[patch 0/6] 2.6.31-rc4 spi and spi_s3c24xx updates

[patch 0/6] 2.6.31-rc4 spi and spi_s3c24xx updates

[Ben Dooks]

Some bugfixes and warning squashing for the SPI documentation
and the spi_s3c24xx driver.

-- 
Ben Dooks, Simtec Electronics

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july

[patch 1/6] spi: fix spelling of automatically in documentation

[Ben Dooks]

[-- Attachment #1: spi-fix-spello1.patch --]
[-- Type: text/plain, Size: 1278 bytes --]

Fix spelling of automatically in Documentation/spi/spi-summary.

Signed-off-by: Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>

---
 Documentation/spi/spi-summary |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: b/Documentation/spi/spi-summary
===================================================================
--- a/Documentation/spi/spi-summary	2009-07-09 15:07:37.000000000 +0100
+++ b/Documentation/spi/spi-summary	2009-07-09 15:09:41.000000000 +0100
@@ -350,7 +350,7 @@ SPI protocol drivers somewhat resemble p
 		.resume		= CHIP_resume,
 	};
 
-The driver core will autmatically attempt to bind this driver to any SPI
+The driver core will automatically attempt to bind this driver to any SPI
 device whose board_info gave a modalias of "CHIP".  Your probe() code
 might look like this unless you're creating a device which is managing
 a bus (appearing under /sys/class/spi_master).

-- 

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july

[patch 2/6] spi_s3c24xx: fix clock rate calculation

[Ben Dooks]

[-- Attachment #1: spi-fix-buad-generation.patch --]
[-- Type: text/plain, Size: 1949 bytes --]

Currently the clock rate calculation may round as pleased, which
means that it is possible that we will round down and end up with
a faster clock rate than intended.

Change the calculation to use DIV_ROUND_UP() to ensure that we
end up with a clock rate either the same as or lower than the
user requested one.

Signed-off-by: Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>

---
 drivers/spi/spi_s3c24xx.c |   17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

Index: b/drivers/spi/spi_s3c24xx.c
===================================================================
--- a/drivers/spi/spi_s3c24xx.c	2009-07-14 13:56:07.000000000 +0100
+++ b/drivers/spi/spi_s3c24xx.c	2009-07-14 14:08:45.000000000 +0100
@@ -111,6 +111,7 @@ static int s3c24xx_spi_setupxfer(struct 
 	unsigned int bpw;
 	unsigned int hz;
 	unsigned int div;
+	unsigned long clk;
 
 	bpw = t ? t->bits_per_word : spi->bits_per_word;
 	hz  = t ? t->speed_hz : spi->max_speed_hz;
@@ -120,20 +121,16 @@ static int s3c24xx_spi_setupxfer(struct 
 		return -EINVAL;
 	}
 
-	div = clk_get_rate(hw->clk) / hz;
-
-	/* is clk = pclk / (2 * (pre+1)), or is it
-	 *    clk = (pclk * 2) / ( pre + 1) */
-
-	div /= 2;
-
-	if (div > 0)
-		div -= 1;
+	clk = clk_get_rate(hw->clk);
+	div = DIV_ROUND_UP(clk, hz * 2) - 1;
 
 	if (div > 255)
 		div = 255;
 
-	dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+	dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
+		div, hz, clk / (2 * (div + 1)));
+
+
 	writeb(div, hw->regs + S3C2410_SPPRE);
 
 	spin_lock(&hw->bitbang.lock);

-- 

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july

[patch 3/6] spi_s3c24xx; Fix transfer setup code

[Ben Dooks]

[-- Attachment #1: spi-fix-bitperword.patch --]
[-- Type: text/plain, Size: 1218 bytes --]

Since the changes to the bitbang driver, there is the possibility we
will be called with either the speed_hz or bpw values zero. We take
these to mean that the default values (8 bits per word, or maximum
bus speed).

