* [PATCH 00/12] Staging: rt28x0 cleanups
@ 2009-10-21 20:43 Bartlomiej Zolnierkiewicz
2009-10-21 20:43 ` [PATCH 01/12] Staging: rt28x0: remove unused ->eewrite methods Bartlomiej Zolnierkiewicz
` (11 more replies)
0 siblings, 12 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:43 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
Cleanups for rt28x0 drivers (almost 8 KLOC gone) removing private
driver parameters, ioctls, WEXT handlers and unused features..
Tested with RT2860 and RT3070 (both still work for me :).
diffstat:
drivers/staging/rt2860/Makefile | 2
drivers/staging/rt2860/chip/rtmp_phy.h | 36
drivers/staging/rt2860/chips/rt30xx.c | 2
drivers/staging/rt2860/common/cmm_asic.c | 6
drivers/staging/rt2860/common/cmm_info.c | 4039 +++++-----------------------
drivers/staging/rt2860/common/cmm_mac_pci.c | 7
drivers/staging/rt2860/common/cmm_profile.c | 1779 ------------
drivers/staging/rt2860/common/crypt_hmac.c | 85
drivers/staging/rt2860/common/crypt_sha2.c | 257 -
drivers/staging/rt2860/common/ee_efuse.c | 1145 -------
drivers/staging/rt2860/common/ee_prom.c | 48
drivers/staging/rt2860/common/eeprom.c | 6
drivers/staging/rt2860/common/mlme.c | 1
drivers/staging/rt2860/common/rtmp_init.c | 21
drivers/staging/rt2860/common/rtmp_mcu.c | 2
drivers/staging/rt2860/crypt_hmac.h | 11
drivers/staging/rt2860/crypt_sha2.h | 28
drivers/staging/rt2860/eeprom.h | 15
drivers/staging/rt2860/oid.h | 19
drivers/staging/rt2860/pci_main_dev.c | 35
drivers/staging/rt2860/rt_config.h | 8
drivers/staging/rt2860/rt_linux.c | 30
drivers/staging/rt2860/rt_linux.h | 10
drivers/staging/rt2860/rt_main_dev.c | 6
drivers/staging/rt2860/rt_profile.c | 95
drivers/staging/rt2860/rtmp.h | 300 --
drivers/staging/rt2860/rtmp_chip.h | 4
drivers/staging/rt2860/rtmp_def.h | 9
drivers/staging/rt2860/sta/connect.c | 1
drivers/staging/rt2860/sta_ioctl.c | 1315 ---------
drivers/staging/rt2860/usb_main_dev.c | 7
drivers/staging/rt2870/Makefile | 2
drivers/staging/rt2870/common/rtusb_io.c | 11
33 files changed, 819 insertions(+), 8523 deletions(-)
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 01/12] Staging: rt28x0: remove unused ->eewrite methods
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:43 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:43 ` [PATCH 02/12] Staging: rt28x0: remove unused code from common/ee_efuse-c Bartlomiej Zolnierkiewicz
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:43 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove unused ->eewrite methods
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/common/ee_efuse.c | 17 ----------
drivers/staging/rt2860/common/ee_prom.c | 48 -------------------------------
drivers/staging/rt2860/common/eeprom.c | 3 -
drivers/staging/rt2860/eeprom.h | 15 ---------
drivers/staging/rt2860/rtmp.h | 1
drivers/staging/rt2860/rtmp_chip.h | 4 --
drivers/staging/rt2870/common/rtusb_io.c | 11 -------
7 files changed, 99 deletions(-)
Index: b/drivers/staging/rt2860/common/ee_efuse.c
===================================================================
--- a/drivers/staging/rt2860/common/ee_efuse.c
+++ b/drivers/staging/rt2860/common/ee_efuse.c
@@ -1271,23 +1271,6 @@ int rtmp_ee_efuse_read16(
return (*pValue);
}
-
-int rtmp_ee_efuse_write16(
- IN RTMP_ADAPTER *pAd,
- IN USHORT Offset,
- IN USHORT data)
-{
- if(pAd->bFroceEEPROMBuffer||pAd->bEEPROMFile)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Write to EEPROM Buffer\n"));
- NdisMoveMemory(&(pAd->EEPROMImage[Offset]), &data, 2);
- }
- else
- eFuseWriteRegisters(pAd, Offset, 2, &data);
- return 0;
-}
-
-
int RtmpEfuseSupportCheck(
IN RTMP_ADAPTER *pAd)
{
Index: b/drivers/staging/rt2860/common/ee_prom.c
===================================================================
--- a/drivers/staging/rt2860/common/ee_prom.c
+++ b/drivers/staging/rt2860/common/ee_prom.c
@@ -220,51 +220,3 @@ int rtmp_ee_prom_read16(
return NDIS_STATUS_SUCCESS;
}
-
-
-int rtmp_ee_prom_write16(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Data)
-{
- UINT32 x;
-
-
- Offset /= 2;
-
- EWEN(pAd);
-
- // reset bits and set EECS
- RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
- x &= ~(EEDI | EEDO | EESK);
- x |= EECS;
- RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-
- // patch can not access e-Fuse issue
- if (!(IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)))
- {
- // kick a pulse
- RaiseClock(pAd, &x);
- LowerClock(pAd, &x);
- }
-
- // output the read_opcode ,register number and data in that order
- ShiftOutBits(pAd, EEPROM_WRITE_OPCODE, 3);
- ShiftOutBits(pAd, Offset, pAd->EEPROMAddressNum);
- ShiftOutBits(pAd, Data, 16); // 16-bit access
-
- // read DO status
- RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
- EEpromCleanup(pAd);
-
- RTMPusecDelay(10000); //delay for twp(MAX)=10ms
-
- EWDS(pAd);
-
- EEpromCleanup(pAd);
-
-
- return NDIS_STATUS_SUCCESS;
-
-}
Index: b/drivers/staging/rt2860/common/eeprom.c
===================================================================
--- a/drivers/staging/rt2860/common/eeprom.c
+++ b/drivers/staging/rt2860/common/eeprom.c
@@ -66,7 +66,6 @@ INT RtmpChipOpsEepromHook(
{
pChipOps->eeinit = eFuse_init;
pChipOps->eeread = rtmp_ee_efuse_read16;
- pChipOps->eewrite = rtmp_ee_efuse_write16;
return 0 ;
}
else
@@ -83,14 +82,12 @@ INT RtmpChipOpsEepromHook(
case RTMP_DEV_INF_PCI:
pChipOps->eeinit = NULL;
pChipOps->eeread = rtmp_ee_prom_read16;
- pChipOps->eewrite = rtmp_ee_prom_write16;
break;
#endif // RTMP_PCI_SUPPORT //
#ifdef RTMP_USB_SUPPORT
case RTMP_DEV_INF_USB:
pChipOps->eeinit = NULL;
pChipOps->eeread = RTUSBReadEEPROM16;
- pChipOps->eewrite = RTUSBWriteEEPROM16;
break;
#endif // RTMP_USB_SUPPORT //
Index: b/drivers/staging/rt2860/eeprom.h
===================================================================
--- a/drivers/staging/rt2860/eeprom.h
+++ b/drivers/staging/rt2860/eeprom.h
@@ -48,11 +48,6 @@ int rtmp_ee_prom_read16(
IN PRTMP_ADAPTER pAd,
IN USHORT Offset,
OUT USHORT *pValue);
-
-int rtmp_ee_prom_write16(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT value);
#endif // RTMP_PCI_SUPPORT //
#ifdef RTMP_USB_SUPPORT
/*************************************************************************
@@ -62,11 +57,6 @@ NTSTATUS RTUSBReadEEPROM16(
IN PRTMP_ADAPTER pAd,
IN USHORT offset,
OUT PUSHORT pData);
-
-NTSTATUS RTUSBWriteEEPROM16(
- IN RTMP_ADAPTER *pAd,
- IN USHORT offset,
- IN USHORT value);
#endif // RTMP_USB_SUPPORT //
#ifdef RT30xx
@@ -75,11 +65,6 @@ int rtmp_ee_efuse_read16(
IN RTMP_ADAPTER *pAd,
IN USHORT Offset,
OUT USHORT *pValue);
-
-int rtmp_ee_efuse_write16(
- IN RTMP_ADAPTER *pAd,
- IN USHORT Offset,
- IN USHORT data);
#endif // RTMP_EFUSE_SUPPORT //
#endif // RT30xx //
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -1790,7 +1790,6 @@ struct _RTMP_CHIP_OP_
/* Calibration access related callback functions */
int (*eeinit)(RTMP_ADAPTER *pAd); /* int (*eeinit)(RTMP_ADAPTER *pAd); */
int (*eeread)(RTMP_ADAPTER *pAd, USHORT offset, PUSHORT pValue); /* int (*eeread)(RTMP_ADAPTER *pAd, int offset, PUSHORT pValue); */
- int (*eewrite)(RTMP_ADAPTER *pAd, USHORT offset, USHORT value);; /* int (*eewrite)(RTMP_ADAPTER *pAd, int offset, USHORT value); */
/* MCU related callback functions */
int (*loadFirmware)(RTMP_ADAPTER *pAd); /* int (*loadFirmware)(RTMP_ADAPTER *pAd); */
Index: b/drivers/staging/rt2860/rtmp_chip.h
===================================================================
--- a/drivers/staging/rt2860/rtmp_chip.h
+++ b/drivers/staging/rt2860/rtmp_chip.h
@@ -167,10 +167,6 @@
#define RT28xx_EEPROM_READ16(_pAd, _offset, _value) \
(_pAd)->chipOps.eeread((RTMP_ADAPTER *)(_pAd), (USHORT)(_offset), (PUSHORT)&(_value))
-#define RT28xx_EEPROM_WRITE16(_pAd, _offset, _value) \
- (_pAd)->chipOps.eewrite((RTMP_ADAPTER *)(_pAd), (USHORT)(_offset), (USHORT)(_value))
-
-
// -------------------------------------------------------------------
// E2PROM data layout
Index: b/drivers/staging/rt2870/common/rtusb_io.c
===================================================================
--- a/drivers/staging/rt2870/common/rtusb_io.c
+++ b/drivers/staging/rt2870/common/rtusb_io.c
@@ -619,17 +619,6 @@ NTSTATUS RTUSBReadEEPROM16(
}
-NTSTATUS RTUSBWriteEEPROM16(
- IN RTMP_ADAPTER *pAd,
- IN USHORT offset,
- IN USHORT value)
-{
- USHORT tmpVal;
-
- tmpVal = cpu2le16(value);
- return RTUSBWriteEEPROM(pAd, offset, (PUCHAR)&(tmpVal), 2);
-}
-
/*
========================================================================
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 02/12] Staging: rt28x0: remove unused code from common/ee_efuse-c
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
2009-10-21 20:43 ` [PATCH 01/12] Staging: rt28x0: remove unused ->eewrite methods Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:43 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 03/12] Staging: rt28x0: remove private RTPRIV_IOCTL_SET ioctl Bartlomiej Zolnierkiewicz
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:43 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove unused code from common/ee_efuse-c
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/common/ee_efuse.c | 340 -------------------------------
drivers/staging/rt2860/rtmp.h | 12 -
2 files changed, 352 deletions(-)
Index: b/drivers/staging/rt2860/common/ee_efuse.c
===================================================================
--- a/drivers/staging/rt2860/common/ee_efuse.c
+++ b/drivers/staging/rt2860/common/ee_efuse.c
@@ -67,31 +67,6 @@ typedef union _EFUSE_CTRL_STRUC {
UINT32 word;
} EFUSE_CTRL_STRUC, *PEFUSE_CTRL_STRUC;
-static UCHAR eFuseReadRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- OUT USHORT* pData);
-
-static VOID eFuseReadPhysical(
- IN PRTMP_ADAPTER pAd,
- IN PUSHORT lpInBuffer,
- IN ULONG nInBufferSize,
- OUT PUSHORT lpOutBuffer,
- IN ULONG nOutBufferSize);
-
-static VOID eFusePhysicalWriteRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- OUT USHORT* pData);
-
-static NTSTATUS eFuseWriteRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- IN USHORT* pData);
-
static VOID eFuseWritePhysical(
IN PRTMP_ADAPTER pAd,
PUSHORT lpInBuffer,
@@ -306,37 +281,6 @@ static VOID eFuseReadPhysical(
========================================================================
*/
-NTSTATUS eFuseRead(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- OUT PUCHAR pData,
- IN USHORT Length)
-{
- USHORT* pOutBuf = (USHORT*)pData;
- NTSTATUS Status = STATUS_SUCCESS;
- UCHAR EFSROM_AOUT;
- int i;
-
- for(i=0; i<Length; i+=2)
- {
- EFSROM_AOUT = eFuseReadRegisters(pAd, Offset+i, 2, &pOutBuf[i/2]);
- }
- return Status;
-}
-
-/*
-========================================================================
-
- Routine Description:
-
- Arguments:
-
- Return Value:
-
- Note:
-
-========================================================================
-*/
static VOID eFusePhysicalWriteRegisters(
IN PRTMP_ADAPTER pAd,
IN USHORT Offset,
@@ -450,247 +394,6 @@ static VOID eFusePhysicalWriteRegisters(
========================================================================
*/
-static NTSTATUS eFuseWriteRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- IN USHORT* pData)
-{
- USHORT i,Loop=0;
- USHORT eFuseData;
- USHORT LogicalAddress, BlkNum = 0xffff;
- UCHAR EFSROM_AOUT;
-
- USHORT addr,tmpaddr, InBuf[3], tmpOffset;
- USHORT buffer[8];
- BOOLEAN bWriteSuccess = TRUE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters Offset=%x, pData=%x\n", Offset, *pData));
-
- //Step 0. find the entry in the mapping table
- //The address of EEPROM is 2-bytes alignment.
- //The last bit is used for alignment, so it must be 0.
- tmpOffset = Offset & 0xfffe;
- EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
-
- if( EFSROM_AOUT == 0x3f)
- { //find available logical address pointer
- //the logical address does not exist, find an empty one
- //from the first address of block 45=16*45=0x2d0 to the last address of block 47
- //==>48*16-3(reserved)=2FC
- for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
- {
- //Retrive the logical block nubmer form each logical address pointer
- //It will access two logical address pointer each time.
- eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
- if( (LogicalAddress & 0xff) == 0)
- {//Not used logical address pointer
- BlkNum = i-EFUSE_USAGE_MAP_START;
- break;
- }
- else if(( (LogicalAddress >> 8) & 0xff) == 0)
- {//Not used logical address pointer
- if (i != EFUSE_USAGE_MAP_END)
- {
- BlkNum = i-EFUSE_USAGE_MAP_START+1;
- }
- break;
- }
- }
- }
- else
- {
- BlkNum = EFSROM_AOUT;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
-
- if(BlkNum == 0xffff)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
- return FALSE;
- }
-
- //Step 1. Save data of this block which is pointed by the avaible logical address pointer
- // read and save the original block data
- for(i =0; i<8; i++)
- {
- addr = BlkNum * 0x10 ;
-
- InBuf[0] = addr+2*i;
- InBuf[1] = 2;
- InBuf[2] = 0x0;
-
- eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-
- buffer[i] = InBuf[2];
- }
-
- //Step 2. Update the data in buffer, and write the data to Efuse
- buffer[ (Offset >> 1) % 8] = pData[0];
-
- do
- { Loop++;
- //Step 3. Write the data to Efuse
- if(!bWriteSuccess)
- {
- for(i =0; i<8; i++)
- {
- addr = BlkNum * 0x10 ;
-
- InBuf[0] = addr+2*i;
- InBuf[1] = 2;
- InBuf[2] = buffer[i];
-
- eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
- }
- }
- else
- {
- addr = BlkNum * 0x10 ;
-
- InBuf[0] = addr+(Offset % 16);
- InBuf[1] = 2;
- InBuf[2] = pData[0];
-
- eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
- }
-
- //Step 4. Write mapping table
- addr = EFUSE_USAGE_MAP_START+BlkNum;
-
- tmpaddr = addr;
-
- if(addr % 2 != 0)
- addr = addr -1;
- InBuf[0] = addr;
- InBuf[1] = 2;
-
- //convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
- tmpOffset = Offset;
- tmpOffset >>= 4;
- tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^ (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
- tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
-
- // write the logical address
- if(tmpaddr%2 != 0)
- InBuf[2] = tmpOffset<<8;
- else
- InBuf[2] = tmpOffset;
-
- eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
-
- //Step 5. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
- bWriteSuccess = TRUE;
- for(i =0; i<8; i++)
- {
- addr = BlkNum * 0x10 ;
-
- InBuf[0] = addr+2*i;
- InBuf[1] = 2;
- InBuf[2] = 0x0;
-
- eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-
- if(buffer[i] != InBuf[2])
- {
- bWriteSuccess = FALSE;
- break;
- }
- }
-
- //Step 6. invlidate mapping entry and find a free mapping entry if not succeed
- if (!bWriteSuccess)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess BlkNum = %d\n", BlkNum));
-
- // the offset of current mapping entry
- addr = EFUSE_USAGE_MAP_START+BlkNum;
-
- //find a new mapping entry
- BlkNum = 0xffff;
- for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
- {
- eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
- if( (LogicalAddress & 0xff) == 0)
- {
- BlkNum = i-EFUSE_USAGE_MAP_START;
- break;
- }
- else if(( (LogicalAddress >> 8) & 0xff) == 0)
- {
- if (i != EFUSE_USAGE_MAP_END)
- {
- BlkNum = i+1-EFUSE_USAGE_MAP_START;
- }
- break;
- }
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess new BlkNum = %d\n", BlkNum));
- if(BlkNum == 0xffff)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
- return FALSE;
- }
-
- //invalidate the original mapping entry if new entry is not found
- tmpaddr = addr;
-
- if(addr % 2 != 0)
- addr = addr -1;
- InBuf[0] = addr;
- InBuf[1] = 2;
-
- eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-
- // write the logical address
- if(tmpaddr%2 != 0)
- {
- // Invalidate the high byte
- for (i=8; i<15; i++)
- {
- if( ( (InBuf[2] >> i) & 0x01) == 0)
- {
- InBuf[2] |= (0x1 <<i);
- break;
- }
- }
- }
- else
- {
- // invalidate the low byte
- for (i=0; i<8; i++)
- {
- if( ( (InBuf[2] >> i) & 0x01) == 0)
- {
- InBuf[2] |= (0x1 <<i);
- break;
- }
- }
- }
- eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
- }
- }
- while (!bWriteSuccess&&Loop<2);
- if(!bWriteSuccess)
- DBGPRINT(RT_DEBUG_ERROR,("Efsue Write Failed!!\n"));
- return TRUE;
-}
-
-
-/*
-========================================================================
-
- Routine Description:
-
- Arguments:
-
- Return Value:
-
- Note:
-
-========================================================================
-*/
static VOID eFuseWritePhysical(
IN PRTMP_ADAPTER pAd,
PUSHORT lpInBuffer,
@@ -723,49 +426,6 @@ static VOID eFuseWritePhysical(
}
}
-
-/*
-========================================================================
-
- Routine Description:
-
- Arguments:
-
- Return Value:
-
- Note:
-
-========================================================================
-*/
-NTSTATUS eFuseWrite(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN PUCHAR pData,
- IN USHORT length)
-{
- int i;
- USHORT* pValueX = (PUSHORT) pData; //value ...
-
- // The input value=3070 will be stored as following
- // Little-endian S | S Big-endian
- // addr 1 0 | 0 1
- // Ori-V 30 70 | 30 70
- // After swapping
- // 30 70 | 70 30
- // Casting
- // 3070 | 7030 (x)
- // The swapping should be removed for big-endian
- for(i=0; i<length; i+=2)
- {
- eFuseWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
- }
-
- return TRUE;
-}
-
-
-
-
/*
========================================================================
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -4052,18 +4052,6 @@ VOID eFuseGetFreeBlockCount(IN PRTMP_ADA
INT eFuse_init(
IN PRTMP_ADAPTER pAd);
-
-NTSTATUS eFuseRead(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- OUT PUCHAR pData,
- IN USHORT Length);
-
-NTSTATUS eFuseWrite(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN PUCHAR pData,
- IN USHORT length);
//2008/09/11:KH add to support efuse-->
#endif // RTMP_EFUSE_SUPPORT //
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 03/12] Staging: rt28x0: remove private RTPRIV_IOCTL_SET ioctl
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
2009-10-21 20:43 ` [PATCH 01/12] Staging: rt28x0: remove unused ->eewrite methods Bartlomiej Zolnierkiewicz
2009-10-21 20:43 ` [PATCH 02/12] Staging: rt28x0: remove unused code from common/ee_efuse-c Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:44 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 04/12] Staging: rt28x0: remove private RTPRIV_IOCTL_GSITESURVEY ioctl Bartlomiej Zolnierkiewicz
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove private RTPRIV_IOCTL_SET ioctl
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/sta_ioctl.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
Index: b/drivers/staging/rt2860/sta_ioctl.c
===================================================================
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -2978,6 +2978,7 @@ INT rt28xx_sta_ioctl(
case SIOCSIWRETRY: //set retry limits and lifetime
case RT_PRIV_IOCTL:
case RT_PRIV_IOCTL_EXT:
+ case RTPRIV_IOCTL_SET:
Status = -EOPNOTSUPP;
break;
case SIOCGIWPRIV:
@@ -2990,11 +2991,6 @@ INT rt28xx_sta_ioctl(
Status = -EFAULT;
}
break;
- case RTPRIV_IOCTL_SET:
- if(access_ok(VERIFY_READ, wrq->u.data.pointer, wrq->u.data.length) != TRUE)
- break;
- rt_ioctl_setparam(net_dev, NULL, NULL, wrq->u.data.pointer);
- break;
case RTPRIV_IOCTL_GSITESURVEY:
RTMPIoctlGetSiteSurvey(pAd, wrq);
break;
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 04/12] Staging: rt28x0: remove private RTPRIV_IOCTL_GSITESURVEY ioctl
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
` (2 preceding siblings ...)
2009-10-21 20:44 ` [PATCH 03/12] Staging: rt28x0: remove private RTPRIV_IOCTL_SET ioctl Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:44 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 05/12] Staging: rt28x0: remove private WEXT handlers Bartlomiej Zolnierkiewicz
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove private RTPRIV_IOCTL_GSITESURVEY ioctl
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/common/cmm_info.c | 57 -------------------------------
drivers/staging/rt2860/rtmp.h | 12 ------
drivers/staging/rt2860/sta_ioctl.c | 4 --
3 files changed, 1 insertion(+), 72 deletions(-)
Index: b/drivers/staging/rt2860/common/cmm_info.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_info.c
+++ b/drivers/staging/rt2860/common/cmm_info.c
@@ -1970,63 +1970,6 @@ VOID RTMPCommSiteSurveyData(
return;
}
-VOID RTMPIoctlGetSiteSurvey(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq)
-{
- PSTRING msg;
- INT i=0;
- INT WaitCnt;
- INT Status=0;
- INT max_len = LINE_LEN;
- PBSS_ENTRY pBss;
-
-
- os_alloc_mem(NULL, (PUCHAR *)&msg, sizeof(CHAR)*((MAX_LEN_OF_BSS_TABLE)*max_len));
-
- if (msg == NULL)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - msg memory alloc fail.\n"));
- return;
- }
-
- memset(msg, 0 ,(MAX_LEN_OF_BSS_TABLE)*max_len );
- sprintf(msg,"%s","\n");
- sprintf(msg+strlen(msg),"%-4s%-33s%-20s%-23s%-9s%-7s%-7s%-3s\n",
- "Ch", "SSID", "BSSID", "Security", "Siganl(%)", "W-Mode", " ExtCH"," NT");
-
-
-
- WaitCnt = 0;
- pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
- while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200))
- OS_WAIT(500);
-
- for(i=0; i<pAdapter->ScanTab.BssNr ;i++)
- {
- pBss = &pAdapter->ScanTab.BssEntry[i];
-
- if( pBss->Channel==0)
- break;
-
- if((strlen(msg)+max_len ) >= IW_SCAN_MAX_DATA)
- break;
-
-
- RTMPCommSiteSurveyData(msg, pBss);
-
-
- }
-
- pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
- wrq->u.data.length = strlen(msg);
- Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
- DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - wrq->u.data.length = %d\n", wrq->u.data.length));
- os_free_mem(NULL, (PUCHAR)msg);
-}
-
-
#define MAC_LINE_LEN (14+4+4+10+10+10+6+6) // Addr+aid+psm+datatime+rxbyte+txbyte+current tx rate+last tx rate
VOID RTMPIoctlGetMacTable(
IN PRTMP_ADAPTER pAd,
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -4991,18 +4991,6 @@ PNDIS_PACKET RTMPDeFragmentDataFrame(
IN PRTMP_ADAPTER pAd,
IN RX_BLK *pRxBlk);
-////////////////////////////////////////
-
-VOID RTMPIoctlGetSiteSurvey(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq);
-
-
-
-
-
-
-
enum {
DIDmsg_lnxind_wlansniffrm = 0x00000044,
DIDmsg_lnxind_wlansniffrm_hosttime = 0x00010044,
Index: b/drivers/staging/rt2860/sta_ioctl.c
===================================================================
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -2979,6 +2979,7 @@ INT rt28xx_sta_ioctl(
case RT_PRIV_IOCTL:
case RT_PRIV_IOCTL_EXT:
case RTPRIV_IOCTL_SET:
+ case RTPRIV_IOCTL_GSITESURVEY:
Status = -EOPNOTSUPP;
break;
case SIOCGIWPRIV:
@@ -2991,9 +2992,6 @@ INT rt28xx_sta_ioctl(
Status = -EFAULT;
}
break;
- case RTPRIV_IOCTL_GSITESURVEY:
- RTMPIoctlGetSiteSurvey(pAd, wrq);
- break;
case SIOCETHTOOL:
break;
default:
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 05/12] Staging: rt28x0: remove private WEXT handlers
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
` (3 preceding siblings ...)
2009-10-21 20:44 ` [PATCH 04/12] Staging: rt28x0: remove private RTPRIV_IOCTL_GSITESURVEY ioctl Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:44 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 06/12] Staging: rt28x0: remove support for private driver parameters Bartlomiej Zolnierkiewicz
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove private WEXT handlers
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/common/cmm_info.c | 3982 +++++--------------------------
drivers/staging/rt2860/rtmp.h | 204 -
drivers/staging/rt2860/sta_ioctl.c | 1305 ----------
3 files changed, 767 insertions(+), 4724 deletions(-)
Index: b/drivers/staging/rt2860/common/cmm_info.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_info.c
+++ b/drivers/staging/rt2860/common/cmm_info.c
@@ -27,3380 +27,930 @@
#include "../rt_config.h"
+/*
+ ========================================================================
-INT Show_SSID_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_WirelessMode_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_TxBurst_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_TxPreamble_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_TxPower_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_Channel_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_BGProtection_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_RTSThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_FragThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtBw_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtMcs_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtGi_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtOpMode_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtExtcha_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtMpduDensity_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtBaWinSize_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtRdg_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtAmsdu_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_HtAutoBa_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_CountryRegion_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_CountryRegionABand_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_CountryCode_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-#ifdef AGGREGATION_SUPPORT
-INT Show_PktAggregate_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-#endif // AGGREGATION_SUPPORT //
-
-#ifdef WMM_SUPPORT
-INT Show_WmmCapable_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-#endif // WMM_SUPPORT //
-
-INT Show_IEEE80211H_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_NetworkType_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-
-INT Show_AuthMode_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_EncrypType_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_DefaultKeyID_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_Key1_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_Key2_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_Key3_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_Key4_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-INT Show_WPAPSK_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf);
-
-static struct {
- PSTRING name;
- INT (*show_proc)(PRTMP_ADAPTER pAdapter, PSTRING arg);
-} *PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC, RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC[] = {
- {"SSID", Show_SSID_Proc},
- {"WirelessMode", Show_WirelessMode_Proc},
- {"TxBurst", Show_TxBurst_Proc},
- {"TxPreamble", Show_TxPreamble_Proc},
- {"TxPower", Show_TxPower_Proc},
- {"Channel", Show_Channel_Proc},
- {"BGProtection", Show_BGProtection_Proc},
- {"RTSThreshold", Show_RTSThreshold_Proc},
- {"FragThreshold", Show_FragThreshold_Proc},
- {"HtBw", Show_HtBw_Proc},
- {"HtMcs", Show_HtMcs_Proc},
- {"HtGi", Show_HtGi_Proc},
- {"HtOpMode", Show_HtOpMode_Proc},
- {"HtExtcha", Show_HtExtcha_Proc},
- {"HtMpduDensity", Show_HtMpduDensity_Proc},
- {"HtBaWinSize", Show_HtBaWinSize_Proc},
- {"HtRdg", Show_HtRdg_Proc},
- {"HtAmsdu", Show_HtAmsdu_Proc},
- {"HtAutoBa", Show_HtAutoBa_Proc},
- {"CountryRegion", Show_CountryRegion_Proc},
- {"CountryRegionABand", Show_CountryRegionABand_Proc},
- {"CountryCode", Show_CountryCode_Proc},
-#ifdef AGGREGATION_SUPPORT
- {"PktAggregate", Show_PktAggregate_Proc},
-#endif
-
-#ifdef WMM_SUPPORT
- {"WmmCapable", Show_WmmCapable_Proc},
-#endif
- {"IEEE80211H", Show_IEEE80211H_Proc},
- {"NetworkType", Show_NetworkType_Proc},
- {"AuthMode", Show_AuthMode_Proc},
- {"EncrypType", Show_EncrypType_Proc},
- {"DefaultKeyID", Show_DefaultKeyID_Proc},
- {"Key1", Show_Key1_Proc},
- {"Key2", Show_Key2_Proc},
- {"Key3", Show_Key3_Proc},
- {"Key4", Show_Key4_Proc},
- {"WPAPSK", Show_WPAPSK_Proc},
- {NULL, NULL}
-};
-
-/*
- ==========================================================================
- Description:
- Get Driver version.
-
- Return:
- ==========================================================================
-*/
-INT Set_DriverVersion_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
-
- DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Country Region.
- This command will not work, if the field of CountryRegion in eeprom is programmed.
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_CountryRegion_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- int retval;
-
-
- retval = RT_CfgSetCountryRegion(pAd, arg, BAND_24G);
- if (retval == FALSE)
- return FALSE;
-
- // if set country region, driver needs to be reset
- BuildChannelList(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegion_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegion));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Country Region for A band.
- This command will not work, if the field of CountryRegion in eeprom is programmed.
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_CountryRegionABand_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- int retval;
-
-
- retval = RT_CfgSetCountryRegion(pAd, arg, BAND_5G);
- if (retval == FALSE)
- return FALSE;
-
- // if set country region, driver needs to be reset
- BuildChannelList(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegionABand_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegionForABand));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Wireless Mode
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_WirelessMode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- INT success = TRUE;
-
- success = RT_CfgSetWirelessMode(pAd, arg);
- if (success)
- {
- {
- LONG WirelessMode = pAd->CommonCfg.PhyMode;
-
- RTMPSetPhyMode(pAd, WirelessMode);
- if (WirelessMode >= PHY_11ABGN_MIXED)
- {
- pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
- pAd->CommonCfg.REGBACapability.field.AutoBA = TRUE;
- }
- else
- {
- pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
- pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE;
- }
-
- // Set AdhocMode rates
- if (pAd->StaCfg.BssType == BSS_ADHOC)
- {
- MlmeUpdateTxRates(pAd, FALSE, 0);
- MakeIbssBeacon(pAd); // re-build BEACON frame
- AsicEnableIbssSync(pAd); // copy to on-chip memory
- }
- }
-
- // it is needed to set SSID to take effect
- SetCommonHT(pAd);
- DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%d)\n", pAd->CommonCfg.PhyMode));
- }
- else
- {
- DBGPRINT(RT_DEBUG_ERROR, ("Set_WirelessMode_Proc::parameters out of range\n"));
- }
-
- return success;
-}
-
-/*
- ==========================================================================
- Description:
- Set Channel
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Channel_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- INT success = TRUE;
- UCHAR Channel;
-
- Channel = (UCHAR) simple_strtol(arg, 0, 10);
-
- // check if this channel is valid
- if (ChannelSanity(pAd, Channel) == TRUE)
- {
- {
- pAd->CommonCfg.Channel = Channel;
-
- if (MONITOR_ON(pAd))
- {
- N_ChannelCheck(pAd);
- if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
- pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
- {
- N_SetCenCh(pAd);
- AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
- DBGPRINT(RT_DEBUG_TRACE, ("BW_40, control_channel(%d), CentralChannel(%d) \n",
- pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
- }
- else
- {
- AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.Channel);
- DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAd->CommonCfg.Channel));
- }
- }
- }
- success = TRUE;
- }
- else
- {
- success = FALSE;
- }
-
-
- if (success == TRUE)
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Channel_Proc::(Channel=%d)\n", pAd->CommonCfg.Channel));
-
- return success;
-}
-
-/*
- ==========================================================================
- Description:
- Set Short Slot Time Enable or Disable
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ShortSlot_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- int retval;
-
- retval = RT_CfgSetShortSlot(pAd, arg);
- if (retval == TRUE)
- DBGPRINT(RT_DEBUG_TRACE, ("Set_ShortSlot_Proc::(ShortSlot=%d)\n", pAd->CommonCfg.bUseShortSlotTime));
-
- return retval;
-}
-
-
-/*
- ==========================================================================
- Description:
- Set Tx power
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_TxPower_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- LONG TxPower;
- INT success = FALSE;
-
- TxPower = simple_strtol(arg, 0, 10);
- if (TxPower <= 100)
- {
- {
- pAd->CommonCfg.TxPowerDefault = TxPower;
- pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
- }
- success = TRUE;
- }
- else
- success = FALSE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPower_Proc::(TxPowerPercentage=%ld)\n", pAd->CommonCfg.TxPowerPercentage));
-
- return success;
-}
-
-/*
- ==========================================================================
- Description:
- Set 11B/11G Protection
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_BGProtection_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- switch (simple_strtol(arg, 0, 10))
- {
- case 0: //AUTO
- pAd->CommonCfg.UseBGProtection = 0;
- break;
- case 1: //Always On
- pAd->CommonCfg.UseBGProtection = 1;
- break;
- case 2: //Always OFF
- pAd->CommonCfg.UseBGProtection = 2;
- break;
- default: //Invalid argument
- return FALSE;
- }
-
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_BGProtection_Proc::(BGProtection=%ld)\n", pAd->CommonCfg.UseBGProtection));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set TxPreamble
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_TxPreamble_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- RT_802_11_PREAMBLE Preamble;
-
- Preamble = simple_strtol(arg, 0, 10);
-
-
- switch (Preamble)
- {
- case Rt802_11PreambleShort:
- pAd->CommonCfg.TxPreamble = Preamble;
-
- MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
- break;
- case Rt802_11PreambleLong:
- case Rt802_11PreambleAuto:
- // if user wants AUTO, initialize to LONG here, then change according to AP's
- // capability upon association.
- pAd->CommonCfg.TxPreamble = Preamble;
-
- MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
- break;
- default: //Invalid argument
- return FALSE;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPreamble_Proc::(TxPreamble=%ld)\n", pAd->CommonCfg.TxPreamble));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set RTS Threshold
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_RTSThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- NDIS_802_11_RTS_THRESHOLD RtsThresh;
-
- RtsThresh = simple_strtol(arg, 0, 10);
-
- if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD))
- pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
- else if (RtsThresh == 0)
- pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
- else
- return FALSE; //Invalid argument
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_RTSThreshold_Proc::(RTSThreshold=%d)\n", pAd->CommonCfg.RtsThreshold));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Fragment Threshold
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_FragThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
-
- FragThresh = simple_strtol(arg, 0, 10);
-
- if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
- {
- //Illegal FragThresh so we set it to default
- pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
- }
- else if (FragThresh % 2 == 1)
- {
- // The length of each fragment shall always be an even number of octets, except for the last fragment
- // of an MSDU or MMPDU, which may be either an even or an odd number of octets.
- pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1);
- }
- else
- {
- pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
- }
-
- {
- if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD)
- pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
- else
- pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set TxBurst
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_TxBurst_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- LONG TxBurst;
-
- TxBurst = simple_strtol(arg, 0, 10);
- if (TxBurst == 1)
- pAd->CommonCfg.bEnableTxBurst = TRUE;
- else if (TxBurst == 0)
- pAd->CommonCfg.bEnableTxBurst = FALSE;
- else
- return FALSE; //Invalid argument
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_TxBurst_Proc::(TxBurst=%d)\n", pAd->CommonCfg.bEnableTxBurst));
-
- return TRUE;
-}
-
-#ifdef AGGREGATION_SUPPORT
-/*
- ==========================================================================
- Description:
- Set TxBurst
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_PktAggregate_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- LONG aggre;
-
- aggre = simple_strtol(arg, 0, 10);
-
- if (aggre == 1)
- pAd->CommonCfg.bAggregationCapable = TRUE;
- else if (aggre == 0)
- pAd->CommonCfg.bAggregationCapable = FALSE;
- else
- return FALSE; //Invalid argument
-
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_PktAggregate_Proc::(AGGRE=%d)\n", pAd->CommonCfg.bAggregationCapable));
-
- return TRUE;
-}
-#endif
-
-/*
- ==========================================================================
- Description:
- Set IEEE80211H.
