All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: "Greg Kroah-Hartman" <gregkh@suse.de>
Cc: devel@driverdev.osuosl.org,
	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 21/22] Staging: rtxxx0: remove private ioctls
Date: Sun, 16 Aug 2009 21:32:02 +0200	[thread overview]
Message-ID: <20090816193202.3789.46058.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090816192934.3789.3648.sendpatchset@localhost.localdomain>

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rtxxx0: remove private ioctls

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/staging/rt2860/oid.h       |  122 --
 drivers/staging/rt2860/sta_ioctl.c | 1851 -------------------------------------
 2 files changed, 8 insertions(+), 1965 deletions(-)

Index: b/drivers/staging/rt2860/oid.h
===================================================================
--- a/drivers/staging/rt2860/oid.h
+++ b/drivers/staging/rt2860/oid.h
@@ -92,136 +92,31 @@
 //
 #define	OID_GET_SET_TOGGLE			0x8000
 
-#define	OID_802_11_NETWORK_TYPES_SUPPORTED			0x0103
-#define	OID_802_11_NETWORK_TYPE_IN_USE				0x0104
-#define	OID_802_11_RSSI_TRIGGER						0x0107
-#define	RT_OID_802_11_RSSI							0x0108 //rt2860	only , kathy
-#define	RT_OID_802_11_RSSI_1						0x0109 //rt2860	only , kathy
-#define	RT_OID_802_11_RSSI_2						0x010A //rt2860	only , kathy
-#define	OID_802_11_NUMBER_OF_ANTENNAS				0x010B
-#define	OID_802_11_RX_ANTENNA_SELECTED				0x010C
-#define	OID_802_11_TX_ANTENNA_SELECTED				0x010D
-#define	OID_802_11_SUPPORTED_RATES					0x010E
-#define	OID_802_11_ADD_WEP							0x0112
-#define	OID_802_11_REMOVE_WEP						0x0113
-#define	OID_802_11_DISASSOCIATE						0x0114
-#define	OID_802_11_PRIVACY_FILTER					0x0118
-#define	OID_802_11_ASSOCIATION_INFORMATION			0x011E
-#define	OID_802_11_TEST								0x011F
-#define	RT_OID_802_11_COUNTRY_REGION				0x0507
-#define	OID_802_11_BSSID_LIST_SCAN					0x0508
-#define	OID_802_11_SSID								0x0509
-#define	OID_802_11_BSSID							0x050A
-#define	RT_OID_802_11_RADIO							0x050B
-#define	RT_OID_802_11_PHY_MODE						0x050C
-#define	RT_OID_802_11_STA_CONFIG					0x050D
-#define	OID_802_11_DESIRED_RATES					0x050E
-#define	RT_OID_802_11_PREAMBLE						0x050F
-#define	OID_802_11_WEP_STATUS						0x0510
-#define	OID_802_11_AUTHENTICATION_MODE				0x0511
-#define	OID_802_11_INFRASTRUCTURE_MODE				0x0512
-#define	RT_OID_802_11_RESET_COUNTERS				0x0513
-#define	OID_802_11_RTS_THRESHOLD					0x0514
-#define	OID_802_11_FRAGMENTATION_THRESHOLD			0x0515
-#define	OID_802_11_POWER_MODE						0x0516
-#define	OID_802_11_TX_POWER_LEVEL					0x0517
-#define	RT_OID_802_11_ADD_WPA						0x0518
-#define	OID_802_11_REMOVE_KEY						0x0519
-#define	OID_802_11_ADD_KEY							0x0520
-#define	OID_802_11_CONFIGURATION					0x0521
-#define	OID_802_11_TX_PACKET_BURST					0x0522
-#define	RT_OID_802_11_QUERY_NOISE_LEVEL				0x0523
-#define	RT_OID_802_11_EXTRA_INFO					0x0524
-#ifdef	DBG
-#define	RT_OID_802_11_HARDWARE_REGISTER				0x0525
-#endif
-#define OID_802_11_ENCRYPTION_STATUS            OID_802_11_WEP_STATUS
-#define OID_802_11_DEAUTHENTICATION                 0x0526
-#define OID_802_11_DROP_UNENCRYPTED                 0x0527
-#define OID_802_11_MIC_FAILURE_REPORT_FRAME         0x0528
-
-// For 802.1x daemin using to require current driver configuration
-#define OID_802_11_RADIUS_QUERY_SETTING				0x0540
+#define OID_802_11_ADD_WEP			0x0112
+#define OID_802_11_DISASSOCIATE			0x0114
+#define OID_802_11_BSSID_LIST_SCAN		0x0508
+#define OID_802_11_SSID				0x0509
+#define OID_802_11_BSSID			0x050A
+#define OID_802_11_MIC_FAILURE_REPORT_FRAME	0x0528
 
 #define	RT_OID_DEVICE_NAME							0x0607
 #define	RT_OID_VERSION_INFO							0x0608
-#define	OID_802_11_BSSID_LIST						0x0609
-#define	OID_802_3_CURRENT_ADDRESS					0x060A
 #define	OID_GEN_MEDIA_CONNECT_STATUS				0x060B
-#define	RT_OID_802_11_QUERY_LINK_STATUS				0x060C
-#define	OID_802_11_RSSI								0x060D
-#define	OID_802_11_STATISTICS						0x060E
 #define	OID_GEN_RCV_OK								0x060F
 #define	OID_GEN_RCV_NO_BUFFER						0x0610
-#define	RT_OID_802_11_QUERY_EEPROM_VERSION			0x0611
-#define	RT_OID_802_11_QUERY_FIRMWARE_VERSION		0x0612
-#define	RT_OID_802_11_QUERY_LAST_RX_RATE			0x0613
-#define	RT_OID_802_11_TX_POWER_LEVEL_1				0x0614
-#define	RT_OID_802_11_QUERY_PIDVID					0x0615
 
 #define OID_SET_COUNTERMEASURES                     0x0616
-#define OID_802_11_SET_IEEE8021X                    0x0617
-#define OID_802_11_SET_IEEE8021X_REQUIRE_KEY        0x0618
-#define OID_802_11_PMKID                            0x0620
 #define RT_OID_WPA_SUPPLICANT_SUPPORT               0x0621
 #define RT_OID_WE_VERSION_COMPILED                  0x0622
 #define RT_OID_NEW_DRIVER                           0x0623
 
-
 //rt2860 , kathy
-#define	RT_OID_802_11_SNR_0							0x0630
-#define	RT_OID_802_11_SNR_1							0x0631
-#define	RT_OID_802_11_QUERY_LAST_TX_RATE			0x0632
-#define	RT_OID_802_11_QUERY_HT_PHYMODE				0x0633
-#define	RT_OID_802_11_SET_HT_PHYMODE				0x0634
-#define	OID_802_11_RELOAD_DEFAULTS					0x0635
-#define	RT_OID_802_11_QUERY_APSD_SETTING			0x0636
-#define	RT_OID_802_11_SET_APSD_SETTING				0x0637
-#define	RT_OID_802_11_QUERY_APSD_PSM				0x0638
-#define	RT_OID_802_11_SET_APSD_PSM					0x0639
-#define	RT_OID_802_11_QUERY_DLS						0x063A
-#define	RT_OID_802_11_SET_DLS						0x063B
-#define	RT_OID_802_11_QUERY_DLS_PARAM				0x063C
-#define	RT_OID_802_11_SET_DLS_PARAM					0x063D
-#define RT_OID_802_11_QUERY_WMM              		0x063E
-#define RT_OID_802_11_SET_WMM      					0x063F
-#define RT_OID_802_11_QUERY_IMME_BA_CAP				0x0640
-#define RT_OID_802_11_SET_IMME_BA_CAP				0x0641
-#define RT_OID_802_11_QUERY_BATABLE					0x0642
-#define RT_OID_802_11_ADD_IMME_BA					0x0643
-#define RT_OID_802_11_TEAR_IMME_BA					0x0644
 #define RT_OID_DRIVER_DEVICE_NAME                   0x0645
-#define RT_OID_802_11_QUERY_DAT_HT_PHYMODE          0x0646
 #define RT_OID_QUERY_MULTIPLE_CARD_SUPPORT          0x0647
 
 // Ralink defined OIDs
 // Dennis Lee move to platform specific
 
-#define	RT_OID_802_11_BSSID					  (OID_GET_SET_TOGGLE |	OID_802_11_BSSID)
-#define	RT_OID_802_11_SSID					  (OID_GET_SET_TOGGLE |	OID_802_11_SSID)
-#define	RT_OID_802_11_INFRASTRUCTURE_MODE	  (OID_GET_SET_TOGGLE |	OID_802_11_INFRASTRUCTURE_MODE)
-#define	RT_OID_802_11_ADD_WEP				  (OID_GET_SET_TOGGLE |	OID_802_11_ADD_WEP)
-#define	RT_OID_802_11_ADD_KEY				  (OID_GET_SET_TOGGLE |	OID_802_11_ADD_KEY)
-#define	RT_OID_802_11_REMOVE_WEP			  (OID_GET_SET_TOGGLE |	OID_802_11_REMOVE_WEP)
-#define	RT_OID_802_11_REMOVE_KEY			  (OID_GET_SET_TOGGLE |	OID_802_11_REMOVE_KEY)
-#define	RT_OID_802_11_DISASSOCIATE			  (OID_GET_SET_TOGGLE |	OID_802_11_DISASSOCIATE)
-#define	RT_OID_802_11_AUTHENTICATION_MODE	  (OID_GET_SET_TOGGLE |	OID_802_11_AUTHENTICATION_MODE)
-#define	RT_OID_802_11_PRIVACY_FILTER		  (OID_GET_SET_TOGGLE |	OID_802_11_PRIVACY_FILTER)
-#define	RT_OID_802_11_BSSID_LIST_SCAN		  (OID_GET_SET_TOGGLE |	OID_802_11_BSSID_LIST_SCAN)
-#define	RT_OID_802_11_WEP_STATUS			  (OID_GET_SET_TOGGLE |	OID_802_11_WEP_STATUS)
-#define	RT_OID_802_11_RELOAD_DEFAULTS		  (OID_GET_SET_TOGGLE |	OID_802_11_RELOAD_DEFAULTS)
-#define	RT_OID_802_11_NETWORK_TYPE_IN_USE	  (OID_GET_SET_TOGGLE |	OID_802_11_NETWORK_TYPE_IN_USE)
-#define	RT_OID_802_11_TX_POWER_LEVEL		  (OID_GET_SET_TOGGLE |	OID_802_11_TX_POWER_LEVEL)
-#define	RT_OID_802_11_RSSI_TRIGGER			  (OID_GET_SET_TOGGLE |	OID_802_11_RSSI_TRIGGER)
-#define	RT_OID_802_11_FRAGMENTATION_THRESHOLD (OID_GET_SET_TOGGLE |	OID_802_11_FRAGMENTATION_THRESHOLD)
-#define	RT_OID_802_11_RTS_THRESHOLD			  (OID_GET_SET_TOGGLE |	OID_802_11_RTS_THRESHOLD)
-#define	RT_OID_802_11_RX_ANTENNA_SELECTED	  (OID_GET_SET_TOGGLE |	OID_802_11_RX_ANTENNA_SELECTED)
-#define	RT_OID_802_11_TX_ANTENNA_SELECTED	  (OID_GET_SET_TOGGLE |	OID_802_11_TX_ANTENNA_SELECTED)
-#define	RT_OID_802_11_SUPPORTED_RATES		  (OID_GET_SET_TOGGLE |	OID_802_11_SUPPORTED_RATES)
-#define	RT_OID_802_11_DESIRED_RATES			  (OID_GET_SET_TOGGLE |	OID_802_11_DESIRED_RATES)
-#define	RT_OID_802_11_CONFIGURATION			  (OID_GET_SET_TOGGLE |	OID_802_11_CONFIGURATION)
-#define	RT_OID_802_11_POWER_MODE			  (OID_GET_SET_TOGGLE |	OID_802_11_POWER_MODE)
-
 typedef enum _NDIS_802_11_STATUS_TYPE
 {
     Ndis802_11StatusType_Authentication,
@@ -652,11 +547,6 @@ enum {
 #endif
 };
 
-#define OID_802_11_BUILD_CHANNEL_EX				0x0714
-#define OID_802_11_GET_CH_LIST					0x0715
-#define OID_802_11_GET_COUNTRY_CODE				0x0716
-#define OID_802_11_GET_CHANNEL_GEOGRAPHY		0x0717
-
 #ifdef LLTD_SUPPORT
 // for consistency with RT61
 #define RT_OID_GET_PHY_MODE                         0x761
Index: b/drivers/staging/rt2860/sta_ioctl.c
===================================================================
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -2740,1844 +2740,6 @@ const struct iw_handler_def rt28xx_iw_ha
 #endif
 };
 
-INT RTMPSetInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_MAC_ADDRESS             Bssid;
-    RT_802_11_PHY_MODE                  PhyMode;
-    RT_802_11_STA_CONFIG                StaConfig;
-    NDIS_802_11_RATES                   aryRates;
-    RT_802_11_PREAMBLE                  Preamble;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode = Ndis802_11AuthModeMax;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    PNDIS_802_11_KEY                    pKey = NULL;
-    PNDIS_802_11_WEP			        pWepKey =NULL;
-    PNDIS_802_11_REMOVE_KEY             pRemoveKey = NULL;
-    NDIS_802_11_CONFIGURATION           Config, *pConfig = NULL;
-    NDIS_802_11_NETWORK_TYPE            NetType;
-    ULONG                               Now;
-    UINT                                KeyIdx = 0;
-    INT                                 Status = NDIS_STATUS_SUCCESS, MaxPhyMode = PHY_11G;
-    ULONG                               PowerTemp;
-    BOOLEAN                             RadioState;
-    BOOLEAN                             StateMachineTouched = FALSE;
-	OID_SET_HT_PHYMODE					HT_PhyMode;	//11n ,kathy
-    PNDIS_802_11_PMKID                  pPmkId = NULL;
-    BOOLEAN				                IEEE8021xState = FALSE;
-    BOOLEAN				                IEEE8021x_required_keys = FALSE;
-    UCHAR                               wpa_supplicant_enable = 0;
-
-	MaxPhyMode = PHY_11N_5G;
-
-	DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(),	0x%08x\n", cmd&0x7FFF));
-    switch(cmd & 0x7FFF) {
-        case RT_OID_802_11_COUNTRY_REGION:
-            if (wrq->u.data.length < sizeof(UCHAR))
