-30 10:26 ` Tejun Heo
2009-05-26 4:58 ` Tejun Heo
[not found] <cjtH6-3Ll-13@gated-at.bofh.it>
[not found] ` <cjtH6-3Ll-15@gated-at.bofh.it>
[not found] ` <cjtH6-3Ll-11@gated-at.bofh.it>
[not found] ` <cjutt-577-11@gated-at.bofh.it>
[not found] ` <cjJCb-47c-23@gated-at.bofh.it>
2009-03-27 19:10 ` Niel Lambrechts
2009-03-27 22:30 ` Arjan van de Ven
2009-03-28 10:22 ` Niel Lambrechts
2009-03-28 14:06 ` Rafael J. Wysocki
2009-03-30 8:43 ` Tejun Heo
2009-03-30 8:55 ` Tejun Heo
[not found] <cjlqb-7sp-1@gated-at.bofh.it>
[not found] ` <cjq6y-6sq-11@gated-at.bofh.it>
2009-03-25 5:19 ` 2.6.29 regression: ATA bus errors on resume (was: EXT4: __ext4_get_inode_loc errors after s2disk) Niel Lambrechts
2009-03-25 6:06 ` 2.6.29 regression: ATA bus errors on resume Jeff Garzik
2009-03-25 21:40 ` Niel Lambrechts
2009-03-25 22:16 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49DA7392.4020809@gmail.com \
--to=niel.lambrechts@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.