[PATCH 22/22] Staging: rtxxx0: remove unused code

[Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>]

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rtxxx0: remove unused code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/staging/rt2860/common/cmm_data.c   |  113 ----
 drivers/staging/rt2860/common/cmm_sanity.c |  184 ------
 drivers/staging/rt2860/common/cmm_wpa.c    |  794 -----------------------------
 drivers/staging/rt2860/common/mlme.c       |    4 
 drivers/staging/rt2860/rtmp.h              |   84 ---
 drivers/staging/rt2860/rtmp_def.h          |    3 
 6 files changed, 1182 deletions(-)

Index: b/drivers/staging/rt2860/common/cmm_data.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -2017,119 +2017,6 @@ VOID	RTMPHandleRxCoherentInterrupt(
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<== RTMPHandleRxCoherentInterrupt \n"));
 }
-
-
-VOID DBGPRINT_TX_RING(
-	IN PRTMP_ADAPTER  pAd,
-	IN UCHAR          QueIdx)
-{
-	UINT32		Ac0Base;
-	UINT32		Ac0HwIdx = 0, Ac0SwIdx = 0, AC0freeIdx;
-	int			i;
-	PULONG	ptemp;
-
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("=====================================================\n "  ));
-	switch (QueIdx)
-	{
-		case QID_AC_BE:
-			RTMP_IO_READ32(pAd, TX_BASE_PTR0, &Ac0Base);
-			RTMP_IO_READ32(pAd, TX_CTX_IDX0, &Ac0SwIdx);
-			RTMP_IO_READ32(pAd, TX_DTX_IDX0, &Ac0HwIdx);
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("All QID_AC_BE DESCRIPTOR  \n "  ));
-			for (i=0;i<TX_RING_SIZE;i++)
-			{
-				ptemp= (PULONG)pAd->TxRing[QID_AC_BE].Cell[i].AllocVa;
-				DBGPRINT_RAW(RT_DEBUG_TRACE, ("[%02d]  %08lx: %08lx: %08lx: %08lx\n " , i, *ptemp,*(ptemp+1),*(ptemp+2),*(ptemp+3)));
-			}
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("  \n "  ));
-			break;
-		case QID_AC_BK:
-			RTMP_IO_READ32(pAd, TX_BASE_PTR1, &Ac0Base);
-			RTMP_IO_READ32(pAd, TX_CTX_IDX1, &Ac0SwIdx);
-			RTMP_IO_READ32(pAd, TX_DTX_IDX1, &Ac0HwIdx);
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("All QID_AC_BK DESCRIPTOR  \n "  ));
-			for (i=0;i<TX_RING_SIZE;i++)
-			{
-				ptemp= (PULONG)pAd->TxRing[QID_AC_BK].Cell[i].AllocVa;
-				DBGPRINT_RAW(RT_DEBUG_TRACE, ("[%02d]  %08lx: %08lx: %08lx: %08lx\n " , i, *ptemp,*(ptemp+1),*(ptemp+2),*(ptemp+3)));
-			}
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("  \n "  ));
-			break;
-		case QID_AC_VI:
-			RTMP_IO_READ32(pAd, TX_BASE_PTR2, &Ac0Base);
-			RTMP_IO_READ32(pAd, TX_CTX_IDX2, &Ac0SwIdx);
-			RTMP_IO_READ32(pAd, TX_DTX_IDX2, &Ac0HwIdx);
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("All QID_AC_VI DESCRIPTOR \n "  ));
-			for (i=0;i<TX_RING_SIZE;i++)
-			{
-				ptemp= (PULONG)pAd->TxRing[QID_AC_VI].Cell[i].AllocVa;
-				DBGPRINT_RAW(RT_DEBUG_TRACE, ("[%02d]  %08lx: %08lx: %08lx: %08lx\n " , i, *ptemp,*(ptemp+1),*(ptemp+2),*(ptemp+3)));
-			}
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("  \n "  ));
-			break;
-		case QID_AC_VO:
-			RTMP_IO_READ32(pAd, TX_BASE_PTR3, &Ac0Base);
-			RTMP_IO_READ32(pAd, TX_CTX_IDX3, &Ac0SwIdx);
-			RTMP_IO_READ32(pAd, TX_DTX_IDX3, &Ac0HwIdx);
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("All QID_AC_VO DESCRIPTOR \n "  ));
-			for (i=0;i<TX_RING_SIZE;i++)
-			{
-				ptemp= (PULONG)pAd->TxRing[QID_AC_VO].Cell[i].AllocVa;
-				DBGPRINT_RAW(RT_DEBUG_TRACE, ("[%02d]  %08lx: %08lx: %08lx: %08lx\n " , i, *ptemp,*(ptemp+1),*(ptemp+2),*(ptemp+3)));
-			}
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("  \n "  ));
-			break;
-		case QID_MGMT:
-			RTMP_IO_READ32(pAd, TX_BASE_PTR5, &Ac0Base);
-			RTMP_IO_READ32(pAd, TX_CTX_IDX5, &Ac0SwIdx);
-			RTMP_IO_READ32(pAd, TX_DTX_IDX5, &Ac0HwIdx);
-			DBGPRINT_RAW(RT_DEBUG_TRACE, (" All QID_MGMT  DESCRIPTOR \n "  ));
-			for (i=0;i<MGMT_RING_SIZE;i++)
-			{
-				ptemp= (PULONG)pAd->MgmtRing.Cell[i].AllocVa;
-				DBGPRINT_RAW(RT_DEBUG_TRACE, ("[%02d]  %08lx: %08lx: %08lx: %08lx\n " , i, *ptemp,*(ptemp+1),*(ptemp+2),*(ptemp+3)));
-			}
-			DBGPRINT_RAW(RT_DEBUG_TRACE, ("  \n "  ));
-			break;
-
-		default:
-			DBGPRINT_ERR(("DBGPRINT_TX_RING(Ring %d) not supported\n", QueIdx));
-			break;
-	}
-	AC0freeIdx = pAd->TxRing[QueIdx].TxSwFreeIdx;
-
-	DBGPRINT(RT_DEBUG_TRACE,("TxRing%d, TX_DTX_IDX=%d, TX_CTX_IDX=%d\n", QueIdx, Ac0HwIdx, Ac0SwIdx));
-	DBGPRINT_RAW(RT_DEBUG_TRACE,(" 	TxSwFreeIdx[%d]", AC0freeIdx));
-	DBGPRINT_RAW(RT_DEBUG_TRACE,("	pending-NDIS=%ld\n", pAd->RalinkCounters.PendingNdisPacketCount));
-
-
-}
-
-
-VOID DBGPRINT_RX_RING(
-	IN PRTMP_ADAPTER  pAd)
-{
-	UINT32		Ac0Base;
-	UINT32		Ac0HwIdx = 0, Ac0SwIdx = 0, AC0freeIdx;
-	int			i;
-	UINT32	*ptemp;
-
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("=====================================================\n "  ));
-	RTMP_IO_READ32(pAd, RX_BASE_PTR, &Ac0Base);
-	RTMP_IO_READ32(pAd, RX_CRX_IDX, &Ac0SwIdx);
-	RTMP_IO_READ32(pAd, RX_DRX_IDX, &Ac0HwIdx);
-	AC0freeIdx = pAd->RxRing.RxSwReadIdx;
-
-	DBGPRINT_RAW(RT_DEBUG_TRACE, ("All RX DSP  \n "  ));
-	for (i=0;i<RX_RING_SIZE;i++)
-	{
-		ptemp = (UINT32 *)pAd->RxRing.Cell[i].AllocVa;
-		DBGPRINT_RAW(RT_DEBUG_TRACE, ("[%02d]  %08x: %08x: %08x: %08x\n " , i, *ptemp,*(ptemp+1),*(ptemp+2),*(ptemp+3)));
-	}
-	DBGPRINT(RT_DEBUG_TRACE,("RxRing, RX_DRX_IDX=%d, RX_CRX_IDX=%d \n", Ac0HwIdx, Ac0SwIdx));
-	DBGPRINT_RAW(RT_DEBUG_TRACE,(" 	RxSwReadIdx [%d]=", AC0freeIdx));
-	DBGPRINT_RAW(RT_DEBUG_TRACE,("	pending-NDIS=%ld\n", pAd->RalinkCounters.PendingNdisPacketCount));
-}
 #endif /* RT2860 */
 
