[PATCH] infiniband-diags/src/ibqueryerrors.c: Remove --all option and replace it with --switch, --ca, --router

[PATCH] infiniband-diags/src/ibqueryerrors.c: Remove --all option and replace it with --switch, --ca, --router

[Ira Weiny]

From: Ira Weiny <weiny2-i2BcT+NCU+M@public.gmane.org>
Date: Wed, 23 Sep 2009 11:38:11 -0700
Subject: [PATCH] infiniband-diags/src/ibqueryerrors.c: Remove --all option and replace it with --switch, --ca, --router

	By default ibqueryerrors should print errors for all node types.
	Adding the other options allows for the limitation of this output.

	Also change the --switch option to be --node-guid which is really more
	accurate and use "-G" for better compliance with other utilities.  "-S"
	is left in for backward compatibility for the time being.

	Update the man page

Signed-off-by: Ira Weiny <weiny2-i2BcT+NCU+M@public.gmane.org>
---
 infiniband-diags/man/ibqueryerrors.8 |   62 +++++++++++++++++++-----------
 infiniband-diags/src/ibqueryerrors.c |   70 +++++++++++++++++++++++++---------
 2 files changed, 92 insertions(+), 40 deletions(-)

diff --git a/infiniband-diags/man/ibqueryerrors.8 b/infiniband-diags/man/ibqueryerrors.8
index a327f3b..8f83a7b 100644
--- a/infiniband-diags/man/ibqueryerrors.8
+++ b/infiniband-diags/man/ibqueryerrors.8
@@ -5,7 +5,7 @@ ibqueryerrors.pl \- query and report non-zero IB port counters
 
 .SH SYNOPSIS
 .B ibqueryerrors.pl
-[-a -c -r -R -C <ca_name> -P <ca_port> -s <err1,err2,...> -S <switch_guid>
+[-s <err1,err2,...> -c -r -C <ca_name> -P <ca_port> -s <err1,err2,...> -G <node_guid>
 -D <direct_route> -d]
 
 .SH DESCRIPTION
@@ -20,41 +20,59 @@ reported.
 
 .PP
 .TP
-\fB\-a\fR
-Report an action to take.  Some of the counters are not errors in and of
-themselves.  This reports some more information on what the counters mean and
-what actions can/should be taken if they are non-zero.
+\fB\-s <err1,err2,...>\fR
+Suppress the errors listed in the comma separated list provided.
 .TP
 \fB\-c\fR
 Suppress some of the common "side effect" counters.  These counters usually do
 not indicate an error condition and can be usually be safely ignored.
 .TP
+\fB\-G <node_guid>\fR
+Report results only for the node guid specified.
+.TP
+\fB\-S <node_guid>\fR
+\-S is provided only for backward compatibility and works the same as "-G"
+.TP
+\fB\-D <direct_route>\fR
+Report results only for the switch specified by the direct route path.
+.TP
 \fB\-r\fR
 Report the port information.  This includes LID, port, external port (if
 applicable), link speed setting, remote GUID, remote port, remote external port
 (if applicable), and remote node description information.
 .TP
-\fB\-R\fR
-Recalculate the ibnetdiscover information, ie do not use the cached
-information.  This option is slower but should be used if the diag tools have
-not been used for some time or if there are other reasons to believe that
-the fabric has changed.
+\fB\-\-data\fR
+Include the optional transmit and receive data counters.
 .TP
-\fB\-s <err1,err2,...>\fR
-Suppress the errors listed in the comma separated list provided.
+\fB\-\-switch\fR  print data for switches only
 .TP
-\fB\-S <switch_guid>\fR
-Report results only for the switch specified. (hex format)
+\fB\-\-ca\fR  print data for CA's only
 .TP
-\fB\-D <direct_route>\fR
-Report results only for the switch specified by the direct route path.
+\fB\-\-router\fR  print data for routers only
 .TP
-\fB\-d\fR
-Include the optional transmit and receive data counters.
-.TP
-\fB\-C <ca_name>\fR    use the specified ca_name for the search.
-.TP
-\fB\-P <ca_port>\fR    use the specified ca_port for the search.
+\fB\-R\fR  (This option is obsolete and does nothing)
+
+.SH COMMON OPTIONS
+.PP
+\-d      raise the IB debugging level.
+        May be used several times (-ddd or -d -d -d).
+.PP
+\-e      show send and receive errors (timeouts and others)
+.PP
+\-h      show the usage message
+.PP
+\-v      increase the application verbosity level.
+        May be used several times (-vv or -v -v -v)
+.PP
+\-V      show the version info.
+
+# Other common flags:
+.PP
+\-C <ca_name>    use the specified ca_name.
+.PP
+\-P <ca_port>    use the specified ca_port.
+.PP
+\-t <timeout_ms> override the default timeout for the solicited mads.
 