-                Status = -EINVAL;
-			// Only avaliable when EEPROM not programming
-            else if (!(pAdapter->CommonCfg.CountryRegion & 0x80) && !(pAdapter->CommonCfg.CountryRegionForABand & 0x80))
-            {
-                ULONG   Country;
-                UCHAR	TmpPhy;
-
-				Status = copy_from_user(&Country, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->CommonCfg.CountryRegion = (UCHAR)(Country & 0x000000FF);
-				pAdapter->CommonCfg.CountryRegionForABand = (UCHAR)((Country >> 8) & 0x000000FF);
-                TmpPhy = pAdapter->CommonCfg.PhyMode;
-				pAdapter->CommonCfg.PhyMode = 0xff;
-				// Build all corresponding channel information
-				RTMPSetPhyMode(pAdapter, TmpPhy);
-				SetCommonHT(pAdapter);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d  B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand,
-				    pAdapter->CommonCfg.CountryRegion));
-            }
-            break;
-        case OID_802_11_BSSID_LIST_SCAN:
-            Now = jiffies;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
-
-            if (MONITOR_ON(pAdapter))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
-                break;
-            }
-
-			//Benson add 20080527, when radio off, sta don't need to scan
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_RADIO_OFF))
-				break;
-
-			if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-			{
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is scanning now !!!\n"));
-				pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-				Status = NDIS_STATUS_SUCCESS;
-                break;
-            }
-
-			if (pAdapter->RalinkCounters.LastOneSecTotalTxCount > 100)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-            if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
-				((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
-				(pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) &&
-                (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
-				Status = NDIS_STATUS_SUCCESS;
-				pAdapter->StaCfg.ScanCnt = 99;		// Prevent auto scan triggered by this OID
-				break;
-            }
-
-
-            if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-            {
-                RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-            }
-
-            // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-            // this request, because this request is initiated by NDIS.
-            pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-            // Reset allowed scan retries
-            pAdapter->StaCfg.ScanCnt = 0;
-            pAdapter->StaCfg.LastScanTime = Now;
-
-			pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
-            RTMP_SET_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-            MlmeEnqueue(pAdapter,
-                        MLME_CNTL_STATE_MACHINE,
-                        OID_802_11_BSSID_LIST_SCAN,
-                        0,
-                        NULL);
-
-            Status = NDIS_STATUS_SUCCESS;
-            StateMachineTouched = TRUE;
-            break;
-        case OID_802_11_SSID:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_SSID))
-                Status = -EINVAL;
-            else
-            {
-            	PCHAR pSsidString = NULL;
-                Status = copy_from_user(&Ssid, wrq->u.data.pointer, wrq->u.data.length);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SSID (Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
-                if (Ssid.SsidLength > MAX_LEN_OF_SSID)
-                    Status = -EINVAL;
-                else
-                {
-                	if (Ssid.SsidLength == 0)
-                	{
-                		Set_SSID_Proc(pAdapter, "");
-                	}
-					else
-                	{
-	                	pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
-						if (pSsidString)
-						{
-							NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
-							NdisMoveMemory(pSsidString, Ssid.Ssid, Ssid.SsidLength);
-	                		Set_SSID_Proc(pAdapter, pSsidString);
-							kfree(pSsidString);
-						}
-						else
-							Status = -ENOMEM;
-                	}
-                }
-            }
-            break;
-        case OID_802_11_BSSID:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Bssid, wrq->u.data.pointer, wrq->u.data.length);
-
-                // tell CNTL state machine to call NdisMSetInformationComplete() after completing
-                // this request, because this request is initiated by NDIS.
-                pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-
-				// Prevent to connect AP again in STAMlmePeriodicExec
-				pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
-                // Reset allowed scan retries
-				pAdapter->StaCfg.ScanCnt = 0;
-
-                if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
-                {
-                    RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-                    DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
-                }
-                MlmeEnqueue(pAdapter,
-                            MLME_CNTL_STATE_MACHINE,
-                            OID_802_11_BSSID,
-                            sizeof(NDIS_802_11_MAC_ADDRESS),
-                            (VOID *)&Bssid);
-                Status = NDIS_STATUS_SUCCESS;
-                StateMachineTouched = TRUE;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID %02x:%02x:%02x:%02x:%02x:%02x\n",
-                                        Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-            }
-            break;
-        case RT_OID_802_11_RADIO:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RadioState, wrq->u.data.pointer, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RADIO (=%d)\n", RadioState));
-                if (pAdapter->StaCfg.bSwRadio != RadioState)
-                {
-                    pAdapter->StaCfg.bSwRadio = RadioState;
-                    if (pAdapter->StaCfg.bRadio != (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio))
-                    {
-                        pAdapter->StaCfg.bRadio = (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio);
-                        if (pAdapter->StaCfg.bRadio == TRUE)
-                        {
-                            MlmeRadioOn(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = EXTRA_INFO_CLEAR;
-                        }
-                        else
-                        {
-                            MlmeRadioOff(pAdapter);
-                            // Update extra information
-							pAdapter->ExtraInfo = SW_RADIO_OFF;
-                        }
-                    }
-                }
-            }
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PHY_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				if (PhyMode <= MaxPhyMode)
-				{
-                	RTMPSetPhyMode(pAdapter, PhyMode);
-					SetCommonHT(pAdapter);
-				}
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode));
-            }
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            if (wrq->u.data.length != sizeof(RT_802_11_STA_CONFIG))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&StaConfig, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bEnableTxBurst = StaConfig.EnableTxBurst;
-                pAdapter->CommonCfg.UseBGProtection = StaConfig.UseBGProtection;
-                pAdapter->CommonCfg.bUseShortSlotTime = 1; // 2003-10-30 always SHORT SLOT capable
-                if ((pAdapter->CommonCfg.PhyMode != StaConfig.AdhocMode) &&
-					(StaConfig.AdhocMode <= MaxPhyMode))
-                {
-                    // allow dynamic change of "USE OFDM rate or not" in ADHOC mode
-                    // if setting changed, need to reset current TX rate as well as BEACON frame format
-#ifdef RT30xx
-                    pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
-#endif
-                    if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                    {
-#ifndef RT30xx
-						pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
-#endif
-                    	RTMPSetPhyMode(pAdapter, PhyMode);
-                        MlmeUpdateTxRates(pAdapter, FALSE, 0);
-                        MakeIbssBeacon(pAdapter);           // re-build BEACON frame
-                        AsicEnableIbssSync(pAdapter);   // copy to on-chip memory
-                    }
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_STA_CONFIG (Burst=%d, Protection=%ld,ShortSlot=%d\n",
-                                        pAdapter->CommonCfg.bEnableTxBurst,
-                                        pAdapter->CommonCfg.UseBGProtection,
-                                        pAdapter->CommonCfg.bUseShortSlotTime));
-            }
-            break;
-        case OID_802_11_DESIRED_RATES:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RATES))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&aryRates, wrq->u.data.pointer, wrq->u.data.length);
-                NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
-                NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DESIRED_RATES (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
-                    pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
-                    pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
-                    pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
-                    pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
-                // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
-                MlmeUpdateTxRates(pAdapter, FALSE, 0);
-            }
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            if (wrq->u.data.length != sizeof(RT_802_11_PREAMBLE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Preamble, wrq->u.data.pointer, wrq->u.data.length);
-                if (Preamble == Rt802_11PreambleShort)
-                {
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleShort);
-                }
-                else if ((Preamble == Rt802_11PreambleLong) || (Preamble == Rt802_11PreambleAuto))
-                {
-                    // if user wants AUTO, initialize to LONG here, then change according to AP's
-                    // capability upon association.