- This parameter is 1 when needs radar detection, otherwise 0
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_IEEE80211H_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- LONG ieee80211h;
-
- ieee80211h = simple_strtol(arg, 0, 10);
-
- if (ieee80211h == 1)
- pAd->CommonCfg.bIEEE80211H = TRUE;
- else if (ieee80211h == 0)
- pAd->CommonCfg.bIEEE80211H = FALSE;
- else
- return FALSE; //Invalid argument
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_IEEE80211H_Proc::(IEEE80211H=%d)\n", pAd->CommonCfg.bIEEE80211H));
-
- return TRUE;
-}
-
-
-#ifdef DBG
-/*
- ==========================================================================
- Description:
- For Debug information
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Debug_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- DBGPRINT(RT_DEBUG_TRACE, ("==> Set_Debug_Proc *******************\n"));
-
- if(simple_strtol(arg, 0, 10) <= RT_DEBUG_LOUD)
- RTDebugLevel = simple_strtol(arg, 0, 10);
-
- DBGPRINT(RT_DEBUG_TRACE, ("<== Set_Debug_Proc(RTDebugLevel = %ld)\n", RTDebugLevel));
-
- return TRUE;
-}
-#endif
-
-INT Show_DescInfo_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
-#ifdef RTMP_MAC_PCI
- INT i, QueIdx=0;
-// ULONG RegValue;
- PRT28XX_RXD_STRUC pRxD;
- PTXD_STRUC pTxD;
- PRTMP_TX_RING pTxRing = &pAd->TxRing[QueIdx];
- PRTMP_MGMT_RING pMgmtRing = &pAd->MgmtRing;
- PRTMP_RX_RING pRxRing = &pAd->RxRing;
-
- for(i=0;i<TX_RING_SIZE;i++)
- {
- pTxD = (PTXD_STRUC) pTxRing->Cell[i].AllocVa;
- DBGPRINT(RT_DEBUG_OFF, ("Desc #%d\n",i));
- hex_dump("Tx Descriptor", (PUCHAR)pTxD, 16);
- DBGPRINT(RT_DEBUG_OFF, ("pTxD->DMADONE = %x\n", pTxD->DMADONE));
- }
- DBGPRINT(RT_DEBUG_OFF, ("---------------------------------------------------\n"));
- for(i=0;i<MGMT_RING_SIZE;i++)
- {
- pTxD = (PTXD_STRUC) pMgmtRing->Cell[i].AllocVa;
- DBGPRINT(RT_DEBUG_OFF, ("Desc #%d\n",i));
- hex_dump("Mgmt Descriptor", (PUCHAR)pTxD, 16);
- DBGPRINT(RT_DEBUG_OFF, ("pMgmt->DMADONE = %x\n", pTxD->DMADONE));
- }
- DBGPRINT(RT_DEBUG_OFF, ("---------------------------------------------------\n"));
- for(i=0;i<RX_RING_SIZE;i++)
- {
- pRxD = (PRT28XX_RXD_STRUC) pRxRing->Cell[i].AllocVa;
- DBGPRINT(RT_DEBUG_OFF, ("Desc #%d\n",i));
- hex_dump("Rx Descriptor", (PUCHAR)pRxD, 16);
- DBGPRINT(RT_DEBUG_OFF, ("pRxD->DDONE = %x\n", pRxD->DDONE));
- }
-#endif // RTMP_MAC_PCI //
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Reset statistics counter
-
- Arguments:
- pAdapter Pointer to our adapter
- arg
-
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_ResetStatCounter_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- //UCHAR i;
- //MAC_TABLE_ENTRY *pEntry;
-
- DBGPRINT(RT_DEBUG_TRACE, ("==>Set_ResetStatCounter_Proc\n"));
-
- // add the most up-to-date h/w raw counters into software counters
- NICUpdateRawCounters(pAd);
-
- NdisZeroMemory(&pAd->WlanCounters, sizeof(COUNTER_802_11));
- NdisZeroMemory(&pAd->Counters8023, sizeof(COUNTER_802_3));
- NdisZeroMemory(&pAd->RalinkCounters, sizeof(COUNTER_RALINK));
-
- // Reset HotSpot counter
-
-
- return TRUE;
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Add WPA key process.
- In Adhoc WPANONE, bPairwise = 0; KeyIdx = 0;
-
- Arguments:
- pAd Pointer to our adapter
- pBuf Pointer to the where the key stored
-
- Return Value:
- NDIS_SUCCESS Add key successfully
-
- IRQL = DISPATCH_LEVEL
-
- Note:
-
- ========================================================================
-*/
-
-BOOLEAN RTMPCheckStrPrintAble(
- IN CHAR *pInPutStr,
- IN UCHAR strLen)
-{
- UCHAR i=0;
-
- for (i=0; i<strLen; i++)
- {
- if ((pInPutStr[i] < 0x21) ||
- (pInPutStr[i] > 0x7E))
- return FALSE;
- }
-
- return TRUE;
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Remove WPA Key process
-
- Arguments:
- pAd Pointer to our adapter
- pBuf Pointer to the where the key stored
-
- Return Value:
- NDIS_SUCCESS Add key successfully
-
- IRQL = DISPATCH_LEVEL
-
- Note:
-
- ========================================================================
-*/
-VOID RTMPSetDesiredRates(
- IN PRTMP_ADAPTER pAdapter,
- IN LONG Rates)
-{
- NDIS_802_11_RATES aryRates;
-
- memset(&aryRates, 0x00, sizeof(NDIS_802_11_RATES));
- switch (pAdapter->CommonCfg.PhyMode)
- {
- case PHY_11A: // A only
- switch (Rates)
- {
- case 6000000: //6M
- aryRates[0] = 0x0c; // 6M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
- break;
- case 9000000: //9M
- aryRates[0] = 0x12; // 9M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
- break;
- case 12000000: //12M
- aryRates[0] = 0x18; // 12M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
- break;
- case 18000000: //18M
- aryRates[0] = 0x24; // 18M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
- break;
- case 24000000: //24M
- aryRates[0] = 0x30; // 24M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
- break;
- case 36000000: //36M
- aryRates[0] = 0x48; // 36M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
- break;
- case 48000000: //48M
- aryRates[0] = 0x60; // 48M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
- break;
- case 54000000: //54M
- aryRates[0] = 0x6c; // 54M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
- break;
- case -1: //Auto
- default:
- aryRates[0] = 0x6c; // 54Mbps
- aryRates[1] = 0x60; // 48Mbps
- aryRates[2] = 0x48; // 36Mbps
- aryRates[3] = 0x30; // 24Mbps
- aryRates[4] = 0x24; // 18M
- aryRates[5] = 0x18; // 12M
- aryRates[6] = 0x12; // 9M
- aryRates[7] = 0x0c; // 6M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
- break;
- }
- break;
- case PHY_11BG_MIXED: // B/G Mixed
- case PHY_11B: // B only
- case PHY_11ABG_MIXED: // A/B/G Mixed
- default:
- switch (Rates)
- {
- case 1000000: //1M
- aryRates[0] = 0x02;
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
- break;
- case 2000000: //2M
- aryRates[0] = 0x04;
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
- break;
- case 5000000: //5.5M
- aryRates[0] = 0x0b; // 5.5M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
- break;
- case 11000000: //11M
- aryRates[0] = 0x16; // 11M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
- break;
- case 6000000: //6M
- aryRates[0] = 0x0c; // 6M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
- break;
- case 9000000: //9M
- aryRates[0] = 0x12; // 9M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
- break;
- case 12000000: //12M
- aryRates[0] = 0x18; // 12M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
- break;
- case 18000000: //18M
- aryRates[0] = 0x24; // 18M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
- break;
- case 24000000: //24M
- aryRates[0] = 0x30; // 24M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
- break;
- case 36000000: //36M
- aryRates[0] = 0x48; // 36M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
- break;
- case 48000000: //48M
- aryRates[0] = 0x60; // 48M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
- break;
- case 54000000: //54M
- aryRates[0] = 0x6c; // 54M
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
- break;
- case -1: //Auto
- default:
- if (pAdapter->CommonCfg.PhyMode == PHY_11B)
- { //B Only
- aryRates[0] = 0x16; // 11Mbps
- aryRates[1] = 0x0b; // 5.5Mbps
- aryRates[2] = 0x04; // 2Mbps
- aryRates[3] = 0x02; // 1Mbps
- }
- else
- { //(B/G) Mixed or (A/B/G) Mixed
- aryRates[0] = 0x6c; // 54Mbps
- aryRates[1] = 0x60; // 48Mbps
- aryRates[2] = 0x48; // 36Mbps
- aryRates[3] = 0x30; // 24Mbps
- aryRates[4] = 0x16; // 11Mbps
- aryRates[5] = 0x0b; // 5.5Mbps
- aryRates[6] = 0x04; // 2Mbps
- aryRates[7] = 0x02; // 1Mbps
- }
- pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
- break;
- }
- break;
- }
-
- NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
- NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
- DBGPRINT(RT_DEBUG_TRACE, (" RTMPSetDesiredRates (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
- pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
- pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
- pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
- pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
- // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
- MlmeUpdateTxRates(pAdapter, FALSE, 0);
-}
-
-NDIS_STATUS RTMPWPARemoveKeyProc(
- IN PRTMP_ADAPTER pAd,
- IN PVOID pBuf)
-{
- PNDIS_802_11_REMOVE_KEY pKey;
- ULONG KeyIdx;
- NDIS_STATUS Status = NDIS_STATUS_FAILURE;
- BOOLEAN bTxKey; // Set the key as transmit key
- BOOLEAN bPairwise; // Indicate the key is pairwise key
- BOOLEAN bKeyRSC; // indicate the receive SC set by KeyRSC value.
- // Otherwise, it will set by the NIC.
- BOOLEAN bAuthenticator; // indicate key is set by authenticator.
- INT i;
-
- DBGPRINT(RT_DEBUG_TRACE,("---> RTMPWPARemoveKeyProc\n"));
-
- pKey = (PNDIS_802_11_REMOVE_KEY) pBuf;
- KeyIdx = pKey->KeyIndex & 0xff;
- // Bit 31 of Add-key, Tx Key
- bTxKey = (pKey->KeyIndex & 0x80000000) ? TRUE : FALSE;
- // Bit 30 of Add-key PairwiseKey
- bPairwise = (pKey->KeyIndex & 0x40000000) ? TRUE : FALSE;
- // Bit 29 of Add-key KeyRSC
- bKeyRSC = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE;
- // Bit 28 of Add-key Authenticator
- bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE;
-
- // 1. If bTx is TRUE, return failure information
- if (bTxKey == TRUE)
- return(NDIS_STATUS_INVALID_DATA);
-
- // 2. Check Pairwise Key
- if (bPairwise)
- {
- // a. If BSSID is broadcast, remove all pairwise keys.
- // b. If not broadcast, remove the pairwise specified by BSSID
- for (i = 0; i < SHARE_KEY_NUM; i++)
- {
- if (MAC_ADDR_EQUAL(pAd->SharedKey[BSS0][i].BssId, pKey->BSSID))
- {
- DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%d)\n", i));
- pAd->SharedKey[BSS0][i].KeyLen = 0;
- pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_NONE;
- AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)i);
- Status = NDIS_STATUS_SUCCESS;
- break;
- }
- }
- }
- // 3. Group Key
- else
- {
- // a. If BSSID is broadcast, remove all group keys indexed
- // b. If BSSID matched, delete the group key indexed.
- DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%ld)\n", KeyIdx));
- pAd->SharedKey[BSS0][KeyIdx].KeyLen = 0;
- pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
- AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx);
- Status = NDIS_STATUS_SUCCESS;
- }
-
- return (Status);
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Remove All WPA Keys
-
- Arguments:
- pAd Pointer to our adapter
-
- Return Value:
- None
-
- IRQL = DISPATCH_LEVEL
-
- Note:
-
- ========================================================================
-*/
-VOID RTMPWPARemoveAllKeys(
- IN PRTMP_ADAPTER pAd)
-{
-
- UCHAR i;
-
- DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveAllKeys(AuthMode=%d, WepStatus=%d)\n", pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus));
- RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
- // For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after
- // Link up. And it will be replaced if user changed it.
- if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
- return;
-
- // For WPA-None, there is no need to remove it, since WinXP won't set it again after
- // Link up. And it will be replaced if user changed it.
- if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
- return;
-
- // set BSSID wcid entry of the Pair-wise Key table as no-security mode
- AsicRemovePairwiseKeyEntry(pAd, BSS0, BSSID_WCID);
-
- // set all shared key mode as no-security.
- for (i = 0; i < SHARE_KEY_NUM; i++)
- {
- DBGPRINT(RT_DEBUG_TRACE,("remove %s key #%d\n", CipherName[pAd->SharedKey[BSS0][i].CipherAlg], i));
- NdisZeroMemory(&pAd->SharedKey[BSS0][i], sizeof(CIPHER_KEY));
-
- AsicRemoveSharedKeyEntry(pAd, BSS0, i);
- }
- RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
-}
-
-
-/*
- ========================================================================
-
- Routine Description:
- As STA's BSSID is a WC too, it uses shared key table.
- This function write correct unicast TX key to ASIC WCID.
- And we still make a copy in our MacTab.Content[BSSID_WCID].PairwiseKey.
- Caller guarantee TKIP/AES always has keyidx = 0. (pairwise key)
- Caller guarantee WEP calls this function when set Txkey, default key index=0~3.
-
- Arguments:
- pAd Pointer to our adapter
- pKey Pointer to the where the key stored
-
- Return Value:
- NDIS_SUCCESS Add key successfully
-
- IRQL = DISPATCH_LEVEL
-
- Note:
-
- ========================================================================
-*/
-/*
- ========================================================================
- Routine Description:
- Change NIC PHY mode. Re-association may be necessary. possible settings
- include - PHY_11B, PHY_11BG_MIXED, PHY_11A, and PHY_11ABG_MIXED
-
- Arguments:
- pAd - Pointer to our adapter
- phymode -
-
- IRQL = PASSIVE_LEVEL
- IRQL = DISPATCH_LEVEL
-
- ========================================================================
-*/
-VOID RTMPSetPhyMode(
- IN PRTMP_ADAPTER pAd,
- IN ULONG phymode)
-{
- INT i;
- // the selected phymode must be supported by the RF IC encoded in E2PROM
-
- // if no change, do nothing
- /* bug fix
- if (pAd->CommonCfg.PhyMode == phymode)
- return;
- */
- pAd->CommonCfg.PhyMode = (UCHAR)phymode;
-
- DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel));
-
- BuildChannelList(pAd);
-
- // sanity check user setting
- for (i = 0; i < pAd->ChannelListNum; i++)
- {
- if (pAd->CommonCfg.Channel == pAd->ChannelList[i].Channel)
- break;
- }
-
- if (i == pAd->ChannelListNum)
- {
- pAd->CommonCfg.Channel = FirstChannel(pAd);
- DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
- }
-
- NdisZeroMemory(pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES);
- NdisZeroMemory(pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
- NdisZeroMemory(pAd->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
- switch (phymode) {
- case PHY_11B:
- pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRateLen = 4;
- pAd->CommonCfg.ExtRateLen = 0;
- pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps
- //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use
- break;
-
- case PHY_11G:
- case PHY_11BG_MIXED:
- case PHY_11ABG_MIXED:
- case PHY_11N_2_4G:
- case PHY_11ABGN_MIXED:
- case PHY_11BGN_MIXED:
- case PHY_11GN_MIXED:
- pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[4] = 0x12; // 9 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[5] = 0x24; // 18 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[6] = 0x48; // 36 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRateLen = 8;
- pAd->CommonCfg.ExtRate[0] = 0x0C; // 6 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.ExtRate[1] = 0x18; // 12 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.ExtRate[2] = 0x30; // 24 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.ExtRate[3] = 0x60; // 48 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.ExtRateLen = 4;
- pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[4] = 12; // 6 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[5] = 18; // 9 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[6] = 24; // 12 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[7] = 36; // 18 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[8] = 48; // 24 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[9] = 72; // 36 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[10] = 96; // 48 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[11] = 108; // 54 mbps, in units of 0.5 Mbps
- break;
-
- case PHY_11A:
- case PHY_11AN_MIXED:
- case PHY_11AGN_MIXED:
- case PHY_11N_5G:
- pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[4] = 0xb0; // 24 mbps, in units of 0.5 Mbps, basic rate
- pAd->CommonCfg.SupRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.SupRateLen = 8;
- pAd->CommonCfg.ExtRateLen = 0;
- pAd->CommonCfg.DesireRate[0] = 12; // 6 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[1] = 18; // 9 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[2] = 24; // 12 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[3] = 36; // 18 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[4] = 48; // 24 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[5] = 72; // 36 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[6] = 96; // 48 mbps, in units of 0.5 Mbps
- pAd->CommonCfg.DesireRate[7] = 108; // 54 mbps, in units of 0.5 Mbps
- //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use
- break;
-
- default:
- break;
- }
-
-
- pAd->CommonCfg.BandState = UNKNOWN_BAND;
-}
-
-/*
- ========================================================================
- Routine Description:
- Caller ensures we has 802.11n support.
- Calls at setting HT from AP/STASetinformation
-
- Arguments:
- pAd - Pointer to our adapter
- phymode -
-
- ========================================================================
-*/
-VOID RTMPSetHT(
- IN PRTMP_ADAPTER pAd,
- IN OID_SET_HT_PHYMODE *pHTPhyMode)
-{
- //ULONG *pmcs;
- UINT32 Value = 0;
- UCHAR BBPValue = 0;
- UCHAR BBP3Value = 0;
- UCHAR RxStream = pAd->CommonCfg.RxStream;
-
- DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n",
- pHTPhyMode->HtMode, pHTPhyMode->ExtOffset,
- pHTPhyMode->MCS, pHTPhyMode->BW,
- pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
-
- // Don't zero supportedHyPhy structure.
- RTMPZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability));
- RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
- RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset));
- RTMPZeroMemory(&pAd->CommonCfg.DesiredHtPhy, sizeof(pAd->CommonCfg.DesiredHtPhy));
-
- if (pAd->CommonCfg.bRdg)
- {
- pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 1;
- pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 1;
- }
- else
- {
- pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 0;
- pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 0;
- }
-
- pAd->CommonCfg.HtCapability.HtCapParm.MaxRAmpduFactor = 3;
- pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor = 3;
-
- DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit));
-
- // Mimo power save, A-MSDU size,
- pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
- pAd->CommonCfg.DesiredHtPhy.AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize;
- pAd->CommonCfg.DesiredHtPhy.MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode;
- pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-
- pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
- pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
- pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-
- DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : AMsduSize = %d, MimoPs = %d, MpduDensity = %d, MaxRAmpduFactor = %d\n",
- pAd->CommonCfg.DesiredHtPhy.AmsduSize,
- pAd->CommonCfg.DesiredHtPhy.MimoPs,
- pAd->CommonCfg.DesiredHtPhy.MpduDensity,
- pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor));
-
- if(pHTPhyMode->HtMode == HTMODE_GF)
- {
- pAd->CommonCfg.HtCapability.HtCapInfo.GF = 1;
- pAd->CommonCfg.DesiredHtPhy.GF = 1;
- }
- else
- pAd->CommonCfg.DesiredHtPhy.GF = 0;
-
- // Decide Rx MCSSet
- switch (RxStream)
- {
- case 1:
- pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
- pAd->CommonCfg.HtCapability.MCSSet[1] = 0x00;
- break;
-
- case 2:
- pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
- pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
- break;
-
- case 3: // 3*3
- pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
- pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
- pAd->CommonCfg.HtCapability.MCSSet[2] = 0xff;
- break;
- }
-
- if (pAd->CommonCfg.bForty_Mhz_Intolerant && (pAd->CommonCfg.Channel <= 14) && (pHTPhyMode->BW == BW_40) )
- {
- pHTPhyMode->BW = BW_20;
- pAd->CommonCfg.HtCapability.HtCapInfo.Forty_Mhz_Intolerant = 1;
- }
-
- if(pHTPhyMode->BW == BW_40)
- {
- pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1; // MCS 32
- pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 1;
- if (pAd->CommonCfg.Channel <= 14)
- pAd->CommonCfg.HtCapability.HtCapInfo.CCKmodein40 = 1;
-
- pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 1;
- pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 1;
- pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = (pHTPhyMode->ExtOffset == EXTCHA_BELOW)? (EXTCHA_BELOW): EXTCHA_ABOVE;
- // Set Regsiter for extension channel position.
- RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
- RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBP3Value);
- if ((pHTPhyMode->ExtOffset == EXTCHA_BELOW))
- {
- Value |= 0x1;
- BBP3Value |= (0x20);
- RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
- }
- else if ((pHTPhyMode->ExtOffset == EXTCHA_ABOVE))
- {
- Value &= 0xfe;
- BBP3Value &= (~0x20);
- RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
- }
-
- // Turn on BBP 40MHz mode now only as AP .
- // Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection.
- if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd)
- )
- {
- RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
- BBPValue &= (~0x18);
- BBPValue |= 0x10;
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBP3Value);
- pAd->CommonCfg.BBPCurrentBW = BW_40;
- }
- }
- else
- {
- pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 0;
- pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 0;
- pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
- pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE;
- pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
- // Turn on BBP 20MHz mode by request here.
- {
- RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
- BBPValue &= (~0x18);
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
- pAd->CommonCfg.BBPCurrentBW = BW_20;
- }
- }
-
- if(pHTPhyMode->STBC == STBC_USE)
- {
- pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 1;
- pAd->CommonCfg.DesiredHtPhy.TxSTBC = 1;
- pAd->CommonCfg.HtCapability.HtCapInfo.RxSTBC = 1;
- pAd->CommonCfg.DesiredHtPhy.RxSTBC = 1;
- }
- else
- {
- pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
- pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
- }
-
- if(pHTPhyMode->SHORTGI == GI_400)
- {
- pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1;
- pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 1;
- pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 1;
- pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 1;
- }
- else
- {
- pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 0;
- pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 0;
- pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 0;
- pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 0;
- }
-
- // We support link adaptation for unsolicit MCS feedback, set to 2.
- pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE; //MCSFBK_UNSOLICIT;
- pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel;
- // 1, the extension channel above the control channel.
-
- // EDCA parameters used for AP's own transmission
- if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
- {
- pAd->CommonCfg.APEdcaParm.bValid = TRUE;
- pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
- pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
- pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
- pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
-
- pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
- pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
- pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
- pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
-
- pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6;
- pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10;
- pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
- pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
-
- pAd->CommonCfg.APEdcaParm.Txop[0] = 0;
- pAd->CommonCfg.APEdcaParm.Txop[1] = 0;
- pAd->CommonCfg.APEdcaParm.Txop[2] = 94;
- pAd->CommonCfg.APEdcaParm.Txop[3] = 47;
- }
- AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
-
- {
- RTMPSetIndividualHT(pAd, 0);
- }
-
-}
-
-/*
- ========================================================================
- Routine Description:
- Caller ensures we has 802.11n support.
- Calls at setting HT from AP/STASetinformation
-
- Arguments:
- pAd - Pointer to our adapter
- phymode -
-
- ========================================================================
-*/
-VOID RTMPSetIndividualHT(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR apidx)
-{
- PRT_HT_PHY_INFO pDesired_ht_phy = NULL;
- UCHAR TxStream = pAd->CommonCfg.TxStream;
- UCHAR DesiredMcs = MCS_AUTO;
-
- do
- {
- {
- pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
- DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS;
- //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
- break;
- }
- } while (FALSE);
-
- if (pDesired_ht_phy == NULL)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetIndividualHT: invalid apidx(%d)\n", apidx));
- return;
- }
- RTMPZeroMemory(pDesired_ht_phy, sizeof(RT_HT_PHY_INFO));
-
- DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetIndividualHT : Desired MCS = %d\n", DesiredMcs));
- // Check the validity of MCS
- if ((TxStream == 1) && ((DesiredMcs >= MCS_8) && (DesiredMcs <= MCS_15)))
- {
- DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS(%d) is invalid in 1S, reset it as MCS_7\n", DesiredMcs));
- DesiredMcs = MCS_7;
- }
-
- if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_20) && (DesiredMcs == MCS_32))
- {
- DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS_32 is only supported in 40-MHz, reset it as MCS_0\n"));
- DesiredMcs = MCS_0;
- }
-
- pDesired_ht_phy->bHtEnable = TRUE;
-
- // Decide desired Tx MCS
- switch (TxStream)
- {
- case 1:
- if (DesiredMcs == MCS_AUTO)
- {
- pDesired_ht_phy->MCSSet[0]= 0xff;
- pDesired_ht_phy->MCSSet[1]= 0x00;
- }
- else if (DesiredMcs <= MCS_7)
- {
- pDesired_ht_phy->MCSSet[0]= 1<<DesiredMcs;
- pDesired_ht_phy->MCSSet[1]= 0x00;
- }
- break;
-
- case 2:
- if (DesiredMcs == MCS_AUTO)
- {
- pDesired_ht_phy->MCSSet[0]= 0xff;
- pDesired_ht_phy->MCSSet[1]= 0xff;
- }
- else if (DesiredMcs <= MCS_15)
- {
- ULONG mode;
-
- mode = DesiredMcs / 8;
- if (mode < 2)
- pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
- }
- break;
-
- case 3: // 3*3
- if (DesiredMcs == MCS_AUTO)
- {
- /* MCS0 ~ MCS23, 3 bytes */
- pDesired_ht_phy->MCSSet[0]= 0xff;
- pDesired_ht_phy->MCSSet[1]= 0xff;
- pDesired_ht_phy->MCSSet[2]= 0xff;
- }
- else if (DesiredMcs <= MCS_23)
- {
- ULONG mode;
-
- mode = DesiredMcs / 8;
- if (mode < 3)
- pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
- }
- break;
- }
-
- if(pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_40)
- {
- if (DesiredMcs == MCS_AUTO || DesiredMcs == MCS_32)
- pDesired_ht_phy->MCSSet[4] = 0x1;
- }
-
- // update HT Rate setting
- if (pAd->OpMode == OPMODE_STA)
- MlmeUpdateHtTxRates(pAd, BSS0);
- else
- MlmeUpdateHtTxRates(pAd, apidx);
-}
-
-
-/*
- ========================================================================
- Routine Description:
- Update HT IE from our capability.
-
- Arguments:
- Send all HT IE in beacon/probe rsp/assoc rsp/action frame.
-
-
- ========================================================================
-*/
-VOID RTMPUpdateHTIE(
- IN RT_HT_CAPABILITY *pRtHt,
- IN UCHAR *pMcsSet,
- OUT HT_CAPABILITY_IE *pHtCapability,
- OUT ADD_HT_INFO_IE *pAddHtInfo)
-{
- RTMPZeroMemory(pHtCapability, sizeof(HT_CAPABILITY_IE));
- RTMPZeroMemory(pAddHtInfo, sizeof(ADD_HT_INFO_IE));
-
- pHtCapability->HtCapInfo.ChannelWidth = pRtHt->ChannelWidth;
- pHtCapability->HtCapInfo.MimoPs = pRtHt->MimoPs;
- pHtCapability->HtCapInfo.GF = pRtHt->GF;
- pHtCapability->HtCapInfo.ShortGIfor20 = pRtHt->ShortGIfor20;
- pHtCapability->HtCapInfo.ShortGIfor40 = pRtHt->ShortGIfor40;
- pHtCapability->HtCapInfo.TxSTBC = pRtHt->TxSTBC;
- pHtCapability->HtCapInfo.RxSTBC = pRtHt->RxSTBC;
- pHtCapability->HtCapInfo.AMsduSize = pRtHt->AmsduSize;
- pHtCapability->HtCapParm.MaxRAmpduFactor = pRtHt->MaxRAmpduFactor;
- pHtCapability->HtCapParm.MpduDensity = pRtHt->MpduDensity;
-
- pAddHtInfo->AddHtInfo.ExtChanOffset = pRtHt->ExtChanOffset ;
- pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth;
- pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode;
- pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent;
- RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet*/pMcsSet, 4); // rt2860 only support MCS max=32, no need to copy all 16 uchar.
-
- DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n"));
-}
-
-/*
- ========================================================================
- Description:
- Add Client security information into ASIC WCID table and IVEIV table.
- Return:
- ========================================================================
-*/
-VOID RTMPAddWcidAttributeEntry(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BssIdx,
- IN UCHAR KeyIdx,
- IN UCHAR CipherAlg,
- IN MAC_TABLE_ENTRY *pEntry)
-{
- UINT32 WCIDAttri = 0;
- USHORT offset;
- UCHAR IVEIV = 0;
- USHORT Wcid = 0;
-
- {
- {
- if (BssIdx > BSS0)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("RTMPAddWcidAttributeEntry: The BSS-index(%d) is out of range for Infra link. \n", BssIdx));
- return;
- }
-
- // 1. In ADHOC mode, the AID is wcid number. And NO mesh link exists.
- // 2. In Infra mode, the AID:1 MUST be wcid of infra STA.
- // the AID:2~ assign to mesh link entry.
- if (pEntry)
- Wcid = pEntry->Aid;
- else
- Wcid = MCAST_WCID;
- }
- }
-
- // Update WCID attribute table
- offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
-
- {
- if (pEntry && pEntry->ValidAsMesh)
- WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
- else
- WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE;
- }
-
- RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
-
-
- // Update IV/EIV table
- offset = MAC_IVEIV_TABLE_BASE + (Wcid * HW_IVEIV_ENTRY_SIZE);
-
- // WPA mode
- if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) || (CipherAlg == CIPHER_AES))
- {
- // Eiv bit on. keyid always is 0 for pairwise key
- IVEIV = (KeyIdx <<6) | 0x20;
- }
- else
- {
- // WEP KeyIdx is default tx key.
- IVEIV = (KeyIdx << 6);
- }
-
- // For key index and ext IV bit, so only need to update the position(offset+3).
-#ifdef RTMP_MAC_PCI
- RTMP_IO_WRITE8(pAd, offset+3, IVEIV);
-#endif // RTMP_MAC_PCI //
-#ifdef RTMP_MAC_USB
- RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV);
-#endif // RTMP_MAC_USB //
-
- DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg]));
- DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri));
-
-}
-
-/*
- ==========================================================================
- Description:
- Parse encryption type
-Arguments:
- pAdapter Pointer to our adapter
- wrq Pointer to the ioctl argument
-
- Return Value:
- None
-
- Note:
- ==========================================================================
-*/
-PSTRING GetEncryptType(CHAR enc)
-{
- if(enc == Ndis802_11WEPDisabled)
- return "NONE";
- if(enc == Ndis802_11WEPEnabled)
- return "WEP";
- if(enc == Ndis802_11Encryption2Enabled)
- return "TKIP";
- if(enc == Ndis802_11Encryption3Enabled)
- return "AES";
- if(enc == Ndis802_11Encryption4Enabled)
- return "TKIPAES";
- else
- return "UNKNOW";
-}
-
-PSTRING GetAuthMode(CHAR auth)
-{
- if(auth == Ndis802_11AuthModeOpen)
- return "OPEN";
- if(auth == Ndis802_11AuthModeShared)
- return "SHARED";
- if(auth == Ndis802_11AuthModeAutoSwitch)
- return "AUTOWEP";
- if(auth == Ndis802_11AuthModeWPA)
- return "WPA";
- if(auth == Ndis802_11AuthModeWPAPSK)
- return "WPAPSK";
- if(auth == Ndis802_11AuthModeWPANone)
- return "WPANONE";
- if(auth == Ndis802_11AuthModeWPA2)
- return "WPA2";
- if(auth == Ndis802_11AuthModeWPA2PSK)
- return "WPA2PSK";
- if(auth == Ndis802_11AuthModeWPA1WPA2)
- return "WPA1WPA2";
- if(auth == Ndis802_11AuthModeWPA1PSKWPA2PSK)
- return "WPA1PSKWPA2PSK";
-
- return "UNKNOW";
-}
-
-/*
- ==========================================================================
- Description:
- Get site survey results
- Arguments:
- pAdapter Pointer to our adapter
- wrq Pointer to the ioctl argument
-
- Return Value:
- None
-
- Note:
- Usage:
- 1.) UI needs to wait 4 seconds after issue a site survey command
- 2.) iwpriv ra0 get_site_survey
- 3.) UI needs to prepare at least 4096bytes to get the results
- ==========================================================================
-*/
-#define LINE_LEN (4+33+20+23+9+7+7+3) // Channel+SSID+Bssid+Security+Signal+WiressMode+ExtCh+NetworkType
-VOID RTMPCommSiteSurveyData(
- IN PSTRING msg,
- IN PBSS_ENTRY pBss)
-{
- INT Rssi = 0;
- UINT Rssi_Quality = 0;
- NDIS_802_11_NETWORK_TYPE wireless_mode;
- CHAR Ssid[MAX_LEN_OF_SSID +1];
- STRING SecurityStr[32] = {0};
- NDIS_802_11_ENCRYPTION_STATUS ap_cipher = Ndis802_11EncryptionDisabled;
- NDIS_802_11_AUTHENTICATION_MODE ap_auth_mode = Ndis802_11AuthModeOpen;
-
- memset(Ssid, 0 ,(MAX_LEN_OF_SSID +1));
-
- //Channel
- sprintf(msg+strlen(msg),"%-4d", pBss->Channel);
- //SSID
- memcpy(Ssid, pBss->Ssid, pBss->SsidLen);
- Ssid[pBss->SsidLen] = '\0';
- sprintf(msg+strlen(msg),"%-33s", Ssid);
- //BSSID
- sprintf(msg+strlen(msg),"%02x:%02x:%02x:%02x:%02x:%02x ",
- pBss->Bssid[0],
- pBss->Bssid[1],
- pBss->Bssid[2],
- pBss->Bssid[3],
- pBss->Bssid[4],
- pBss->Bssid[5]);
-
- //Security
- if ((Ndis802_11AuthModeWPA <= pBss->AuthMode) &&
- (pBss->AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
- {
- if (pBss->AuthModeAux == Ndis802_11AuthModeWPANone)
- {
- ap_auth_mode = pBss->AuthMode;
- if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
- ap_cipher = pBss->WPA.PairCipher;
- else
- ap_cipher = Ndis802_11Encryption4Enabled;
- }
- else if (pBss->AuthModeAux == Ndis802_11AuthModeOpen)
- {
- ap_auth_mode = pBss->AuthMode;
- if ((ap_auth_mode == Ndis802_11AuthModeWPA) ||
- (ap_auth_mode == Ndis802_11AuthModeWPAPSK))
- {
- if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
- ap_cipher = pBss->WPA.PairCipher;
- else
- ap_cipher = Ndis802_11Encryption4Enabled;
- }
- else if ((ap_auth_mode == Ndis802_11AuthModeWPA2) ||
- (ap_auth_mode == Ndis802_11AuthModeWPA2PSK))
- {
- if (pBss->WPA2.PairCipherAux == Ndis802_11WEPDisabled)
- ap_cipher = pBss->WPA2.PairCipher;
- else
- ap_cipher = Ndis802_11Encryption4Enabled;
- }
- }
- else if ((pBss->AuthMode == Ndis802_11AuthModeWPAPSK) ||
- (pBss->AuthMode == Ndis802_11AuthModeWPA2PSK))
- {
- if ((pBss->AuthModeAux == Ndis802_11AuthModeWPAPSK) ||
- (pBss->AuthModeAux == Ndis802_11AuthModeWPA2PSK))
- ap_auth_mode = Ndis802_11AuthModeWPA1PSKWPA2PSK;
- else
- ap_auth_mode = pBss->AuthMode;
-
- if (pBss->WPA.PairCipher != pBss->WPA2.PairCipher)
- ap_cipher = Ndis802_11Encryption4Enabled;
- else if ((pBss->WPA.PairCipher == pBss->WPA2.PairCipher) &&
- (pBss->WPA.PairCipherAux != pBss->WPA2.PairCipherAux))
- ap_cipher = Ndis802_11Encryption4Enabled;
- else if ((pBss->WPA.PairCipher == pBss->WPA2.PairCipher) &&
- (pBss->WPA.PairCipherAux == pBss->WPA2.PairCipherAux) &&
- (pBss->WPA.PairCipherAux != Ndis802_11WEPDisabled))
- ap_cipher = Ndis802_11Encryption4Enabled;
- else if ((pBss->WPA.PairCipher == pBss->WPA2.PairCipher) &&
- (pBss->WPA.PairCipherAux == pBss->WPA2.PairCipherAux) &&
- (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled))
- ap_cipher = pBss->WPA.PairCipher;
- }
- else if ((pBss->AuthMode == Ndis802_11AuthModeWPA) ||
- (pBss->AuthMode == Ndis802_11AuthModeWPA2))
- {
- if ((pBss->AuthModeAux == Ndis802_11AuthModeWPA) ||
- (pBss->AuthMode == Ndis802_11AuthModeWPA2))
- ap_auth_mode = Ndis802_11AuthModeWPA1WPA2;
- else
- ap_auth_mode = pBss->AuthMode;
-
- if (pBss->WPA.PairCipher != pBss->WPA2.PairCipher)
- ap_cipher = Ndis802_11Encryption4Enabled;
- else if ((pBss->WPA.PairCipher == pBss->WPA2.PairCipher) &&
- (pBss->WPA.PairCipherAux != pBss->WPA2.PairCipherAux))
- ap_cipher = Ndis802_11Encryption4Enabled;
- else if ((pBss->WPA.PairCipher == pBss->WPA2.PairCipher) &&
- (pBss->WPA.PairCipherAux == pBss->WPA2.PairCipherAux) &&
- (pBss->WPA.PairCipherAux != Ndis802_11WEPDisabled))
- ap_cipher = Ndis802_11Encryption4Enabled;
- else if ((pBss->WPA.PairCipher == pBss->WPA2.PairCipher) &&
- (pBss->WPA.PairCipherAux == pBss->WPA2.PairCipherAux) &&
- (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled))
- ap_cipher = pBss->WPA.PairCipher;
- }
-
- sprintf(SecurityStr, "%s/%s", GetAuthMode((CHAR)ap_auth_mode), GetEncryptType((CHAR)ap_cipher));
- }
- else
- {
- ap_auth_mode = pBss->AuthMode;
- ap_cipher = pBss->WepStatus;
- if (ap_cipher == Ndis802_11WEPDisabled)
- sprintf(SecurityStr, "NONE");
- else if (ap_cipher == Ndis802_11WEPEnabled)
- sprintf(SecurityStr, "WEP");
- else
- sprintf(SecurityStr, "%s/%s", GetAuthMode((CHAR)ap_auth_mode), GetEncryptType((CHAR)ap_cipher));
- }
-
- sprintf(msg+strlen(msg), "%-23s", SecurityStr);
-
- // Rssi
- Rssi = (INT)pBss->Rssi;
- if (Rssi >= -50)
- Rssi_Quality = 100;
- else if (Rssi >= -80) // between -50 ~ -80dbm
- Rssi_Quality = (UINT)(24 + ((Rssi + 80) * 26)/10);
- else if (Rssi >= -90) // between -80 ~ -90dbm
- Rssi_Quality = (UINT)(((Rssi + 90) * 26)/10);
- else // < -84 dbm
- Rssi_Quality = 0;
- sprintf(msg+strlen(msg),"%-9d", Rssi_Quality);
- // Wireless Mode
- wireless_mode = NetworkTypeInUseSanity(pBss);
- if (wireless_mode == Ndis802_11FH ||
- wireless_mode == Ndis802_11DS)
- sprintf(msg+strlen(msg),"%-7s", "11b");
- else if (wireless_mode == Ndis802_11OFDM5)
- sprintf(msg+strlen(msg),"%-7s", "11a");
- else if (wireless_mode == Ndis802_11OFDM5_N)
- sprintf(msg+strlen(msg),"%-7s", "11a/n");
- else if (wireless_mode == Ndis802_11OFDM24)
- sprintf(msg+strlen(msg),"%-7s", "11b/g");
- else if (wireless_mode == Ndis802_11OFDM24_N)
- sprintf(msg+strlen(msg),"%-7s", "11b/g/n");
- else
- sprintf(msg+strlen(msg),"%-7s", "unknow");
-
- // Ext Channel
- if (pBss->AddHtInfoLen > 0)
- {
- if (pBss->AddHtInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE)
- sprintf(msg+strlen(msg),"%-7s", " ABOVE");
- else if (pBss->AddHtInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW)
- sprintf(msg+strlen(msg),"%-7s", " BELOW");
- else
- sprintf(msg+strlen(msg),"%-7s", " NONE");
- }
- else
- {
- sprintf(msg+strlen(msg),"%-7s", " NONE");
- }
-
- //Network Type
- if (pBss->BssType == BSS_ADHOC)
- sprintf(msg+strlen(msg),"%-3s", " Ad");
- else
- sprintf(msg+strlen(msg),"%-3s", " In");
-
- sprintf(msg+strlen(msg),"\n");
-
- return;
-}
-
-#define MAC_LINE_LEN (14+4+4+10+10+10+6+6) // Addr+aid+psm+datatime+rxbyte+txbyte+current tx rate+last tx rate
-VOID RTMPIoctlGetMacTable(
- IN PRTMP_ADAPTER pAd,
- IN struct iwreq *wrq)
-{
- INT i;
- RT_802_11_MAC_TABLE MacTab;
- char *msg;
-
- MacTab.Num = 0;
- for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
- {
- if (pAd->MacTab.Content[i].ValidAsCLI && (pAd->MacTab.Content[i].Sst == SST_ASSOC))
- {
- COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr);
- MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid;
- MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode;
- MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode;
-
- // Fill in RSSI per entry
- MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0;
- MacTab.Entry[MacTab.Num].AvgRssi1 = pAd->MacTab.Content[i].RssiSample.AvgRssi1;
- MacTab.Entry[MacTab.Num].AvgRssi2 = pAd->MacTab.Content[i].RssiSample.AvgRssi2;
-
- // the connected time per entry
- MacTab.Entry[MacTab.Num].ConnectedTime = pAd->MacTab.Content[i].StaConnectTime;
- MacTab.Entry[MacTab.Num].TxRate.field.MCS = pAd->MacTab.Content[i].HTPhyMode.field.MCS;
- MacTab.Entry[MacTab.Num].TxRate.field.BW = pAd->MacTab.Content[i].HTPhyMode.field.BW;
- MacTab.Entry[MacTab.Num].TxRate.field.ShortGI = pAd->MacTab.Content[i].HTPhyMode.field.ShortGI;
- MacTab.Entry[MacTab.Num].TxRate.field.STBC = pAd->MacTab.Content[i].HTPhyMode.field.STBC;
- MacTab.Entry[MacTab.Num].TxRate.field.rsv = pAd->MacTab.Content[i].HTPhyMode.field.rsv;
- MacTab.Entry[MacTab.Num].TxRate.field.MODE = pAd->MacTab.Content[i].HTPhyMode.field.MODE;
- MacTab.Entry[MacTab.Num].TxRate.word = pAd->MacTab.Content[i].HTPhyMode.word;
-
- MacTab.Num += 1;
- }
- }
- wrq->u.data.length = sizeof(RT_802_11_MAC_TABLE);
- if (copy_to_user(wrq->u.data.pointer, &MacTab, wrq->u.data.length))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__));
- }
-
- msg = kmalloc(sizeof(CHAR)*(MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN), MEM_ALLOC_FLAG);
- if (msg == NULL)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("%s():Alloc memory failed\n", __func__));
- return;
- }
- memset(msg, 0 ,MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN );
- sprintf(msg,"%s","\n");
- sprintf(msg+strlen(msg),"%-14s%-4s%-4s%-10s%-10s%-10s%-6s%-6s\n",
- "MAC", "AID", "PSM", "LDT", "RxB", "TxB","CTxR", "LTxR");
-
- for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
- {
- PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
- if (pEntry->ValidAsCLI && (pEntry->Sst == SST_ASSOC))
- {
- if((strlen(msg)+MAC_LINE_LEN ) >= (MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN) )
- break;
- sprintf(msg+strlen(msg),"%02x%02x%02x%02x%02x%02x ",
- pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
- pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
- sprintf(msg+strlen(msg),"%-4d", (int)pEntry->Aid);
- sprintf(msg+strlen(msg),"%-4d", (int)pEntry->PsMode);
- sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.LastDataPacketTime*/); // ToDo
- sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalRxByteCount*/); // ToDo
- sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalTxByteCount*/); // ToDo
- sprintf(msg+strlen(msg),"%-6d",RateIdToMbps[pAd->MacTab.Content[i].CurrTxRate]);
- sprintf(msg+strlen(msg),"%-6d\n",0/*RateIdToMbps[pAd->MacTab.Content[i].LastTxRate]*/); // ToDo
- }
- }
- // for compatible with old API just do the printk to console
- //wrq->u.data.length = strlen(msg);
- //if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("%s", msg));
- }
-
- kfree(msg);
-}
-
-
-INT Set_BASetup_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- UCHAR mac[6], tid;
- PSTRING token;
- STRING sepValue[] = ":", DASH = '-';
- INT i;
- MAC_TABLE_ENTRY *pEntry;
-
-/*
- The BASetup inupt string format should be xx:xx:xx:xx:xx:xx-d,
- =>The six 2 digit hex-decimal number previous are the Mac address,
- =>The seventh decimal number is the tid value.