 
 .SH AUTHOR
diff --git a/infiniband-diags/src/ibqueryerrors.c b/infiniband-diags/src/ibqueryerrors.c
index f73ca6f..ecfd662 100644
--- a/infiniband-diags/src/ibqueryerrors.c
+++ b/infiniband-diags/src/ibqueryerrors.c
@@ -59,12 +59,17 @@ static char *node_name_map_file = NULL;
 static nn_map_t *node_name_map = NULL;
 int data_counters = 0;
 int port_config = 0;
-uint64_t switch_guid = 0;
-char *switch_guid_str = NULL;
+uint64_t node_guid = 0;
+char *node_guid_str = NULL;
 int sup_total = 0;
 enum MAD_FIELDS *suppressed_fields = NULL;
 char *dr_path = NULL;
-int all_nodes = 0;
+
+#define PRINT_ALL 0xFF /* all nodes default flag */
+uint8_t node_type_to_print = PRINT_ALL;
+#define PRINT_SWITCH 0x1
+#define PRINT_CA     0x2
+#define PRINT_ROUTER 0x4
 
 static unsigned int get_max(unsigned int num)
 {
@@ -304,8 +309,21 @@ void print_node(ibnd_node_t * node, void *user_data)
 	int header_printed = 0;
 	int p = 0;
 	int startport = 1;
+	int type = 0;
+
+	switch (node->type) {
+	case IB_NODE_SWITCH:
+		type = PRINT_SWITCH;
+		break;
+	case IB_NODE_CA:
+		type = PRINT_CA;
+		break;
+	case IB_NODE_ROUTER:
+		type = PRINT_ROUTER;
+		break;
+	}
 
-	if (!all_nodes && node->type != IB_NODE_SWITCH)
+	if ((type & node_type_to_print) == 0)
 		return;
 
 	if (node->type == IB_NODE_SWITCH && node->smaenhsp0)
@@ -361,11 +379,24 @@ static int process_opt(void *context, int ch, char *optarg)
 		data_counters++;
 		break;
 	case 3:
-		all_nodes++;
+		if (node_type_to_print == PRINT_ALL)
+			node_type_to_print = 0;
+		node_type_to_print |= PRINT_SWITCH;
+		break;
+	case 4:
+		if (node_type_to_print == PRINT_ALL)
+			node_type_to_print = 0;
+		node_type_to_print |= PRINT_CA;
+		break;
+	case 5:
+		if (node_type_to_print == PRINT_ALL)
+			node_type_to_print = 0;
+		node_type_to_print |= PRINT_ROUTER;
 		break;
+	case 'G':
 	case 'S':
-		switch_guid_str = optarg;
-		switch_guid = strtoull(optarg, 0, 0);
+		node_guid_str = optarg;
+		node_guid = strtoull(optarg, 0, 0);
 		break;
 	case 'D':
 		dr_path = strdup(optarg);
@@ -399,8 +430,9 @@ int main(int argc, char **argv)
 		{"suppress-common", 'c', 0, NULL,
 		 "suppress some of the common counters"},
 		{"node-name-map", 1, 1, "<file>", "node name map file"},
-		{"switch", 'S', 1, "<switch_guid>",
-		 "query only <switch_guid> (hex format)"},
+		{"node-guid", 'G', 1, "<node_guid>", "query only <node_guid>"},
+		{"", 'S', 1, "<node_guid>",
+		 "Same as \"-G\" for backward compatibility"},
 		{"Direct", 'D', 1, "<dr_path>",
 		 "query only switch specified by <dr_path>"},
 		{"report-port", 'r', 0, NULL,
@@ -408,7 +440,9 @@ int main(int argc, char **argv)
 		{"GNDN", 'R', 0, NULL,
 		 "(This option is obsolete and does nothing)"},
 		{"data", 2, 0, NULL, "include the data counters in the output"},
-		{"all", 3, 0, NULL, "output all nodes (not just switches)"},
+		{"switch", 3, 0, NULL, "print data for switches only"},
+		{"ca", 4, 0, NULL, "print data for CA's only"},
+		{"router", 5, 0, NULL, "print data for routers only"},
 		{0}
 	};
 	char usage_args[] = "";
@@ -438,13 +472,13 @@ int main(int argc, char **argv)
 					       NULL, ibmad_port)) < 0)
 			IBWARN("Failed to resolve %s; attempting full scan\n",
 			       dr_path);
-	} else if (switch_guid_str) {
+	} else if (node_guid_str) {
 		if ((resolved =
-		     ib_resolve_portid_str_via(&portid, switch_guid_str,
+		     ib_resolve_portid_str_via(&portid, node_guid_str,
 					       IB_DEST_GUID, ibd_sm_id,
 					       ibmad_port)) >= 0)
 			IBWARN("Failed to resolve %s; attempting full scan\n",
-			       switch_guid_str);
+			       node_guid_str);
 	}
 