 /*
Index: b/drivers/staging/rt2860/common/cmm_sanity.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_sanity.c
+++ b/drivers/staging/rt2860/common/cmm_sanity.c
@@ -1052,187 +1052,3 @@ NDIS_802_11_NETWORK_TYPE NetworkTypeInUs
 
 	return NetWorkType;
 }
-
-/*
-    ==========================================================================
-    Description:
-        WPA message sanity check
-    Return:
-        TRUE if all parameters are OK, FALSE otherwise
-    ==========================================================================
- */
-BOOLEAN PeerWpaMessageSanity(
-    IN 	PRTMP_ADAPTER 		pAd,
-    IN 	PEAPOL_PACKET 		pMsg,
-    IN 	ULONG 				MsgLen,
-    IN 	UCHAR				MsgType,
-    IN 	MAC_TABLE_ENTRY  	*pEntry)
-{
-	UCHAR			mic[LEN_KEY_DESC_MIC], digest[80], KEYDATA[MAX_LEN_OF_RSNIE];
-	BOOLEAN			bReplayDiff = FALSE;
-	BOOLEAN			bWPA2 = FALSE;
-	KEY_INFO		EapolKeyInfo;
-	UCHAR			GroupKeyIndex = 0;
-
-
-	NdisZeroMemory(mic, sizeof(mic));
-	NdisZeroMemory(digest, sizeof(digest));
-	NdisZeroMemory(KEYDATA, sizeof(KEYDATA));
-	NdisZeroMemory((PUCHAR)&EapolKeyInfo, sizeof(EapolKeyInfo));
-
-	NdisMoveMemory((PUCHAR)&EapolKeyInfo, (PUCHAR)&pMsg->KeyDesc.KeyInfo, sizeof(KEY_INFO));
-
-	*((USHORT *)&EapolKeyInfo) = cpu2le16(*((USHORT *)&EapolKeyInfo));
-
-	// Choose WPA2 or not
-	if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2) || (pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK))
-		bWPA2 = TRUE;
-
-	// 0. Check MsgType
-	if ((MsgType > EAPOL_GROUP_MSG_2) || (MsgType < EAPOL_PAIR_MSG_1))
-	{
-		DBGPRINT(RT_DEBUG_ERROR, ("The message type is invalid(%d)! \n", MsgType));
-		return FALSE;
-	}
-
-	// 1. Replay counter check
- 	if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1)	// For supplicant
-    {
-    	// First validate replay counter, only accept message with larger replay counter.
-		// Let equal pass, some AP start with all zero replay counter
-		UCHAR	ZeroReplay[LEN_KEY_DESC_REPLAY];
-
-        NdisZeroMemory(ZeroReplay, LEN_KEY_DESC_REPLAY);
-		if ((RTMPCompareMemory(pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter, LEN_KEY_DESC_REPLAY) != 1) &&
-			(RTMPCompareMemory(pMsg->KeyDesc.ReplayCounter, ZeroReplay, LEN_KEY_DESC_REPLAY) != 0))
-    	{
-			bReplayDiff = TRUE;
-    	}
- 	}
-	else if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)	// For authenticator
-	{
-		// check Replay Counter coresponds to MSG from authenticator, otherwise discard
-    	if (!NdisEqualMemory(pMsg->KeyDesc.ReplayCounter, pEntry->R_Counter, LEN_KEY_DESC_REPLAY))
-    	{
-			bReplayDiff = TRUE;
-    	}
-	}
-
-	// Replay Counter different condition
-	if (bReplayDiff)
-	{
-		// send wireless event - for replay counter different
-		if (pAd->CommonCfg.bWirelessEvent)
-			RTMPSendWirelessEvent(pAd, IW_REPLAY_COUNTER_DIFF_EVENT_FLAG, pEntry->Addr, pEntry->apidx, 0);
-
-		if (MsgType < EAPOL_GROUP_MSG_1)
-		{
-           	DBGPRINT(RT_DEBUG_ERROR, ("Replay Counter Different in pairwise msg %d of 4-way handshake!\n", MsgType));
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("Replay Counter Different in group msg %d of 2-way handshake!\n", (MsgType - EAPOL_PAIR_MSG_4)));
-		}
-
-		hex_dump("Receive replay counter ", pMsg->KeyDesc.ReplayCounter, LEN_KEY_DESC_REPLAY);
-		hex_dump("Current replay counter ", pEntry->R_Counter, LEN_KEY_DESC_REPLAY);
-        return FALSE;
-	}
-
-	// 2. Verify MIC except Pairwise Msg1
-	if (MsgType != EAPOL_PAIR_MSG_1)
-	{
-		UCHAR			rcvd_mic[LEN_KEY_DESC_MIC];
-
-		// Record the received MIC for check later
-		NdisMoveMemory(rcvd_mic, pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-		NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-
-        if (pEntry->WepStatus == Ndis802_11Encryption2Enabled)	// TKIP
-        {
-            hmac_md5(pEntry->PTK, LEN_EAP_MICK, (PUCHAR)pMsg, MsgLen, mic);
-        }
-        else if (pEntry->WepStatus == Ndis802_11Encryption3Enabled)	// AES
-        {
-            HMAC_SHA1((PUCHAR)pMsg, MsgLen, pEntry->PTK, LEN_EAP_MICK, digest);
-            NdisMoveMemory(mic, digest, LEN_KEY_DESC_MIC);
-        }
-
-        if (!NdisEqualMemory(rcvd_mic, mic, LEN_KEY_DESC_MIC))
-        {
-			// send wireless event - for MIC different
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_MIC_DIFF_EVENT_FLAG, pEntry->Addr, pEntry->apidx, 0);
-
-			if (MsgType < EAPOL_GROUP_MSG_1)
-			{
-            	DBGPRINT(RT_DEBUG_ERROR, ("MIC Different in pairwise msg %d of 4-way handshake!\n", MsgType));
-			}
-			else
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("MIC Different in group msg %d of 2-way handshake!\n", (MsgType - EAPOL_PAIR_MSG_4)));
-			}
-
-			hex_dump("Received MIC", rcvd_mic, LEN_KEY_DESC_MIC);
-			hex_dump("Desired  MIC", mic, LEN_KEY_DESC_MIC);
-
-			return FALSE;
-        }
-	}
-
-	// Extract the context of the Key Data field if it exist
-	// The field in pairwise_msg_2_WPA1(WPA2) & pairwise_msg_3_WPA1 is un-encrypted.
-	// The field in group_msg_1_WPA1(WPA2) & pairwise_msg_3_WPA2 is encrypted.
-	if (pMsg->KeyDesc.KeyDataLen[1] > 0)
-	{
-		// Decrypt this field
-		if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2) || (MsgType == EAPOL_GROUP_MSG_1))
-		{
-			if(pEntry->WepStatus == Ndis802_11Encryption3Enabled)
-			{
-				// AES
-				AES_GTK_KEY_UNWRAP(&pEntry->PTK[16], KEYDATA, pMsg->KeyDesc.KeyDataLen[1],pMsg->KeyDesc.KeyData);
-			}
-			else
-			{
-				INT 	i;
-				UCHAR   Key[32];
-				// Decrypt TKIP GTK
-				// Construct 32 bytes RC4 Key
-				NdisMoveMemory(Key, pMsg->KeyDesc.KeyIv, 16);
-				NdisMoveMemory(&Key[16], &pEntry->PTK[16], 16);
-				ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, Key, 32);
-				//discard first 256 bytes
-				for(i = 0; i < 256; i++)
-					ARCFOUR_BYTE(&pAd->PrivateInfo.WEPCONTEXT);
-				// Decrypt GTK. Becareful, there is no ICV to check the result is correct or not
-				ARCFOUR_DECRYPT(&pAd->PrivateInfo.WEPCONTEXT, KEYDATA, pMsg->KeyDesc.KeyData, pMsg->KeyDesc.KeyDataLen[1]);
-			}
-
-			if (!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))
-				GroupKeyIndex = EapolKeyInfo.KeyIndex;
-
-		}
-		else if ((MsgType == EAPOL_PAIR_MSG_2) || (MsgType == EAPOL_PAIR_MSG_3 && !bWPA2))
-		{
-			NdisMoveMemory(KEYDATA, pMsg->KeyDesc.KeyData, pMsg->KeyDesc.KeyDataLen[1]);
-		}
-		else
-		{
-
-			return TRUE;
-		}
-
-		// Parse Key Data field to
-		// 1. verify RSN IE for pairwise_msg_2_WPA1(WPA2) ,pairwise_msg_3_WPA1(WPA2)
-		// 2. verify KDE format for pairwise_msg_3_WPA2, group_msg_1_WPA2
-		// 3. update shared key for pairwise_msg_3_WPA2, group_msg_1_WPA1(WPA2)
-		if (!RTMPParseEapolKeyData(pAd, KEYDATA, pMsg->KeyDesc.KeyDataLen[1], GroupKeyIndex, MsgType, bWPA2, pEntry))
-		{
-			return FALSE;
-		}
-	}
-
-	return TRUE;
-
-}
Index: b/drivers/staging/rt2860/common/cmm_wpa.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -771,70 +771,6 @@ BOOLEAN RTMPCheckWPAframe(
     return TRUE;
 }
 