-*/
- //DBGPRINT(RT_DEBUG_TRACE,("\n%s\n", arg));
-
- if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
- return FALSE;
-
- token = strchr(arg, DASH);
- if ((token != NULL) && (strlen(token)>1))
- {
- tid = (UCHAR) simple_strtol((token+1), 0, 10);
- if (tid > 15)
- return FALSE;
-
- *token = '\0';
- for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
- {
- if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
- return FALSE;
- AtoH(token, (&mac[i]), 1);
- }
- if(i != 6)
- return FALSE;
-
- DBGPRINT(RT_DEBUG_OFF, ("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x\n",
- mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], tid));
-
- pEntry = MacTableLookup(pAd, (PUCHAR) mac);
-
- if (pEntry) {
- DBGPRINT(RT_DEBUG_OFF, ("\nSetup BA Session: Tid = %d\n", tid));
- BAOriSessionSetUp(pAd, pEntry, tid, 0, 100, TRUE);
- }
-
- return TRUE;
- }
-
- return FALSE;
-
-}
-
-INT Set_BADecline_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG bBADecline;
-
- bBADecline = simple_strtol(arg, 0, 10);
-
- if (bBADecline == 0)
- {
- pAd->CommonCfg.bBADecline = FALSE;
- }
- else if (bBADecline == 1)
- {
- pAd->CommonCfg.bBADecline = TRUE;
- }
- else
- {
- return FALSE; //Invalid argument
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_BADecline_Proc::(BADecline=%d)\n", pAd->CommonCfg.bBADecline));
-
- return TRUE;
-}
-
-INT Set_BAOriTearDown_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- UCHAR mac[6], tid;
- PSTRING token;
- STRING sepValue[] = ":", DASH = '-';
- INT i;
- MAC_TABLE_ENTRY *pEntry;
-
- //DBGPRINT(RT_DEBUG_TRACE,("\n%s\n", arg));
-/*
- The BAOriTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
- =>The six 2 digit hex-decimal number previous are the Mac address,
- =>The seventh decimal number is the tid value.
-*/
- if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
- return FALSE;
-
- token = strchr(arg, DASH);
- if ((token != NULL) && (strlen(token)>1))
- {
- tid = simple_strtol((token+1), 0, 10);
- if (tid > NUM_OF_TID)
- return FALSE;
-
- *token = '\0';
- for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
- {
- if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
- return FALSE;
- AtoH(token, (&mac[i]), 1);
- }
- if(i != 6)
- return FALSE;
-
- DBGPRINT(RT_DEBUG_OFF, ("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x",
- mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], tid));
-
- pEntry = MacTableLookup(pAd, (PUCHAR) mac);
-
- if (pEntry) {
- DBGPRINT(RT_DEBUG_OFF, ("\nTear down Ori BA Session: Tid = %d\n", tid));
- BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, TRUE);
- }
-
- return TRUE;
- }
-
- return FALSE;
-
-}
-
-INT Set_BARecTearDown_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- UCHAR mac[6], tid;
- PSTRING token;
- STRING sepValue[] = ":", DASH = '-';
- INT i;
- MAC_TABLE_ENTRY *pEntry;
-
- //DBGPRINT(RT_DEBUG_TRACE,("\n%s\n", arg));
-/*
- The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
- =>The six 2 digit hex-decimal number previous are the Mac address,
- =>The seventh decimal number is the tid value.
-*/
- if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
- return FALSE;
-
- token = strchr(arg, DASH);
- if ((token != NULL) && (strlen(token)>1))
- {
- tid = simple_strtol((token+1), 0, 10);
- if (tid > NUM_OF_TID)
- return FALSE;
-
- *token = '\0';
- for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
- {
- if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
- return FALSE;
- AtoH(token, (&mac[i]), 1);
- }
- if(i != 6)
- return FALSE;
-
- DBGPRINT(RT_DEBUG_OFF, ("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x",
- mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], tid));
-
- pEntry = MacTableLookup(pAd, (PUCHAR) mac);
-
- if (pEntry) {
- DBGPRINT(RT_DEBUG_OFF, ("\nTear down Rec BA Session: Tid = %d\n", tid));
- BARecSessionTearDown(pAd, pEntry->Aid, tid, FALSE);
- }
-
- return TRUE;
- }
-
- return FALSE;
-
-}
-
-INT Set_HtBw_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG HtBw;
-
- HtBw = simple_strtol(arg, 0, 10);
- if (HtBw == BW_40)
- pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
- else if (HtBw == BW_20)
- pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
- else
- return FALSE; //Invalid argument
-
- SetCommonHT(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBw_Proc::(HtBw=%d)\n", pAd->CommonCfg.RegTransmitSetting.field.BW));
-
- return TRUE;
-}
-
-INT Set_HtMcs_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG HtMcs, Mcs_tmp;
- BOOLEAN bAutoRate = FALSE;
-
- Mcs_tmp = simple_strtol(arg, 0, 10);
-
- if (Mcs_tmp <= 15 || Mcs_tmp == 32)
- HtMcs = Mcs_tmp;
- else
- HtMcs = MCS_AUTO;
-
- {
- pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs;
- pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(HtMcs=%d, bAutoTxRateSwitch = %d)\n",
- pAd->StaCfg.DesiredTransmitSetting.field.MCS, pAd->StaCfg.bAutoTxRateSwitch));
-
- if ((pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED) ||
- (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE < MODE_HTMIX))
- {
- if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) &&
- (HtMcs >= 0 && HtMcs <= 3) &&
- (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_CCK))
- {
- RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs] * 1000000));
- }
- else if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) &&
- (HtMcs >= 0 && HtMcs <= 7) &&
- (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_OFDM))
- {
- RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs+4] * 1000000));
- }
- else
- bAutoRate = TRUE;
-
- if (bAutoRate)
- {
- pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
- RTMPSetDesiredRates(pAd, -1);
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(FixedTxMode=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode));
- }
- if (ADHOC_ON(pAd))
- return TRUE;
- }
-
- SetCommonHT(pAd);
-
- return TRUE;
-}
-
-INT Set_HtGi_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG HtGi;
-
- HtGi = simple_strtol(arg, 0, 10);
-
- if ( HtGi == GI_400)
- pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400;
- else if ( HtGi == GI_800 )
- pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800;
- else
- return FALSE; //Invalid argument
-
- SetCommonHT(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtGi_Proc::(ShortGI=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.ShortGI));
-
- return TRUE;
-}
-
-
-INT Set_HtTxBASize_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- UCHAR Size;
-
- Size = simple_strtol(arg, 0, 10);
-
- if (Size <=0 || Size >=64)
- {
- Size = 8;
- }
- pAd->CommonCfg.TxBASize = Size-1;
- DBGPRINT(RT_DEBUG_ERROR, ("Set_HtTxBASize ::(TxBASize= %d)\n", Size));
-
- return TRUE;
-}
-
-INT Set_HtDisallowTKIP_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
-
- if (Value == 1)
- {
- pAd->CommonCfg.HT_DisallowTKIP = TRUE;
- }
- else
- {
- pAd->CommonCfg.HT_DisallowTKIP = FALSE;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtDisallowTKIP_Proc ::%s\n",
- (pAd->CommonCfg.HT_DisallowTKIP == TRUE) ? "enabled" : "disabled"));
-
- return TRUE;
-}
-
-INT Set_HtOpMode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
-
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
-
- if (Value == HTMODE_GF)
- pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_GF;
- else if ( Value == HTMODE_MM )
- pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_MM;
- else
- return FALSE; //Invalid argument
-
- SetCommonHT(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtOpMode_Proc::(HtOpMode=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.HTMODE));
-
- return TRUE;
-
-}
-
-INT Set_HtStbc_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
-
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
-
- if (Value == STBC_USE)
- pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE;
- else if ( Value == STBC_NONE )
- pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE;
- else
- return FALSE; //Invalid argument
-
- SetCommonHT(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Stbc_Proc::(HtStbc=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.STBC));
-
- return TRUE;
-}
-
-INT Set_HtHtc_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
-
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
- if (Value == 0)
- pAd->HTCEnable = FALSE;
- else if ( Value ==1 )
- pAd->HTCEnable = TRUE;
- else
- return FALSE; //Invalid argument
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtHtc_Proc::(HtHtc=%d)\n",pAd->HTCEnable));
-
- return TRUE;
-}
-
-INT Set_HtExtcha_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
-
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
-
- if (Value == 0)
- pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
- else if ( Value ==1 )
- pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
- else
- return FALSE; //Invalid argument
-
- SetCommonHT(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtExtcha_Proc::(HtExtcha=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.EXTCHA));
-
- return TRUE;
-}
-
-INT Set_HtMpduDensity_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
-
- if (Value <=7 && Value >= 0)
- pAd->CommonCfg.BACapability.field.MpduDensity = Value;
- else
- pAd->CommonCfg.BACapability.field.MpduDensity = 4;
-
- SetCommonHT(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMpduDensity_Proc::(HtMpduDensity=%d)\n",pAd->CommonCfg.BACapability.field.MpduDensity));
-
- return TRUE;
-}
-
-INT Set_HtBaWinSize_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
-
-
- if (Value >=1 && Value <= 64)
- {
- pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value;
- pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value;
- }
- else
- {
- pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64;
- pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;
- }
-
- SetCommonHT(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBaWinSize_Proc::(HtBaWinSize=%d)\n",pAd->CommonCfg.BACapability.field.RxBAWinLimit));
-
- return TRUE;
-}
-
-INT Set_HtRdg_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
-
- if (Value == 0)
- pAd->CommonCfg.bRdg = FALSE;
- else if ( Value ==1 )
- {
- pAd->HTCEnable = TRUE;
- pAd->CommonCfg.bRdg = TRUE;
- }
- else
- return FALSE; //Invalid argument
-
- SetCommonHT(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtRdg_Proc::(HtRdg=%d)\n",pAd->CommonCfg.bRdg));
-
- return TRUE;
-}
-
-INT Set_HtLinkAdapt_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
- if (Value == 0)
- pAd->bLinkAdapt = FALSE;
- else if ( Value ==1 )
- {
- pAd->HTCEnable = TRUE;
- pAd->bLinkAdapt = TRUE;
- }
- else
- return FALSE; //Invalid argument
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtLinkAdapt_Proc::(HtLinkAdapt=%d)\n",pAd->bLinkAdapt));
-
- return TRUE;
-}
-
-INT Set_HtAmsdu_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
- if (Value == 0)
- pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE;
- else if ( Value == 1 )
- pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE;
- else
- return FALSE; //Invalid argument
-
- SetCommonHT(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAmsdu_Proc::(HtAmsdu=%d)\n",pAd->CommonCfg.BACapability.field.AmsduEnable));
-
- return TRUE;
-}
-
-INT Set_HtAutoBa_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
- pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
- }
- else if (Value == 1)
- {
- pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
- pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
- }
- else
- return FALSE; //Invalid argument
-
- pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
- pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
+ Routine Description:
+ Remove WPA Key process
- SetCommonHT(pAd);
+ Arguments:
+ pAd Pointer to our adapter
+ pBuf Pointer to the where the key stored
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA));
+ Return Value:
+ NDIS_SUCCESS Add key successfully
- return TRUE;
+ IRQL = DISPATCH_LEVEL
-}
+ Note:
-INT Set_HtProtect_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
+ ========================================================================
+*/
+VOID RTMPSetDesiredRates(
+ IN PRTMP_ADAPTER pAdapter,
+ IN LONG Rates)
{
- ULONG Value;
-
- Value = simple_strtol(arg, 0, 10);
- if (Value == 0)
- pAd->CommonCfg.bHTProtect = FALSE;
- else if (Value == 1)
- pAd->CommonCfg.bHTProtect = TRUE;
- else
- return FALSE; //Invalid argument
+ NDIS_802_11_RATES aryRates;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtProtect_Proc::(HtProtect=%d)\n",pAd->CommonCfg.bHTProtect));
+ memset(&aryRates, 0x00, sizeof(NDIS_802_11_RATES));
+ switch (pAdapter->CommonCfg.PhyMode)
+ {
+ case PHY_11A: // A only
+ switch (Rates)
+ {
+ case 6000000: //6M
+ aryRates[0] = 0x0c; // 6M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
+ break;
+ case 9000000: //9M
+ aryRates[0] = 0x12; // 9M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
+ break;
+ case 12000000: //12M
+ aryRates[0] = 0x18; // 12M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
+ break;
+ case 18000000: //18M
+ aryRates[0] = 0x24; // 18M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
+ break;
+ case 24000000: //24M
+ aryRates[0] = 0x30; // 24M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
+ break;
+ case 36000000: //36M
+ aryRates[0] = 0x48; // 36M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
+ break;
+ case 48000000: //48M
+ aryRates[0] = 0x60; // 48M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
+ break;
+ case 54000000: //54M
+ aryRates[0] = 0x6c; // 54M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
+ break;
+ case -1: //Auto
+ default:
+ aryRates[0] = 0x6c; // 54Mbps
+ aryRates[1] = 0x60; // 48Mbps
+ aryRates[2] = 0x48; // 36Mbps
+ aryRates[3] = 0x30; // 24Mbps
+ aryRates[4] = 0x24; // 18M
+ aryRates[5] = 0x18; // 12M
+ aryRates[6] = 0x12; // 9M
+ aryRates[7] = 0x0c; // 6M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
+ break;
+ }
+ break;
+ case PHY_11BG_MIXED: // B/G Mixed
+ case PHY_11B: // B only
+ case PHY_11ABG_MIXED: // A/B/G Mixed
+ default:
+ switch (Rates)
+ {
+ case 1000000: //1M
+ aryRates[0] = 0x02;
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
+ break;
+ case 2000000: //2M
+ aryRates[0] = 0x04;
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
+ break;
+ case 5000000: //5.5M
+ aryRates[0] = 0x0b; // 5.5M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
+ break;
+ case 11000000: //11M
+ aryRates[0] = 0x16; // 11M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
+ break;
+ case 6000000: //6M
+ aryRates[0] = 0x0c; // 6M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
+ break;
+ case 9000000: //9M
+ aryRates[0] = 0x12; // 9M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
+ break;
+ case 12000000: //12M
+ aryRates[0] = 0x18; // 12M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
+ break;
+ case 18000000: //18M
+ aryRates[0] = 0x24; // 18M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
+ break;
+ case 24000000: //24M
+ aryRates[0] = 0x30; // 24M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
+ break;
+ case 36000000: //36M
+ aryRates[0] = 0x48; // 36M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
+ break;
+ case 48000000: //48M
+ aryRates[0] = 0x60; // 48M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
+ break;
+ case 54000000: //54M
+ aryRates[0] = 0x6c; // 54M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
+ break;
+ case -1: //Auto
+ default:
+ if (pAdapter->CommonCfg.PhyMode == PHY_11B)
+ { //B Only
+ aryRates[0] = 0x16; // 11Mbps
+ aryRates[1] = 0x0b; // 5.5Mbps
+ aryRates[2] = 0x04; // 2Mbps
+ aryRates[3] = 0x02; // 1Mbps
+ }
+ else
+ { //(B/G) Mixed or (A/B/G) Mixed
+ aryRates[0] = 0x6c; // 54Mbps
+ aryRates[1] = 0x60; // 48Mbps
+ aryRates[2] = 0x48; // 36Mbps
+ aryRates[3] = 0x30; // 24Mbps
+ aryRates[4] = 0x16; // 11Mbps
+ aryRates[5] = 0x0b; // 5.5Mbps
+ aryRates[6] = 0x04; // 2Mbps
+ aryRates[7] = 0x02; // 1Mbps
+ }
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
+ break;
+ }
+ break;
+ }
- return TRUE;
+ NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
+ NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
+ DBGPRINT(RT_DEBUG_TRACE, (" RTMPSetDesiredRates (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
+ pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
+ pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
+ pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
+ pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
+ // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
+ MlmeUpdateTxRates(pAdapter, FALSE, 0);
}
-INT Set_SendPSMPAction_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- UCHAR mac[6], mode;
- PSTRING token;
- STRING sepValue[] = ":", DASH = '-';
- INT i;
- MAC_TABLE_ENTRY *pEntry;
-
- //DBGPRINT(RT_DEBUG_TRACE,("\n%s\n", arg));
/*
- The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
- =>The six 2 digit hex-decimal number previous are the Mac address,
- =>The seventh decimal number is the mode value.
-*/
- if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and mode value in decimal format.
- return FALSE;
-
- token = strchr(arg, DASH);
- if ((token != NULL) && (strlen(token)>1))
- {
- mode = simple_strtol((token+1), 0, 10);
- if (mode > MMPS_ENABLE)
- return FALSE;
+ ========================================================================
- *token = '\0';
- for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
- {
- if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
- return FALSE;
- AtoH(token, (&mac[i]), 1);
- }
- if(i != 6)
- return FALSE;
+ Routine Description:
+ Remove All WPA Keys
- DBGPRINT(RT_DEBUG_OFF, ("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x",
- mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], mode));
+ Arguments:
+ pAd Pointer to our adapter
- pEntry = MacTableLookup(pAd, mac);
+ Return Value:
+ None
- if (pEntry) {
- DBGPRINT(RT_DEBUG_OFF, ("\nSendPSMPAction MIPS mode = %d\n", mode));
- SendPSMPAction(pAd, pEntry->Aid, mode);
- }
+ IRQL = DISPATCH_LEVEL
- return TRUE;
- }
+ Note:
- return FALSE;
+ ========================================================================
+*/
+VOID RTMPWPARemoveAllKeys(
+ IN PRTMP_ADAPTER pAd)
+{
+ UCHAR i;
-}
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveAllKeys(AuthMode=%d, WepStatus=%d)\n", pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus));
+ RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+ // For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after
+ // Link up. And it will be replaced if user changed it.
+ if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
+ return;
-INT Set_HtMIMOPSmode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
+ // For WPA-None, there is no need to remove it, since WinXP won't set it again after
+ // Link up. And it will be replaced if user changed it.
+ if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
+ return;
- Value = simple_strtol(arg, 0, 10);
+ // set BSSID wcid entry of the Pair-wise Key table as no-security mode
+ AsicRemovePairwiseKeyEntry(pAd, BSS0, BSSID_WCID);
- if (Value <=3 && Value >= 0)
- pAd->CommonCfg.BACapability.field.MMPSmode = Value;
- else
- pAd->CommonCfg.BACapability.field.MMPSmode = 3;
+ // set all shared key mode as no-security.
+ for (i = 0; i < SHARE_KEY_NUM; i++)
+ {
+ DBGPRINT(RT_DEBUG_TRACE,("remove %s key #%d\n", CipherName[pAd->SharedKey[BSS0][i].CipherAlg], i));
+ NdisZeroMemory(&pAd->SharedKey[BSS0][i], sizeof(CIPHER_KEY));
- SetCommonHT(pAd);
+ AsicRemoveSharedKeyEntry(pAd, BSS0, i);
+ }
+ RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+}
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMIMOPSmode_Proc::(MIMOPS mode=%d)\n",pAd->CommonCfg.BACapability.field.MMPSmode));
- return TRUE;
-}
+/*
+ ========================================================================
+ Routine Description:
+ As STA's BSSID is a WC too, it uses shared key table.
+ This function write correct unicast TX key to ASIC WCID.
+ And we still make a copy in our MacTab.Content[BSSID_WCID].PairwiseKey.
+ Caller guarantee TKIP/AES always has keyidx = 0. (pairwise key)
+ Caller guarantee WEP calls this function when set Txkey, default key index=0~3.
-INT Set_ForceShortGI_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
+ Arguments:
+ pAd Pointer to our adapter
+ pKey Pointer to the where the key stored
- Value = simple_strtol(arg, 0, 10);
- if (Value == 0)
- pAd->WIFItestbed.bShortGI = FALSE;
- else if (Value == 1)
- pAd->WIFItestbed.bShortGI = TRUE;
- else
- return FALSE; //Invalid argument
+ Return Value:
+ NDIS_SUCCESS Add key successfully
- SetCommonHT(pAd);
+ IRQL = DISPATCH_LEVEL
- DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceShortGI_Proc::(ForceShortGI=%d)\n", pAd->WIFItestbed.bShortGI));
+ Note:
- return TRUE;
-}
+ ========================================================================
+*/
+/*
+ ========================================================================
+ Routine Description:
+ Change NIC PHY mode. Re-association may be necessary. possible settings
+ include - PHY_11B, PHY_11BG_MIXED, PHY_11A, and PHY_11ABG_MIXED
+ Arguments:
+ pAd - Pointer to our adapter
+ phymode -
+ IRQL = PASSIVE_LEVEL
+ IRQL = DISPATCH_LEVEL
-INT Set_ForceGF_Proc(
+ ========================================================================
+*/
+VOID RTMPSetPhyMode(
IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
+ IN ULONG phymode)
{
- ULONG Value;
+ INT i;
+ // the selected phymode must be supported by the RF IC encoded in E2PROM
- Value = simple_strtol(arg, 0, 10);
- if (Value == 0)
- pAd->WIFItestbed.bGreenField = FALSE;
- else if (Value == 1)
- pAd->WIFItestbed.bGreenField = TRUE;
- else
- return FALSE; //Invalid argument
+ // if no change, do nothing
+ /* bug fix
+ if (pAd->CommonCfg.PhyMode == phymode)
+ return;
+ */
+ pAd->CommonCfg.PhyMode = (UCHAR)phymode;
- SetCommonHT(pAd);
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel));
- DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceGF_Proc::(ForceGF=%d)\n", pAd->WIFItestbed.bGreenField));
+ BuildChannelList(pAd);
- return TRUE;
-}
+ // sanity check user setting
+ for (i = 0; i < pAd->ChannelListNum; i++)
+ {
+ if (pAd->CommonCfg.Channel == pAd->ChannelList[i].Channel)
+ break;
+ }
-INT Set_HtMimoPs_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG Value;
+ if (i == pAd->ChannelListNum)
+ {
+ pAd->CommonCfg.Channel = FirstChannel(pAd);
+ DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
+ }
- Value = simple_strtol(arg, 0, 10);
- if (Value == 0)
- pAd->CommonCfg.bMIMOPSEnable = FALSE;
- else if (Value == 1)
- pAd->CommonCfg.bMIMOPSEnable = TRUE;
- else
- return FALSE; //Invalid argument
+ NdisZeroMemory(pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES);
+ NdisZeroMemory(pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
+ NdisZeroMemory(pAd->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
+ switch (phymode) {
+ case PHY_11B:
+ pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRateLen = 4;
+ pAd->CommonCfg.ExtRateLen = 0;
+ pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps
+ //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use
+ break;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMimoPs_Proc::(HtMimoPs=%d)\n",pAd->CommonCfg.bMIMOPSEnable));
+ case PHY_11G:
+ case PHY_11BG_MIXED:
+ case PHY_11ABG_MIXED:
+ case PHY_11N_2_4G:
+ case PHY_11ABGN_MIXED:
+ case PHY_11BGN_MIXED:
+ case PHY_11GN_MIXED:
+ pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[4] = 0x12; // 9 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[5] = 0x24; // 18 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[6] = 0x48; // 36 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRateLen = 8;
+ pAd->CommonCfg.ExtRate[0] = 0x0C; // 6 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.ExtRate[1] = 0x18; // 12 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.ExtRate[2] = 0x30; // 24 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.ExtRate[3] = 0x60; // 48 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.ExtRateLen = 4;
+ pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[4] = 12; // 6 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[5] = 18; // 9 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[6] = 24; // 12 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[7] = 36; // 18 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[8] = 48; // 24 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[9] = 72; // 36 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[10] = 96; // 48 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[11] = 108; // 54 mbps, in units of 0.5 Mbps
+ break;
- return TRUE;
-}
+ case PHY_11A:
+ case PHY_11AN_MIXED:
+ case PHY_11AGN_MIXED:
+ case PHY_11N_5G:
+ pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[4] = 0xb0; // 24 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRateLen = 8;
+ pAd->CommonCfg.ExtRateLen = 0;
+ pAd->CommonCfg.DesireRate[0] = 12; // 6 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[1] = 18; // 9 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[2] = 24; // 12 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[3] = 36; // 18 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[4] = 48; // 24 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[5] = 72; // 36 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[6] = 96; // 48 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[7] = 108; // 54 mbps, in units of 0.5 Mbps
+ //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use
+ break;
-INT SetCommonHT(
- IN PRTMP_ADAPTER pAd)
-{
- OID_SET_HT_PHYMODE SetHT;
+ default:
+ break;
+ }
- if (pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED)
- return FALSE;
- SetHT.PhyMode = pAd->CommonCfg.PhyMode;
- SetHT.TransmitNo = ((UCHAR)pAd->Antenna.field.TxPath);
- SetHT.HtMode = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.HTMODE;
- SetHT.ExtOffset = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.EXTCHA;
- SetHT.MCS = MCS_AUTO;
- SetHT.BW = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.BW;
- SetHT.STBC = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.STBC;
- SetHT.SHORTGI = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.ShortGI;
+ pAd->CommonCfg.BandState = UNKNOWN_BAND;
+}
- RTMPSetHT(pAd, &SetHT);
+/*
+ ========================================================================
+ Routine Description:
+ Caller ensures we has 802.11n support.
+ Calls at setting HT from AP/STASetinformation
- return TRUE;
-}
+ Arguments:
+ pAd - Pointer to our adapter
+ phymode -
-INT Set_FixedTxMode_Proc(
+ ========================================================================
+*/
+VOID RTMPSetHT(
IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
+ IN OID_SET_HT_PHYMODE *pHTPhyMode)
{
- UCHAR fix_tx_mode = FIXED_TXMODE_HT;
+ //ULONG *pmcs;
+ UINT32 Value = 0;
+ UCHAR BBPValue = 0;
+ UCHAR BBP3Value = 0;
+ UCHAR RxStream = pAd->CommonCfg.RxStream;
- if (strcmp(arg, "OFDM") == 0 || strcmp(arg, "ofdm") == 0)
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n",
+ pHTPhyMode->HtMode, pHTPhyMode->ExtOffset,
+ pHTPhyMode->MCS, pHTPhyMode->BW,
+ pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
+
+ // Don't zero supportedHyPhy structure.
+ RTMPZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability));
+ RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
+ RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset));
+ RTMPZeroMemory(&pAd->CommonCfg.DesiredHtPhy, sizeof(pAd->CommonCfg.DesiredHtPhy));
+
+ if (pAd->CommonCfg.bRdg)
{
- fix_tx_mode = FIXED_TXMODE_OFDM;
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 1;
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 1;
}
- else if (strcmp(arg, "CCK") == 0 || strcmp(arg, "cck") == 0)
+ else
{
- fix_tx_mode = FIXED_TXMODE_CCK;
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 0;
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 0;
}
- pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
+ pAd->CommonCfg.HtCapability.HtCapParm.MaxRAmpduFactor = 3;
+ pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor = 3;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode));
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit));
- return TRUE;
-}
+ // Mimo power save, A-MSDU size,
+ pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
+ pAd->CommonCfg.DesiredHtPhy.AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize;
+ pAd->CommonCfg.DesiredHtPhy.MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode;
+ pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-#if defined(RT305x)||defined(RT3070)
-INT Set_HiPower_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- pAdapter->CommonCfg.HighPowerPatchDisabled = !(simple_strtol(arg, 0, 10));
+ pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
+ pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
+ pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
- if (pAdapter->CommonCfg.HighPowerPatchDisabled != 0)
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : AMsduSize = %d, MimoPs = %d, MpduDensity = %d, MaxRAmpduFactor = %d\n",
+ pAd->CommonCfg.DesiredHtPhy.AmsduSize,
+ pAd->CommonCfg.DesiredHtPhy.MimoPs,
+ pAd->CommonCfg.DesiredHtPhy.MpduDensity,
+ pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor));
+
+ if(pHTPhyMode->HtMode == HTMODE_GF)
{
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R82, 0x62);
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R67, 0x20);
-#ifdef RT3070
- if ((IS_RT3070(pAdapter) && ((pAdapter->MACVersion & 0xffff) < 0x0201)))
-#endif // RT3070 //
- RT30xxWriteRFRegister(pAdapter, RF_R27, 0x23);
+ pAd->CommonCfg.HtCapability.HtCapInfo.GF = 1;
+ pAd->CommonCfg.DesiredHtPhy.GF = 1;
}
- return TRUE;
-}
-#endif
-
-INT Set_LongRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- TX_RTY_CFG_STRUC tx_rty_cfg;
- UCHAR LongRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
- RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
- tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
- RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
- DBGPRINT(RT_DEBUG_TRACE, ("IF Set_LongRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
- return TRUE;
-}
+ else
+ pAd->CommonCfg.DesiredHtPhy.GF = 0;
-INT Set_ShortRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- TX_RTY_CFG_STRUC tx_rty_cfg;
- UCHAR ShortRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
+ // Decide Rx MCSSet
+ switch (RxStream)
+ {
+ case 1:
+ pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
+ pAd->CommonCfg.HtCapability.MCSSet[1] = 0x00;
+ break;
- RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
- tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
- RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
- DBGPRINT(RT_DEBUG_TRACE, ("IF Set_ShortRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
- return TRUE;
-}
+ case 2:
+ pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
+ pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
+ break;
+ case 3: // 3*3
+ pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
+ pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
+ pAd->CommonCfg.HtCapability.MCSSet[2] = 0xff;
+ break;
+ }
-/////////////////////////////////////////////////////////////////////////
-PSTRING RTMPGetRalinkAuthModeStr(
- IN NDIS_802_11_AUTHENTICATION_MODE authMode)
-{
- switch(authMode)
+ if (pAd->CommonCfg.bForty_Mhz_Intolerant && (pAd->CommonCfg.Channel <= 14) && (pHTPhyMode->BW == BW_40) )
{
- case Ndis802_11AuthModeOpen:
- return "OPEN";
- case Ndis802_11AuthModeWPAPSK:
- return "WPAPSK";
- case Ndis802_11AuthModeShared:
- return "SHARED";
- case Ndis802_11AuthModeWPA:
- return "WPA";
- case Ndis802_11AuthModeWPA2:
- return "WPA2";
- case Ndis802_11AuthModeWPA2PSK:
- return "WPA2PSK";
- case Ndis802_11AuthModeWPA1PSKWPA2PSK:
- return "WPAPSKWPA2PSK";
- case Ndis802_11AuthModeWPA1WPA2:
- return "WPA1WPA2";
- case Ndis802_11AuthModeWPANone:
- return "WPANONE";
- default:
- return "UNKNOW";
+ pHTPhyMode->BW = BW_20;
+ pAd->CommonCfg.HtCapability.HtCapInfo.Forty_Mhz_Intolerant = 1;
}
-}
-PSTRING RTMPGetRalinkEncryModeStr(
- IN USHORT encryMode)
-{
- switch(encryMode)
+ if(pHTPhyMode->BW == BW_40)
{
- case Ndis802_11WEPDisabled:
- return "NONE";
- case Ndis802_11WEPEnabled:
- return "WEP";
- case Ndis802_11Encryption2Enabled:
- return "TKIP";
- case Ndis802_11Encryption3Enabled:
- return "AES";
- case Ndis802_11Encryption4Enabled:
- return "TKIPAES";
- default:
- return "UNKNOW";
- }
-}
+ pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1; // MCS 32
+ pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 1;
+ if (pAd->CommonCfg.Channel <= 14)
+ pAd->CommonCfg.HtCapability.HtCapInfo.CCKmodein40 = 1;
+
+ pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 1;
+ pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 1;
+ pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = (pHTPhyMode->ExtOffset == EXTCHA_BELOW)? (EXTCHA_BELOW): EXTCHA_ABOVE;
+ // Set Regsiter for extension channel position.
+ RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBP3Value);
+ if ((pHTPhyMode->ExtOffset == EXTCHA_BELOW))
+ {
+ Value |= 0x1;
+ BBP3Value |= (0x20);
+ RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
+ }
+ else if ((pHTPhyMode->ExtOffset == EXTCHA_ABOVE))
+ {
+ Value &= 0xfe;
+ BBP3Value &= (~0x20);
+ RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
+ }
-INT RTMPShowCfgValue(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING pName,
- IN PSTRING pBuf)
-{
- INT Status = 0;
+ // Turn on BBP 40MHz mode now only as AP .
+ // Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection.
+ if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd)
+ )
+ {
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+ BBPValue &= (~0x18);
+ BBPValue |= 0x10;
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
- for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBP3Value);
+ pAd->CommonCfg.BBPCurrentBW = BW_40;
+ }
+ }
+ else
{
- if (!strcmp(pName, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name))
+ pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 0;
+ pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 0;
+ pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
+ pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE;
+ pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
+ // Turn on BBP 20MHz mode by request here.
{
- if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->show_proc(pAd, pBuf))
- Status = -EINVAL;
- break; //Exit for loop.
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+ BBPValue &= (~0x18);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+ pAd->CommonCfg.BBPCurrentBW = BW_20;
}
}
- if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name == NULL)
+ if(pHTPhyMode->STBC == STBC_USE)
+ {
+ pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 1;
+ pAd->CommonCfg.DesiredHtPhy.TxSTBC = 1;
+ pAd->CommonCfg.HtCapability.HtCapInfo.RxSTBC = 1;
+ pAd->CommonCfg.DesiredHtPhy.RxSTBC = 1;
+ }
+ else
{
- sprintf(pBuf, "\n");
- for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
- sprintf(pBuf + strlen(pBuf), "%s\n", PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name);
+ pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
+ pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
}
- return Status;
-}
+ if(pHTPhyMode->SHORTGI == GI_400)
+ {
+ pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1;
+ pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 1;
+ pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 1;
+ pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 1;
+ }
+ else
+ {
+ pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 0;
+ pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 0;
+ pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 0;
+ pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 0;
+ }
-INT Show_SSID_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
- return 0;
-}
+ // We support link adaptation for unsolicit MCS feedback, set to 2.
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE; //MCSFBK_UNSOLICIT;
+ pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel;
+ // 1, the extension channel above the control channel.
-INT Show_WirelessMode_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- switch(pAd->CommonCfg.PhyMode)
+ // EDCA parameters used for AP's own transmission
+ if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
{
- case PHY_11BG_MIXED:
- sprintf(pBuf, "\t11B/G");
- break;
- case PHY_11B:
- sprintf(pBuf, "\t11B");
- break;
- case PHY_11A:
- sprintf(pBuf, "\t11A");
- break;
- case PHY_11ABG_MIXED:
- sprintf(pBuf, "\t11A/B/G");
- break;
- case PHY_11G:
- sprintf(pBuf, "\t11G");
- break;
- case PHY_11ABGN_MIXED:
- sprintf(pBuf, "\t11A/B/G/N");
- break;
- case PHY_11N_2_4G:
- sprintf(pBuf, "\t11N only with 2.4G");
- break;
- case PHY_11GN_MIXED:
- sprintf(pBuf, "\t11G/N");
- break;
- case PHY_11AN_MIXED:
- sprintf(pBuf, "\t11A/N");
- break;
- case PHY_11BGN_MIXED:
- sprintf(pBuf, "\t11B/G/N");
- break;
- case PHY_11AGN_MIXED:
- sprintf(pBuf, "\t11A/G/N");
- break;
- case PHY_11N_5G:
- sprintf(pBuf, "\t11N only with 5G");
- break;
- default:
- sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode);
- break;
- }
- return 0;
-}
+ pAd->CommonCfg.APEdcaParm.bValid = TRUE;
+ pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
+ pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
+ pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
+ pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
+ pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
+ pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
+ pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
+ pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
-INT Show_TxBurst_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%s", pAd->CommonCfg.bEnableTxBurst ? "TRUE":"FALSE");
- return 0;
-}
+ pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6;
+ pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10;
+ pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
+ pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
-INT Show_TxPreamble_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- switch(pAd->CommonCfg.TxPreamble)
- {
- case Rt802_11PreambleShort:
- sprintf(pBuf, "\tShort");
- break;
- case Rt802_11PreambleLong:
- sprintf(pBuf, "\tLong");
- break;
- case Rt802_11PreambleAuto:
- sprintf(pBuf, "\tAuto");
- break;
- default:
- sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.TxPreamble);
- break;
+ pAd->CommonCfg.APEdcaParm.Txop[0] = 0;
+ pAd->CommonCfg.APEdcaParm.Txop[1] = 0;
+ pAd->CommonCfg.APEdcaParm.Txop[2] = 94;
+ pAd->CommonCfg.APEdcaParm.Txop[3] = 47;
}
+ AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
- return 0;
-}
-
-INT Show_TxPower_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%lu", pAd->CommonCfg.TxPowerPercentage);
- return 0;
-}
+ {
+ RTMPSetIndividualHT(pAd, 0);
+ }
-INT Show_Channel_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%d", pAd->CommonCfg.Channel);
- return 0;
}
-INT Show_BGProtection_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- switch(pAd->CommonCfg.UseBGProtection)
- {
- case 1: //Always On
- sprintf(pBuf, "\tON");
- break;
- case 2: //Always OFF
- sprintf(pBuf, "\tOFF");
- break;
- case 0: //AUTO
- sprintf(pBuf, "\tAuto");
- break;
- default:
- sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.UseBGProtection);
- break;
- }
- return 0;
-}
+/*
+ ========================================================================
+ Routine Description:
+ Caller ensures we has 802.11n support.
+ Calls at setting HT from AP/STASetinformation
-INT Show_RTSThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%u", pAd->CommonCfg.RtsThreshold);
- return 0;
-}
+ Arguments:
+ pAd - Pointer to our adapter
+ phymode -
-INT Show_FragThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
+ ========================================================================
+*/
+VOID RTMPSetIndividualHT(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR apidx)
{
- sprintf(pBuf, "\t%u", pAd->CommonCfg.FragmentThreshold);
- return 0;
-}
+ PRT_HT_PHY_INFO pDesired_ht_phy = NULL;
+ UCHAR TxStream = pAd->CommonCfg.TxStream;
+ UCHAR DesiredMcs = MCS_AUTO;
-INT Show_HtBw_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
+ do
{
- sprintf(pBuf, "\t40 MHz");
- }
- else
+ {
+ pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
+ DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS;
+ //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
+ break;
+ }
+ } while (FALSE);
+
+ if (pDesired_ht_phy == NULL)
{
- sprintf(pBuf, "\t20 MHz");
+ DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetIndividualHT: invalid apidx(%d)\n", apidx));
+ return;
}
- return 0;
-}
-
-INT Show_HtMcs_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
- return 0;
-}
+ RTMPZeroMemory(pDesired_ht_phy, sizeof(RT_HT_PHY_INFO));
-INT Show_HtGi_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- switch(pAd->CommonCfg.RegTransmitSetting.field.ShortGI)
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetIndividualHT : Desired MCS = %d\n", DesiredMcs));
+ // Check the validity of MCS
+ if ((TxStream == 1) && ((DesiredMcs >= MCS_8) && (DesiredMcs <= MCS_15)))
{
- case GI_400:
- sprintf(pBuf, "\tGI_400");
- break;
- case GI_800:
- sprintf(pBuf, "\tGI_800");
- break;
- default:
- sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.ShortGI);
- break;
+ DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS(%d) is invalid in 1S, reset it as MCS_7\n", DesiredMcs));
+ DesiredMcs = MCS_7;
}
- return 0;
-}
-INT Show_HtOpMode_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- switch(pAd->CommonCfg.RegTransmitSetting.field.HTMODE)
+ if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_20) && (DesiredMcs == MCS_32))
{
- case HTMODE_GF:
- sprintf(pBuf, "\tGF");
- break;
- case HTMODE_MM:
- sprintf(pBuf, "\tMM");
- break;
- default:
- sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.HTMODE);
- break;
+ DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS_32 is only supported in 40-MHz, reset it as MCS_0\n"));
+ DesiredMcs = MCS_0;
}
- return 0;
-}
-INT Show_HtExtcha_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- switch(pAd->CommonCfg.RegTransmitSetting.field.EXTCHA)
+ pDesired_ht_phy->bHtEnable = TRUE;
+
+ // Decide desired Tx MCS
+ switch (TxStream)
{
- case EXTCHA_BELOW:
- sprintf(pBuf, "\tBelow");
+ case 1:
+ if (DesiredMcs == MCS_AUTO)
+ {
+ pDesired_ht_phy->MCSSet[0]= 0xff;
+ pDesired_ht_phy->MCSSet[1]= 0x00;
+ }
+ else if (DesiredMcs <= MCS_7)
+ {
+ pDesired_ht_phy->MCSSet[0]= 1<<DesiredMcs;
+ pDesired_ht_phy->MCSSet[1]= 0x00;
+ }
break;
- case EXTCHA_ABOVE:
- sprintf(pBuf, "\tAbove");
+
+ case 2:
+ if (DesiredMcs == MCS_AUTO)
+ {
+ pDesired_ht_phy->MCSSet[0]= 0xff;
+ pDesired_ht_phy->MCSSet[1]= 0xff;
+ }
+ else if (DesiredMcs <= MCS_15)
+ {
+ ULONG mode;
+
+ mode = DesiredMcs / 8;
+ if (mode < 2)
+ pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
+ }
break;
- default:
- sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.EXTCHA);
+
+ case 3: // 3*3
+ if (DesiredMcs == MCS_AUTO)
+ {
+ /* MCS0 ~ MCS23, 3 bytes */
+ pDesired_ht_phy->MCSSet[0]= 0xff;
+ pDesired_ht_phy->MCSSet[1]= 0xff;
+ pDesired_ht_phy->MCSSet[2]= 0xff;
+ }
+ else if (DesiredMcs <= MCS_23)
+ {
+ ULONG mode;
+
+ mode = DesiredMcs / 8;
+ if (mode < 3)
+ pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
+ }
break;
}
- return 0;
-}
+ if(pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_40)
+ {
+ if (DesiredMcs == MCS_AUTO || DesiredMcs == MCS_32)
+ pDesired_ht_phy->MCSSet[4] = 0x1;
+ }
-INT Show_HtMpduDensity_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.MpduDensity);
- return 0;
+ // update HT Rate setting
+ if (pAd->OpMode == OPMODE_STA)
+ MlmeUpdateHtTxRates(pAd, BSS0);
+ else
+ MlmeUpdateHtTxRates(pAd, apidx);
}
-INT Show_HtBaWinSize_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.RxBAWinLimit);
- return 0;
-}
-INT Show_HtRdg_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%s", pAd->CommonCfg.bRdg ? "TRUE":"FALSE");
- return 0;
-}
+/*
+ ========================================================================
+ Routine Description:
+ Update HT IE from our capability.
-INT Show_HtAmsdu_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AmsduEnable ? "TRUE":"FALSE");
- return 0;
-}
+ Arguments:
+ Send all HT IE in beacon/probe rsp/assoc rsp/action frame.
-INT Show_HtAutoBa_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE");
- return 0;
-}
-INT Show_CountryRegion_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
+ ========================================================================
+*/
+VOID RTMPUpdateHTIE(
+ IN RT_HT_CAPABILITY *pRtHt,
+ IN UCHAR *pMcsSet,
+ OUT HT_CAPABILITY_IE *pHtCapability,
+ OUT ADD_HT_INFO_IE *pAddHtInfo)
{
- sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegion);
- return 0;
-}
+ RTMPZeroMemory(pHtCapability, sizeof(HT_CAPABILITY_IE));
+ RTMPZeroMemory(pAddHtInfo, sizeof(ADD_HT_INFO_IE));
-INT Show_CountryRegionABand_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegionForABand);
- return 0;
-}
+ pHtCapability->HtCapInfo.ChannelWidth = pRtHt->ChannelWidth;
+ pHtCapability->HtCapInfo.MimoPs = pRtHt->MimoPs;
+ pHtCapability->HtCapInfo.GF = pRtHt->GF;
+ pHtCapability->HtCapInfo.ShortGIfor20 = pRtHt->ShortGIfor20;
+ pHtCapability->HtCapInfo.ShortGIfor40 = pRtHt->ShortGIfor40;
+ pHtCapability->HtCapInfo.TxSTBC = pRtHt->TxSTBC;
+ pHtCapability->HtCapInfo.RxSTBC = pRtHt->RxSTBC;
+ pHtCapability->HtCapInfo.AMsduSize = pRtHt->AmsduSize;
+ pHtCapability->HtCapParm.MaxRAmpduFactor = pRtHt->MaxRAmpduFactor;
+ pHtCapability->HtCapParm.MpduDensity = pRtHt->MpduDensity;
-INT Show_CountryCode_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%s", pAd->CommonCfg.CountryCode);
- return 0;
-}
+ pAddHtInfo->AddHtInfo.ExtChanOffset = pRtHt->ExtChanOffset ;
+ pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth;
+ pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode;
+ pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent;
+ RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet*/pMcsSet, 4); // rt2860 only support MCS max=32, no need to copy all 16 uchar.
-#ifdef AGGREGATION_SUPPORT
-INT Show_PktAggregate_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%s", pAd->CommonCfg.bAggregationCapable ? "TRUE":"FALSE");
- return 0;
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n"));
}
-#endif // AGGREGATION_SUPPORT //
-#ifdef WMM_SUPPORT
-INT Show_WmmCapable_Proc(
+/*
+ ========================================================================
+ Description:
+ Add Client security information into ASIC WCID table and IVEIV table.
+ Return:
+ ========================================================================
+*/
+VOID RTMPAddWcidAttributeEntry(
IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
+ IN UCHAR BssIdx,
+ IN UCHAR KeyIdx,
+ IN UCHAR CipherAlg,
+ IN MAC_TABLE_ENTRY *pEntry)
{
- sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
+ UINT32 WCIDAttri = 0;
+ USHORT offset;
+ UCHAR IVEIV = 0;
+ USHORT Wcid = 0;
- return 0;
-}
-#endif // WMM_SUPPORT //
+ {
+ {
+ if (BssIdx > BSS0)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("RTMPAddWcidAttributeEntry: The BSS-index(%d) is out of range for Infra link. \n", BssIdx));
+ return;
+ }
-INT Show_IEEE80211H_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- sprintf(pBuf, "\t%s", pAd->CommonCfg.bIEEE80211H ? "TRUE":"FALSE");
- return 0;
-}
+ // 1. In ADHOC mode, the AID is wcid number. And NO mesh link exists.
+ // 2. In Infra mode, the AID:1 MUST be wcid of infra STA.
+ // the AID:2~ assign to mesh link entry.
+ if (pEntry)
+ Wcid = pEntry->Aid;
+ else
+ Wcid = MCAST_WCID;
+ }
+ }
+
+ // Update WCID attribute table
+ offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
-INT Show_NetworkType_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- switch(pAd->StaCfg.BssType)
{
- case BSS_ADHOC:
- sprintf(pBuf, "\tAdhoc");
- break;
- case BSS_INFRA:
- sprintf(pBuf, "\tInfra");
- break;
- case BSS_ANY:
- sprintf(pBuf, "\tAny");
- break;
- case BSS_MONITOR:
- sprintf(pBuf, "\tMonitor");
- break;
- default:
- sprintf(pBuf, "\tUnknow Value(%d)", pAd->StaCfg.BssType);
- break;
+ if (pEntry && pEntry->ValidAsMesh)
+ WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
+ else
+ WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE;
}
- return 0;
-}
-
+ RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
-INT Show_AuthMode_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- NDIS_802_11_AUTHENTICATION_MODE AuthMode = Ndis802_11AuthModeOpen;
- AuthMode = pAd->StaCfg.AuthMode;
+ // Update IV/EIV table
+ offset = MAC_IVEIV_TABLE_BASE + (Wcid * HW_IVEIV_ENTRY_SIZE);
- if ((AuthMode >= Ndis802_11AuthModeOpen) &&
- (AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
- sprintf(pBuf, "\t%s", RTMPGetRalinkAuthModeStr(AuthMode));
+ // WPA mode
+ if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) || (CipherAlg == CIPHER_AES))
+ {
+ // Eiv bit on. keyid always is 0 for pairwise key
+ IVEIV = (KeyIdx <<6) | 0x20;
+ }
else
- sprintf(pBuf, "\tUnknow Value(%d)", AuthMode);
-
- return 0;
-}
-
-INT Show_EncrypType_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- NDIS_802_11_WEP_STATUS WepStatus = Ndis802_11WEPDisabled;
+ {
+ // WEP KeyIdx is default tx key.
+ IVEIV = (KeyIdx << 6);
+ }
- WepStatus = pAd->StaCfg.WepStatus;
+ // For key index and ext IV bit, so only need to update the position(offset+3).
+#ifdef RTMP_MAC_PCI
+ RTMP_IO_WRITE8(pAd, offset+3, IVEIV);
+#endif // RTMP_MAC_PCI //
+#ifdef RTMP_MAC_USB
+ RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV);
+#endif // RTMP_MAC_USB //
- if ((WepStatus >= Ndis802_11WEPEnabled) &&
- (WepStatus <= Ndis802_11Encryption4KeyAbsent))
- sprintf(pBuf, "\t%s", RTMPGetRalinkEncryModeStr(WepStatus));
- else
- sprintf(pBuf, "\tUnknow Value(%d)", WepStatus);
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg]));
+ DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri));
- return 0;
}
-INT Show_DefaultKeyID_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- UCHAR DefaultKeyId = 0;
-
- DefaultKeyId = pAd->StaCfg.DefaultKeyId;
-
- sprintf(pBuf, "\t%d", DefaultKeyId);
+/*
+ ==========================================================================
+ Description:
+ Parse encryption type
+Arguments:
+ pAdapter Pointer to our adapter
+ wrq Pointer to the ioctl argument
- return 0;
-}
+ Return Value:
+ None
-INT Show_WepKey_Proc(
- IN PRTMP_ADAPTER pAd,
- IN INT KeyIdx,
- OUT PSTRING pBuf)
+ Note:
+ ==========================================================================
+*/
+PSTRING GetEncryptType(CHAR enc)
{
- UCHAR Key[16] = {0}, KeyLength = 0;
- INT index = BSS0;
-
- KeyLength = pAd->SharedKey[index][KeyIdx].KeyLen;
- NdisMoveMemory(Key, pAd->SharedKey[index][KeyIdx].Key, KeyLength);
-
- //check key string is ASCII or not
- if (RTMPCheckStrPrintAble((PCHAR)Key, KeyLength))
- sprintf(pBuf, "\t%s", Key);
+ if(enc == Ndis802_11WEPDisabled)
+ return "NONE";
+ if(enc == Ndis802_11WEPEnabled)
+ return "WEP";
+ if(enc == Ndis802_11Encryption2Enabled)
+ return "TKIP";
+ if(enc == Ndis802_11Encryption3Enabled)
+ return "AES";
+ if(enc == Ndis802_11Encryption4Enabled)
+ return "TKIPAES";
else
- {
- int idx;
- sprintf(pBuf, "\t");
- for (idx = 0; idx < KeyLength; idx++)
- sprintf(pBuf+strlen(pBuf), "%02X", Key[idx]);
- }
- return 0;
-}
-
-INT Show_Key1_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- Show_WepKey_Proc(pAd, 0, pBuf);
- return 0;
+ return "UNKNOW";
}
-INT Show_Key2_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
+PSTRING GetAuthMode(CHAR auth)
{
- Show_WepKey_Proc(pAd, 1, pBuf);
- return 0;
-}
+ if(auth == Ndis802_11AuthModeOpen)
+ return "OPEN";
+ if(auth == Ndis802_11AuthModeShared)
+ return "SHARED";
+ if(auth == Ndis802_11AuthModeAutoSwitch)
+ return "AUTOWEP";
+ if(auth == Ndis802_11AuthModeWPA)
+ return "WPA";
+ if(auth == Ndis802_11AuthModeWPAPSK)
+ return "WPAPSK";
+ if(auth == Ndis802_11AuthModeWPANone)
+ return "WPANONE";
+ if(auth == Ndis802_11AuthModeWPA2)
+ return "WPA2";
+ if(auth == Ndis802_11AuthModeWPA2PSK)
+ return "WPA2PSK";
+ if(auth == Ndis802_11AuthModeWPA1WPA2)
+ return "WPA1WPA2";
+ if(auth == Ndis802_11AuthModeWPA1PSKWPA2PSK)
+ return "WPA1PSKWPA2PSK";
-INT Show_Key3_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- Show_WepKey_Proc(pAd, 2, pBuf);
- return 0;
+ return "UNKNOW";
}
-INT Show_Key4_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
+INT SetCommonHT(
+ IN PRTMP_ADAPTER pAd)
{
- Show_WepKey_Proc(pAd, 3, pBuf);
- return 0;
-}
+ OID_SET_HT_PHYMODE SetHT;
-INT Show_WPAPSK_Proc(
- IN PRTMP_ADAPTER pAd,
- OUT PSTRING pBuf)
-{
- INT idx;
- UCHAR PMK[32] = {0};
+ if (pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED)
+ return FALSE;
- NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
+ SetHT.PhyMode = pAd->CommonCfg.PhyMode;
+ SetHT.TransmitNo = ((UCHAR)pAd->Antenna.field.TxPath);
+ SetHT.HtMode = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.HTMODE;
+ SetHT.ExtOffset = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.EXTCHA;
+ SetHT.MCS = MCS_AUTO;
+ SetHT.BW = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.BW;
+ SetHT.STBC = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.STBC;
+ SetHT.SHORTGI = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.ShortGI;
- sprintf(pBuf, "\tPMK = ");
- for (idx = 0; idx < 32; idx++)
- sprintf(pBuf+strlen(pBuf), "%02X", PMK[idx]);
+ RTMPSetHT(pAd, &SetHT);
- return 0;
+ return TRUE;
}
+PSTRING RTMPGetRalinkEncryModeStr(
+ IN USHORT encryMode)
+{
+ switch(encryMode)
+ {
+ case Ndis802_11WEPDisabled:
+ return "NONE";
+ case Ndis802_11WEPEnabled:
+ return "WEP";
+ case Ndis802_11Encryption2Enabled:
+ return "TKIP";
+ case Ndis802_11Encryption3Enabled:
+ return "AES";
+ case Ndis802_11Encryption4Enabled:
+ return "TKIPAES";
+ default:
+ return "UNKNOW";
+ }
+}
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -4237,17 +4237,9 @@ INT RT_CfgSetWPAPSKKey(
//
// Prototypes of function definition in cmm_info.c
//
-NDIS_STATUS RTMPWPARemoveKeyProc(
- IN PRTMP_ADAPTER pAd,
- IN PVOID pBuf);
-
VOID RTMPWPARemoveAllKeys(
IN PRTMP_ADAPTER pAd);
-BOOLEAN RTMPCheckStrPrintAble(
- IN CHAR *pInPutStr,
- IN UCHAR strLen);
-
VOID RTMPSetPhyMode(
IN PRTMP_ADAPTER pAd,
IN ULONG phymode);
@@ -4683,183 +4675,9 @@ int rtinet_aton(
unsigned int *addr);
////////// common ioctl functions //////////
-INT Set_DriverVersion_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_CountryRegion_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_CountryRegionABand_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_WirelessMode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_Channel_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_ShortSlot_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_TxPower_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_BGProtection_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_TxPreamble_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_RTSThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_FragThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_TxBurst_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-#ifdef AGGREGATION_SUPPORT
-INT Set_PktAggregate_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-#endif // AGGREGATION_SUPPORT //
-
-INT Set_IEEE80211H_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-#ifdef DBG
-INT Set_Debug_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-#endif
-
-INT Show_DescInfo_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_ResetStatCounter_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_BASetup_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_BADecline_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_BAOriTearDown_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_BARecTearDown_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtBw_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtMcs_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtGi_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtOpMode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtStbc_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtHtc_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtExtcha_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtMpduDensity_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtBaWinSize_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtRdg_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtLinkAdapt_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtAmsdu_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtAutoBa_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtProtect_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtMimoPs_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-
-INT Set_ForceShortGI_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_ForceGF_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
INT SetCommonHT(
IN PRTMP_ADAPTER pAd);
-INT Set_SendPSMPAction_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtMIMOPSmode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-
-INT Set_HtTxBASize_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_HtDisallowTKIP_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
INT WpaCheckEapCode(
IN PRTMP_ADAPTER pAd,
IN PUCHAR pFrame,
@@ -5103,15 +4921,6 @@ INT Set_FixedTxMode_Proc(
IN PRTMP_ADAPTER pAd,
IN PSTRING arg);
-
-INT Set_LongRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_ShortRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
BOOLEAN RT28XXChipsetCheck(
IN void *_dev_p);
@@ -5661,19 +5470,6 @@ void RtmpTimerQInit(
IN RTMP_ADAPTER *pAd);
#endif // RTMP_TIMER_TASK_SUPPORT //
-///////////////////////////////////////
-INT RTMPShowCfgValue(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING pName,
- IN PSTRING pBuf);
-
-PSTRING RTMPGetRalinkAuthModeStr(
- IN NDIS_802_11_AUTHENTICATION_MODE authMode);
-
-PSTRING RTMPGetRalinkEncryModeStr(
- IN USHORT encryMode);
-//////////////////////////////////////
-
VOID AsicStaBbpTuning(
IN PRTMP_ADAPTER pAd);
Index: b/drivers/staging/rt2860/sta_ioctl.c
===================================================================
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -61,42 +61,6 @@ typedef struct PACKED _RT_VERSION_INFO{
UINT DriverBuildDay;
} RT_VERSION_INFO, *PRT_VERSION_INFO;
-struct iw_priv_args privtab[] = {
-{ RTPRIV_IOCTL_SET,
- IW_PRIV_TYPE_CHAR | 1024, 0,
- "set"},
-
-{ RTPRIV_IOCTL_SHOW, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
- ""},
-/* --- sub-ioctls definitions --- */
- { SHOW_CONN_STATUS,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "connStatus" },
- { SHOW_DRVIER_VERION,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "driverVer" },
- { SHOW_BA_INFO,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "bainfo" },
- { SHOW_DESC_INFO,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "descinfo" },
- { RAIO_OFF,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_off" },
- { RAIO_ON,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_on" },
- { SHOW_CFG_VALUE,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "show" },
- { SHOW_ADHOC_ENTRY_INFO,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" },
-/* --- sub-ioctls relations --- */
-
-{ RTPRIV_IOCTL_STATISTICS,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
- "stat"},
-{ RTPRIV_IOCTL_GSITESURVEY,
- 0, IW_PRIV_TYPE_CHAR | 1024,
- "get_site_survey"},
-
-
-};
-
static __s32 ralinkrate[] =
{2, 4, 11, 22, // CCK
12, 18, 24, 36, 48, 72, 96, 108, // OFDM
@@ -113,190 +77,10 @@ INT Set_SSID_Proc(
IN PRTMP_ADAPTER pAdapter,
IN PSTRING arg);
-#ifdef WMM_SUPPORT
-INT Set_WmmCapable_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-#endif
-
INT Set_NetworkType_Proc(
IN PRTMP_ADAPTER pAdapter,
IN PSTRING arg);
-INT Set_AuthMode_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_EncrypType_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_DefaultKeyID_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_Key1_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_Key2_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_Key3_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_Key4_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_WPAPSK_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-
-INT Set_PSMode_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-#ifdef RT3090
-INT Set_PCIePSLevel_Proc(
-IN PRTMP_ADAPTER pAdapter,
-IN PUCHAR arg);
-#endif // RT3090 //
-
-INT Set_Wpa_Support(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-NDIS_STATUS RTMPWPANoneAddKeyProc(
- IN PRTMP_ADAPTER pAd,
- IN PVOID pBuf);
-
-INT Set_FragTest_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_TGnWifiTest_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_LongRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-INT Set_ShortRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg);
-
-
-
-INT Show_Adhoc_MacTable_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING extra);
-
-INT Set_BeaconLostTime_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_AutoRoaming_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_SiteSurvey_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT Set_ForceTxBurst_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-static struct {
- PSTRING name;
- INT (*set_proc)(PRTMP_ADAPTER pAdapter, PSTRING arg);
-} *PRTMP_PRIVATE_SET_PROC, RTMP_PRIVATE_SUPPORT_PROC[] = {
- {"DriverVersion", Set_DriverVersion_Proc},
- {"CountryRegion", Set_CountryRegion_Proc},
- {"CountryRegionABand", Set_CountryRegionABand_Proc},
- {"SSID", Set_SSID_Proc},
- {"WirelessMode", Set_WirelessMode_Proc},
- {"TxBurst", Set_TxBurst_Proc},
- {"TxPreamble", Set_TxPreamble_Proc},
- {"TxPower", Set_TxPower_Proc},
- {"Channel", Set_Channel_Proc},
- {"BGProtection", Set_BGProtection_Proc},
- {"RTSThreshold", Set_RTSThreshold_Proc},
- {"FragThreshold", Set_FragThreshold_Proc},
- {"HtBw", Set_HtBw_Proc},
- {"HtMcs", Set_HtMcs_Proc},
- {"HtGi", Set_HtGi_Proc},
- {"HtOpMode", Set_HtOpMode_Proc},
- {"HtExtcha", Set_HtExtcha_Proc},
- {"HtMpduDensity", Set_HtMpduDensity_Proc},
- {"HtBaWinSize", Set_HtBaWinSize_Proc},
- {"HtRdg", Set_HtRdg_Proc},
- {"HtAmsdu", Set_HtAmsdu_Proc},
- {"HtAutoBa", Set_HtAutoBa_Proc},
- {"HtBaDecline", Set_BADecline_Proc},
- {"HtProtect", Set_HtProtect_Proc},
- {"HtMimoPs", Set_HtMimoPs_Proc},
- {"HtDisallowTKIP", Set_HtDisallowTKIP_Proc},
-#ifdef AGGREGATION_SUPPORT
- {"PktAggregate", Set_PktAggregate_Proc},
-#endif // AGGREGATION_SUPPORT //
-
-#ifdef WMM_SUPPORT
- {"WmmCapable", Set_WmmCapable_Proc},
-#endif
- {"IEEE80211H", Set_IEEE80211H_Proc},
- {"NetworkType", Set_NetworkType_Proc},
- {"AuthMode", Set_AuthMode_Proc},
- {"EncrypType", Set_EncrypType_Proc},
- {"DefaultKeyID", Set_DefaultKeyID_Proc},
- {"Key1", Set_Key1_Proc},
- {"Key2", Set_Key2_Proc},
- {"Key3", Set_Key3_Proc},
- {"Key4", Set_Key4_Proc},
- {"WPAPSK", Set_WPAPSK_Proc},
- {"ResetCounter", Set_ResetStatCounter_Proc},
- {"PSMode", Set_PSMode_Proc},
-#ifdef DBG
- {"Debug", Set_Debug_Proc},
-#endif // DBG //
-
-
- {"WpaSupport", Set_Wpa_Support},
-
-
-
-
-
- {"FixedTxMode", Set_FixedTxMode_Proc},
- {"TGnWifiTest", Set_TGnWifiTest_Proc},
- {"ForceGF", Set_ForceGF_Proc},
- {"LongRetry", Set_LongRetryLimit_Proc},
- {"ShortRetry", Set_ShortRetryLimit_Proc},
-
-//2008/09/11:KH add to support efuse<--
-#ifdef RT30xx
-#ifdef RTMP_EFUSE_SUPPORT
- {"efuseFreeNumber", set_eFuseGetFreeBlockCount_Proc},
- {"efuseDump", set_eFusedump_Proc},
- {"efuseLoadFromBin", set_eFuseLoadFromBin_Proc},
- {"efuseBufferModeWriteBack", set_eFuseBufferModeWriteBack_Proc},
-#endif // RTMP_EFUSE_SUPPORT //
-#endif // RT30xx //
-//2008/09/11:KH add to support efuse-->
- {"BeaconLostTime", Set_BeaconLostTime_Proc},
- {"AutoRoaming", Set_AutoRoaming_Proc},
- {"SiteSurvey", Set_SiteSurvey_Proc},
- {"ForceTxBurst", Set_ForceTxBurst_Proc},
-
- {NULL,}
-};
-
-
VOID RTMPAddKey(
IN PRTMP_ADAPTER pAd,
IN PNDIS_802_11_KEY pKey)
@@ -1656,117 +1440,6 @@ rt_ioctl_giwencode(struct net_device *de
}
-static int
-rt_ioctl_setparam(struct net_device *dev, struct iw_request_info *info,
- void *w, char *extra)
-{
- PRTMP_ADAPTER pAdapter;
- POS_COOKIE pObj;
- PSTRING this_char = extra;
- PSTRING value;
- int Status=0;
-
- GET_PAD_FROM_NET_DEV(pAdapter, dev);
-
- pObj = (POS_COOKIE) pAdapter->OS_Cookie;
- {
- pObj->ioctl_if_type = INT_MAIN;
- pObj->ioctl_if = MAIN_MBSSID;
- }
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (!*this_char)
- return -EINVAL;
-
- if ((value = rtstrchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value && (strcmp(this_char, "SiteSurvey") != 0))
- return -EINVAL;
- else
- goto SET_PROC;
-
- // reject setting nothing besides ANY ssid(ssidLen=0)
- if (!*value && (strcmp(this_char, "SSID") != 0))
- return -EINVAL;
-
-SET_PROC:
- for (PRTMP_PRIVATE_SET_PROC = RTMP_PRIVATE_SUPPORT_PROC; PRTMP_PRIVATE_SET_PROC->name; PRTMP_PRIVATE_SET_PROC++)
- {
- if (strcmp(this_char, PRTMP_PRIVATE_SET_PROC->name) == 0)
- {
- if(!PRTMP_PRIVATE_SET_PROC->set_proc(pAdapter, value))
- { //FALSE:Set private failed then return Invalid argument
- Status = -EINVAL;
- }
- break; //Exit for loop.