 	if (resolved >= 0)
@@ -463,13 +497,13 @@ int main(int argc, char **argv)
 
 	report_suppressed();
 
-	if (switch_guid_str) {
-		ibnd_node_t *node = ibnd_find_node_guid(fabric, switch_guid);
+	if (node_guid_str) {
+		ibnd_node_t *node = ibnd_find_node_guid(fabric, node_guid);
 		if (node)
 			print_node(node, NULL);
 		else
 			fprintf(stderr, "Failed to find node: %s\n",
-				switch_guid_str);
+				node_guid_str);
 	} else if (dr_path) {
 		ibnd_node_t *node = ibnd_find_node_dr(fabric, dr_path);
 		uint8_t ni[IB_SMP_DATA_SIZE];
@@ -477,9 +511,9 @@ int main(int argc, char **argv)
 		if (!smp_query_via(ni, &portid, IB_ATTR_NODE_INFO, 0,
 				   ibd_timeout, ibmad_port))
 			return -1;
-		mad_decode_field(ni, IB_NODE_GUID_F, &(switch_guid));
+		mad_decode_field(ni, IB_NODE_GUID_F, &(node_guid));
 
-		node = ibnd_find_node_guid(fabric, switch_guid);
+		node = ibnd_find_node_guid(fabric, node_guid);
 		if (node)
 			print_node(node, NULL);
 		else
-- 
1.5.4.5

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] infiniband-diags/src/ibqueryerrors.c: Remove --all option and replace it with --switch, --ca, --router

[Sasha Khapyorsky]

Hi Ira,

On 15:09 Wed 23 Sep     , Ira Weiny wrote:
> 
> From: Ira Weiny <weiny2-i2BcT+NCU+M@public.gmane.org>
> Date: Wed, 23 Sep 2009 11:38:11 -0700
> Subject: [PATCH] infiniband-diags/src/ibqueryerrors.c: Remove --all option and replace it with --switch, --ca, --router
> 
> 	By default ibqueryerrors should print errors for all node types.
> 	Adding the other options allows for the limitation of this output.
> 
> 	Also change the --switch option to be --node-guid which is really more
> 	accurate and use "-G" for better compliance with other utilities.  "-S"
> 	is left in for backward compatibility for the time being.
> 
> 	Update the man page
> 
> Signed-off-by: Ira Weiny <weiny2-i2BcT+NCU+M@public.gmane.org>

Applied with comments below. Thanks.

> ---
>  infiniband-diags/man/ibqueryerrors.8 |   62 +++++++++++++++++++-----------
>  infiniband-diags/src/ibqueryerrors.c |   70 +++++++++++++++++++++++++---------
>  2 files changed, 92 insertions(+), 40 deletions(-)
> 
> diff --git a/infiniband-diags/man/ibqueryerrors.8 b/infiniband-diags/man/ibqueryerrors.8
> index a327f3b..8f83a7b 100644
> --- a/infiniband-diags/man/ibqueryerrors.8
> +++ b/infiniband-diags/man/ibqueryerrors.8
> @@ -5,7 +5,7 @@ ibqueryerrors.pl \- query and report non-zero IB port counters
>  
>  .SH SYNOPSIS
>  .B ibqueryerrors.pl
> -[-a -c -r -R -C <ca_name> -P <ca_port> -s <err1,err2,...> -S <switch_guid>
> +[-s <err1,err2,...> -c -r -C <ca_name> -P <ca_port> -s <err1,err2,...> -G <node_guid>

'-s' is listed twice. I'm fixing this.