-
-/*
-    ==========================================================================
-    Description:
-        ENCRYPT AES GTK before sending in EAPOL frame.
-        AES GTK length = 128 bit,  so fix blocks for aes-key-wrap as 2 in this function.
-        This function references to RFC 3394 for aes key wrap algorithm.
-    Return:
-    ==========================================================================
-*/
-VOID AES_GTK_KEY_WRAP(
-    IN UCHAR    *key,
-    IN UCHAR    *plaintext,
-    IN UCHAR    p_len,
-    OUT UCHAR   *ciphertext)
-{
-    UCHAR       A[8], BIN[16], BOUT[16];
-    UCHAR       R[512];
-    INT         num_blocks = p_len/8;   // unit:64bits
-    INT         i, j;
-    aes_context aesctx;
-    UCHAR       xor;
-
-    rtmp_aes_set_key(&aesctx, key, 128);
-
-    // Init IA
-    for (i = 0; i < 8; i++)
-        A[i] = 0xa6;
-
-    //Input plaintext
-    for (i = 0; i < num_blocks; i++)
-    {
-        for (j = 0 ; j < 8; j++)
-            R[8 * (i + 1) + j] = plaintext[8 * i + j];
-    }
-
-    // Key Mix
-    for (j = 0; j < 6; j++)
-    {
-        for(i = 1; i <= num_blocks; i++)
-        {
-            //phase 1
-            NdisMoveMemory(BIN, A, 8);
-            NdisMoveMemory(&BIN[8], &R[8 * i], 8);
-            rtmp_aes_encrypt(&aesctx, BIN, BOUT);
-
-            NdisMoveMemory(A, &BOUT[0], 8);
-            xor = num_blocks * j + i;
-            A[7] = BOUT[7] ^ xor;
-            NdisMoveMemory(&R[8 * i], &BOUT[8], 8);
-        }
-    }
-
-    // Output ciphertext
-    NdisMoveMemory(ciphertext, A, 8);
-
-    for (i = 1; i <= num_blocks; i++)
-    {
-        for (j = 0 ; j < 8; j++)
-            ciphertext[8 * i + j] = R[8 * i + j];
-    }
-}
-
-
 /*
 	========================================================================
 
