* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) @ 2009-09-11 12:56 Boris Derzhavets 2009-09-11 13:38 ` Konrad Rzeszutek Wilk 2009-09-12 23:54 ` Mr. Teo En Ming (Zhang Enming) 0 siblings, 2 replies; 22+ messages in thread From: Boris Derzhavets @ 2009-09-11 12:56 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel@lists.xensource.com [-- Attachment #1.1: Type: text/plain, Size: 2124 bytes --] The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on top of Ubuntu 9.04 Server. Boris. --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server+ Serial Log To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> Date: Friday, September 11, 2009, 7:59 AM On Wed, Sep 09, 2009 at 10:35:34PM -0700, Boris Derzhavets wrote: > Thanks Pasi. > Serial log is attached. OK. What about the boot _without_ Xen? > Boris > > --- On Wed, 9/9/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > Date: Wednesday, September 9, 2009, 4:21 PM > > On Wed, Sep 09, 2009 at 12:43:51PM -0700, Boris Derzhavets wrote: > > Problem with serial console output. > > > > Grub Entry on testing box:- > > > > title Xen 3.5 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /xen-3.5.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1 > > module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 earlyprintk=xen > > module /initrd-2.6.31-rc8.img > > > > On connected box in text mode:- > > > > # cat /dev/ttyS0 | tee log > > > > I am getting unreadable output > > That might be due to baudrate not being set right. Can you use minicom instead (and obviously > set the right baudrate). > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 3654 bytes --] [-- Attachment #2: dmesg.vanilla.2.6.31.gz --] [-- Type: application/x-gzip, Size: 11914 bytes --] [-- Attachment #3: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-11 12:56 Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) Boris Derzhavets @ 2009-09-11 13:38 ` Konrad Rzeszutek Wilk 2009-09-11 15:07 ` Boris Derzhavets 2009-09-12 23:54 ` Mr. Teo En Ming (Zhang Enming) 1 sibling, 1 reply; 22+ messages in thread From: Konrad Rzeszutek Wilk @ 2009-09-11 13:38 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel@lists.xensource.com On Fri, Sep 11, 2009 at 05:56:56AM -0700, Boris Derzhavets wrote: > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > top of Ubuntu 9.04 Server. Boris, Let me specific. Please boot up without Xen, the kernel that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use the serial console. Using the vanilla kernel does not help me. I need to understand what is different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing it to a 2.6.31 is not helping. ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-11 13:38 ` Konrad Rzeszutek Wilk @ 2009-09-11 15:07 ` Boris Derzhavets 2009-09-11 15:55 ` Pasi Kärkkäinen 0 siblings, 1 reply; 22+ messages in thread From: Boris Derzhavets @ 2009-09-11 15:07 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel@lists.xensource.com [-- Attachment #1.1: Type: text/plain, Size: 1497 bytes --] Out of ideas how to setup serial console on Ubuntu 9.04 for vanilla kernel. title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro com1=9600,8n1 console=com1 console=ttyS0 initrd /initrd-2.6.31-rc8.img doesn't work. Googling provides outdated information. (RH 7.2, Suse 10.2) It just crashes grub. Boris. --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> Date: Friday, September 11, 2009, 9:38 AM On Fri, Sep 11, 2009 at 05:56:56AM -0700, Boris Derzhavets wrote: > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > top of Ubuntu 9.04 Server. Boris, Let me specific. Please boot up without Xen, the kernel that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use the serial console. Using the vanilla kernel does not help me. I need to understand what is different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing it to a 2.6.31 is not helping. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 2111 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-11 15:07 ` Boris Derzhavets @ 2009-09-11 15:55 ` Pasi Kärkkäinen 2009-09-11 16:44 ` Boris Derzhavets 2009-09-11 18:03 ` Boris Derzhavets 0 siblings, 2 replies; 22+ messages in thread From: Pasi Kärkkäinen @ 2009-09-11 15:55 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk On Fri, Sep 11, 2009 at 08:07:54AM -0700, Boris Derzhavets wrote: > Out of ideas how to setup serial console on Ubuntu 9.04 for vanilla kernel. > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro com1=9600,8n1 console=com1 console=ttyS0 > initrd /initrd-2.6.31-rc8.img > > doesn't work. > > Googling provides outdated information. (RH 7.2, Suse 10.2) > It just crashes grub. > serial console setup for normal Linux kernel (non-xen): vmlinuz root=whatever ro console=tty0 console=ttyS0,9600n8 That should work if it's a normal onboard serial port. If that doesn't work then try with "console=ttyS0,9600", which enables flow control. Read more here: http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/configure-kernel.html -- Pasi > Boris. > > > > --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > Date: Friday, September 11, 2009, 9:38 AM > > On Fri, Sep 11, 2009 at 05:56:56AM -0700, Boris Derzhavets wrote: > > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > > top of Ubuntu 9.04 Server. > > Boris, > > Let me specific. Please boot up without Xen, the kernel > that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use > the serial console. > > Using the vanilla kernel does not help me. I need to understand what is > different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing > it to a 2.6.31 is not helping. > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-11 15:55 ` Pasi Kärkkäinen @ 2009-09-11 16:44 ` Boris Derzhavets 2009-09-11 18:03 ` Boris Derzhavets 1 sibling, 0 replies; 22+ messages in thread From: Boris Derzhavets @ 2009-09-11 16:44 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 2861 bytes --] Thanks, Pasi. I will give it a try at my earliest convenience. Boris. --- On Fri, 9/11/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Friday, September 11, 2009, 11:55 AM On Fri, Sep 11, 2009 at 08:07:54AM -0700, Boris Derzhavets wrote: > Out of ideas how to setup serial console on Ubuntu 9.04 for