>  -D <direct_route> -d]
>  
>  .SH DESCRIPTION
> @@ -20,41 +20,59 @@ reported.
>  
>  .PP
>  .TP
> -\fB\-a\fR
> -Report an action to take.  Some of the counters are not errors in and of
> -themselves.  This reports some more information on what the counters mean and
> -what actions can/should be taken if they are non-zero.
> +\fB\-s <err1,err2,...>\fR
> +Suppress the errors listed in the comma separated list provided.
>  .TP
>  \fB\-c\fR
>  Suppress some of the common "side effect" counters.  These counters usually do
>  not indicate an error condition and can be usually be safely ignored.
>  .TP
> +\fB\-G <node_guid>\fR
> +Report results only for the node guid specified.
> +.TP
> +\fB\-S <node_guid>\fR
> +\-S is provided only for backward compatibility and works the same as "-G"
> +.TP
> +\fB\-D <direct_route>\fR
> +Report results only for the switch specified by the direct route path.
> +.TP
>  \fB\-r\fR
>  Report the port information.  This includes LID, port, external port (if
>  applicable), link speed setting, remote GUID, remote port, remote external port
>  (if applicable), and remote node description information.
>  .TP
> -\fB\-R\fR
> -Recalculate the ibnetdiscover information, ie do not use the cached
> -information.  This option is slower but should be used if the diag tools have
> -not been used for some time or if there are other reasons to believe that
> -the fabric has changed.
> +\fB\-\-data\fR
> +Include the optional transmit and receive data counters.
>  .TP
> -\fB\-s <err1,err2,...>\fR
> -Suppress the errors listed in the comma separated list provided.
> +\fB\-\-switch\fR  print data for switches only
>  .TP
> -\fB\-S <switch_guid>\fR
> -Report results only for the switch specified. (hex format)
> +\fB\-\-ca\fR  print data for CA's only
>  .TP
> -\fB\-D <direct_route>\fR
> -Report results only for the switch specified by the direct route path.
> +\fB\-\-router\fR  print data for routers only
>  .TP
> -\fB\-d\fR
> -Include the optional transmit and receive data counters.
> -.TP
> -\fB\-C <ca_name>\fR    use the specified ca_name for the search.
> -.TP
> -\fB\-P <ca_port>\fR    use the specified ca_port for the search.
> +\fB\-R\fR  (This option is obsolete and does nothing)
> +
> +.SH COMMON OPTIONS
> +.PP
> +\-d      raise the IB debugging level.
> +        May be used several times (-ddd or -d -d -d).
> +.PP
> +\-e      show send and receive errors (timeouts and others)
> +.PP
> +\-h      show the usage message
> +.PP
> +\-v      increase the application verbosity level.
> +        May be used several times (-vv or -v -v -v)
> +.PP
> +\-V      show the version info.
> +
> +# Other common flags:
> +.PP
> +\-C <ca_name>    use the specified ca_name.
> +.PP
> +\-P <ca_port>    use the specified ca_port.
> +.PP
> +\-t <timeout_ms> override the default timeout for the solicited mads.
>  
>  
>  .SH AUTHOR
> diff --git a/infiniband-diags/src/ibqueryerrors.c b/infiniband-diags/src/ibqueryerrors.c
> index f73ca6f..ecfd662 100644
> --- a/infiniband-diags/src/ibqueryerrors.c
> +++ b/infiniband-diags/src/ibqueryerrors.c
> @@ -59,12 +59,17 @@ static char *node_name_map_file = NULL;
>  static nn_map_t *node_name_map = NULL;
>  int data_counters = 0;
>  int port_config = 0;
> -uint64_t switch_guid = 0;
> -char *switch_guid_str = NULL;
> +uint64_t node_guid = 0;
> +char *node_guid_str = NULL;
>  int sup_total = 0;
>  enum MAD_FIELDS *suppressed_fields = NULL;
>  char *dr_path = NULL;
> -int all_nodes = 0;
> +
> +#define PRINT_ALL 0xFF /* all nodes default flag */
> +uint8_t node_type_to_print = PRINT_ALL;
> +#define PRINT_SWITCH 0x1
> +#define PRINT_CA     0x2
> +#define PRINT_ROUTER 0x4
>  
>  static unsigned int get_max(unsigned int num)
>  {
> @@ -304,8 +309,21 @@ void print_node(ibnd_node_t * node, void *user_data)
>  	int header_printed = 0;
>  	int p = 0;
>  	int startport = 1;
> +	int type = 0;
> +
> +	switch (node->type) {
> +	case IB_NODE_SWITCH:
> +		type = PRINT_SWITCH;
> +		break;
> +	case IB_NODE_CA:
> +		type = PRINT_CA;
> +		break;
> +	case IB_NODE_ROUTER:
> +		type = PRINT_ROUTER;
> +		break;
> +	}
>  
> -	if (!all_nodes && node->type != IB_NODE_SWITCH)
> +	if ((type & node_type_to_print) == 0)
>  		return;
>  
>  	if (node->type == IB_NODE_SWITCH && node->smaenhsp0)
> @@ -361,11 +379,24 @@ static int process_opt(void *context, int ch, char *optarg)
>  		data_counters++;
>  		break;
>  	case 3:
> -		all_nodes++;
> +		if (node_type_to_print == PRINT_ALL)
> +			node_type_to_print = 0;
> +		node_type_to_print |= PRINT_SWITCH;
> +		break;
> +	case 4:
> +		if (node_type_to_print == PRINT_ALL)
> +			node_type_to_print = 0;
> +		node_type_to_print |= PRINT_CA;
> +		break;
> +	case 5:
> +		if (node_type_to_print == PRINT_ALL)
> +			node_type_to_print = 0;
> +		node_type_to_print |= PRINT_ROUTER;

