All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kalle.valo@iki.fi>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 07/23] wl1251: split spi interface into separate module
Date: Fri, 07 Aug 2009 13:33:34 +0300	[thread overview]
Message-ID: <20090807103334.31717.89927.stgit@tikku> (raw)
In-Reply-To: <20090807102732.31717.84006.stgit@tikku>

From: Bob Copeland <me@bobcopeland.com>

This creates a module called wl1251_spi.ko which contains just the
SPI-specific code.  The core remains in the module wl1251.ko.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
---

 drivers/net/wireless/wl12xx/Kconfig       |   17 ++++++++++++++---
 drivers/net/wireless/wl12xx/Makefile      |    4 +++-
 drivers/net/wireless/wl12xx/wl1251.h      |    2 +-
 drivers/net/wireless/wl12xx/wl1251_main.c |    9 +++++++++
 drivers/net/wireless/wl12xx/wl1251_spi.c  |   17 +++++++++++------
 5 files changed, 38 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index 82a0f97..e47d076 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -7,12 +7,23 @@ menuconfig WL12XX
 
 config WL1251
 	tristate "TI wl1251 support"
-	depends on WL12XX && SPI_MASTER && GENERIC_HARDIRQS
+	depends on WL12XX && GENERIC_HARDIRQS
 	select FW_LOADER
 	select CRC7
 	---help---
 	  This module adds support for wireless adapters based on
 	  TI wl1251 chipset.
 
-	  If you choose to build a module, it'll be called wl1251. Say N if
-	  unsure.
+	  If you choose to build a module, it'll be called wl1251. Say
+	  N if unsure.
+
+config WL1251_SPI
+	tristate "TI wl1251 SPI support"
+	depends on WL1251 && SPI_MASTER
+	---help---
+	  This module adds support for the SPI interface of adapters using
+	  TI wl1251 chipset.  Select this if your platform is using
+	  the SPI bus.
+
+	  If you choose to build a module, it'll be called wl1251_spi.
+	  Say N if unsure.
diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
index a978567..ebf623a 100644
--- a/drivers/net/wireless/wl12xx/Makefile
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -1,5 +1,7 @@
-wl1251-objs		= wl1251_main.o wl1251_spi.o wl1251_event.o \
+wl1251-objs		= wl1251_main.o wl1251_event.o \
 			  wl1251_tx.o wl1251_rx.o wl1251_ps.o wl1251_cmd.o \
 			  wl1251_acx.o wl1251_boot.o wl1251_init.o \
 			  wl1251_ops.o wl1251_debugfs.o wl1251_io.o
+
 obj-$(CONFIG_WL1251)	+= wl1251.o
+obj-$(CONFIG_WL1251_SPI)	+= wl1251_spi.o
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
index df4c06d..ebe2c70 100644
--- a/drivers/net/wireless/wl12xx/wl1251.h
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -291,7 +291,7 @@ struct wl1251 {
 	struct ieee80211_hw *hw;
 	bool mac80211_registered;
 
-	struct spi_device *spi;
+	void *if_priv;
 	const struct wl1251_if_operations *if_ops;
 
 	void (*set_power)(bool enable);
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 74544e1..abe157a 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -69,6 +69,7 @@ irqreturn_t wl1251_irq(int irq, void *cookie)
 
 	return IRQ_HANDLED;
 }
+EXPORT_SYMBOL_GPL(wl1251_irq);
 
 static int wl1251_fetch_firmware(struct wl1251 *wl)
 {
@@ -1198,6 +1199,7 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(wl1251_init_ieee80211);
 
 #define WL1251_DEFAULT_CHANNEL 1
 struct ieee80211_hw *wl1251_alloc_hw(void)
@@ -1270,6 +1272,7 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
 
 	return hw;
 }
+EXPORT_SYMBOL_GPL(wl1251_alloc_hw);
 
 int wl1251_free_hw(struct wl1251 *wl)
 {
@@ -1292,3 +1295,9 @@ int wl1251_free_hw(struct wl1251 *wl)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(wl1251_free_hw);
+
+MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <Kalle.Valo@nokia.com>");
+MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.c b/drivers/net/wireless/wl12xx/wl1251_spi.c
index 13e7a72..5967317 100644
--- a/drivers/net/wireless/wl12xx/wl1251_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1251_spi.c
@@ -31,6 +31,11 @@
 #include "reg.h"
 #include "wl1251_spi.h"
 
+static struct spi_device *wl_to_spi(struct wl1251 *wl)
+{
+	return wl->if_priv;
+}
+
 static void wl1251_spi_reset(struct wl1251 *wl)
 {
 	u8 *cmd;
@@ -52,7 +57,7 @@ static void wl1251_spi_reset(struct wl1251 *wl)
 	t.len = WSPI_INIT_CMD_LEN;
 	spi_message_add_tail(&t, &m);
 