@@ -906,733 +842,3 @@ VOID	AES_GTK_KEY_UNWRAP(
 
 	os_free_mem(NULL, R);
 }
-
-/*
-    ==========================================================================
-    Description:
-		Report the EAP message type
-
-	Arguments:
-		msg		-	EAPOL_PAIR_MSG_1
-					EAPOL_PAIR_MSG_2
-					EAPOL_PAIR_MSG_3
-					EAPOL_PAIR_MSG_4
-					EAPOL_GROUP_MSG_1
-					EAPOL_GROUP_MSG_2
-
-    Return:
-         message type string
-
-    ==========================================================================
-*/
-CHAR *GetEapolMsgType(CHAR msg)
-{
-    if(msg == EAPOL_PAIR_MSG_1)
-        return "Pairwise Message 1";
-    else if(msg == EAPOL_PAIR_MSG_2)
-        return "Pairwise Message 2";
-	else if(msg == EAPOL_PAIR_MSG_3)
-        return "Pairwise Message 3";
-	else if(msg == EAPOL_PAIR_MSG_4)
-        return "Pairwise Message 4";
-	else if(msg == EAPOL_GROUP_MSG_1)
-        return "Group Message 1";
-	else if(msg == EAPOL_GROUP_MSG_2)
-        return "Group Message 2";
-    else
-    	return "Invalid Message";
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Check Sanity RSN IE of EAPoL message
-
-    Arguments:
-
-    Return Value:
-
-
-    ========================================================================
-*/
-BOOLEAN RTMPCheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	OUT	UCHAR			*Offset)
-{
-	PUCHAR              pVIE;
-	UCHAR               len;
-	PEID_STRUCT         pEid;
-	BOOLEAN				result = FALSE;
-
-	pVIE = pData;
-	len	 = DataLen;
-	*Offset = 0;
-
-	while (len > sizeof(RSNIE2))
-	{
-		pEid = (PEID_STRUCT) pVIE;
-		// WPA RSN IE
-		if ((pEid->Eid == IE_WPA) && (NdisEqualMemory(pEid->Octet, WPA_OUI, 4)))
-		{
-			if ((pEntry->AuthMode == Ndis802_11AuthModeWPA || pEntry->AuthMode == Ndis802_11AuthModeWPAPSK) &&
-				(NdisEqualMemory(pVIE, pEntry->RSN_IE, pEntry->RSNIE_Len)) &&
-				(pEntry->RSNIE_Len == (pEid->Len + 2)))
-			{
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		// WPA2 RSN IE
-		else if ((pEid->Eid == IE_RSN) && (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3)))
-		{
-			if ((pEntry->AuthMode == Ndis802_11AuthModeWPA2 || pEntry->AuthMode == Ndis802_11AuthModeWPA2PSK) &&
-				(NdisEqualMemory(pVIE, pEntry->RSN_IE, pEntry->RSNIE_Len)) &&
-				(pEntry->RSNIE_Len == (pEid->Len + 2))/* ToDo-AlbertY for mesh*/)
-			{
-					result = TRUE;
-			}
-
-			*Offset += (pEid->Len + 2);
-		}
-		else
-		{
-			break;
-		}
-
-		pVIE += (pEid->Len + 2);
-		len  -= (pEid->Len + 2);
-	}
-
-
-	return result;
-
-}
-
-
-/*
-    ========================================================================
-
-    Routine Description:
-    Parse KEYDATA field.  KEYDATA[] May contain 2 RSN IE and optionally GTK.
-    GTK  is encaptulated in KDE format at  p.83 802.11i D10
-
-    Arguments:
-
-    Return Value:
-
-    Note:
-        802.11i D10
-
-    ========================================================================
-*/
-BOOLEAN RTMPParseEapolKeyData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKeyData,
-	IN  UCHAR           KeyDataLen,
-	IN	UCHAR			GroupKeyIndex,
-	IN	UCHAR			MsgType,
-	IN	BOOLEAN			bWPA2,
-	IN  MAC_TABLE_ENTRY *pEntry)
-{
-    PKDE_ENCAP          pKDE = NULL;
-    PUCHAR              pMyKeyData = pKeyData;
-    UCHAR               KeyDataLength = KeyDataLen;
-    UCHAR               GTKLEN = 0;
-	UCHAR				DefaultIdx = 0;
-	UCHAR				skip_offset;
-
-	// Verify The RSN IE contained in pairewise_msg_2 && pairewise_msg_3 and skip it
-	if (MsgType == EAPOL_PAIR_MSG_2 || MsgType == EAPOL_PAIR_MSG_3)
-    {
-		// Check RSN IE whether it is WPA2/WPA2PSK
-		if (!RTMPCheckRSNIE(pAd, pKeyData, KeyDataLen, pEntry, &skip_offset))
-		{
-			// send wireless event - for RSN IE different
-			if (pAd->CommonCfg.bWirelessEvent)
-				RTMPSendWirelessEvent(pAd, IW_RSNIE_DIFF_EVENT_FLAG, pEntry->Addr, pEntry->apidx, 0);
-
-        	DBGPRINT(RT_DEBUG_ERROR, ("RSN_IE Different in msg %d of 4-way handshake!\n", MsgType));
-			hex_dump("Receive RSN_IE ", pKeyData, KeyDataLen);
-			hex_dump("Desired RSN_IE ", pEntry->RSN_IE, pEntry->RSNIE_Len);
-
-			return FALSE;
-    	}
-    	else
-		{
-			if (bWPA2 && MsgType == EAPOL_PAIR_MSG_3)
-			{
-				// skip RSN IE
-				pMyKeyData += skip_offset;
-				KeyDataLength -= skip_offset;
-				DBGPRINT(RT_DEBUG_TRACE, ("RTMPParseEapolKeyData ==> WPA2/WPA2PSK RSN IE matched in Msg 3, Length(%d) \n", skip_offset));
-			}
-			else
-				return TRUE;
-		}
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE,("RTMPParseEapolKeyData ==> KeyDataLength %d without RSN_IE \n", KeyDataLength));
-
-	// Parse EKD format in pairwise_msg_3_WPA2 && group_msg_1_WPA2
-	if (bWPA2 && (MsgType == EAPOL_PAIR_MSG_3 || MsgType == EAPOL_GROUP_MSG_1))
-	{
-		if (KeyDataLength >= 8)	// KDE format exclude GTK length
-    	{
-        	pKDE = (PKDE_ENCAP) pMyKeyData;
-
-
-			DefaultIdx = pKDE->GTKEncap.Kid;
-
-			// Sanity check - KED length
-			if (KeyDataLength < (pKDE->Len + 2))
-    		{
-        		DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The len from KDE is too short \n"));
-        		return FALSE;
-    		}
-
-			// Get GTK length - refer to IEEE 802.11i-2004 p.82