-                    pAdapter->CommonCfg.TxPreamble = Preamble;
-                    MlmeSetTxPreamble(pAdapter, Rt802_11PreambleLong);
-                }
-                else
-                {
-                    Status = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PREAMBLE (=%d)\n", Preamble));
-            }
-            break;
-        case OID_802_11_WEP_STATUS:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_WEP_STATUS))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&WepStatus, wrq->u.data.pointer, wrq->u.data.length);
-                // Since TKIP, AES, WEP are all supported. It should not have any invalid setting
-                if (WepStatus <= Ndis802_11Encryption3KeyAbsent)
-                {
-                    if (pAdapter->StaCfg.WepStatus != WepStatus)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.WepStatus     = WepStatus;
-                    pAdapter->StaCfg.OrigWepStatus = WepStatus;
-                    pAdapter->StaCfg.PairCipher    = WepStatus;
-                	pAdapter->StaCfg.GroupCipher   = WepStatus;
-                }
-                else
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEP_STATUS (=%d)\n",WepStatus));
-            }
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_AUTHENTICATION_MODE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&AuthMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (AuthMode > Ndis802_11AuthModeMax)
-                {
-                    Status  = -EINVAL;
-                    break;
-                }
-                else
-                {
-                    if (pAdapter->StaCfg.AuthMode != AuthMode)
-                    {
-                        // Config has changed
-                        pAdapter->bConfigChanged = TRUE;
-                    }
-                    pAdapter->StaCfg.AuthMode = AuthMode;
-                }
-                pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_AUTHENTICATION_MODE (=%d) \n",pAdapter->StaCfg.AuthMode));
-            }
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_INFRASTRUCTURE))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&BssType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (BssType == Ndis802_11IBSS)
-					Set_NetworkType_Proc(pAdapter, "Adhoc");
-				else if (BssType == Ndis802_11Infrastructure)
-					Set_NetworkType_Proc(pAdapter, "Infra");
-				else if (BssType == Ndis802_11Monitor)
-					Set_NetworkType_Proc(pAdapter, "Monitor");
-				else
-				{
-					Status  = -EINVAL;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_INFRASTRUCTURE_MODE (unknown)\n"));
-				}
-			}
-			break;
-	 case OID_802_11_REMOVE_WEP:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_WEP\n"));
-            if (wrq->u.data.length != sizeof(NDIS_802_11_KEY_INDEX))
-            {
-				Status = -EINVAL;
-            }
-            else
-            {
-				KeyIdx = *(NDIS_802_11_KEY_INDEX *) wrq->u.data.pointer;
-
-				if (KeyIdx & 0x80000000)
-				{
-					// Should never set default bit when remove key
-					Status = -EINVAL;
-				}
-				else
-				{
-					KeyIdx = KeyIdx & 0x0fffffff;
-					if (KeyIdx >= 4){
-						Status = -EINVAL;
-					}
-					else
-					{
-						pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-						pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-						AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-					}
-				}
-            }
-            break;
-        case RT_OID_802_11_RESET_COUNTERS:
-            NdisZeroMemory(&pAdapter->WlanCounters, sizeof(COUNTER_802_11));
-            NdisZeroMemory(&pAdapter->Counters8023, sizeof(COUNTER_802_3));
-            NdisZeroMemory(&pAdapter->RalinkCounters, sizeof(COUNTER_RALINK));
-            pAdapter->Counters8023.RxNoBuffer   = 0;
-			pAdapter->Counters8023.GoodReceives = 0;
-			pAdapter->Counters8023.RxNoBuffer   = 0;
-#ifdef RT2870
-			pAdapter->BulkOutComplete	= 0;
-			pAdapter->BulkOutCompleteOther= 0;
-			pAdapter->BulkOutCompleteCancel = 0;
-			pAdapter->BulkOutReq = 0;
-			pAdapter->BulkInReq= 0;
-			pAdapter->BulkInComplete = 0;
-			pAdapter->BulkInCompleteFail = 0;
-#endif // RT2870 //
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RESET_COUNTERS \n"));
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_RTS_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&RtsThresh, wrq->u.data.pointer, wrq->u.data.length);
-                if (RtsThresh > MAX_RTS_THRESHOLD)
-                    Status  = -EINVAL;
-                else
-                    pAdapter->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_RTS_THRESHOLD (=%ld)\n",RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_FRAGMENTATION_THRESHOLD))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&FragThresh, wrq->u.data.pointer, wrq->u.data.length);
-                pAdapter->CommonCfg.bUseZeroToDisableFragment = FALSE;
-                if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
-                {
-                    if (FragThresh == 0)
-                    {
-                        pAdapter->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
-                        pAdapter->CommonCfg.bUseZeroToDisableFragment = TRUE;
-                    }
-                    else
-                        Status  = -EINVAL;
-                }
-                else
-                    pAdapter->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_FRAGMENTATION_THRESHOLD (=%ld) \n",FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_POWER_MODE))
-                Status = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&PowerMode, wrq->u.data.pointer, wrq->u.data.length);
-                if (PowerMode == Ndis802_11PowerModeCAM)
-                	Set_PSMode_Proc(pAdapter, "CAM");
-                else if (PowerMode == Ndis802_11PowerModeMAX_PSP)
-                	Set_PSMode_Proc(pAdapter, "Max_PSP");
-                else if (PowerMode == Ndis802_11PowerModeFast_PSP)
-					Set_PSMode_Proc(pAdapter, "Fast_PSP");
-                else if (PowerMode == Ndis802_11PowerModeLegacy_PSP)
-					Set_PSMode_Proc(pAdapter, "Legacy_PSP");
-                else
-                    Status = -EINVAL;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_POWER_MODE (=%d)\n",PowerMode));
-            break;
-         case RT_OID_802_11_TX_POWER_LEVEL_1:
-			if (wrq->u.data.length  < sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&PowerTemp, wrq->u.data.pointer, wrq->u.data.length);
-				if (PowerTemp > 100)
-					PowerTemp = 0xffffffff;  // AUTO
-				pAdapter->CommonCfg.TxPowerDefault = PowerTemp; //keep current setting.
-					pAdapter->CommonCfg.TxPowerPercentage = pAdapter->CommonCfg.TxPowerDefault;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			}
-	        break;
-		case OID_802_11_NETWORK_TYPE_IN_USE:
-			if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_TYPE))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&NetType, wrq->u.data.pointer, wrq->u.data.length);
-
-				if (NetType == Ndis802_11DS)
-					RTMPSetPhyMode(pAdapter, PHY_11B);
-				else if (NetType == Ndis802_11OFDM24)
-					RTMPSetPhyMode(pAdapter, PHY_11BG_MIXED);
-				else if (NetType == Ndis802_11OFDM5)
-					RTMPSetPhyMode(pAdapter, PHY_11A);
-				else
-					Status = -EINVAL;
-
-				if (Status == NDIS_STATUS_SUCCESS)
-					SetCommonHT(pAdapter);
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType));
-		    }
-			break;
-        // For WPA PSK PMK key
-        case RT_OID_802_11_ADD_WPA:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!!\n"));
-            }
-            else
-            {
-                if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
-				    (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone) )
-                {
-                    Status = -EOPNOTSUPP;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!! [AuthMode != WPAPSK/WPA2PSK/WPANONE]\n"));
-                }
-                else if ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
-						 (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) )     // Only for WPA PSK mode
-				{
-                    NdisMoveMemory(pAdapter->StaCfg.PMK, &pKey->KeyMaterial, pKey->KeyLength);
-                    // Use RaConfig as PSK agent.
-                    // Start STA supplicant state machine
-                    if (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
-                        pAdapter->StaCfg.WpaState = SS_START;
-
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-                else
-                {
-                    pAdapter->StaCfg.WpaState = SS_NOTUSE;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-                }
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_REMOVE_KEY:
-            pRemoveKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pRemoveKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-
-            Status = copy_from_user(pRemoveKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pRemoveKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!\n"));
-            }
-            else
-            {
-                if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
-                {
-                    RTMPWPARemoveKeyProc(pAdapter, pRemoveKey);
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Remove WPA Key!!\n"));
-                }
-                else
-                {
-                    KeyIdx = pRemoveKey->KeyIndex;
-
-                    if (KeyIdx & 0x80000000)
-                    {
-                        // Should never set default bit when remove key
-                        Status  = -EINVAL;
-                        DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(Should never set default bit when remove key)\n"));
-                    }
-                    else
-                    {
-                        KeyIdx = KeyIdx & 0x0fffffff;
-                        if (KeyIdx > 3)
-                        {
-                            Status  = -EINVAL;
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(KeyId[%d] out of range)\n", KeyIdx));
-                        }
-                        else
-                        {
-                            pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
-                            pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
-                            AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY (id=0x%x, Len=%d-byte)\n", pRemoveKey->KeyIndex, pRemoveKey->Length));
-                        }
-                    }
-                }
-            }
-            kfree(pRemoveKey);
-            break;
-        // New for WPA
-        case OID_802_11_ADD_KEY:
-            pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-            if(pKey == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (pKey->Length != wrq->u.data.length)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY, Failed!!\n"));
-            }
-            else
-            {
-                RTMPAddKey(pAdapter, pKey);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
-            }
-            kfree(pKey);
-            break;
-        case OID_802_11_CONFIGURATION:
-            if (wrq->u.data.length != sizeof(NDIS_802_11_CONFIGURATION))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&Config, wrq->u.data.pointer, wrq->u.data.length);
-                pConfig = &Config;
-
-                if ((pConfig->BeaconPeriod >= 20) && (pConfig->BeaconPeriod <=400))
-                     pAdapter->CommonCfg.BeaconPeriod = (USHORT) pConfig->BeaconPeriod;
-
-                pAdapter->StaActive.AtimWin = (USHORT) pConfig->ATIMWindow;
-                MAP_KHZ_TO_CHANNEL_ID(pConfig->DSConfig, pAdapter->CommonCfg.Channel);
-                //
-				// Save the channel on MlmeAux for CntlOidRTBssidProc used.