vanilla kernel. > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro com1=9600,8n1 console=com1 console=ttyS0 > initrd /initrd-2.6.31-rc8.img > > doesn't work. > > Googling provides outdated information. (RH 7.2, Suse 10.2) > It just crashes grub. > serial console setup for normal Linux kernel (non-xen): vmlinuz root=whatever ro console=tty0 console=ttyS0,9600n8 That should work if it's a normal onboard serial port. If that doesn't work then try with "console=ttyS0,9600", which enables flow control. Read more here: http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/configure-kernel.html -- Pasi > Boris. > > > > --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > Date: Friday, September 11, 2009, 9:38 AM > > On Fri, Sep 11, 2009 at 05:56:56AM -0700, Boris Derzhavets wrote: > > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > > top of Ubuntu 9.04 Server. > > Boris, > > Let me specific. Please boot up without Xen, the kernel > that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use > the serial console. > > Using the vanilla kernel does not help me. I need to understand what is > different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing > it to a 2.6.31 is not helping. > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 4700 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-11 15:55 ` Pasi Kärkkäinen 2009-09-11 16:44 ` Boris Derzhavets @ 2009-09-11 18:03 ` Boris Derzhavets 2009-09-11 18:04 ` Konrad Rzeszutek Wilk 2009-09-12 20:44 ` Pasi Kärkkäinen 1 sibling, 2 replies; 22+ messages in thread From: Boris Derzhavets @ 2009-09-11 18:03 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 3382 bytes --] Pasi, I've tried :- title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600 initrd /initrd-2.6.31-rc8.img and title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600n8 initrd /initrd-2.6.31-rc8.img Both options send output to real console and hangs at the point as under Xen. Boris. P.S Null modem connection is OK . I verified for Xen Serial Grub Entry. --- On Fri, 9/11/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Friday, September 11, 2009, 11:55 AM On Fri, Sep 11, 2009 at 08:07:54AM -0700, Boris Derzhavets wrote: > Out of ideas how to setup serial console on Ubuntu 9.04 for vanilla kernel. > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro com1=9600,8n1 console=com1 console=ttyS0 > initrd /initrd-2.6.31-rc8.img > > doesn't work. > > Googling provides outdated information. (RH 7.2, Suse 10.2) > It just crashes grub. > serial console setup for normal Linux kernel (non-xen): vmlinuz root=whatever ro console=tty0 console=ttyS0,9600n8 That should work if it's a normal onboard serial port. If that doesn't work then try with "console=ttyS0,9600", which enables flow control. Read more here: http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/configure-kernel.html -- Pasi > Boris. > > > > --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > Date: Friday, September 11, 2009, 9:38 AM > > On Fri, Sep 11, 2009 at 05:56:56AM -0700, Boris Derzhavets wrote: > > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > > top of Ubuntu 9.04 Server. > > Boris, > > Let me specific. Please boot up without Xen, the kernel > that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use > the serial console. > > Using the vanilla kernel does not help me. I need to understand what is > different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing > it to a 2.6.31 is not helping. > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 5360 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-11 18:03 ` Boris Derzhavets @ 2009-09-11 18:04 ` Konrad Rzeszutek Wilk 2009-09-11 20:18 ` Boris Derzhavets 2009-09-12 20:44 ` Pasi Kärkkäinen 1 sibling, 1 reply; 22+ messages in thread From: Konrad Rzeszutek Wilk @ 2009-09-11 18:04 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel@lists.xensource.com On Fri, Sep 11, 2009 at 11:03:38AM -0700, Boris Derzhavets wrote: > Pasi, > > I've tried :- > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600 > initrd /initrd-2.6.31-rc8.img > > and > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600n8 > initrd /initrd-2.6.31-rc8.img > > Both options send output to real console and hangs at the point as under > Xen. Can you still ping the machine after that? Does the VGA screen show anything? Can you SSH in it? ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-11 18:04 ` Konrad Rzeszutek Wilk @ 2009-09-11 20:18 ` Boris Derzhavets 0 siblings, 0 replies; 22+ messages in thread From: Boris Derzhavets @ 2009-09-11 20:18 UTC (permalink / raw) To: Konrad Rzeszutek Wilk; +Cc: xen-devel@lists.xensource.com [-- Attachment #1.1: Type: text/plain, Size: 1560 bytes --] >Can you still ping the machine after that? >Can you SSH in it? Booting up stops before DHCP request. Obviously, no >Does the VGA screen show anything? Yes , usual console output. It hangs at the same point as under Xen. View my old messages Boris. --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> Date: Friday, September 11, 2009, 2:04 PM On Fri, Sep 11, 2009 at 11:03:38AM -0700, Boris Derzhavets wrote: > Pasi, > > I've tried :- > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600 > initrd /initrd-2.6.31-rc8.img > > and > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600n8 > initrd /initrd-2.6.31-rc8.img > > Both options send output to real console and hangs at the point as under > Xen. Can you still ping the machine after that? Does the VGA screen show anything? Can you SSH in it? _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 2285 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-11 18:03 ` Boris Derzhavets 2009-09-11 18:04 ` Konrad Rzeszutek Wilk @ 2009-09-12 20:44 ` Pasi Kärkkäinen 2009-09-13 6:24 ` Boris Derzhavets 1 sibling, 1 reply; 22+ messages in thread From: Pasi Kärkkäinen @ 2009-09-12 20:44 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk On Fri, Sep 11, 2009 at 11:03:38AM -0700, Boris Derzhavets wrote: > Pasi, > > I've tried :- > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600 > initrd /initrd-2.6.31-rc8.img > > and > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600n8 > initrd /initrd-2.6.31-rc8.img > > Both options send output to real console and hangs