-			GTKLEN = pKDE->Len -6;
-			if (GTKLEN < LEN_AES_KEY)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN));
-        		return FALSE;
-			}
-
-    	}
-		else
-    	{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR: KDE format length is too short \n"));
-	        return FALSE;
-    	}
-
-		DBGPRINT(RT_DEBUG_TRACE, ("GTK in KDE format ,DefaultKeyID=%d, KeyLen=%d \n", DefaultIdx, GTKLEN));
-		// skip it
-		pMyKeyData += 8;
-		KeyDataLength -= 8;
-
-	}
-	else if (!bWPA2 && MsgType == EAPOL_GROUP_MSG_1)
-	{
-		DefaultIdx = GroupKeyIndex;
-		DBGPRINT(RT_DEBUG_TRACE, ("GTK DefaultKeyID=%d \n", DefaultIdx));
-	}
-
-	// Sanity check - shared key index must be 1 ~ 3
-	if (DefaultIdx < 1 || DefaultIdx > 3)
-    {
-     	DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key index(%d) is invalid in %s %s \n", DefaultIdx, ((bWPA2) ? "WPA2" : "WPA"), GetEapolMsgType(MsgType)));
-        return FALSE;
-    }
-
-	return TRUE;
-
-}
-
-
-/*
-	========================================================================
-
-	Routine Description:
-		Construct EAPoL message for WPA handshaking
-		Its format is below,
-
-		+--------------------+
-		| Protocol Version	 |  1 octet
-		+--------------------+
-		| Protocol Type		 |	1 octet
-		+--------------------+
-		| Body Length		 |  2 octets
-		+--------------------+
-		| Descriptor Type	 |	1 octet
-		+--------------------+
-		| Key Information    |	2 octets
-		+--------------------+
-		| Key Length	     |  1 octet
-		+--------------------+
-		| Key Repaly Counter |	8 octets
-		+--------------------+
-		| Key Nonce		     |  32 octets
-		+--------------------+
-		| Key IV			 |  16 octets
-		+--------------------+
-		| Key RSC			 |  8 octets
-		+--------------------+
-		| Key ID or Reserved |	8 octets
-		+--------------------+
-		| Key MIC			 |	16 octets
-		+--------------------+
-		| Key Data Length	 |	2 octets
-		+--------------------+
-		| Key Data			 |	n octets
-		+--------------------+
-
-
-	Arguments:
-		pAd			Pointer	to our adapter
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ConstructEapolMsg(
-	IN 	PRTMP_ADAPTER    	pAd,
-    IN 	UCHAR				AuthMode,
-    IN 	UCHAR				WepStatus,
-    IN 	UCHAR				GroupKeyWepStatus,
-    IN 	UCHAR				MsgType,
-    IN	UCHAR				DefaultKeyIdx,
-    IN 	UCHAR				*ReplayCounter,
-	IN 	UCHAR				*KeyNonce,
-	IN	UCHAR				*TxRSC,
-	IN	UCHAR				*PTK,
-	IN	UCHAR				*GTK,
-	IN	UCHAR				*RSNIE,
-	IN	UCHAR				RSNIE_Len,
-    OUT PEAPOL_PACKET       pMsg)
-{
-	BOOLEAN	bWPA2 = FALSE;
-
-	// Choose WPA2 or not
-	if ((AuthMode == Ndis802_11AuthModeWPA2) || (AuthMode == Ndis802_11AuthModeWPA2PSK))
-		bWPA2 = TRUE;
-
-    // Init Packet and Fill header
-    pMsg->ProVer = EAPOL_VER;
-    pMsg->ProType = EAPOLKey;
-
-	// Default 95 bytes, the EAPoL-Key descriptor exclude Key-data field
-	pMsg->Body_Len[1] = LEN_EAPOL_KEY_MSG;
-
-	// Fill in EAPoL descriptor
-	if (bWPA2)
-		pMsg->KeyDesc.Type = WPA2_KEY_DESC;
-	else
-		pMsg->KeyDesc.Type = WPA1_KEY_DESC;
-
-	// Fill in Key information, refer to IEEE Std 802.11i-2004 page 78
-	// When either the pairwise or the group cipher is AES, the DESC_TYPE_AES(2) shall be used.
-	pMsg->KeyDesc.KeyInfo.KeyDescVer =
-        	(((WepStatus == Ndis802_11Encryption3Enabled) || (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)) ? (DESC_TYPE_AES) : (DESC_TYPE_TKIP));
-
-	// Specify Key Type as Group(0) or Pairwise(1)
-	if (MsgType >= EAPOL_GROUP_MSG_1)
-		pMsg->KeyDesc.KeyInfo.KeyType = GROUPKEY;
-	else
-		pMsg->KeyDesc.KeyInfo.KeyType = PAIRWISEKEY;
-
-	// Specify Key Index, only group_msg1_WPA1
-	if (!bWPA2 && (MsgType >= EAPOL_GROUP_MSG_1))
-		pMsg->KeyDesc.KeyInfo.KeyIndex = DefaultKeyIdx;
-
-	if (MsgType == EAPOL_PAIR_MSG_3)
-		pMsg->KeyDesc.KeyInfo.Install = 1;
-
-	if ((MsgType == EAPOL_PAIR_MSG_1) || (MsgType == EAPOL_PAIR_MSG_3) || (MsgType == EAPOL_GROUP_MSG_1))
-		pMsg->KeyDesc.KeyInfo.KeyAck = 1;
-
-	if (MsgType != EAPOL_PAIR_MSG_1)
-		pMsg->KeyDesc.KeyInfo.KeyMic = 1;
-
-	if ((bWPA2 && (MsgType >= EAPOL_PAIR_MSG_3)) || (!bWPA2 && (MsgType >= EAPOL_GROUP_MSG_1)))
-    {
-       	pMsg->KeyDesc.KeyInfo.Secure = 1;
-    }
-
-	if (bWPA2 && ((MsgType == EAPOL_PAIR_MSG_3) || (MsgType == EAPOL_GROUP_MSG_1)))
-    {
-        pMsg->KeyDesc.KeyInfo.EKD_DL = 1;
-    }
-
-	// key Information element has done.
-	*(USHORT *)(&pMsg->KeyDesc.KeyInfo) = cpu2le16(*(USHORT *)(&pMsg->KeyDesc.KeyInfo));
-
-	// Fill in Key Length
-	{
-		if (MsgType >= EAPOL_GROUP_MSG_1)
-		{
-			// the length of group key cipher
-			pMsg->KeyDesc.KeyLength[1] = ((GroupKeyWepStatus == Ndis802_11Encryption2Enabled) ? TKIP_GTK_LENGTH : LEN_AES_KEY);
-		}
-		else
-		{
-			// the length of pairwise key cipher
-			pMsg->KeyDesc.KeyLength[1] = ((WepStatus == Ndis802_11Encryption2Enabled) ? LEN_TKIP_KEY : LEN_AES_KEY);
-		}
-	}
-
- 	// Fill in replay counter
-    NdisMoveMemory(pMsg->KeyDesc.ReplayCounter, ReplayCounter, LEN_KEY_DESC_REPLAY);
-
-	// Fill Key Nonce field
-	// ANonce : pairwise_msg1 & pairwise_msg3
-	// SNonce : pairwise_msg2
-	// GNonce : group_msg1_wpa1
