All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: Ben Dooks <ben@fluff.org>,
	linux-kernel@vger.kernel.org, sdhci-devel@lists.ossman.eu,
	linuxppc-dev@ozlabs.org,
	Andrew Morton <akpm@linux-foundation.org>,
	Pierre Ossman <pierre@ossman.eu>,
	David Vrabel <david.vrabel@csr.com>
Subject: [PATCH v2] powerpc/85xx: Add eSDHC support for MPC8536DS boards
Date: Wed, 19 Aug 2009 03:38:18 +0400	[thread overview]
Message-ID: <20090818233818.GA29042@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <A17F24A0-87E0-4FFA-9C14-DF57D8A9D015@kernel.crashing.org>

This patch simply adds sdhci node to the device tree.

We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500
MHz) on new board revisions. For non-default setups, it's recommended
to upgrade U-Boot, since it will fixup clock-frequency automatically.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---

On Tue, Aug 11, 2009 at 08:48:32AM -0500, Kumar Gala wrote:
> On Aug 7, 2009, at 2:58 PM, Anton Vorontsov wrote:
> >This patch simply adds sdhci node to the device tree.
> >
> >We specify clock-frequency manually, so that eSDHC will work without
> >upgrading U-Boot. Though, that'll only work for default setup (1500
> >MHz) on new board revisions. For non-default setups, it's recommended
> >to upgrade U-Boot, since it will fixup clock-frequency automatically.
> >
> >Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> >---
> >arch/powerpc/boot/dts/mpc8536ds.dts |    8 ++++++++
> >1 files changed, 8 insertions(+), 0 deletions(-)
> 
> Can you update the mpc8536ds_36b.dts as well (its in my next branch)

Sure thing.

 arch/powerpc/boot/dts/mpc8536ds.dts     |    8 ++++++++
 arch/powerpc/boot/dts/mpc8536ds_36b.dts |    8 ++++++++
 2 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 22caf69..815cebb 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -250,6 +250,14 @@
 			phy_type = "ulpi";
 		};
 
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			clock-frequency = <250000000>;
+		};
+
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index 113ed8b..d95b260 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -250,6 +250,14 @@
 			phy_type = "ulpi";
 		};
 
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			clock-frequency = <250000000>;
+		};
+
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-- 
1.6.3.3

WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Pierre Ossman <pierre@ossman.eu>,
	David Vrabel <david.vrabel@csr.com>, Ben Dooks <ben@fluff.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	linux-kernel@vger.kernel.org, sdhci-devel@lists.ossman.eu,
	linuxppc-dev@ozlabs.org
Subject: [PATCH v2] powerpc/85xx: Add eSDHC support for MPC8536DS boards
Date: Wed, 19 Aug 2009 03:38:18 +0400	[thread overview]
Message-ID: <20090818233818.GA29042@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <A17F24A0-87E0-4FFA-9C14-DF57D8A9D015@kernel.crashing.org>

This patch simply adds sdhci node to the device tree.

We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500
MHz) on new board revisions. For non-default setups, it's recommended
to upgrade U-Boot, since it will fixup clock-frequency automatically.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---

On Tue, Aug 11, 2009 at 08:48:32AM -0500, Kumar Gala wrote:
> On Aug 7, 2009, at 2:58 PM, Anton Vorontsov wrote:
> >This patch simply adds sdhci node to the device tree.
> >
> >We specify clock-frequency manually, so that eSDHC will work without
> >upgrading U-Boot. Though, that'll only work for default setup (1500
> >MHz) on new board revisions. For non-default setups, it's recommended
> >to upgrade U-Boot, since it will fixup clock-frequency automatically.
> >
> >Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> >---
> >arch/powerpc/boot/dts/mpc8536ds.dts |    8 ++++++++
> >1 files changed, 8 insertions(+), 0 deletions(-)
> 
> Can you update the mpc8536ds_36b.dts as well (its in my next branch)

Sure thing.

 arch/powerpc/boot/dts/mpc8536ds.dts     |    8 ++++++++
 arch/powerpc/boot/dts/mpc8536ds_36b.dts |    8 ++++++++
 2 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 22caf69..815cebb 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -250,6 +250,14 @@
 			phy_type = "ulpi";
 		};
 
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			clock-frequency = <250000000>;
+		};
+
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index 113ed8b..d95b260 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -250,6 +250,14 @@
 			phy_type = "ulpi";
 		};
 
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			clock-frequency = <250000000>;
+		};
+
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-- 
1.6.3.3


  reply	other threads:[~2009-08-18 23:38 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-07 19:57 [PATCH v2 0/7] sdhci-of: Some fixes for high-speed and 4-bit SD cards Anton Vorontsov
2009-08-07 19:57 ` Anton Vorontsov
2009-08-07 19:58 ` [PATCH 1/7] sdhci-of: Fix SD clock calculation Anton Vorontsov
2009-08-07 19:58   ` Anton Vorontsov
2009-08-07 19:58 ` [PATCH 2/7] sdhci-of: Avoid writing reserved bits into host control register Anton Vorontsov
2009-08-07 19:58   ` Anton Vorontsov
2009-08-07 19:58 ` [PATCH 3/7] sdhci-of: Fix high-speed cards recognition Anton Vorontsov
2009-08-07 19:58   ` Anton Vorontsov
2009-08-07 19:58 ` [PATCH 4/7] powerpc: Introduce and document sdhci,wp-inverted property for eSDHC Anton Vorontsov
2009-08-07 19:58   ` Anton Vorontsov
2009-08-07 19:58 ` [PATCH 5/7] sdhci-of: Don't hard-code inverted write-protect quirk Anton Vorontsov
2009-08-07 19:58   ` Anton Vorontsov
2009-08-07 19:58 ` [PATCH 6/7] sdhci-of: Cleanup eSDHC's set_clock() a little bit Anton Vorontsov
2009-08-07 19:58   ` Anton Vorontsov
2009-08-07 19:58 ` [PATCH 7/7] powerpc/85xx: Add eSDHC support for MPC8536DS boards Anton Vorontsov
2009-08-07 19:58   ` Anton Vorontsov
2009-08-11 13:48   ` Kumar Gala
2009-08-11 13:48     ` Kumar Gala
2009-08-18 23:38     ` Anton Vorontsov [this message]
2009-08-18 23:38       ` [PATCH v2] " Anton Vorontsov
2009-08-19  1:24       ` Kumar Gala
2009-08-19  1:24         ` Kumar Gala
2009-08-19  1:51         ` Anton Vorontsov
2009-08-19  1:51           ` Anton Vorontsov
2009-08-28 11:02           ` Hu Mingkai-B21284
2009-08-28 11:02             ` Hu Mingkai-B21284
2009-08-28 15:19             ` Anton Vorontsov
2009-08-28 15:19               ` Anton Vorontsov
2009-08-31  7:51               ` Hu Mingkai-B21284
2009-08-31  7:51                 ` Hu Mingkai-B21284
2009-08-25 14:44       ` Kumar Gala
2009-08-25 14:44         ` Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090818233818.GA29042@oksana.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=akpm@linux-foundation.org \
    --cc=ben@fluff.org \
    --cc=david.vrabel@csr.com \
    --cc=galak@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=pierre@ossman.eu \
    --cc=sdhci-devel@lists.ossman.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.