All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 7/7] mpc85xx: Configure QE USB for MPC8569E-MDS boards
Date: Wed, 19 Aug 2009 22:37:24 +0400	[thread overview]
Message-ID: <20090819183724.GG779@oksana.dev.rtsoft.ru> (raw)

Setup QE pin multiplexing for USB function, configure needed BCSRs
and add some fdt fixups.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 board/freescale/mpc8569mds/bcsr.h       |    4 +++
 board/freescale/mpc8569mds/mpc8569mds.c |   32 +++++++++++++++++++++++++++++++
 drivers/qe/fdt.c                        |    2 +
 3 files changed, 38 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h
index 8f53ddd..8adc98e 100644
--- a/board/freescale/mpc8569mds/bcsr.h
+++ b/board/freescale/mpc8569mds/bcsr.h
@@ -71,6 +71,10 @@
 
 #define BCSR16_UPC1_DEV2	0x02
 
+#define BCSR17_nUSBEN		0x80
+#define BCSR17_nUSBLOWSPD	0x40
+#define BCSR17_nUSBVCC		0x20
+#define BCSR17_USBMODE		0x10
 #define BCSR17_FLASH_nWP	0x01
 
 /*BCSR Utils functions*/
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 1197e20..d158723 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -160,6 +160,15 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{0, 25, 1, 0, 1}, /* QEUART_RTS                */
 	{1, 23, 2, 0, 1}, /* QEUART_CTS                */
 
+	/* QE USB                                      */
+	{5,  3, 1, 0, 1}, /* USB_OE                    */
+	{5,  4, 1, 0, 2}, /* USB_TP                    */
+	{5,  5, 1, 0, 2}, /* USB_TN                    */
+	{5,  6, 2, 0, 2}, /* USB_RP                    */
+	{5,  7, 2, 0, 1}, /* USB_RX                    */
+	{5,  8, 2, 0, 1}, /* USB_RN                    */
+	{2,  4, 2, 0, 2}, /* CLK5                      */
+
 	/* SPI Flash, M25P40                           */
 	{4, 27, 3, 0, 1}, /* SPI_MOSI                  */
 	{4, 28, 3, 0, 1}, /* SPI_MISO                  */
@@ -449,6 +458,28 @@ static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
 static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
 #endif
 
+static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd)
+{
+	u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+
+	if (hwconfig_subarg_cmp("qe_usb", "speed", "low"))
+		clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
+	else
+		setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
+
+	if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) {
+		setbits_8(&bcsr[17], BCSR17_nUSBVCC);
+		setbits_8(&bcsr[17], BCSR17_USBMODE);
+		do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode",
+				   "peripheral", sizeof("peripheral"), 1);
+	} else {
+		clrbits_8(&bcsr[17], BCSR17_nUSBVCC);
+		clrbits_8(&bcsr[17], BCSR17_USBMODE);
+	}
+
+	clrbits_8(&bcsr[17], BCSR17_nUSBEN);
+}
+
 #ifdef CONFIG_PCIE1
 static struct pci_controller pcie1_hose;
 #endif  /* CONFIG_PCIE1 */
@@ -598,5 +629,6 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_esdhc(blob, bd);
 	fdt_board_fixup_esdhc(blob, bd);
 	fdt_board_fixup_qe_uart(blob, bd);
+	fdt_board_fixup_qe_usb(blob, bd);
 }
 #endif
diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c
index 5307488..d7c7d13 100644
--- a/drivers/qe/fdt.c
+++ b/drivers/qe/fdt.c
@@ -85,6 +85,8 @@ void ft_qe_setup(void *blob)
 		"bus-frequency", gd->qe_clk, 1);
 	do_fixup_by_compat_u32(blob, "fsl,qe",
 		"brg-frequency", gd->brg_clk, 1);
+	do_fixup_by_compat_u32(blob, "fsl,qe-gtm",
+		"clock-frequency", gd->qe_clk / 2, 1);
 	fdt_fixup_qe_firmware(blob);
 #endif
 }
-- 
1.6.3.3

             reply	other threads:[~2009-08-19 18:37 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-19 18:37 Anton Vorontsov [this message]
  -- strict thread matches above, loose matches on Subject: below --
2009-10-15 13:46 [U-Boot] [PATCH 0/7] Some patches for MPC8569E-MDS Anton Vorontsov
2009-10-15 13:47 ` [U-Boot] [PATCH 7/7] mpc85xx: Configure QE USB for MPC8569E-MDS boards Anton Vorontsov
2009-10-27 15:10   ` Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090819183724.GG779@oksana.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.