Signed-off-by: Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>

---

Index: b/drivers/spi/spi_s3c24xx.c
===================================================================
--- a/drivers/spi/spi_s3c24xx.c	2009-07-27 18:55:16.000000000 +0100
+++ b/drivers/spi/spi_s3c24xx.c	2009-07-27 18:56:08.000000000 +0100
@@ -116,6 +116,12 @@ static int s3c24xx_spi_setupxfer(struct 
 	bpw = t ? t->bits_per_word : spi->bits_per_word;
 	hz  = t ? t->speed_hz : spi->max_speed_hz;
 
+	if (!bpw)
+		bpw = 8;
+
+	if (!hz)
+		hz = spi->max_speed_hz;
+
 	if (bpw != 8) {
 		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
 		return -EINVAL;

-- 

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july

[patch 4/6] spi_s3c24xx: fix header includes

[Ben Dooks]

[-- Attachment #1: spi-fix-includes.patch --]
[-- Type: text/plain, Size: 1248 bytes --]

The driver includes <asm/io.h> where it should be including <linux/io.h>
and also includes <mach/hardware.h> and <asm/dma.h> without using anything
from these.

Signed-off-by; Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>
---
 drivers/spi/spi_s3c24xx.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

Index: b/drivers/spi/spi_s3c24xx.c
===================================================================
--- a/drivers/spi/spi_s3c24xx.c	2009-07-28 15:19:28.000000000 +0100
+++ b/drivers/spi/spi_s3c24xx.c	2009-07-28 15:20:16.000000000 +0100
@@ -20,14 +20,11 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/io.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <mach/hardware.h>
-
 #include <plat/regs-spi.h>
 #include <mach/spi.h>
 

-- 

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july

[patch 5/6] spi_s3c24xx: use dev_pm_ops

[Ben Dooks]

[-- Attachment #1: spi-use-pmops.patch --]
[-- Type: text/plain, Size: 2376 bytes --]

Change the spi_s3c24xx driver to use dev_pm_ops to avoid the
following warning during probe:

Platform driver 's3c2410-spi' needs updating - please use dev_pm_ops

Signed-off-by: Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>

---

---
 drivers/spi/spi_s3c24xx.c |   22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

Index: b/drivers/spi/spi_s3c24xx.c
===================================================================
--- a/drivers/spi/spi_s3c24xx.c	2009-07-28 15:20:16.000000000 +0100
+++ b/drivers/spi/spi_s3c24xx.c	2009-07-28 15:20:22.000000000 +0100
@@ -418,9 +418,9 @@ static int __exit s3c24xx_spi_remove(str
 
 #ifdef CONFIG_PM
 
-static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
+static int s3c24xx_spi_suspend(struct device *dev)
 {
-	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+	struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev));
 
 	if (hw->pdata && hw->pdata->gpio_setup)
 		hw->pdata->gpio_setup(hw->pdata, 0);
@@ -429,27 +429,31 @@ static int s3c24xx_spi_suspend(struct pl
 	return 0;
 }
 
-static int s3c24xx_spi_resume(struct platform_device *pdev)
+static int s3c24xx_spi_resume(struct device *dev)
 {
-	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+	struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev));
 
 	s3c24xx_spi_initialsetup(hw);
 	return 0;
 }
 
+static struct dev_pm_ops s3c24xx_spi_pmops = {
+	.suspend	= s3c24xx_spi_suspend,
+	.resume		= s3c24xx_spi_resume,
+};
+
+#define S3C24XX_SPI_PMOPS &s3c24xx_spi_pmops
 #else
-#define s3c24xx_spi_suspend NULL
-#define s3c24xx_spi_resume  NULL
-#endif
+#define S3C24XX_SPI_PMOPS NULL
+#endif /* CONFIG_PM */
 
 MODULE_ALIAS("platform:s3c2410-spi");
 static struct platform_driver s3c24xx_spi_driver = {
 	.remove		= __exit_p(s3c24xx_spi_remove),
-	.suspend	= s3c24xx_spi_suspend,
-	.resume		= s3c24xx_spi_resume,
 	.driver		= {
 		.name	= "s3c2410-spi",
 		.owner	= THIS_MODULE,
+		.pm	= S3C24XX_SPI_PMOPS,
 	},
 };
 