-				//
-				pAdapter->MlmeAux.Channel = pAdapter->CommonCfg.Channel;
-
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CONFIGURATION (BeacnPeriod=%ld,AtimW=%ld,Ch=%d)\n",
-                    pConfig->BeaconPeriod, pConfig->ATIMWindow, pAdapter->CommonCfg.Channel));
-                // Config has changed
-                pAdapter->bConfigChanged = TRUE;
-            }
-            break;
-		case RT_OID_802_11_SET_HT_PHYMODE:
-			if (wrq->u.data.length	!= sizeof(OID_SET_HT_PHYMODE))
-				Status = -EINVAL;
-			else
-			{
-			    POID_SET_HT_PHYMODE	pHTPhyMode = &HT_PhyMode;
-
-				Status = copy_from_user(&HT_PhyMode, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::pHTPhyMode	(PhyMode = %d,TransmitNo = %d, HtMode =	%d,	ExtOffset =	%d , MCS = %d, BW =	%d,	STBC = %d, SHORTGI = %d) \n",
-				pHTPhyMode->PhyMode, pHTPhyMode->TransmitNo,pHTPhyMode->HtMode,pHTPhyMode->ExtOffset,
-				pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC,	pHTPhyMode->SHORTGI));
-				if (pAdapter->CommonCfg.PhyMode	>= PHY_11ABGN_MIXED)
-					RTMPSetHT(pAdapter,	pHTPhyMode);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_HT_PHYMODE(MCS=%d,BW=%d,SGI=%d,STBC=%d)\n",
-				pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI,
-				pAdapter->StaCfg.HTPhyMode.field.STBC));
-			break;
-		case RT_OID_802_11_SET_APSD_SETTING:
-			if (wrq->u.data.length != sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				ULONG apsd ;
-				Status = copy_from_user(&apsd, wrq->u.data.pointer,	wrq->u.data.length);
-
-				/*-------------------------------------------------------------------
-				|B31~B7	|	B6~B5	 |	 B4	 |	 B3	 |	B2	 |	B1	 |	   B0		|
-				---------------------------------------------------------------------
-				| Rsvd	| Max SP Len | AC_VO | AC_VI | AC_BK | AC_BE | APSD	Capable	|
-				---------------------------------------------------------------------*/
-				pAdapter->CommonCfg.bAPSDCapable = (apsd & 0x00000001) ? TRUE :	FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BE = ((apsd	& 0x00000002) >> 1)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_BK = ((apsd	& 0x00000004) >> 2)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VI = ((apsd	& 0x00000008) >> 3)	? TRUE : FALSE;
-				pAdapter->CommonCfg.bAPSDAC_VO = ((apsd	& 0x00000010) >> 4)	? TRUE : FALSE;
-				pAdapter->CommonCfg.MaxSPLength	= (UCHAR)((apsd	& 0x00000060) >> 5);
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_SETTING (apsd=0x%lx, APSDCap=%d, [BE,BK,VI,VO]=[%d/%d/%d/%d],	MaxSPLen=%d)\n", apsd, pAdapter->CommonCfg.bAPSDCapable,
-					pAdapter->CommonCfg.bAPSDAC_BE,	pAdapter->CommonCfg.bAPSDAC_BK,	pAdapter->CommonCfg.bAPSDAC_VI,	pAdapter->CommonCfg.bAPSDAC_VO,	pAdapter->CommonCfg.MaxSPLength));
-			}
-			break;
-
-		case RT_OID_802_11_SET_APSD_PSM:
-			if (wrq->u.data.length	!= sizeof(ULONG))
-				Status = -EINVAL;
-			else
-			{
-				// Driver needs	to notify AP when PSM changes
-				Status = copy_from_user(&pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.pointer, wrq->u.data.length);
-				if (pAdapter->CommonCfg.bAPSDForcePowerSave	!= pAdapter->StaCfg.Psm)
-				{
-					MlmeSetPsmBit(pAdapter,	pAdapter->CommonCfg.bAPSDForcePowerSave);
-					RTMPSendNullFrame(pAdapter,	pAdapter->CommonCfg.TxRate,	TRUE);
-				}
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_PSM (bAPSDForcePowerSave:%d)\n",	pAdapter->CommonCfg.bAPSDForcePowerSave));
-			}
-			break;
-
-		case RT_OID_802_11_SET_WMM:
-			if (wrq->u.data.length	!= sizeof(BOOLEAN))
-				Status = -EINVAL;
-			else
-			{
-				Status = copy_from_user(&pAdapter->CommonCfg.bWmmCapable, wrq->u.data.pointer, wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_WMM (=%d)	\n", pAdapter->CommonCfg.bWmmCapable));
-			}
-			break;
-
-		case OID_802_11_DISASSOCIATE:
-			//
-			// Set NdisRadioStateOff to	TRUE, instead of called	MlmeRadioOff.
-			// Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be	0
-			// when	query OID_802_11_BSSID_LIST.
-			//
-			// TRUE:  NumberOfItems	will set to	0.
-			// FALSE: NumberOfItems	no change.
-			//
-			pAdapter->CommonCfg.NdisRadioStateOff =	TRUE;
-			// Set to immediately send the media disconnect	event
-			pAdapter->MlmeAux.CurrReqIsFromNdis	= TRUE;
-			DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DISASSOCIATE	\n"));
-
-			if (INFRA_ON(pAdapter))
-			{
-				if (pAdapter->Mlme.CntlMachine.CurrState !=	CNTL_IDLE)
-				{
-					RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
-					DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME	busy, reset	MLME state machine !!!\n"));
-				}
-
-				MlmeEnqueue(pAdapter,
-					MLME_CNTL_STATE_MACHINE,
-					OID_802_11_DISASSOCIATE,
-					0,
-					NULL);
-
-				StateMachineTouched	= TRUE;
-			}
-			break;
-		case RT_OID_802_11_SET_IMME_BA_CAP:
-				if (wrq->u.data.length != sizeof(OID_BACAP_STRUC))
-					Status = -EINVAL;
-				else
-				{
-					OID_BACAP_STRUC Orde ;
-					Status = copy_from_user(&Orde, wrq->u.data.pointer, wrq->u.data.length);
-					if (Orde.Policy > BA_NOTUSE)
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-					}
-					else if (Orde.Policy == BA_NOTUSE)
-					{
-						pAdapter->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs= Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-					}
-					else
-					{
-                        pAdapter->CommonCfg.BACapability.field.AutoBA = Orde.AutoBA;
-						pAdapter->CommonCfg.BACapability.field.Policy = IMMED_BA; // we only support immediate BA.
-						pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
-						pAdapter->CommonCfg.DesiredHtPhy.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-
-						// UPdata to HT IE
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
-						pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
-						pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-
-						if (pAdapter->CommonCfg.BACapability.field.RxBAWinLimit > MAX_RX_REORDERBUF)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = MAX_RX_REORDERBUF;
-
-					}
-
-					pAdapter->CommonCfg.REGBACapability.word = pAdapter->CommonCfg.BACapability.word;
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(Orde.AutoBA = %d) (Policy=%d)(ReBAWinLimit=%d)(TxBAWinLimit=%d)(AutoMode=%d)\n",Orde.AutoBA, pAdapter->CommonCfg.BACapability.field.Policy,
-						pAdapter->CommonCfg.BACapability.field.RxBAWinLimit,pAdapter->CommonCfg.BACapability.field.TxBAWinLimit, pAdapter->CommonCfg.BACapability.field.AutoBA));
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::(MimoPs = %d)(AmsduEnable = %d) (AmsduSize=%d)(MpduDensity=%d)\n",pAdapter->CommonCfg.DesiredHtPhy.MimoPs, pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable,
-						pAdapter->CommonCfg.DesiredHtPhy.AmsduSize, pAdapter->CommonCfg.DesiredHtPhy.MpduDensity));
-				}
-
-				break;
-		case RT_OID_802_11_ADD_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, (" Set :: RT_OID_802_11_ADD_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				UCHAR		        index;
-				OID_ADD_BA_ENTRY    BA;
-				MAC_TABLE_ENTRY     *pEntry;
-
-				Status = copy_from_user(&BA, wrq->u.data.pointer, wrq->u.data.length);
-				if (BA.TID > 15)
-				{
-					Status = NDIS_STATUS_INVALID_DATA;
-					break;
-				}
-				else
-				{
-					//BATableInsertEntry
-					//As ad-hoc mode, BA pair is not limited to only BSSID. so add via OID.