Instead of repeating 'node_type_to_print' check its setup could be done
as:

	node_type_to_print = 0;
	process_options()...
	if (!node_type_to_print)
		node_type_to_print = ALL;

Adding this as separate patch.

>  		break;
> +	case 'G':
>  	case 'S':
> -		switch_guid_str = optarg;
> -		switch_guid = strtoull(optarg, 0, 0);
> +		node_guid_str = optarg;
> +		node_guid = strtoull(optarg, 0, 0);
>  		break;
>  	case 'D':
>  		dr_path = strdup(optarg);

Some generic thoughts.

When -D, -S, -G and port cannot be resolved should this be an error
instead of full fabric discovery and errors querying?

When such port was resolved shouldn't we skip even partial discover as
useless?

What about unifying -G, -D, -L options (target address type) usage with
other intiniband-diags tools (implemented already with ibdiag_common)?

Sasha

> @@ -399,8 +430,9 @@ int main(int argc, char **argv)
>  		{"suppress-common", 'c', 0, NULL,
>  		 "suppress some of the common counters"},
>  		{"node-name-map", 1, 1, "<file>", "node name map file"},
> -		{"switch", 'S', 1, "<switch_guid>",
> -		 "query only <switch_guid> (hex format)"},
> +		{"node-guid", 'G', 1, "<node_guid>", "query only <node_guid>"},
> +		{"", 'S', 1, "<node_guid>",
> +		 "Same as \"-G\" for backward compatibility"},
>  		{"Direct", 'D', 1, "<dr_path>",
>  		 "query only switch specified by <dr_path>"},
>  		{"report-port", 'r', 0, NULL,
> @@ -408,7 +440,9 @@ int main(int argc, char **argv)
>  		{"GNDN", 'R', 0, NULL,
>  		 "(This option is obsolete and does nothing)"},
>  		{"data", 2, 0, NULL, "include the data counters in the output"},
> -		{"all", 3, 0, NULL, "output all nodes (not just switches)"},
> +		{"switch", 3, 0, NULL, "print data for switches only"},
> +		{"ca", 4, 0, NULL, "print data for CA's only"},
> +		{"router", 5, 0, NULL, "print data for routers only"},
>  		{0}
>  	};
>  	char usage_args[] = "";
> @@ -438,13 +472,13 @@ int main(int argc, char **argv)
>  					       NULL, ibmad_port)) < 0)
>  			IBWARN("Failed to resolve %s; attempting full scan\n",
>  			       dr_path);
> -	} else if (switch_guid_str) {
> +	} else if (node_guid_str) {
>  		if ((resolved =
> -		     ib_resolve_portid_str_via(&portid, switch_guid_str,
> +		     ib_resolve_portid_str_via(&portid, node_guid_str,
>  					       IB_DEST_GUID, ibd_sm_id,
>  					       ibmad_port)) >= 0)
>  			IBWARN("Failed to resolve %s; attempting full scan\n",
> -			       switch_guid_str);
> +			       node_guid_str);
>  	}
>  
>  	if (resolved >= 0)
> @@ -463,13 +497,13 @@ int main(int argc, char **argv)
>  
>  	report_suppressed();
>  
> -	if (switch_guid_str) {
> -		ibnd_node_t *node = ibnd_find_node_guid(fabric, switch_guid);
> +	if (node_guid_str) {
> +		ibnd_node_t *node = ibnd_find_node_guid(fabric, node_guid);
>  		if (node)
>  			print_node(node, NULL);
>  		else
>  			fprintf(stderr, "Failed to find node: %s\n",
> -				switch_guid_str);
> +				node_guid_str);
>  	} else if (dr_path) {
>  		ibnd_node_t *node = ibnd_find_node_dr(fabric, dr_path);
>  		uint8_t ni[IB_SMP_DATA_SIZE];
> @@ -477,9 +511,9 @@ int main(int argc, char **argv)
>  		if (!smp_query_via(ni, &portid, IB_ATTR_NODE_INFO, 0,
>  				   ibd_timeout, ibmad_port))
>  			return -1;
> -		mad_decode_field(ni, IB_NODE_GUID_F, &(switch_guid));
> +		mad_decode_field(ni, IB_NODE_GUID_F, &(node_guid));
>  
> -		node = ibnd_find_node_guid(fabric, switch_guid);
> +		node = ibnd_find_node_guid(fabric, node_guid);
>  		if (node)
>  			print_node(node, NULL);
>  		else
> -- 
> 1.5.4.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] infiniband-diags/src/ibqueryerrors.c: Remove --all option and replace it with --switch, --ca, --router

