From: KOSAKI Motohiro <kosaki.motohiro-+CUm20s59erQFUHtdCDX3A@public.gmane.org>
To: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Cc: kosaki.motohiro-+CUm20s59erQFUHtdCDX3A@public.gmane.org,
Bryan Donlan <bdonlan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ulrich Drepper <drepper-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Timo Sirainen <tss-X3B1VOXEql0@public.gmane.org>
Subject: Re: [resend][PATCH] Added PR_SET_PROCTITLE_AREA option for prctl()
Date: Tue, 13 Oct 2009 09:03:22 +0900 (JST) [thread overview]
Message-ID: <20091013083744.C747.A69D9226@jp.fujitsu.com> (raw)
In-Reply-To: <20091012122246.a941013b.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
> On Tue, 13 Oct 2009 04:03:45 +0900 (JST)
> KOSAKI Motohiro <kosaki.motohiro-+CUm20s59erQFUHtdCDX3A@public.gmane.org> wrote:
>
> > > Start simple. What's wrong with mutex_lock() on the reader and writer
> > > sides? rwsems might be OK too.
> > >
> > > In both cases we should think about whether persistent readers can
> > > block the writer excessively though.
> >
> > I thought your mention seems reasonable. then I mesured various locking
> > performance.
> >
> > no-contention read-read contetion read-write contention
> > w/o patch 4627 ms 7575 ms N/A
> > mutex 5717 ms 33872 ms (!) 14793 ms
> > rw-semaphoe 6846 ms 10734 ms 36156 ms (!)
> > seqlock 4754 ms 7558 ms 9373 ms
> >
> > Umm, seqlock is significantly better than other.
>
> Sure, but even the worst case there is 1,000,000 operations in 34
> seconds (yes?). 33 microseconds for a /proc read while under a specific
> local DoS attack is OK!
>
> If so then all implementations are acceptable and we should choose the
> simplest, most-obviously-correct one.
Hm, ok!
I had guessed you don't accept this slowness. but my guess was wrong.
I have no objection to use rw-semaphoe if you accept it.
WARNING: multiple messages have this Message-ID (diff)
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: kosaki.motohiro@jp.fujitsu.com, Bryan Donlan <bdonlan@gmail.com>,
linux-kernel@vger.kernel.org, Ulrich Drepper <drepper@redhat.com>,
linux-api@vger.kernel.org, Timo Sirainen <tss@iki.fi>
Subject: Re: [resend][PATCH] Added PR_SET_PROCTITLE_AREA option for prctl()
Date: Tue, 13 Oct 2009 09:03:22 +0900 (JST) [thread overview]
Message-ID: <20091013083744.C747.A69D9226@jp.fujitsu.com> (raw)
In-Reply-To: <20091012122246.a941013b.akpm@linux-foundation.org>
> On Tue, 13 Oct 2009 04:03:45 +0900 (JST)
> KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> wrote:
>
> > > Start simple. What's wrong with mutex_lock() on the reader and writer
> > > sides? rwsems might be OK too.
> > >
> > > In both cases we should think about whether persistent readers can
> > > block the writer excessively though.
> >
> > I thought your mention seems reasonable. then I mesured various locking
> > performance.
> >
> > no-contention read-read contetion read-write contention
> > w/o patch 4627 ms 7575 ms N/A
> > mutex 5717 ms 33872 ms (!) 14793 ms
> > rw-semaphoe 6846 ms 10734 ms 36156 ms (!)
> > seqlock 4754 ms 7558 ms 9373 ms
> >
> > Umm, seqlock is significantly better than other.
>
> Sure, but even the worst case there is 1,000,000 operations in 34
> seconds (yes?). 33 microseconds for a /proc read while under a specific
> local DoS attack is OK!
>
> If so then all implementations are acceptable and we should choose the
> simplest, most-obviously-correct one.
Hm, ok!
I had guessed you don't accept this slowness. but my guess was wrong.
I have no objection to use rw-semaphoe if you accept it.
next prev parent reply other threads:[~2009-10-13 0:03 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-09 4:50 [resend][PATCH] Added PR_SET_PROCTITLE_AREA option for prctl() KOSAKI Motohiro
2009-10-09 4:50 ` KOSAKI Motohiro
2009-10-10 0:13 ` Andrew Morton
2009-10-10 2:22 ` Bryan Donlan
[not found] ` <3e8340490910091922g7891b31al649e91f15ffae687-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-10-10 2:42 ` Andrew Morton
2009-10-10 2:42 ` Andrew Morton
[not found] ` <20091009194250.eb76e338.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2009-10-10 2:57 ` Bryan Donlan
2009-10-10 2:57 ` Bryan Donlan
2009-10-10 6:32 ` KOSAKI Motohiro
[not found] ` <2f11576a0910092332s6e0e3dcs35864e3a2164be0-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-10-10 6:39 ` Andrew Morton
2009-10-10 6:39 ` Andrew Morton
2009-10-12 19:03 ` KOSAKI Motohiro
[not found] ` <20091013022335.C741.A69D9226-+CUm20s59erQFUHtdCDX3A@public.gmane.org>
2009-10-12 19:22 ` Andrew Morton
2009-10-12 19:22 ` Andrew Morton
[not found] ` <20091012122246.a941013b.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2009-10-13 0:03 ` KOSAKI Motohiro [this message]
2009-10-13 0:03 ` KOSAKI Motohiro
2009-10-10 7:11 ` Bryan Donlan
[not found] ` <3e8340490910100011u17497293o613334c64f1543c8-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-10-12 19:03 ` KOSAKI Motohiro
2009-10-12 19:03 ` KOSAKI Motohiro
[not found] ` <20091013031853.C744.A69D9226-+CUm20s59erQFUHtdCDX3A@public.gmane.org>
2009-10-12 19:33 ` Bryan Donlan
2009-10-12 19:33 ` Bryan Donlan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091013083744.C747.A69D9226@jp.fujitsu.com \
--to=kosaki.motohiro-+cum20s59erqfuhtdcdx3a@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=bdonlan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=drepper-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-api-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tss-X3B1VOXEql0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.