All of lore.kernel.org
 help / color / mirror / Atom feed
* RFC: Geode machines support changes
@ 2009-11-17 12:37 Marcin Juszkiewicz
  2009-11-17 13:23 ` Stefan Schmidt
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Marcin Juszkiewicz @ 2009-11-17 12:37 UTC (permalink / raw)
  To: openembedded-devel


Hi

Currently .dev tree supports AMD GeodeGX and GeodeLX based machines:

- "geodegx"        - generic config
- "iei-nanogx-466" - IEI Nano GX-466

- "geodelx"        - generic config
- "alix"           - PC Engines Alix 1c/d mainboard
- "xo"             - OLPC XO v1

For "geodegx" we have linux-geodegx-2.4.24 kernel which was added with 
machine. Looks like no one use it and we got linux-2.6.31 update some time ago 
from Petr Štetiar (who works on "iei-nanogx-466" SBC). Update needs to be 
selected in machine config anyway and is not yet building.

For "geodelx" we use linux-geodelx-2.6.11 which also was added with machine. 
Other good device with this CPU is "alix" which is now set to linux-2.6.25 as 
I did not booted this board for quite long time. OLPC is 3rd device with this 
CPU which we support.

GeodeLX processor is i586 class. Has MMX, 3Dnow and few other flags from that 
family. We treat it as i486 anyway as someone noted that they are faster that 
way.

I would like to do few changes:

1. drop "geodelx" kernel and machine config.
2. rename "alix" to "geodelx" and use Alix defconfig
3. move all target related flags from machine configs to tune-geode.inc
   - TARGET_ARCH
   - glibc tune (GLIBC_ADDONS, GLIBC_EXTRA_OECONF)

Then we can consider changing TARGET_ARCH to i586 for Geode machines.

Opinions? suggestions?

Regards, 
-- 
JID:      hrw@jabber.org
Website:  http://marcin.juszkiewicz.com.pl/
LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz





^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: RFC: Geode machines support changes
  2009-11-17 12:37 RFC: Geode machines support changes Marcin Juszkiewicz
@ 2009-11-17 13:23 ` Stefan Schmidt
  2009-11-17 14:02 ` Marcin Juszkiewicz
  2009-11-17 15:22 ` Petr Štetiar
  2 siblings, 0 replies; 5+ messages in thread
From: Stefan Schmidt @ 2009-11-17 13:23 UTC (permalink / raw)
  To: openembedded-devel

Hallo.

On Tue, 2009-11-17 at 13:37, Marcin Juszkiewicz wrote:
>
> - "xo"             - OLPC XO v1

As I added this I skip in here.

> I would like to do few changes:
> 
> 1. drop "geodelx" kernel and machine config.
> 2. rename "alix" to "geodelx" and use Alix defconfig
> 3. move all target related flags from machine configs to tune-geode.inc
>    - TARGET_ARCH
>    - glibc tune (GLIBC_ADDONS, GLIBC_EXTRA_OECONF)
> 
> Then we can consider changing TARGET_ARCH to i586 for Geode machines.
> 
> Opinions? suggestions?

I have no problems with this. I haven't tested with my XO for quite some time
and I don't think anyone else is doing it. From my side just go ahead and we can
fix problems later if they occur.

regards
Stefan Schmidt



^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: RFC: Geode machines support changes
  2009-11-17 12:37 RFC: Geode machines support changes Marcin Juszkiewicz
  2009-11-17 13:23 ` Stefan Schmidt
@ 2009-11-17 14:02 ` Marcin Juszkiewicz
  2009-11-17 14:08   ` Otavio Salvador
  2009-11-17 15:22 ` Petr Štetiar
  2 siblings, 1 reply; 5+ messages in thread
From: Marcin Juszkiewicz @ 2009-11-17 14:02 UTC (permalink / raw)
  To: openembedded-devel

Dnia wtorek, 17 listopada 2009 o 13:37:17 Marcin Juszkiewicz napisał(a):

> GeodeLX processor is i586 class. Has MMX, 3Dnow and few other flags from
>  that family. We treat it as i486 anyway as someone noted that they are
>  faster that way.
> 
> I would like to do few changes:
> 
> 1. drop "geodelx" kernel and machine config.
> 2. rename "alix" to "geodelx" and use Alix defconfig
> 3. move all target related flags from machine configs to tune-geode.inc
>    - TARGET_ARCH
>    - glibc tune (GLIBC_ADDONS, GLIBC_EXTRA_OECONF)
  4. move "geodegx" to linux-2.6.31 with copy of "iei-nanogx-466" defconfig

> Then we can consider changing TARGET_ARCH to i586 for Geode machines.

I found one problem with it. Currently we have some geode machines as i586 and 
some as i486 but packages are generated with "geode" arch each time. Same for 
tmp/cross/ dir etc. So we will need to decide for all devices at once.

Regards, 
-- 
JID:      hrw@jabber.org
Website:  http://marcin.juszkiewicz.com.pl/
LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz





^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: RFC: Geode machines support changes
  2009-11-17 14:02 ` Marcin Juszkiewicz
@ 2009-11-17 14:08   ` Otavio Salvador
  0 siblings, 0 replies; 5+ messages in thread
From: Otavio Salvador @ 2009-11-17 14:08 UTC (permalink / raw)
  To: openembedded-devel

Hello,

On Tue, Nov 17, 2009 at 12:02 PM, Marcin Juszkiewicz
<marcin@juszkiewicz.com.pl> wrote:
> I found one problem with it. Currently we have some geode machines as i586 and
> some as i486 but packages are generated with "geode" arch each time. Same for
> tmp/cross/ dir etc. So we will need to decide for all devices at once.

I think the way to go is to test if gx is compatible with i586 and
then check of performance lose with it. Then we see if:

 - we can merge geodelx and geodegx?
 - we need to have geodelx and geodegx with different base arch?

-- 
Otavio Salvador                  O.S. Systems
E-mail: otavio@ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854         http://projetos.ossystems.com.br



^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: RFC: Geode machines support changes
  2009-11-17 12:37 RFC: Geode machines support changes Marcin Juszkiewicz
  2009-11-17 13:23 ` Stefan Schmidt
  2009-11-17 14:02 ` Marcin Juszkiewicz
@ 2009-11-17 15:22 ` Petr Štetiar
  2 siblings, 0 replies; 5+ messages in thread
From: Petr Štetiar @ 2009-11-17 15:22 UTC (permalink / raw)
  To: openembedded-devel

Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> [2009-11-17 13:37:17]:

> Hi

Hi,

> 3. move all target related flags from machine configs to tune-geode.inc
>    - TARGET_ARCH
>    - glibc tune (GLIBC_ADDONS, GLIBC_EXTRA_OECONF)

It's fine with me.

> Then we can consider changing TARGET_ARCH to i586 for Geode machines.

I don't have time(maybe this weekend) to do a benchmark of 486 vs 586 build,
but 586 was fast enough for me on IEI NanoGX, so I wasn't looking for any
optmizations. 

-- ynezz



^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2009-11-17 15:23 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-11-17 12:37 RFC: Geode machines support changes Marcin Juszkiewicz
2009-11-17 13:23 ` Stefan Schmidt
2009-11-17 14:02 ` Marcin Juszkiewicz
2009-11-17 14:08   ` Otavio Salvador
2009-11-17 15:22 ` Petr Štetiar

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.