[Ira Weiny]

On Tue, 29 Sep 2009 17:49:49 +0200
Sasha Khapyorsky <sashak-smomgflXvOZWk0Htik3J/w@public.gmane.org> wrote:

> Hi Ira,
> 
> On 15:09 Wed 23 Sep     , Ira Weiny wrote:
> > 
> > From: Ira Weiny <weiny2-i2BcT+NCU+M@public.gmane.org>
> > Date: Wed, 23 Sep 2009 11:38:11 -0700
> > Subject: [PATCH] infiniband-diags/src/ibqueryerrors.c: Remove --all option and replace it with --switch, --ca, --router
> > 
> > 	By default ibqueryerrors should print errors for all node types.
> > 	Adding the other options allows for the limitation of this output.
> > 
> > 	Also change the --switch option to be --node-guid which is really more
> > 	accurate and use "-G" for better compliance with other utilities.  "-S"
> > 	is left in for backward compatibility for the time being.
> > 
> > 	Update the man page
> > 
> > Signed-off-by: Ira Weiny <weiny2-i2BcT+NCU+M@public.gmane.org>
> 
> Applied with comments below. Thanks.
> 
> > ---
> >  infiniband-diags/man/ibqueryerrors.8 |   62 +++++++++++++++++++-----------
> >  infiniband-diags/src/ibqueryerrors.c |   70 +++++++++++++++++++++++++---------
> >  2 files changed, 92 insertions(+), 40 deletions(-)
> > 
> > diff --git a/infiniband-diags/man/ibqueryerrors.8 b/infiniband-diags/man/ibqueryerrors.8
> > index a327f3b..8f83a7b 100644
> > --- a/infiniband-diags/man/ibqueryerrors.8
> > +++ b/infiniband-diags/man/ibqueryerrors.8
> > @@ -5,7 +5,7 @@ ibqueryerrors.pl \- query and report non-zero IB port counters
> >  
> >  .SH SYNOPSIS
> >  .B ibqueryerrors.pl
> > -[-a -c -r -R -C <ca_name> -P <ca_port> -s <err1,err2,...> -S <switch_guid>
> > +[-s <err1,err2,...> -c -r -C <ca_name> -P <ca_port> -s <err1,err2,...> -G <node_guid>
> 
> '-s' is listed twice. I'm fixing this.

Thanks.

[snip]

> >  
> > -	if (!all_nodes && node->type != IB_NODE_SWITCH)
> > +	if ((type & node_type_to_print) == 0)
> >  		return;
> >  
> >  	if (node->type == IB_NODE_SWITCH && node->smaenhsp0)
> > @@ -361,11 +379,24 @@ static int process_opt(void *context, int ch, char *optarg)
> >  		data_counters++;
> >  		break;
> >  	case 3:
> > -		all_nodes++;
> > +		if (node_type_to_print == PRINT_ALL)
> > +			node_type_to_print = 0;
> > +		node_type_to_print |= PRINT_SWITCH;
> > +		break;
> > +	case 4:
> > +		if (node_type_to_print == PRINT_ALL)
> > +			node_type_to_print = 0;
> > +		node_type_to_print |= PRINT_CA;
> > +		break;
> > +	case 5:
> > +		if (node_type_to_print == PRINT_ALL)
> > +			node_type_to_print = 0;
> > +		node_type_to_print |= PRINT_ROUTER;
> 
> Instead of repeating 'node_type_to_print' check its setup could be done
> as:
> 
> 	node_type_to_print = 0;
> 	process_options()...
> 	if (!node_type_to_print)
> 		node_type_to_print = ALL;
> 
> Adding this as separate patch.