-	if ((MsgType <= EAPOL_PAIR_MSG_3) || ((!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))))
-    	NdisMoveMemory(pMsg->KeyDesc.KeyNonce, KeyNonce, LEN_KEY_DESC_NONCE);
-
-	// Fill key IV - WPA2 as 0, WPA1 as random
-	if (!bWPA2 && (MsgType == EAPOL_GROUP_MSG_1))
-	{
-		// Suggest IV be random number plus some number,
-		NdisMoveMemory(pMsg->KeyDesc.KeyIv, &KeyNonce[16], LEN_KEY_DESC_IV);
-        pMsg->KeyDesc.KeyIv[15] += 2;
-	}
-
-    // Fill Key RSC field
-    // It contains the RSC for the GTK being installed.
-	if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2) || (MsgType == EAPOL_GROUP_MSG_1))
-	{
-        NdisMoveMemory(pMsg->KeyDesc.KeyRsc, TxRSC, 6);
-	}
-
-	// Clear Key MIC field for MIC calculation later
-    NdisZeroMemory(pMsg->KeyDesc.KeyMic, LEN_KEY_DESC_MIC);
-
-	ConstructEapolKeyData(pAd,
-						  AuthMode,
-						  WepStatus,
-						  GroupKeyWepStatus,
-						  MsgType,
-						  DefaultKeyIdx,
-						  bWPA2,
-						  PTK,
-						  GTK,
-						  RSNIE,
-						  RSNIE_Len,
-						  pMsg);
-
-	// Calculate MIC and fill in KeyMic Field except Pairwise Msg 1.
-	if (MsgType != EAPOL_PAIR_MSG_1)
-	{
-		CalculateMIC(pAd, WepStatus, PTK, pMsg);
-	}
-
-	DBGPRINT(RT_DEBUG_TRACE, ("===> ConstructEapolMsg for %s %s\n", ((bWPA2) ? "WPA2" : "WPA"), GetEapolMsgType(MsgType)));
-	DBGPRINT(RT_DEBUG_TRACE, ("	     Body length = %d \n", pMsg->Body_Len[1]));
-	DBGPRINT(RT_DEBUG_TRACE, ("	     Key length  = %d \n", pMsg->KeyDesc.KeyLength[1]));
-
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Construct the Key Data field of EAPoL message
-
-	Arguments:
-		pAd			Pointer	to our adapter
-		Elem		Message body
-
-	Return Value:
-		None
-
-	Note:
-
-	========================================================================
-*/
-VOID	ConstructEapolKeyData(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			AuthMode,
-	IN	UCHAR			WepStatus,
-	IN	UCHAR			GroupKeyWepStatus,
-	IN 	UCHAR			MsgType,
-	IN	UCHAR			DefaultKeyIdx,
-	IN	BOOLEAN			bWPA2Capable,
-	IN	UCHAR			*PTK,
-	IN	UCHAR			*GTK,
-	IN	UCHAR			*RSNIE,
-	IN	UCHAR			RSNIE_LEN,
-	OUT PEAPOL_PACKET   pMsg)
-{
-	UCHAR		*mpool, *Key_Data, *Rc4GTK;
-	UCHAR       ekey[(LEN_KEY_DESC_IV+LEN_EAP_EK)];
-	UCHAR		data_offset;
-
-
-	if (MsgType == EAPOL_PAIR_MSG_1 || MsgType == EAPOL_PAIR_MSG_4 || MsgType == EAPOL_GROUP_MSG_2)
-		return;
-
-	// allocate memory pool
-	os_alloc_mem(pAd, (PUCHAR *)&mpool, 1500);
-
-    if (mpool == NULL)
-		return;
-
-	/* Rc4GTK Len = 512 */
-	Rc4GTK = (UCHAR *) ROUND_UP(mpool, 4);
-	/* Key_Data Len = 512 */
-	Key_Data = (UCHAR *) ROUND_UP(Rc4GTK + 512, 4);
-
-	NdisZeroMemory(Key_Data, 512);
-	pMsg->KeyDesc.KeyDataLen[1] = 0;
-	data_offset = 0;
-
-	// Encapsulate RSNIE in pairwise_msg2 & pairwise_msg3
-	if (RSNIE_LEN && ((MsgType == EAPOL_PAIR_MSG_2) || (MsgType == EAPOL_PAIR_MSG_3)))
-	{
-		if (bWPA2Capable)
-			Key_Data[data_offset + 0] = IE_WPA2;
-		else
-			Key_Data[data_offset + 0] = IE_WPA;
-
-        Key_Data[data_offset + 1] = RSNIE_LEN;
-		NdisMoveMemory(&Key_Data[data_offset + 2], RSNIE, RSNIE_LEN);
-		data_offset += (2 + RSNIE_LEN);
-	}
-
-	// Encapsulate KDE format in pairwise_msg3_WPA2 & group_msg1_WPA2
-	if (bWPA2Capable && ((MsgType == EAPOL_PAIR_MSG_3) || (MsgType == EAPOL_GROUP_MSG_1)))
-	{
-		// Key Data Encapsulation (KDE) format - 802.11i-2004  Figure-43w and Table-20h
-        Key_Data[data_offset + 0] = 0xDD;
-
-		if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)
-		{
-			Key_Data[data_offset + 1] = 0x16;// 4+2+16(OUI+DataType+DataField)
-		}
-		else
-		{
-			Key_Data[data_offset + 1] = 0x26;// 4+2+32(OUI+DataType+DataField)
-		}
-
-        Key_Data[data_offset + 2] = 0x00;
-        Key_Data[data_offset + 3] = 0x0F;
-        Key_Data[data_offset + 4] = 0xAC;
-        Key_Data[data_offset + 5] = 0x01;
-
-		// GTK KDE format - 802.11i-2004  Figure-43x
-        Key_Data[data_offset + 6] = (DefaultKeyIdx & 0x03);
-        Key_Data[data_offset + 7] = 0x00;	// Reserved Byte
-
-		data_offset += 8;
-	}
-
-
-	// Encapsulate GTK and encrypt the key-data field with KEK.
-	// Only for pairwise_msg3_WPA2 and group_msg1
-	if ((MsgType == EAPOL_PAIR_MSG_3 && bWPA2Capable) || (MsgType == EAPOL_GROUP_MSG_1))
-	{
-		// Fill in GTK
-		if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)
-		{
-			NdisMoveMemory(&Key_Data[data_offset], GTK, LEN_AES_KEY);
-			data_offset += LEN_AES_KEY;
-		}
-		else
-		{
-			NdisMoveMemory(&Key_Data[data_offset], GTK, TKIP_GTK_LENGTH);
-			data_offset += TKIP_GTK_LENGTH;
-		}
-
-		// Still dont know why, but if not append will occur "GTK not include in MSG3"
-		// Patch for compatibility between zero config and funk
-		if (MsgType == EAPOL_PAIR_MSG_3 && bWPA2Capable)
-		{
-			if (GroupKeyWepStatus == Ndis802_11Encryption3Enabled)
-			{
-				Key_Data[data_offset + 0] = 0xDD;
-				Key_Data[data_offset + 1] = 0;
-				data_offset += 2;
-			}
-			else
-			{
-				Key_Data[data_offset + 0] = 0xDD;
-				Key_Data[data_offset + 1] = 0;
-				Key_Data[data_offset + 2] = 0;
-				Key_Data[data_offset + 3] = 0;
-				Key_Data[data_offset + 4] = 0;
-				Key_Data[data_offset + 5] = 0;
-				data_offset += 6;