- }
- }
-
- if(PRTMP_PRIVATE_SET_PROC->name == NULL)
- { //Not found argument
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_setparam:: (iwpriv) Not Support Set Command [%s=%s]\n", this_char, value));
- }
-
- return Status;
-}
-
-
-static int
-rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
-{
- INT Status = 0;
- PRTMP_ADAPTER pAd = NULL;
-
- GET_PAD_FROM_NET_DEV(pAd, dev);
-
- if (extra == NULL)
- {
- wrq->length = 0;
- return -EIO;
- }
-
- memset(extra, 0x00, IW_PRIV_SIZE_MASK);
- sprintf(extra, "\n\n");
-
- {
- sprintf(extra+strlen(extra), "Tx success = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
- sprintf(extra+strlen(extra), "Tx success without retry = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
- }
- sprintf(extra+strlen(extra), "Tx success after retry = %ld\n", (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
- sprintf(extra+strlen(extra), "Tx fail to Rcv ACK after retry = %ld\n", (ULONG)pAd->WlanCounters.FailedCount.QuadPart);
- sprintf(extra+strlen(extra), "RTS Success Rcv CTS = %ld\n", (ULONG)pAd->WlanCounters.RTSSuccessCount.QuadPart);
- sprintf(extra+strlen(extra), "RTS Fail Rcv CTS = %ld\n", (ULONG)pAd->WlanCounters.RTSFailureCount.QuadPart);
-
- sprintf(extra+strlen(extra), "Rx success = %ld\n", (ULONG)pAd->WlanCounters.ReceivedFragmentCount.QuadPart);
- sprintf(extra+strlen(extra), "Rx with CRC = %ld\n", (ULONG)pAd->WlanCounters.FCSErrorCount.QuadPart);
- sprintf(extra+strlen(extra), "Rx drop due to out of resource = %ld\n", (ULONG)pAd->Counters8023.RxNoBuffer);
- sprintf(extra+strlen(extra), "Rx duplicate frame = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
-
- sprintf(extra+strlen(extra), "False CCA (one second) = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
- {
- sprintf(extra+strlen(extra), "RSSI-A = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
- sprintf(extra+strlen(extra), "RSSI-B (if available) = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
- sprintf(extra+strlen(extra), "RSSI-C (if available) = %ld\n\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi2 - pAd->BbpRssiToDbmDelta));
- }
- sprintf(extra+strlen(extra), "WpaSupplicantUP = %d\n\n", pAd->StaCfg.WpaSupplicantUP);
-
-
-
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- DBGPRINT(RT_DEBUG_TRACE, ("<== rt_private_get_statistics, wrq->length = %d\n", wrq->length));
-
- return Status;
-}
-
void getBaInfo(
IN PRTMP_ADAPTER pAd,
IN PSTRING pOutBuf)
@@ -1814,143 +1487,6 @@ void getBaInfo(
return;
}
-static int
-rt_private_show(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, PSTRING extra)
-{
- INT Status = 0;
- PRTMP_ADAPTER pAd;
- POS_COOKIE pObj;
- u32 subcmd = wrq->flags;
-
- GET_PAD_FROM_NET_DEV(pAd, dev);
-
- pObj = (POS_COOKIE) pAd->OS_Cookie;
- if (extra == NULL)
- {
- wrq->length = 0;
- return -EIO;
- }
- memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
- {
- pObj->ioctl_if_type = INT_MAIN;
- pObj->ioctl_if = MAIN_MBSSID;
- }
-
- switch(subcmd)
- {
-
- case SHOW_CONN_STATUS:
- if (MONITOR_ON(pAd))
- {
- if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
- pAd->CommonCfg.RegTransmitSetting.field.BW)
- sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel);
- else
- sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel);
- }
- else
- {
- if (pAd->IndicateMediaState == NdisMediaStateConnected)
- {
- if (INFRA_ON(pAd))
- {
- sprintf(extra, "Connected(AP: %s[%02X:%02X:%02X:%02X:%02X:%02X])\n",
- pAd->CommonCfg.Ssid,
- pAd->CommonCfg.Bssid[0],
- pAd->CommonCfg.Bssid[1],
- pAd->CommonCfg.Bssid[2],
- pAd->CommonCfg.Bssid[3],
- pAd->CommonCfg.Bssid[4],
- pAd->CommonCfg.Bssid[5]);
- DBGPRINT(RT_DEBUG_TRACE ,("Ssid=%s ,Ssidlen = %d\n",pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen));
- }
- else if (ADHOC_ON(pAd))
- sprintf(extra, "Connected\n");
- }
- else
- {
- sprintf(extra, "Disconnected\n");
- DBGPRINT(RT_DEBUG_TRACE ,("ConnStatus is not connected\n"));
- }
- }
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- case SHOW_DRVIER_VERION:
- sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- case SHOW_BA_INFO:
- getBaInfo(pAd, extra);
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- case SHOW_DESC_INFO:
- {
- Show_DescInfo_Proc(pAd, NULL);
- wrq->length = 0; // 1: size of '\0'
- }
- break;
- case RAIO_OFF:
- if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
- {
- if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)
- {
- RTMP_MLME_RESET_STATE_MACHINE(pAd);
- DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
- }
- }
- pAd->StaCfg.bSwRadio = FALSE;
- if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
- {
- pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
- if (pAd->StaCfg.bRadio == FALSE)
- {
- MlmeRadioOff(pAd);
- // Update extra information
- pAd->ExtraInfo = SW_RADIO_OFF;
- }
- }
- sprintf(extra, "Radio Off\n");
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- case RAIO_ON:
- pAd->StaCfg.bSwRadio = TRUE;
- //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
- {
- pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
- if (pAd->StaCfg.bRadio == TRUE)
- {
- MlmeRadioOn(pAd);
- // Update extra information
- pAd->ExtraInfo = EXTRA_INFO_CLEAR;
- }
- }
- sprintf(extra, "Radio On\n");
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
-
-
-
- case SHOW_CFG_VALUE:
- {
- Status = RTMPShowCfgValue(pAd, (PSTRING) wrq->pointer, extra);
- if (Status == 0)
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- }
- break;
- case SHOW_ADHOC_ENTRY_INFO:
- Show_Adhoc_MacTable_Proc(pAd, extra);
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- default:
- DBGPRINT(RT_DEBUG_TRACE, ("%s - unknow subcmd = %d\n", __func__, subcmd));
- break;
- }
-
- return Status;
-}
-
int rt_ioctl_siwmlme(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
@@ -2774,43 +2310,10 @@ static const iw_handler rt_handler[] =
(iw_handler) rt_ioctl_siwpmksa, /* SIOCSIWPMKSA */
};
-static const iw_handler rt_priv_handlers[] = {
- (iw_handler) NULL, /* + 0x00 */
- (iw_handler) NULL, /* + 0x01 */
- (iw_handler) rt_ioctl_setparam, /* + 0x02 */
- (iw_handler) NULL, /* + 0x03 */
- (iw_handler) NULL, /* + 0x04 */
- (iw_handler) NULL, /* + 0x05 */
- (iw_handler) NULL, /* + 0x06 */
- (iw_handler) NULL, /* + 0x07 */
- (iw_handler) NULL, /* + 0x08 */
- (iw_handler) rt_private_get_statistics, /* + 0x09 */
- (iw_handler) NULL, /* + 0x0A */
- (iw_handler) NULL, /* + 0x0B */
- (iw_handler) NULL, /* + 0x0C */
- (iw_handler) NULL, /* + 0x0D */
- (iw_handler) NULL, /* + 0x0E */
- (iw_handler) NULL, /* + 0x0F */
- (iw_handler) NULL, /* + 0x10 */
- (iw_handler) rt_private_show, /* + 0x11 */
- (iw_handler) NULL, /* + 0x12 */
- (iw_handler) NULL, /* + 0x13 */
- (iw_handler) NULL, /* + 0x14 */
- (iw_handler) NULL, /* + 0x15 */
- (iw_handler) NULL, /* + 0x16 */
- (iw_handler) NULL, /* + 0x17 */
- (iw_handler) NULL, /* + 0x18 */
-};
-
const struct iw_handler_def rt28xx_iw_handler_def =
{
-#define N(a) (sizeof (a) / sizeof (a[0]))
.standard = (iw_handler *) rt_handler,
.num_standard = sizeof(rt_handler) / sizeof(iw_handler),
- .private = (iw_handler *) rt_priv_handlers,
- .num_private = N(rt_priv_handlers),
- .private_args = (struct iw_priv_args *) privtab,
- .num_private_args = N(privtab),
#if IW_HANDLER_VERSION >= 7
.get_wireless_stats = rt28xx_get_wireless_stats,
#endif
@@ -2980,17 +2483,8 @@ INT rt28xx_sta_ioctl(
case RT_PRIV_IOCTL_EXT:
case RTPRIV_IOCTL_SET:
case RTPRIV_IOCTL_GSITESURVEY:
- Status = -EOPNOTSUPP;
- break;
case SIOCGIWPRIV:
- if (wrq->u.data.pointer)
- {
- if ( access_ok(VERIFY_WRITE, wrq->u.data.pointer, sizeof(privtab)) != TRUE)
- break;
- wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
- if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
- Status = -EFAULT;
- }
+ Status = -EOPNOTSUPP;
break;
case SIOCETHTOOL:
break;
@@ -3087,41 +2581,6 @@ INT Set_SSID_Proc(
return success;
}
-#ifdef WMM_SUPPORT
-/*
- ==========================================================================
- Description:
- Set WmmCapable Enable or Disable
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_WmmCapable_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- BOOLEAN bWmmCapable;
-
- bWmmCapable = simple_strtol(arg, 0, 10);
-
- if ((bWmmCapable == 1)
-#ifdef RTMP_MAC_USB
- && (pAd->NumberOfPipes >= 5)
-#endif // RTMP_MAC_USB //
- )
- pAd->CommonCfg.bWmmCapable = TRUE;
- else if (bWmmCapable == 0)
- pAd->CommonCfg.bWmmCapable = FALSE;
- else
- return FALSE; //Invalid argument
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_WmmCapable_Proc::(bWmmCapable=%d)\n",
- pAd->CommonCfg.bWmmCapable));
-
- return TRUE;
-}
-#endif // WMM_SUPPORT //
-
/*
==========================================================================
Description:
@@ -3306,765 +2765,3 @@ INT Set_NetworkType_Proc(
return TRUE;
}
-
-/*
- ==========================================================================
- Description:
- Set Authentication mode
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_AuthMode_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- if ((strcmp(arg, "WEPAUTO") == 0) || (strcmp(arg, "wepauto") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
- else if ((strcmp(arg, "OPEN") == 0) || (strcmp(arg, "open") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
- else if ((strcmp(arg, "SHARED") == 0) || (strcmp(arg, "shared") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
- else if ((strcmp(arg, "WPAPSK") == 0) || (strcmp(arg, "wpapsk") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
- else if ((strcmp(arg, "WPANONE") == 0) || (strcmp(arg, "wpanone") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
- else if ((strcmp(arg, "WPA2PSK") == 0) || (strcmp(arg, "wpa2psk") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
- else if ((strcmp(arg, "WPA") == 0) || (strcmp(arg, "wpa") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
- else if ((strcmp(arg, "WPA2") == 0) || (strcmp(arg, "wpa2") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
- else
- return FALSE;
-
- pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_AuthMode_Proc::(AuthMode=%d)\n", pAdapter->StaCfg.AuthMode));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Encryption Type
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_EncrypType_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- if ((strcmp(arg, "NONE") == 0) || (strcmp(arg, "none") == 0))
- {
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
- pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
- }
- else if ((strcmp(arg, "WEP") == 0) || (strcmp(arg, "wep") == 0))
- {
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
- pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
- }
- else if ((strcmp(arg, "TKIP") == 0) || (strcmp(arg, "tkip") == 0))
- {
- if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- pAdapter->StaCfg.WepStatus = Ndis802_11Encryption2Enabled;
- pAdapter->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption2Enabled;
- }
- else if ((strcmp(arg, "AES") == 0) || (strcmp(arg, "aes") == 0))
- {
- if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- pAdapter->StaCfg.WepStatus = Ndis802_11Encryption3Enabled;
- pAdapter->StaCfg.PairCipher = Ndis802_11Encryption3Enabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption3Enabled;
- }
- else
- return FALSE;
-
- pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_EncrypType_Proc::(EncrypType=%d)\n", pAdapter->StaCfg.WepStatus));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Default Key ID
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_DefaultKeyID_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- ULONG KeyIdx;
-
- KeyIdx = simple_strtol(arg, 0, 10);
- if((KeyIdx >= 1 ) && (KeyIdx <= 4))
- pAdapter->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1 );
- else
- return FALSE; //Invalid argument
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_DefaultKeyID_Proc::(DefaultKeyID=%d)\n", pAdapter->StaCfg.DefaultKeyId));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set WEP KEY1
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Key1_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- int KeyLen;
- int i;
- UCHAR CipherAlg=CIPHER_WEP64;
-
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- KeyLen = strlen(arg);
-
- switch (KeyLen)
- {
- case 5: //wep 40 Ascii type
- pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 10: //wep 40 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
- break;
- case 13: //wep 104 Ascii type
- pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 26: //wep 104 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
- break;
- default: //Invalid argument
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::Invalid argument (=%s)\n", arg));
- return FALSE;
- }
-
- pAdapter->SharedKey[BSS0][0].CipherAlg = CipherAlg;
-
- // Set keys (into ASIC)
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- ; // not support
- else // Old WEP stuff
- {
- AsicAddSharedKeyEntry(pAdapter,
- 0,
- 0,
- pAdapter->SharedKey[BSS0][0].CipherAlg,
- pAdapter->SharedKey[BSS0][0].Key,
- NULL,
- NULL);
- }
-
- return TRUE;
-}
-/*
- ==========================================================================
-
- Description:
- Set WEP KEY2
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Key2_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- int KeyLen;
- int i;
- UCHAR CipherAlg=CIPHER_WEP64;
-
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- KeyLen = strlen(arg);
-
- switch (KeyLen)
- {
- case 5: //wep 40 Ascii type
- pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 10: //wep 40 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
- break;
- case 13: //wep 104 Ascii type
- pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 26: //wep 104 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
- break;
- default: //Invalid argument
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::Invalid argument (=%s)\n", arg));
- return FALSE;
- }
- pAdapter->SharedKey[BSS0][1].CipherAlg = CipherAlg;
-
- // Set keys (into ASIC)
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- ; // not support
- else // Old WEP stuff
- {
- AsicAddSharedKeyEntry(pAdapter,
- 0,
- 1,
- pAdapter->SharedKey[BSS0][1].CipherAlg,
- pAdapter->SharedKey[BSS0][1].Key,
- NULL,
- NULL);
- }
-
- return TRUE;
-}
-/*
- ==========================================================================
- Description:
- Set WEP KEY3
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Key3_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- int KeyLen;
- int i;
- UCHAR CipherAlg=CIPHER_WEP64;
-
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- KeyLen = strlen(arg);
-
- switch (KeyLen)
- {
- case 5: //wep 40 Ascii type
- pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
- break;
- case 10: //wep 40 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
- break;
- case 13: //wep 104 Ascii type
- pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
- break;
- case 26: //wep 104 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
- break;
- default: //Invalid argument
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::Invalid argument (=%s)\n", arg));
- return FALSE;
- }
- pAdapter->SharedKey[BSS0][2].CipherAlg = CipherAlg;
-
- // Set keys (into ASIC)
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- ; // not support
- else // Old WEP stuff
- {
- AsicAddSharedKeyEntry(pAdapter,
- 0,
- 2,
- pAdapter->SharedKey[BSS0][2].CipherAlg,
- pAdapter->SharedKey[BSS0][2].Key,
- NULL,
- NULL);
- }
-
- return TRUE;
-}
-/*
- ==========================================================================
- Description:
- Set WEP KEY4
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Key4_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- int KeyLen;
- int i;
- UCHAR CipherAlg=CIPHER_WEP64;
-
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- KeyLen = strlen(arg);
-
- switch (KeyLen)
- {
- case 5: //wep 40 Ascii type
- pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 10: //wep 40 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
- break;
- case 13: //wep 104 Ascii type
- pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 26: //wep 104 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
- break;
- default: //Invalid argument
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::Invalid argument (=%s)\n", arg));
- return FALSE;
- }
- pAdapter->SharedKey[BSS0][3].CipherAlg = CipherAlg;
-
- // Set keys (into ASIC)
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- ; // not support
- else // Old WEP stuff
- {
- AsicAddSharedKeyEntry(pAdapter,
- 0,
- 3,
- pAdapter->SharedKey[BSS0][3].CipherAlg,
- pAdapter->SharedKey[BSS0][3].Key,
- NULL,
- NULL);
- }
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set WPA PSK key
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_WPAPSK_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- int status;
-
- if ((pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
- (pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
- (pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
- )
- return TRUE; // do nothing
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_WPAPSK_Proc::(WPAPSK=%s)\n", arg));
-
- status = RT_CfgSetWPAPSKKey(pAd, arg, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, pAd->StaCfg.PMK);
- if (status == FALSE)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Set_WPAPSK_Proc(): Set key failed!\n"));
- return FALSE;
- }
- NdisZeroMemory(pAd->StaCfg.WpaPassPhrase, 64);
- NdisMoveMemory(pAd->StaCfg.WpaPassPhrase, arg, strlen(arg));
- pAd->StaCfg.WpaPassPhraseLen = (UINT)strlen(arg);
-
-
-
- if(pAd->StaCfg.BssType == BSS_ADHOC &&
- pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
- {
- pAd->StaCfg.WpaState = SS_NOTUSE;
- }
- else
- {
- // Start STA supplicant state machine
- pAd->StaCfg.WpaState = SS_START;
- }
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Power Saving mode
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_PSMode_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PSTRING arg)
-{
- if (pAdapter->StaCfg.BssType == BSS_INFRA)
- {
- if ((strcmp(arg, "Max_PSP") == 0) ||
- (strcmp(arg, "max_psp") == 0) ||
- (strcmp(arg, "MAX_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckPsmChange()
- // to exclude certain situations.
- if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
- pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
- pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
- OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
- pAdapter->StaCfg.DefaultListenCount = 5;
-
- }
- else if ((strcmp(arg, "Fast_PSP") == 0) ||
- (strcmp(arg, "fast_psp") == 0) ||
- (strcmp(arg, "FAST_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckPsmChange()
- // to exclude certain situations.
- OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
- if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
- pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
- pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
- pAdapter->StaCfg.DefaultListenCount = 3;
- }
- else if ((strcmp(arg, "Legacy_PSP") == 0) ||
- (strcmp(arg, "legacy_psp") == 0) ||
- (strcmp(arg, "LEGACY_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckPsmChange()
- // to exclude certain situations.
- OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
- if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
- pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
- pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
- pAdapter->StaCfg.DefaultListenCount = 3;
- }
- else
- {
- //Default Ndis802_11PowerModeCAM
- // clear PSM bit immediately
- RTMP_SET_PSM_BIT(pAdapter, PWR_ACTIVE);
- OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
- if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
- pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
- pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_PSMode_Proc::(PSMode=%ld)\n", pAdapter->StaCfg.WindowsPowerMode));
- }
- else
- return FALSE;
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set WpaSupport flag.
- Value:
- 0: Driver ignore wpa_supplicant.
- 1: wpa_supplicant initiates scanning and AP selection.
- 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters.
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Wpa_Support(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
-
- if ( simple_strtol(arg, 0, 10) == 0)
- pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
- else if ( simple_strtol(arg, 0, 10) == 1)
- pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
- else if ( simple_strtol(arg, 0, 10) == 2)
- pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE_WITH_WEB_UI;
- else
- pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Wpa_Support::(WpaSupplicantUP=%d)\n", pAd->StaCfg.WpaSupplicantUP));
-
- return TRUE;
-}
-
-INT Set_TGnWifiTest_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- if (simple_strtol(arg, 0, 10) == 0)
- pAd->StaCfg.bTGnWifiTest = FALSE;
- else
- pAd->StaCfg.bTGnWifiTest = TRUE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("IF Set_TGnWifiTest_Proc::(bTGnWifiTest=%d)\n", pAd->StaCfg.bTGnWifiTest));
- return TRUE;
-}
-
-
-
-
-INT Show_Adhoc_MacTable_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING extra)
-{
- INT i;
-
- sprintf(extra, "\n");
-
- sprintf(extra + strlen(extra), "HT Operating Mode : %d\n", pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode);
-
- sprintf(extra + strlen(extra), "\n%-19s%-4s%-4s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n",
- "MAC", "AID", "BSS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC");
-
- for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
- {
- PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-
- if (strlen(extra) > (IW_PRIV_SIZE_MASK - 30))
- break;
- if ((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
- {
- sprintf(extra + strlen(extra), "%02X:%02X:%02X:%02X:%02X:%02X ",
- pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
- pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
- sprintf(extra + strlen(extra), "%-4d", (int)pEntry->Aid);
- sprintf(extra + strlen(extra), "%-4d", (int)pEntry->apidx);
- sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi0);
- sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi1);
- sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi2);
- sprintf(extra + strlen(extra), "%-10s", GetPhyMode(pEntry->HTPhyMode.field.MODE));
- sprintf(extra + strlen(extra), "%-6s", GetBW(pEntry->HTPhyMode.field.BW));
- sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.MCS);
- sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.ShortGI);
- sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.STBC);
- sprintf(extra + strlen(extra), "%-10d, %d, %d%%\n", pEntry->DebugFIFOCount, pEntry->DebugTxCount,
- (pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0);
- sprintf(extra, "%s\n", extra);
- }
- }
-
- return TRUE;
-}
-
-
-INT Set_BeaconLostTime_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- ULONG ltmp = (ULONG)simple_strtol(arg, 0, 10);
-
- if ((ltmp != 0) && (ltmp <= 60))
- pAd->StaCfg.BeaconLostTime = (ltmp * OS_HZ);
-
- DBGPRINT(RT_DEBUG_TRACE, ("IF Set_BeaconLostTime_Proc::(BeaconLostTime=%ld)\n", pAd->StaCfg.BeaconLostTime));
- return TRUE;
-}
-
-INT Set_AutoRoaming_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- if (simple_strtol(arg, 0, 10) == 0)
- pAd->StaCfg.bAutoRoaming = FALSE;
- else
- pAd->StaCfg.bAutoRoaming = TRUE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("IF Set_AutoRoaming_Proc::(bAutoRoaming=%d)\n", pAd->StaCfg.bAutoRoaming));
- return TRUE;
-}
-
-
-/*
- ==========================================================================
- Description:
- Issue a site survey command to driver
- Arguments:
- pAdapter Pointer to our adapter
- wrq Pointer to the ioctl argument
-
- Return Value:
- None
-
- Note:
- Usage:
- 1.) iwpriv ra0 set site_survey
- ==========================================================================
-*/
-INT Set_SiteSurvey_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- NDIS_802_11_SSID Ssid;
-
- //check if the interface is down
- if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (MONITOR_ON(pAd))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
- return -EINVAL;
- }
-
- RTMPZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
- Ssid.SsidLength = 0;
- if ((arg != NULL) &&
- (strlen(arg) <= MAX_LEN_OF_SSID))
- {
- RTMPMoveMemory(Ssid.Ssid, arg, strlen(arg));
- Ssid.SsidLength = strlen(arg);
- }
-
- pAd->StaCfg.bScanReqIsFromWebUI = TRUE;
-
- if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)
- {
- RTMP_MLME_RESET_STATE_MACHINE(pAd);
- DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
- }
-
- // tell CNTL state machine to call NdisMSetInformationComplete() after completing
- // this request, because this request is initiated by NDIS.
- pAd->MlmeAux.CurrReqIsFromNdis = FALSE;
- // Reset allowed scan retries
- pAd->StaCfg.ScanCnt = 0;
- NdisGetSystemUpTime(&pAd->StaCfg.LastScanTime);
-
- MlmeEnqueue(pAd,
- MLME_CNTL_STATE_MACHINE,
- OID_802_11_BSSID_LIST_SCAN,
- Ssid.SsidLength,
- Ssid.Ssid);
-
- RTMP_MLME_HANDLER(pAd);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_SiteSurvey_Proc\n"));
-
- return TRUE;
-}
-
-INT Set_ForceTxBurst_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- if (simple_strtol(arg, 0, 10) == 0)
- pAd->StaCfg.bForceTxBurst = FALSE;
- else
- pAd->StaCfg.bForceTxBurst = TRUE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("IF Set_ForceTxBurst_Proc::(bForceTxBurst=%d)\n", pAd->StaCfg.bForceTxBurst));
- return TRUE;
-}
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 06/12] Staging: rt28x0: remove support for private driver parameters
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
` (4 preceding siblings ...)
2009-10-21 20:44 ` [PATCH 05/12] Staging: rt28x0: remove private WEXT handlers Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:44 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 07/12] Staging: rt28x0: remove optional loading of EEPROM from file in eFuse mode Bartlomiej Zolnierkiewicz
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove support for private driver parameters
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/Makefile | 1
drivers/staging/rt2860/common/cmm_info.c | 2
drivers/staging/rt2860/common/rtmp_init.c | 9 --
drivers/staging/rt2860/rt_profile.c | 95 ------------------------------
drivers/staging/rt2860/rtmp.h | 3
drivers/staging/rt2870/Makefile | 1
6 files changed, 1 insertion(+), 110 deletions(-)
Index: b/drivers/staging/rt2860/Makefile
===================================================================
--- a/drivers/staging/rt2860/Makefile
+++ b/drivers/staging/rt2860/Makefile
@@ -38,7 +38,6 @@ rt2860sta-objs := \
sta/connect.o \
sta/wpa.o \
rt_linux.o \
- rt_profile.o \
rt_main_dev.o \
sta_ioctl.o \
common/ba_action.o \
Index: b/drivers/staging/rt2860/common/rtmp_init.c
===================================================================
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -3439,16 +3439,7 @@ int rt28xx_init(
goto err3;
}
- // Read parameters from Config File
- Status = RTMPReadParametersHook(pAd);
-
DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
- if (Status != NDIS_STATUS_SUCCESS)
- {
- DBGPRINT_ERR(("NICReadRegParameters failed, Status[=0x%08x]\n",Status));
-// goto err4;
- Status = 0;
- }
#ifdef RTMP_MAC_USB
pAd->CommonCfg.bMultipleIRP = FALSE;
Index: b/drivers/staging/rt2860/rt_profile.c
===================================================================
--- a/drivers/staging/rt2860/rt_profile.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- rt_profile.c
-
- Abstract:
-
- Revision History:
- Who When What
- --------- ---------- ----------------------------------------------
- */
-
-#include "rt_config.h"
-
-
-NDIS_STATUS RTMPReadParametersHook(
- IN PRTMP_ADAPTER pAd)
-{
- PSTRING src = NULL;
- RTMP_OS_FD srcf;
- RTMP_OS_FS_INFO osFSInfo;
- INT retval = NDIS_STATUS_FAILURE;
- PSTRING buffer;
-
- buffer = kmalloc(MAX_INI_BUFFER_SIZE, MEM_ALLOC_FLAG);
- if(buffer == NULL)
- return NDIS_STATUS_FAILURE;
- memset(buffer, 0x00, MAX_INI_BUFFER_SIZE);
-
- {
- {
- src = STA_PROFILE_PATH;
- }
- }
-
- if (src && *src)
- {
- RtmpOSFSInfoChange(&osFSInfo, TRUE);
- srcf = RtmpOSFileOpen(src, O_RDONLY, 0);
- if (IS_FILE_OPEN_ERR(srcf))
- {
- DBGPRINT(RT_DEBUG_ERROR, ("Open file \"%s\" failed!\n", src));
- }
- else
- {
- retval =RtmpOSFileRead(srcf, buffer, MAX_INI_BUFFER_SIZE);
- if (retval > 0)
- {
- RTMPSetProfileParameters(pAd, buffer);
- retval = NDIS_STATUS_SUCCESS;
- }
- else
- DBGPRINT(RT_DEBUG_ERROR, ("Read file \"%s\" failed(errCode=%d)!\n", src, retval));
-
- retval = RtmpOSFileClose(srcf);
- if ( retval != 0)
- {
- retval = NDIS_STATUS_FAILURE;
- DBGPRINT(RT_DEBUG_ERROR, ("Close file \"%s\" failed(errCode=%d)!\n", src, retval));
- }
- }
-
- RtmpOSFSInfoChange(&osFSInfo, FALSE);
- }
-
- kfree(buffer);
-
- return (retval);
-
-}
-
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -2453,9 +2453,6 @@ NDIS_STATUS RTMPAllocAdapterBlock(
NDIS_STATUS RTMPAllocTxRxRingMemory(
IN PRTMP_ADAPTER pAd);
-NDIS_STATUS RTMPReadParametersHook(
- IN PRTMP_ADAPTER pAd);
-
NDIS_STATUS RTMPSetProfileParameters(
IN RTMP_ADAPTER *pAd,
IN PSTRING pBuffer);
Index: b/drivers/staging/rt2870/Makefile
===================================================================
--- a/drivers/staging/rt2870/Makefile
+++ b/drivers/staging/rt2870/Makefile
@@ -39,7 +39,6 @@ rt2870sta-objs := \
sta/connect.o \
sta/wpa.o \
rt_linux.o \
- rt_profile.o \
rt_main_dev.o \
sta_ioctl.o \
common/ba_action.o \
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 07/12] Staging: rt28x0: remove optional loading of EEPROM from file in eFuse mode
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
` (5 preceding siblings ...)
2009-10-21 20:44 ` [PATCH 06/12] Staging: rt28x0: remove support for private driver parameters Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:44 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 08/12] Staging: rt28x0: fix some build warnings Bartlomiej Zolnierkiewicz
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 25896 bytes --]
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove optional loading of EEPROM from file in eFuse mode
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/common/cmm_profile.c | 10
drivers/staging/rt2860/common/ee_efuse.c | 788 ----------------------------
drivers/staging/rt2860/common/eeprom.c | 3
drivers/staging/rt2860/common/rtmp_init.c | 9
drivers/staging/rt2860/rt_linux.c | 20
drivers/staging/rt2860/rtmp.h | 21
6 files changed, 1 insertion(+), 850 deletions(-)
Index: b/drivers/staging/rt2860/common/cmm_profile.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_profile.c
+++ b/drivers/staging/rt2860/common/cmm_profile.c
@@ -1194,16 +1194,6 @@ NDIS_STATUS RTMPSetProfileParameters(
retval = RT_CfgSetCountryRegion(pAd, tmpbuf, BAND_5G);
DBGPRINT(RT_DEBUG_TRACE, ("CountryRegionABand=%d\n", pAd->CommonCfg.CountryRegionForABand));
}
-#ifdef RTMP_EFUSE_SUPPORT
-#ifdef RT30xx
- //EfuseBufferMode
- if(RTMPGetKeyParameter("EfuseBufferMode", tmpbuf, 25, pBuffer, TRUE))
- {
- pAd->bEEPROMFile = (UCHAR) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("EfuseBufferMode=%d\n", pAd->bUseEfuse));
- }
-#endif // RT30xx //
-#endif // RTMP_EFUSE_SUPPORT //
//CountryCode
if(RTMPGetKeyParameter("CountryCode", tmpbuf, 25, pBuffer, TRUE))
{
Index: b/drivers/staging/rt2860/common/ee_efuse.c
===================================================================
--- a/drivers/staging/rt2860/common/ee_efuse.c
+++ b/drivers/staging/rt2860/common/ee_efuse.c
@@ -67,21 +67,6 @@ typedef union _EFUSE_CTRL_STRUC {
UINT32 word;
} EFUSE_CTRL_STRUC, *PEFUSE_CTRL_STRUC;
-static VOID eFuseWritePhysical(
- IN PRTMP_ADAPTER pAd,
- PUSHORT lpInBuffer,
- ULONG nInBufferSize,
- PUCHAR lpOutBuffer,
- ULONG nOutBufferSize);
-
-
-static NTSTATUS eFuseWriteRegistersFromBin(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- IN USHORT* pData);
-
-
/*
========================================================================
@@ -281,164 +266,6 @@ static VOID eFuseReadPhysical(
========================================================================
*/
-static VOID eFusePhysicalWriteRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- OUT USHORT* pData)
-{
- EFUSE_CTRL_STRUC eFuseCtrlStruc;
- int i;
- USHORT efuseDataOffset;
- UINT32 data, eFuseDataBuffer[4];
-
- //Step0. Write 16-byte of data to EFUSE_DATA0-3 (0x590-0x59C), where EFUSE_DATA0 is the LSB DW, EFUSE_DATA3 is the MSB DW.
-
- /////////////////////////////////////////////////////////////////
- //read current values of 16-byte block
- RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
-
- //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
- eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
-
- //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
- eFuseCtrlStruc.field.EFSROM_MODE = 1;
-
- //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
- eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
- NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
- RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
- //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
- i = 0;
- while(i < 500)
- {
- RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
-
- if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
- break;
- RTMPusecDelay(2);
- i++;
- }
-
- //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
- efuseDataOffset = EFUSE_DATA3;
- for(i=0; i< 4; i++)
- {
- RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &eFuseDataBuffer[i]);
- efuseDataOffset -= 4;
- }
-
- //Update the value, the offset is multiple of 2, length is 2
- efuseDataOffset = (Offset & 0xc) >> 2;
- data = pData[0] & 0xffff;
- //The offset should be 0x***10 or 0x***00
- if((Offset % 4) != 0)
- {
- eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff) | (data << 16);
- }
- else
- {
- eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff0000) | data;
- }
-
- efuseDataOffset = EFUSE_DATA3;
- for(i=0; i< 4; i++)
- {
- RTMP_IO_WRITE32(pAd, efuseDataOffset, eFuseDataBuffer[i]);
- efuseDataOffset -= 4;
- }
- /////////////////////////////////////////////////////////////////
-
- //Step1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
-
- RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
-
- eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
-
- //Step2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
- eFuseCtrlStruc.field.EFSROM_MODE = 3;
-
- //Step3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
- eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
- NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
- RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
- //Step4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It¡¦s done.
- i = 0;
-
- while(i < 500)
- {
- RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
-
- if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
- break;
-
- RTMPusecDelay(2);
- i++;
- }
-}
-
-/*
-========================================================================
-
- Routine Description:
-
- Arguments:
-
- Return Value:
-
- Note:
-
-========================================================================
-*/
-static VOID eFuseWritePhysical(
- IN PRTMP_ADAPTER pAd,
- PUSHORT lpInBuffer,
- ULONG nInBufferSize,
- PUCHAR lpOutBuffer,
- ULONG nOutBufferSize
-)
-{
- USHORT* pInBuf = (USHORT*)lpInBuffer;
- int i;
- //USHORT* pOutBuf = (USHORT*)ioBuffer;
- USHORT Offset = pInBuf[0]; // addr
- USHORT Length = pInBuf[1]; // length
- USHORT* pValueX = &pInBuf[2]; // value ...
-
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWritePhysical Offset=0x%x, length=%d\n", Offset, Length));
-
- {
- // Little-endian S | S Big-endian
- // addr 3 2 1 0 | 0 1 2 3
- // Ori-V D C B A | A B C D
- // After swapping
- // D C B A | D C B A
- // Both the little and big-endian use the same sequence to write data.
- // Therefore, we only need swap data when read the data.
- for (i=0; i<Length; i+=2)
- {
- eFusePhysicalWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
- }
- }
-}
-
-/*
-========================================================================
-
- Routine Description:
-
- Arguments:
-
- Return Value:
-
- Note:
-
-========================================================================
-*/
INT set_eFuseGetFreeBlockCount_Proc(
IN PRTMP_ADAPTER pAd,
IN PSTRING arg)
@@ -492,442 +319,12 @@ USHORT InBuf[3];
return TRUE;
}
-
-INT set_eFuseLoadFromBin_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- PSTRING src;
- RTMP_OS_FD srcf;
- RTMP_OS_FS_INFO osfsInfo;
- INT retval, memSize;
- PSTRING buffer, memPtr;
- INT i = 0,j=0,k=1;
- USHORT *PDATA;
- USHORT DATA;
-
- memSize = 128 + MAX_EEPROM_BIN_FILE_SIZE + sizeof(USHORT) * 8;
- memPtr = kmalloc(memSize, MEM_ALLOC_FLAG);
- if (memPtr == NULL)
- return FALSE;
-
- NdisZeroMemory(memPtr, memSize);
- src = memPtr; // kmalloc(128, MEM_ALLOC_FLAG);
- buffer = src + 128; // kmalloc(MAX_EEPROM_BIN_FILE_SIZE, MEM_ALLOC_FLAG);
- PDATA = (USHORT*)(buffer + MAX_EEPROM_BIN_FILE_SIZE); // kmalloc(sizeof(USHORT)*8,MEM_ALLOC_FLAG);
-
- if(strlen(arg)>0)
- NdisMoveMemory(src, arg, strlen(arg));
- else
- NdisMoveMemory(src, EFUSE_EEPROM_DEFULT_FILE, strlen(EFUSE_EEPROM_DEFULT_FILE));
- DBGPRINT(RT_DEBUG_TRACE, ("FileName=%s\n",src));
-
- RtmpOSFSInfoChange(&osfsInfo, TRUE);
-
- srcf = RtmpOSFileOpen(src, O_RDONLY, 0);
- if (IS_FILE_OPEN_ERR(srcf))
- {
- DBGPRINT(RT_DEBUG_ERROR, ("--> Error opening file %s\n", src));
- retval = FALSE;
- goto recoverFS;
- }
- else
- {
- // The object must have a read method
- while(RtmpOSFileRead(srcf, &buffer[i], 1)==1)
- {
- i++;
- if(i>MAX_EEPROM_BIN_FILE_SIZE)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("--> Error reading file %s, file size too large[>%d]\n", src, MAX_EEPROM_BIN_FILE_SIZE));
- retval = FALSE;
- goto closeFile;
- }
- }
-
- retval = RtmpOSFileClose(srcf);
- if (retval)
- DBGPRINT(RT_DEBUG_TRACE, ("--> Error closing file %s\n", src));
- }
-
-
- RtmpOSFSInfoChange(&osfsInfo, FALSE);
-
- for(j=0;j<i;j++)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[j]&0xff));
- if((j+1)%2==0)
- PDATA[j/2%8]=((buffer[j]<<8)&0xff00)|(buffer[j-1]&0xff);
- if(j%16==0)
- {
- k=buffer[j];
- }
- else
- {
- k&=buffer[j];
- if((j+1)%16==0)
- {
- DBGPRINT(RT_DEBUG_TRACE, (" result=%02X,blk=%02x\n",k,j/16));
- if(k!=0xff)
- eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
- else
- {
- if(eFuseReadRegisters(pAd,j, 2,(PUSHORT)&DATA)!=0x3f)
- eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
- }
- /*
- for(l=0;l<8;l++)
- printk("%04x ",PDATA[l]);
- printk("\n");
- */
- NdisZeroMemory(PDATA,16);
- }
- }
- }
-
- return TRUE;
-
-closeFile:
- if (srcf)
- RtmpOSFileClose(srcf);
-
-recoverFS:
- RtmpOSFSInfoChange(&osfsInfo, FALSE);
-
-
- if (memPtr)
- kfree(memPtr);
-
- return retval;
-}
-
-
-static NTSTATUS eFuseWriteRegistersFromBin(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- IN USHORT* pData)
-{
- USHORT i;
- USHORT eFuseData;
- USHORT LogicalAddress, BlkNum = 0xffff;
- UCHAR EFSROM_AOUT,Loop=0;
- EFUSE_CTRL_STRUC eFuseCtrlStruc;
- USHORT efuseDataOffset;
- UINT32 data,tempbuffer;
- USHORT addr,tmpaddr, InBuf[3], tmpOffset;
- UINT32 buffer[4];
- BOOLEAN bWriteSuccess = TRUE;
- BOOLEAN bNotWrite=TRUE;
- BOOLEAN bAllocateNewBlk=TRUE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin Offset=%x, pData=%04x:%04x:%04x:%04x\n", Offset, *pData,*(pData+1),*(pData+2),*(pData+3)));
-
- do
- {
- //Step 0. find the entry in the mapping table
- //The address of EEPROM is 2-bytes alignment.
- //The last bit is used for alignment, so it must be 0.
- Loop++;
- tmpOffset = Offset & 0xfffe;
- EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
-
- if( EFSROM_AOUT == 0x3f)
- { //find available logical address pointer
- //the logical address does not exist, find an empty one
- //from the first address of block 45=16*45=0x2d0 to the last address of block 47
- //==>48*16-3(reserved)=2FC
- bAllocateNewBlk=TRUE;
- for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
- {
- //Retrive the logical block nubmer form each logical address pointer
- //It will access two logical address pointer each time.
- eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
- if( (LogicalAddress & 0xff) == 0)
- {//Not used logical address pointer
- BlkNum = i-EFUSE_USAGE_MAP_START;
- break;
- }
- else if(( (LogicalAddress >> 8) & 0xff) == 0)
- {//Not used logical address pointer
- if (i != EFUSE_USAGE_MAP_END)
- {
- BlkNum = i-EFUSE_USAGE_MAP_START+1;
- }
- break;
- }
- }
- }
- else
- {
- bAllocateNewBlk=FALSE;
- BlkNum = EFSROM_AOUT;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
-
- if(BlkNum == 0xffff)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
- return FALSE;
- }
- //Step 1.1.0
- //If the block is not existing in mapping table, create one
- //and write down the 16-bytes data to the new block
- if(bAllocateNewBlk)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk\n"));
- efuseDataOffset = EFUSE_DATA3;
- for(i=0; i< 4; i++)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk, Data%d=%04x%04x\n",3-i,pData[2*i+1],pData[2*i]));
- tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
-
-
- RTMP_IO_WRITE32(pAd, efuseDataOffset,tempbuffer);
- efuseDataOffset -= 4;
-
- }
- /////////////////////////////////////////////////////////////////
-
- //Step1.1.1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
- RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
- eFuseCtrlStruc.field.EFSROM_AIN = BlkNum* 0x10 ;
-
- //Step1.1.2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
- eFuseCtrlStruc.field.EFSROM_MODE = 3;
-
- //Step1.1.3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
- eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
- NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
-
- RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
- //Step1.1.4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It¡¦s done.
- i = 0;
- while(i < 100)
- {
- RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
- if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
- break;
-
- RTMPusecDelay(2);
- i++;
- }
-
- }
- else
- { //Step1.2.
- //If the same logical number is existing, check if the writting data and the data
- //saving in this block are the same.
- /////////////////////////////////////////////////////////////////
- //read current values of 16-byte block
- RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrlStruc.word);
-
- //Step1.2.0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
- eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
-
- //Step1.2.1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
- eFuseCtrlStruc.field.EFSROM_MODE = 0;
-
- //Step1.2.2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
- eFuseCtrlStruc.field.EFSROM_KICK = 1;
-
- NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
- RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
-
- //Step1.2.3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
- i = 0;
- while(i < 500)
- {
- RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
-
- if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
- break;
- RTMPusecDelay(2);
- i++;
- }
-
- //Step1.2.4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
- efuseDataOffset = EFUSE_DATA3;
- for(i=0; i< 4; i++)
- {
- RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &buffer[i]);
- efuseDataOffset -= 4;
- }
- //Step1.2.5. Check if the data of efuse and the writing data are the same.
- for(i =0; i<4; i++)
- {
- tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
- DBGPRINT(RT_DEBUG_TRACE, ("buffer[%d]=%x,pData[%d]=%x,pData[%d]=%x,tempbuffer=%x\n",i,buffer[i],2*i,pData[2*i],2*i+1,pData[2*i+1],tempbuffer));
-
- if(((buffer[i]&0xffff0000)==(pData[2*i+1]<<16))&&((buffer[i]&0xffff)==pData[2*i]))
- bNotWrite&=TRUE;
- else
- {
- bNotWrite&=FALSE;
- break;
- }
- }
- if(!bNotWrite)
- {
- printk("The data is not the same\n");
-
- for(i =0; i<8; i++)
- {
- addr = BlkNum * 0x10 ;
-
- InBuf[0] = addr+2*i;
- InBuf[1] = 2;
- InBuf[2] = pData[i];
-
- eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
- }
-
- }
- else
- return TRUE;
- }
-
-
-
- //Step 2. Write mapping table
- addr = EFUSE_USAGE_MAP_START+BlkNum;
-
- tmpaddr = addr;
-
- if(addr % 2 != 0)
- addr = addr -1;
- InBuf[0] = addr;
- InBuf[1] = 2;
-
- //convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
- tmpOffset = Offset;
- tmpOffset >>= 4;
- tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^ (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
- tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
-
- // write the logical address
- if(tmpaddr%2 != 0)
- InBuf[2] = tmpOffset<<8;
- else
- InBuf[2] = tmpOffset;
-
- eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
-
- //Step 3. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
- bWriteSuccess = TRUE;
- for(i =0; i<8; i++)
- {
- addr = BlkNum * 0x10 ;
-
- InBuf[0] = addr+2*i;
- InBuf[1] = 2;
- InBuf[2] = 0x0;
-
- eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
- DBGPRINT(RT_DEBUG_TRACE, ("addr=%x, buffer[i]=%x,InBuf[2]=%x\n",InBuf[0],pData[i],InBuf[2]));
- if(pData[i] != InBuf[2])
- {
- bWriteSuccess = FALSE;
- break;
- }
- }
-
- //Step 4. invlidate mapping entry and find a free mapping entry if not succeed
-
- if (!bWriteSuccess&&Loop<2)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess BlkNum = %d\n", BlkNum));
-
- // the offset of current mapping entry
- addr = EFUSE_USAGE_MAP_START+BlkNum;
-
- //find a new mapping entry
- BlkNum = 0xffff;
- for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
- {
- eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
- if( (LogicalAddress & 0xff) == 0)
- {
- BlkNum = i-EFUSE_USAGE_MAP_START;
- break;
- }
- else if(( (LogicalAddress >> 8) & 0xff) == 0)
- {
- if (i != EFUSE_USAGE_MAP_END)
- {
- BlkNum = i+1-EFUSE_USAGE_MAP_START;
- }
- break;
- }
- }
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess new BlkNum = %d\n", BlkNum));
- if(BlkNum == 0xffff)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin: out of free E-fuse space!!!\n"));
- return FALSE;
- }
-
- //invalidate the original mapping entry if new entry is not found
- tmpaddr = addr;
-
- if(addr % 2 != 0)
- addr = addr -1;
- InBuf[0] = addr;
- InBuf[1] = 2;
-
- eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
-
- // write the logical address
- if(tmpaddr%2 != 0)
- {
- // Invalidate the high byte
- for (i=8; i<15; i++)
- {
- if( ( (InBuf[2] >> i) & 0x01) == 0)
- {
- InBuf[2] |= (0x1 <<i);
- break;
- }
- }
- }
- else
- {
- // invalidate the low byte
- for (i=0; i<8; i++)
- {
- if( ( (InBuf[2] >> i) & 0x01) == 0)
- {
- InBuf[2] |= (0x1 <<i);
- break;
- }
- }
- }
- eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
- }
-
- }
- while(!bWriteSuccess&&Loop<2);
-
- return TRUE;
-}
-
-
int rtmp_ee_efuse_read16(
IN RTMP_ADAPTER *pAd,
IN USHORT Offset,
OUT USHORT *pValue)
{
- if(pAd->bFroceEEPROMBuffer || pAd->bEEPROMFile)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Read from EEPROM Buffer\n"));
- NdisMoveMemory(pValue, &(pAd->EEPROMImage[Offset]), 2);
- }
- else
- eFuseReadRegisters(pAd, Offset, 2, pValue);
+ eFuseReadRegisters(pAd, Offset, 2, pValue);
return (*pValue);
}
@@ -944,177 +341,6 @@ int RtmpEfuseSupportCheck(
return 0;
}
-INT set_eFuseBufferModeWriteBack_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg)
-{
- UINT Enable;
-
-
- if(strlen(arg)>0)
- {
- Enable= simple_strtol(arg, 0, 16);
- }
- else
- return FALSE;
- if(Enable==1)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("set_eFuseBufferMode_Proc:: Call WRITEEEPROMBUF"));
- eFuseWriteEeeppromBuf(pAd);
- }
- else
- return FALSE;
- return TRUE;
-}
-
-
-/*
- ========================================================================
-
- Routine Description:
- Load EEPROM from bin file for eFuse mode
-
- Arguments:
- Adapter Pointer to our adapter
-
- Return Value:
- NDIS_STATUS_SUCCESS firmware image load ok
- NDIS_STATUS_FAILURE image not found
-
- IRQL = PASSIVE_LEVEL
-
- ========================================================================
-*/
-INT eFuseLoadEEPROM(
- IN PRTMP_ADAPTER pAd)
-{
- PSTRING src = NULL;
- INT retval;
- RTMP_OS_FD srcf;
- RTMP_OS_FS_INFO osFSInfo;
-
-
- src=EFUSE_BUFFER_PATH;
- DBGPRINT(RT_DEBUG_TRACE, ("FileName=%s\n",src));
-
-
- RtmpOSFSInfoChange(&osFSInfo, TRUE);
-
- if (src && *src)
- {
- srcf = RtmpOSFileOpen(src, O_RDONLY, 0);
- if (IS_FILE_OPEN_ERR(srcf))
- {
- DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src));
- return FALSE;
- }
- else
- {
-
- memset(pAd->EEPROMImage, 0x00, MAX_EEPROM_BIN_FILE_SIZE);
-
-
- retval =RtmpOSFileRead(srcf, (PSTRING)pAd->EEPROMImage, MAX_EEPROM_BIN_FILE_SIZE);
- if (retval > 0)
- {
- RTMPSetProfileParameters(pAd, (PSTRING)pAd->EEPROMImage);
- retval = NDIS_STATUS_SUCCESS;
- }
- else
- DBGPRINT(RT_DEBUG_ERROR, ("Read file \"%s\" failed(errCode=%d)!\n", src, retval));
-
- }
-
-
- }
- else
- {
- DBGPRINT(RT_DEBUG_ERROR, ("--> Error src or srcf is null\n"));
- return FALSE;
-
- }
-
- retval=RtmpOSFileClose(srcf);
-
- if (retval)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src));
- }
-
-
- RtmpOSFSInfoChange(&osFSInfo, FALSE);
-
- return TRUE;
-}
-
-INT eFuseWriteEeeppromBuf(
- IN PRTMP_ADAPTER pAd)
-{
-
- PSTRING src = NULL;
- INT retval;
- RTMP_OS_FD srcf;
- RTMP_OS_FS_INFO osFSInfo;
-
-
- src=EFUSE_BUFFER_PATH;
- DBGPRINT(RT_DEBUG_TRACE, ("FileName=%s\n",src));
-
- RtmpOSFSInfoChange(&osFSInfo, TRUE);
-
-
-
- if (src && *src)
- {
- srcf = RtmpOSFileOpen(src, O_WRONLY|O_CREAT, 0);
-
- if (IS_FILE_OPEN_ERR(srcf))
- {
- DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src));
- return FALSE;
- }
- else
- {
-/*
- // The object must have a read method
- if (srcf->f_op && srcf->f_op->write)
- {
- // The object must have a read method
- srcf->f_op->write(srcf, pAd->EEPROMImage, 1024, &srcf->f_pos);
-
- }
- else
- {
- DBGPRINT(RT_DEBUG_ERROR, ("--> Error!! System doest not support read function\n"));
- return FALSE;
- }
-*/
-
- RtmpOSFileWrite(srcf, (PSTRING)pAd->EEPROMImage,MAX_EEPROM_BIN_FILE_SIZE);
-
- }
-
-
- }
- else
- {
- DBGPRINT(RT_DEBUG_ERROR, ("--> Error src or srcf is null\n"));
- return FALSE;
-
- }
-
- retval=RtmpOSFileClose(srcf);
-
- if (retval)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src));
- }
-
- RtmpOSFSInfoChange(&osFSInfo, FALSE);
- return TRUE;
-}
-
-
VOID eFuseGetFreeBlockCount(IN PRTMP_ADAPTER pAd,
PUINT EfuseFreeBlock)
{
@@ -1151,18 +377,6 @@ INT eFuse_init(
UINT EfuseFreeBlock=0;
DBGPRINT(RT_DEBUG_ERROR, ("NVM is Efuse and its size =%x[%x-%x] \n",EFUSE_USAGE_MAP_SIZE,EFUSE_USAGE_MAP_START,EFUSE_USAGE_MAP_END));
eFuseGetFreeBlockCount(pAd, &EfuseFreeBlock);
- //If the used block of efuse is less than 5. We assume the default value
- // of this efuse is empty and change to the buffer mode in odrder to
- //bring up interfaces successfully.
- if(EfuseFreeBlock > (EFUSE_USAGE_MAP_END-5))
- {
- DBGPRINT(RT_DEBUG_ERROR, ("NVM is Efuse and the information is too less to bring up interface. Force to use EEPROM Buffer Mode\n"));
- pAd->bFroceEEPROMBuffer = TRUE;
- eFuseLoadEEPROM(pAd);
- }
- else
- pAd->bFroceEEPROMBuffer = FALSE;
- DBGPRINT(RT_DEBUG_TRACE, ("NVM is Efuse and force to use EEPROM Buffer Mode=%x\n",pAd->bFroceEEPROMBuffer));
return 0;
}
Index: b/drivers/staging/rt2860/common/eeprom.c
===================================================================
--- a/drivers/staging/rt2860/common/eeprom.c
+++ b/drivers/staging/rt2860/common/eeprom.c
@@ -69,10 +69,7 @@ INT RtmpChipOpsEepromHook(
return 0 ;
}
else
- {
- pAd->bFroceEEPROMBuffer = FALSE;
DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n"));
- }
#endif // RTMP_EFUSE_SUPPORT //
#endif // RT30xx //
Index: b/drivers/staging/rt2860/common/rtmp_init.c
===================================================================
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -694,15 +694,6 @@ VOID NICReadEEPROMParameters(
if (pAd->chipOps.eeinit)
pAd->chipOps.eeinit(pAd);
-#ifdef RTMP_EFUSE_SUPPORT
-#ifdef RT30xx
- if(!pAd->bFroceEEPROMBuffer && pAd->bEEPROMFile)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("--> NICReadEEPROMParameters::(Efuse)Load to EEPROM Buffer Mode\n"));
- eFuseLoadEEPROM(pAd);
- }
-#endif // RT30xx //
-#endif // RTMP_EFUSE_SUPPORT //
// Init EEPROM Address Number, before access EEPROM; if 93c46, EEPROMAddressNum=6, else if 93c66, EEPROMAddressNum=8
RTMP_IO_READ32(pAd, E2PROM_CSR, &data);
Index: b/drivers/staging/rt2860/rt_linux.c
===================================================================
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -1065,26 +1065,6 @@ int RtmpOSFileWrite(RTMP_OS_FD osfd, cha
return osfd->f_op->write(osfd, pDataPtr, (size_t)writeLen, &osfd->f_pos);
}
-
-void RtmpOSFSInfoChange(RTMP_OS_FS_INFO *pOSFSInfo, BOOLEAN bSet)
-{
- if (bSet)
- {
- // Save uid and gid used for filesystem access.
- // Set user and group to 0 (root)
- pOSFSInfo->fsuid = current_fsuid();
- pOSFSInfo->fsgid = current_fsgid();
- pOSFSInfo->fs = get_fs();
- set_fs(KERNEL_DS);
- }
- else
- {
- set_fs(pOSFSInfo->fs);
- }
-}
-
-
-
/*******************************************************************************
Task create/management/kill related functions.
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -2258,8 +2258,6 @@ struct _RTMP_ADAPTER
#ifdef RT30xx
#ifdef RTMP_EFUSE_SUPPORT
BOOLEAN bUseEfuse;
- BOOLEAN bEEPROMFile;
- BOOLEAN bFroceEEPROMBuffer;
UCHAR EEPROMImage[1024];
#endif // RTMP_EFUSE_SUPPORT //
#endif // RT30xx //
@@ -4021,10 +4019,6 @@ INT set_eFusedump_Proc(
IN PRTMP_ADAPTER pAd,
IN PSTRING arg);
-INT set_eFuseLoadFromBin_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
VOID eFusePhysicalReadRegisters(
IN PRTMP_ADAPTER pAd,
IN USHORT Offset,
@@ -4034,16 +4028,6 @@ VOID eFusePhysicalReadRegisters(
int RtmpEfuseSupportCheck(
IN RTMP_ADAPTER *pAd);
-INT set_eFuseBufferModeWriteBack_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING arg);
-
-INT eFuseLoadEEPROM(
- IN PRTMP_ADAPTER pAd);
-
-INT eFuseWriteEeeppromBuf(
- IN PRTMP_ADAPTER pAd);
-
VOID eFuseGetFreeBlockCount(IN PRTMP_ADAPTER pAd,
PUINT EfuseFreeBlock);
@@ -5632,10 +5616,5 @@ int RtmpOSFileWrite(
IN char *pDataPtr,
IN int writeLen);
-void RtmpOSFSInfoChange(
- IN RTMP_OS_FS_INFO *pOSFSInfo,
- IN BOOLEAN bSet);
-
-
#endif // __RTMP_H__
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 08/12] Staging: rt28x0: fix some build warnings
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
` (6 preceding siblings ...)
2009-10-21 20:44 ` [PATCH 07/12] Staging: rt28x0: remove optional loading of EEPROM from file in eFuse mode Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:44 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 09/12] Staging: rt28x0: remove optional cmm profile parameters Bartlomiej Zolnierkiewicz
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: fix some build warnings
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/chip/rtmp_phy.h | 8 +++---
drivers/staging/rt2860/chips/rt30xx.c | 2 +
drivers/staging/rt2860/common/cmm_asic.c | 6 ++--
drivers/staging/rt2860/common/cmm_mac_pci.c | 7 ++---
drivers/staging/rt2860/common/mlme.c | 1
drivers/staging/rt2860/common/rtmp_init.c | 3 +-
drivers/staging/rt2860/common/rtmp_mcu.c | 2 +
drivers/staging/rt2860/pci_main_dev.c | 35 +++++++++++++++++-----------
drivers/staging/rt2860/rt_linux.c | 10 +++-----
drivers/staging/rt2860/rt_main_dev.c | 6 +---
drivers/staging/rt2860/sta/connect.c | 1
drivers/staging/rt2860/usb_main_dev.c | 7 +++--
12 files changed, 48 insertions(+), 40 deletions(-)
Index: b/drivers/staging/rt2860/chip/rtmp_phy.h
===================================================================
--- a/drivers/staging/rt2860/chip/rtmp_phy.h
+++ b/drivers/staging/rt2860/chip/rtmp_phy.h
@@ -552,8 +552,8 @@
#ifdef RT30xx
#define RTMP_ASIC_MMPS_DISABLE(_pAd) \
do{ \
- UCHAR _bbpData; \
- UINT32 _macData; \
+ UINT32 _macData; \
+ UCHAR _bbpData = 0; \
/* disable MMPS BBP control register */ \
RTMP_BBP_IO_READ8_BY_REG_ID(_pAd, BBP_R3, &_bbpData); \
_bbpData &= ~(0x04); /*bit 2*/ \
@@ -568,8 +568,8 @@
#define RTMP_ASIC_MMPS_ENABLE(_pAd) \
do{ \
- UCHAR _bbpData; \
- UINT32 _macData; \
+ UINT32 _macData; \
+ UCHAR _bbpData = 0; \
/* enable MMPS BBP control register */ \
RTMP_BBP_IO_READ8_BY_REG_ID(_pAd, BBP_R3, &_bbpData); \
_bbpData |= (0x04); /*bit 2*/ \
Index: b/drivers/staging/rt2860/chips/rt30xx.c
===================================================================
--- a/drivers/staging/rt2860/chips/rt30xx.c
+++ b/drivers/staging/rt2860/chips/rt30xx.c
@@ -86,7 +86,9 @@ VOID RT30xxSetRxAnt(
IN UCHAR Ant)
{
UINT32 Value;
+#ifdef RTMP_MAC_PCI
UINT32 x;
+#endif
if ((pAd->EepromAccess) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
Index: b/drivers/staging/rt2860/common/cmm_asic.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_asic.c
+++ b/drivers/staging/rt2860/common/cmm_asic.c
@@ -810,9 +810,9 @@ VOID AsicSwitchChannel(
#if defined(RT3090) || defined(RT3390)
// PCIe PHY Transmit attenuation adjustment
- if (IS_RT3090A(pAd) || IS_RT3390(pAd))
- {
- TX_ATTENUATION_CTRL_STRUC TxAttenuationCtrl = {0};
+ if (IS_RT3090A(pAd) || IS_RT3390(pAd)) {
+ TX_ATTENUATION_CTRL_STRUC
+ TxAttenuationCtrl = { .word = 0 };
RTMP_IO_READ32(pAd, PCIE_PHY_TX_ATTENUATION_CTRL, &TxAttenuationCtrl.word);
Index: b/drivers/staging/rt2860/common/cmm_mac_pci.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_mac_pci.c
+++ b/drivers/staging/rt2860/common/cmm_mac_pci.c
@@ -1173,10 +1173,9 @@ BOOLEAN RT28xxPciAsicRadioOn(
pAd->Mlme.bPsPollTimerRunning = FALSE;
RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
}
- if ((pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)&&
- ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE))
- ||(RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)))
- {
+ if ((pAd->StaCfg.PSControl.field.EnableNewPS == TRUE &&
+ (Level == GUIRADIO_OFF || Level == GUI_IDLE_POWER_SAVE)) ||
+ RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) {
// Some chips don't need to delay 6ms, so copy RTMPPCIePowerLinkCtrlRestore
// return condition here.
/*
Index: b/drivers/staging/rt2860/common/mlme.c
===================================================================
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -679,7 +679,6 @@ VOID MlmePeriodicExec(
{
ULONG TxTotalCnt;
PRTMP_ADAPTER pAd = (RTMP_ADAPTER *)FunctionContext;
- SHORT realavgrssi;
#ifdef RTMP_MAC_PCI
{
Index: b/drivers/staging/rt2860/common/rtmp_init.c
===================================================================
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -3621,7 +3621,8 @@ INT RtmpRaDevCtrlInit(
#ifdef RTMP_MAC_USB
init_MUTEX(&(pAd->UsbVendorReq_semaphore));
- os_alloc_mem(pAd, (PUCHAR)&pAd->UsbVendorReqBuf, MAX_PARAM_BUFFER_SIZE - 1);
+ os_alloc_mem(pAd, (PUCHAR *)&pAd->UsbVendorReqBuf,
+ MAX_PARAM_BUFFER_SIZE - 1);
if (pAd->UsbVendorReqBuf == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("Allocate vendor request temp buffer failed!\n"));
Index: b/drivers/staging/rt2860/common/rtmp_mcu.c
===================================================================
--- a/drivers/staging/rt2860/common/rtmp_mcu.c
+++ b/drivers/staging/rt2860/common/rtmp_mcu.c
@@ -119,7 +119,9 @@ NDIS_STATUS RtmpAsicLoadFirmware(
PUCHAR pFirmwareImage = NULL;
ULONG FileLength, Index;
UINT32 MacReg = 0;
+#ifdef RTMP_MAC_USB
UINT32 Version = (pAd->MACVersion >> 16);
+#endif
// New 8k byte firmware size for RT3071/RT3072
{
Index: b/drivers/staging/rt2860/pci_main_dev.c
===================================================================
--- a/drivers/staging/rt2860/pci_main_dev.c
+++ b/drivers/staging/rt2860/pci_main_dev.c
@@ -310,7 +310,7 @@ static INT __devinit rt2860_probe(
return rv;
}
- print_name = pci_name(pci_dev);
+ print_name = (PSTRING)pci_name(pci_dev);
if ((rv = pci_request_regions(pci_dev, print_name)) != 0)
{
@@ -883,7 +883,7 @@ VOID RTMPPCIeLinkCtrlValueRestore(
#endif // RT2860 //
// Check PSControl Configuration
if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
- return TRUE;
+ return;
//3090 will not execute the following codes.
// Check interface : If not PCIe interface, return.
@@ -977,7 +977,7 @@ VOID RTMPPCIeLinkCtrlSetting(
#endif // RT2860 //
// Check PSControl Configuration
if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
- return TRUE;
+ return;
// Check interface : If not PCIe interface, return.
//Block 3090 to enter the following function
@@ -1086,17 +1086,17 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
IN PRTMP_ADAPTER pAd)
{
- ULONG HostConfiguration;
+ ULONG HostConfiguration = 0;
ULONG Configuration;
- ULONG Vendor;
- ULONG offset;
POS_COOKIE pObj;
INT pos;
USHORT reg16;
pObj = (POS_COOKIE) pAd->OS_Cookie;
- DBGPRINT(RT_DEBUG_INFO, ("RTMPrt3xSetPCIePowerLinkCtrl.===> %x\n", pAd->StaCfg.PSControl.word));
+ DBGPRINT(RT_DEBUG_INFO,
+ ("RTMPrt3xSetPCIePowerLinkCtrl.===> %lx\n",
+ pAd->StaCfg.PSControl.word));
// Check PSControl Configuration
if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
@@ -1104,7 +1104,6 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
RTMPFindHostPCIDev(pAd);
if (pObj->parent_pci_dev)
{
- USHORT vendor_id;
// Find PCI-to-PCI Bridge Express Capability Offset
pos = pci_find_capability(pObj->parent_pci_dev, PCI_CAP_ID_EXP);
@@ -1129,7 +1128,10 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
// Because in rt30xxForceASPMTest Mode, Force turn on L0s, L1.
// Fix HostConfiguration bit0:1 = 0x3 for later use.
HostConfiguration = 0x3;
- DBGPRINT(RT_DEBUG_TRACE, ("PSM : Force ASPM : Host device L1/L0s Value = 0x%x\n", HostConfiguration));
+ DBGPRINT(RT_DEBUG_TRACE,
+ ("PSM : Force ASPM : "
+ "Host device L1/L0s Value = 0x%lx\n",
+ HostConfiguration));
}
}
else if (pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM == 1)
@@ -1141,7 +1143,10 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
PCI_REG_READ_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, HostConfiguration);
pAd->Rt3xxHostLinkCtrl = HostConfiguration;
HostConfiguration &= 0x3;
- DBGPRINT(RT_DEBUG_TRACE, ("PSM : Follow Host ASPM : Host device L1/L0s Value = 0x%x\n", HostConfiguration));
+ DBGPRINT(RT_DEBUG_TRACE,
+ ("PSM : Follow Host ASPM : "
+ "Host device L1/L0s Value = 0x%lx\n",
+ HostConfiguration));
}
}
}
@@ -1155,8 +1160,10 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
pAd->RLnkCtrlOffset = pos + PCI_EXP_LNKCTL;
pci_read_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset, ®16);
Configuration = le2cpu16(reg16);
- DBGPRINT(RT_DEBUG_TRACE, ("Read (Ralink PCIe Link Control Register) offset 0x%x = 0x%x\n",
- pAd->RLnkCtrlOffset, Configuration));
+ DBGPRINT(RT_DEBUG_TRACE,
+ ("Read (Ralink PCIe Link Control Register) "
+ "offset 0x%x = 0x%lx\n",
+ pAd->RLnkCtrlOffset, Configuration));
Configuration |= 0x100;
if ((pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM == 1)
|| (pAd->StaCfg.PSControl.field.rt30xxForceASPMTest == 1))
@@ -1182,7 +1189,9 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(
reg16 = cpu2le16(Configuration);
pci_write_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset, reg16);
pAd->Rt3xxRalinkLinkCtrl = Configuration;
- DBGPRINT(RT_DEBUG_TRACE, ("PSM :Write Ralink device L1/L0s Value = 0x%x\n", Configuration));
+ DBGPRINT(RT_DEBUG_TRACE,
+ ("PSM :Write Ralink device L1/L0s Value = 0x%lx\n",
+ Configuration));
}
DBGPRINT(RT_DEBUG_INFO,("PSM :RTMPrt3xSetPCIePowerLinkCtrl <==============\n"));
}
Index: b/drivers/staging/rt2860/rt_linux.c
===================================================================
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -965,6 +965,7 @@ err_free_sk_buff:
*******************************************************************************/
int RtmpOSIRQRequest(IN PNET_DEV pNetDev)
{
+#ifdef RTMP_PCI_SUPPORT
struct net_device *net_dev = pNetDev;
PRTMP_ADAPTER pAd = NULL;
int retval = 0;
@@ -973,7 +974,6 @@ int RtmpOSIRQRequest(IN PNET_DEV pNetDev
ASSERT(pAd);
-#ifdef RTMP_PCI_SUPPORT
if (pAd->infType == RTMP_DEV_INF_PCI)
{
POS_COOKIE _pObj = (POS_COOKIE)(pAd->OS_Cookie);
@@ -982,14 +982,13 @@ int RtmpOSIRQRequest(IN PNET_DEV pNetDev
if (retval != 0)
printk("RT2860: request_irq ERROR(%d)\n", retval);
}
-#endif // RTMP_PCI_SUPPORT //
-
return retval;
-
+#else
+ return 0;
+#endif
}
-
int RtmpOSIRQRelease(IN PNET_DEV pNetDev)
{
struct net_device *net_dev = pNetDev;
@@ -1149,7 +1148,6 @@ NDIS_STATUS RtmpOSTaskAttach(
IN void *arg)
{
NDIS_STATUS status = NDIS_STATUS_SUCCESS;
- pid_t pid_number = -1;
#ifdef KTHREAD_SUPPORT
pTask->task_killed = 0;
Index: b/drivers/staging/rt2860/rt_main_dev.c
===================================================================
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -209,15 +209,13 @@ int rt28xx_close(IN PNET_DEV dev)
BOOLEAN Cancelled;
UINT32 i = 0;
- GET_PAD_FROM_NET_DEV(pAd, net_dev);
-
#ifdef RTMP_MAC_USB
DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
DECLARE_WAITQUEUE(wait, current);
-
- //RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
#endif // RTMP_MAC_USB //
+ GET_PAD_FROM_NET_DEV(pAd, net_dev);
+
DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
Cancelled = FALSE;
Index: b/drivers/staging/rt2860/sta/connect.c
===================================================================
--- a/drivers/staging/rt2860/sta/connect.c
+++ b/drivers/staging/rt2860/sta/connect.c
@@ -1809,7 +1809,6 @@ VOID LinkDown(
IN BOOLEAN IsReqFromAP)
{
UCHAR i, ByteValue = 0;
- BOOLEAN Cancelled;
// Do nothing if monitor mode is on
if (MONITOR_ON(pAd))
Index: b/drivers/staging/rt2860/usb_main_dev.c
===================================================================
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -686,9 +686,10 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER *pAd)
RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[idx], irqFlags);
-
- printk("%d:%d LTL=%d , TL=%d L:%d\n",idx,pAd->watchDogTxPendingCnt[idx],pAd->TransferedLength[idx]
- ,actual_length,transfer_buffer_length);
+ printk(KERN_INFO "%d:%lu LTL=%d , TL=%d L:%d\n",
+ idx, pAd->watchDogTxPendingCnt[idx],
+ pAd->TransferedLength[idx],
+ actual_length, transfer_buffer_length);
if (pUrb)
{
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 09/12] Staging: rt28x0: remove optional cmm profile parameters
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
` (7 preceding siblings ...)
2009-10-21 20:44 ` [PATCH 08/12] Staging: rt28x0: fix some build warnings Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:44 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 10/12] Staging: rt28x0: remove dead code from rtmp_phy.h Bartlomiej Zolnierkiewicz
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove optional cmm profile parameters
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/Makefile | 1
drivers/staging/rt2860/common/cmm_profile.c | 1769 ----------------------------
drivers/staging/rt2860/rtmp.h | 34
drivers/staging/rt2870/Makefile | 1
4 files changed, 1805 deletions(-)
Index: b/drivers/staging/rt2860/Makefile
===================================================================
--- a/drivers/staging/rt2860/Makefile
+++ b/drivers/staging/rt2860/Makefile
@@ -27,7 +27,6 @@ rt2860sta-objs := \
common/spectrum.o \
common/rtmp_timer.o \
common/rt_channel.o \
- common/cmm_profile.o \
common/cmm_asic.o \
sta/assoc.o \
sta/auth.o \
Index: b/drivers/staging/rt2860/common/cmm_profile.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_profile.c
+++ /dev/null
@@ -1,1769 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-*/
-
-#include "../rt_config.h"
-
-
-#define ETH_MAC_ADDR_STR_LEN 17 // in format of xx:xx:xx:xx:xx:xx
-
-// We assume the s1 is a sting, s2 is a memory space with 6 bytes. and content of s1 will be changed.
-BOOLEAN rtstrmactohex(PSTRING s1, PSTRING s2)
-{
- int i = 0;
- PSTRING ptokS = s1, ptokE = s1;
-
- if (strlen(s1) != ETH_MAC_ADDR_STR_LEN)
- return FALSE;
-
- while((*ptokS) != '\0')
- {
- if((ptokE = strchr(ptokS, ':')) != NULL)
- *ptokE++ = '\0';
- if ((strlen(ptokS) != 2) || (!isxdigit(*ptokS)) || (!isxdigit(*(ptokS+1))))
- break; // fail
- AtoH(ptokS, (PUCHAR)&s2[i++], 1);
- ptokS = ptokE;
- if (i == 6)
- break; // parsing finished
- }
-
- return ( i == 6 ? TRUE : FALSE);
-
-}
-
-
-// we assume the s1 and s2 both are strings.
-BOOLEAN rtstrcasecmp(PSTRING s1, PSTRING s2)
-{
- PSTRING p1 = s1, p2 = s2;
-
- if (strlen(s1) != strlen(s2))
- return FALSE;
-
- while(*p1 != '\0')
- {
- if((*p1 != *p2) && ((*p1 ^ *p2) != 0x20))
- return FALSE;
- p1++;
- p2++;
- }
-
- return TRUE;
-}
-
-// we assume the s1 (buffer) and s2 (key) both are strings.
-PSTRING rtstrstruncasecmp(PSTRING s1, PSTRING s2)
-{
- INT l1, l2, i;
- char temp1, temp2;
-
- l2 = strlen(s2);
- if (!l2)
- return (char *) s1;
-
- l1 = strlen(s1);
-
- while (l1 >= l2)
- {
- l1--;
-
- for(i=0; i<l2; i++)
- {
- temp1 = *(s1+i);
- temp2 = *(s2+i);
-
- if (('a' <= temp1) && (temp1 <= 'z'))
- temp1 = 'A'+(temp1-'a');
- if (('a' <= temp2) && (temp2 <= 'z'))
- temp2 = 'A'+(temp2-'a');
-
- if (temp1 != temp2)
- break;
- }
-
- if (i == l2)
- return (char *) s1;
-
- s1++;
- }
-
- return NULL; // not found
-}
-
-//add by kathy
-
- /**
- * strstr - Find the first substring in a %NUL terminated string
- * @s1: The string to be searched
- * @s2: The string to search for
- */
-PSTRING rtstrstr(PSTRING s1,const PSTRING s2)
-{
- INT l1, l2;
-
- l2 = strlen(s2);
- if (!l2)
- return s1;
-
- l1 = strlen(s1);
-
- while (l1 >= l2)
- {
- l1--;
- if (!memcmp(s1,s2,l2))
- return s1;
- s1++;
- }
-
- return NULL;
-}
-
-/**
- * rstrtok - Split a string into tokens
- * @s: The string to be searched
- * @ct: The characters to search for
- * * WARNING: strtok is deprecated, use strsep instead. However strsep is not compatible with old architecture.
- */
-PSTRING __rstrtok;
-PSTRING rstrtok(PSTRING s,const PSTRING ct)
-{
- PSTRING sbegin, send;
-
- sbegin = s ? s : __rstrtok;
- if (!sbegin)
- {
- return NULL;
- }
-
- sbegin += strspn(sbegin,ct);
- if (*sbegin == '\0')
- {
- __rstrtok = NULL;
- return( NULL );
- }
-
- send = strpbrk( sbegin, ct);
- if (send && *send != '\0')
- *send++ = '\0';
-
- __rstrtok = send;
-
- return (sbegin);
-}
-
-/**
- * delimitcnt - return the count of a given delimiter in a given string.
- * @s: The string to be searched.
- * @ct: The delimiter to search for.
- * Notice : We suppose the delimiter is a single-char string(for example : ";").
- */
-INT delimitcnt(PSTRING s,PSTRING ct)
-{
- INT count = 0;
- /* point to the beginning of the line */
- PSTRING token = s;
-
- for ( ;; )
- {
- token = strpbrk(token, ct); /* search for delimiters */
-
- if ( token == NULL )
- {
- /* advanced to the terminating null character */
- break;
- }
- /* skip the delimiter */
- ++token;
-
- /*
- * Print the found text: use len with %.*s to specify field width.
- */
-
- /* accumulate delimiter count */
- ++count;
- }
- return count;
-}
-
-/*
- * converts the Internet host address from the standard numbers-and-dots notation
- * into binary data.
- * returns nonzero if the address is valid, zero if not.
- */
-int rtinet_aton(PSTRING cp, unsigned int *addr)
-{
- unsigned int val;
- int base, n;
- STRING c;
- unsigned int parts[4];
- unsigned int *pp = parts;
-
- for (;;)
- {
- /*
- * Collect number up to ``.''.
- * Values are specified as for C:
- * 0x=hex, 0=octal, other=decimal.
- */
- val = 0;
- base = 10;
- if (*cp == '0')
- {
- if (*++cp == 'x' || *cp == 'X')
- base = 16, cp++;
- else
- base = 8;
- }
- while ((c = *cp) != '\0')
- {
- if (isdigit((unsigned char) c))
- {
- val = (val * base) + (c - '0');
- cp++;
- continue;
- }
- if (base == 16 && isxdigit((unsigned char) c))
- {
- val = (val << 4) +
- (c + 10 - (islower((unsigned char) c) ? 'a' : 'A'));
- cp++;
- continue;
- }
- break;
- }
- if (*cp == '.')
- {
- /*
- * Internet format: a.b.c.d a.b.c (with c treated as 16-bits)
- * a.b (with b treated as 24 bits)
- */
- if (pp >= parts + 3 || val > 0xff)
- return 0;
- *pp++ = val, cp++;
- }
- else
- break;
- }
-
- /*
- * Check for trailing junk.
- */
- while (*cp)
- if (!isspace((unsigned char) *cp++))
- return 0;
-
- /*
- * Concoct the address according to the number of parts specified.