-	spi_sync(wl->spi, &m);
+	spi_sync(wl_to_spi(wl), &m);
 
 	wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
 }
@@ -106,7 +111,7 @@ static void wl1251_spi_wake(struct wl1251 *wl)
 	t.len = WSPI_INIT_CMD_LEN;
 	spi_message_add_tail(&t, &m);
 
-	spi_sync(wl->spi, &m);
+	spi_sync(wl_to_spi(wl), &m);
 
 	wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
 }
@@ -149,7 +154,7 @@ static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
 	t[2].len = len;
 	spi_message_add_tail(&t[2], &m);
 
-	spi_sync(wl->spi, &m);
+	spi_sync(wl_to_spi(wl), &m);
 
 	/* FIXME: check busy words */
 
@@ -182,13 +187,13 @@ static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
 	t[1].len = len;
 	spi_message_add_tail(&t[1], &m);
 
-	spi_sync(wl->spi, &m);
+	spi_sync(wl_to_spi(wl), &m);
 
 	wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
 	wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
 }
 
-const struct wl1251_if_operations wl1251_spi_ops = {
+static const struct wl1251_if_operations wl1251_spi_ops = {
 	.read = wl1251_spi_read,
 	.write = wl1251_spi_write,
 	.reset = wl1251_spi_reset_wake,
@@ -215,7 +220,7 @@ static int __devinit wl1251_spi_probe(struct spi_device *spi)
 
 	SET_IEEE80211_DEV(hw, &spi->dev);
 	dev_set_drvdata(&spi->dev, wl);
-	wl->spi = spi;
+	wl->if_priv = spi;
 	wl->if_ops = &wl1251_spi_ops;
 
 	/* This is the only SPI value that we need to set here, the rest


  parent reply	other threads:[~2009-08-07 10:34 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-07 10:32 [PATCH 00/23] wl1251 sdio support Kalle Valo
2009-08-07 10:32 ` [PATCH 01/23] wl1251: remove fixed address support from spi commands Kalle Valo
2009-08-07 10:32 ` [PATCH 02/23] wl1251: separate bus i/o code into io.c Kalle Valo
2009-08-07 10:33 ` [PATCH 03/23] wl1251: use wiphy_dev instead of wl->spi->dev Kalle Valo
2009-08-07 10:33 ` [PATCH 04/23] wl1251: introduce wl1251_if_operations struct Kalle Valo
2009-08-07 10:33 ` [PATCH 05/23] wl1251: make wl1251_set_partition bus agnostic Kalle Valo
2009-08-07 10:33 ` [PATCH 06/23] wl1251: move module probe methods into spi.c Kalle Valo
2009-08-07 10:33 ` Kalle Valo [this message]
2009-08-07 10:33 ` [PATCH 08/23] wl1251: add sdio support Kalle Valo
2009-08-07 10:33 ` [PATCH 09/23] wl1251: make irq handling interface specific Kalle Valo
2009-08-07 10:33 ` [PATCH 10/23] wl1251: remove wl1251_ops Kalle Valo
2009-08-07 10:34 ` [PATCH 11/23] wl1251: reorder wl1251_cmd_join() arguments Kalle Valo
2009-08-07 10:34 ` [PATCH 12/23] wl1251: use beacon interval and dtim period provided by mac80211 Kalle Valo
2009-08-07 10:34 ` [PATCH 13/23] wl1251: remove wait parameter from wl1251_cmd_join() Kalle Valo
2009-08-07 10:34 ` [PATCH 14/23] wl1251: initialise default channel to zero Kalle Valo
2009-08-07 10:34 ` [PATCH 15/23] wl1251: add channel to wl1251_cmd_join() parameters Kalle Valo
2009-08-07 10:34 ` [PATCH 16/23] wl1251: create wl1251_join() Kalle Valo
2009-08-07 10:34 ` [PATCH 17/23] wl1251: fix channel setting in wl1251_op_config() Kalle Valo
2009-08-07 10:34 ` [PATCH 18/23] wl1251: move wl1251_acx_wake_up_conditions() to wl1251_ps_set_mode() Kalle Valo
2009-08-07 10:35 ` [PATCH 19/23] wl1251: use workqueue provided by mac80211 Kalle Valo
2009-08-07 10:35 ` [PATCH 20/23] wl1251: rename reg.h to wl1251_reg.h Kalle Valo
2009-08-07 10:35 ` [PATCH 21/23] wl1251: remove Luciano as maintainer Kalle Valo
2009-08-07 10:46   ` Luciano Coelho
2009-08-07 10:35 ` [PATCH 22/23] wl1251: add hw scan completed debug message Kalle Valo
2009-08-07 10:35 ` [PATCH 23/23] wl1251: hack to disable filters for fixing association Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090807103334.31717.89927.stgit@tikku \
    --to=kalle.valo@iki.fi \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.