-					index = BA.TID;
-					// in ad hoc mode, when adding BA pair, we should insert this entry into MACEntry too
-					pEntry = MacTableLookup(pAdapter, BA.MACAddr);
-					if (!pEntry)
-					{
-						DBGPRINT(RT_DEBUG_TRACE, ("RT_OID_802_11_ADD_IMME_BA. break on no connection.----:%x:%x\n", BA.MACAddr[4], BA.MACAddr[5]));
-						break;
-					}
-					if (BA.IsRecipient == FALSE)
-					{
-					    if (pEntry->bIAmBadAtheros == TRUE)
-							pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = 0x10;
-
-						BAOriSessionSetUp(pAdapter, pEntry, index, 0, 100, TRUE);
-					}
-					else
-					{
-						//BATableInsertEntry(pAdapter, pEntry->Aid, BA.MACAddr, 0, 0xffff, BA.TID, BA.nMSDU, BA.IsRecipient);
-					}
-
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_IMME_BA. Rec = %d. Mac = %x:%x:%x:%x:%x:%x . \n",
-						BA.IsRecipient, BA.MACAddr[0], BA.MACAddr[1], BA.MACAddr[2], BA.MACAddr[2]
-						, BA.MACAddr[4], BA.MACAddr[5]));
-				}
-			}
-			break;
-
-		case RT_OID_802_11_TEAR_IMME_BA:
-			DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA \n"));
-			if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
-					Status = -EINVAL;
-			else
-			{
-				POID_ADD_BA_ENTRY	pBA;
-				MAC_TABLE_ENTRY *pEntry;
-
-				pBA = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-				if (pBA == NULL)
-				{
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA kmalloc() can't allocate enough memory\n"));
-					Status = NDIS_STATUS_FAILURE;
-				}
-				else
-				{
-					Status = copy_from_user(pBA, wrq->u.data.pointer, wrq->u.data.length);
-					DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA(TID=%d, bAllTid=%d)\n", pBA->TID, pBA->bAllTid));
-
-					if (!pBA->bAllTid && (pBA->TID > NUM_OF_TID))
-					{
-						Status = NDIS_STATUS_INVALID_DATA;
-						break;
-					}
-
-					if (pBA->IsRecipient == FALSE)
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						DBGPRINT(RT_DEBUG_TRACE, (" pBA->IsRecipient == FALSE\n"));
-						if (pEntry)
-						{
-							DBGPRINT(RT_DEBUG_TRACE, (" pBA->pEntry\n"));
-							BAOriSessionTearDown(pAdapter, pEntry->Aid, pBA->TID, FALSE, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					else
-					{
-						pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
-						if (pEntry)
-						{
-							BARecSessionTearDown( pAdapter, (UCHAR)pEntry->Aid, pBA->TID, TRUE);
-						}
-						else
-							DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
-					}
-					kfree(pBA);
-				}
-            }
-            break;
-        // For WPA_SUPPLICANT to set static wep key
-    	case OID_802_11_ADD_WEP:
-    	    pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-    	    if(pWepKey == NULL)
-            {
-                Status = -ENOMEM;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed!!\n"));
-                break;
-            }
-            Status = copy_from_user(pWepKey, wrq->u.data.pointer, wrq->u.data.length);
-            if (Status)
-            {
-                Status  = -EINVAL;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (length mismatch)!!\n"));
-            }
-            else
-            {
-		        KeyIdx = pWepKey->KeyIndex & 0x0fffffff;
-                // KeyIdx must be 0 ~ 3
-                if (KeyIdx > 4)
-    			{
-                    Status  = -EINVAL;
-                    DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (KeyIdx must be smaller than 4)!!\n"));
-                }
-                else
-                {
-                    UCHAR CipherAlg = 0;
-                    PUCHAR Key;
-
-                    // set key material and key length
-                    NdisZeroMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, 16);
-                    pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                    NdisMoveMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-
-                    switch(pWepKey->KeyLength)
-                    {
-                        case 5:
-                            CipherAlg = CIPHER_WEP64;
-                            break;
-                        case 13:
-                            CipherAlg = CIPHER_WEP128;
-                            break;
-                        default:
-                            DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, only support CIPHER_WEP64(len:5) & CIPHER_WEP128(len:13)!!\n"));
-                            Status = -EINVAL;
-                            break;
-                    }
-                    pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CipherAlg;
-
-                    // Default key for tx (shared key)
-                    if (pWepKey->KeyIndex & 0x80000000)
-                    {
-                        // set key material and key length
-                        NdisZeroMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, 16);
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
-                        NdisMoveMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-                        pAdapter->StaCfg.DesireSharedKeyId = KeyIdx;
-                        pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg;
-                        pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-                    }
-#ifndef RT30xx
-#ifdef RT2860
-					if ((pAdapter->StaCfg.WpaSupplicantUP != 0) &&
-#endif
-#ifdef RT2870
-					if ((pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
-#endif
-						(pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA))
-					{
-						Key = pWepKey->KeyMaterial;
-
-						// Set Group key material to Asic
-    					AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-						// Update WCID attribute table and IVEIV table for this group key table
-						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL);
-
-						STA_PORT_SECURED(pAdapter);
-
-        				// Indicate Connected for GUI
-        				pAdapter->IndicateMediaState = NdisMediaStateConnected;
-					}
-                    else if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
-#endif
-#ifdef RT30xx
-                    if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
-#endif
-                    {
-                        Key = pAdapter->SharedKey[BSS0][KeyIdx].Key;
-
-                        // Set key material and cipherAlg to Asic
-        				AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
-                        if (pWepKey->KeyIndex & 0x80000000)
-                        {
-                            PMAC_TABLE_ENTRY pEntry = &pAdapter->MacTab.Content[BSSID_WCID];
-                            // Assign group key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL);
-    						// Assign pairwise key info
-    						RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, pEntry);
-                        }
-                    }
-					DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP (id=0x%x, Len=%d-byte), %s\n", pWepKey->KeyIndex, pWepKey->KeyLength, (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) ? "Port Secured":"Port NOT Secured"));
-				}
-            }
-            kfree(pWepKey);
-            break;
-	    case OID_SET_COUNTERMEASURES:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.bBlockAssoc = TRUE;
-                else
-                    // WPA MIC error should block association attempt for 60 seconds
-                    pAdapter->StaCfg.bBlockAssoc = FALSE;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_SET_COUNTERMEASURES bBlockAssoc=%s\n", pAdapter->StaCfg.bBlockAssoc ? "TRUE":"FALSE"));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-			if (wrq->u.data.length != sizeof(UCHAR))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&wpa_supplicant_enable, wrq->u.data.pointer, wrq->u.data.length);
-    			pAdapter->StaCfg.WpaSupplicantUP = wpa_supplicant_enable;
-    			DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-			}
-            break;
-        case OID_802_11_DEAUTHENTICATION:
-            if (wrq->u.data.length != sizeof(MLME_DEAUTH_REQ_STRUCT))
-                Status  = -EINVAL;
-            else
-            {
-                MLME_DEAUTH_REQ_STRUCT      *pInfo;
-				MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
-                pInfo = (MLME_DEAUTH_REQ_STRUCT *) MsgElem->Msg;
-                Status = copy_from_user(pInfo, wrq->u.data.pointer, wrq->u.data.length);
-                MlmeDeauthReqAction(pAdapter, MsgElem);
-				kfree(MsgElem);
-
-                if (INFRA_ON(pAdapter))
-                {
-                    LinkDown(pAdapter, FALSE);
-                    pAdapter->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
-                }
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DEAUTHENTICATION (Reason=%d)\n", pInfo->Reason));
-            }
-            break;
-        case OID_802_11_DROP_UNENCRYPTED:
-            if (wrq->u.data.length != sizeof(int))
-                Status  = -EINVAL;
-            else
-            {
-                int enabled = 0;
-                Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
-                if (enabled == 1)
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-                else
-                    pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
-				NdisAcquireSpinLock(&pAdapter->MacTabLock);
-				pAdapter->MacTab.Content[BSSID_WCID].PortSecured = pAdapter->StaCfg.PortSecured;
-				NdisReleaseSpinLock(&pAdapter->MacTabLock);
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DROP_UNENCRYPTED (=%d)\n", enabled));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X:
-            if (wrq->u.data.length != sizeof(BOOLEAN))
-                Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021xState, wrq->u.data.pointer, wrq->u.data.length);
-		        pAdapter->StaCfg.IEEE8021X = IEEE8021xState;
-                DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X (=%d)\n", IEEE8021xState));
-            }
-            break;
-        case OID_802_11_SET_IEEE8021X_REQUIRE_KEY:
-			if (wrq->u.data.length != sizeof(BOOLEAN))
-				 Status  = -EINVAL;
-            else
-            {
-                Status = copy_from_user(&IEEE8021x_required_keys, wrq->u.data.pointer, wrq->u.data.length);
-				pAdapter->StaCfg.IEEE8021x_required_keys = IEEE8021x_required_keys;
-				DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X_REQUIRE_KEY (%d)\n", IEEE8021x_required_keys));
-			}
-			break;
-        case OID_802_11_PMKID:
-	        pPmkId = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
-	        if(pPmkId == NULL) {
-                Status = -ENOMEM;
-                break;
-            }
-            Status = copy_from_user(pPmkId, wrq->u.data.pointer, wrq->u.data.length);
-
-	        // check the PMKID information
-	        if (pPmkId->BSSIDInfoCount == 0)
-                NdisZeroMemory(pAdapter->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
-	        else
-	        {
-		        PBSSID_INFO	pBssIdInfo;
-		        UINT		BssIdx;
-		        UINT		CachedIdx;
-
-		        for (BssIdx = 0; BssIdx < pPmkId->BSSIDInfoCount; BssIdx++)
-		        {
-			        // point to the indexed BSSID_INFO structure
-			        pBssIdInfo = (PBSSID_INFO) ((PUCHAR) pPmkId + 2 * sizeof(UINT) + BssIdx * sizeof(BSSID_INFO));
-			        // Find the entry in the saved data base.
-			        for (CachedIdx = 0; CachedIdx < pAdapter->StaCfg.SavedPMKNum; CachedIdx++)
-			        {
-				        // compare the BSSID
-				        if (NdisEqualMemory(pBssIdInfo->BSSID, pAdapter->StaCfg.SavedPMK[CachedIdx].BSSID, sizeof(NDIS_802_11_MAC_ADDRESS)))
-					        break;
-			        }
-
-			        // Found, replace it
-			        if (CachedIdx < PMKID_NO)
-			        {
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-				        pAdapter->StaCfg.SavedPMKNum++;
-			        }
-			        // Not found, replace the last one
-			        else
-			        {
-				        // Randomly replace one
-				        CachedIdx = (pBssIdInfo->BSSID[5] % PMKID_NO);
-				        DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
-				        NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
-			        }
-		        }
-			}
-			if(pPmkId)
-				kfree(pPmkId);
-	        break;
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Set::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-
-
-    return Status;
-}
-
-INT RTMPQueryInformation(
-    IN  PRTMP_ADAPTER pAdapter,
-    IN  OUT struct ifreq    *rq,
-    IN  INT                 cmd)
-{
-    struct iwreq                        *wrq = (struct iwreq *) rq;
-    NDIS_802_11_BSSID_LIST_EX           *pBssidList = NULL;
-    PNDIS_WLAN_BSSID_EX                 pBss;
-    NDIS_802_11_SSID                    Ssid;
-    NDIS_802_11_CONFIGURATION           *pConfiguration = NULL;
-    RT_802_11_LINK_STATUS               *pLinkStatus = NULL;
-    RT_802_11_STA_CONFIG                *pStaConfig = NULL;
-    NDIS_802_11_STATISTICS              *pStatistics = NULL;
-    NDIS_802_11_RTS_THRESHOLD           RtsThresh;
-    NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-    NDIS_802_11_POWER_MODE              PowerMode;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  BssType;
-    RT_802_11_PREAMBLE                  PreamType;
-    NDIS_802_11_AUTHENTICATION_MODE     AuthMode;
-    NDIS_802_11_WEP_STATUS              WepStatus;
-    NDIS_MEDIA_STATE                    MediaState;
-    ULONG                               BssBufSize, ulInfo=0, NetworkTypeList[4], apsd = 0;
-    USHORT                              BssLen = 0;
-    PUCHAR                              pBuf = NULL, pPtr;
-    INT                                 Status = NDIS_STATUS_SUCCESS;
-    UINT                                we_version_compiled;
-    UCHAR                               i, Padding = 0;
-    BOOLEAN                             RadioState;
-	UCHAR	driverVersion[8];
-    OID_SET_HT_PHYMODE			        *pHTPhyMode = NULL;
-
-    switch(cmd)
-    {
-        case RT_OID_DEVICE_NAME:
-            wrq->u.data.length = sizeof(STA_NIC_DEVICE_NAME);
-            Status = copy_to_user(wrq->u.data.pointer, STA_NIC_DEVICE_NAME, wrq->u.data.length);
-            break;
-        case RT_OID_VERSION_INFO:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_VERSION_INFO \n"));
-			wrq->u.data.length = 8*sizeof(UCHAR);
-			sprintf(&driverVersion[0], "%s", STA_DRIVER_VERSION);
-			driverVersion[7] = '\0';
-			if (copy_to_user(wrq->u.data.pointer, &driverVersion, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_BSSID_LIST:
-            if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
-            {
-            	/*
-            	 * Still scanning, indicate the caller should try again.