-			}
-		}
-
-		// Encrypt the data material in key data field
-		if (WepStatus == Ndis802_11Encryption3Enabled)
-		{
-			AES_GTK_KEY_WRAP(&PTK[16], Key_Data, data_offset, Rc4GTK);
-            // AES wrap function will grow 8 bytes in length
-            data_offset += 8;
-		}
-		else
-		{
-			// PREPARE Encrypted  "Key DATA" field.  (Encrypt GTK with RC4, usinf PTK[16]->[31] as Key, IV-field as IV)
-			// put TxTsc in Key RSC field
-			pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;   //Init crc32.
-
-			// ekey is the contanetion of IV-field, and PTK[16]->PTK[31]
-			NdisMoveMemory(ekey, pMsg->KeyDesc.KeyIv, LEN_KEY_DESC_IV);
-			NdisMoveMemory(&ekey[LEN_KEY_DESC_IV], &PTK[16], LEN_EAP_EK);
-			ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, ekey, sizeof(ekey));  //INIT SBOX, KEYLEN+3(IV)
-			pAd->PrivateInfo.FCSCRC32 = RTMP_CALC_FCS32(pAd->PrivateInfo.FCSCRC32, Key_Data, data_offset);
-			WPAARCFOUR_ENCRYPT(&pAd->PrivateInfo.WEPCONTEXT, Rc4GTK, Key_Data, data_offset);
-		}
-
-		NdisMoveMemory(pMsg->KeyDesc.KeyData, Rc4GTK, data_offset);
-	}
-	else
-	{
-		NdisMoveMemory(pMsg->KeyDesc.KeyData, Key_Data, data_offset);
-	}
-
-	// set key data length field and total length
-	pMsg->KeyDesc.KeyDataLen[1] = data_offset;
-    pMsg->Body_Len[1] += data_offset;
-
-	os_free_mem(pAd, mpool);
-
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Calcaulate MIC. It is used during 4-ways handsharking.
-
-	Arguments:
-		pAd				-	pointer to our pAdapter context
-    	PeerWepStatus	-	indicate the encryption type
-
-	Return Value:
-
-	Note:
-
-	========================================================================
-*/
-VOID	CalculateMIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			PeerWepStatus,
-	IN	UCHAR			*PTK,
-	OUT PEAPOL_PACKET   pMsg)
-{
-    UCHAR   *OutBuffer;
-	ULONG	FrameLen = 0;
-	UCHAR	mic[LEN_KEY_DESC_MIC];
-	UCHAR	digest[80];
-
-	// allocate memory for MIC calculation
-	os_alloc_mem(pAd, (PUCHAR *)&OutBuffer, 512);
-
-    if (OutBuffer == NULL)
-    {
-		DBGPRINT(RT_DEBUG_ERROR, ("!!!CalculateMIC: no memory!!!\n"));
-		return;
-    }
-
-	// make a frame for calculating MIC.
-    MakeOutgoingFrame(OutBuffer,            	&FrameLen,
-                      pMsg->Body_Len[1] + 4,  	pMsg,
-                      END_OF_ARGS);
-
-	NdisZeroMemory(mic, sizeof(mic));
-
-	// Calculate MIC
-    if (PeerWepStatus == Ndis802_11Encryption3Enabled)
- 	{
-		HMAC_SHA1(OutBuffer,  FrameLen, PTK, LEN_EAP_MICK, digest);
-		NdisMoveMemory(mic, digest, LEN_KEY_DESC_MIC);
-	}
-	else
-	{
-		hmac_md5(PTK,  LEN_EAP_MICK, OutBuffer, FrameLen, mic);
-	}
-
-	// store the calculated MIC
-	NdisMoveMemory(pMsg->KeyDesc.KeyMic, mic, LEN_KEY_DESC_MIC);
-
-	os_free_mem(pAd, OutBuffer);
-}
-
-/*
-	========================================================================
-
-	Routine Description:
-		Some received frames can't decrypt by Asic, so decrypt them by software.
-
-	Arguments:
-		pAd				-	pointer to our pAdapter context
-    	PeerWepStatus	-	indicate the encryption type
-
-	Return Value:
-		NDIS_STATUS_SUCCESS		-	decryption successful
-		NDIS_STATUS_FAILURE		-	decryption failure
-
-	========================================================================
-*/
-NDIS_STATUS	RTMPSoftDecryptBroadCastData(
-	IN	PRTMP_ADAPTER					pAd,
-	IN	RX_BLK							*pRxBlk,
-	IN  NDIS_802_11_ENCRYPTION_STATUS 	GroupCipher,
-	IN  PCIPHER_KEY						pShard_key)
-{
-	PRXWI_STRUC			pRxWI = pRxBlk->pRxWI;
-
-
-
-	// handle WEP decryption
-	if (GroupCipher == Ndis802_11Encryption1Enabled)
-    {
-		if (RTMPSoftDecryptWEP(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount, pShard_key))
-		{
-
-			//Minus IV[4] & ICV[4]
-			pRxWI->MPDUtotalByteCount -= 8;
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR : Software decrypt WEP data fails.\n"));
-			// give up this frame
-			return NDIS_STATUS_FAILURE;
-		}
-	}
-	// handle TKIP decryption
-	else if (GroupCipher == Ndis802_11Encryption2Enabled)
-	{
-		if (RTMPSoftDecryptTKIP(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount, 0, pShard_key))
-		{
-
-			//Minus 8 bytes MIC, 8 bytes IV/EIV, 4 bytes ICV
-			pRxWI->MPDUtotalByteCount -= 20;
-		}
-        else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR : RTMPSoftDecryptTKIP Failed\n"));
-			// give up this frame
-			return NDIS_STATUS_FAILURE;
-        }
-	}
-	// handle AES decryption
-	else if (GroupCipher == Ndis802_11Encryption3Enabled)
-	{
-		if (RTMPSoftDecryptAES(pAd, pRxBlk->pData, pRxWI->MPDUtotalByteCount , pShard_key))
-		{
-
-			//8 bytes MIC, 8 bytes IV/EIV (CCMP Header)
-			pRxWI->MPDUtotalByteCount -= 16;
-		}
-		else
-		{
-			DBGPRINT(RT_DEBUG_ERROR, ("ERROR : RTMPSoftDecryptAES Failed\n"));
-			// give up this frame
-			return NDIS_STATUS_FAILURE;
-		}
-	}
-	else
-	{
-		// give up this frame
-		return NDIS_STATUS_FAILURE;
-	}
-
-	return NDIS_STATUS_SUCCESS;
-
-}
-
Index: b/drivers/staging/rt2860/common/mlme.c
===================================================================
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -43,7 +43,6 @@ UCHAR	CISCO_OUI[] = {0x00, 0x40, 0x96};
 