at the point as under > Xen. > Please post "dmesg | grep ttyS" output from baremetal kernel (non-xen). Is the serial port onboard (integrated into the motherboard)? or pci addon card? -- Pasi > Boris. > P.S Null modem connection is OK . I verified for Xen Serial Grub Entry. > > > --- On Fri, 9/11/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Friday, September 11, 2009, 11:55 AM > > On Fri, Sep 11, 2009 at 08:07:54AM -0700, Boris Derzhavets wrote: > > Out of ideas how to setup serial console on Ubuntu 9.04 for vanilla kernel. > > > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro com1=9600,8n1 console=com1 console=ttyS0 > > initrd /initrd-2.6.31-rc8.img > > > > doesn't work. > > > > Googling provides outdated information. (RH 7.2, Suse 10.2) > > It just crashes grub. > > > > serial console setup for normal Linux kernel (non-xen): > > vmlinuz root=whatever ro console=tty0 console=ttyS0,9600n8 > > That should work if it's a normal onboard serial port. > > If that doesn't work then try with "console=ttyS0,9600", > which enables flow control. > > Read more here: > http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/configure-kernel.html > > -- Pasi > > > Boris. > > > > > > > > --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > > Date: Friday, September 11, 2009, 9:38 AM > > > > On Fri, Sep 11, 2009 at 05:56:56AM -0700, Boris Derzhavets wrote: > > > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > > > top of Ubuntu 9.04 Server. > > > > Boris, > > > > Let me specific. Please boot up without Xen, the kernel > > that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use > > the serial console. > > > > Using the vanilla kernel does not help me. I need to understand what is > > different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing > > it to a 2.6.31 is not helping. > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > > > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-12 20:44 ` Pasi Kärkkäinen @ 2009-09-13 6:24 ` Boris Derzhavets 2009-09-13 9:12 ` Pasi Kärkkäinen 0 siblings, 1 reply; 22+ messages in thread From: Boris Derzhavets @ 2009-09-13 6:24 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 4684 bytes --] For 2.6.31 loaded as vanilla :- Linux ServerJaunty 2.6.31 #3 SMP Fri Sep 11 02:19:43 CDT 2009 x86_64 GNU/Linux root@ServerJaunty:~# dmesg | grep ttyS [ 13.811223] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 13.903839] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A It's integrated on board (ASUS P5Q-E) and connected via small cable to output socket. Boris. --- On Sat, 9/12/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Saturday, September 12, 2009, 4:44 PM On Fri, Sep 11, 2009 at 11:03:38AM -0700, Boris Derzhavets wrote: > Pasi, > > I've tried :- > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600 > initrd /initrd-2.6.31-rc8.img > > and > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600n8 > initrd /initrd-2.6.31-rc8.img > > Both options send output to real console and hangs at the point as under > Xen. > Please post "dmesg | grep ttyS" output from baremetal kernel (non-xen). Is the serial port onboard (integrated into the motherboard)? or pci addon card? -- Pasi > Boris. > P.S Null modem connection is OK . I verified for Xen Serial Grub Entry. > > > --- On Fri, 9/11/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Friday, September 11, 2009, 11:55 AM > > On Fri, Sep 11, 2009 at 08:07:54AM -0700, Boris Derzhavets wrote: > > Out of ideas how to setup serial console on Ubuntu 9.04 for vanilla kernel. > > > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro com1=9600,8n1 console=com1 console=ttyS0 > > initrd /initrd-2.6.31-rc8.img > > > > doesn't work. > > > > Googling provides outdated information. (RH 7.2, Suse 10.2) > > It just crashes grub. > > > > serial console setup for normal Linux kernel (non-xen): > > vmlinuz root=whatever ro console=tty0 console=ttyS0,9600n8 > > That should work if it's a normal onboard serial port. > > If that doesn't work then try with "console=ttyS0,9600", > which enables flow control. > > Read more here: > http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/configure-kernel.html > > -- Pasi > > > Boris. > > > > > > > > --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > > Date: Friday, September 11, 2009, 9:38 AM > > > > On Fri, Sep 11, 2009 at 05:56:56AM -0700, Boris Derzhavets wrote: > > > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > > > top of Ubuntu 9.04 Server. > > > > Boris, > > > > Let me specific. Please boot up without Xen, the kernel > > that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use > > the serial console. > > > > Using the vanilla kernel does not help me. I need to understand what is > > different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing > > it to a 2.6.31 is not helping. > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > > > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > [-- Attachment #1.2: Type: text/html, Size: 7662 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 6:24 ` Boris Derzhavets @ 2009-09-13 9:12 ` Pasi Kärkkäinen 2009-09-13 10:33 ` Boris Derzhavets 0 siblings, 1 reply; 22+ messages in thread From: Pasi Kärkkäinen @ 2009-09-13 9:12 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk On Sat, Sep 12, 2009 at 11:24:47PM -0700, Boris Derzhavets wrote: > For 2.6.31 loaded as vanilla :- > > Linux ServerJaunty 2.6.31 #3 SMP Fri Sep 11 02:19:43 CDT 2009 x86_64 GNU/Linux > root@ServerJaunty:~# dmesg | grep ttyS > [ 13.811223] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 13.903839] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > > It's integrated on board (ASUS P5Q-E) and connected via small cable to > output socket. > Well you could always use "dmesg > dmesg.txt" .. No need to setup serial console, unless the kernel crashes.. If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" -- Pasi > Boris. > > --- On Sat, 9/12/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Saturday, September 12, 2009, 4:44 PM > > On Fri, Sep 11, 2009 at 11:03:38AM -0700, Boris Derzhavets wrote: > > Pasi, > > > > I've tried :- > > > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600 > > initrd /initrd-2.6.31-rc8.img > > > > and > > > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600n8 > > initrd /initrd-2.6.31-rc8.img > > > > Both options send output to real console and hangs at the point as under > > Xen. > > > > Please post "dmesg | grep ttyS" output from baremetal kernel (non-xen). > > Is the serial port onboard (integrated into the motherboard)? > or pci addon card? > > -- Pasi > > > Boris. > > P.S Null modem connection is OK . I verified for Xen Serial Grub Entry. > > > > > > --- On Fri, 9/11/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > > > From: Pasi Kärkkäinen <pasik@iki.fi> > > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > > Date: Friday, September 11, 2009, 11:55 AM > > > > On Fri, Sep 11, 2009 at 08:07:54AM -0700, Boris Derzhavets wrote: > > > Out of ideas how to setup serial console on Ubuntu 9.04 for vanilla kernel. > > > > > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro com1=9600,8n1 console=com1 console=ttyS0 > > > initrd /initrd-2.6.31-rc8.img > > > > > > doesn't work. > > > > > > Googling provides outdated information. (RH 7.2, Suse 10.2) > > > It just crashes grub. > > > > > > > serial console setup for normal Linux kernel (non-xen): > > > > vmlinuz root=whatever ro console=tty0 console=ttyS0,9600n8 > > > > That should work if it's a normal onboard serial port. > > > > If that doesn't work then try with "console=ttyS0,9600", > > which enables flow control. > > > > Read more here: > > http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/configure-kernel.html > > > > -- Pasi > > > > > Boris. > > > > > > > > > > > > --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > > > > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > > > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > > > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > > > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > > > Date: Friday, September 11, 2009, 9:38 AM > > > > > > On Fri, Sep 11, 2009 at 05:56:56AM -0700, Boris Derzhavets wrote: > > > > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > > > > top of Ubuntu 9.04 Server. > > > > > > Boris, > > > > > > Let me specific. Please boot up without Xen, the kernel > > > that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use > > > the serial console. > > > > > > Using the vanilla kernel does not help me. I need to understand what is > > > different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing > > > it to a 2.6.31 is not helping. > > > > > > > > > _______________________________________________ > > > Xen-devel mailing list > > > Xen-devel@lists.xensource.com > > > http://lists.xensource.com/xen-devel > > > > > > > > > > > > > > > _______________________________________________ > > > Xen-devel mailing list > > > Xen-devel@lists.xensource.com > > > http://lists.xensource.com/xen-devel > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > > > > > > > > > > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 9:12 ` Pasi Kärkkäinen @ 2009-09-13 10:33 ` Boris Derzhavets 2009-09-13 10:41 ` Pasi Kärkkäinen 0 siblings, 1 reply; 22+ messages in thread From: Boris Derzhavets @ 2009-09-13 10:33 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 6085 bytes --] > No need to setup serial console, unless the kernel crashes.. Vanilla 2.6.31-rc8 crashes. >If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" Dropped, still no luck. Xen Serrial Grub entry works fine. Boris. --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Sunday, September 13, 2009, 5:12 AM On Sat, Sep 12, 2009 at 11:24:47PM -0700, Boris Derzhavets wrote: > For 2.6.31 loaded as vanilla :- > > Linux ServerJaunty 2.6.31 #3 SMP Fri Sep 11 02:19:43 CDT 2009 x86_64 GNU/Linux > root@ServerJaunty:~# dmesg | grep ttyS > [ 13.811223] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 13.903839] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > > It's integrated on board (ASUS P5Q-E) and connected via small cable to > output socket. > Well you could always use "dmesg > dmesg.txt" .. No need to setup serial console, unless the kernel crashes.. If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" -- Pasi > Boris. > > --- On Sat, 9/12/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Saturday, September 12, 2009, 4:44 PM > > On Fri, Sep 11, 2009 at 11:03:38AM -0700, Boris Derzhavets wrote: > > Pasi, > > > > I've tried :- > > > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600 > > initrd /initrd-2.6.31-rc8.img > > > > and > > > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro console=tty0 console=ttyS0,9600n8 > > initrd /initrd-2.6.31-rc8.img > > > > Both options send output to real console and hangs at the point as under > > Xen. > > > > Please post "dmesg | grep ttyS" output from baremetal kernel (non-xen). > > Is the serial port onboard (integrated into the motherboard)? > or pci addon card? > > -- Pasi > > > Boris. > > P.S Null modem connection is OK . I verified for Xen Serial Grub Entry. > > > > > > --- On Fri, 9/11/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > > > From: Pasi Kärkkäinen <pasik@iki.fi> > > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > > Date: Friday, September 11, 2009, 11:55 AM > > > > On Fri, Sep 11, 2009 at 08:07:54AM -0700, Boris Derzhavets wrote: > > > Out of ideas how to setup serial console on Ubuntu 9.04 for vanilla kernel. > > > > > > title vmlinuz-2.6.31-rc8 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > > kernel /vmlinuz-2.6.31-rc8 root=/dev/sdc2 ro com1=9600,8n1 console=com1 console=ttyS0 > > > initrd /initrd-2.6.31-rc8.img > > > > > > doesn't work. > > > > > > Googling provides outdated information. (RH 7.2, Suse 10.2) > > > It just crashes grub. > > > > > > > serial console setup for normal Linux kernel (non-xen): > > > > vmlinuz root=whatever ro console=tty0 console=ttyS0,9600n8 > > > > That should work if it's a normal onboard serial port. > > > > If that doesn't work then try with "console=ttyS0,9600", > > which enables flow control. > > > > Read more here: > > http://tldp.org/HOWTO/Remote-Serial-Console-HOWTO/configure-kernel.html > > > > -- Pasi > > > > > Boris. > > > > > > > > > > > > --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > > > > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > > > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > > > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > > > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > > > Date: Friday, September 11, 2009, 9:38 AM > > > > > > On Fri, Sep 11, 2009 at 05:56:56AM -0700, Boris Derzhavets wrote: > > > > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > > > > top of Ubuntu 9.04 Server. > > > > > > Boris, > > > > > > Let me specific. Please boot up without Xen, the kernel > > > that was built on Wed Sep 9 16:02:46 MSD 2009(2.6.31-rc8), and use > > > the serial console. > > > > > > Using the vanilla kernel does not help me. I need to understand what is > > > different when you boot 2.6.31-rc8 under Xen and without Xen. Comparing > > > it to a 2.6.31 is not helping. > > > > > > > > > _______________________________________________ > > > Xen-devel mailing list > > > Xen-devel@lists.xensource.com > > > http://lists.xensource.com/xen-devel > > > > > > > > > > > > > > > _______________________________________________ > > > Xen-devel mailing list > > > Xen-devel@lists.xensource.com > > > http://lists.xensource.com/xen-devel > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > > > > > > > > > > _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 10328 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 10:33 ` Boris Derzhavets @ 2009-09-13 10:41 ` Pasi Kärkkäinen 2009-09-13 11:23 ` Boris Derzhavets 0 siblings, 1 reply; 22+ messages in thread From: Pasi Kärkkäinen @ 2009-09-13 10:41 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk On Sun, Sep 13, 2009 at 03:33:40AM -0700, Boris Derzhavets wrote: > > No need to setup serial console, unless the kernel crashes.. > Vanilla 2.6.31-rc8 crashes. OK. > >If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" > Dropped, still no luck. > Hmm.. that's weird. Can you paste again the grub entry for Xen with serial console? -- Pasi > Xen Serrial Grub entry works fine. > > Boris. > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 10:41 ` Pasi Kärkkäinen @ 2009-09-13 11:23 ` Boris Derzhavets 2009-09-13 11:31 ` Pasi Kärkkäinen 0 siblings, 1 reply; 22+ messages in thread From: Boris Derzhavets @ 2009-09-13 11:23 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 1324 bytes --] title Xen Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) kernel /xen-3.4.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=9600,8n1 console=com1 module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 earlyprintk=xen module /initrd-2.6.31-rc8.img --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Sunday, September 13, 2009, 6:41 AM On Sun, Sep 13, 2009 at 03:33:40AM -0700, Boris Derzhavets wrote: > > No need to setup serial console, unless the kernel crashes.. > Vanilla 2.6.31-rc8 crashes. OK. > >If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" > Dropped, still no luck. > Hmm.. that's weird. Can you paste again the grub entry for Xen with serial console? -- Pasi > Xen Serrial Grub entry works fine. > > Boris. > _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 1989 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 11:23 ` Boris Derzhavets @ 2009-09-13 11:31 ` Pasi Kärkkäinen 2009-09-13 11:42 ` Boris Derzhavets 2009-09-13 12:35 ` Boris Derzhavets 0 siblings, 2 replies; 22+ messages in thread From: Pasi Kärkkäinen @ 2009-09-13 11:31 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk On Sun, Sep 13, 2009 at 04:23:35AM -0700, Boris Derzhavets wrote: > title Xen Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /xen-3.4.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=9600,8n1 console=com1 > module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 earlyprintk=xen > module /initrd-2.6.31-rc8.img > kernel /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=ttyS0,9600 That should definitely work for baremetal kernel. Does your kernel have serial support built-in? Are you sure your serial port settings on the other computer are ok? Try using "minicom" and playing with the different flow control settings.. (no flow control / hardware flowcontrol / xon,xoff) -- Pasi > > --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Sunday, September 13, 2009, 6:41 AM > > On Sun, Sep 13, 2009 at 03:33:40AM -0700, Boris Derzhavets wrote: > > > No need to setup serial console, unless the kernel crashes.. > > Vanilla 2.6.31-rc8 crashes. > > OK. > > > >If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" > > Dropped, still no luck. > > > > Hmm.. that's weird. > > Can you paste again the grub entry for Xen with serial console? > > -- Pasi > > > Xen Serrial Grub entry works fine. > > > > Boris. > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 11:31 ` Pasi Kärkkäinen @ 2009-09-13 11:42 ` Boris Derzhavets 2009-09-13 11:47 ` Boris Derzhavets 2009-09-13 12:35 ` Boris Derzhavets 1 sibling, 1 reply; 22+ messages in thread From: Boris Derzhavets @ 2009-09-13 11:42 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 2571 bytes --] >That should definitely work for baremetal kernel. Does your kernel have > serial support built-in? This kernel is not mine. It was built like any other via Jeremy's Git Repos. Will check serial console enabled via .config. Thanks Boris --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Sunday, September 13, 2009, 7:31 AM On Sun, Sep 13, 2009 at 04:23:35AM -0700, Boris Derzhavets wrote: > title Xen Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /xen-3.4.