-            	 */
-            	DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (Still scanning)\n"));
-				return -EAGAIN;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (%d BSS returned)\n",pAdapter->ScanTab.BssNr));
-			pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-            // Claculate total buffer size required
-            BssBufSize = sizeof(ULONG);
-
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                // Align pointer to 4 bytes boundary.
-                //Padding = 4 - (pAdapter->ScanTab.BssEntry[i].VarIELen & 0x0003);
-                //if (Padding == 4)
-                //    Padding = 0;
-                BssBufSize += (sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-            }
-
-            // For safety issue, we add 256 bytes just in case
-            BssBufSize += 256;
-            // Allocate the same size as passed from higher layer
-            pBuf = kmalloc(BssBufSize, MEM_ALLOC_FLAG);
-            if(pBuf == NULL)
-            {
-                Status = -ENOMEM;
-                break;
-            }
-            // Init 802_11_BSSID_LIST_EX structure
-            NdisZeroMemory(pBuf, BssBufSize);
-            pBssidList = (PNDIS_802_11_BSSID_LIST_EX) pBuf;
-            pBssidList->NumberOfItems = pAdapter->ScanTab.BssNr;
-
-            // Calculate total buffer length
-            BssLen = 4; // Consist of NumberOfItems
-            // Point to start of NDIS_WLAN_BSSID_EX
-            // pPtr = pBuf + sizeof(ULONG);
-            pPtr = (PUCHAR) &pBssidList->Bssid[0];
-            for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
-            {
-                pBss = (PNDIS_WLAN_BSSID_EX) pPtr;
-                NdisMoveMemory(&pBss->MacAddress, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
-                if ((pAdapter->ScanTab.BssEntry[i].Hidden == 1) && (pAdapter->StaCfg.bShowHiddenSSID == FALSE))
-                {
-                    //
-					// We must return this SSID during 4way handshaking, otherwise Aegis will failed to parse WPA infomation
-					// and then failed to send EAPOl farame.
-					//
-					if ((pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) && (pAdapter->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
-					{
-						pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-						NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-					}
-					else
-                    	pBss->Ssid.SsidLength = 0;
-                }
-                else
-                {
-                    pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
-                    NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
-                }
-                pBss->Privacy = pAdapter->ScanTab.BssEntry[i].Privacy;
-                pBss->Rssi = pAdapter->ScanTab.BssEntry[i].Rssi - pAdapter->BbpRssiToDbmDelta;
-                pBss->NetworkTypeInUse = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]);
-                pBss->Configuration.Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pBss->Configuration.BeaconPeriod = pAdapter->ScanTab.BssEntry[i].BeaconPeriod;
-                pBss->Configuration.ATIMWindow = pAdapter->ScanTab.BssEntry[i].AtimWin;
-
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->ScanTab.BssEntry[i].Channel, pBss->Configuration.DSConfig);
-
-                if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_INFRA)
-                    pBss->InfrastructureMode = Ndis802_11Infrastructure;
-                else
-                    pBss->InfrastructureMode = Ndis802_11IBSS;
-
-                NdisMoveMemory(pBss->SupportedRates, pAdapter->ScanTab.BssEntry[i].SupRate, pAdapter->ScanTab.BssEntry[i].SupRateLen);
-                NdisMoveMemory(pBss->SupportedRates + pAdapter->ScanTab.BssEntry[i].SupRateLen,
-                               pAdapter->ScanTab.BssEntry[i].ExtRate,
-                               pAdapter->ScanTab.BssEntry[i].ExtRateLen);
-
-                if (pAdapter->ScanTab.BssEntry[i].VarIELen == 0)
-                {
-                    pBss->IELength = sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                }
-                else
-                {
-                    pBss->IELength = (ULONG)(sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
-                    NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
-                    NdisMoveMemory(pBss->IEs + sizeof(NDIS_802_11_FIXED_IEs), pAdapter->ScanTab.BssEntry[i].VarIEs, pAdapter->ScanTab.BssEntry[i].VarIELen);
-                    pPtr += pAdapter->ScanTab.BssEntry[i].VarIELen;
-                }
-                pBss->Length = (ULONG)(sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-
-                BssLen += pBss->Length;
-            }
-
-            if (BssLen > wrq->u.data.length)
-            {
-                kfree(pBssidList);
-                return -E2BIG;
-            }
-            else
-                wrq->u.data.length = BssLen;
-            Status = copy_to_user(wrq->u.data.pointer, pBssidList, BssLen);
-            kfree(pBssidList);
-            break;
-        case OID_802_3_CURRENT_ADDRESS:
-            wrq->u.data.length = MAC_ADDR_LEN;
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
-            break;
-        case OID_GEN_MEDIA_CONNECT_STATUS:
-            if (pAdapter->IndicateMediaState == NdisMediaStateConnected)
-                MediaState = NdisMediaStateConnected;
-            else
-                MediaState = NdisMediaStateDisconnected;
-
-            wrq->u.data.length = sizeof(NDIS_MEDIA_STATE);
-            Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
-            break;
-        case OID_802_11_BSSID:
-            if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
-            {
-                Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
-
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID(=EMPTY)\n"));
-                Status = -ENOTCONN;
-            }
-            break;
-        case OID_802_11_SSID:
-			NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
-			NdisZeroMemory(Ssid.Ssid, MAX_LEN_OF_SSID);
-            Ssid.SsidLength = pAdapter->CommonCfg.SsidLen;
-			memcpy(Ssid.Ssid, pAdapter->CommonCfg.Ssid,	Ssid.SsidLength);
-            wrq->u.data.length = sizeof(NDIS_802_11_SSID);
-            Status = copy_to_user(wrq->u.data.pointer, &Ssid, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SSID (Len=%d, ssid=%s)\n", Ssid.SsidLength,Ssid.Ssid));
-            break;
-        case RT_OID_802_11_QUERY_LINK_STATUS:
-            pLinkStatus = (RT_802_11_LINK_STATUS *) kmalloc(sizeof(RT_802_11_LINK_STATUS), MEM_ALLOC_FLAG);
-            if (pLinkStatus)
-            {
-                pLinkStatus->CurrTxRate = RateIdTo500Kbps[pAdapter->CommonCfg.TxRate];   // unit : 500 kbps
-                pLinkStatus->ChannelQuality = pAdapter->Mlme.ChannelQuality;
-                pLinkStatus->RxByteCount = pAdapter->RalinkCounters.ReceivedByteCount;
-                pLinkStatus->TxByteCount = pAdapter->RalinkCounters.TransmittedByteCount;
-        		pLinkStatus->CentralChannel = pAdapter->CommonCfg.CentralChannel;
-                wrq->u.data.length = sizeof(RT_802_11_LINK_STATUS);
-                Status = copy_to_user(wrq->u.data.pointer, pLinkStatus, wrq->u.data.length);
-                kfree(pLinkStatus);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS\n"));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_CONFIGURATION:
-            pConfiguration = (NDIS_802_11_CONFIGURATION *) kmalloc(sizeof(NDIS_802_11_CONFIGURATION), MEM_ALLOC_FLAG);
-            if (pConfiguration)
-            {
-                pConfiguration->Length = sizeof(NDIS_802_11_CONFIGURATION);
-                pConfiguration->BeaconPeriod = pAdapter->CommonCfg.BeaconPeriod;
-                pConfiguration->ATIMWindow = pAdapter->StaActive.AtimWin;
-                MAP_CHANNEL_ID_TO_KHZ(pAdapter->CommonCfg.Channel, pConfiguration->DSConfig);
-                wrq->u.data.length = sizeof(NDIS_802_11_CONFIGURATION);
-                Status = copy_to_user(wrq->u.data.pointer, pConfiguration, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(BeaconPeriod=%ld,AtimW=%ld,Channel=%d) \n",
-                                        pConfiguration->BeaconPeriod, pConfiguration->ATIMWindow, pAdapter->CommonCfg.Channel));
-				kfree(pConfiguration);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-		case RT_OID_802_11_SNR_0:
-			if ((pAdapter->StaCfg.LastSNR0 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR0) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_SNR_0(0x=%lx)\n", ulInfo));
-			}
-            else
-			    Status = -EFAULT;
-			break;
-		case RT_OID_802_11_SNR_1:
-			if ((pAdapter->Antenna.field.RxPath	> 1) &&
-                (pAdapter->StaCfg.LastSNR1 > 0))
-			{
-				ulInfo = ((0xeb	- pAdapter->StaCfg.LastSNR1) * 3) /	16 ;
-				wrq->u.data.length = sizeof(ulInfo);
-				Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-				DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(0x=%lx)\n",ulInfo));
-			}
-			else
-				Status = -EFAULT;
-            DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(pAdapter->StaCfg.LastSNR1=%d)\n",pAdapter->StaCfg.LastSNR1));
-			break;
-        case OID_802_11_RSSI_TRIGGER:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0 - pAdapter->BbpRssiToDbmDelta;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RSSI_TRIGGER(=%ld)\n", ulInfo));
-            break;
-		case OID_802_11_RSSI:
-        case RT_OID_802_11_RSSI:
-			ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-		case RT_OID_802_11_RSSI_1:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi1;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case RT_OID_802_11_RSSI_2:
-            ulInfo = pAdapter->StaCfg.RssiSample.LastRssi2;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			break;
-        case OID_802_11_STATISTICS:
-            pStatistics = (NDIS_802_11_STATISTICS *) kmalloc(sizeof(NDIS_802_11_STATISTICS), MEM_ALLOC_FLAG);
-            if (pStatistics)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS \n"));
-                // add the most up-to-date h/w raw counters into software counters