 UCHAR	WPA_OUI[] = {0x00, 0x50, 0xf2, 0x01};
 UCHAR	RSN_OUI[] = {0x00, 0x0f, 0xac};
-UCHAR	WAPI_OUI[] = {0x00, 0x14, 0x72};
 UCHAR   WME_INFO_ELEM[]  = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01};
 UCHAR   WME_PARM_ELEM[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01};
 UCHAR	Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04};
@@ -338,9 +337,6 @@ UCHAR  WpaIe	 = IE_WPA;
 UCHAR  Wpa2Ie	 = IE_WPA2;
 UCHAR  IbssIe	 = IE_IBSS_PARM;
 UCHAR  Ccx2Ie	 = IE_CCX_V2;
-#ifdef RT2870
-UCHAR  WapiIe	 = IE_WAPI;
-#endif
 
 extern UCHAR	WPA_OUI[];
 
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -231,15 +231,9 @@ extern UCHAR  WpaIe;
 extern UCHAR  Wpa2Ie;
 extern UCHAR  IbssIe;
 extern UCHAR  Ccx2Ie;
-#ifdef RT30xx
-extern UCHAR  WapiIe;
-#endif
 
 extern UCHAR  WPA_OUI[];
 extern UCHAR  RSN_OUI[];
-#ifdef RT30xx
-extern UCHAR  WAPI_OUI[];
-#endif
 extern UCHAR  WME_INFO_ELEM[];
 extern UCHAR  WME_PARM_ELEM[];
 extern UCHAR  Ccx2QosInfo[];
@@ -4554,13 +4548,6 @@ BOOLEAN PeerDisassocSanity(
 	OUT PUCHAR pAddr2,
 	OUT USHORT *Reason);
 
-BOOLEAN PeerWpaMessageSanity(
-    IN 	PRTMP_ADAPTER 		pAd,
-    IN 	PEAPOL_PACKET 		pMsg,
-    IN 	ULONG 				MsgLen,
-    IN 	UCHAR				MsgType,
-    IN 	MAC_TABLE_ENTRY  	*pEntry);
-
 BOOLEAN PeerDeauthSanity(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  VOID *Msg,
@@ -5107,13 +5094,6 @@ VOID    AironetAddBeaconReport(
 VOID    AironetCreateBeaconReportFromBssTable(
 	IN  PRTMP_ADAPTER       pAd);
 
-VOID    DBGPRINT_TX_RING(
-	IN PRTMP_ADAPTER  pAd,
-	IN UCHAR          QueIdx);
-
-VOID DBGPRINT_RX_RING(
-	IN PRTMP_ADAPTER  pAd);
-
 CHAR    ConvertToRssi(
 	IN PRTMP_ADAPTER  pAd,
 	IN CHAR				Rssi,
@@ -5135,64 +5115,6 @@ VOID AES_GTK_KEY_UNWRAP(
 	IN	UCHAR	c_len,
 	IN  UCHAR   *ciphertext);
 
-BOOLEAN RTMPCheckRSNIE(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pData,
-	IN  UCHAR           DataLen,
-	IN  MAC_TABLE_ENTRY *pEntry,
-	OUT	UCHAR			*Offset);
-
-BOOLEAN RTMPParseEapolKeyData(
-	IN  PRTMP_ADAPTER   pAd,
-	IN  PUCHAR          pKeyData,
-	IN  UCHAR           KeyDataLen,
-	IN	UCHAR			GroupKeyIndex,
-	IN	UCHAR			MsgType,
-	IN	BOOLEAN			bWPA2,
-	IN  MAC_TABLE_ENTRY *pEntry);
-
-VOID	ConstructEapolMsg(
-	IN 	PRTMP_ADAPTER    	pAd,
-    IN 	UCHAR				PeerAuthMode,
-    IN 	UCHAR				PeerWepStatus,
-    IN 	UCHAR				MyGroupKeyWepStatus,
-    IN 	UCHAR				MsgType,
-    IN	UCHAR				DefaultKeyIdx,
-    IN 	UCHAR				*ReplayCounter,
-	IN 	UCHAR				*KeyNonce,
-	IN	UCHAR				*TxRSC,
-	IN	UCHAR				*PTK,
-	IN	UCHAR				*GTK,
-	IN	UCHAR				*RSNIE,
-	IN	UCHAR				RSNIE_Len,
-    OUT PEAPOL_PACKET       pMsg);
-
-VOID	CalculateMIC(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			PeerWepStatus,
-	IN	UCHAR			*PTK,
-	OUT PEAPOL_PACKET   pMsg);
-
-NDIS_STATUS	RTMPSoftDecryptBroadCastData(
-	IN	PRTMP_ADAPTER					pAd,
-	IN	RX_BLK							*pRxBlk,
-	IN  NDIS_802_11_ENCRYPTION_STATUS 	GroupCipher,
-	IN  PCIPHER_KEY						pShard_key);
-
-VOID	ConstructEapolKeyData(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	UCHAR			PeerAuthMode,
-	IN	UCHAR			PeerWepStatus,
-	IN	UCHAR			GroupKeyWepStatus,
-	IN 	UCHAR			MsgType,
-	IN	UCHAR			DefaultKeyIdx,
-	IN	BOOLEAN			bWPA2Capable,
-	IN	UCHAR			*PTK,
-	IN	UCHAR			*GTK,
-	IN	UCHAR			*RSNIE,
-	IN	UCHAR			RSNIE_LEN,
-	OUT PEAPOL_PACKET   pMsg);
-
 VOID RTMPMakeRSNIE(
 	IN  PRTMP_ADAPTER   pAd,
 	IN  UINT            AuthMode,
@@ -5207,12 +5129,6 @@ VOID HandleCounterMeasure(
 	IN PRTMP_ADAPTER pAd,
 	IN MAC_TABLE_ENTRY  *pEntry);
 
-VOID AES_GTK_KEY_WRAP(
-	IN UCHAR *key,
-	IN UCHAR *plaintext,
-	IN UCHAR p_len,
-	OUT UCHAR *ciphertext);
-
 /* timeout -- ms */
 VOID RTMP_SetPeriodicTimer(
 	IN	NDIS_MINIPORT_TIMER *pTimer,
Index: b/drivers/staging/rt2860/rtmp_def.h
===================================================================
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -569,9 +569,6 @@
 // For 802.11n D3.03
 //#define IE_NEW_EXT_CHA_OFFSET             62    // 802.11n d1. New extension channel offset elemet
 #define IE_SECONDARY_CH_OFFSET		62	// 802.11n D3.03	Secondary Channel Offset element
-#ifdef RT2870
-#define IE_WAPI							68		// WAPI information element
-#endif
 #define IE_2040_BSS_COEXIST               72    // 802.11n D3.0.3
 #define IE_2040_BSS_INTOLERANT_REPORT     73    // 802.11n D3.03
 #define IE_OVERLAPBSS_SCAN_PARM           74    // 802.11n D3.03