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=9600,8n1 console=com1 > module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 earlyprintk=xen > module /initrd-2.6.31-rc8.img > kernel /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=ttyS0,9600 That should definitely work for baremetal kernel. Does your kernel have serial support built-in? Are you sure your serial port settings on the other computer are ok? Try using "minicom" and playing with the different flow control settings.. (no flow control / hardware flowcontrol / xon,xoff) -- Pasi > > --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Sunday, September 13, 2009, 6:41 AM > > On Sun, Sep 13, 2009 at 03:33:40AM -0700, Boris Derzhavets wrote: > > > No need to setup serial console, unless the kernel crashes.. > > Vanilla 2.6.31-rc8 crashes. > > OK. > > > >If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" > > Dropped, still no luck. > > > > Hmm.. that's weird. > > Can you paste again the grub entry for Xen with serial console? > > -- Pasi > > > Xen Serrial Grub entry works fine. > > > > Boris. > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > [-- Attachment #1.2: Type: text/html, Size: 4040 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 11:42 ` Boris Derzhavets @ 2009-09-13 11:47 ` Boris Derzhavets 2009-09-13 15:17 ` Pasi Kärkkäinen 0 siblings, 1 reply; 22+ messages in thread From: Boris Derzhavets @ 2009-09-13 11:47 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 3651 bytes --] Pasi, Does it look good ? # # Serial drivers # CONFIG_SERIAL_8250=m CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=m CONFIG_SERIAL_8250_PNP=m CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=48 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y Boris. --- On Sun, 9/13/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote: From: Boris Derzhavets <bderzhavets@yahoo.com> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Pasi Kärkkäinen" <pasik@iki.fi> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Sunday, September 13, 2009, 7:42 AM >That should definitely work for baremetal kernel. Does your kernel have > serial support built-in? This kernel is not mine. It was built like any other via Jeremy's Git Repos. Will check serial console enabled via .config. Thanks Boris --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Sunday, September 13, 2009, 7:31 AM On Sun, Sep 13, 2009 at 04:23:35AM -0700, Boris Derzhavets wrote: > title Xen Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /xen-3.4.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=9600,8n1 console=com1 > module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 earlyprintk=xen > module /initrd-2.6.31-rc8.img > kernel /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=ttyS0,9600 That should definitely work for baremetal kernel. Does your kernel have serial support built-in? Are you sure your serial port settings on the other computer are ok? Try using "minicom" and playing with the different flow control settings.. (no flow control / hardware flowcontrol / xon,xoff) -- Pasi > > --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Sunday, September 13, 2009, 6:41 AM > > On Sun, Sep 13, 2009 at 03:33:40AM -0700, Boris Derzhavets wrote: > > > No need to setup serial console, unless the kernel crashes.. > > Vanilla 2.6.31-rc8 crashes. > > OK. > > > >If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" > > Dropped, still no luck. > > > > Hmm.. that's weird. > > Can you paste again the grub entry for Xen with serial console? > > -- Pasi > > > Xen Serrial Grub entry works fine. > > > > Boris. > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > -----Inline Attachment Follows----- _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 5422 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 11:47 ` Boris Derzhavets @ 2009-09-13 15:17 ` Pasi Kärkkäinen 2009-09-13 16:14 ` Boris Derzhavets 0 siblings, 1 reply; 22+ messages in thread From: Pasi Kärkkäinen @ 2009-09-13 15:17 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk On Sun, Sep 13, 2009 at 04:47:26AM -0700, Boris Derzhavets wrote: > Pasi, > > Does it look good ? # grep -i serial /boot/config-2.6.31-2.fc12.i686.PAE |grep '=y' CONFIG_LIRC_SERIAL_TRANSMITTER=y CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_KGDB_SERIAL_CONSOLE=y So you're missing at least: CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_USB_SERIAL_GENERIC=y -- Pasi > # > # Serial drivers > # > CONFIG_SERIAL_8250=m > CONFIG_FIX_EARLYCON_MEM=y > CONFIG_SERIAL_8250_PCI=m > CONFIG_SERIAL_8250_PNP=m > CONFIG_SERIAL_8250_CS=m > CONFIG_SERIAL_8250_NR_UARTS=48 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > CONFIG_SERIAL_8250_EXTENDED=y > CONFIG_SERIAL_8250_MANY_PORTS=y > CONFIG_SERIAL_8250_SHARE_IRQ=y > # CONFIG_SERIAL_8250_DETECT_IRQ is not set > CONFIG_SERIAL_8250_RSA=y > > > Boris. > > --- On Sun, 9/13/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote: > > From: Boris Derzhavets <bderzhavets@yahoo.com> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Pasi Kärkkäinen" <pasik@iki.fi> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Sunday, September 13, 2009, 7:42 AM > > >That should definitely work for baremetal kernel. Does your kernel have > > serial support built-in? > > This kernel is not mine. > It was built like any other via Jeremy's Git Repos. > Will check serial console enabled via .config. > > Thanks > Boris > > --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Sunday, September 13, 2009, 7:31 > AM > > On Sun, Sep 13, 2009 at 04:23:35AM -0700, Boris Derzhavets wrote: > > title Xen Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /xen-3.4.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=9600,8n1 console=com1 > > module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 earlyprintk=xen > > module /initrd-2.6.31-rc8.img > > > > kernel /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=ttyS0,9600 > > That should definitely work for baremetal kernel. Does your kernel have > serial support built-in? > > Are you sure your serial port settings on the other computer are ok? > Try using "minicom" and playing with the different flow control > settings.. (no flow control / hardware flowcontrol / xon,xoff) > > -- Pasi > > > > > --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > > > From: Pasi Kärkkäinen <pasik@iki.fi> > > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > > > Date: Sunday, September 13, 2009, 6:41 AM > > > > On Sun, Sep 13, 2009 at 03:33:40AM -0700, Boris Derzhavets wrote: > > > > No need to setup serial console, unless the kernel crashes.. > > > Vanilla 2.6.31-rc8 crashes. > > > > OK. > > > > > >If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" > > > Dropped, still no luck. > > > > > > > Hmm.. that's weird. > > > > Can you paste again the grub entry for Xen with serial console? > > > > -- Pasi > > > > > Xen Serrial Grub entry works fine. > > > > > > Boris. > > > > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > > > > > > > > > > > -----Inline Attachment Follows----- > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 15:17 ` Pasi Kärkkäinen @ 