From: Tilman Schmidt <tilman@imap.cc>
To: David Miller <davem@davemloft.net>, Karsten Keil <isdn@linux-pingi.de>
Cc: Hansjoerg Lipp <hjlipp@web.de>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
isdn4linux@listserv.isdn4linux.de,
i4ldeveloper@listserv.isdn4linux.de
Subject: [PATCH 9/9] gigaset: convert strcmp chain to table lookup
Date: Sun, 25 Oct 2009 20:30:57 +0100 (CET) [thread overview]
Message-ID: <20091023-patch-gigaset-09.tilman@imap.cc> (raw)
In-Reply-To: <20091023-patch-gigaset-00.tilman@imap.cc>
Replace the sequence of strcmp calls for interpreting ZSAU parameter
strings by a table of known strings and lookup loop to improve
readability.
Impact: readability improvement, no functional change
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
---
drivers/isdn/gigaset/ev-layer.c | 42 +++++++++++++++++++++++---------------
drivers/isdn/gigaset/gigaset.h | 6 -----
2 files changed, 25 insertions(+), 23 deletions(-)
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index a9a3975..ddeb045 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -374,7 +374,11 @@ struct reply_t gigaset_tab_cid[] =
};
-static const struct resp_type_t resp_type[] =
+static const struct resp_type_t {
+ unsigned char *response;
+ int resp_code;
+ int type;
+} resp_type[] =
{
{"OK", RSP_OK, RT_NOTHING},
{"ERROR", RSP_ERROR, RT_NOTHING},
@@ -402,6 +406,20 @@ static const struct resp_type_t resp_type[] =
{NULL, 0, 0}
};
+static const struct zsau_resp_t {
+ unsigned char *str;
+ int code;
+} zsau_resp[] =
+{
+ {"OUTGOING_CALL_PROCEEDING", ZSAU_OUTGOING_CALL_PROCEEDING},
+ {"CALL_DELIVERED", ZSAU_CALL_DELIVERED},
+ {"ACTIVE", ZSAU_ACTIVE},
+ {"DISCONNECT_IND", ZSAU_DISCONNECT_IND},
+ {"NULL", ZSAU_NULL},
+ {"DISCONNECT_REQ", ZSAU_DISCONNECT_REQ},
+ {NULL, ZSAU_UNKNOWN}
+};
+
/*
* Get integer from char-pointer
*/
@@ -480,6 +498,7 @@ void gigaset_handle_modem_response(struct cardstate *cs)
int params;
int i, j;
const struct resp_type_t *rt;
+ const struct zsau_resp_t *zr;
int curarg;
unsigned long flags;
unsigned next, tail, head;
@@ -606,25 +625,14 @@ void gigaset_handle_modem_response(struct cardstate *cs)
event->parameter = ZSAU_NONE;
break;
}
- if (!strcmp(argv[curarg], "OUTGOING_CALL_PROCEEDING"))
- event->parameter =
- ZSAU_OUTGOING_CALL_PROCEEDING;
- else if (!strcmp(argv[curarg], "CALL_DELIVERED"))
- event->parameter = ZSAU_CALL_DELIVERED;
- else if (!strcmp(argv[curarg], "ACTIVE"))
- event->parameter = ZSAU_ACTIVE;
- else if (!strcmp(argv[curarg], "DISCONNECT_IND"))
- event->parameter = ZSAU_DISCONNECT_IND;
- else if (!strcmp(argv[curarg], "NULL"))
- event->parameter = ZSAU_NULL;
- else if (!strcmp(argv[curarg], "DISCONNECT_REQ"))
- event->parameter = ZSAU_DISCONNECT_REQ;
- else {
- event->parameter = ZSAU_UNKNOWN;
+ for (zr = zsau_resp; zr->str; ++zr)
+ if (!strcmp(argv[curarg], zr->str))
+ break;
+ event->parameter = zr->code;
+ if (!zr->str)
dev_warn(cs->dev,
"%s: unknown parameter %s after ZSAU\n",
__func__, argv[curarg]);
- }
++curarg;
break;
case RT_STRING:
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 3c74cd1..e963a6c 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -357,12 +357,6 @@ struct at_state_t {
struct bc_state *bcs;
};
-struct resp_type_t {
- unsigned char *response;
- int resp_code; /* RSP_XXXX */
- int type; /* RT_XXXX */
-};
-
struct event_t {
int type;
void *ptr, *arg;
--
1.6.2.1.214.ge986c
next prev parent reply other threads:[~2009-10-25 19:31 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-25 19:29 [PATCH 0/9] Gigaset driver patches for 2.6.33 Tilman Schmidt
2009-10-25 19:29 ` [PATCH 1/9] gigaset: CAPI module readability improvements Tilman Schmidt
2009-10-25 19:29 ` [PATCH 2/9] gigaset: fix format string typo in CAPI dial command Tilman Schmidt
2009-10-25 19:29 ` [PATCH 3/9] gigaset: fix bad assumptions about CAPI skbuffs Tilman Schmidt
2009-10-25 19:30 ` [PATCH 4/9] usb_gigaset: code cleanup Tilman Schmidt
2009-10-25 19:30 ` [PATCH 5/9] gigaset: checkpatch cleanup Tilman Schmidt
2009-10-25 19:30 ` [PATCH 6/9] ser_gigaset: " Tilman Schmidt
2009-10-25 20:37 ` Alan Cox
2009-10-25 23:36 ` Tilman Schmidt
2009-10-26 0:54 ` Joe Perches
2009-10-26 23:59 ` Tilman Schmidt
2009-10-27 0:14 ` Joe Perches
2009-10-27 10:20 ` Karsten Keil
2009-10-25 19:30 ` [PATCH 7/9] bas_gigaset: " Tilman Schmidt
2009-10-25 19:30 ` [PATCH 8/9] gigaset: checkpatch cleanup of ev-layer.c Tilman Schmidt
2009-10-25 19:30 ` Tilman Schmidt [this message]
2009-10-29 8:37 ` [PATCH 0/9] Gigaset driver patches for 2.6.33 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091023-patch-gigaset-09.tilman@imap.cc \
--to=tilman@imap.cc \
--cc=davem@davemloft.net \
--cc=hjlipp@web.de \
--cc=i4ldeveloper@listserv.isdn4linux.de \
--cc=isdn4linux@listserv.isdn4linux.de \
--cc=isdn@linux-pingi.de \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.