- */
- n = pp - parts + 1;
- switch (n)
- {
-
- case 1: /* a -- 32 bits */
- break;
-
- case 2: /* a.b -- 8.24 bits */
- if (val > 0xffffff)
- return 0;
- val |= parts[0] << 24;
- break;
-
- case 3: /* a.b.c -- 8.8.16 bits */
- if (val > 0xffff)
- return 0;
- val |= (parts[0] << 24) | (parts[1] << 16);
- break;
-
- case 4: /* a.b.c.d -- 8.8.8.8 bits */
- if (val > 0xff)
- return 0;
- val |= (parts[0] << 24) | (parts[1] << 16) | (parts[2] << 8);
- break;
- }
-
- *addr = htonl(val);
- return 1;
-
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Find key section for Get key parameter.
-
- Arguments:
- buffer Pointer to the buffer to start find the key section
- section the key of the secion to be find
-
- Return Value:
- NULL Fail
- Others Success
- ========================================================================
-*/
-PSTRING RTMPFindSection(
- IN PSTRING buffer)
-{
- STRING temp_buf[32];
- PSTRING ptr;
-
- strcpy(temp_buf, "Default");
-
- if((ptr = rtstrstr(buffer, temp_buf)) != NULL)
- return (ptr+strlen("\n"));
- else
- return NULL;
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Get key parameter.
-
- Arguments:
- key Pointer to key string
- dest Pointer to destination
- destsize The datasize of the destination
- buffer Pointer to the buffer to start find the key
- bTrimSpace Set true if you want to strip the space character of the result pattern
-
- Return Value:
- TRUE Success
- FALSE Fail
-
- Note:
- This routine get the value with the matched key (case case-sensitive)
- For SSID and security key related parameters, we SHALL NOT trim the space(' ') character.
- ========================================================================
-*/
-INT RTMPGetKeyParameter(
- IN PSTRING key,
- OUT PSTRING dest,
- IN INT destsize,
- IN PSTRING buffer,
- IN BOOLEAN bTrimSpace)
-{
- PSTRING pMemBuf, temp_buf1 = NULL, temp_buf2 = NULL;
- PSTRING start_ptr, end_ptr;
- PSTRING ptr;
- PSTRING offset = NULL;
- INT len, keyLen;
-
-
- keyLen = strlen(key);
- os_alloc_mem(NULL, (PUCHAR *)&pMemBuf, MAX_PARAM_BUFFER_SIZE * 2);
- if (pMemBuf == NULL)
- return (FALSE);
-
- memset(pMemBuf, 0, MAX_PARAM_BUFFER_SIZE * 2);
- temp_buf1 = pMemBuf;
- temp_buf2 = (PSTRING)(pMemBuf + MAX_PARAM_BUFFER_SIZE);
-
-
- //find section
- if((offset = RTMPFindSection(buffer)) == NULL)
- {
- os_free_mem(NULL, (PUCHAR)pMemBuf);
- return (FALSE);
- }
-
- strcpy(temp_buf1, "\n");
- strcat(temp_buf1, key);
- strcat(temp_buf1, "=");
-
- //search key
- if((start_ptr=rtstrstr(offset, temp_buf1)) == NULL)
- {
- os_free_mem(NULL, (PUCHAR)pMemBuf);
- return (FALSE);
- }
-
- start_ptr += strlen("\n");
- if((end_ptr = rtstrstr(start_ptr, "\n"))==NULL)
- end_ptr = start_ptr+strlen(start_ptr);
-
- if (end_ptr<start_ptr)
- {
- os_free_mem(NULL, (PUCHAR)pMemBuf);
- return (FALSE);
- }
-
- NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
- temp_buf2[end_ptr-start_ptr]='\0';
- if((start_ptr=rtstrstr(temp_buf2, "=")) == NULL)
- {
- os_free_mem(NULL, (PUCHAR)pMemBuf);
- return (FALSE);
- }
- ptr = (start_ptr +1);
- //trim special characters, i.e., TAB or space
- while(*start_ptr != 0x00)
- {
- if( ((*ptr == ' ') && bTrimSpace) || (*ptr == '\t') )
- ptr++;
- else
- break;
- }
- len = strlen(start_ptr);
-
- memset(dest, 0x00, destsize);
- strncpy(dest, ptr, ((len >= destsize) ? destsize: len));
-
- os_free_mem(NULL, (PUCHAR)pMemBuf);
-
- return TRUE;
-}
-
-
-/*
- ========================================================================
-
- Routine Description:
- Get multiple key parameter.
-
- Arguments:
- key Pointer to key string
- dest Pointer to destination
- destsize The datasize of the destination
- buffer Pointer to the buffer to start find the key
-
- Return Value:
- TRUE Success
- FALSE Fail
-
- Note:
- This routine get the value with the matched key (case case-sensitive)
- ========================================================================
-*/
-INT RTMPGetKeyParameterWithOffset(
- IN PSTRING key,
- OUT PSTRING dest,
- OUT USHORT *end_offset,
- IN INT destsize,
- IN PSTRING buffer,
- IN BOOLEAN bTrimSpace)
-{
- PSTRING temp_buf1 = NULL;
- PSTRING temp_buf2 = NULL;
- PSTRING start_ptr;
- PSTRING end_ptr;
- PSTRING ptr;
- PSTRING offset = 0;
- INT len;
-
- if (*end_offset >= MAX_INI_BUFFER_SIZE)
- return (FALSE);
-
- os_alloc_mem(NULL, (PUCHAR *)&temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
- if(temp_buf1 == NULL)
- return (FALSE);
-
- os_alloc_mem(NULL, (PUCHAR *)&temp_buf2, MAX_PARAM_BUFFER_SIZE);
- if(temp_buf2 == NULL)
- {
- os_free_mem(NULL, (PUCHAR)temp_buf1);
- return (FALSE);
- }
-
- //find section
- if(*end_offset == 0)
- {
- if ((offset = RTMPFindSection(buffer)) == NULL)
- {
- os_free_mem(NULL, (PUCHAR)temp_buf1);
- os_free_mem(NULL, (PUCHAR)temp_buf2);
- return (FALSE);
- }
- }
- else
- offset = buffer + (*end_offset);
-
- strcpy(temp_buf1, "\n");
- strcat(temp_buf1, key);
- strcat(temp_buf1, "=");
-
- //search key
- if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
- {
- os_free_mem(NULL, (PUCHAR)temp_buf1);
- os_free_mem(NULL, (PUCHAR)temp_buf2);
- return (FALSE);
- }
-
- start_ptr+=strlen("\n");
- if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
- end_ptr=start_ptr+strlen(start_ptr);
-
- if (end_ptr<start_ptr)
- {
- os_free_mem(NULL, (PUCHAR)temp_buf1);
- os_free_mem(NULL, (PUCHAR)temp_buf2);
- return (FALSE);
- }
-
- *end_offset = end_ptr - buffer;
-
- NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
- temp_buf2[end_ptr-start_ptr]='\0';
- len = strlen(temp_buf2);
- strcpy(temp_buf1, temp_buf2);
- if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
- {
- os_free_mem(NULL, (PUCHAR)temp_buf1);
- os_free_mem(NULL, (PUCHAR)temp_buf2);
- return (FALSE);
- }
-
- strcpy(temp_buf2, start_ptr+1);
- ptr = temp_buf2;
- //trim space or tab
- while(*ptr != 0x00)
- {
- if((bTrimSpace && (*ptr == ' ')) || (*ptr == '\t') )
- ptr++;
- else
- break;
- }
-
- len = strlen(ptr);
- memset(dest, 0x00, destsize);
- strncpy(dest, ptr, len >= destsize ? destsize: len);
-
- os_free_mem(NULL, (PUCHAR)temp_buf1);
- os_free_mem(NULL, (PUCHAR)temp_buf2);
- return TRUE;
-}
-
-
-static int rtmp_parse_key_buffer_from_file(IN PRTMP_ADAPTER pAd,IN PSTRING buffer,IN ULONG KeyType,IN INT BSSIdx,IN INT KeyIdx)
-{
- PSTRING keybuff;
- //INT i = BSSIdx, idx = KeyIdx, retVal;
- ULONG KeyLen;
- //UCHAR CipherAlg = CIPHER_WEP64;
- CIPHER_KEY *pSharedKey;
-
- keybuff = buffer;
- KeyLen = strlen(keybuff);
- pSharedKey = &pAd->SharedKey[BSSIdx][KeyIdx];
-
- if(((KeyType != 0) && (KeyType != 1)) ||
- ((KeyType == 0) && (KeyLen != 10) && (KeyLen != 26)) ||
- ((KeyType== 1) && (KeyLen != 5) && (KeyLen != 13)))
- {
- DBGPRINT(RT_DEBUG_ERROR, ("Key%dStr is Invalid key length(%ld) or Type(%ld)\n",
- KeyIdx+1, KeyLen, KeyType));
- return FALSE;
- }
- else
- {
- return RT_CfgSetWepKey(pAd, buffer, pSharedKey, KeyIdx);
- }
-
-}
-
-
-static void rtmp_read_key_parms_from_file(IN PRTMP_ADAPTER pAd, PSTRING tmpbuf, PSTRING buffer)
-{
- STRING tok_str[16];
- PSTRING macptr;
- INT i = 0, idx;
- ULONG KeyType[MAX_MBSSID_NUM];
- ULONG KeyIdx;
-
- NdisZeroMemory(KeyType, sizeof(KeyType));
-
- //DefaultKeyID
- if(RTMPGetKeyParameter("DefaultKeyID", tmpbuf, 25, buffer, TRUE))
- {
- {
- KeyIdx = simple_strtol(tmpbuf, 0, 10);
- if((KeyIdx >= 1 ) && (KeyIdx <= 4))
- pAd->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1);
- else
- pAd->StaCfg.DefaultKeyId = 0;
-
- DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyID(0~3)=%d\n", pAd->StaCfg.DefaultKeyId));
- }
- }
-
-
- for (idx = 0; idx < 4; idx++)
- {
- sprintf(tok_str, "Key%dType", idx + 1);
- //Key1Type
- if (RTMPGetKeyParameter(tok_str, tmpbuf, 128, buffer, TRUE))
- {
- for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
- {
- /*
- do sanity check for KeyType length;
- or in station mode, the KeyType length > 1,
- the code will overwrite the stack of caller
- (RTMPSetProfileParameters) and cause srcbuf = NULL
- */
- if (i < MAX_MBSSID_NUM)
- KeyType[i] = simple_strtol(macptr, 0, 10);
- }
-
- {
- sprintf(tok_str, "Key%dStr", idx + 1);
- if (RTMPGetKeyParameter(tok_str, tmpbuf, 128, buffer, FALSE))
- {
- rtmp_parse_key_buffer_from_file(pAd, tmpbuf, KeyType[BSS0], BSS0, idx);
- }
- }
- }
- }
-}
-
-
-
-static void rtmp_read_sta_wmm_parms_from_file(IN PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
-{
- PSTRING macptr;
- INT i=0;
- BOOLEAN bWmmEnable = FALSE;
-
- //WmmCapable
- if(RTMPGetKeyParameter("WmmCapable", tmpbuf, 32, buffer, TRUE))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
- {
- pAd->CommonCfg.bWmmCapable = TRUE;
- bWmmEnable = TRUE;
- }
- else //Disable
- {
- pAd->CommonCfg.bWmmCapable = FALSE;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("WmmCapable=%d\n", pAd->CommonCfg.bWmmCapable));
- }
-
-
- //AckPolicy for AC_BK, AC_BE, AC_VI, AC_VO
- if(RTMPGetKeyParameter("AckPolicy", tmpbuf, 32, buffer, TRUE))
- {
- for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
- {
- pAd->CommonCfg.AckPolicy[i] = (UCHAR)simple_strtol(macptr, 0, 10);
-
- DBGPRINT(RT_DEBUG_TRACE, ("AckPolicy[%d]=%d\n", i, pAd->CommonCfg.AckPolicy[i]));
- }
- }
-
- if (bWmmEnable)
- {
- //APSDCapable
- if(RTMPGetKeyParameter("APSDCapable", tmpbuf, 10, buffer, TRUE))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
- pAd->CommonCfg.bAPSDCapable = TRUE;
- else
- pAd->CommonCfg.bAPSDCapable = FALSE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("APSDCapable=%d\n", pAd->CommonCfg.bAPSDCapable));
- }
-
- //MaxSPLength
- if(RTMPGetKeyParameter("MaxSPLength", tmpbuf, 10, buffer, TRUE))
- {
- pAd->CommonCfg.MaxSPLength = simple_strtol(tmpbuf, 0, 10);
-
- DBGPRINT(RT_DEBUG_TRACE, ("MaxSPLength=%d\n", pAd->CommonCfg.MaxSPLength));
- }
-
- //APSDAC for AC_BE, AC_BK, AC_VI, AC_VO
- if(RTMPGetKeyParameter("APSDAC", tmpbuf, 32, buffer, TRUE))
- {
- BOOLEAN apsd_ac[4];
-
- for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
- {
- apsd_ac[i] = (BOOLEAN)simple_strtol(macptr, 0, 10);
-
- DBGPRINT(RT_DEBUG_TRACE, ("APSDAC%d %d\n", i, apsd_ac[i]));
- }
-
- pAd->CommonCfg.bAPSDAC_BE = apsd_ac[0];
- pAd->CommonCfg.bAPSDAC_BK = apsd_ac[1];
- pAd->CommonCfg.bAPSDAC_VI = apsd_ac[2];
- pAd->CommonCfg.bAPSDAC_VO = apsd_ac[3];
-
- pAd->CommonCfg.bACMAPSDTr[0] = apsd_ac[0];
- pAd->CommonCfg.bACMAPSDTr[1] = apsd_ac[1];
- pAd->CommonCfg.bACMAPSDTr[2] = apsd_ac[2];
- pAd->CommonCfg.bACMAPSDTr[3] = apsd_ac[3];
- }
- }
-
-}
-
-
-static void HTParametersHook(
- IN PRTMP_ADAPTER pAd,
- IN PSTRING pValueStr,
- IN PSTRING pInput)
-{
-
- long Value;
-
- if (RTMPGetKeyParameter("HT_PROTECT", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bHTProtect = FALSE;
- }
- else
- {
- pAd->CommonCfg.bHTProtect = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Protection = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- if (RTMPGetKeyParameter("HT_MIMOPSEnable", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bMIMOPSEnable = FALSE;
- }
- else
- {
- pAd->CommonCfg.bMIMOPSEnable = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MIMOPSEnable = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
-
- if (RTMPGetKeyParameter("HT_MIMOPSMode", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value > MMPS_ENABLE)
- {
- pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
- }
- else
- {
- //TODO: add mimo power saving mechanism
- pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
- //pAd->CommonCfg.BACapability.field.MMPSmode = Value;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MIMOPS Mode = %d\n", (INT) Value));
- }
-
- if (RTMPGetKeyParameter("HT_BADecline", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bBADecline = FALSE;
- }
- else
- {
- pAd->CommonCfg.bBADecline = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Decline = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
-
- if (RTMPGetKeyParameter("HT_DisableReordering", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bDisableReordering = FALSE;
- }
- else
- {
- pAd->CommonCfg.bDisableReordering = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: DisableReordering = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- if (RTMPGetKeyParameter("HT_AutoBA", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
- pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
- }
- else
- {
- pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
- pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
- }
- pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Auto BA = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- // Tx_+HTC frame
- if (RTMPGetKeyParameter("HT_HTC", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->HTCEnable = FALSE;
- }
- else
- {
- pAd->HTCEnable = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx +HTC frame = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- // Enable HT Link Adaptation Control
- if (RTMPGetKeyParameter("HT_LinkAdapt", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->bLinkAdapt = FALSE;
- }
- else
- {
- pAd->HTCEnable = TRUE;
- pAd->bLinkAdapt = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Link Adaptation Control = %s\n", (Value==0) ? "Disable" : "Enable(+HTC)"));
- }
-
- // Reverse Direction Mechanism
- if (RTMPGetKeyParameter("HT_RDG", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bRdg = FALSE;
- }
- else
- {
- pAd->HTCEnable = TRUE;
- pAd->CommonCfg.bRdg = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: RDG = %s\n", (Value==0) ? "Disable" : "Enable(+HTC)"));
- }
-
-
-
-
- // Tx A-MSUD ?
- if (RTMPGetKeyParameter("HT_AMSDU", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE;
- }
- else
- {
- pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx A-MSDU = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- // MPDU Density
- if (RTMPGetKeyParameter("HT_MpduDensity", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value <=7 && Value >= 0)
- {
- pAd->CommonCfg.BACapability.field.MpduDensity = Value;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MPDU Density = %d\n", (INT) Value));
- }
- else
- {
- pAd->CommonCfg.BACapability.field.MpduDensity = 4;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MPDU Density = %d (Default)\n", 4));
- }
- }
-
- // Max Rx BA Window Size
- if (RTMPGetKeyParameter("HT_BAWinSize", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value >=1 && Value <= 64)
- {
- pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value;
- pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Windw Size = %d\n", (INT) Value));
- }
- else
- {
- pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64;
- pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Windw Size = 64 (Defualt)\n"));
- }
-
- }
-
- // Guard Interval
- if (RTMPGetKeyParameter("HT_GI", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value == GI_400)
- {
- pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Guard Interval = %s\n", (Value==GI_400) ? "400" : "800" ));
- }
-
- // HT Operation Mode : Mixed Mode , Green Field
- if (RTMPGetKeyParameter("HT_OpMode", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value == HTMODE_GF)
- {
-
- pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_GF;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_MM;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Operate Mode = %s\n", (Value==HTMODE_GF) ? "Green Field" : "Mixed Mode" ));
- }
-
- // Fixed Tx mode : CCK, OFDM
- if (RTMPGetKeyParameter("FixedTxMode", pValueStr, 25, pInput, TRUE))
- {
- UCHAR fix_tx_mode;
-
- {
- fix_tx_mode = FIXED_TXMODE_HT;
-
- if (strcmp(pValueStr, "OFDM") == 0 || strcmp(pValueStr, "ofdm") == 0)
- {
- fix_tx_mode = FIXED_TXMODE_OFDM;
- }
- else if (strcmp(pValueStr, "CCK") == 0 || strcmp(pValueStr, "cck") == 0)
- {
- fix_tx_mode = FIXED_TXMODE_CCK;
- }
- else if (strcmp(pValueStr, "HT") == 0 || strcmp(pValueStr, "ht") == 0)
- {
- fix_tx_mode = FIXED_TXMODE_HT;
- }
- else
- {
- Value = simple_strtol(pValueStr, 0, 10);
- // 1 : CCK
- // 2 : OFDM
- // otherwise : HT
- if (Value == FIXED_TXMODE_CCK || Value == FIXED_TXMODE_OFDM)
- fix_tx_mode = Value;
- else
- fix_tx_mode = FIXED_TXMODE_HT;
- }
-
- pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
- DBGPRINT(RT_DEBUG_TRACE, ("Fixed Tx Mode = %d\n", fix_tx_mode));
-
- }
- }
-
-
- // Channel Width
- if (RTMPGetKeyParameter("HT_BW", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value == BW_40)
- {
- pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Channel Width = %s\n", (Value==BW_40) ? "40 MHz" : "20 MHz" ));
- }
-
- if (RTMPGetKeyParameter("HT_EXTCHA", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value == 0)
- {
-
- pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Ext Channel = %s\n", (Value==0) ? "BELOW" : "ABOVE" ));
- }
-
- // MSC
- if (RTMPGetKeyParameter("HT_MCS", pValueStr, 50, pInput, TRUE))
- {
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
-// if ((Value >= 0 && Value <= 15) || (Value == 32))
- if ((Value >= 0 && Value <= 23) || (Value == 32)) // 3*3
- {
- pAd->StaCfg.DesiredTransmitSetting.field.MCS = Value;
- pAd->StaCfg.bAutoTxRateSwitch = FALSE;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = %d\n", pAd->StaCfg.DesiredTransmitSetting.field.MCS));
- }
- else
- {
- pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
- pAd->StaCfg.bAutoTxRateSwitch = TRUE;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = AUTO\n"));
- }
- }
- }
-
- // STBC
- if (RTMPGetKeyParameter("HT_STBC", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == STBC_USE)
- {
- pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: STBC = %d\n", pAd->CommonCfg.RegTransmitSetting.field.STBC));
- }
-
- // 40_Mhz_Intolerant
- if (RTMPGetKeyParameter("HT_40MHZ_INTOLERANT", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bForty_Mhz_Intolerant = FALSE;
- }
- else
- {
- pAd->CommonCfg.bForty_Mhz_Intolerant = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: 40MHZ INTOLERANT = %d\n", pAd->CommonCfg.bForty_Mhz_Intolerant));
- }
- //HT_TxStream
- if(RTMPGetKeyParameter("HT_TxStream", pValueStr, 10, pInput, TRUE))
- {
- switch (simple_strtol(pValueStr, 0, 10))
- {
- case 1:
- pAd->CommonCfg.TxStream = 1;
- break;
- case 2:
- pAd->CommonCfg.TxStream = 2;
- break;
- case 3: // 3*3
- default:
- pAd->CommonCfg.TxStream = 3;
-
- if (pAd->MACVersion < RALINK_2883_VERSION)
- pAd->CommonCfg.TxStream = 2; // only 2 tx streams for RT2860 series
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx Stream = %d\n", pAd->CommonCfg.TxStream));
- }
- //HT_RxStream
- if(RTMPGetKeyParameter("HT_RxStream", pValueStr, 10, pInput, TRUE))
- {
- switch (simple_strtol(pValueStr, 0, 10))
- {
- case 1:
- pAd->CommonCfg.RxStream = 1;
- break;
- case 2:
- pAd->CommonCfg.RxStream = 2;
- break;
- case 3:
- default:
- pAd->CommonCfg.RxStream = 3;
-
- if (pAd->MACVersion < RALINK_2883_VERSION)
- pAd->CommonCfg.RxStream = 2; // only 2 rx streams for RT2860 series
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Rx Stream = %d\n", pAd->CommonCfg.RxStream));
- }
- //2008/11/05: KH add to support Antenna power-saving of AP<--
- //Green AP
- if(RTMPGetKeyParameter("GreenAP", pValueStr, 10, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bGreenAPEnable = FALSE;
- }
- else
- {
- pAd->CommonCfg.bGreenAPEnable = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Green AP= %d\n", pAd->CommonCfg.bGreenAPEnable));
- }
-
- // HT_DisallowTKIP
- if (RTMPGetKeyParameter("HT_DisallowTKIP", pValueStr, 25, pInput, TRUE))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value == 1)
- {
- pAd->CommonCfg.HT_DisallowTKIP = TRUE;
- }
- else
- {
- pAd->CommonCfg.HT_DisallowTKIP = FALSE;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Disallow TKIP mode = %s\n", (pAd->CommonCfg.HT_DisallowTKIP == TRUE) ? "ON" : "OFF" ));
- }
-
-
- //2008/11/05:KH add to support Antenna power-saving of AP-->
-}
-
-
-NDIS_STATUS RTMPSetProfileParameters(
- IN RTMP_ADAPTER *pAd,
- IN PSTRING pBuffer)
-{
- PSTRING tmpbuf;
- ULONG RtsThresh;
- ULONG FragThresh;
- PSTRING macptr;
- INT i = 0, retval;
- tmpbuf = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
- if(tmpbuf == NULL)
- return NDIS_STATUS_FAILURE;
-
- do
- {
- // set file parameter to portcfg
- //CountryRegion
- if(RTMPGetKeyParameter("CountryRegion", tmpbuf, 25, pBuffer, TRUE))
- {
- retval = RT_CfgSetCountryRegion(pAd, tmpbuf, BAND_24G);
- DBGPRINT(RT_DEBUG_TRACE, ("CountryRegion=%d\n", pAd->CommonCfg.CountryRegion));
- }
- //CountryRegionABand
- if(RTMPGetKeyParameter("CountryRegionABand", tmpbuf, 25, pBuffer, TRUE))
- {
- retval = RT_CfgSetCountryRegion(pAd, tmpbuf, BAND_5G);
- DBGPRINT(RT_DEBUG_TRACE, ("CountryRegionABand=%d\n", pAd->CommonCfg.CountryRegionForABand));
- }
- //CountryCode
- if(RTMPGetKeyParameter("CountryCode", tmpbuf, 25, pBuffer, TRUE))
- {
- NdisMoveMemory(pAd->CommonCfg.CountryCode, tmpbuf , 2);
- if (strlen((PSTRING) pAd->CommonCfg.CountryCode) != 0)
- {
- pAd->CommonCfg.bCountryFlag = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("CountryCode=%s\n", pAd->CommonCfg.CountryCode));
- }
- //ChannelGeography
- if(RTMPGetKeyParameter("ChannelGeography", tmpbuf, 25, pBuffer, TRUE))
- {
- UCHAR Geography = (UCHAR) simple_strtol(tmpbuf, 0, 10);
- if (Geography <= BOTH)
- {
- pAd->CommonCfg.Geography = Geography;
- pAd->CommonCfg.CountryCode[2] =
- (pAd->CommonCfg.Geography == BOTH) ? ' ' : ((pAd->CommonCfg.Geography == IDOR) ? 'I' : 'O');
- DBGPRINT(RT_DEBUG_TRACE, ("ChannelGeography=%d\n", pAd->CommonCfg.Geography));
- }
- }
- else
- {
- pAd->CommonCfg.Geography = BOTH;
- pAd->CommonCfg.CountryCode[2] = ' ';
- }
-
- {
- //SSID
- if (RTMPGetKeyParameter("SSID", tmpbuf, 256, pBuffer, FALSE))
- {
- if (strlen(tmpbuf) <= 32)
- {
- pAd->CommonCfg.SsidLen = (UCHAR) strlen(tmpbuf);
- NdisZeroMemory(pAd->CommonCfg.Ssid, NDIS_802_11_LENGTH_SSID);
- NdisMoveMemory(pAd->CommonCfg.Ssid, tmpbuf, pAd->CommonCfg.SsidLen);
- pAd->MlmeAux.AutoReconnectSsidLen = pAd->CommonCfg.SsidLen;
- NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, NDIS_802_11_LENGTH_SSID);
- NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, tmpbuf, pAd->MlmeAux.AutoReconnectSsidLen);
- pAd->MlmeAux.SsidLen = pAd->CommonCfg.SsidLen;
- NdisZeroMemory(pAd->MlmeAux.Ssid, NDIS_802_11_LENGTH_SSID);
- NdisMoveMemory(pAd->MlmeAux.Ssid, tmpbuf, pAd->MlmeAux.SsidLen);
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(SSID=%s)\n", __func__, tmpbuf));
- }
- }
- }
-
- {
- //NetworkType
- if (RTMPGetKeyParameter("NetworkType", tmpbuf, 25, pBuffer, TRUE))
- {
- pAd->bConfigChanged = TRUE;
- if (strcmp(tmpbuf, "Adhoc") == 0)
- pAd->StaCfg.BssType = BSS_ADHOC;
- else //Default Infrastructure mode
- pAd->StaCfg.BssType = BSS_INFRA;
- // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
- pAd->StaCfg.WpaState = SS_NOTUSE;
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(NetworkType=%d)\n", __func__, pAd->StaCfg.BssType));
- }
- }
-#ifdef RTMP_MAC_PCI
- //NewPCIePS
- if(RTMPGetKeyParameter("NewPCIePS", tmpbuf, 10, pBuffer, TRUE))
- {
- UCHAR temp_buffer = (UCHAR) simple_strtol(tmpbuf, 0, 10);
- if(temp_buffer>0)
- pAd->StaCfg.PSControl.field.EnableNewPS=TRUE;
- else
- pAd->StaCfg.PSControl.field.EnableNewPS=FALSE;
- DBGPRINT(RT_DEBUG_TRACE, ("NewPCIePS=%d\n", pAd->StaCfg.PSControl.field.EnableNewPS));
- }
-#endif // RTMP_MAC_PCI //
-#ifdef RT3090
- //PCIePowerLevel
-
- if(RTMPGetKeyParameter("PCIePowerLevel", tmpbuf, 10, pBuffer, TRUE))
- {
- pAd->StaCfg.PSControl.field.rt30xxPowerMode = (UCHAR) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("PCIePowerLevel=%d\n", pAd->StaCfg.PSControl.field.rt30xxPowerMode));
- }
- //FollowHostASPM
- if(RTMPGetKeyParameter("FollowHostASPM", tmpbuf, 10, pBuffer, TRUE))
- {
- UCHAR temp_buffer = (UCHAR) simple_strtol(tmpbuf, 0, 10);
-
- if(temp_buffer>0)
- pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM=TRUE;
- else
- pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM=FALSE;
- DBGPRINT(RT_DEBUG_TRACE, ("rt30xxFollowHostASPM=%d\n", pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM));
- }
- //ForceTestASPM
- if(RTMPGetKeyParameter("ForceTestASPM", tmpbuf, 10, pBuffer, TRUE))
- {
- UCHAR temp_buffer = (UCHAR) simple_strtol(tmpbuf, 0, 10);
-
- if(temp_buffer>0)
- pAd->StaCfg.PSControl.field.rt30xxForceASPMTest=TRUE;
- else
- pAd->StaCfg.PSControl.field.rt30xxForceASPMTest=FALSE;
- DBGPRINT(RT_DEBUG_TRACE, ("rt30xxForceASPM=%d\n", pAd->StaCfg.PSControl.field.rt30xxForceASPMTest));
- }
-#endif // RT3090 //
- //Channel
- if(RTMPGetKeyParameter("Channel", tmpbuf, 10, pBuffer, TRUE))
- {
- pAd->CommonCfg.Channel = (UCHAR) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("Channel=%d\n", pAd->CommonCfg.Channel));
- }
- //WirelessMode
- if(RTMPGetKeyParameter("WirelessMode", tmpbuf, 10, pBuffer, TRUE))
- {
- RT_CfgSetWirelessMode(pAd, tmpbuf);
- DBGPRINT(RT_DEBUG_TRACE, ("PhyMode=%d\n", pAd->CommonCfg.PhyMode));
- }
- //BasicRate
- if(RTMPGetKeyParameter("BasicRate", tmpbuf, 10, pBuffer, TRUE))
- {
- pAd->CommonCfg.BasicRateBitmap = (ULONG) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("BasicRate=%ld\n", pAd->CommonCfg.BasicRateBitmap));
- }
- //BeaconPeriod
- if(RTMPGetKeyParameter("BeaconPeriod", tmpbuf, 10, pBuffer, TRUE))
- {
- pAd->CommonCfg.BeaconPeriod = (USHORT) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("BeaconPeriod=%d\n", pAd->CommonCfg.BeaconPeriod));
- }
- //TxPower
- if(RTMPGetKeyParameter("TxPower", tmpbuf, 10, pBuffer, TRUE))
- {
- pAd->CommonCfg.TxPowerPercentage = (ULONG) simple_strtol(tmpbuf, 0, 10);
- pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
- DBGPRINT(RT_DEBUG_TRACE, ("TxPower=%ld\n", pAd->CommonCfg.TxPowerPercentage));
- }
- //BGProtection
- if(RTMPGetKeyParameter("BGProtection", tmpbuf, 10, pBuffer, TRUE))
- {
- //#if 0 //#ifndef WIFI_TEST
- // pAd->CommonCfg.UseBGProtection = 2;// disable b/g protection for throughput test
- //#else
- switch (simple_strtol(tmpbuf, 0, 10))
- {
- case 1: //Always On
- pAd->CommonCfg.UseBGProtection = 1;
- break;
- case 2: //Always OFF
- pAd->CommonCfg.UseBGProtection = 2;
- break;
- case 0: //AUTO
- default:
- pAd->CommonCfg.UseBGProtection = 0;
- break;
- }
- //#endif
- DBGPRINT(RT_DEBUG_TRACE, ("BGProtection=%ld\n", pAd->CommonCfg.UseBGProtection));
- }
- //OLBCDetection
- if(RTMPGetKeyParameter("DisableOLBC", tmpbuf, 10, pBuffer, TRUE))
- {
- switch (simple_strtol(tmpbuf, 0, 10))
- {
- case 1: //disable OLBC Detection
- pAd->CommonCfg.DisableOLBCDetect = 1;
- break;
- case 0: //enable OLBC Detection
- pAd->CommonCfg.DisableOLBCDetect = 0;
- break;
- default:
- pAd->CommonCfg.DisableOLBCDetect= 0;
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("OLBCDetection=%ld\n", pAd->CommonCfg.DisableOLBCDetect));
- }
- //TxPreamble
- if(RTMPGetKeyParameter("TxPreamble", tmpbuf, 10, pBuffer, TRUE))
- {
- switch (simple_strtol(tmpbuf, 0, 10))
- {
- case Rt802_11PreambleShort:
- pAd->CommonCfg.TxPreamble = Rt802_11PreambleShort;
- break;
- case Rt802_11PreambleLong:
- default:
- pAd->CommonCfg.TxPreamble = Rt802_11PreambleLong;
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("TxPreamble=%ld\n", pAd->CommonCfg.TxPreamble));
- }
- //RTSThreshold
- if(RTMPGetKeyParameter("RTSThreshold", tmpbuf, 10, pBuffer, TRUE))
- {
- RtsThresh = simple_strtol(tmpbuf, 0, 10);
- if( (RtsThresh >= 1) && (RtsThresh <= MAX_RTS_THRESHOLD) )
- pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
- else
- pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
-
- DBGPRINT(RT_DEBUG_TRACE, ("RTSThreshold=%d\n", pAd->CommonCfg.RtsThreshold));
- }
- //FragThreshold
- if(RTMPGetKeyParameter("FragThreshold", tmpbuf, 10, pBuffer, TRUE))
- {
- FragThresh = simple_strtol(tmpbuf, 0, 10);
- pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
-
- if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
- { //illegal FragThresh so we set it to default
- pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
- pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
- }
- else if (FragThresh % 2 == 1)
- {
- // The length of each fragment shall always be an even number of octets, except for the last fragment
- // of an MSDU or MMPDU, which may be either an even or an odd number of octets.
- pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1);
- }
- else
- {
- pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
- }
- //pAd->CommonCfg.AllowFragSize = (pAd->CommonCfg.FragmentThreshold) - LENGTH_802_11 - LENGTH_CRC;
- DBGPRINT(RT_DEBUG_TRACE, ("FragThreshold=%d\n", pAd->CommonCfg.FragmentThreshold));
- }
- //TxBurst
- if(RTMPGetKeyParameter("TxBurst", tmpbuf, 10, pBuffer, TRUE))
- {
- //#ifdef WIFI_TEST
- // pAd->CommonCfg.bEnableTxBurst = FALSE;
- //#else
- if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
- pAd->CommonCfg.bEnableTxBurst = TRUE;
- else //Disable
- pAd->CommonCfg.bEnableTxBurst = FALSE;
- //#endif
- DBGPRINT(RT_DEBUG_TRACE, ("TxBurst=%d\n", pAd->CommonCfg.bEnableTxBurst));
- }
-
-#ifdef AGGREGATION_SUPPORT
- //PktAggregate
- if(RTMPGetKeyParameter("PktAggregate", tmpbuf, 10, pBuffer, TRUE))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
- pAd->CommonCfg.bAggregationCapable = TRUE;
- else //Disable
- pAd->CommonCfg.bAggregationCapable = FALSE;
-#ifdef PIGGYBACK_SUPPORT
- pAd->CommonCfg.bPiggyBackCapable = pAd->CommonCfg.bAggregationCapable;
-#endif // PIGGYBACK_SUPPORT //
- DBGPRINT(RT_DEBUG_TRACE, ("PktAggregate=%d\n", pAd->CommonCfg.bAggregationCapable));
- }
-#else
- pAd->CommonCfg.bAggregationCapable = FALSE;
- pAd->CommonCfg.bPiggyBackCapable = FALSE;
-#endif // AGGREGATION_SUPPORT //
-
- // WmmCapable
-
- rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, pBuffer);
-
- //ShortSlot
- if(RTMPGetKeyParameter("ShortSlot", tmpbuf, 10, pBuffer, TRUE))
- {
- RT_CfgSetShortSlot(pAd, tmpbuf);
- DBGPRINT(RT_DEBUG_TRACE, ("ShortSlot=%d\n", pAd->CommonCfg.bUseShortSlotTime));
- }
- //IEEE80211H
- if(RTMPGetKeyParameter("IEEE80211H", tmpbuf, 10, pBuffer, TRUE))
- {
- for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
- {
- if(simple_strtol(macptr, 0, 10) != 0) //Enable
- pAd->CommonCfg.bIEEE80211H = TRUE;
- else //Disable
- pAd->CommonCfg.bIEEE80211H = FALSE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("IEEE80211H=%d\n", pAd->CommonCfg.bIEEE80211H));
- }
- }
- //CSPeriod
- if(RTMPGetKeyParameter("CSPeriod", tmpbuf, 10, pBuffer, TRUE))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0)
- pAd->CommonCfg.RadarDetect.CSPeriod = simple_strtol(tmpbuf, 0, 10);
- else
- pAd->CommonCfg.RadarDetect.CSPeriod = 0;
-
- DBGPRINT(RT_DEBUG_TRACE, ("CSPeriod=%d\n", pAd->CommonCfg.RadarDetect.CSPeriod));
- }
-
- //RDRegion
- if(RTMPGetKeyParameter("RDRegion", tmpbuf, 128, pBuffer, TRUE))
- {
- RADAR_DETECT_STRUCT *pRadarDetect = &pAd->CommonCfg.RadarDetect;
- if ((strncmp(tmpbuf, "JAP_W53", 7) == 0) || (strncmp(tmpbuf, "jap_w53", 7) == 0))
- {
- pRadarDetect->RDDurRegion = JAP_W53;
- pRadarDetect->DfsSessionTime = 15;
- }
- else if ((strncmp(tmpbuf, "JAP_W56", 7) == 0) || (strncmp(tmpbuf, "jap_w56", 7) == 0))
- {
- pRadarDetect->RDDurRegion = JAP_W56;
- pRadarDetect->DfsSessionTime = 13;
- }
- else if ((strncmp(tmpbuf, "JAP", 3) == 0) || (strncmp(tmpbuf, "jap", 3) == 0))
- {
- pRadarDetect->RDDurRegion = JAP;
- pRadarDetect->DfsSessionTime = 5;
- }
- else if ((strncmp(tmpbuf, "FCC", 3) == 0) || (strncmp(tmpbuf, "fcc", 3) == 0))
- {
- pRadarDetect->RDDurRegion = FCC;
- pRadarDetect->DfsSessionTime = 5;
- }
- else if ((strncmp(tmpbuf, "CE", 2) == 0) || (strncmp(tmpbuf, "ce", 2) == 0))
- {
- pRadarDetect->RDDurRegion = CE;
- pRadarDetect->DfsSessionTime = 13;
- }
- else
- {
- pRadarDetect->RDDurRegion = CE;
- pRadarDetect->DfsSessionTime = 13;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("RDRegion=%d\n", pRadarDetect->RDDurRegion));
- }
- else
- {
- pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
- pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
- }
-
- //WirelessEvent
- if(RTMPGetKeyParameter("WirelessEvent", tmpbuf, 10, pBuffer, TRUE))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0)
- pAd->CommonCfg.bWirelessEvent = simple_strtol(tmpbuf, 0, 10);
- else
- pAd->CommonCfg.bWirelessEvent = 0; // disable
- DBGPRINT(RT_DEBUG_TRACE, ("WirelessEvent=%d\n", pAd->CommonCfg.bWirelessEvent));
- }
- if(RTMPGetKeyParameter("WiFiTest", tmpbuf, 10, pBuffer, TRUE))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0)
- pAd->CommonCfg.bWiFiTest= simple_strtol(tmpbuf, 0, 10);
- else
- pAd->CommonCfg.bWiFiTest = 0; // disable
-
- DBGPRINT(RT_DEBUG_TRACE, ("WiFiTest=%d\n", pAd->CommonCfg.bWiFiTest));
- }
- //AuthMode
- if(RTMPGetKeyParameter("AuthMode", tmpbuf, 128, pBuffer, TRUE))
- {
- {
- if ((strcmp(tmpbuf, "WEPAUTO") == 0) || (strcmp(tmpbuf, "wepauto") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
- else if ((strcmp(tmpbuf, "SHARED") == 0) || (strcmp(tmpbuf, "shared") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeShared;
- else if ((strcmp(tmpbuf, "WPAPSK") == 0) || (strcmp(tmpbuf, "wpapsk") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
- else if ((strcmp(tmpbuf, "WPANONE") == 0) || (strcmp(tmpbuf, "wpanone") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
- else if ((strcmp(tmpbuf, "WPA2PSK") == 0) || (strcmp(tmpbuf, "wpa2psk") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
- else if ((strcmp(tmpbuf, "WPA") == 0) || (strcmp(tmpbuf, "wpa") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
- else if ((strcmp(tmpbuf, "WPA2") == 0) || (strcmp(tmpbuf, "wpa2") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
- else
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-
- pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(AuthMode=%d)\n", __func__, pAd->StaCfg.AuthMode));
- }
- }
- //EncrypType
- if(RTMPGetKeyParameter("EncrypType", tmpbuf, 128, pBuffer, TRUE))
- {
- {
- if ((strcmp(tmpbuf, "WEP") == 0) || (strcmp(tmpbuf, "wep") == 0))
- pAd->StaCfg.WepStatus = Ndis802_11WEPEnabled;
- else if ((strcmp(tmpbuf, "TKIP") == 0) || (strcmp(tmpbuf, "tkip") == 0))
- pAd->StaCfg.WepStatus = Ndis802_11Encryption2Enabled;
- else if ((strcmp(tmpbuf, "AES") == 0) || (strcmp(tmpbuf, "aes") == 0))
- pAd->StaCfg.WepStatus = Ndis802_11Encryption3Enabled;
- else
- pAd->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-
- // Update all wepstatus related
- pAd->StaCfg.PairCipher = pAd->StaCfg.WepStatus;
- pAd->StaCfg.GroupCipher = pAd->StaCfg.WepStatus;
- pAd->StaCfg.OrigWepStatus = pAd->StaCfg.WepStatus;
- pAd->StaCfg.bMixCipher = FALSE;
-
- //RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
- }
- }
-
- {
- if(RTMPGetKeyParameter("WPAPSK", tmpbuf, 512, pBuffer, FALSE))
- {
- int ret = TRUE;
-
- tmpbuf[strlen(tmpbuf)] = '\0'; // make STA can process .$^& for WPAPSK input
-
- if ((pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
- (pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
- (pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
- )
- {
- ret = FALSE;
- }
- else
- {
- ret = RT_CfgSetWPAPSKKey(pAd, tmpbuf, (PUCHAR)pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, pAd->StaCfg.PMK);
- }
-
- if (ret == TRUE)
- {
- RTMPZeroMemory(pAd->StaCfg.WpaPassPhrase, 64);
- RTMPMoveMemory(pAd->StaCfg.WpaPassPhrase, tmpbuf, strlen(tmpbuf));
- pAd->StaCfg.WpaPassPhraseLen= strlen(tmpbuf);
-
- if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
- (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
- {
- // Start STA supplicant state machine
- pAd->StaCfg.WpaState = SS_START;
- }
- else if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
- {
- pAd->StaCfg.WpaState = SS_NOTUSE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(WPAPSK=%s)\n", __func__, tmpbuf));
- }
- }
- }
-
- //DefaultKeyID, KeyType, KeyStr
- rtmp_read_key_parms_from_file(pAd, tmpbuf, pBuffer);
-
-
- //HSCounter
- /*if(RTMPGetKeyParameter("HSCounter", tmpbuf, 10, pBuffer, TRUE))
- {
- switch (simple_strtol(tmpbuf, 0, 10))
- {
- case 1: //Enable
- pAd->CommonCfg.bEnableHSCounter = TRUE;
- break;
- case 0: //Disable
- default:
- pAd->CommonCfg.bEnableHSCounter = FALSE;
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, "HSCounter=%d\n", pAd->CommonCfg.bEnableHSCounter);
- }*/
-
- HTParametersHook(pAd, tmpbuf, pBuffer);
-
- {
- //PSMode
- if (RTMPGetKeyParameter("PSMode", tmpbuf, 10, pBuffer, TRUE))
- {
- if (pAd->StaCfg.BssType == BSS_INFRA)
- {
- if ((strcmp(tmpbuf, "MAX_PSP") == 0) || (strcmp(tmpbuf, "max_psp") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
- // to exclude certain situations.
- // MlmeSetPsm(pAd, PWR_SAVE);
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
- if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
- pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
- pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
- pAd->StaCfg.DefaultListenCount = 5;
- }
- else if ((strcmp(tmpbuf, "Fast_PSP") == 0) || (strcmp(tmpbuf, "fast_psp") == 0)
- || (strcmp(tmpbuf, "FAST_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
- // to exclude certain situations.
- // RTMP_SET_PSM_BIT(pAd, PWR_SAVE);
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
- if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
- pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
- pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
- pAd->StaCfg.DefaultListenCount = 3;
- }
- else if ((strcmp(tmpbuf, "Legacy_PSP") == 0) || (strcmp(tmpbuf, "legacy_psp") == 0)
- || (strcmp(tmpbuf, "LEGACY_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
- // to exclude certain situations.
- // RTMP_SET_PSM_BIT(pAd, PWR_SAVE);
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
- if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
- pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
- pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
- pAd->StaCfg.DefaultListenCount = 3;
- }
- else
- { //Default Ndis802_11PowerModeCAM
- // clear PSM bit immediately
- RTMP_SET_PSM_BIT(pAd, PWR_ACTIVE);
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
- if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
- pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
- pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("PSMode=%ld\n", pAd->StaCfg.WindowsPowerMode));
- }
- }
- // AutoRoaming by RSSI
- if (RTMPGetKeyParameter("AutoRoaming", tmpbuf, 32, pBuffer, TRUE))
- {
- if (simple_strtol(tmpbuf, 0, 10) == 0)
- pAd->StaCfg.bAutoRoaming = FALSE;
- else
- pAd->StaCfg.bAutoRoaming = TRUE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("AutoRoaming=%d\n", pAd->StaCfg.bAutoRoaming));
- }
- // RoamThreshold
- if (RTMPGetKeyParameter("RoamThreshold", tmpbuf, 32, pBuffer, TRUE))
- {
- long lInfo = simple_strtol(tmpbuf, 0, 10);
-
- if (lInfo > 90 || lInfo < 60)
- pAd->StaCfg.dBmToRoam = -70;
- else
- pAd->StaCfg.dBmToRoam = (CHAR)(-1)*lInfo;
-
- DBGPRINT(RT_DEBUG_TRACE, ("RoamThreshold=%d dBm\n", pAd->StaCfg.dBmToRoam));
- }
-
- if(RTMPGetKeyParameter("TGnWifiTest", tmpbuf, 10, pBuffer, TRUE))
- {
- if(simple_strtol(tmpbuf, 0, 10) == 0)
- pAd->StaCfg.bTGnWifiTest = FALSE;
- else
- pAd->StaCfg.bTGnWifiTest = TRUE;
- DBGPRINT(RT_DEBUG_TRACE, ("TGnWifiTest=%d\n", pAd->StaCfg.bTGnWifiTest));
- }
-
- // Beacon Lost Time
- if (RTMPGetKeyParameter("BeaconLostTime", tmpbuf, 32, pBuffer, TRUE))
- {
- ULONG lInfo = (ULONG)simple_strtol(tmpbuf, 0, 10);
-
- if ((lInfo != 0) && (lInfo <= 60))
- pAd->StaCfg.BeaconLostTime = (lInfo * OS_HZ);
- DBGPRINT(RT_DEBUG_TRACE, ("BeaconLostTime=%ld \n", pAd->StaCfg.BeaconLostTime));
- }
-
-
- }
-
-
-
-
- }while(0);
-
-
- kfree(tmpbuf);
-
- return NDIS_STATUS_SUCCESS;
-
-}
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -2451,17 +2451,6 @@ NDIS_STATUS RTMPAllocAdapterBlock(
NDIS_STATUS RTMPAllocTxRxRingMemory(
IN PRTMP_ADAPTER pAd);
-NDIS_STATUS RTMPSetProfileParameters(
- IN RTMP_ADAPTER *pAd,
- IN PSTRING pBuffer);
-
-INT RTMPGetKeyParameter(
- IN PSTRING key,
- OUT PSTRING dest,
- IN INT destsize,
- IN PSTRING buffer,
- IN BOOLEAN bTrimSpace);
-
VOID RTMPFreeAdapter(
IN PRTMP_ADAPTER pAd);
@@ -4628,33 +4617,10 @@ VOID BARecSessionTearDown(
BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-
-
-
-BOOLEAN rtstrmactohex(
- IN PSTRING s1,
- IN PSTRING s2);
-
-BOOLEAN rtstrcasecmp(
- IN PSTRING s1,
- IN PSTRING s2);
-
-PSTRING rtstrstruncasecmp(
- IN PSTRING s1,
- IN PSTRING s2);
-
-PSTRING rtstrstr(
- IN const PSTRING s1,
- IN const PSTRING s2);
-
PSTRING rstrtok(
IN PSTRING s,
IN const PSTRING ct);
-int rtinet_aton(
- const PSTRING cp,
- unsigned int *addr);
-
////////// common ioctl functions //////////
INT SetCommonHT(
IN PRTMP_ADAPTER pAd);
Index: b/drivers/staging/rt2870/Makefile
===================================================================
--- a/drivers/staging/rt2870/Makefile
+++ b/drivers/staging/rt2870/Makefile
@@ -28,7 +28,6 @@ rt2870sta-objs := \
common/spectrum.o \
common/rtmp_timer.o \
common/rt_channel.o \
- common/cmm_profile.o \
common/cmm_asic.o \
sta/assoc.o \
sta/auth.o \
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 10/12] Staging: rt28x0: remove dead code from rtmp_phy.h
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
` (8 preceding siblings ...)
2009-10-21 20:44 ` [PATCH 09/12] Staging: rt28x0: remove optional cmm profile parameters Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:44 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:45 ` [PATCH 11/12] Staging: rt28x0: remove unused SHA256 code Bartlomiej Zolnierkiewicz
2009-10-21 20:45 ` [PATCH 12/12] Staging: rt28x0: remove dead code Bartlomiej Zolnierkiewicz
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:44 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove dead code from rtmp_phy.h
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/chip/rtmp_phy.h | 28 +---------------------------
1 file changed, 1 insertion(+), 27 deletions(-)
Index: b/drivers/staging/rt2860/chip/rtmp_phy.h
===================================================================
--- a/drivers/staging/rt2860/chip/rtmp_phy.h
+++ b/drivers/staging/rt2860/chip/rtmp_phy.h
@@ -278,18 +278,6 @@
But for some chipset which didn't have mcu (e.g., RBUS based chipset), we
will use this function too and didn't access the bbp register via the MCU.
*/
-#if 0
-#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) \
- do{ \
- if ((_A)->bPCIclkOff == FALSE) \
- { \
- if ((_A)->infType == RTMP_DEV_INF_RBUS) \
- RTMP_BBP_IO_READ8((_A), (_I), (_pV), FALSE); \
- else \
- RTMP_BBP_IO_READ8((_A), (_I), (_pV), TRUE); \
- } \
- }while(0)
-#else
// Read BBP register by register's ID. Generate PER to test BA
#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) \
{ \
@@ -381,7 +369,6 @@
*(_pV) = (_A)->BbpWriteLatch[_I]; \
} \
}
-#endif // 0 //
/*
basic marco for BBP write operation.
@@ -441,18 +428,6 @@
But for some chipset which didn't have mcu (e.g., RBUS based chipset), we
will use this function too and didn't access the bbp register via the MCU.
*/
-#if 0
-#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _pV) \
- do{ \
- if ((_A)->bPCIclkOff == FALSE) \
- { \
- if ((_A)->infType == RTMP_DEV_INF_RBUS) \
- RTMP_BBP_IO_WRITE8((_A), (_I), (_pV), FALSE); \
- else \
- RTMP_BBP_IO_WRITE8((_A), (_I), (_pV), TRUE); \
- } \
- }while(0)
-#else
// Write BBP register by register's ID & value
#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) \
{ \
@@ -538,9 +513,8 @@
DBGPRINT_ERR(("****** BBP_Write_Latch Buffer exceeds max boundry ****** \n")); \
} \
}
-#endif // 0 //
-
#endif // RTMP_MAC_PCI //
+
#ifdef RTMP_MAC_USB
#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV)
#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTUSBWriteBBPRegister(_A, _I, _V)
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 11/12] Staging: rt28x0: remove unused SHA256 code
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
` (9 preceding siblings ...)
2009-10-21 20:44 ` [PATCH 10/12] Staging: rt28x0: remove dead code from rtmp_phy.h Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:45 ` Bartlomiej Zolnierkiewicz
2009-10-21 20:45 ` [PATCH 12/12] Staging: rt28x0: remove dead code Bartlomiej Zolnierkiewicz
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:45 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 14101 bytes --]
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove unused SHA256 code
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/common/crypt_hmac.c | 85 ---------
drivers/staging/rt2860/common/crypt_sha2.c | 257 -----------------------------
drivers/staging/rt2860/crypt_hmac.h | 11 -
drivers/staging/rt2860/crypt_sha2.h | 28 ---
4 files changed, 381 deletions(-)
Index: b/drivers/staging/rt2860/common/crypt_hmac.c
===================================================================
--- a/drivers/staging/rt2860/common/crypt_hmac.c
+++ b/drivers/staging/rt2860/common/crypt_hmac.c
@@ -109,91 +109,6 @@ VOID HMAC_SHA1 (
} /* End of HMAC_SHA1 */
#endif /* HMAC_SHA1_SUPPORT */
-
-#ifdef HMAC_SHA256_SUPPORT
-/*
-========================================================================
-Routine Description:
- HMAC using SHA256 hash function
-
-Arguments:
- key Secret key
- key_len The length of the key in bytes
- message Message context
- message_len The length of message in bytes
- macLen Request the length of message authentication code
-
-Return Value:
- mac Message authentication code
-
-Note:
- None
-========================================================================
-*/
-VOID HMAC_SHA256 (
- IN const UINT8 Key[],
- IN UINT KeyLen,
- IN const UINT8 Message[],
- IN UINT MessageLen,
- OUT UINT8 MAC[],
- IN UINT MACLen)
-{
- SHA256_CTX_STRUC sha_ctx1;
- SHA256_CTX_STRUC sha_ctx2;
- UINT8 K0[SHA256_BLOCK_SIZE];
- UINT8 Digest[SHA256_DIGEST_SIZE];
- UINT index;
-
- NdisZeroMemory(&sha_ctx1, sizeof(SHA256_CTX_STRUC));
- NdisZeroMemory(&sha_ctx2, sizeof(SHA256_CTX_STRUC));
- /*
- * If the length of K = B(Block size): K0 = K.
- * If the length of K > B: hash K to obtain an L byte string,
- * then append (B-L) zeros to create a B-byte string K0 (i.e., K0 = H(K) || 00...00).
- * If the length of K < B: append zeros to the end of K to create a B-byte string K0
- */
- NdisZeroMemory(K0, SHA256_BLOCK_SIZE);
- if (KeyLen <= SHA256_BLOCK_SIZE) {
- NdisMoveMemory(K0, Key, KeyLen);
- } else {
- RT_SHA256(Key, KeyLen, K0);
- }
-
- /* Exclusive-Or K0 with ipad */
- /* ipad: Inner pad; the byte x¡¦36¡¦ repeated B times. */
- for (index = 0; index < SHA256_BLOCK_SIZE; index++)
- K0[index] ^= 0x36;
- /* End of for */
-
- SHA256_Init(&sha_ctx1);
- /* H(K0^ipad) */
- SHA256_Append(&sha_ctx1, K0, sizeof(K0));
- /* H((K0^ipad)||text) */
- SHA256_Append(&sha_ctx1, Message, MessageLen);
- SHA256_End(&sha_ctx1, Digest);
-
- /* Exclusive-Or K0 with opad and remove ipad */
- /* opad: Outer pad; the byte x¡¦5c¡¦ repeated B times. */
- for (index = 0; index < SHA256_BLOCK_SIZE; index++)
- K0[index] ^= 0x36^0x5c;
- /* End of for */
-
- SHA256_Init(&sha_ctx2);
- /* H(K0^opad) */
- SHA256_Append(&sha_ctx2, K0, sizeof(K0));
- /* H( (K0^opad) || H((K0^ipad)||text) ) */
- SHA256_Append(&sha_ctx2, Digest, SHA256_DIGEST_SIZE);
- SHA256_End(&sha_ctx2, Digest);
-
- if (MACLen > SHA256_DIGEST_SIZE)
- NdisMoveMemory(MAC, Digest,SHA256_DIGEST_SIZE);
- else
- NdisMoveMemory(MAC, Digest, MACLen);
-
-} /* End of HMAC_SHA256 */
-#endif /* HMAC_SHA256_SUPPORT */
-
-
#ifdef HMAC_MD5_SUPPORT
/*
========================================================================
Index: b/drivers/staging/rt2860/common/crypt_sha2.c
===================================================================
--- a/drivers/staging/rt2860/common/crypt_sha2.c
+++ b/drivers/staging/rt2860/common/crypt_sha2.c
@@ -47,42 +47,7 @@ static const UINT32 SHA1_K[4] = {
static const UINT32 SHA1_DefaultHashValue[5] = {
0x67452301UL, 0xefcdab89UL, 0x98badcfeUL, 0x10325476UL, 0xc3d2e1f0UL
};
-#endif /* SHA1_SUPPORT */
-
-
-#ifdef SHA256_SUPPORT
-/* SHA256 functions */
-#define Zsigma_256_0(x) (ROTR32(x,2) ^ ROTR32(x,13) ^ ROTR32(x,22))
-#define Zsigma_256_1(x) (ROTR32(x,6) ^ ROTR32(x,11) ^ ROTR32(x,25))
-#define Sigma_256_0(x) (ROTR32(x,7) ^ ROTR32(x,18) ^ SHR(x,3))
-#define Sigma_256_1(x) (ROTR32(x,17) ^ ROTR32(x,19) ^ SHR(x,10))
-/* SHA256 constants */
-static const UINT32 SHA256_K[64] = {
- 0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL,
- 0x3956c25bUL, 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL,
- 0xd807aa98UL, 0x12835b01UL, 0x243185beUL, 0x550c7dc3UL,
- 0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL, 0xc19bf174UL,
- 0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL,
- 0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL,
- 0x983e5152UL, 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL,
- 0xc6e00bf3UL, 0xd5a79147UL, 0x06ca6351UL, 0x14292967UL,
- 0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL, 0x53380d13UL,
- 0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL,
- 0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL,
- 0xd192e819UL, 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL,
- 0x19a4c116UL, 0x1e376c08UL, 0x2748774cUL, 0x34b0bcb5UL,
- 0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL, 0x682e6ff3UL,
- 0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL,
- 0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL
-};
-static const UINT32 SHA256_DefaultHashValue[8] = {
- 0x6a09e667UL, 0xbb67ae85UL, 0x3c6ef372UL, 0xa54ff53aUL,
- 0x510e527fUL, 0x9b05688cUL, 0x1f83d9abUL, 0x5be0cd19UL
-};
-#endif /* SHA256_SUPPORT */
-
-#ifdef SHA1_SUPPORT
/*
========================================================================
Routine Description:
@@ -310,226 +275,4 @@ VOID RT_SHA1 (
} /* End of RT_SHA1 */
#endif /* SHA1_SUPPORT */
-
-#ifdef SHA256_SUPPORT
-/*
-========================================================================
-Routine Description:
- Initial SHA256_CTX_STRUC
-
-Arguments:
- pSHA_CTX Pointer to SHA256_CTX_STRUC
-
-Return Value:
- None
-
-Note:
- None
-========================================================================
-*/
-VOID SHA256_Init (
- IN SHA256_CTX_STRUC *pSHA_CTX)
-{
- NdisMoveMemory(pSHA_CTX->HashValue, SHA256_DefaultHashValue,
- sizeof(SHA256_DefaultHashValue));
- NdisZeroMemory(pSHA_CTX->Block, SHA256_BLOCK_SIZE);
- pSHA_CTX->MessageLen = 0;
- pSHA_CTX->BlockLen = 0;
-} /* End of SHA256_Init */
-
-
-/*
-========================================================================
-Routine Description:
- SHA256 computation for one block (512 bits)
-
-Arguments:
- pSHA_CTX Pointer to SHA256_CTX_STRUC
-
-Return Value:
- None
-
-Note:
- None
-========================================================================
-*/
-VOID SHA256_Hash (
- IN SHA256_CTX_STRUC *pSHA_CTX)
-{
- UINT32 W_i,t;
- UINT32 W[64];
- UINT32 a,b,c,d,e,f,g,h,T1,T2;
-
- /* Prepare the message schedule, {W_i}, 0 < t < 15 */
- NdisMoveMemory(W, pSHA_CTX->Block, SHA256_BLOCK_SIZE);
- for (W_i = 0; W_i < 16; W_i++)
- W[W_i] = cpu2be32(W[W_i]); /* Endian Swap */
- /* End of for */
-
- /* SHA256 hash computation */
- /* Initialize the working variables */
- a = pSHA_CTX->HashValue[0];
- b = pSHA_CTX->HashValue[1];
- c = pSHA_CTX->HashValue[2];
- d = pSHA_CTX->HashValue[3];
- e = pSHA_CTX->HashValue[4];
- f = pSHA_CTX->HashValue[5];
- g = pSHA_CTX->HashValue[6];
- h = pSHA_CTX->HashValue[7];
-
- /* 64 rounds */
- for (t = 0;t < 64;t++) {
- if (t > 15) /* Prepare the message schedule, {W_i}, 16 < t < 63 */
- W[t] = Sigma_256_1(W[t-2]) + W[t-7] + Sigma_256_0(W[t-15]) + W[t-16];
- /* End of if */
- T1 = h + Zsigma_256_1(e) + Ch(e,f,g) + SHA256_K[t] + W[t];
- T2 = Zsigma_256_0(a) + Maj(a,b,c);
- h = g;
- g = f;
- f = e;
- e = d + T1;
- d = c;
- c = b;
- b = a;
- a = T1 + T2;
- } /* End of for */
-
- /* Compute the i^th intermediate hash value H^(i) */
- pSHA_CTX->HashValue[0] += a;
- pSHA_CTX->HashValue[1] += b;
- pSHA_CTX->HashValue[2] += c;
- pSHA_CTX->HashValue[3] += d;
- pSHA_CTX->HashValue[4] += e;
- pSHA_CTX->HashValue[5] += f;
- pSHA_CTX->HashValue[6] += g;
- pSHA_CTX->HashValue[7] += h;
-
- NdisZeroMemory(pSHA_CTX->Block, SHA256_BLOCK_SIZE);
- pSHA_CTX->BlockLen = 0;
-} /* End of SHA256_Hash */
-
-
-/*
-========================================================================
-Routine Description:
- The message is appended to block. If block size > 64 bytes, the SHA256_Hash
-will be called.
-
-Arguments:
- pSHA_CTX Pointer to SHA256_CTX_STRUC
- message Message context
- messageLen The length of message in bytes
-
-Return Value:
- None
-
-Note:
- None
-========================================================================
-*/
-VOID SHA256_Append (
- IN SHA256_CTX_STRUC *pSHA_CTX,
- IN const UINT8 Message[],
- IN UINT MessageLen)
-{
- UINT appendLen = 0;
- UINT diffLen = 0;
-
- while (appendLen != MessageLen) {
- diffLen = MessageLen - appendLen;
- if ((pSHA_CTX->BlockLen + diffLen) < SHA256_BLOCK_SIZE) {
- NdisMoveMemory(pSHA_CTX->Block + pSHA_CTX->BlockLen,
- Message + appendLen, diffLen);
- pSHA_CTX->BlockLen += diffLen;
- appendLen += diffLen;
- }
- else
- {
- NdisMoveMemory(pSHA_CTX->Block + pSHA_CTX->BlockLen,
- Message + appendLen, SHA256_BLOCK_SIZE - pSHA_CTX->BlockLen);
- appendLen += (SHA256_BLOCK_SIZE - pSHA_CTX->BlockLen);
- pSHA_CTX->BlockLen = SHA256_BLOCK_SIZE;
- SHA256_Hash(pSHA_CTX);
- } /* End of if */
- } /* End of while */
- pSHA_CTX->MessageLen += MessageLen;
-} /* End of SHA256_Append */
-
-
-/*
-========================================================================
-Routine Description:
- 1. Append bit 1 to end of the message
- 2. Append the length of message in rightmost 64 bits
- 3. Transform the Hash Value to digest message
-
-Arguments:
- pSHA_CTX Pointer to SHA256_CTX_STRUC
-
-Return Value:
- digestMessage Digest message
-
-Note:
- None
-========================================================================
-*/
-VOID SHA256_End (
- IN SHA256_CTX_STRUC *pSHA_CTX,
- OUT UINT8 DigestMessage[])
-{
- UINT index;
- UINT64 message_length_bits;
-
- /* Append bit 1 to end of the message */
- NdisFillMemory(pSHA_CTX->Block + pSHA_CTX->BlockLen, 1, 0x80);
-
- /* 55 = 64 - 8 - 1: append 1 bit(1 byte) and message length (8 bytes) */
- if (pSHA_CTX->BlockLen > 55)
- SHA256_Hash(pSHA_CTX);
- /* End of if */
-
- /* Append the length of message in rightmost 64 bits */
- message_length_bits = pSHA_CTX->MessageLen*8;
- message_length_bits = cpu2be64(message_length_bits);
- NdisMoveMemory(&pSHA_CTX->Block[56], &message_length_bits, 8);
- SHA256_Hash(pSHA_CTX);
-
- /* Return message digest, transform the UINT32 hash value to bytes */
- for (index = 0; index < 8;index++)
- pSHA_CTX->HashValue[index] = cpu2be32(pSHA_CTX->HashValue[index]);
- /* End of for */
- NdisMoveMemory(DigestMessage, pSHA_CTX->HashValue, SHA256_DIGEST_SIZE);
-} /* End of SHA256_End */
-
-
-/*
-========================================================================
-Routine Description:
- SHA256 algorithm
-
-Arguments:
- message Message context
- messageLen The length of message in bytes
-
-Return Value:
- digestMessage Digest message
-
-Note:
- None
-========================================================================
-*/
-VOID RT_SHA256 (
- IN const UINT8 Message[],
- IN UINT MessageLen,
- OUT UINT8 DigestMessage[])
-{
- SHA256_CTX_STRUC sha_ctx;
-
- NdisZeroMemory(&sha_ctx, sizeof(SHA256_CTX_STRUC));
- SHA256_Init(&sha_ctx);
- SHA256_Append(&sha_ctx, Message, MessageLen);
- SHA256_End(&sha_ctx, DigestMessage);
-} /* End of RT_SHA256 */
-#endif /* SHA256_SUPPORT */
-
/* End of crypt_sha2.c */
Index: b/drivers/staging/rt2860/crypt_hmac.h
===================================================================
--- a/drivers/staging/rt2860/crypt_hmac.h
+++ b/drivers/staging/rt2860/crypt_hmac.h
@@ -57,17 +57,6 @@ VOID HMAC_SHA1 (
IN UINT MACLen);
#endif /* SHA1_SUPPORT */
-#ifdef SHA256_SUPPORT
-#define HMAC_SHA256_SUPPORT
-VOID HMAC_SHA256 (
- IN const UINT8 Key[],
- IN UINT KeyLen,
- IN const UINT8 Message[],
- IN UINT MessageLen,
- OUT UINT8 MAC[],
- IN UINT MACLen);
-#endif /* SHA256_SUPPORT */
-
#ifdef MD5_SUPPORT
#define HMAC_MD5_SUPPORT
VOID HMAC_MD5 (
Index: b/drivers/staging/rt2860/crypt_sha2.h
===================================================================
--- a/drivers/staging/rt2860/crypt_sha2.h
+++ b/drivers/staging/rt2860/crypt_sha2.h
@@ -50,7 +50,6 @@
/* Algorithm options */
#define SHA1_SUPPORT
-#define SHA256_SUPPORT
#ifdef SHA1_SUPPORT
#define SHA1_BLOCK_SIZE 64 /* 512 bits = 64 bytes */
@@ -79,31 +78,4 @@ VOID RT_SHA1 (
OUT UINT8 DigestMessage[]);
#endif /* SHA1_SUPPORT */
-#ifdef SHA256_SUPPORT
-#define SHA256_BLOCK_SIZE 64 /* 512 bits = 64 bytes */
-#define SHA256_DIGEST_SIZE 32 /* 256 bits = 32 bytes */
-typedef struct _SHA256_CTX_STRUC {
- UINT32 HashValue[8]; /* 8 = (SHA256_DIGEST_SIZE / 32) */
- UINT64 MessageLen; /* total size */
- UINT8 Block[SHA256_BLOCK_SIZE];
- UINT BlockLen;
-} SHA256_CTX_STRUC, *PSHA256_CTX_STRUC;
-
-VOID SHA256_Init (
- IN SHA256_CTX_STRUC *pSHA_CTX);
-VOID SHA256_Hash (
- IN SHA256_CTX_STRUC *pSHA_CTX);
-VOID SHA256_Append (
- IN SHA256_CTX_STRUC *pSHA_CTX,
- IN const UINT8 Message[],
- IN UINT MessageLen);
-VOID SHA256_End (
- IN SHA256_CTX_STRUC *pSHA_CTX,
- OUT UINT8 DigestMessage[]);
-VOID RT_SHA256 (
- IN const UINT8 Message[],
- IN UINT MessageLen,
- OUT UINT8 DigestMessage[]);
-#endif /* SHA256_SUPPORT */
-
#endif /* __CRYPT_SHA2_H__ */
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 12/12] Staging: rt28x0: remove dead code
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
` (10 preceding siblings ...)
2009-10-21 20:45 ` [PATCH 11/12] Staging: rt28x0: remove unused SHA256 code Bartlomiej Zolnierkiewicz
@ 2009-10-21 20:45 ` Bartlomiej Zolnierkiewicz
11 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-21 20:45 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: devel, Bartlomiej Zolnierkiewicz, linux-kernel
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rt28x0: remove dead code
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rt2860/oid.h | 19 -------------------
drivers/staging/rt2860/rt_config.h | 8 --------
drivers/staging/rt2860/rt_linux.h | 10 ----------
drivers/staging/rt2860/rtmp.h | 13 -------------
drivers/staging/rt2860/rtmp_def.h | 9 ---------
5 files changed, 59 deletions(-)
Index: b/drivers/staging/rt2860/oid.h
===================================================================
--- a/drivers/staging/rt2860/oid.h
+++ b/drivers/staging/rt2860/oid.h
@@ -502,19 +502,6 @@ typedef struct _NDIS_802_11_AUTHENTICATI
NDIS_802_11_AUTHENTICATION_REQUEST Request[1];
} NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT;
-/*
-typedef struct _NDIS_802_11_TEST
-{
- ULONG Length;
- ULONG Type;
- union
- {
- NDIS_802_11_AUTHENTICATION_EVENT AuthenticationEvent;
- NDIS_802_11_RSSI RssiTrigger;
- };
-} NDIS_802_11_TEST, *PNDIS_802_11_TEST;
- */
-
// 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE
typedef enum _NDIS_802_11_MEDIA_STREAM_MODE
{
@@ -553,10 +540,6 @@ typedef struct _NDIS_802_11_CAPABILITY
NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1];
} NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
-#ifdef LINUX
-#endif // LINUX //
-
-
#define RT_PRIV_IOCTL (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
#define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02)
@@ -593,8 +576,6 @@ enum {
#define OID_802_11_GET_COUNTRY_CODE 0x0716
#define OID_802_11_GET_CHANNEL_GEOGRAPHY 0x0717
-//#define RT_OID_802_11_STATISTICS (OID_GET_SET_TOGGLE | OID_802_11_STATISTICS)
-
#define RT_OID_WSC_SET_PASSPHRASE 0x0740 // passphrase for wpa(2)-psk
#define RT_OID_WSC_DRIVER_AUTO_CONNECT 0x0741
#define RT_OID_WSC_QUERY_DEFAULT_PROFILE 0x0742
Index: b/drivers/staging/rt2860/rt_config.h
===================================================================
--- a/drivers/staging/rt2860/rt_config.h
+++ b/drivers/staging/rt2860/rt_config.h
@@ -64,14 +64,6 @@
#include "rtmp_mcu.h"
#endif
-#undef AP_WSC_INCLUDED
-#undef STA_WSC_INCLUDED
-#undef WSC_INCLUDED
-
-
-
-
-
#ifdef IGMP_SNOOP_SUPPORT
#include "igmp_snoop.h"
#endif // IGMP_SNOOP_SUPPORT //
Index: b/drivers/staging/rt2860/rt_linux.h
===================================================================
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -75,16 +75,6 @@
#include <linux/kthread.h>
#endif // KTHREAD_SUPPORT //
-#undef AP_WSC_INCLUDED
-#undef STA_WSC_INCLUDED
-#undef WSC_INCLUDED
-
-
-
-
-#ifdef KTHREAD_SUPPORT
-#endif // KTHREAD_SUPPORT //
-
/***********************************************************************************
* Profile related sections
***********************************************************************************/
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -41,23 +41,10 @@
#define __RTMP_H__
#include "spectrum_def.h"
-
#include "rtmp_dot11.h"
-
-#undef AP_WSC_INCLUDED
-#undef STA_WSC_INCLUDED
-#undef WSC_INCLUDED
-
-
-
-#if defined(AP_WSC_INCLUDED) || defined(STA_WSC_INCLUDED)
-#define WSC_INCLUDED
-#endif
-
#include "rtmp_chip.h"
-
typedef struct _RTMP_ADAPTER RTMP_ADAPTER;
typedef struct _RTMP_ADAPTER *PRTMP_ADAPTER;
Index: b/drivers/staging/rt2860/rtmp_def.h
===================================================================
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -41,15 +41,6 @@
#include "oid.h"
-#undef AP_WSC_INCLUDED
-#undef STA_WSC_INCLUDED
-#undef WSC_INCLUDED
-
-
-
-#if defined(AP_WSC_INCLUDED) || defined(STA_WSC_INCLUDED)
-#define WSC_INCLUDED
-#endif
//
// Debug information verbosity: lower values indicate higher urgency
//
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2009-10-21 20:45 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-21 20:43 [PATCH 00/12] Staging: rt28x0 cleanups Bartlomiej Zolnierkiewicz
2009-10-21 20:43 ` [PATCH 01/12] Staging: rt28x0: remove unused ->eewrite methods Bartlomiej Zolnierkiewicz
2009-10-21 20:43 ` [PATCH 02/12] Staging: rt28x0: remove unused code from common/ee_efuse-c Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 03/12] Staging: rt28x0: remove private RTPRIV_IOCTL_SET ioctl Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 04/12] Staging: rt28x0: remove private RTPRIV_IOCTL_GSITESURVEY ioctl Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 05/12] Staging: rt28x0: remove private WEXT handlers Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 06/12] Staging: rt28x0: remove support for private driver parameters Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 07/12] Staging: rt28x0: remove optional loading of EEPROM from file in eFuse mode Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 08/12] Staging: rt28x0: fix some build warnings Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 09/12] Staging: rt28x0: remove optional cmm profile parameters Bartlomiej Zolnierkiewicz
2009-10-21 20:44 ` [PATCH 10/12] Staging: rt28x0: remove dead code from rtmp_phy.h Bartlomiej Zolnierkiewicz
2009-10-21 20:45 ` [PATCH 11/12] Staging: rt28x0: remove unused SHA256 code Bartlomiej Zolnierkiewicz
2009-10-21 20:45 ` [PATCH 12/12] Staging: rt28x0: remove dead code Bartlomiej Zolnierkiewicz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.