2009-09-13 16:14 ` Boris Derzhavets 0 siblings, 0 replies; 22+ messages in thread From: Boris Derzhavets @ 2009-09-13 16:14 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 5553 bytes --] Attempt to bisect to rc8:- git bisect start git bisect bad fc26d1b48781ec414899947d227f533c3e3010b9 git bisect good 04106d0439e81780a48db38f5c0ee6c15a1d2f04 doesn't allow me restore .config for Xen Dom0 support. I am missing something trying to bisect. Boris. --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Sunday, September 13, 2009, 11:17 AM On Sun, Sep 13, 2009 at 04:47:26AM -0700, Boris Derzhavets wrote: > Pasi, > > Does it look good ? # grep -i serial /boot/config-2.6.31-2.fc12.i686.PAE |grep '=y' CONFIG_LIRC_SERIAL_TRANSMITTER=y CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_KGDB_SERIAL_CONSOLE=y So you're missing at least: CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_USB_SERIAL_GENERIC=y -- Pasi > # > # Serial drivers > # > CONFIG_SERIAL_8250=m > CONFIG_FIX_EARLYCON_MEM=y > CONFIG_SERIAL_8250_PCI=m > CONFIG_SERIAL_8250_PNP=m > CONFIG_SERIAL_8250_CS=m > CONFIG_SERIAL_8250_NR_UARTS=48 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > CONFIG_SERIAL_8250_EXTENDED=y > CONFIG_SERIAL_8250_MANY_PORTS=y > CONFIG_SERIAL_8250_SHARE_IRQ=y > # CONFIG_SERIAL_8250_DETECT_IRQ is not set > CONFIG_SERIAL_8250_RSA=y > > > Boris. > > --- On Sun, 9/13/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote: > > From: Boris Derzhavets <bderzhavets@yahoo.com> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Pasi Kärkkäinen" <pasik@iki.fi> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Sunday, September 13, 2009, 7:42 AM > > >That should definitely work for baremetal kernel. Does your kernel have > > serial support built-in? > > This kernel is not mine. > It was built like any other via Jeremy's Git Repos. > Will check serial console enabled via .config. > > Thanks > Boris > > --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Sunday, September 13, 2009, 7:31 > AM > > On Sun, Sep 13, 2009 at 04:23:35AM -0700, Boris Derzhavets wrote: > > title Xen Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /xen-3.4.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=9600,8n1 console=com1 > > module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 earlyprintk=xen > > module /initrd-2.6.31-rc8.img > > > > kernel /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=ttyS0,9600 > > That should definitely work for baremetal kernel. Does your kernel have > serial support built-in? > > Are you sure your serial port settings on the other computer are ok? > Try using "minicom" and playing with the different flow control > settings.. (no flow control / hardware flowcontrol / xon,xoff) > > -- Pasi > > > > > --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > > > From: Pasi Kärkkäinen <pasik@iki.fi> > > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > > > Date: Sunday, September 13, 2009, 6:41 AM > > > > On Sun, Sep 13, 2009 at 03:33:40AM -0700, Boris Derzhavets wrote: > > > > No need to setup serial console, unless the kernel crashes.. > > > Vanilla 2.6.31-rc8 crashes. > > > > OK. > > > > > >If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" > > > Dropped, still no luck. > > > > > > > Hmm.. that's weird. > > > > Can you paste again the grub entry for Xen with serial console? > > > > -- Pasi > > > > > Xen Serrial Grub entry works fine. > > > > > > Boris. > > > > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > > > > > > > > > > > -----Inline Attachment Follows----- > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 9168 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-13 11:31 ` Pasi Kärkkäinen 2009-09-13 11:42 ` Boris Derzhavets @ 2009-09-13 12:35 ` Boris Derzhavets 1 sibling, 0 replies; 22+ messages in thread From: Boris Derzhavets @ 2009-09-13 12:35 UTC (permalink / raw) To: Pasi Kärkkäinen Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 2551 bytes --] OK, Pasi I tuned minicom , now it's accepting data from Xen Serial Console just nice.. Still nothing from vanilla kernel 2.6.31-rc8. I believe kernel has been built improperly. It doesn't send data to /dev/ttyS0. Boris. --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Sunday, September 13, 2009, 7:31 AM On Sun, Sep 13, 2009 at 04:23:35AM -0700, Boris Derzhavets wrote: > title Xen Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > kernel /xen-3.4.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=9600,8n1 console=com1 > module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 earlyprintk=xen > module /initrd-2.6.31-rc8.img > kernel /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=ttyS0,9600 That should definitely work for baremetal kernel. Does your kernel have serial support built-in? Are you sure your serial port settings on the other computer are ok? Try using "minicom" and playing with the different flow control settings.. (no flow control / hardware flowcontrol / xon,xoff) -- Pasi > > --- On Sun, 9/13/09, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> > Date: Sunday, September 13, 2009, 6:41 AM > > On Sun, Sep 13, 2009 at 03:33:40AM -0700, Boris Derzhavets wrote: > > > No need to setup serial console, unless the kernel crashes.. > > Vanilla 2.6.31-rc8 crashes. > > OK. > > > >If it crashes, try to use only "console=ttyS0,blah", ie. drop "console=tty0" > > Dropped, still no luck. > > > > Hmm.. that's weird. > > Can you paste again the grub entry for Xen with serial console? > > -- Pasi > > > Xen Serrial Grub entry works fine. > > > > Boris. > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > [-- Attachment #1.2: Type: text/html, Size: 4010 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-11 12:56 Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) Boris Derzhavets 2009-09-11 13:38 ` Konrad Rzeszutek Wilk @ 2009-09-12 23:54 ` Mr. Teo En Ming (Zhang Enming) 2009-09-13 6:28 ` Boris Derzhavets 1 sibling, 1 reply; 22+ messages in thread From: Mr. Teo En Ming (Zhang Enming) @ 2009-09-12 23:54 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 3170 bytes --] Hi Are you able to get it working as dom0-patched? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com Email: space.time.universe@gmail.com MSN: teoenming@hotmail.com Mobile Phone: +65-9648-9798 Street: Bedok Reservoir Road Republic of Singapore On Fri, Sep 11, 2009 at 8:56 PM, Boris Derzhavets <bderzhavets@yahoo.com>wrote: > The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on > top of Ubuntu 9.04 Server. > > Boris. > > --- On *Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>*wrote: > > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top > of Ubuntu 9.04 Server+ Serial Log > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > Date: Friday, September 11, 2009, 7:59 AM > > On Wed, Sep 09, 2009 at 10:35:34PM -0700, Boris Derzhavets wrote: > > Thanks Pasi. > > Serial log is attached. > > OK. What about the boot _without_ Xen? > > Boris > > > > --- On Wed, 9/9/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com<http://mc/compose?to=konrad.wilk@oracle.com>> > wrote: > > > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com<http://mc/compose?to=konrad.wilk@oracle.com> > > > > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on > top of Ubuntu 9.04 Server > > To: "Boris Derzhavets" <bderzhavets@yahoo.com<http://mc/compose?to=bderzhavets@yahoo.com> > > > > Cc: "xen-devel@lists.xensource.com<http://mc/compose?to=xen-devel@lists.xensource.com>" > <xen-devel@lists.xensource.com<http://mc/compose?to=xen-devel@lists.xensource.com> > > > > Date: Wednesday, September 9, 2009, 4:21 PM > > > > On Wed, Sep 09, 2009 at 12:43:51PM -0700, Boris Derzhavets wrote: > > > Problem with serial console output. > > > > > > Grub Entry on testing box:- > > > > > > title Xen 3.5 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > > kernel /xen-3.5.gz dom0_mem=1024M loglvl=all guest_loglvl=all > com1=19200,8n1 console=com1 > > > module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 > earlyprintk=xen > > > module /initrd-2.6.31-rc8.img > > > > > > On connected box in text mode:- > > > > > > # cat /dev/ttyS0 | tee log > > > > > > I am getting unreadable output > > > > That might be due to baudrate not being set right. Can you use minicom > instead (and obviously > > set the right baudrate). > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com<http://mc/compose?to=Xen-devel@lists.xensource.com> > > http://lists.xensource.com/xen-devel > > > > > > > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com<http://mc/compose?to=Xen-devel@lists.xensource.com> > http://lists.xensource.com/xen-devel > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > [-- Attachment #1.2: Type: text/html, Size: 5229 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) 2009-09-12 23:54 ` Mr. Teo En Ming (Zhang Enming) @ 2009-09-13 6:28 ` Boris Derzhavets 0 siblings, 0 replies; 22+ messages in thread From: Boris Derzhavets @ 2009-09-13 6:28 UTC (permalink / raw) To: Mr. Teo En Ming (Zhang Enming) Cc: xen-devel@lists.xensource.com, Konrad Rzeszutek Wilk [-- Attachment #1.1: Type: text/plain, Size: 3671 bytes --] If you mean as Xen Dom0 enabled under Xen 3.4.1, then 2.6.31 works fine on F11,F12,Ubuntu 9.04 Server. Boris. --- On Sat, 9/12/09, Mr. Teo En Ming (Zhang Enming) <space.time.universe@gmail.com> wrote: From: Mr. Teo En Ming (Zhang Enming) <space.time.universe@gmail.com> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com> Date: Saturday, September 12, 2009, 7:54 PM Hi Are you able to get it working as dom0-patched? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com Email: space.time.universe@gmail.com MSN: teoenming@hotmail.com Mobile Phone: +65-9648-9798 Street: Bedok Reservoir Road Republic of Singapore On Fri, Sep 11, 2009 at 8:56 PM, Boris Derzhavets <bderzhavets@yahoo.com> wrote: The most recent 2.6.31 built via Jeremy's Git Repos loads as vanilla on top of Ubuntu 9.04 Server. Boris. --- On Fri, 9/11/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server+ Serial Log To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> Date: Friday, September 11, 2009, 7:59 AM On Wed, Sep 09, 2009 at 10:35:34PM -0700, Boris Derzhavets wrote: > Thanks Pasi. > Serial log is attached. OK. What about the boot _without_ Xen? > Boris > > --- On Wed, 9/9/09, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > > From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> > Subject: Re: [Xen-devel] Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > Date: Wednesday, September 9, 2009, 4:21 PM > > On Wed, Sep 09, 2009 at 12:43:51PM -0700, Boris Derzhavets wrote: > > Problem with serial console output. > > > > Grub Entry on testing box:- > > > > title Xen 3.5 Serial / Ubuntu 9.04 Jaunty (kernel 2.6.31-rc8) > > kernel /xen-3.5.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1 > > module /vmlinuz-2.6.31-rc8 ro root=/dev/sdc2 console=hvc0 earlyprintk=xen > > module /initrd-2.6.31-rc8.img > > > > On connected box in text mode:- > > > > # cat /dev/ttyS0 | tee log > > > > I am getting unreadable output > > That might be due to baudrate not being set right. Can you use minicom instead (and obviously > set the right baudrate). > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel > > > > _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel -----Inline Attachment Follows----- _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 7487 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2009-09-13 16:14 UTC | newest] Thread overview: 22+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-09-11 12:56 Attempt to load 2.6.31-rc8 under Xen 3.4.1 on top of Ubuntu 9.04 Server ( JF's 2.6.31 loaded as vanilla) Boris Derzhavets 2009-09-11 13:38 ` Konrad Rzeszutek Wilk 2009-09-11 15:07 ` Boris Derzhavets 2009-09-11 15:55 ` Pasi Kärkkäinen 2009-09-11 16:44 ` Boris Derzhavets 2009-09-11 18:03 ` Boris Derzhavets 2009-09-11 18:04 ` Konrad Rzeszutek Wilk 2009-09-11 20:18 ` Boris Derzhavets 2009-09-12 20:44 ` Pasi Kärkkäinen 2009-09-13 6:24 ` Boris Derzhavets 2009-09-13 9:12 ` Pasi Kärkkäinen 2009-09-13 10:33 ` Boris Derzhavets 2009-09-13 10:41 ` Pasi Kärkkäinen 2009-09-13 11:23 ` Boris Derzhavets 2009-09-13 11:31 ` Pasi Kärkkäinen 2009-09-13 11:42 ` Boris Derzhavets 2009-09-13 11:47 ` Boris Derzhavets 2009-09-13 15:17 ` Pasi Kärkkäinen 2009-09-13 16:14 ` Boris Derzhavets 2009-09-13 12:35 ` Boris Derzhavets 2009-09-12 23:54 ` Mr. Teo En Ming (Zhang Enming) 2009-09-13 6:28 ` Boris Derzhavets
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.