-			    NICUpdateRawCounters(pAdapter);
-
-                // Sanity check for calculation of sucessful count
-                if (pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart < pAdapter->WlanCounters.RetryCount.QuadPart)
-                    pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-
-                pStatistics->TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart;
-                pStatistics->MulticastTransmittedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastTransmittedFrameCount.QuadPart;
-                pStatistics->FailedCount.QuadPart = pAdapter->WlanCounters.FailedCount.QuadPart;
-                pStatistics->RetryCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-                pStatistics->MultipleRetryCount.QuadPart = pAdapter->WlanCounters.MultipleRetryCount.QuadPart;
-                pStatistics->RTSSuccessCount.QuadPart = pAdapter->WlanCounters.RTSSuccessCount.QuadPart;
-                pStatistics->RTSFailureCount.QuadPart = pAdapter->WlanCounters.RTSFailureCount.QuadPart;
-                pStatistics->ACKFailureCount.QuadPart = pAdapter->WlanCounters.ACKFailureCount.QuadPart;
-                pStatistics->FrameDuplicateCount.QuadPart = pAdapter->WlanCounters.FrameDuplicateCount.QuadPart;
-                pStatistics->ReceivedFragmentCount.QuadPart = pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart;
-                pStatistics->MulticastReceivedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastReceivedFrameCount.QuadPart;
-#ifdef DBG
-                pStatistics->FCSErrorCount = pAdapter->RalinkCounters.RealFcsErrCount;
-#else
-                pStatistics->FCSErrorCount.QuadPart = pAdapter->WlanCounters.FCSErrorCount.QuadPart;
-                pStatistics->FrameDuplicateCount.u.LowPart = pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart / 100;
-#endif
-                wrq->u.data.length = sizeof(NDIS_802_11_STATISTICS);
-                Status = copy_to_user(wrq->u.data.pointer, pStatistics, wrq->u.data.length);
-                kfree(pStatistics);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_GEN_RCV_OK:
-            ulInfo = pAdapter->Counters8023.GoodReceives;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case OID_GEN_RCV_NO_BUFFER:
-            ulInfo = pAdapter->Counters8023.RxNoBuffer;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_PHY_MODE:
-            ulInfo = (ULONG)pAdapter->CommonCfg.PhyMode;
-            wrq->u.data.length = sizeof(ulInfo);
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PHY_MODE (=%ld)\n", ulInfo));
-            break;
-        case RT_OID_802_11_STA_CONFIG:
-            pStaConfig = (RT_802_11_STA_CONFIG *) kmalloc(sizeof(RT_802_11_STA_CONFIG), MEM_ALLOC_FLAG);
-            if (pStaConfig)
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG\n"));
-                pStaConfig->EnableTxBurst = pAdapter->CommonCfg.bEnableTxBurst;
-                pStaConfig->EnableTurboRate = 0;
-                pStaConfig->UseBGProtection = pAdapter->CommonCfg.UseBGProtection;
-                pStaConfig->UseShortSlotTime = pAdapter->CommonCfg.bUseShortSlotTime;
-                //pStaConfig->AdhocMode = pAdapter->StaCfg.AdhocMode;
-                pStaConfig->HwRadioStatus = (pAdapter->StaCfg.bHwRadio == TRUE) ? 1 : 0;
-                pStaConfig->Rsv1 = 0;
-                pStaConfig->SystemErrorBitmap = pAdapter->SystemErrorBitmap;
-                wrq->u.data.length = sizeof(RT_802_11_STA_CONFIG);
-                Status = copy_to_user(wrq->u.data.pointer, pStaConfig, wrq->u.data.length);
-                kfree(pStaConfig);
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case OID_802_11_RTS_THRESHOLD:
-            RtsThresh = pAdapter->CommonCfg.RtsThreshold;
-            wrq->u.data.length = sizeof(RtsThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &RtsThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RTS_THRESHOLD(=%ld)\n", RtsThresh));
-            break;
-        case OID_802_11_FRAGMENTATION_THRESHOLD:
-            FragThresh = pAdapter->CommonCfg.FragmentThreshold;
-            if (pAdapter->CommonCfg.bUseZeroToDisableFragment == TRUE)
-                FragThresh = 0;
-            wrq->u.data.length = sizeof(FragThresh);
-            Status = copy_to_user(wrq->u.data.pointer, &FragThresh, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_FRAGMENTATION_THRESHOLD(=%ld)\n", FragThresh));
-            break;
-        case OID_802_11_POWER_MODE:
-            PowerMode = pAdapter->StaCfg.WindowsPowerMode;
-            wrq->u.data.length = sizeof(PowerMode);
-            Status = copy_to_user(wrq->u.data.pointer, &PowerMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_POWER_MODE(=%d)\n", PowerMode));
-            break;
-        case RT_OID_802_11_RADIO:
-            RadioState = (BOOLEAN) pAdapter->StaCfg.bSwRadio;
-            wrq->u.data.length = sizeof(RadioState);
-            Status = copy_to_user(wrq->u.data.pointer, &RadioState, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_RADIO (=%d)\n", RadioState));
-            break;
-        case OID_802_11_INFRASTRUCTURE_MODE:
-            if (pAdapter->StaCfg.BssType == BSS_ADHOC)
-                BssType = Ndis802_11IBSS;
-            else if (pAdapter->StaCfg.BssType == BSS_INFRA)
-                BssType = Ndis802_11Infrastructure;
-            else if (pAdapter->StaCfg.BssType == BSS_MONITOR)
-                BssType = Ndis802_11Monitor;
-            else
-                BssType = Ndis802_11AutoUnknown;
-
-            wrq->u.data.length = sizeof(BssType);
-            Status = copy_to_user(wrq->u.data.pointer, &BssType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_INFRASTRUCTURE_MODE(=%d)\n", BssType));
-            break;
-        case RT_OID_802_11_PREAMBLE:
-            PreamType = pAdapter->CommonCfg.TxPreamble;
-            wrq->u.data.length = sizeof(PreamType);
-            Status = copy_to_user(wrq->u.data.pointer, &PreamType, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PREAMBLE(=%d)\n", PreamType));
-            break;
-        case OID_802_11_AUTHENTICATION_MODE:
-            AuthMode = pAdapter->StaCfg.AuthMode;
-            wrq->u.data.length = sizeof(AuthMode);
-            Status = copy_to_user(wrq->u.data.pointer, &AuthMode, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_AUTHENTICATION_MODE(=%d)\n", AuthMode));
-            break;
-        case OID_802_11_WEP_STATUS:
-            WepStatus = pAdapter->StaCfg.WepStatus;
-            wrq->u.data.length = sizeof(WepStatus);
-            Status = copy_to_user(wrq->u.data.pointer, &WepStatus, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEP_STATUS(=%d)\n", WepStatus));
-            break;
-        case OID_802_11_TX_POWER_LEVEL:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPower, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_TX_POWER_LEVEL %x\n",pAdapter->CommonCfg.TxPower));
-			break;
-        case RT_OID_802_11_TX_POWER_LEVEL_1:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPowerPercentage, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
-			break;
-        case OID_802_11_NETWORK_TYPES_SUPPORTED:
-			if ((pAdapter->RfIcType	== RFIC_2850) || (pAdapter->RfIcType ==	RFIC_2750))
-			{
-				NetworkTypeList[0] = 3;                 // NumberOfItems = 3
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-				NetworkTypeList[3] = Ndis802_11OFDM5;   // NetworkType[3] = 11a
-                wrq->u.data.length = 16;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			else
-			{
-				NetworkTypeList[0] = 2;                 // NumberOfItems = 2
-				NetworkTypeList[1] = Ndis802_11DS;      // NetworkType[1] = 11b
-				NetworkTypeList[2] = Ndis802_11OFDM24;  // NetworkType[2] = 11g
-			    wrq->u.data.length = 12;
-				Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
-			}
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_NETWORK_TYPES_SUPPORTED\n"));
-				break;
-	    case OID_802_11_NETWORK_TYPE_IN_USE:
-            wrq->u.data.length = sizeof(ULONG);
-			if (pAdapter->CommonCfg.PhyMode == PHY_11A)
-				ulInfo = Ndis802_11OFDM5;
-			else if ((pAdapter->CommonCfg.PhyMode == PHY_11BG_MIXED) || (pAdapter->CommonCfg.PhyMode == PHY_11G))
-				ulInfo = Ndis802_11OFDM24;
-			else
-				ulInfo = Ndis802_11DS;
-            Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			break;
-        case RT_OID_802_11_QUERY_LAST_RX_RATE:
-            ulInfo = (ULONG)pAdapter->LastRxRate;
-            wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_RX_RATE (=%ld)\n", ulInfo));
-			break;
-		case RT_OID_802_11_QUERY_LAST_TX_RATE:
-			//ulInfo = (ULONG)pAdapter->LastTxRate;
-			ulInfo = (ULONG)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-			wrq->u.data.length = sizeof(ulInfo);
-			Status = copy_to_user(wrq->u.data.pointer, &ulInfo,	wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_TX_RATE (=%lx)\n", ulInfo));
-			break;
-        case RT_OID_802_11_QUERY_EEPROM_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->EepromVersion, wrq->u.data.length);
-            break;
-        case RT_OID_802_11_QUERY_FIRMWARE_VERSION:
-            wrq->u.data.length = sizeof(ULONG);
-            Status = copy_to_user(wrq->u.data.pointer, &pAdapter->FirmwareVersion, wrq->u.data.length);
-			break;
-	    case RT_OID_802_11_QUERY_NOISE_LEVEL:
-			wrq->u.data.length = sizeof(UCHAR);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->BbpWriteLatch[66], wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_NOISE_LEVEL (=%d)\n", pAdapter->BbpWriteLatch[66]));
-			break;
-	    case RT_OID_802_11_EXTRA_INFO:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->ExtraInfo, wrq->u.data.length);
-	        DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_EXTRA_INFO (=%ld)\n", pAdapter->ExtraInfo));
-	        break;
-	    case RT_OID_WE_VERSION_COMPILED:
-	        wrq->u.data.length = sizeof(UINT);
-	        we_version_compiled = WIRELESS_EXT;
-	        Status = copy_to_user(wrq->u.data.pointer, &we_version_compiled, wrq->u.data.length);
-	        break;
-		case RT_OID_802_11_QUERY_APSD_SETTING:
-			apsd = (pAdapter->CommonCfg.bAPSDCapable | (pAdapter->CommonCfg.bAPSDAC_BE << 1) | (pAdapter->CommonCfg.bAPSDAC_BK << 2)