-- 

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july

[patch 6/6] spi_s3c24xx: cache device setup data

[Ben Dooks]

[-- Attachment #1: spi-improve-transfer-setup.patch --]
[-- Type: text/plain, Size: 6159 bytes --]

With the update to the spi_bitbang driver, the transfer setup code is
being called more often, and thus is often re-doing calculations that
have been done before. The SPI layer allows our driver to add its
own data to each device so add a result cache to each device.

This should also remove the problem where we where directly setting up
registers in the setup call which meant we might overwrite the state of
an extant transfer.,

Signed-off-by: Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>

---
 drivers/spi/spi_s3c24xx.c |  126 ++++++++++++++++++++++++++++++++--------------
 1 file changed, 89 insertions(+), 37 deletions(-)

Index: b/drivers/spi/spi_s3c24xx.c
===================================================================
--- a/drivers/spi/spi_s3c24xx.c	2009-07-28 15:20:22.000000000 +0100
+++ b/drivers/spi/spi_s3c24xx.c	2009-07-28 15:20:28.000000000 +0100
@@ -28,6 +28,20 @@
 #include <plat/regs-spi.h>
 #include <mach/spi.h>
 
+/**
+ * s3c24xx_spi_devstate - per device data
+ * @hz: Last frequency calculated for @sppre field.
+ * @mode: Last mode setting for the @spcon field.
+ * @spcon: Value to write to the SPCON register.
+ * @sppre: Value to write to the SPPRE register.
+ */
+struct s3c24xx_spi_devstate {
+	unsigned int	hz;
+	unsigned int	mode;
+	u8		spcon;
+	u8		sppre;
+};
+
 struct s3c24xx_spi {
 	/* bitbang has to be first */
 	struct spi_bitbang	 bitbang;
@@ -68,43 +82,31 @@ static void s3c24xx_spi_gpiocs(struct s3
 
 static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
 {
+	struct s3c24xx_spi_devstate *cs = spi->controller_state;
 	struct s3c24xx_spi *hw = to_hw(spi);
 	unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
-	unsigned int spcon;
+
+	/* change the chipselect state and the state of the spi engine clock */
 
 	switch (value) {
 	case BITBANG_CS_INACTIVE:
 		hw->set_cs(hw->pdata, spi->chip_select, cspol^1);
+		writeb(cs->spcon, hw->regs + S3C2410_SPCON);
 		break;
 
 	case BITBANG_CS_ACTIVE:
-		spcon = readb(hw->regs + S3C2410_SPCON);
-
-		if (spi->mode & SPI_CPHA)
-			spcon |= S3C2410_SPCON_CPHA_FMTB;
-		else
-			spcon &= ~S3C2410_SPCON_CPHA_FMTB;
-
-		if (spi->mode & SPI_CPOL)
-			spcon |= S3C2410_SPCON_CPOL_HIGH;
-		else
-			spcon &= ~S3C2410_SPCON_CPOL_HIGH;
-
-		spcon |= S3C2410_SPCON_ENSCK;
-
-		/* write new configration */
-
-		writeb(spcon, hw->regs + S3C2410_SPCON);
+		writeb(cs->spcon | S3C2410_SPCON_ENSCK,
+		       hw->regs + S3C2410_SPCON);
 		hw->set_cs(hw->pdata, spi->chip_select, cspol);
-
 		break;
 	}
 }
 
-static int s3c24xx_spi_setupxfer(struct spi_device *spi,
-				 struct spi_transfer *t)
+static int s3c24xx_spi_update_state(struct spi_device *spi,
+				    struct spi_transfer *t)
 {
 	struct s3c24xx_spi *hw = to_hw(spi);
+	struct s3c24xx_spi_devstate *cs = spi->controller_state;
 	unsigned int bpw;
 	unsigned int hz;
 	unsigned int div;
@@ -124,41 +126,89 @@ static int s3c24xx_spi_setupxfer(struct 
 		return -EINVAL;
 	}
 