Yes that patch is better.  Thanks,

> 
> >  		break;
> > +	case 'G':
> >  	case 'S':
> > -		switch_guid_str = optarg;
> > -		switch_guid = strtoull(optarg, 0, 0);
> > +		node_guid_str = optarg;
> > +		node_guid = strtoull(optarg, 0, 0);
> >  		break;
> >  	case 'D':
> >  		dr_path = strdup(optarg);
> 
> Some generic thoughts.
> 
> When -D, -S, -G and port cannot be resolved should this be an error
> instead of full fabric discovery and errors querying?

No this is not good for 2 reasons.

   1) if the SA is down the tool will still work by searching (slower but
      works)  This is really important because diags are used when things are
      not working.  So the SA being down or slow is a real possibility.[*]
   2) See below about link information...

[*] of course this does not apply to the -D option but it will never fail to
resolve.

> 
> When such port was resolved shouldn't we skip even partial discover as
> useless?

It is not useless.  The link information is printed if the "-r" option is
specified, like so...

10:32:43 > ./ibqueryerrors -S 0xb8cffff00490c -r
Errors for 0xb8cffff00490c "MT47396 Infiniscale-III Mellanox Technologies"
   GUID 0xb8cffff00490c port 10: [LinkDowned == 1]
       Link info:      8  10[  ] ==( 4X 5.0 Gbps Active/  LinkUp)==>  0x0008f10400411b18     15   24[  ] "ISR9024D Voltaire" ( )
   GUID 0xb8cffff00490c port 12: [RcvSwRelayErrors == 19] [XmtDiscards == 1]
       Link info:      8  12[  ] ==( 4X 5.0 Gbps Active/  LinkUp)==>             [  ] "" ( )
   GUID 0xb8cffff00490c port 20: [RcvSwRelayErrors == 5]
       Link info:      8  20[  ] ==( 4X 5.0 Gbps Active/  LinkUp)==>  0x0002c902002268c4     10    2[  ] "woprjr4" ( )

The partial discover gives us this information.

> 
> What about unifying -G, -D, -L options (target address type) usage with
> other intiniband-diags tools (implemented already with ibdiag_common)?

Well...  At the risk of being flamed...  I personally do not like the way
these options are implemented.  For example:

10:37:13 > smpquery -G 0xb8cffff00490c nodeinfo
smpquery: iberror: failed: operation '0xb8cffff00490c' not supported

WTF?  Ah, here is the "correct" syntax

10:37:21 > smpquery -G nodeinfo 0xb8cffff00490c
# Node info: Lid 8
BaseVers:........................1
...

This "correct" syntax is weird to me.  Why is the GUID being specified as
"nodeinfo"?  I admit it might be the way I process commands but I find myself
skipping around the command line to get the syntax right.

Another minor difference is that iblinkinfo and ibqueryerrors have default
behaviors if run without any address.  So it seems to make sense for the -G to
be an option with a parameter.  I will admit it can be made to work either
way, and I can "fix" it if you like.