-				| (pAdapter->CommonCfg.bAPSDAC_VI << 3)	| (pAdapter->CommonCfg.bAPSDAC_VO << 4)	| (pAdapter->CommonCfg.MaxSPLength << 5));
-
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &apsd, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_SETTING (=0x%lx,APSDCap=%d,AC_BE=%d,AC_BK=%d,AC_VI=%d,AC_VO=%d,MAXSPLen=%d)\n",
-				apsd,pAdapter->CommonCfg.bAPSDCapable,pAdapter->CommonCfg.bAPSDAC_BE,pAdapter->CommonCfg.bAPSDAC_BK,pAdapter->CommonCfg.bAPSDAC_VI,pAdapter->CommonCfg.bAPSDAC_VO,pAdapter->CommonCfg.MaxSPLength));
-			break;
-		case RT_OID_802_11_QUERY_APSD_PSM:
-			wrq->u.data.length = sizeof(ULONG);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_PSM (=%d)\n", pAdapter->CommonCfg.bAPSDForcePowerSave));
-			break;
-		case RT_OID_802_11_QUERY_WMM:
-			wrq->u.data.length = sizeof(BOOLEAN);
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bWmmCapable, wrq->u.data.length);
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_WMM (=%d)\n",	pAdapter->CommonCfg.bWmmCapable));
-			break;
-        case RT_OID_NEW_DRIVER:
-            {
-                UCHAR enabled = 1;
-    	        wrq->u.data.length = sizeof(UCHAR);
-    	        Status = copy_to_user(wrq->u.data.pointer, &enabled, wrq->u.data.length);
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_NEW_DRIVER (=%d)\n", enabled));
-            }
-	        break;
-        case RT_OID_WPA_SUPPLICANT_SUPPORT:
-	        wrq->u.data.length = sizeof(UCHAR);
-	        Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.WpaSupplicantUP, wrq->u.data.length);
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
-	        break;
-        case RT_OID_DRIVER_DEVICE_NAME:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_DRIVER_DEVICE_NAME \n"));
-			wrq->u.data.length = 16;
-			if (copy_to_user(wrq->u.data.pointer, pAdapter->StaCfg.dev_name, wrq->u.data.length))
-			{
-				Status = -EFAULT;
-			}
-            break;
-        case RT_OID_802_11_QUERY_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC;
-
-    			pHTPhyMode->ExtOffset = ((pAdapter->CommonCfg.CentralChannel < pAdapter->CommonCfg.Channel) ? (EXTCHA_BELOW) : (EXTCHA_ABOVE));
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_COUNTRY_REGION:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_COUNTRY_REGION \n"));
-			wrq->u.data.length = sizeof(ulInfo);
-            ulInfo = pAdapter->CommonCfg.CountryRegionForABand;
-            ulInfo = (ulInfo << 8)|(pAdapter->CommonCfg.CountryRegion);
-			if (copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            break;
-        case RT_OID_802_11_QUERY_DAT_HT_PHYMODE:
-            pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
-            if (pHTPhyMode)
-            {
-                pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
-    			pHTPhyMode->HtMode = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.HTMODE;
-    			pHTPhyMode->BW = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.BW;
-    			pHTPhyMode->MCS= (UCHAR)pAdapter->StaCfg.DesiredTransmitSetting.field.MCS;
-    			pHTPhyMode->SHORTGI= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.ShortGI;
-    			pHTPhyMode->STBC= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.STBC;
-
-                wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
-                if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
-    			{
-    				Status = -EFAULT;
-    			}
-    			DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
-    				pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
-    			DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
-            }
-            else
-            {
-                DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
-                Status = -EFAULT;
-            }
-            break;
-        case RT_OID_QUERY_MULTIPLE_CARD_SUPPORT:
-			wrq->u.data.length = sizeof(UCHAR);
-            i = 0;
-			if (copy_to_user(wrq->u.data.pointer, &i, wrq->u.data.length))
-            {
-				Status = -EFAULT;
-            }
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_QUERY_MULTIPLE_CARD_SUPPORT(=%d) \n", i));
-            break;
-
-		case OID_802_11_BUILD_CHANNEL_EX:
-			{
-				UCHAR value;
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BUILD_CHANNEL_EX \n"));
-				wrq->u.data.length = sizeof(UCHAR);
-				DBGPRINT(RT_DEBUG_TRACE, ("Doesn't support EXT_BUILD_CHANNEL_LIST.\n"));
-				value = 0;
-				Status = copy_to_user(wrq->u.data.pointer, &value, 1);
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			}
-			break;
-
-		case OID_802_11_GET_CH_LIST:
-			{
-				PRT_CHANNEL_LIST_INFO pChListBuf;
-
-				DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CH_LIST \n"));
-				if (pAdapter->ChannelListNum == 0)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf = (RT_CHANNEL_LIST_INFO *) kmalloc(sizeof(RT_CHANNEL_LIST_INFO), MEM_ALLOC_FLAG);
-				if (pChListBuf == NULL)
-				{
-					wrq->u.data.length = 0;
-					break;
-				}
-
-				pChListBuf->ChannelListNum = pAdapter->ChannelListNum;
-				for (i = 0; i < pChListBuf->ChannelListNum; i++)
-					pChListBuf->ChannelList[i] = pAdapter->ChannelList[i].Channel;
-
-				wrq->u.data.length = sizeof(RT_CHANNEL_LIST_INFO);
-				Status = copy_to_user(wrq->u.data.pointer, pChListBuf, sizeof(RT_CHANNEL_LIST_INFO));
-				DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-
-				if (pChListBuf)
-					kfree(pChListBuf);
-			}
-			break;
-
-		case OID_802_11_GET_COUNTRY_CODE:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_COUNTRY_CODE \n"));
-			wrq->u.data.length = 2;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.CountryCode, 2);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-		case OID_802_11_GET_CHANNEL_GEOGRAPHY:
-			DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CHANNEL_GEOGRAPHY \n"));
-			wrq->u.data.length = 1;
-			Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Geography, 1);
-			DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-			break;
-
-        default:
-            DBGPRINT(RT_DEBUG_TRACE, ("Query::unknown IOCTL's subcmd = 0x%08x\n", cmd));
-            Status = -EOPNOTSUPP;
-            break;
-    }
-    return Status;
-}
-
 INT rt28xx_sta_ioctl(
 	IN	struct net_device	*net_dev,
 	IN	OUT	struct ifreq	*rq,
@@ -4588,7 +2750,6 @@ INT rt28xx_sta_ioctl(
 	struct iwreq        *wrq = (struct iwreq *) rq;
 	BOOLEAN				StateMachineTouched = FALSE;
 	INT					Status = NDIS_STATUS_SUCCESS;
-	USHORT				subcmd;
 
     //check if the interface is down
     if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
@@ -4733,17 +2894,9 @@ INT rt28xx_sta_ioctl(
 		case SIOCGIWRANGE:	//Get range of parameters
 		case SIOCGIWRETRY:	//get retry limits and lifetime
 		case SIOCSIWRETRY:	//set retry limits and lifetime
-			Status = -EOPNOTSUPP;
-			break;
 		case RT_PRIV_IOCTL:
-#ifdef RT30xx
-        case RT_PRIV_IOCTL_EXT:
-#endif
-			subcmd = wrq->u.data.flags;
-			if( subcmd & OID_GET_SET_TOGGLE)
-				Status = RTMPSetInformation(pAd, rq, subcmd);
-			else
-				Status = RTMPQueryInformation(pAd, rq, subcmd);
+		case RT_PRIV_IOCTL_EXT:
+			Status = -EOPNOTSUPP;
 			break;
 		case SIOCGIWPRIV:
 			if (wrq->u.data.pointer)

  parent reply	other threads:[~2009-08-16 19:32 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-16 19:29 [PATCH 00/22] Staging: rt{286,287,307}0: various fixes/cleanups Bartlomiej Zolnierkiewicz
2009-08-16 19:29 ` [PATCH 01/22] Staging: rt2870: duplicated code is executed twice in AsicEvaluateRxAnt() Bartlomiej Zolnierkiewicz
2009-08-16 19:29 ` [PATCH 02/22] Staging: rt3070: fix build warnings Bartlomiej Zolnierkiewicz
2009-08-16 19:29 ` [PATCH 03/22] Staging: rtxxx0: remove support for older wireless extensions Bartlomiej Zolnierkiewicz
2009-08-16 19:29 ` [PATCH 04/22] Staging: rtxxx0: remove dead platform specific code Bartlomiej Zolnierkiewicz
2009-08-16 19:30 ` [PATCH 05/22] Staging: rtxxx0: kill RT8270_USB_DEVICES() macro Bartlomiej Zolnierkiewicz
2009-08-16 19:30 ` [PATCH 06/22] Staging: rtxxx0: PID checking fixes Bartlomiej Zolnierkiewicz
2009-08-16 19:30 ` [PATCH 07/22] Staging: rt3070: kill TimerQThr thread first in RT28xxThreadTerminate() Bartlomiej Zolnierkiewicz
2009-08-16 19:30 ` [PATCH 08/22] Staging: rtxxx0: kill PID macros Bartlomiej Zolnierkiewicz
2009-08-16 19:30 ` [PATCH 09/22] Staging: rtxxx0: remove unused defines Bartlomiej Zolnierkiewicz
2009-08-16 19:30 ` [PATCH 10/22] Staging: rtxxx0: unify different RT30xx{Read,Write}RFRegister() flavors Bartlomiej Zolnierkiewicz
2009-08-16 19:30 ` [PATCH 11/22] Staging: rtxxx0: remove superfluous RT30xx ifdefs Bartlomiej Zolnierkiewicz
2009-08-16 19:31 ` [PATCH 12/22] Staging: rtxxx0: unify RT{USB,MP}FilterCalibration() Bartlomiej Zolnierkiewicz
2009-08-16 19:31 ` [PATCH 13/22] Staging: rtxxx0: unify MlmeCheckPsmChange() Bartlomiej Zolnierkiewicz
2009-08-16 19:31 ` [PATCH 14/22] Staging: rtxxx0: unify AsicEvaluateRxAnt() Bartlomiej Zolnierkiewicz
2009-08-16 19:31 ` [PATCH 15/22] Staging: rtxxx0: remove dead DBG_DIAGNOSE code Bartlomiej Zolnierkiewicz
2009-08-16 19:31 ` [PATCH 16/22] Staging: rtxxx0: remove dead virtual adapter support Bartlomiej Zolnierkiewicz
2009-08-16 19:31 ` [PATCH 17/22] Staging: rtxxx0: debug messages fixes Bartlomiej Zolnierkiewicz
2009-08-16 19:31 ` [PATCH 18/22] Staging: rtxxx0: remove unused link_list.h Bartlomiej Zolnierkiewicz
2009-08-16 19:31 ` [PATCH 19/22] Staging: rtxxx0: remove superfluous function prototypes Bartlomiej Zolnierkiewicz
2009-08-16 19:31 ` [PATCH 20/22] Staging: rtxxx0: remove private debugging ioctls Bartlomiej Zolnierkiewicz
2009-08-16 19:32 ` Bartlomiej Zolnierkiewicz [this message]
2009-08-16 19:32 ` [PATCH 22/22] Staging: rtxxx0: remove unused code Bartlomiej Zolnierkiewicz
2009-08-17  3:47 ` [PATCH 00/22] Staging: rt{286,287,307}0: various fixes/cleanups Mike Galbraith
2009-08-17  3:57   ` Mike Galbraith
2009-08-17  4:20     ` Greg KH
2009-08-19 19:25   ` Bartlomiej Zolnierkiewicz
2009-08-20  5:44     ` Mike Galbraith
2009-08-23 13:18       ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090816193202.3789.46058.sendpatchset@localhost.localdomain \
    --to=bzolnier@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.