All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH][SCSI] hptiop: Add RR44xx adapter support
@ 2009-09-11  9:21 HighPoint Linux Team
  0 siblings, 0 replies; only message in thread
From: HighPoint Linux Team @ 2009-09-11  9:21 UTC (permalink / raw)
  To: Andrew Morton; +Cc: James.Bottomley, linux-scsi, linux-kernel

Most code changes were made to support RR44xx adapters.
- add more PCI device ID.
- using PCI BAR[2] to access RR44xx IOP. 
- using PCI BAR[0] to check and clear RR44xx IRQ.

Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com>

 Documentation/scsi/hptiop.txt |   21 ++++++++++++++++++++-
 drivers/scsi/hptiop.c         |   37 ++++++++++++++++++++++++++-----------
 drivers/scsi/hptiop.h         |    3 ++-
 3 files changed, 48 insertions(+), 13 deletions(-)

diff -urN linux-2.6.31.orig/Documentation/scsi/hptiop.txt linux-2.6.31/Documentation/scsi/hptiop.txt
--- linux-2.6.31.orig/Documentation/scsi/hptiop.txt	2009-09-11 16:11:48.000000000 +0800
+++ linux-2.6.31/Documentation/scsi/hptiop.txt	2009-09-11 16:11:48.000000000 +0800
@@ -3,6 +3,25 @@
 Controller Register Map
 -------------------------
 
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
 For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
 
      BAR0 offset    Register
@@ -93,7 +112,7 @@
 
 
 -----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
 
   This file is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
diff -urN linux-2.6.31.orig/drivers/scsi/hptiop.c linux-2.6.31/drivers/scsi/hptiop.c
--- linux-2.6.31.orig/drivers/scsi/hptiop.c	2009-09-11 16:11:48.000000000 +0800
+++ linux-2.6.31/drivers/scsi/hptiop.c	2009-09-11 16:11:48.000000000 +0800
@@ -1,6 +1,6 @@
 /*
  * HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -41,7 +41,7 @@
 
 static char driver_name[] = "hptiop";
 static const char driver_name_long[] = "RocketRAID 3xxx/4xxx Controller driver";
-static const char driver_ver[] = "v1.3 (071203)";
+static const char driver_ver[] = "v1.6 (090910)";
 
 static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec);
 static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag,
@@ -115,9 +115,13 @@
 static int iop_intr_itl(struct hptiop_hba *hba)
 {
 	struct hpt_iopmu_itl __iomem *iop = hba->u.itl.iop;
+	void __iomem *plx = hba->u.itl.plx;
 	u32 status;
 	int ret = 0;
 
+	if (plx && readl(plx + 0x11C5C) & 0xf)
+		writel(1, plx + 0x11C60);
+
 	status = readl(&iop->outbound_intstatus);
 
 	if (status & IOPMU_OUTBOUND_INT_MSG0) {
@@ -460,15 +464,25 @@
 
 static int hptiop_map_pci_bar_itl(struct hptiop_hba *hba)
 {
+	struct pci_dev *pcidev = hba->pcidev;
 	hba->u.itl.iop = hptiop_map_pci_bar(hba, 0);
-	if (hba->u.itl.iop)
-		return 0;
-	else
+	if (hba->u.itl.iop == NULL)
 		return -1;
+	if ((pcidev->device & 0xff00) == 0x4400) {
+		hba->u.itl.plx = hba->u.itl.iop;
+		hba->u.itl.iop = hptiop_map_pci_bar(hba, 2);
+		if (hba->u.itl.iop == NULL) {
+			iounmap(hba->u.itl.plx);
+			return -1;
+		}
+	}
+	return 0;
 }
 
 static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba)
 {
+	if (hba->u.itl.plx)
+		iounmap(hba->u.itl.plx);
 	iounmap(hba->u.itl.iop);
 }
 
@@ -1239,22 +1253,23 @@
 static struct pci_device_id hptiop_id_table[] = {
 	{ PCI_VDEVICE(TTI, 0x3220), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3320), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3510), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3511), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3521), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
-	{ PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4311), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4400), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops },
 	{ PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops },
diff -urN linux-2.6.31.orig/drivers/scsi/hptiop.h linux-2.6.31/drivers/scsi/hptiop.h
--- linux-2.6.31.orig/drivers/scsi/hptiop.h	2009-09-11 16:11:48.000000000 +0800
+++ linux-2.6.31/drivers/scsi/hptiop.h	2009-09-11 16:11:48.000000000 +0800
@@ -1,6 +1,6 @@
 /*
  * HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -228,6 +228,7 @@
 	union {
 		struct {
 			struct hpt_iopmu_itl __iomem *iop;
+			void __iomem *plx;
 		} itl;
 		struct {
 			struct hpt_iopmv_regs *regs;


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2009-09-11  9:31 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-09-11  9:21 [PATCH][SCSI] hptiop: Add RR44xx adapter support HighPoint Linux Team

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.