Ira

> 
> Sasha
> 
> > @@ -399,8 +430,9 @@ int main(int argc, char **argv)
> >  		{"suppress-common", 'c', 0, NULL,
> >  		 "suppress some of the common counters"},
> >  		{"node-name-map", 1, 1, "<file>", "node name map file"},
> > -		{"switch", 'S', 1, "<switch_guid>",
> > -		 "query only <switch_guid> (hex format)"},
> > +		{"node-guid", 'G', 1, "<node_guid>", "query only <node_guid>"},
> > +		{"", 'S', 1, "<node_guid>",
> > +		 "Same as \"-G\" for backward compatibility"},
> >  		{"Direct", 'D', 1, "<dr_path>",
> >  		 "query only switch specified by <dr_path>"},
> >  		{"report-port", 'r', 0, NULL,
> > @@ -408,7 +440,9 @@ int main(int argc, char **argv)
> >  		{"GNDN", 'R', 0, NULL,
> >  		 "(This option is obsolete and does nothing)"},
> >  		{"data", 2, 0, NULL, "include the data counters in the output"},
> > -		{"all", 3, 0, NULL, "output all nodes (not just switches)"},
> > +		{"switch", 3, 0, NULL, "print data for switches only"},
> > +		{"ca", 4, 0, NULL, "print data for CA's only"},
> > +		{"router", 5, 0, NULL, "print data for routers only"},
> >  		{0}
> >  	};
> >  	char usage_args[] = "";
> > @@ -438,13 +472,13 @@ int main(int argc, char **argv)
> >  					       NULL, ibmad_port)) < 0)
> >  			IBWARN("Failed to resolve %s; attempting full scan\n",
> >  			       dr_path);
> > -	} else if (switch_guid_str) {
> > +	} else if (node_guid_str) {
> >  		if ((resolved =
> > -		     ib_resolve_portid_str_via(&portid, switch_guid_str,
> > +		     ib_resolve_portid_str_via(&portid, node_guid_str,
> >  					       IB_DEST_GUID, ibd_sm_id,
> >  					       ibmad_port)) >= 0)
> >  			IBWARN("Failed to resolve %s; attempting full scan\n",
> > -			       switch_guid_str);
> > +			       node_guid_str);
> >  	}
> >  
> >  	if (resolved >= 0)
> > @@ -463,13 +497,13 @@ int main(int argc, char **argv)
> >  
> >  	report_suppressed();
> >  
> > -	if (switch_guid_str) {
> > -		ibnd_node_t *node = ibnd_find_node_guid(fabric, switch_guid);
> > +	if (node_guid_str) {
> > +		ibnd_node_t *node = ibnd_find_node_guid(fabric, node_guid);
> >  		if (node)
> >  			print_node(node, NULL);
> >  		else
> >  			fprintf(stderr, "Failed to find node: %s\n",
> > -				switch_guid_str);
> > +				node_guid_str);
> >  	} else if (dr_path) {
> >  		ibnd_node_t *node = ibnd_find_node_dr(fabric, dr_path);
> >  		uint8_t ni[IB_SMP_DATA_SIZE];
> > @@ -477,9 +511,9 @@ int main(int argc, char **argv)
> >  		if (!smp_query_via(ni, &portid, IB_ATTR_NODE_INFO, 0,
> >  				   ibd_timeout, ibmad_port))
> >  			return -1;
> > -		mad_decode_field(ni, IB_NODE_GUID_F, &(switch_guid));
> > +		mad_decode_field(ni, IB_NODE_GUID_F, &(node_guid));
> >  
> > -		node = ibnd_find_node_guid(fabric, switch_guid);
> > +		node = ibnd_find_node_guid(fabric, node_guid);
> >  		if (node)
> >  			print_node(node, NULL);
> >  		else
> > -- 
> > 1.5.4.5
> > 


-- 
Ira Weiny
Math Programmer/Computer Scientist
Lawrence Livermore National Lab
925-423-8008
weiny2-i2BcT+NCU+M@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] infiniband-diags/ibqueryerrors: simplify node_type_to_print setup.

[Sasha Khapyorsky]

Siplify node_type_to_print setup.

Signed-off-by: Sasha Khapyorsky <sashak-smomgflXvOZWk0Htik3J/w@public.gmane.org>
---
 infiniband-diags/src/ibqueryerrors.c |   13 +++++--------
 1 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/infiniband-diags/src/ibqueryerrors.c b/infiniband-diags/src/ibqueryerrors.c
index 8a3c236..e67d338 100644
--- a/infiniband-diags/src/ibqueryerrors.c
+++ b/infiniband-diags/src/ibqueryerrors.c
@@ -64,12 +64,12 @@ char *node_guid_str = NULL;
 int sup_total = 0;
 enum MAD_FIELDS *suppressed_fields = NULL;
 char *dr_path = NULL;
+uint8_t node_type_to_print = 0;
 
-#define PRINT_ALL 0xFF /* all nodes default flag */
-uint8_t node_type_to_print = PRINT_ALL;
 #define PRINT_SWITCH 0x1
 #define PRINT_CA     0x2
 #define PRINT_ROUTER 0x4
+#define PRINT_ALL 0xFF /* all nodes default flag */
 
 static unsigned int get_max(unsigned int num)
 {
@@ -379,18 +379,12 @@ static int process_opt(void *context, int ch, char *optarg)
 		data_counters++;
 		break;
 	case 3:
-		if (node_type_to_print == PRINT_ALL)
-			node_type_to_print = 0;
 		node_type_to_print |= PRINT_SWITCH;
 		break;
 	case 4:
-		if (node_type_to_print == PRINT_ALL)
-			node_type_to_print = 0;
 		node_type_to_print |= PRINT_CA;
 		break;
 	case 5:
-		if (node_type_to_print == PRINT_ALL)
-			node_type_to_print = 0;
 		node_type_to_print |= PRINT_ROUTER;
 		break;
 	case 'G':
@@ -453,6 +447,9 @@ int main(int argc, char **argv)
 	argc -= optind;
 	argv += optind;
 
+	if (!node_type_to_print)
+		node_type_to_print = PRINT_ALL;
+
 	if (ibverbose)
 		ibnd_debug(1);
 
-- 
1.6.5.rc1

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html