-	clk = clk_get_rate(hw->clk);
-	div = DIV_ROUND_UP(clk, hz * 2) - 1;
+	if (spi->mode != cs->mode) {
+		u8 spcon = SPCON_DEFAULT;
 
-	if (div > 255)
-		div = 255;
+		if (spi->mode & SPI_CPHA)
+			spcon |= S3C2410_SPCON_CPHA_FMTB;
 
-	dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
-		div, hz, clk / (2 * (div + 1)));
+		if (spi->mode & SPI_CPOL)
+			spcon |= S3C2410_SPCON_CPOL_HIGH;
 
+		cs->mode = spi->mode;
+		cs->spcon = spcon;
+	}
 
-	writeb(div, hw->regs + S3C2410_SPPRE);
+	if (cs->hz != hz) {
+		clk = clk_get_rate(hw->clk);
+		div = DIV_ROUND_UP(clk, hz * 2) - 1;
 
-	spin_lock(&hw->bitbang.lock);
-	if (!hw->bitbang.busy) {
-		hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
-		/* need to ndelay for 0.5 clocktick ? */
+		if (div > 255)
+			div = 255;
+
+		dev_dbg(&spi->dev, "pre-scaler=%d (wanted %d, got %ld)\n",
+			div, hz, clk / (2 * (div + 1)));
+
+		cs->hz = hz;
+		cs->sppre = div;
 	}
-	spin_unlock(&hw->bitbang.lock);
 
 	return 0;
 }
 
+static int s3c24xx_spi_setupxfer(struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	struct s3c24xx_spi_devstate *cs = spi->controller_state;
+	struct s3c24xx_spi *hw = to_hw(spi);
+	int ret;
+
+	ret = s3c24xx_spi_update_state(spi, t);
+	if (!ret)
+		writeb(cs->sppre, hw->regs + S3C2410_SPPRE);
+
+	return ret;
+}
+
 static int s3c24xx_spi_setup(struct spi_device *spi)
 {
+	struct s3c24xx_spi_devstate *cs = spi->controller_state;
+	struct s3c24xx_spi *hw = to_hw(spi);
 	int ret;
 
-	ret = s3c24xx_spi_setupxfer(spi, NULL);
-	if (ret < 0) {
-		dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+	/* allocate settings on the first call */
+	if (!cs) {
+		cs = kzalloc(sizeof(struct s3c24xx_spi_devstate), GFP_KERNEL);
+		if (!cs) {
+			dev_err(&spi->dev, "no memory for controller state\n");
+			return -ENOMEM;
+		}
+
+		cs->spcon = SPCON_DEFAULT;
+		cs->hz = -1;
+		spi->controller_state = cs;
+	}
+
+	/* initialise the state from the device */
+	ret = s3c24xx_spi_update_state(spi, NULL);
+	if (ret)
 		return ret;
+
+	spin_lock(&hw->bitbang.lock);
+	if (!hw->bitbang.busy) {
+		hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+		/* need to ndelay for 0.5 clocktick ? */
 	}
+	spin_unlock(&hw->bitbang.lock);
 
 	return 0;
 }
 
+static void s3c24xx_spi_cleanup(struct spi_device *spi)
+{
+	kfree(spi->controller_state);
+}
+
 static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
 {
 	return hw->tx ? hw->tx[count] : 0;
@@ -286,7 +336,9 @@ static int __init s3c24xx_spi_probe(stru
 	hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
 	hw->bitbang.chipselect     = s3c24xx_spi_chipsel;
 	hw->bitbang.txrx_bufs      = s3c24xx_spi_txrx;
-	hw->bitbang.master->setup  = s3c24xx_spi_setup;
+
+	hw->master->setup  = s3c24xx_spi_setup;
+	hw->master->cleanup = s3c24xx_spi_cleanup;
 
 	dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
 

-- 

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july